[ Upstream commit e93bb4b76c ]
Since commit 6e690d54cf ("serial: 8250: fix return error code in
serial8250_request_std_resource()"), registering an 8250 MMIO port
without mapbase no longer works, as the resource range is derived from
mapbase/mapsize.
Populate mapbase and mapsize accordingly. Also drop ugly membase KSEG1
pointer and set UPF_IOREMAP instead, letting the 8250 core perform the
ioremap.
Fixes: 6e690d54cf ("serial: 8250: fix return error code in serial8250_request_std_resource()")
Cc: stable@vger.kernel.org
Reported-by: Waldemar Brodkorb <wbx@openadk.org>
Link: https://lore.kernel.org/linux-mips/aX-d0ShTplHKZT33@waldemar-brodkorb.de/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96c4af4185 ]
We used to use the cifs_tcp_ses_lock to protect a lot of objects
that are not just the server, ses or tcon lists. We later introduced
srv_lock, ses_lock and tc_lock to protect fields within the
corresponding structs. This was done to provide a more granular
protection and avoid unnecessary serialization.
There were still a couple of uses of cifs_tcp_ses_lock to provide
tcon fields. In this patch, I've replaced them with tc_lock.
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efdc383d1c ]
The LPI2C controller sends a NACK at the end of a receive command
unless another receive command is already queued in MTDR. During
SMBus block reads, this causes the controller to NACK immediately
after receiving the block length byte, aborting the transfer before
the data bytes are read.
Fix this by queueing a second receive command as soon as the block
length byte is received, keeping MTDR non-empty and ensuring
continuous ACKs. The initial receive command reads the block length,
and the subsequent command reads the remaining data bytes according
to the reported length.
Fixes: a55fa9d0e4 ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260123105459.3448822-1-carlos.song@nxp.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cafe4074a7 ]
cpustat_tail indexes cpustat_util[], which is a NUM_SAMPLE_PERIODS-sized
ring buffer. need_counting_irqs() currently wraps the index using
NUM_HARDIRQ_REPORT, which only happens to match NUM_SAMPLE_PERIODS.
Use NUM_SAMPLE_PERIODS for the wrap to keep the ring math correct even if
the NUM_HARDIRQ_REPORT or NUM_SAMPLE_PERIODS changes.
Link: https://lkml.kernel.org/r/tencent_7068189CB6D6689EB353F3D17BF5A5311A07@qq.com
Fixes: e9a9292e23 ("watchdog/softlockup: Report the most frequent interrupts")
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhang Run <zhang.run@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dc052234d ]
Enabling KCSAN is causing a large number of duplicate types in BTF for
core kernel structs like task_struct [1]. This is due to the definition
in include/linux/compiler_types.h
`#ifdef __SANITIZE_THREAD__
...
`#define __data_racy volatile
..
`#else
...
`#define __data_racy
...
`#endif
Because some objects in the kernel are compiled without KCSAN flags
(KCSAN_SANITIZE) we sometimes get the empty __data_racy annotation for
objects; as a result we get multiple conflicting representations of the
associated structs in DWARF, and these lead to multiple instances of core
kernel types in BTF since they cannot be deduplicated due to the
additional modifier in some instances.
Moving the __data_racy definition under CONFIG_KCSAN avoids this problem,
since the volatile modifier will be present for both KCSAN and
KCSAN_SANITIZE objects in a CONFIG_KCSAN=y kernel.
Link: https://lkml.kernel.org/r/20260116091730.324322-1-alan.maguire@oracle.com
Fixes: 31f605a308 ("kcsan, compiler_types: Introduce __data_racy type qualifier")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Bart van Assche <bvanassche@acm.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Naman Jain <namjain@linux.microsoft.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41460a1965 ]
The variable pwlan has the possibility of being NULL when passed into
rtw_free_network_nolock() which would later dereference the variable.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260202205429.20181-1-ethantidmore06@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d191101dee ]
Syzkaller managed to find a combination of actions that was generating
this warning:
WARNING: net/mptcp/pm_kernel.c:1074 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538, CPU#1: syz.7.48/2535
Modules linked in:
CPU: 1 UID: 0 PID: 2535 Comm: syz.7.48 Not tainted 6.18.0-03987-gea5f5e676cf5 #17 PREEMPT(voluntary)
Hardware name: QEMU Ubuntu 25.10 PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline]
RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline]
RIP: 0010:mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline]
RIP: 0010:mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538
Code: 89 c7 e8 c5 8c 73 fe e9 f7 fd ff ff 49 83 ef 80 e8 b7 8c 73 fe 4c 89 ff be 03 00 00 00 e8 4a 29 e3 fe eb ac e8 a3 8c 73 fe 90 <0f> 0b 90 e9 3d ff ff ff e8 95 8c 73 fe b8 a1 ff ff ff eb 1a e8 89
RSP: 0018:ffffc9001535b820 EFLAGS: 00010287
netdevsim0: tun_chr_ioctl cmd 1074025677
RAX: ffffffff82da294d RBX: 0000000000000001 RCX: 0000000000080000
RDX: ffffc900096d0000 RSI: 00000000000006d6 RDI: 00000000000006d7
netdevsim0: linktype set to 823
RBP: ffff88802cdb2240 R08: 00000000000104ae R09: ffffffffffffffff
R10: ffffffff82da27d4 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88801246d8c0 R14: ffffc9001535b8b8 R15: ffff88802cdb1800
FS: 00007fc6ac5a76c0(0000) GS:ffff8880f90c8000(0000) knlGS:0000000000000000
netlink: 'syz.3.50': attribute type 5 has an invalid length.
