Commit graph

536,164 commits

Author SHA1 Message Date
Anjali Singhai
7f9ff47683 i40e: Fix the case where per TC queue count was higher than queues enabled
When the driver or hardware gets less interrupt vectors than the actual
number of CPU cores, limit the queue count for the priority queue
traffic class (TC) queues.

This will fix a warning with multiple function mode where systems
regularly have more cores than vectors.

Also add extra comment for readability.

Change-ID: I4f02226263aa3995e1f5ee5503eac0cd6ee12fbd
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young  <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:59 -08:00
Jesse Brandeburg
a68de58d27 i40e: fix race in hang check
The driver was having some issues with false Tx hang detection. This
makes the driver a little more direct with the checks for progress
forward by directly checking the head write back address and tail register
when determining progress.  This avoids Tx hangs where the software
gets behind, because we are directly checking hardware state when
determining hang state.

Change-ID: I774f0e861c9e8ab5ccb213634100fe15440ae24a
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:59 -08:00
Anjali Singhai
71da61976e i40e: Fix TSO with more than 8 frags per segment issue
The hardware has some limitations the driver needs to adhere to,
that we found in extended testing.
  1) no more than 8 descriptors per packet on the wire
  2) no header can span more than 3 descriptors

If one of these events occurs, the hardware will generate an internal
error and freeze the Tx queue.

This patch linearizes the skb to avoid these situations.

Change-ID: I37dab7d3966e14895a9663ec4d0aaa8eb0d9e115
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:58 -08:00
Akeem G Abodunrin
b67a03357c i40e: Don't check for Tx hang when PF down
This patch adds check to bail out if device is already down when checking
for Tx hang subtask.

Change-ID: I3853fb7a6d11cb9a4c349b687cb25c15b19977a0
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:57 -08:00
Shannon Nelson
de78fc5ac1 i40e: fix shift precedence issue
Add parens to make sure the shift and bitwise precedences don't work backwards
for us.

Change-ID: I60c10ef4fad6bc654522b9d8a53da2e270a0f268
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:57 -08:00
Alexey Khoroshilov
dda094a312 i40e: Fix memory leak at failure path in i40e_dbg_command_write()
The patch fixes a leak of 'cmd_buf' when copy_from_user() failed
in i40e_dbg_command_write().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:56 -08:00
Mauro Carvalho Chehab
a3dfc6d925 [media] dvb-usb: create one media_dev per adapter
Instead of assuming just one adapter, change the code to store
one media controller per adapter.

This works fine for dvb-usb, as, on all drivers here, it is not
possible to write a media graph that would mix resources between
the two different adapters.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:52:26 -03:00
Rafael Lourenço de Lima Chehab
496ccf92b9 [media] dvb-usb: add support for the media controller at USB driver
Create a struct media_device and add it to the dvb adapter.

Please notice that the tuner is not mapped yet by the dvb core.

[mchehab@osg.samsung.com: use config option MEDIA_CONTROLLER_DVB]
Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:52:26 -03:00
Mauro Carvalho Chehab
823b460ee7 [media] dvb-usb-v2: create one media_dev per adapter
Instead of assuming just one adapter, change the code to store
one media controller per adapter.

This works fine for dvb-usb, as, on all drivers here, it is not
possible to write a media graph that would mix resources between
the two different adapters.

Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:52:25 -03:00
Rafael Lourenço de Lima Chehab
6f6c77d8d2 [media] dvb-usb-v2: add support for the media controller at USB driver
Create a struct media_device and add it to the dvb adapter.

Please notice that the tuner is not mapped yet by the dvb core.

[mchehab@osg.samsung.com: use config option MEDIA_CONTROLLER_DVB due to a rebase]
Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:49:07 -03:00
Mauro Carvalho Chehab
4b208f8b56 [media] siano: register media controller earlier
We need to initialize the media controller earlier, as the core
will call the smsdvb hotplug during register time. Ok, this is
an async operation, so, when the module is not loaded, the media
controller works.

