Commit graph

536,164 commits

Author SHA1 Message Date
Richard Fitzgerald
c4ac37193e Documentation: devicetree: arizona: Add bindings for WM8280
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:42 +00:00
Richard Fitzgerald
e5d4ef0d73 mfd: arizona: Add support for WM8280/WM8281
This adds support for the Wolfson Microelectronics WM8280 and WM8281
codecs.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
[Lee: Minor fixup to remove potentially uninitialised variable. ]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:07 +00:00
Christian Borntraeger
fb3d1c085c s390: let the compiler do page clearing
The hardware folks told me that for page clearing "when you exactly
know what to do, hand written xc+pfd is usally faster then mvcl for
page clearing, as it saves millicode overhead and parameter parsing
and checking" as long as you dont need the cache bypassing.
Turns out that gcc already does a proper xc,pfd loop.

A small test on z196 that does

buff = mmap(NULL, bufsize,PROT_EXEC|PROT_WRITE|PROT_READ,AP_PRIVATE| MAP_ANONYMOUS,0,0);
for ( i = 0; i < bufsize; i+= 256)
    buff[i] = 0x5;

gets 20% faster (touches every cache line of a page)

and

buff = mmap(NULL, bufsize,PROT_EXEC|PROT_WRITE|PROT_READ,AP_PRIVATE| MAP_ANONYMOUS,0,0);
for ( i = 0; i < bufsize; i+= 4096)
    buff[i] = 0x5;

is within noise ratio (touches one cache line of a page).

As the clear_page is usually called for first memory accesses
we can assume that at least one cache line is used afterwards,
so this change should be always better.
Another benchmark, a make -j 40 of my testsuite in tmpfs with
hot caches on a 32cpu system:

 -- unpatched --       --  patched  --
real     0m1.017s     real     0m0.994s   (~2% faster, but in noise)
user     0m5.339s     user     0m5.016s   (~6% faster)
sys      0m0.691s     sys      0m0.632s   (~8% faster)

Let use the same define to memset as the asm-generic variant

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26 09:24:49 +01:00
Sebastian Ott
f0483044c1 s390/pci: fix possible information leak in mmio syscall
Make sure that even in error situations we do not use copy_to_user
on uninitialized kernel memory.

Cc: stable@vger.kernel.org # 3.19+
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26 09:24:48 +01:00
Ameen Ali
3a9f9183bd s390/dcss: array index 'i' is used before limits check.
Avoid out-of-bounds-read by checking count before indexing.

Signed-off-by : Ameen Ali <Ameenali023@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26 09:24:48 +01:00
Sebastian Ott
a13ccb04af s390/scm_block: fix off by one during cluster reservation
We increase the msb_count after we're finished building the request.
That way we can always access the current request via
scmrq->request[msb_count] . But once the request is started we need
to make sure that the array index stays below msb_count.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26 09:24:47 +01:00
Heiko Carstens
72dace969d s390/jump label: improve and fix sanity check
Fix the output of the jump label sanity check and also print the
code pattern that is supposed to be written to the jump label.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26 09:24:46 +01:00
Heiko Carstens
6f367769e3 s390/jump label: add missing jump_label_apply_nops() call
When modules are loaded we want to transform the compile time generated
nops into runtime generated nops. Otherwise the jump label sanity check
will detect invalid code when trying to patch code.

Fixes this crash:

Jump label code mismatch at __rds_conn_create+0x3c/0x720
Found:    c0 04 00 00 00 01
Expected: c0 04 00 00 00 00
Kernel panic - not syncing: Corrupted kernel text
CPU: 0 PID: 10 Comm: migration/0 Not tainted 3.19.0-01935-g006610f #14
Call Trace:
<0000000000113260> show_trace+0xf8/0x158)
<000000000011332a> show_stack+0x6a/0xe8
<000000000069fd64> dump_stack+0x7c/0xd8
<0000000000698d54> panic+0xe4/0x288
<00000000006984c6> jump_label_bug.isra.2+0xbe/0xc001
<000000000011200c> __jump_label_transform+0x94/0xc8

Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26 09:24:45 +01:00
Tomi Valkeinen
a38bb793ea OMAPDSS: fix regression with display sysfs files
omapdss's sysfs directories for displays used to have 'name' file,
giving the name for the display. This file was later renamed to
'display_name' to avoid conflicts with i2c sysfs 'name' file. Looks like
at least xserver-xorg-video-omap3 requires the 'name' file to be
present.