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
netlink: 1232 bytes leftover after parsing attributes in process `syz.3.50'.
CR2: 0000200000010000 CR3: 0000000025b1a000 CR4: 0000000000350ef0
Call Trace:
<TASK>
mptcp_pm_set_flags net/mptcp/pm_netlink.c:277 [inline]
mptcp_pm_nl_set_flags_doit+0x1d7/0x210 net/mptcp/pm_netlink.c:282
genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x4ab/0x5b0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0xc9/0xf0 net/socket.c:733
____sys_sendmsg+0x272/0x3b0 net/socket.c:2608
___sys_sendmsg+0x2de/0x320 net/socket.c:2662
__sys_sendmsg net/socket.c:2694 [inline]
__do_sys_sendmsg net/socket.c:2699 [inline]
__se_sys_sendmsg net/socket.c:2697 [inline]
__x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2697
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xed/0x360 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc6adb66f6d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fc6ac5a6ff8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fc6addf5fa0 RCX: 00007fc6adb66f6d
RDX: 0000000000048084 RSI: 00002000000002c0 RDI: 000000000000000e
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
netlink: 'syz.5.51': attribute type 2 has an invalid length.
R13: 00007fff25e91fe0 R14: 00007fc6ac5a7ce4 R15: 00007fff25e920d7
</TASK>
The actions that caused that seem to be:
- Create an MPTCP endpoint for address A without any flags
- Create a new MPTCP connection from address A
- Remove the MPTCP endpoint: the corresponding subflows will be removed
- Recreate the endpoint with the same ID, but with the subflow flag
- Change the same endpoint to add the fullmesh flag
In this case, msk->pm.local_addr_used has been kept to 0 as expected,
but the corresponding bit in msk->pm.id_avail_bitmap was still unset
after having removed the endpoint, causing the splat later on.
When removing an endpoint, the corresponding endpoint ID was only marked
as available for "signal" types with an announced address, plus all
"subflow" types, but not the other types like an endpoint corresponding
to the initial subflow. In these cases, re-creating an endpoint with the
same ID didn't signal/create anything. Here, adding the fullmesh flag
was creating the splat when calling __mark_subflow_endp_available() from
mptcp_pm_nl_fullmesh(), because msk->pm.local_addr_used was set to 0
while the ID was marked as used.
To fix this issue, the corresponding bit in msk->pm.id_avail_bitmap can
always be set as available when removing an MPTCP in-kernel endpoint. In
other words, moving the call to __set_bit() to do it in all cases,
except for "subflow" types where this bit is handled in a dedicated
helper.
Note: instead of adding a new spin_(un)lock_bh that would be taken in
all cases, do all the actions requiring the spin lock under the same
block.
This modification potentially fixes another issue reported by syzbot,
see [1]. But without a reproducer or more details about what exactly
happened before, it is hard to confirm.
Fixes: e255683c06 ("mptcp: pm: re-using ID of unused removed ADD_ADDR")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/606
Reported-by: syzbot+f56f7d56e2c6e11a01b6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/68fcfc4a.050a0220.346f24.02fb.GAE@google.com [1]
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260205-net-mptcp-misc-fixes-6-19-rc8-v2-1-c2720ce75c34@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcf69599c4 ]
If device_register() fails, put_device() is the correct way to
drop the device reference.
Found by code review.
Fixes: 1070c9655b ("[PA-RISC] Fix must_check warnings in drivers.c")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9368d1ee62 ]
Commit a4e772898f ("PCI: Add missing bridge lock to pci_bus_lock()")
delegates the bridge device's pci_dev_trylock() to pci_bus_trylock() in
pci_slot_trylock(), but it forgets to remove the corresponding
pci_dev_unlock() when pci_bus_trylock() fails.
Before a4e772898f, the code did:
if (!pci_dev_trylock(dev)) /* <- lock bridge device */
goto unlock;
if (dev->subordinate) {
if (!pci_bus_trylock(dev->subordinate)) {
pci_dev_unlock(dev); /* <- unlock bridge device */
goto unlock;
}
}
After a4e772898f the bridge-device lock is no longer taken, but the
pci_dev_unlock(dev) on the failure path was left in place, leading to the
bug.
This yields one of two errors:
1. A warning that the lock is being unlocked when no one holds it.
2. An incorrect unlock of a lock that belongs to another thread.
Fix it by removing the now-redundant pci_dev_unlock(dev) on the failure
path.
[Same patch later posted by Keith at
https://patch.msgid.link/20260116184150.3013258-1-kbusch@meta.com]
Fixes: a4e772898f ("PCI: Add missing bridge lock to pci_bus_lock()")
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251212145528.2555-1-guojinhui.liam@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ecc1bf14e ]
The commit 8278c69143 ("PCI: Preserve bridge window resource type flags")
changed bridge window resource behavior such that flags are no longer zero
if the bridge window is not valid or is disabled (mainly to preserve the
type flags for later use). If a bridge window has its limit smaller than
base address, pci_read_bridge_*() sets both IORESOURCE_UNSET and
IORESOURCE_DISABLED to indicate the bridge window exists but is not valid
with the current base and limit configuration.
The code in pci_claim_bridge_resources() still depends on the old behavior
of checking validity of the bridge window solely based on !r->flags,
whereas after 8278c69143, also IORESOURCE_DISABLED may indicate bridge
window addresses are not valid.