However, if the module is already loaded, nothing will be
registered at the media controller, as it will load too late.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:39 -03:00
Mauro Carvalho Chehab
fb372a434d [media] siano: print a message if DVB register succeeds
Right now, this is a debug message, misplaced. Promote it
to an info message, as it helps to discover if something
bad happened during device init.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:05 -03:00
Mauro Carvalho Chehab
d9f3836b7b [media] siano: get rid of sms_dbg parameter
All siano modules have a sms_dbg parameter. Now that we're using
the standard pr_debug() macro, we can get rid of it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:05 -03:00
Mauro Carvalho Chehab
0dd5f20cb3 [media] siano: get rid of sms_info()
On most cases, sms_info() should actually be pr_debug(), but,
on other places, it should be pr_info().

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:04 -03:00
Mauro Carvalho Chehab
6908368879 [media] siano: replace sms_debug() by pr_debug()
There's no reason to use a macro here. Just replace everything,
and let those debug messages to be activated via dynamic printk.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:04 -03:00
Mauro Carvalho Chehab
9b283e6796 [media] siano: replace sms_log() by pr_debug()
Despite its name, those functions are acutally debug
prints for the IR part of the driver. So, properly
map them using pr_debug()

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:03 -03:00
Mauro Carvalho Chehab
5ed0a2c7ec [media] siano: replace sms_err by pr_err
Originally, sms_err() would be also displaying the line where
the error occurs, but the messages are clear enough. Also,
the function is always printed. So, no need for it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:02 -03:00
Mauro Carvalho Chehab
535bd1e96e [media] siano: replace sms_warn() by pr_warn()
There's no reason for a sms' own sms_warn macro. Just replace
it by the standard pr_warn().

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:02 -03:00
Mauro Carvalho Chehab
5e022d1aa0 [media] siano: use pr_* print functions
Instead of defining its own set of printk functions, let's
use the common Kernel debug logic provided by pr_foo functions.

As a first step, let's just define the existing macros as the
Kernel ones.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 09:10:01 -03:00
Mauro Carvalho Chehab
46b1e21fe5 [media] siano: add support for the media controller at USB driver
Adding support for the media controller for a pure DVB device
is simple: just create a struct media_device and add it to the
dvb adapter. After creating all DVB devices, we need to call
the DVB core, for it to create the media graph.

More work is needed for pure DVB tuners, but this is hidden
at the Siano driver, just like several others non-hybrid
devices. So, this is streight forward.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:46:48 -03:00
Mauro Carvalho Chehab
7e4f23d53d [media] cx25840: better document the media pads
Use an enum to better document the media pads.

No functional changes.

Suggested-by: Prabhakar Lad <prabhakar.csengg@gmail.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:45:58 -03:00
Mauro Carvalho Chehab
db74935905 [media] cx25840: fix return logic when media entity init fails
There's no need to free state, as it was allocated via devm_kzalloc().

Also, let's return the error code, instead of something else.

Reported-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:45:42 -03:00
Mauro Carvalho Chehab
3d263114c4 [media] cx231xx: enable the analog tuner at buffer setup
buf_prepare callback is called for every queued buffer. This is
an overkill. Call it at buf_setup, as this should be enough.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:45:25 -03:00
Mauro Carvalho Chehab
7e2b41e912 [media] cx231xx: Improve the media controller comment
There are two problems at the comment:
- it is badly idented;
- its comment doesn't mean anything.

Fix it.

Requested-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:45:01 -03:00
Mauro Carvalho Chehab
18e8d630cc [media] cx25840: better document the media controller TODO
Analog video inputs are the tuner, plus composite, svideo, etc,
 e. g. the input pat should actually be like:

                ___________
TUNER --------> |         |
                |         |
SVIDEO .......> | cx25840 |
                |         |
COMPOSITE1 ...> |_________|

(in the above, dashes represent the enabled link, and periods
represent the disabled ones)

In other words, if we want to properly represent the pipeline,
it should be possible to see via the media controller if the tuner
is being used as an image source, or if the source is something else.