To fix the regression, this patch creates new kobjects for each display,
allowing us to create sysfs directories for the displays. This way we
have the whole directory for omapdss, and there will be no sysfs file
clashes with the underlying display device's sysfs files.

We can thus add the 'name' sysfs file back.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: NeilBrown <neilb@suse.de>
2015-02-26 10:23:15 +02:00
Sudip Mukherjee
d746b40c64 video: fbdev: fix possible null dereference
we were dereferencing edid first and the NULL check was after
accessing that. now we are using edid only if we know that
it is not NULL.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 10:23:15 +02:00
Kiran Padwal
11f09e53af video: ARM CLCD: Add missing error check for devm_kzalloc
This patch add a missing check on the return value of devm_kzalloc,
which would cause a NULL pointer dereference in a OOM situation.

Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 10:23:15 +02:00
Kishon Vijay Abraham I
0717103e65 ARM: DRA7: hwmod_data: Fix hwmod data for pcie
Fixed hwmod data for pcie by having the correct module mode offset.
Previously this module mode offset was part of pcie PHY which was wrong.
Now this module mode offset was moved to pcie hwmod and removed the hwmod data
for pcie phy. While at that renamed pcie_hwmod to pciess_hwmod in order
to match with the name given in TRM.

This helps to get rid of the following warning
"omap_hwmod: pcie1: _wait_target_disable failed"

[Grygorii.Strashko@linaro.org: Found the issue that actually caused
 "omap_hwmod: pcie1: _wait_target_disable failed"]
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2015-02-26 00:02:28 -07:00
Peter Ujfalusi
6931795238 ARM: omap2+: omap_hwmod: Set unique lock_class_key per hwmod
Add struct lock_class_key to omap_hwmod struct and use it to set unique
lockdep class per hwmod.
This will ensure that lockdep will know that each omap_hwmod->_lock should
be treated as separate class and will not give false warning about deadlock
or other issues due to nested use of hwmods.
DRA7x's ATL hwmod is one example for this since McASP can select ATL clock
as functional clock, which will trigger nested oh->_lock usage. This will
trigger false warning from lockdep validator as it is dealing with classes
and for it all hwmod clocks are the same class.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2015-02-26 00:00:51 -07:00
Stefan Agner
af321d2e32 ARM: vf610: use SMP_ON_UP for Vybrid SoC
The Vybrid SoC has only one Cortex-A5 core and hence should select
the SMP_ON_UP configuration on a SMP kernel.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-02-26 13:55:55 +08:00
Thomas Niederprüm
8af4baa708 ASoC: OMAP: mcbsp: Fix CLKX and CLKR pinmux when used as inputs
This patch fixes faulty behaviour in a setup where the input clock for the
SRG is fed through the CLKR/CLKX pin but the McBSP is configured to be
master (SND_SOC_DAIFMT_CBS_CFS). In that case of course CLKR/CLKX must
not be configured as output pin. Otherwise the input clock is messed up
horribly.

This patch makes it possible to use the CLKR/CLKX pin rather than CLKS to
inject a reference clock in setups where McBSP is master and not both
rx and tx are used. However for this to work it has to be ensured that
set_dai_sysclk() is called after set_dai_fmt().

This was tested on a beagleboard-xm using McBSP1 to drive a i2s DAC through
the tx lines (CLKX,FSX,DX). Using this patch the CLKR pin is used to inject
an external reference clock.

Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-26 11:48:49 +09:00
Torsten Fleischer
76e1d14b31 spi: atmel: Fix interrupt setup for PDC transfers
Additionally to the current DMA transfer the PDC allows to set up a next DMA
transfer. This is useful for larger SPI transfers.

The driver currently waits for ENDRX as end of the transfer. But ENDRX is set
when the current DMA transfer is done (RCR = 0), i.e. it doesn't include the
next DMA transfer.
Thus a subsequent SPI transfer could be started although there is currently a
transfer in progress. This can cause invalid accesses to the SPI slave devices
and to SPI transfer errors.

