[ Upstream commit 9415f749d3 ]
handle_pmi_common() may observe an active bit set in cpuc->active_mask
while the corresponding cpuc->events[] entry has already been cleared,
which leads to a NULL pointer dereference.
This can happen when interrupt throttling stops all events in a group
while PEBS processing is still in progress. perf_event_overflow() can
trigger perf_event_throttle_group(), which stops the group and clears
the cpuc->events[] entry, but the active bit may still be set when
handle_pmi_common() iterates over the events.
The following recent fix:
7e772a93eb ("perf/x86: Fix NULL event access and potential PEBS record loss")
moved the cpuc->events[] clearing from x86_pmu_stop() to x86_pmu_del() and
relied on cpuc->active_mask/pebs_enabled checks. However,
handle_pmi_common() can still encounter a NULL cpuc->events[] entry
despite the active bit being set.
Add an explicit NULL check on the event pointer before using it,
to cover this legitimate scenario and avoid the NULL dereference crash.
Fixes: 7e772a93eb ("perf/x86: Fix NULL event access and potential PEBS record loss")
Reported-by: kitta <kitta@linux.alibaba.com>
Co-developed-by: kitta <kitta@linux.alibaba.com>
Signed-off-by: Evan Li <evan.li@linux.alibaba.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251212084943.2124787-1-evan.li@linux.alibaba.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220855
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2214ec4bf8 ]
In 'ocfs2_merge_rec_left()', do not reset 'left_path' to NULL after
move, thus allowing 'ocfs2_free_path()' to free it before return.
Link: https://lkml.kernel.org/r/20251205065159.392749-1-dmantipov@yandex.ru
Fixes: 677b975282 ("ocfs2: Add support for cross extent block")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reported-by: syzbot+cfc7cab3bb6eaa7c4de2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cfc7cab3bb6eaa7c4de2
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c94291914b ]
On SMP systems the CPU hotplug callbacks in the "starting" range are
invoked while the CPU is brought up and interrupts are still
disabled. Callbacks which are added later are invoked via the
hotplug-thread on the target CPU and interrupts are explicitly disabled.
In the UP case callbacks which are added later are invoked directly without
the thread indirection. This is in principle okay since there is just one
CPU but those callbacks are invoked with interrupt disabled code. That's
incorrect as those callbacks assume interrupt disabled context.
Disable interrupts before invoking the callbacks on UP if the state is
atomic and interrupts are expected to be disabled. The "save" part is
required because this is also invoked early in the boot process while
interrupts are disabled and must not be enabled prematurely.
Fixes: 06ddd17521 ("sched/smp: Always define is_percpu_thread() and scheduler_ipi()")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251127144723.ev9DuXXR@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dbc0d40d8 ]
If irq_domain_translate_twocell() sets "hwirq" to >= MCHP_EIC_NIRQ (2) then
it results in an out of bounds access.
The code checks for invalid values, but doesn't set the error code. Return
-EINVAL in that case, instead of returning success.
Fixes: 00fa3461c8 ("irqchip/mchp-eic: Add support for the Microchip EIC")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://patch.msgid.link/aTfHmOz6IBpTIPU5@stanley.mountain
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c418d8b4d7 ]
For events with inherit_stat enabled, a "read" event will be generated
to collect per task event counts on task exit.
The call chain is as follows:
do_exit
-> perf_event_exit_task
-> perf_event_exit_task_context
-> perf_event_exit_event
-> perf_remove_from_context
-> perf_child_detach
-> sync_child_event
-> perf_event_read_event
However, the child event context detaches the task too early in
perf_event_exit_task_context, which causes sync_child_event to never
generate the read event in this case, since child_event->ctx->task is
always set to TASK_TOMBSTONE. Fix that by moving context lock section
backward to ensure ctx->task is not set to TASK_TOMBSTONE before
generating the read event.
Because perf_event_free_task calls perf_event_exit_task_context with
exit = false to tear down all child events from the context, and the
task never lived, accessing the task PID can lead to a use-after-free.
To fix that, let sync_child_event read task from argument and move the
call to the only place it should be triggered to avoid the effect of
setting ctx->task to TASK_TOMESTONE, and add a task parameter to
perf_event_exit_event to trigger the sync_child_event properly when
needed.
This bug can be reproduced by running "perf record -s" and attaching to
any program that generates perf events in its child tasks. If we check
the result with "perf report -T", the last line of the report will leave
an empty table like "# PID TID", which is expected to contain the
per-task event counts by design.
Fixes: ef54c1a476 ("perf: Rework perf_event_exit_event()")
Signed-off-by: Thaumy Cheng <thaumy.love@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-perf-users@vger.kernel.org
Link: https://patch.msgid.link/20251209041600.963586-1-thaumy.love@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14be351e5c ]
The UFS error handler may be activated before SCSI scanning has started
and hence before hba->ufs_device_wlun has been set. Check the
hba->ufs_device_wlun pointer before using it.