I didn't map those other inputs here yet, due to a few things:
- The extra inputs would require subdevs that won't be controlled
- I was in doubt about the best way for doing that
- That would likely require some extra setup for cx25840 caller
  drivers, in order to represent what of the possible internal
  inputs are actually used on each specific board

Actually, at least for now, I was unable to see much benefit
on adding such map now, so let's just document it, as this could
be added later on, as needed.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:44:40 -03:00
Mauro Carvalho Chehab
e4fd3bc504 [media] dvb core: rename the media controller entities
Prefix all DVB media controller entities with "dvb-" and use dash
instead of underline at the names.

Requested-by: Hans Verkuil <hans.verkuil@cisco.com>

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:44:19 -03:00
Mauro Carvalho Chehab
daf77bd9c2 [media] tuner-core: fix compilation if the media controller is not defined
drivers/media/v4l2-core/tuner-core.c:440:7: error: 'struct v4l2_subdev' has no member named 'entity'
     t->sd.entity.name = t->name;

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:44:04 -03:00
Mauro Carvalho Chehab
63ba8c7518 [media] cx231xx: fix compilation if the media controller is not defined
drivers/media/usb/cx231xx/cx231xx-cards.c: In function ‘cx231xx_usb_probe’:
drivers/media/usb/cx231xx/cx231xx-cards.c:1589:15: error: ‘struct v4l2_device’ has no member named ‘mdev’
  dev->v4l2_dev.mdev = dev->media_dev;
               ^
drivers/media/usb/cx231xx/cx231xx-cards.c:1589:26: error: ‘struct cx231xx’ has no member named ‘media_dev’
  dev->v4l2_dev.mdev = dev->media_dev;
                          ^
scripts/Makefile.build:257: recipe for target 'drivers/media/usb/cx231xx/cx231xx-cards.o' failed

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:43:49 -03:00
Mauro Carvalho Chehab
c1bd57d30b [media] dvb-frontend: remove a warning
if CONFIG_MEDIA_CONTROLLER_DVB is not selected, it is now
producing this warning:

drivers/media/dvb-core/dvb_frontend.c: In function ‘dvb_frontend_thread’:
drivers/media/dvb-core/dvb_frontend.c:695:6: warning: unused variable ‘ret’ [-Wunused-variable]
  int ret;
      ^

Reported-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:43:29 -03:00
Hans Verkuil
7e182f7898 [media] media.h: mark alsa struct in media_entity_desc as TODO
The alsa struct in struct media_entity_desc is now marked as deprecated.
However, the alsa struct should remain as it is since it cannot be replaced
by a simple major/minor device node description. The alsa struct was designed
to be used as an alsa card description so V4L2 drivers could use this to expose
the alsa card that they create to carry the captured audio. Such a card is not
just a PCM device, but also needs to contain the alsa subdevice information,
and it may map to multiple devices, e.g. a PCM and a mixer device, such as the
au0828 usb stick creates.

This is exactly as intended and this cannot and should not be replaced by a
simple major/minor.

However, whether this information is in the right form for an ALSA device such
that it can handle udev renaming rules as well is another matter. So mark this
alsa struct as TODO and document the problems involved.

Updated the documentation as well to reflect this and to add the 'major'
and 'minor' field documentation.

Updated the documentation to clearly state that struct dev is to be used for
(sub-)devices that create a single device node. Other devices need their own
structure here.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:40:10 -03:00
Wang Nan
b4d8327024 x86/traps: Enable DEBUG_STACK after cpu_init() for TRAP_DB/BP
Before this patch early_trap_init() installs DEBUG_STACK for
X86_TRAP_BP and X86_TRAP_DB. However, DEBUG_STACK doesn't work
correctly until cpu_init() <-- trap_init().

This patch passes 0 to set_intr_gate_ist() and
set_system_intr_gate_ist() instead of DEBUG_STACK to let it use
same stack as kernel, and installs DEBUG_STACK for them in
trap_init().

As core runs at ring 0 between early_trap_init() and
trap_init(), there is no chance to get a bad stack before
trap_init().