This issue has been observed on a hardware with a M25P128 SPI NOR flash.

So instead of ENDRX we should wait for RXBUFF. This flag is set if there is
no more DMA transfer in progress (RCR = RNCR = 0).

Signed-off-by: Torsten Fleischer <torfl6749@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-02-26 11:34:23 +09:00
Kenneth Westfield
92b2ad2c9e ASoC: max98357a: Use standard DAI names
Use the standard naming convention for the codec DAI.

Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-26 11:23:46 +09:00
Andy Shevchenko
9d239d353c spi: dw: revisit FIFO size detection again
The commit d297933cc7 (spi: dw: Fix detecting FIFO depth) tries to fix the
logic of the FIFO detection based on the description on the comments. However,
there is a slight difference between numbers in TX Level and TX FIFO size.

So, by specification the FIFO size would be in a range 2-256 bytes. From TX
Level prospective it means we can set threshold in the range 0-(FIFO size - 1)
bytes. Hence there are currently two issues:
  a) FIFO size 2 bytes is actually skipped since TX Level is 1 bit and could be
     either 0 or 1 byte;
  b) FIFO size is incorrectly decreased by 1 which already done by meaning of
     TX Level register.

This patch fixes it eventually right.

Fixes: d297933cc7 (spi: dw: Fix detecting FIFO depth)
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-02-26 11:09:51 +09:00
Oder Chiou
70068776c4 ASoC: rt5677: Correct the routing paths of that after IF1/2 DACx Mux
The patch corrects the routing paths of that after IF1/2 DACx Mux

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-26 11:06:51 +09:00
Vinod Koul
5bb400ce4a ASoC: Intel: wrap runtime_pm usage count under CONFIG_PM
The struct dev_pm_ops defines usage_count only when CONFIG_PM is defined. So
we should use this variable only in cases where this falg is true.
So we define a local variable and read the value under this flag. In non PM
cases, we set this to 1.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-26 10:59:37 +09:00
Stefan Sauer
71daf89476 Input: mma8450 - add parent device
Add the parent device so that udev can show the full hierarchy. This avoids
the device showing up under /devices/virtual/input instead of the i2c bus
it is actually attached to.

Signed-off-by: Stefan Sauer <ensonic@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-25 17:13:51 -08:00
Laurent Pinchart
fd25cdd15b ARM: shmobile: lager: Add DU HDMI output support
Add DT nodes for the ADV7511 HDMI encoder and its HDMI output connector.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-26 10:05:49 +09:00
Lai Jiangshan
3f47da0f32 rcu_tree: Avoid touching rnp->completed when a new GP is started
In rcu_gp_init(), rnp->completed equals to rsp->completed in THEORY,
we don't need to touch it normally.  If something goes wrong,
it will complain and fixup rnp->completed and avoid oops.
This commit thus avoids the normal needless store to rnp->completed.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-02-25 17:03:05 -08:00
Paul E. McKenney
ee376dbdf2 rcu: Consolidate rcu_synchronize and wakeme_after_rcu()
There are currently duplicate identical definitions of the
rcu_synchronize() structure and the wakeme_after_rcu() function.
Thie commit therefore consolidates them.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-02-25 17:03:03 -08:00
NeilBrown
5d8a4219a0 power_supply core: support use of devres to register/unregister a power supply.
Using devm_power_supply_register allows the unregister to happen
automatically on error or final put.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-26 01:50:22 +01:00
Dave Airlie
329414c4e7 Merge tag 'topic/drm-misc-2015-02-25' of git://anongit.freedesktop.org/drm-intel into drm-next
misc atomic and dp macros

* tag 'topic/drm-misc-2015-02-25' of git://anongit.freedesktop.org/drm-intel:
  drm: Adding edp1.4 specific dpcd macros
  drm/atomic-helpers: make mode_set hooks optional
  drm/atomic-helper: Rename commmit_post/pre_planes
  drm/atomic: Rename drm_atomic_helper_commit_pre_planes() state argument
  drm: If available use atomic state in getcrtc ioctl
  drm: Add DRM_DEBUG_ATOMIC
  drm/atomic-helpers: Fix documentation typos and wrong copy&paste
  drm: Fix the CRTC_STEREO_DOUBLE_ONLY define to include stero modes
  drm: Fix drm_crtc_vblank_get() documentation
2015-02-26 10:32:55 +10:00
Brian Norris
1d4a9c17d4 PM / sleep: add configurable delay for pm_test
When CONFIG_PM_DEBUG=y, we provide a sysfs file (/sys/power/pm_test) for
selecting one of a few suspend test modes, where rather than entering a
full suspend state, the kernel will perform some subset of suspend
steps, wait 5 seconds, and then resume back to normal operation.

