Commit graph

536,164 commits

Author SHA1 Message Date
Alex Deucher
3473f542ab drm/radeon: only enable DP audio if the monitor supports it
We were enabling DP secondary streams even if the monitor
didn't support them.  Fixes display problems on some DP
monitors.

Tested-by: Jim Boz <jim876@xs4all.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25 16:06:10 -05:00
Alex Deucher
94a47c49fe drm/radeon: fix atom aux payload size check for writes (v2)
The atom aux param interface only supports 4 bits for
the total write transfer size (header + payload).  This
limits us to 12 bytes of payload rather than 16.  Add a
check for this. Reads are not affected.

v2: switch to WARN_ON_ONCE

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25 16:06:10 -05:00
Alex Deucher
dbfb00c3e7 drm/radeon: fix 1 RB harvest config setup for TN/RL
The logic was reversed from what the hw actually exposed.
Fixes graphics corruption in certain harvest configurations.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2015-02-25 16:06:09 -05:00
Christian König
acc1522a54 drm/radeon: enable SRBM timeout interrupt on EG/NI
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25 16:06:08 -05:00
Christian König
18ad01effe drm/radeon: enable SRBM timeout interrupt on SI
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25 16:06:08 -05:00
Leo Liu
dc12a3ec71 drm/radeon: enable SRBM timeout interrupt on CIK v2
v2: disable it on suspend

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25 16:06:07 -05:00
Alex Deucher
e1b4e722f7 drm/radeon: dump full IB if we hit a packet error
Dump the whole IB if we run into an invalid packet.
This makes things much easier to debug.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=89148

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25 16:06:06 -05:00
Alex Deucher
951caa6acf drm/radeon: disable mclk switching with 120hz+ monitors
These tend to be problematic even if the vblank period is
long enough.  This needs more investigation across a wider
range of displays.  Disable for now.

bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=87796
https://bugs.freedesktop.org/show_bug.cgi?id=89198

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2015-02-25 16:06:06 -05:00
Alex Deucher
3d2d98ee1a drm/radeon: use drm_mode_vrefresh() rather than mode->vrefresh
Just in case it hasn't been calculated for the mode.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2015-02-25 16:06:05 -05:00
Nathan-J. Hirschauer
7a26f9ad1b drm/radeon: enable native backlight control on old macs
Commit b7bc596ebb ("drm/radeon: disable native
backlight control on pre-r6xx asics (v2)") accidently
broke backlight control on old mac laptops that use the
on-GPU backlight controller.

Signed-off-by: Nathan-J. Hirschauer <nathanhi@deepserve.info>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2015-02-25 16:05:53 -05:00
Krzysztof Kozlowski
bc352686f6 power_supply: max17042: Use regmap_update_bits instead read and write
Consolidate regmap_read() and regmap_write() into one
regmap_update_bits() call. This is more readable and safer because
regmap's mutex will prevent any concurrent access to modified registers
(the concurrent access could happen through max17042_init_chip() in
scheduled work).

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 21:45:46 +01:00
Krzysztof Kozlowski
52fa74ee69 power_supply: max17040: Use system efficient workqueues
The scheduled work in max17040_battery driver reads device parameters
and stores them in memory. Any CPU could do that so use system efficient
workqueues to limit unnecessary CPU wake ups.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 21:45:46 +01:00
Krzysztof Kozlowski
dd18a66346 power_supply: max14577: Properly handle error conditions
Re-work and fix handling of errors when retrieving power supply
properties:

1. Return errno values directly from get_property() instead of
   storing 'unknown' as intval for given property.

2. Handle regmap_read() errors and return errno code. Previously the
   regmap_read() return code was ignored so an uninitialized value from
   the stack could be used for calculating the property.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 21:45:46 +01:00
Krzysztof Kozlowski
7524741f83 power_supply: max14577: Don't store charging and battery states for later
Remove caching of charging and battery states in driver's state
container because the cached value was not used later.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 21:45:46 +01:00
Krzysztof Kozlowski
1ed522b390 power_supply: max77693: Properly handle error conditions
Re-work and fix handling of errors when retrieving power supply
properties:

1. Return errno values directly from get_property() instead of storing
   'unknown' as intval for given property.

2. Handle regmap_read() errors when getting 'online' and 'present'
   proprties and return errno code. Previously the regmap_read() return
   code was ignored so an uninitialized value from the stack could be
   used for calculating the property.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 21:45:46 +01:00
David Ahern
4861f87cd3 perf tools: Make sparc64 arch point to sparc
The recent build changes cause perf to not compile for sparc64 since the
arch/sparc64/Build file does not exist:

/home/dahern/kernels/linux.git/tools/build/Makefile.build:40: arch/sparc64/Build: No such file or directory

Fix by converting the sparc64 RAW_ARCH to sparc ARCH -- similar to what
is done for x86_64.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1424306222-96843-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25 17:39:17 -03:00
David Ahern
e370a3d576 perf symbols: Define EM_AARCH64 for older OSes
4886f2ca19 added an arm-64 check, but the EM_AARCH64 macro is not
defined in older releases (e.g., RHEL6). Define if it is not defined.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Link: http://lkml.kernel.org/r/1424306017-96797-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25 17:39:17 -03:00
Geert Uytterhoeven
213feb51e5 power: Use subdir-ccflags-* to inherit debug flag
Use subdir-ccflags-* instead of ccflags-* to inherit the debug
settings from Kconfig when traversing subdirectories.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 21:38:22 +01:00
David Ahern
a73b6c199a perf top: Fix SIGBUS on sparc64
perf-top is terminating due to SIGBUS on sparc64. git bisect points to:

    commit 8239698603
    Author: Arnaldo Carvalho de Melo <acme@redhat.com>
    Date:   Mon Sep 8 13:26:35 2014 -0300

        perf evlist: Refcount mmaps

        We need to know how many fds are using a perf mmap via
        PERF_EVENT_IOC_SET_OUTPUT, so that we can know when to ditch an mmap,
        refcount it.

This commit added 'int refcnt' to struct perf_mmap and the addition makes the
event_copy element no longer 8-byte aligned.

Fix by adding __attribute__((aligned(8))) to the event_copy struct
member.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1424304198-92028-1-git-send-email-david.ahern@oracle.com
[ Switched from 'int pad;' to using __attribute__, David tested/acked that ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25 17:37:44 -03:00
NeilBrown
5cd0c76d69 bq27x00_battery: register as non-wakeup power supply.
power_supply status changes for the bq27x00 are only
noticed via polling, not via interrupts.  So they are never
the source of events which should reliably wake the system
from suspend.
So it is appropriate to register as a no_ws power source,
just like the ACPI battery.

This removes some debugging messages which occasionally
confusingly identify bq27x00 as a wakeup source.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 21:36:35 +01:00
Krzysztof Kozlowski
65ce1c9549 power_supply: rt5033: Constify struct regmap_config
The regmap_config struct may be const because it is not modified by the
driver and regmap_init() accepts pointer to const.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 21:34:09 +01:00
Adam Thomson
7be72c2c51 MAINTAINERS: Include DA9150 files in Dialog Semiconductor support list.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 21:18:14 +01:00
Adam Thomson
1da9790cbd power: da9150: Add DT binding documentation for charger
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 21:18:14 +01:00
Adam Thomson
c1a281e34d power: Add support for DA9150 Charger
This patch adds support for DA9150 Charger & Fuel-Gauge IC Charger.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 21:18:14 +01:00
Sebastian Reichel
867fe7c31d Merge branch 'da9150-charger-fuelgauge' into next 2015-02-25 21:17:24 +01:00
Mike Looijmans
cc6405667c power: ltc2941-battery-gauge: Fix typo in conversion formula (58 instead of 85)
The driver reported 30% less than actually measured. This turned out to
be caused by a simple typo in the formula to calculate the LSB quantity.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 21:15:59 +01:00
kbuild test robot
a456fe3d27 clk: qcom: fix platform_no_drv_owner.cocci warnings
drivers/clk/qcom/lcc-msm8960.c:577:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-25 12:14:35 -08:00
kbuild test robot
3b34109a4d clk: qcom: fix platform_no_drv_owner.cocci warnings
drivers/clk/qcom/lcc-ipq806x.c:465:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

CC: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-25 12:14:35 -08:00
Stephen Boyd
4be8fc0470 clk: qcom: Add PLL4 vote clock
This clock is needed for most audio clock frequencies. Add it.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-25 12:08:39 -08:00
Stephen Boyd
84b919fdb8 clk: qcom: lcc-msm8960: Fix PLL rate detection
regmap_read() returns 0 on success, not the value of the register
that is read. Fix it so we properly detect the frequency plan.

Fixes: b82875ee07 "clk: qcom: Add MSM8960/APQ8064 LPASS clock
controller (LCC) driver"
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-25 12:08:39 -08:00
Stephen Boyd
7dd47b8ef5 clk: qcom: Fix slimbus n and m val offsets
These shifts were copy/pasted from the pcm which is a different
size RCG. Use the correct offsets so that slimbus rates are
correct.