While pci_claim_resource() does check IORESOURCE_UNSET,
pci_claim_bridge_resource() attempts to clip the resource if
pci_claim_resource() fails, which is not correct for bridge window
resources that are not valid. As pci_bus_clip_resource() performs clipping
regardless of flags and then clears IORESOURCE_UNSET, it should not be
called unless the resource is valid.
The problem is visible in this log:
pci 0000:20:00.0: PCI bridge to [bus 21]
pci 0000:20:00.0: bridge window [io size 0x0000 disabled]: can't claim; no address assigned
pci 0000:20:00.0: [io 0x0000-0xffffffffffffffff disabled] clipped to [io 0x0000-0xffff disabled]
Add IORESOURCE_DISABLED check in pci_claim_bridge_resources() to only
claim bridge windows that appear to have a valid configuration.
Fixes: 8278c69143 ("PCI: Preserve bridge window resource type flags")
Reported-by: Sizhe Liu <liusizhe5@huawei.com>
Link: https://lore.kernel.org/all/20260203023545.2753811-1-liusizhe5@huawei.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/4d9228d6-a230-6ddf-e300-fbf42d523863@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d724b34fb ]
If an error occurs during register_netdev() for the first MAC in
cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL,
cpsw->slaves[1].ndev would remain unchanged. This could later cause
cpsw_unregister_ports() to attempt unregistering the second MAC.
To address this, add a check for ndev->reg_state before calling
unregister_netdev(). With this change, setting cpsw->slaves[i].ndev
to NULL becomes unnecessary and can be removed accordingly.
Fixes: ed3525eda4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20260205-cpsw-error-path-v1-2-6e58bae6b299@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62db84b7ef ]
The current error handling in cpsw_probe() has two issues:
- cpsw_unregister_ports() may be called before cpsw_register_ports() has
been executed.
- cpsw_unregister_ports() is already invoked within cpsw_register_ports()
in case of a register_netdev() failure, but the error path would call
it again.
Fixes: ed3525eda4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20260205-cpsw-error-path-v1-1-6e58bae6b299@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a70a26c9f ]
The kfd_event_page_set() function writes KFD_SIGNAL_EVENT_LIMIT * 8
bytes via memset without checking the buffer size parameter. This allows
unprivileged userspace to trigger an out-of bounds kernel memory write
by passing a small buffer, leading to potential privilege
escalation.
Signed-off-by: Sunday Clement <Sunday.Clement@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a65c0cb0f ]
tipc_aead_users_dec() calls rcu_dereference(aead) twice: once to store
in 'tmp' for the NULL check, and again inside the atomic_add_unless()
call.
Use the already-dereferenced 'tmp' pointer consistently, matching the
correct pattern used in tipc_aead_users_inc() and tipc_aead_users_set().
Fixes: fc1b6d6de2 ("tipc: introduce TIPC encryption & authentication")
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Hodges <hodgesd@meta.com>
Link: https://patch.msgid.link/20260203145621.17399-1-git@danielhodges.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89b831ebda ]
We need to set also write_page_raw in ecc structure to allow
choosing SW ECC instead of HW one, otherwise write operation fail.
Fixes: 08d8c62164 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Cc: stable@kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a52e4f2dff ]
commit 13b1f8e25b ("usb: dwc2: Force mode optimizations") removed the
dwc2_force_mode(hsotg, true) in dwc2_force_dr_mode() if dr_mode is host.
But this brings a bug: the controller fails to resume back as host,
further debugging shows that the controller is resumed as peripheral.
The reason is dwc2_force_dr_mode() missed the host mode forcing, and
when resuming from s2ram, GINTSTS is 0 by default, dwc2_is_device_mode
in dwc2_resume() misreads this as the controller is in peripheral mode.
Fix the resume failure by adding back the dwc2_force_mode(hsotg, true).
Then an obvious question is: why this bug hasn't been observed and fixed
for about six years? There are two resons: most dwc2 platforms set the
dr_mode as otg; Some platforms don't have suspend & resume support yet.
Fixes: 13b1f8e25b ("usb: dwc2: Force mode optimizations")
Cc: stable <stable@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260129021534.10411-1-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54aaa3b387 ]
Currently dwc3_gadget_vbus_draw() can be called from atomic
context, which in turn invokes power-supply-core APIs. And
some these PMIC APIs have operations that may sleep, leading
to kernel panic.
Fix this by moving the vbus_draw into a workqueue context.
Fixes: 99288de360 ("usb: dwc3: add an alternate path in vbus_draw callback")
Cc: stable <stable@kernel.org>
Tested-by: Samuel Wu <wusamuel@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204054155.3063825-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c4ae63073 ]
The mmio regmap that may be allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: 61de83fd82 ("mux: mmio: Do not use syscon helper to build regmap")
Cc: stable@vger.kernel.org # 6.16
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20251127134702.1915-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58fbf08935 ]
When dw_pcie_iatu_setup() configures outbound address translation for both
type PCIE_ATU_TYPE_MEM and PCIE_ATU_TYPE_IO, the iATU index to use is
incremented before calling dw_pcie_prog_outbound_atu().
However for msg_atu_index, the index is not incremented before use,
causing the iATU index to be the same as the last configured iATU index,
which means that it will incorrectly use the same iATU index that is
already in use, breaking outbound address translation.
In total there are three problems with this code:
-It assigns msg_atu_index the same index that was used for the last
outbound address translation window, rather than incrementing the index
before assignment.
-The index should only be incremented (and msg_atu_index assigned) if the
use_atu_msg feature is actually requested/in use (pp->use_atu_msg is set).
-If the use_atu_msg feature is requested/in use, and there are no outbound
iATUs available, the code should return an error, as otherwise when this
this feature is used, it will use an iATU index that is out of bounds.