This mode is useful for (among other things) observing the state of the
system just before entering a sleep mode, for debugging or analysis
purposes. However, a constant 5 second wait is not sufficient for some
sorts of analysis; for example, on an SoC, one might want to use
external tools to probe the power states of various on-chip controllers
or clocks.

This patch turns this 5 second delay into a configurable module
parameter, so users can determine how long to wait in this
pseudo-suspend state before resuming the system.

Example (wait 30 seconds);

  # echo 30 > /sys/module/suspend/parameters/pm_test_delay
  # echo core > /sys/power/pm_test
  # time echo mem  > /sys/power/state
  ...
  [   17.583625] suspend debug: Waiting for 30 second(s).
  ...
  real	0m30.381s
  user	0m0.017s
  sys	0m0.080s

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Kevin Cernekee <cernekee@chromium.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-26 01:21:26 +01:00
Mark Rutland
737eb0301f genirq / PM: better describe IRQF_NO_SUSPEND semantics
The IRQF_NO_SUSPEND flag is intended to be used for interrupts required
to be enabled during the suspend-resume cycle. This mostly consists of
IPIs and timer interrupts, potentially including chained irqchip
interrupts if these are necessary to handle timers or IPIs. If an
interrupt does not fall into one of the aforementioned categories,
requesting it with IRQF_NO_SUSPEND is likely incorrect.

Using IRQF_NO_SUSPEND does not guarantee that the interrupt can wake the
system from a suspended state. For an interrupt to be able to trigger a
wakeup, it may be necessary to program various components of the system.
In these cases it is necessary to use {enable,disabled}_irq_wake.

Unfortunately, several drivers assume that IRQF_NO_SUSPEND ensures that
an IRQ can wake up the system, and the documentation can be read
ambiguously w.r.t. this property.

This patch updates the documentation regarding IRQF_NO_SUSPEND to make
this caveat explicit, hopefully making future misuse rarer. Cleanup of
existing misuse will occur as part of later patch series.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-26 01:17:53 +01:00
Matt Roper
07878248a8 drm/i915: Ensure crtc_state backpointer is always initialized
As we transition to full atomic modesetting, we want to be able to pass
intel_crtc_state around in various places that we pass intel_crtc
directly today.  Ensure that the ->crtc backpointer is properly
initialized in case we need to get back to the associated CRTC.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26 00:14:17 +01:00
Matt Roper
83d657388a drm/i915: Use enabled value from crtc_state rather than crtc (v2)
As vendors transition their drivers from legacy to atomic there's some
duplication of data between drm_crtc and drm_crtc_state (since
unconverted drivers likely won't have a state structure).

i915 is partially converted and does have a crtc->state structure, but
still uses direct crtc fields internally in many places, which causes
the two sets of data to get out of sync.  As of commit

        commit 31c946e85c
        Author: Daniel Vetter <daniel.vetter@ffwll.ch>
        Date:   Sun Feb 22 12:24:17 2015 +0100

            drm: If available use atomic state in getcrtc ioctl

            This way drivers fully converted to atomic don't need to update these
            legacy state variables in their modeset code any more.

            Reviewed-by: Rob Clark <robdclark@gmail.com>
            Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

the DRM core starts assuming that the presence of a ->state structure
implies that it should make use of the values stored there which, on
i915, leads to the core code using stale values for CRTC 'enabled'
status.

Let's switch over to using the state value of 'enable' internally rather
than using the drm_crtc field.  This ensures that our driver internals
are working from the same data that the DRM core is, avoiding
mismatches.