Fixes: b82875ee07 "clk: qcom: Add MSM8960/APQ8064 LPASS clock controller (LCC) driver"
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-25 12:08:38 -08:00
Tony Lindgren
03208cc69f clk: ti: Fix FAPLL parent enable bit handling
Commit 163152cbbe ("clk: ti: Add support for FAPLL on dm816x")
added basic support for the FAPLL on dm818x, but has a bug for the
parent PLL enable bit. The FAPLL_MAIN_PLLEN is defined as BIT(3)
but the code is doing a shift on it.

This means the parent PLL won't get disabled even if all it's child
synthesizers are disabled.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-25 12:06:29 -08:00
Adam Thomson
adcf30bf83 iio: da9150: Add DT binding documentation for GPADC
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 21:05:26 +01:00
Adam Thomson
ed5f07b3d3 iio: Add support for DA9150 GPADC
This patch adds support for DA9150 Charger & Fuel-Gauge IC GPADC.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 21:05:26 +01:00
Adrian Hunter
48536c9195 perf tools: Fix probing for PERF_FLAG_FD_CLOEXEC flag
Commit f6edb53c49 converted the probe to
a CPU wide event first (pid == -1). For kernels that do not support
the PERF_FLAG_FD_CLOEXEC flag the probe fails with EINVAL. Since this
errno is not handled pid is not reset to 0 and the subsequent use of
pid = -1 as an argument brings in an additional failure path if
perf_event_paranoid > 0:

$ perf record -- sleep 1
perf_event_open(..., 0) failed unexpectedly with error 13 (Permission denied)
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.007 MB /tmp/perf.data (11 samples) ]

Also, ensure the fd of the confirmation check is closed and comment why
pid = -1 is used.

Needs to go to 3.18 stable tree as well.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Based-on-patch-by: David Ahern <david.ahern@oracle.com>
Acked-by: David Ahern <david.ahern@oracle.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/54EC610C.8000403@intel.com
Cc: stable@vger.kernel.org  # v3.18+
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25 16:40:13 -03:00
Mike Looijmans
4bf828cf0f power: ltc2941-battery-gauge: Fix typo in conversion formula (58 instead of 85)
The driver reported 30% less than actually measured. This turned out to
be caused by a simple typo in the formula to calculate the LSB quantity.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 20:35:29 +01:00
Sebastian Andrzej Siewior
54cf776a9c perf data: Add a 'perf' prefix to the generic fields
Some of the tracers bring their own id or pid fields and we can end up
having two of them. This patch adds a "perf_" prefix to the 'generic'
fields so we avoid a clash of the member names.

The change is visible in the babeltrace output:

Before:
  $ babeltrace ./ctf-data/
  [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
  [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
  ...

Now:
  $ babeltrace ./ctf-data/
  [03:19:13.962131936] (+0.000001935) cycles: { }, { perf_ip = 0xFFFFFFFF8105443A, perf_tid = 20714, perf_pid = 20714, perf_period = 8 }
  [03:19:13.962133732] (+0.000001796) cycles: { }, { perf_ip = 0xFFFFFFFF8105443A, perf_tid = 20714, perf_pid = 20714, perf_period = 114 }
  ...

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-5-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25 16:14:33 -03:00
Jiri Olsa
edbe9817ae perf data: Add perf data to CTF conversion support
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.

To convert perf.data into CTF run:
  $ perf data convert --to-ctf=./ctf-data/
  [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
  [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]

The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.

Each sample_type bit is translated into separated CTF event field apart
from following exceptions:

  PERF_SAMPLE_RAW          - added in next patch
  PERF_SAMPLE_READ         - TODO
  PERF_SAMPLE_CALLCHAIN    - TODO
  PERF_SAMPLE_BRANCH_STACK - TODO
  PERF_SAMPLE_REGS_USER    - TODO
  PERF_SAMPLE_STACK_USER   - TODO

  $ perf --debug=data-convert=2 data convert ...

The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].

  $ babeltrace ./ctf-data/
  [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
  [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
  [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
  [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
  [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
  [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
  [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
  [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
  [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }

The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:

  - domain

    It says "kernel" because it contains a kernel trace (not to be
    confused with a user space like lttng-ust does)

  - tracer_name

    It says perf. This can be used to distinguish between lttng and perf
    CTF based trace.