Fixes: e1a4ec1a95 ("PCI: dwc: Add generic MSG TLP support for sending PME_Turn_Off when system suspend")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Zhang <zhanghuabing@ecosda.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260127151038.1484881-6-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32ec465103 ]
Loongson2ef reserves io range below 0x4000 (LOONGSON_PCI_IO_START) while
ISA-mode only IDE controller on the south bridge still has a hard
dependency on ISA IO ports.
The reservation was done by lifting loongson_pci_io_resource.start onto
0x4000. Prior to commit ae81aad5c2 ("MIPS: PCI: Use
pci_enable_resources()"), the arch specific pcibios_enable_resources()
did not check if the resources were claimed, which diverges from what
PCI core checks, effectively hiding the fact that IDE IO resources were
not properly within the resource tree. After starting to use
pcibios_enable_resources() from PCI core, enabling IDE controller fails:
pata_cs5536 0000:00:0e.2: BAR 0 [io 0x01f0-0x01f7]: not claimed; can't enable device
pata_cs5536 0000:00:0e.2: probe with driver pata_cs5536 failed with error -22
MIPS PCI code already has support for enforcing lower bounds using
PCIBIOS_MIN_IO in pcibios_align_resource() without altering the IO
window start address itself. Make Loongson2ef PCI code use
PCIBIOS_MIN_IO too.
Fixes: ae81aad5c2 ("MIPS: PCI: Use pci_enable_resources()")
Cc: stable@vger.kernel.org
Tested-by: Beiyan Yun <root@infi.wang>
Tested-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Rong Zhang <rongrong@oss.cipunited.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a00c043af ]
We are about to set loongson_pci_io_resource.start to 0 and adopt
PCIBIOS_MIN_IO. As the first step, PCI controller needs to be registered
in early stage to make it the root of other resources (e.g., i8259) and
prevent resource conflicts.
Register it in plat_mem_setup() instead of arch_initcall().
Fixes: ae81aad5c2 ("MIPS: PCI: Use pci_enable_resources()")
Cc: stable@vger.kernel.org
Tested-by: Beiyan Yun <root@infi.wang>
Tested-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Rong Zhang <rongrong@oss.cipunited.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b85f369b81 ]
When both KASAN and SLAB_STORE_USER are enabled, accesses to
struct kasan_alloc_meta fields can be misaligned on 64-bit architectures.
This occurs because orig_size is currently defined as unsigned int,
which only guarantees 4-byte alignment. When struct kasan_alloc_meta is
placed after orig_size, it may end up at a 4-byte boundary rather than
the required 8-byte boundary on 64-bit systems.
Note that 64-bit architectures without HAVE_EFFICIENT_UNALIGNED_ACCESS
are assumed to require 64-bit accesses to be 64-bit aligned.
See HAVE_64BIT_ALIGNED_ACCESS and commit adab66b71a ("Revert:
"ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS"") for more details.
Change orig_size from unsigned int to unsigned long to ensure proper
alignment for any subsequent metadata. This should not waste additional
memory because kmalloc objects are already aligned to at least
ARCH_KMALLOC_MINALIGN.
Closes: https://lore.kernel.org/all/aPrLF0OUK651M4dk@hyeyoo
Suggested-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 6edf2576a6 ("mm/slub: enable debugging memory wasting of kmalloc")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Closes: https://lore.kernel.org/all/aPrLF0OUK651M4dk@hyeyoo/
Link: https://patch.msgid.link/20260113061845.159790-2-harry.yoo@oracle.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 280ea9c315 ]
When allocating slabobj_ext array in alloc_slab_obj_exts(), the array
can be allocated from the same slab we're allocating the array for.
This led to obj_exts_in_slab() incorrectly returning true [1],
although the array is not allocated from wasted space of the slab.
Vlastimil Babka observed that this problem should be fixed even when
ignoring its incompatibility with obj_exts_in_slab(), because it creates
slabs that are never freed as there is always at least one allocated
object.
To avoid this, use the next kmalloc size or large kmalloc when
the array can be allocated from the same cache we're allocating
the array for.
In case of random kmalloc caches, there are multiple kmalloc caches
for the same size and the cache is selected based on the caller address.
Because it is fragile to ensure the same caller address is passed to
kmalloc_slab(), kmalloc_noprof(), and kmalloc_node_noprof(), bump the
size to (s->object_size + 1) when the sizes are equal, instead of
directly comparing the kmem_cache pointers.
Note that this doesn't happen when memory allocation profiling is
disabled, as when the allocation of the array is triggered by memory
cgroup (KMALLOC_CGROUP), the array is allocated from KMALLOC_NORMAL.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202601231457.f7b31e09-lkp@intel.com [1]
Cc: stable@vger.kernel.org
Fixes: 4b87369646 ("mm/slab: add allocation accounting into slab allocation and free paths")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260126125714.88008-1-harry.yoo@oracle.com
Reviewed-by: Hao Li <hao.li@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8ef441811 ]
Ensure that the exception event handling work is explicitly flushed during
suspend when the runtime power management level is set to UFS_PM_LVL_0.
When the RPM level is zero, the device power mode and link state both
remain active. Previously, the UFS core driver bypassed flushing exception
event handling jobs in this configuration. This created a race condition
where the driver could attempt to access the host controller to handle an
exception after the system had already entered a deep power-down state,
resulting in a system crash.
Explicitly flush this work and disable auto BKOPs before the suspend
callback proceeds. This guarantees that pending exception tasks complete
and prevents illegal hardware access during the power-down sequence.