This patch was generated with Coccinelle using the following semantic
patch:

        <smpl>
        @@
        struct drm_crtc C;
        struct drm_crtc *CP;
        @@
        (
        - C.enabled
        + C.state->enable
        |
        - CP->enabled
        + CP->state->enable
        )

        // For assignments, we still update the legacy value as well as the state value
        // so add an extra assignment statement for that.
        @@
        struct drm_crtc C;
        struct drm_crtc *CP;
        expression E;
        @@
        (
          C.state->enable = E;
        + C.enabled = E;
        |
          CP->state->enable = E;
        + CP->enabled = E;
        )
        </smpl>

The crtc->mode and crtc->hwmode fields should probably be transitioned
over as well eventually, but we seem to do an okay job of keeping those
up-to-date already so I want to minimize the changes that will clash
with Ander's in-progress atomic work.

v2: Don't remove the assignments to the legacy value when we assign to
    the state value.  A second cocci stanza takes care of adding the
    legacy assignment back where appropriate.  (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26 00:14:02 +01:00
David S. Miller
009f33ed6f Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-02-24

This series contains updates to i40e and i40evf only, which bumps their
versions to i40e 1.2.9 and i40evf 1.2.3.

Paul fixes i40e_debug_aq() for big endian machines by adding the
appropriate LExx_TO_CPU wrappers.

Catherine adds a requested speed variable to the link_status to store the
last speeds we requested from the firmware and use the advertised speed
settings in get_settings in ethtool now that we have it.  Due to the
new code addition, she also refactors get_settings to improve readability
and to accommodate some of the longer lines of code by adding two
functions i40e_get_settings_link_up() and i40e_get_settings_link_down().

Carolyn adds a struct to the VSI struct to keep track of RXNFC settings
done via ethtool.  Adds more information to the interrupt vector
names, specifically to the VF misc vector name so that we can distinguish
between all the interrupts.

Ashish enables the i40evf driver to enable debug prints via ethtool.

Mitch updates i40e to enable packet split only when IOMMU is in use,
since it shows a distinct advantage over the single-buffer path
because it minimizes DMA mapping and unmapping.  Also adds the receive
routine in use to the features log message to be able to print the
receive packet split status.

Greg adds the ability to get, set and commit permanently the NPAR
partition BW configuration through configfs.  Enables an application
to query the i40e driver's private flags to get the status of NPAR
enablement via ethtool.

Neerav adds support for bridge offload ndo_ops getlink and setlink
to enable bridge hardware mode as per the mode set via IFLA_BRIDGE_MODE.
The support is only enabled in the case of a PF VSI and not available for
any other VSI type.

Kevin fixes i40e by ensuring the BUF and FLAG_RD flags are set for
indirect admin queue command.

Vasu updates the driver to setup FCoE netdev device type as "fcoe", so that
it shows up in sysfs as FCoE device.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25 18:13:07 -05:00
Guenter Roeck
d79d210736 net: dsa: Introduce dsa_is_port_initialized
To avoid race conditions when using the ds->ports[] array,
we need to check if the accessed port has been initialized.
Introduce and use helper function dsa_is_port_initialized
for that purpose and use it where needed.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25 17:57:48 -05:00
David S. Miller
bb66be1c54 Merge branch 'sf2_hwbridge'
Florian Fainelli says:

====================
net: dsa: integration with SWITCHDEV for HW bridging

This patch set provides the DSA and SWITCHDEV integration bits together and
modifies the bcm_sf2 driver accordingly such that it works properly with HW
bridging.

Changes in v3:

- add back the null pointer check in dsa_slave_br_port_mask from Guenter
- slightly rework patch 1 commit message not to mention the function name
  we add in patch 2

Changes in v2:

- avoid a race condition in how DSA network devices are created, patch from
  Guenter Roeck
- provide a consistent and work STP state once a port leaves the bridge
- retain a bridge device pointer to properly flag port/bridge membership
- properly flush the ARL (Address Resolution Logic) in bcm_sf2.c
- properly retain port membership when individually bringing devices up/down
  while they are members of a bridge

We discussed on the mailing-list the possibility of standardizing a "fdb_flush"
operation for DSA switch drivers, looking at the Marvell and Broadcom switches,
I am not convinced this is practical or diserable as the terminologies vary
here, but there is nothing preventing us from doing it later.