  - version

    The kernel version from stream. In addition to release, this is what
    it looks like on a Debian kernel:

      release = "3.14-1-amd64";
      version = "3.14.0";

[1] http://projects.eclipse.org/projects/tools.tracecompass

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25 16:13:12 -03:00
Dan Carpenter
9603cded0e ALSA: cmipci: remove a stray space character
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-25 20:08:44 +01:00
Dan Carpenter
7f788e0cc0 ALSA: azt3328: some indenting cleanups
A few minor tweaks to make things line up correctly.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-25 20:08:35 +01:00
Dan Carpenter
f0418d46d6 sound/sb_midi: a couple indenting fixes
Let's make things line up a little bit better.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-25 20:08:27 +01:00
Dan Carpenter
e214e5183d sound/sb_ess: white space cleanups
These weren't aligned on the same lines as the surrounding code and the
printk was quite messy.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-25 20:08:21 +01:00
Dan Carpenter
df403869e3 sound/oss/opl3: remove some stray whitespace
Removed an extra tab and a extra space character.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-25 20:08:15 +01:00
Dan Carpenter
19449593d6 sound: sys_timer: indent poll_def_tmr() correctly
The indenting here was really whacky and not consistent from one line to
the next.  I also reverse the "if (opened)" and "if (tmr_running)" tests
so that I could remove two indent levels.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-25 20:08:07 +01:00
Arnd Bergmann
6af714b069 Fixes for various omap devices. It's all dts and defconfig
changes for this set:
 
 - Fix wrong DMA properties for dma to avoid them getting
   copied wrong again before we start actually using them
 
 - USB fixes to revert the extcon changes as the driver did not
   get merged yet and cause issues
 
 - Omap5 and dra7 fixes to boot from sata
 
 - Fix few am437x issues for i2c and pinctrl
 
 - Fix beaglebone for hardwared USB configuration
 
 - Defconfig changes for NAND, SATA and TPS62362
 
 - Fix n900 i2c numbering for legacy user space and smc91x
   register offset so it works also for qemu
 
 - Fix incomplete USB configuration for dm816x
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU7NU9AAoJEBvUPslcq6VzGHYP/j815CZXRptbhdWFBg/Sv2UX
 l5hpnP1lW667yEmb4haNfFUyBYPHrzk0U78WB8IsEMR9C4ZJGfaiZdSv/BDAYH5z
 AHBjOb21K+q4+830i4sWT6LsCWPaCcJ5LxBNtvPtcpFltUjJzraC9a3vtrEXLRvY
 ALij2+3epcxKeR1BO7Sy+cnFShNMXTbSIr82MQsPIX5wFOn/vzytj+/4+OBac8vY
 OhGneKsvGHGv2jvoOOhkpjFCWrojaKkdS75XIrdBp7JPKjRREr08LeoqdZMJu6BQ
 xzIVkDnSojw4Vn+R+glekDP+ldPh+HGzf6OQabyCa1o4D1hriKiauON9Odk0z8Vr
 qLnh2UwRRbNSGaGYR0OLSXUy6sZX1eBfaeoe+691t0UHLylm81ZPTuSfd7MVGElp
 sFq0Jq6dw+Ech2A1lbMAl8d8aO0CQlr5uF2+9HfoIkZxjktKmJMNuNvL3M4b4kPS
 uUgcch40vqdOyrV5qz3/Nwn/e7/hk/i23vbNgsuYauV0CxGA0c6/Nk+TP8hH8fYW
 XSFacaEEaK2Sj40Lyw6o/15Fr5rfG51vX/jNz2NgDbdJUYT42KK/Hr3AZrXQPyBf
 YQWjrL6NgcwdX2v2KhsCLyo2ABp8RgPYQVDAC8LNZNCUBar9+l6+a1e1lMfPnNKq
 4IAZO4ftH3x71V+nQMVS
 =oG7A
 -----END PGP SIGNATURE-----

Merge tag 'fixes-v4.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for various omap devices. It's all dts and defconfig
changes for this set:

- Fix wrong DMA properties for dma to avoid them getting
  copied wrong again before we start actually using them

- USB fixes to revert the extcon changes as the driver did not
  get merged yet and cause issues

- Omap5 and dra7 fixes to boot from sata

- Fix few am437x issues for i2c and pinctrl

- Fix beaglebone for hardwared USB configuration

- Defconfig changes for NAND, SATA and TPS62362

- Fix n900 i2c numbering for legacy user space and smc91x
  register offset so it works also for qemu