As NMI is also enabled in trap_init(), we don't need to care
about is_debug_stack() and related things used in
arch/x86/kernel/nmi.c.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: <dave.hansen@linux.intel.com>
Cc: <lizefan@huawei.com>
Cc: <luto@amacapital.net>
Cc: <oleg@redhat.com>
Link: http://lkml.kernel.org/r/1424929779-13174-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-26 12:29:20 +01:00
Ingo Molnar
0afb170401 perf/core improvements and fixes:
New user selectable features:
 
 - Support recording running/enabled time in 'perf record' (Andi Kleen)
 
 - New tool: 'perf data' for converting perf.data to other formats,
   initially for the CTF (Common Trace Format) from LTTng (Jiri Olsa, Sebastian Siewior)
 
 User visible:
 
 - Only insert blank duration bracket when tracing syscalls in 'perf trace' (Arnaldo Carvalho de Melo)
 
 - Filter out the trace pid when no threads are specified in 'perf trace' (Arnaldo Carvalho de Melo)
 
 - Add 'perf trace' man page entry for --event (Arnaldo Carvalho de Melo)
 
 - Dump stack on segfaults in 'perf trace' (Arnaldo Carvalho de Melo)
 
 Infrastructure:
 
 - Introduce set_filter_pid and set_filter_pids methods in the evlist class (Arnaldo Carvalho de Melo)
 
 - Some perf_session untanglement patches, removing the need to pass a
   perf_session instance for things that are related to evlists, so that
   tools that don't deal with perf.data files like trace in live mode can
   make use of the ordered_events class (Arnaldo Carvalho de Melo)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU7j2lAAoJEBpxZoYYoA71cxcH/2dqKGTtqucEgKwpOdo8uf5v
 uWFtLzHNxJXYYm1kpwxOj3aMIoEfyfTngLgumgzMVdeQ8+rZGWgF7FMz2Gdn0HJi
 5CWrT/keZz8iHxA6BI8NBAa4uO8ct4MHjHSsYuO8Fr4zQmQy9vprfl8D44BQFQr9
 6C35dTjP8chIUFLxL2Y5Wr1SATeZf+zJJVoGUES1xgk7iMCfgivg6vSQcGmgBbe6
 iJBqDpO+10j55X578d5WRV0UMKrHk25RdGBRaB9eA0KowJfKYva744coF7AHOoQR
 snc5Ti93w+ssTL6PSp+FFr81kJVOqQk2GaweMcnNpOP5A8SSS+47yicPUZ25Nng=
 =wb9I
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New user selectable features:

  - Support recording running/enabled time in 'perf record' (Andi Kleen)

  - New tool: 'perf data' for converting perf.data to other formats,
    initially for the CTF (Common Trace Format) from LTTng (Jiri Olsa, Sebastian Siewior)

User visible changes:

  - Only insert blank duration bracket when tracing syscalls in 'perf trace' (Arnaldo Carvalho de Melo)

  - Filter out the trace pid when no threads are specified in 'perf trace' (Arnaldo Carvalho de Melo)

  - Add 'perf trace' man page entry for --event (Arnaldo Carvalho de Melo)

  - Dump stack on segfaults in 'perf trace' (Arnaldo Carvalho de Melo)

Infrastructure changes:

  - Introduce set_filter_pid and set_filter_pids methods in the evlist class (Arnaldo Carvalho de Melo)

  - Some perf_session untanglement patches, removing the need to pass a
    perf_session instance for things that are related to evlists, so that
    tools that don't deal with perf.data files like trace in live mode can
    make use of the ordered_events class (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-26 12:25:20 +01:00
Ingo Molnar
e9e4e44309 Linux 34.0-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU6pFJAAoJEHm+PkMAQRiG2OwH/24nDK+l9zkaRs0xJsVh+qiW
 8A2N1od0ickz43iMk48jfeWGkFOkd4izyvan/daJshJOE1Y5lCdSs7jq/OXVOv9L
 G0+KQUoC5NL0hqYKn1XJPFluNQ1yqMvrDwQt99grDGzruNGBbwHuBhAQmgzpj1nU
 do8KrGjr7ft1Rzm4mOAdET/ExWiF+mRSJSxxOv598HbsIRdM5wgn0hHjPlqDxmLN
 KH4r3YYEm0cHyjf4Krse0+YdhqdamRGJlmYxJgEsYNwCoMwkmHlLTc71diseUhrg
 r/VYIYQvpAA6Yvgw8rJ0N5gk/sJJig+WyyPhfQuc2bD5sbL9eO7mPnz2UP7z7ss=
 =vXB6
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc1' into perf/core, to refresh the tree