Fixes: 57d104c153 ("ufs: add UFS power management support")
Signed-off-by: Thomas Yen <thomasyen@google.com>
Cc: Stable Tree <stable@vger.kernel.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260129165156.956601-1-thomasyen@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36c0de0257 ]
So far we've been fairly lax about accepting both unknown CMN models
(at least with a warning), and unknown revisions of those which we
do know, as although things do frequently change between releases,
typically enough remains the same to be somewhat useful for at least
some basic bringup checks. However, we also make assumptions of the
maximum supported sizes and numbers of things in various places, and
there's no guarantee that something new might not be bigger and lead
to nasty array overflows. Make sure we only try to run on things that
actually match our assumptions and so will not risk memory corruption.
We have at least always failed on completely unknown node types, so
update that error message for clarity and consistency too.
Cc: stable@vger.kernel.org
Fixes: 7819e05a0d ("perf/arm-cmn: Revamp model detection")
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26aa529501 ]
imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded
resource table even when the current firmware does not provide one.
When the device tree contains a "rsc-table" entry, priv->rsc_table is
non-NULL and denotes where a resource table would be located if one is
present in memory. However, when the current firmware has no resource
table, rproc->table_ptr is NULL. The function still returns
priv->rsc_table, and the remoteproc core interprets this as a valid loaded
resource table.
Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when
there is no resource table for the current firmware (i.e. when
rproc->table_ptr is NULL). This aligns the function's semantics with the
remoteproc core: a loaded resource table is only reported when a valid
table_ptr exists.
With this change, starting firmware without a resource table no longer
triggers a crash.
Fixes: e954a1bd16 ("remoteproc: imx_rproc: Use imx specific hook for find_loaded_rsc_table")
Cc: stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20260129-imx-rproc-fix-v3-1-fc4e41e6e750@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 912d1c6680 ]
Commit 93bba24d4b ("btrfs: Enhance btrfs_trim_fs function to handle
error better") intended to make device trimming continue even if one
device fails, tracking failures and reporting them at the end. However,
it used 'break' instead of 'continue', causing the loop to exit on the
first device failure.
Fix this by replacing 'break' with 'continue'.
Fixes: 93bba24d4b ("btrfs: Enhance btrfs_trim_fs function to handle error better")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: jinbaohong <jinbaohong@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2d848649e ]
When a block group is composed of a sequential write zone and a
conventional zone, we recover the (pseudo) write pointer of the
conventional zone using the end of the last allocated position.
However, if the last extent in a block group is removed, the last extent
position will be smaller than the other real write pointer position.
Then, that will cause an error due to mismatch of the write pointers.
We can fixup this case by moving the alloc_offset to the corresponding
write pointer position.
Fixes: c0d90a79e8 ("btrfs: zoned: fix alloc_offset calculation for partly conventional block groups")
CC: stable@vger.kernel.org # 6.16+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dda3ec9ee6 ]
When a block group is composed of a sequential write zone and a
conventional zone, we recover the (pseudo) write pointer of the
conventional zone using the end of the last allocated position.
However, if the last extent in a block group is removed, the last extent
position will be smaller than the other real write pointer position.
Then, that will cause an error due to mismatch of the write pointers.
We can fixup this case by moving the alloc_offset to the corresponding
write pointer position.
Fixes: 568220fa96 ("btrfs: zoned: support RAID0/1/10 on top of raid stripe tree")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19eff93dc7 ]
Problems with current implementation:
1. reclaimable_bytes is signed while chunk_sz is unsigned, causing
negative reclaimable_bytes to trigger reclaim unexpectedly
2. The "space must be freed between scans" assumption breaks the
two-scan requirement: first scan marks block groups, second scan
reclaims them. Without the second scan, no reclamation occurs.
Instead, track actual reclaim progress: pause reclaim when block groups
will be reclaimed, and resume only when progress is made. This ensures
reclaim continues until no further progress can be made. And resume
periodic reclaim when there's enough free space.
And we take care if reclaim is making any progress now, so it's
unnecessary to set periodic_reclaim_ready to false when failed to reclaim
a block group.
Fixes: 813d4c6422 ("btrfs: prevent pathological periodic reclaim loops")
CC: stable@vger.kernel.org # 6.12+
Suggested-by: Boris Burkov <boris@bur.io>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Sun YangKai <sunk67188@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ec820fc28 ]
The 9FGV0841 has 8 outputs and registers 8 struct clk_hw, make sure
there are 8 slots for those newly registered clk_hw pointers, else
there is going to be out of bounds write when pointers 4..7 are set
into struct rs9_driver_data .clk_dif[4..7] field.
Since there are other structure members past this struct clk_hw
pointer array, writing to .clk_dif[4..7] fields corrupts both
the struct rs9_driver_data content and data around it, sometimes
without crashing the kernel. However, the kernel does surely
crash when the driver is unbound or during suspend.
Fix this, increase the struct clk_hw pointer array size to the
maximum output count of 9FGV0841, which is the biggest chip that
is supported by this driver.
Cc: stable@vger.kernel.org
Fixes: f0e5e18002 ("clk: rs9: Add support for 9FGV0841")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/CAMuHMdVyQpOBT+Ho+mXY07fndFN9bKJdaaWGn91WOFnnYErLyg@mail.gmail.com
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a56a38fd91 ]
The list_for_each_entry_rcu() in filter_chain() uses
rcu_read_lock_trace_held() as the lockdep condition, but the function
holds consumer_rwsem, not the RCU trace lock.