- Fix incomplete USB configuration for dm816x

* tag 'fixes-v4.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-bone*: usb0 is hardwired for peripheral
  ARM: dts: dra7x-evm: beagle-x15: Fix USB Host
  ARM: omap2plus_defconfig: Fix SATA boot
  ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver
  ARM: dts: dra7: Correct the dma controller's property names
  ARM: dts: omap5: Correct the dma controller's property names
  ARM: dts: omap4: Correct the dma controller's property names
  ARM: dts: omap3: Correct the dma controller's property names
  ARM: dts: omap2: Correct the dma controller's property names
  ARM: dts: am437x-idk: fix sleep pinctrl state
  ARM: omap2plus_defconfig: enable TPS62362 regulator
  ARM: dts: am437x-idk: fix TPS62362 i2c bus
  ARM: dts: n900: Fix offset for smc91x ethernet
  ARM: dts: n900: fix i2c bus numbering
  ARM: dts: Fix USB dts configuration for dm816x
  ARM: dts: OMAP5: Fix SATA PHY node
  ARM: dts: DRA7: Fix SATA PHY node
2015-02-25 17:12:35 +01:00
Sudeep Holla
7934d69abf arm64: Add L2 cache topology to ARM Ltd boards/models
Commit 5d425c1865 ("arm64: kernel: add support for cpu cache
information") adds cacheinfo support for ARM64. Since there's no
architectural way of detecting the cpus that share particular cache,
device tree can be used and the core cacheinfo already supports the
same.

This patch adds the L2 cache topology on Juno board, FVP/RTSM and
foundation models.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-25 17:12:21 +01:00
Michel Thierry
06dc68d680 drm/i915: Plumb drm_device through page tables operations
The next patch in the series will require it for alloc_pt_single.

v2: Rebased after s/page_tables/page_table/.

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 16:56:57 +01:00
Ben Widawsky
06fda602db drm/i915: Create page table allocators
As we move toward dynamic page table allocation, it becomes much easier
to manage our data structures if break do things less coarsely by
breaking up all of our actions into individual tasks.  This makes the
code easier to write, read, and verify.

Aside from the dissection of the allocation functions, the patch
statically allocates the page table structures without a page directory.
This remains the same for all platforms,

The patch itself should not have much functional difference. The primary
noticeable difference is the fact that page tables are no longer
allocated, but rather statically declared as part of the page directory.
This has non-zero overhead, but things gain additional complexity as a
result.

This patch exists for a few reasons:
1. Splitting out the functions allows easily combining GEN6 and GEN8
code. Page tables have no difference based on GEN8. As we'll see in a
future patch when we add the DMA mappings to the allocations, it
requires only one small change to make work, and error handling should
just fall into place.

2. Unless we always want to allocate all page tables under a given PDE,
we'll have to eventually break this up into an array of pointers (or
pointer to pointer).

3. Having the discrete functions is easier to review, and understand.
All allocations and frees now take place in just a couple of locations.
Reviewing, and catching leaks should be easy.

4. Less important: the GFP flags are confined to one location, which
makes playing around with such things trivial.

v2: Updated commit message to explain why this patch exists

v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/

v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel)

v5: Added additional safety checks in gen8 clear/free/unmap.

v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika).

v7: Make err_out loop symmetrical to the way we allocate in
alloc_pt_range. Also s/page_tables/page_table and correct commit
message (Mika)

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 16:53:43 +01:00
Ben Widawsky
7324cc0491 drm/i915: Complete page table structures
Move the remaining members over to the new page table structures.

This can be squashed with the previous commit if desire. The reasoning
is the same as that patch. I simply felt it is easier to review if split.

v2: In lrc: s/ppgtt->pd_dma_addr[i]/ppgtt->pdp.page_directory[i].daddr/
v3: Rebase.
v4: Rebased after s/page_tables/page_table/.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 16:53:07 +01:00
Ben Widawsky
d7b3de9121 drm/i915: page table abstractions
When we move to dynamic page allocation, keeping page_directory and pagetabs as
separate structures will help to break actions into simpler tasks.

To help transition the code nicely there is some wasted space in gen6/7.
This will be ameliorated shortly.

Following the x86 pagetable terminology:
PDPE = struct i915_page_directory_pointer_entry.
PDE = struct i915_page_directory_entry [page_directory].
PTE = struct i915_page_table_entry [page_tables].

v2: fixed mismatches after clean-up/rebase.

v3: Clarify the names of the multiple levels of page tables (Daniel)

v4: Addressing Mika's review comments.
s/gen8_free_page_directories/gen8_free_page_directory and free the
page tables for the directory there.
In gen8_ppgtt_allocate_page_directories, do not leak previously allocated
pt in case the page_directory alloc fails.
Update error return handling in gen8_ppgtt_alloc.

v5: Do not leak pt on error in gen6_ppgtt_allocate_page_tables. (Mika)

v6: s/page_tables/page_table/. (Mika)

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 16:52:34 +01:00