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-26 12:24:50 +01:00
Miklos Szeredi
aa991b3b26 fuse: set stolen page uptodate
Regular pipe buffers' ->steal method (generic_pipe_buf_steal()) doesn't set
PG_uptodate.

Don't warn on this condition, just set the uptodate flag.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: stable@vger.kernel.org
2015-02-26 11:45:47 +01:00
Miklos Szeredi
0d2783626a fuse: notify: don't move pages
fuse_try_move_page() is not prepared for replacing pages that have already
been read.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: stable@vger.kernel.org
2015-02-26 11:45:47 +01:00
Tomi Valkeinen
fe59e5cf4a OMAPDSS: workaround for MFLAG + NV12 issue
It was found that having two displays enabled and having an NV12 overlay
on one of the displays will cause underflows/synclosts. Debugging this
pointed to some issue with MFLAG.

It is unclear why this issue is happening, but it looks like there is a
HW bug related to MFLAG and FIFO management. Disabling MFLAG makes this
issue go away, but then we lose the benefit of MFLAG. Also forcing MFLAG
always on makes the issue go away.

Also, using certain values for MFLAG_START, MFLAG thresholds and PRELOAD
makes the issue go away, but there was no obvious logic to which values
work and which don't.

As a workaround until more information about this is found, force MFLAG
always on to make NV12 usable.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:14 +02:00
Tomi Valkeinen
c64aa3a660 OMAPDSS: Add support for MFLAG
OMAP5 has support for MFLAG feature, which allows DSS to dynamically
increase the priority of DISPC's DMA traffic. At the moment we don't
have support for it.

It was noticed that on DRA7 with high bandwidth use cases we see FIFO
underflows. Implementing MFLAG support removed those underflows.
Interestingly, on OMAP5 uEVM no such overflows were seen.

This patch adds a simple MFLAG implementation, where we use a fixed
MFLAG threshold value based on the FIFO size. The thresholds are set to
4/8 of fifo size for low threshold, and 5/8 of fifo size for high
threshold.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:14 +02:00
Tomi Valkeinen
47fc469b3a OMAPDSS: setup default fifo thresholds
At the moment we don't setup FIFO thresholds by default in omapdss. It's
supposed to be done by the user of omapdss. And that is missing from
omapdrm, causing unoptimal thresholds to be used when using omapdrm.

While I believe it's in theory better to allow the user of omapdss to
setup the fifo thresholds, in practice we always use the same values,
and we could as well setup the thresholds in omapdss.

Furthermore, in omapdss init we always swap the FIFO used for GFX and WB
overlays, but we don't swap the FIFO thresholds for those overlays
(which is the reason for omapdrm using unoptimal HW reset values). So
it would make sense to setup the thresholds to account for the swapping
of the FIFOs.

So, this patch adds code to setup default FIFO tresholds at omapdss
init.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:13 +02:00
Tomi Valkeinen
d49cd15550 OMAPDSS: DISPC: lock access to DISPC_CONTROL & DISPC_CONFIG
Dispc driver presumes that the callers handle locking for all normal
functions. However, omapdrm doesn't handle this, and presumes that all
overlay manager registers are private to that overlay manager, and thus
presumes that configurations for overlay managers can be written via
different threads freely.

For many registers the above is true. The exceptions are DISPC_CONTROL
and DISPC_CONFIG registers, which contain bits for both LCD and TV
overlay managers.