This gives me the following output when running with some locking debug
option enabled:
kernel/events/uprobes.c:1141 RCU-list traversed in non-reader section!!
filter_chain
register_for_each_vma
uprobe_unregister_nosync
__probe_event_disable
Remove the incorrect lockdep condition since the rwsem provides
sufficient protection for the list traversal.
Fixes: cc01bd044e ("uprobes: travers uprobe's consumer list locklessly under SRCU protection")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260128-uprobe_rcu-v2-1-994ea6d32730@debian.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb0c99e08a ]
The implementation of __READ_ONCE() under CONFIG_LTO=y incorrectly
qualified the fallback "once" access for types larger than 8 bytes,
which are not atomic but should still happen "once" and suppress common
compiler optimizations.
The cast `volatile typeof(__x)` applied the volatile qualifier to the
pointer type itself rather than the pointee. This created a volatile
pointer to a non-volatile type, which violated __READ_ONCE() semantics.
Fix this by casting to `volatile typeof(*__x) *`.
With a defconfig + LTO + debug options build, we see the following
functions to be affected:
xen_manage_runstate_time (884 -> 944 bytes)
xen_steal_clock (248 -> 340 bytes)
^-- use __READ_ONCE() to load vcpu_runstate_info structs
Fixes: e35123d83e ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y")
Cc: stable@vger.kernel.org
Reviewed-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Tested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5338e365c ]
Commit 05703271c3 ("PCI/IOV: Add PCI rescan-remove locking when
enabling/disabling SR-IOV") tried to fix a race between the VF removal
inside sriov_del_vfs() and concurrent hot unplug by taking the PCI
rescan/remove lock in sriov_del_vfs(). Similarly the PCI rescan/remove lock
was also taken in sriov_add_vfs() to protect addition of VFs.
This approach however causes deadlock on trying to remove PFs with SR-IOV
enabled because PFs disable SR-IOV during removal and this removal happens
under the PCI rescan/remove lock. So the original fix had to be reverted.
Instead of taking the PCI rescan/remove lock in sriov_add_vfs() and
sriov_del_vfs(), fix the race that occurs with SR-IOV enable and disable vs
hotplug higher up in the callchain by taking the lock in
sriov_numvfs_store() before calling into the driver's sriov_configure()
callback.
Fixes: 05703271c3 ("PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV")
Reported-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251216-revert_sriov_lock-v3-2-dac4925a7621@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fa119c0e5 ]
This reverts commit 05703271c3 ("PCI/IOV: Add PCI rescan-remove locking
when enabling/disabling SR-IOV"), which causes a deadlock by recursively
taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of
pci_stop_and_remove_bus_device(). For example with the following sequence
of commands:
$ echo <NUM> > /sys/bus/pci/devices/<pf>/sriov_numvfs
$ echo 1 > /sys/bus/pci/devices/<pf>/remove
A trimmed trace of the deadlock on a mlx5 device is as below:
zsh/5715 is trying to acquire lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140
but task is already holding lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80
...
Call Trace:
[<00000259778c4f90>] dump_stack_lvl+0xc0/0x110
[<00000259779c844e>] print_deadlock_bug+0x31e/0x330
[<00000259779c1908>] __lock_acquire+0x16c8/0x32f0
[<00000259779bffac>] lock_acquire+0x14c/0x350
[<00000259789643a6>] __mutex_lock_common+0xe6/0x1520
[<000002597896413c>] mutex_lock_nested+0x3c/0x50
[<00000259784a07e4>] sriov_disable+0x34/0x140
[<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core]
[<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core]
[<00000259784857fc>] pci_device_remove+0x3c/0xa0
[<000002597851012e>] device_release_driver_internal+0x18e/0x280
[<000002597847ae22>] pci_stop_bus_device+0x82/0xa0
[<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80
[<00000259784972c2>] remove_store+0x72/0x90
[<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200
[<0000025977d7241c>] vfs_write+0x24c/0x300
[<0000025977d72696>] ksys_write+0x86/0x110
[<000002597895b61c>] __do_syscall+0x14c/0x400
[<000002597896e0ee>] system_call+0x6e/0x90
This alone is not a complete fix as it restores the issue the cited commit
tried to solve. A new fix will be provided as a follow on.
Fixes: 05703271c3 ("PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV")
Reported-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Acked-by: Gerd Bayer <gbayer@linux.ibm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251216-revert_sriov_lock-v3-1-dac4925a7621@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 427b2535f5 ]
kho_reserve_scratch() iterates over all online NUMA nodes to allocate
per-node scratch memory. On systems with memoryless NUMA nodes (nodes
that have CPUs but no memory), memblock_alloc_range_nid() fails because
there is no memory available on that node. This causes KHO initialization
to fail and kho_enable to be set to false.
Some ARM64 systems have NUMA topologies where certain nodes contain only
CPUs without any associated memory. These configurations are valid and
should not prevent KHO from functioning.
Fix this by only counting nodes that have memory (N_MEMORY state) and skip
memoryless nodes in the per-node scratch allocation loop.
Link: https://lkml.kernel.org/r/20260120175913.34368-1-epetron@amazon.de
Fixes: 3dc92c3114 ("kexec: add Kexec HandOver (KHO) generation helpers").