Many thanks to Guenter and Andrew for both testing and providing feedback.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25 17:04:15 -05:00
Florian Fainelli
12f460f234 net: dsa: bcm_sf2: add HW bridging support
Implement the bridge join, leave and set_stp callbacks by making that
we do the following:

- when a port joins the bridge, all existing ports in the bridge get
  their VLAN control register updated with that joining port
- the joining port is including all existing bridge ports in its own
  VLAN control register

The leave operation is fairly similar, special care must be taken to
make sure that port leaving the bridging is not removing itself from its
own VLAN control register.

Since the various BR_* states apply directly to our HW semantics, we
just need to translate these constants into their corresponding HW
settings, and voila!

We make sure to trigger a fast-ageing process for ports that are
joining/leaving the bridge and transition from incompatible states, this
is equivalent to triggering an ARL flush for that port.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25 17:03:38 -05:00
Florian Fainelli
b73adef677 net: dsa: integrate with SWITCHDEV for HW bridging
In order to support bridging offloads in DSA switch drivers, select
NET_SWITCHDEV to get access to the port_stp_update and parent_get_id
NDOs that we are required to implement.

To facilitate the integratation at the DSA driver level, we implement 3
types of operations:

- port_join_bridge
- port_leave_bridge
- port_stp_update

DSA will resolve which switch ports that are currently bridge port
members as some Switch hardware/drivers need to know about that to limit
the register programming to just the relevant registers (especially for
slow MDIO buses).

We also take care of setting the correct STP state when slave network
devices are brought up/down while being bridge members.

Finally, when a port is leaving the bridge, we make sure we set in
BR_STATE_FORWARDING state, otherwise the bridge layer would leave it
disabled as a result of having left the bridge.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25 17:03:38 -05:00
Guenter Roeck
d87d6f44d7 net: dsa: Ensure that port array elements are initialized before being used
A network device notifier can be called for one or more of the created
slave devices before all slave devices have been registered. This can
result in a mismatch between ds->phys_port_mask and the registered devices
by the time the call is made, and it can result in a slave device being
added to a bridge before its entry in ds->ports[] has been initialized.

Rework the initialization code to initialize entries in ds->ports[] in
dsa_slave_create. With this change, dsa_slave_create no longer needs
to return slave_dev but can return an error code instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25 17:03:38 -05:00
Andy Gospodarek
31639b94ca MAINTAINERS: update my email address
I have been signing off on patches with this address so I'll change it.

Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25 17:01:40 -05:00
Tom Lendacky
74ad752442 amd-xgbe-phy: PHY KX/KR mode differences
The PHY requires different settings for the Decision Feedback Analyzer
(DFE) when running in KX mode vs. KR mode. Update the code to change
these settings when changing modes in order to provide a more stable
link.

Additionally, adjust the 10GbE PQ skew default setting to a more sane
value.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25 16:57:42 -05:00
John Harrison
98e1bd4ae6 drm/i915: Cache ringbuf pointer in request structure
In execlist mode, the ringbuf is a function of the ring and context whereas in
legacy mode, it is derived from the ring alone. Thus the calculation required to
determine the ringbuf pointer from the ring (and context) also needs to test
execlist mode or not. This is messy.

Further, the request structure holds a pointer to both the ring and the context
for which it was created. Thus, given a request, it is possible to derive the
ringbuf in either legacy or execlist mode. Hence it is necessary to pass just
the request in to all the low level functions rather than some combination of
request, ring, context and ringbuf. However, rather than recalculating it each
time, it is much simpler to just cache the ringbuf pointer in the request
structure itself.

Caching the pointer means the calculation is done once at request creation time
and all further code and simply read it directly from the request structure.

OTC-Jira: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
[danvet: Drop contentless comment in lrc alloc request entirely. And
spelling fix in the commit message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 22:53:10 +01:00
Pavel Machek
881f985a25 bq2415x_charger, bq27x00_battery.c: comment cleanups
Cleanup comments  for bq2415x_charger, bq27x00_battery.c.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 22:52:44 +01:00
John Harrison
5e4be7bda1 drm/i915: Add missing trace point to LRC execbuff code path
There is a trace point in the legacy execbuffer execution path that is missing
from the execlist path. Trace points are extremely useful for debugging and are
used by various automated validation tests. Hence, this patch adds the missing
trace point back in.