Fixing this properly in omapdrm means a big omapdrm rewrite. So, for
now, add locking to dispc for the problematic registers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Somnath Mukherjee <somnath@ti.com>
2015-02-26 12:15:13 +02:00
Tomi Valkeinen
4e1d3ca083 OMAPDSS: DISPC: fix div by zero issue in overlay scaling
omapdrm doesn't always configure the overlays correctly, causing the
overlay setup functions to be called with zero timings. This leads to
division by zero error.

This happens, for example, when a HDMI cable is not connected, but a
user tries to setup a plane with scaling.

Fixing omapdrm is a big job, so for now let's check for the bad timings
in DISPC and return an error.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:13 +02:00
Tomi Valkeinen
386f167c69 OMAPDSS: DISPC: change sync_pclk_edge default value
The common 'struct videomode' does not have a flag to select when the
sync signals should be driven.

The default behavior of DISPC HW is to drive the sync signal on the
opposite pixel clock edge from data signal, which is also what the
videomode_to_omap_video_timings() uses.

However, it looks like what panels usually expect is that the data and
sync signals are driven on the same edge, so let's change
videomode_to_omap_video_timings() to set the sync_pclk_edge accordingly.

Note that this only affect panels drivers that use
videomode_to_omap_video_timings(), probably when getting the video
timings directly from DT data. The drivers can still configure the
sync_pclk_edge independently if they so wish.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:12 +02:00
Tomi Valkeinen
7ad582be12 OMAPDSS: change signal_level & signal_edge enum values
At the moment the enum values for ACTIVE_HIGH and RISING_EDGE are 0, and
ACTIVE_LOW and FALLING_EDGE are 1, to match the values programmed to HW.
The previous patch removed this dependency.

Swap the enum values the other way around. This doesn't change the
behavior in any way, but makes it easier to debug as value of '1' means
HIGH or RISING.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:12 +02:00
Tomi Valkeinen
ed35188158 OMAPDSS: DISPC: explicit handling for sync and de levels
When configuring the lcd timings, instead of writing enum values
directly to the HW, use switch-case to get the value to be programmed.

This is safer and also allows us to change the enum values.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:12 +02:00
Tomi Valkeinen
7a16360d56 OMAPDSS: DISPC: remove OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES
DISPC can drive data lines either on rising or falling pixel clock edge,
which can be configured by the user.

Sync lines can also be driven on rising or falling pixel clock edge, but
additionally the HW can be configured to drive the sync lines on
opposite clock edge from the data lines.

This opposite edge setting does not make any sense, as the same effect
can be achieved by just setting the sync lines to be driven on the other
edge compared to the data lines. It feels like some kind of backward
compatibility option, even if all DSS versions seem to have the same
implementation.

To simplify the code and configuration of the signals, and to make the
dispc timings more compatible with what is used on other platforms,
let's just remove the whole opposite-edge support.

The drivers that used OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES setting are
changed so that they use the opposite setting from the data edge.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:11 +02:00
Tomi Valkeinen
6246c8b57c OMAPDSS: TFP410: fix input sync signals
TFP410 requires that DE is active high and the data and syncs are driven
on rising pixel clock edge. However, at the moment the driver doesn't
request such syncs, and the end result is that the sync settings depend
on default values, which are not right in all cases.

Set the sync values explicitly.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:11 +02:00
Tomi Valkeinen
e566658f2e OMAPDSS: fix paddr check for TILER addresses
The DISPC driver checks that the buffer address is not 0. However, when
using TILER, the address space is TILER specific and 0 is a valid
address.

Fix the check to allow address of 0 for TILER.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: srinivas pulukuru <srinivas.pulukuru@ti.com>
2015-02-26 12:15:11 +02:00
Richard Fitzgerald
575ef7f6d5 ASoC: arizona: Add support for WM8280/WM8281
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:45 +00:00
Richard Fitzgerald
2f2b6aa8c5 extcon: arizona: Add support for WM8280/WM8281
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:44 +00:00
Richard Fitzgerald
449c175ec6 gpio: arizona: Add support for WM8280/WM8281
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:43 +00:00
Richard Fitzgerald
f7293114b4 regulator: arizona-micsupp: Add support for WM8280/WM8281
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:43 +00:00