Signed-off-by: Evangelos Petrongonas <epetron@amazon.de>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96a54b8ffc ]
crash_load_dm_crypt_keys() reads dm-crypt volume keys from the user
keyring. It uses user_key_payload_locked() without holding key->sem,
which makes lockdep complain when kexec_file_load() assembles the crash
image:
=============================
WARNING: suspicious RCU usage
-----------------------------
./include/keys/user-type.h:53 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by kexec/4875.
stack backtrace:
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
lockdep_rcu_suspicious.cold+0x4e/0x96
crash_load_dm_crypt_keys+0x314/0x390
bzImage64_load+0x116/0x9a0
? __lock_acquire+0x464/0x1ba0
__do_sys_kexec_file_load+0x26a/0x4f0
do_syscall_64+0xbd/0x430
entry_SYSCALL_64_after_hwframe+0x77/0x7f
In addition, the key returned by request_key() is never key_put()'d,
leaking a key reference on each load attempt.
Take key->sem while copying the payload and drop the key reference
afterwards.
Link: https://lkml.kernel.org/r/patch.git-2d4d76083a5c.your-ad-here.call-01769426386-ext-2560@work.hours
Fixes: 479e58549b ("crash_dump: store dm crypt keys in kdump reserved memory")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 480e1d5c64 ]
kexec_load_purgatory() derives image->start by locating e_entry inside an
SHF_EXECINSTR section. If the purgatory object contains multiple
executable sections with overlapping sh_addr, the entrypoint check can
match more than once and trigger a WARN.
Derive the entry section from the purgatory_start symbol when present and
compute image->start from its final placement. Keep the existing e_entry
fallback for purgatories that do not expose the symbol.
WARNING: kernel/kexec_file.c:1009 at kexec_load_purgatory+0x395/0x3c0, CPU#10: kexec/1784
Call Trace:
<TASK>
bzImage64_load+0x133/0xa00
__do_sys_kexec_file_load+0x2b3/0x5c0
do_syscall_64+0x81/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[me@linux.beauty: move helper to avoid forward declaration, per Baoquan]
Link: https://lkml.kernel.org/r/20260128043511.316860-1-me@linux.beauty
Link: https://lkml.kernel.org/r/20260120124005.148381-1-me@linux.beauty
Fixes: 8652d44f46 ("kexec: support purgatories with .text.hot sections")
Signed-off-by: Li Chen <me@linux.beauty>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Li Chen <me@linux.beauty>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ricardo Ribalda Delgado <ribalda@chromium.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5138c936c2 ]
commit c06c303832 ("ocfs2: fix xattr array entry __counted_by error")
doesn't handle all cases and the cleanup job for preserved xattr entries
still has bug:
- the 'last' pointer should be shifted by one unit after cleanup
an array entry.
- current code logic doesn't cleanup the first entry when xh_count is 1.
Note, commit c06c303832 is also a bug fix for 0fe9b66c65.
Link: https://lkml.kernel.org/r/20251210015725.8409-2-heming.zhao@suse.com
Fixes: 0fe9b66c65 ("ocfs2: Add preserve to reflink.")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 666183dcdd ]
When idtab allocation fails, net is not registered with rio_add_net() yet,
so kfree(net) is sufficient to release the memory. Set mport->net to NULL
to avoid dangling pointer.
Link: https://lkml.kernel.org/r/20260121013508.195836-1-lihaoxiang@isrc.iscas.ac.cn
Fixes: e6b585ca6e ("rapidio: move net allocation into core code")
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8d899d301 ]
When building the kernel using a version of LLVM between llvmorg-19-init
(the first commit of the LLVM 19 development cycle) and the change in
LLVM that actually added __typeof_unqual__ for all C modes [1], which
might happen during a bisect of LLVM, there is a build failure:
In file included from arch/x86/kernel/asm-offsets.c:9:
In file included from include/linux/crypto.h:15:
In file included from include/linux/completion.h:12:
In file included from include/linux/swait.h:7:
In file included from include/linux/spinlock.h:56:
In file included from include/linux/preempt.h:79:
arch/x86/include/asm/preempt.h:61:2: error: call to undeclared function '__typeof_unqual__'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
61 | raw_cpu_and_4(__preempt_count, ~PREEMPT_NEED_RESCHED);
| ^
arch/x86/include/asm/percpu.h:478:36: note: expanded from macro 'raw_cpu_and_4'
478 | #define raw_cpu_and_4(pcp, val) percpu_binary_op(4, , "and", (pcp), val)
| ^
arch/x86/include/asm/percpu.h:210:3: note: expanded from macro 'percpu_binary_op'
210 | TYPEOF_UNQUAL(_var) pto_tmp__; \
| ^
include/linux/compiler.h:248:29: note: expanded from macro 'TYPEOF_UNQUAL'
248 | # define TYPEOF_UNQUAL(exp) __typeof_unqual__(exp)
| ^
The current logic of CC_HAS_TYPEOF_UNQUAL just checks for a major
version of 19 but half of the 19 development cycle did not have support
for __typeof_unqual__.
Harden the logic of CC_HAS_TYPEOF_UNQUAL to avoid this error by only
using __typeof_unqual__ with a released version of LLVM 19, which is
greater than or equal to 19.1.0 with LLVM's versioning scheme that
matches GCC's [2].
Link: cc308f60d4 [1]
Link: 4532617ae4 [2]
Link: https://lkml.kernel.org/r/20260116-require-llvm-19-1-for-typeof_unqual-v1-1-3b9a4a4b212b@kernel.org
Fixes: ac053946f5 ("compiler.h: introduce TYPEOF_UNQUAL() macro")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94350fe6ca ]
This changes fixes following build error which is a miss from ef6e06b2ef
("highmem: fix kmap_to_page() for kmap_local_page() addresses").
mm/highmem.c:184:66: error: 'pteval' undeclared (first use in this
function); did you mean 'pte_val'?