OTC-Jira: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 22:48:21 +01:00
Nicholas Mc Guire
298631e1ec ab8500_fg: use jiffies_to_msecs for jiffies conversion
Converting jiffies to milliseconds by "val * 1000 / HZ" is technically
OK but jiffies_to_msecs(val) is the cleaner solution and handles all
corner cases correctly. This is a minor API consolidation only and
should make things more readable.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 22:47:12 +01:00
Nicholas Mc Guire
5ae6e2a8f8 ab8500_fg: match return type of wait_for_completion_timeout
return type of wait_for_completion_timeout is unsigned long not int. as
timeout is used for wait_for_completion_timeout exclusively here its
type is simply changed to unsigned long.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 22:47:12 +01:00
John Harrison
8e004efc16 drm/i915: Rename 'flags' to 'dispatch_flags' for better code reading
There is a flags word that is passed through the execbuffer code path all the
way from initial decoding of the user parameters down to the very final dispatch
buffer call. It is simply called 'flags'. Unfortuantely, there are many other
flags words floating around in the same blocks of code. Even more once the GPU
scheduler arrives.

This patch makes it more obvious exactly which flags word is which by renaming
'flags' to 'dispatch_flags'. Note that the bit definitions for this flags word
already have an 'I915_DISPATCH_' prefix on them and so are not quite so
ambiguous.

OTC-Jira: VIZ-1587
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
[danvet: Resolve conflict with Chris' rework of the bb parsing.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 22:43:29 +01:00
Krzysztof Kozlowski
c75cfa9e27 power_supply: ab8500_fg: Simplify creation and removal of sysfs entries
Simplify a little ab8500_fg_sysfs_psy_create_attrs () and
ab8500_fg_sysfs_psy_remove_attrs() functions because they received
pointer to power supply device which was then converted into power
supply instance. Then it was converted into struct ab8500_fg. The path
looked like:
	ab8500_fg->psy.dev -> psy -> ab8500_fg

Instead just pass pointer to struct ab8500_fg directly so all
conversions won't be necessary.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 22:26:32 +01:00
Sebastian Reichel
e7143fdb79 Merge branch 'fixes' into next 2015-02-25 22:18:48 +01:00
Krzysztof Kozlowski
a7117f81e8 power_supply: lp8788-charger: Fix leaked power supply on probe fail
Driver forgot to unregister charger power supply if registering of
battery supply failed in probe(). In such case the memory associated
with power supply leaked.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 98a2766493 ("power_supply: Add new lp8788 charger driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 22:18:18 +01:00
Krzysztof Kozlowski
a2c1d53185 power_supply: ipaq_micro_battery: Check return values in probe
The return values of create_singlethread_workqueue() and
power_supply_register() calls were not checked and even on error probe()
function returned 0.

1. If allocation of workqueue failed (returning NULL) then further
   accesses could lead to NULL pointer dereference. The
   queue_delayed_work() expects workqueue to be non-NULL.

2. If registration of power supply failed then during unbind the driver
   tried to unregister power supply which was not actually registered.
   This could lead to memory corruption because
   power_supply_unregister() unconditionally cleans up given power
   supply.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 00a588f9d2 ("power: add driver for battery reading on iPaq h3xxx")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 22:18:18 +01:00
Krzysztof Kozlowski
f852ec461e power_supply: ipaq_micro_battery: Fix leaking workqueue
Driver allocates singlethread workqueue in probe but it is not destroyed
during removal.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 00a588f9d2 ("power: add driver for battery reading on iPaq h3xxx")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 22:18:18 +01:00
Krzysztof Kozlowski
68c3ed6fa7 power_supply: twl4030_madc: Check return value of power_supply_register
The return value of power_supply_register() call was not checked and
even on error probe() function returned 0. If registering failed then
during unbind the driver tried to unregister power supply which was not
actually registered.

This could lead to memory corruption because power_supply_unregister()
unconditionally cleans up given power supply.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: da0a00ebc2 ("power: Add twl4030_madc battery driver.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 22:18:18 +01:00