184 | idx = arch_kmap_local_map_idx(i, pte_pfn(pteval));
In __kmap_to_page(), pteval is used but does not exist in the function.
(akpm: affects xtensa only)
Link: https://lkml.kernel.org/r/SJ0PR07MB86317E00EC0C59DA60935FDCD18DA@SJ0PR07MB8631.namprd07.prod.outlook.com
Fixes: ef6e06b2ef ("highmem: fix kmap_to_page() for kmap_local_page() addresses")
Signed-off-by: William Tambe <williamt@cadence.com>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 562357a631 ]
During testing, restart occasionally failed on Toradex modules.
The issue was traced to an interaction between the EC-based reset/poweroff
handler and the PSCI restart handler. While the embedded controller is
resetting or powering off the module, the PSCI code may still be invoked,
triggering an I2C transaction to the PMIC. This can leave the PMIC I2C
in a frozen state.
Add a delay after issuing the EC reset or power-off command to give the
controller time to complete the operation and avoid falling back to another
restart/poweroff provider.
Also print an error message if sending the command to the embedded controller
fails.
Fixes: 18672fe123 ("power: reset: add Toradex Embedded Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260130071208.1184239-1-ghidoliemanuele@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4af7d194d ]
Macronix serial NAND devices with continuous read support do not
clear the configuration register on soft reset and lack a hardware
reset pin. When continuous read is interrupted (e.g., during reboot),
the feature remains enabled at the device level.
With continuous read enabled, the OOB area becomes inaccessible and
all reads are instead directed to the main area. As a result, during
partition allocation as part of MTD device registration, the first two
bytes of the main area for the master block are read and indicate that
the block is bad. This process repeats for every subsequent block for
the partition.
All reads and writes that reference the BBT find no good blocks and
fail.
The only paths for recovery from this state are triggering the
continuous read feature by way of raw MTD reads or through a NAND
device power drain.
Disable continuous read explicitly during spinand probe to ensure
quiescent feature state.
Fixes: 631cfdd052 ("mtd: spi-nand: Add continuous read support")
Cc: stable@vger.kernel.org
Signed-off-by: David LaPorte <dalaport@amazon.com>
Reviewed-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b79b24f578 ]
The return value from itg3200_read_reg_s16() is stored in ret but
never checked. The function unconditionally returns IIO_VAL_INT,
ignoring potential I2C read failures. This causes garbage data to
be returned to userspace when the read fails, with no error reported.
Add proper error checking to propagate the failure to callers.
Fixes: 9dbf091da0 ("iio: gyro: Add itg3200")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33c1c6d8a2 ]
As kcalloc() may fail, check its return value to avoid a NULL pointer
dereference when passing it to of_property_read_u32_array().
Fixes: 790a1662d3 ("powerpc/smp: Parse ibm,thread-groups with multiple properties")
Cc: stable@vger.kernel.org
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250923133235.1862108-1-lgs201920130244@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd025c1e87 ]
Remove duplication by consolidating these here. This reduces the
posibility of a parent driver missing them.
While we're at it, fix a bug in vdpa_sim where a valid ASID can be
assigned to a group equal to ngroups, causing an out of bound write.
Cc: stable@vger.kernel.org
Fixes: bda324fd03 ("vdpasim: control virtqueue support")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260119143306.1818855-2-eperezma@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a537c0da16 ]
A perf build failure was reported by Thomas Voegtle on stable kernel
v6.6.120:
CC tests/sample-parsing.o
CC util/intel-pt-decoder/intel-pt-pkt-decoder.o
CC util/perf-regs-arch/perf_regs_csky.o
CC util/arm-spe-decoder/arm-spe-pkt-decoder.o
CC util/perf-regs-arch/perf_regs_loongarch.o
In file included from util/arm-spe-decoder/arm-spe-pkt-decoder.h:10,
from util/arm-spe-decoder/arm-spe-pkt-decoder.c:14:
/local/git/linux-stable-rc/tools/include/linux/bitfield.h: In function ‘le16_encode_bits’:
/local/git/linux-stable-rc/tools/include/linux/bitfield.h:166:31: error: implicit declaration of
function ‘cpu_to_le16’; did you mean ‘htole16’? [-Werror=implicit-function-declaration]
____MAKE_OP(le##size,u##size,cpu_to_le##size,le##size##_to_cpu) \
^~~~~~~~~
/local/git/linux-stable-rc/tools/include/linux/bitfield.h:149:9: note: in definition of macro
‘____MAKE_OP’
return to((v & field_mask(field)) * field_multiplier(field)); \
^~
/local/git/linux-stable-rc/tools/include/linux/bitfield.h:170:1: note: in expansion of macro
‘__MAKE_OP’
__MAKE_OP(16)
Fix this by including linux/kernel.h, which provides the required
definitions.
The issue was not found on the mainline due to the relevant C files have
included kernel.h. It'd be good to merge this change on mainline
as well for robustness.
Closes: https://lore.kernel.org/stable/3a44500b-d7c8-179f-61f6-e51cb50d3512@lio96.de/
Fixes: 64d86c03e1 ("perf arm-spe: Extend branch operations")
Reported-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Reported-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
To: Sasha Levin <sashal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f3b950492 ]
If a process wrote to POR_EL0 and then crashed before a context switch
happened, the coredump would contain an incorrect value for POR_EL0.
The value read in poe_get() would be a stale value left in thread.por_el0. Fix
this by reading the value from the system register, if the target thread is the
current thread.
This matches what gcs/fpsimd do.
Fixes: 1751981992 ("arm64/ptrace: add support for FEAT_POE")
Reported-by: David Spickett <david.spickett@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