Cc: Peter Wang <peter.wang@mediatek.com>
Cc: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
Fixes: e23ef4f22d ("scsi: ufs: core: Fix error handler host_sem issue")
Fixes: f966e02ae5 ("scsi: ufs: core: Fix runtime suspend error deadlock")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
Tested-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com> #SM8750
Link: https://patch.msgid.link/20251204170457.994851-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab58153ec6 ]
The delayed work item 'imm_tq' is initialized in imm_attach() and
scheduled via imm_queuecommand() for processing SCSI commands. When the
IMM parallel port SCSI host adapter is detached through imm_detach(),
the imm_struct device instance is deallocated.
However, the delayed work might still be pending or executing
when imm_detach() is called, leading to use-after-free bugs
when the work function imm_interrupt() accesses the already
freed imm_struct memory.
The race condition can occur as follows:
CPU 0(detach thread) | CPU 1
| imm_queuecommand()
| imm_queuecommand_lck()
imm_detach() | schedule_delayed_work()
kfree(dev) //FREE | imm_interrupt()
| dev = container_of(...) //USE
dev-> //USE
Add disable_delayed_work_sync() in imm_detach() to guarantee proper
cancellation of the delayed work item before imm_struct is deallocated.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/20251028100149.40721-1-duoming@zju.edu.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab08f9c8b3 ]
The log_writes_kthread() calls try_to_freeze() but lacks set_freezable(),
rendering the freeze attempt ineffective since kernel threads are
non-freezable by default. This prevents proper thread suspension during
system suspend/hibernate.
Add set_freezable() to explicitly mark the thread as freezable.
Fixes: 0e9cebe724 ("dm: add log writes target")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f6cfd6d7c ]
rs->raid_type is assigned from get_raid_type_by_ll(), which may return
NULL. This NULL value could be dereferenced later in the condition
'if (!(rs_is_raid10(rs) && rt_is_raid0(rs->raid_type)))'.
Add a fail-fast check to return early with an error if raid_type is NULL,
similar to other uses of this function.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 33e53f0685 ("dm raid: introduce extended superblock and new raid types to support takeover/reshaping")
Signed-off-by: Alexey Simakov <bigalex934@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f34836a8dd ]
TDM channel updates were applied to all DAIs, causing configurations
to overwrite for unrelated streams. The logic is modified to update
channels only for targeted DAI. This prevents corruption of other DAI
settings and resolves audio issues observed during system suspend and
resume cycles.
Fixes: 12229b7e50 ("ASoC: amd: acp: Add TDM support for acp i2s stream")
Signed-off-by: Hemalatha Pinnamreddy <hemalatha.pinnamreddy2@amd.com>
Signed-off-by: Raghavendra Prasad Mallela <raghavendraprasad.mallela@amd.com>
Link: https://patch.msgid.link/20251203120136.2591395-1-raghavendraprasad.mallela@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59e25ef2b4 ]
blk_mq_{add,del}_queue_tag_set() functions add and remove queues from
tagset, the functions make sure that tagset and queues are marked as
shared when two or more queues are attached to the same tagset.
Initially a tagset starts as unshared and when the number of added
queues reaches two, blk_mq_add_queue_tag_set() marks it as shared along
with all the queues attached to it. When the number of attached queues
drops to 1 blk_mq_del_queue_tag_set() need to mark both the tagset and
the remaining queues as unshared.
Both functions need to freeze current queues in tagset before setting on
unsetting BLK_MQ_F_TAG_QUEUE_SHARED flag. While doing so, both functions
hold set->tag_list_lock mutex, which makes sense as we do not want
queues to be added or deleted in the process. This used to work fine
until commit 98d81f0df7 ("nvme: use blk_mq_[un]quiesce_tagset")
made the nvme driver quiesce tagset instead of quiscing individual
queues. blk_mq_quiesce_tagset() does the job and quiesce the queues in
set->tag_list while holding set->tag_list_lock also.
This results in deadlock between two threads with these stacktraces:
__schedule+0x47c/0xbb0
? timerqueue_add+0x66/0xb0
schedule+0x1c/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.constprop.0+0x271/0x600
blk_mq_quiesce_tagset+0x25/0xc0
nvme_dev_disable+0x9c/0x250
nvme_timeout+0x1fc/0x520
blk_mq_handle_expired+0x5c/0x90
bt_iter+0x7e/0x90
blk_mq_queue_tag_busy_iter+0x27e/0x550
? __blk_mq_complete_request_remote+0x10/0x10
? __blk_mq_complete_request_remote+0x10/0x10
? __call_rcu_common.constprop.0+0x1c0/0x210
blk_mq_timeout_work+0x12d/0x170
process_one_work+0x12e/0x2d0
worker_thread+0x288/0x3a0
? rescuer_thread+0x480/0x480
kthread+0xb8/0xe0
? kthread_park+0x80/0x80
ret_from_fork+0x2d/0x50
? kthread_park+0x80/0x80
ret_from_fork_asm+0x11/0x20
__schedule+0x47c/0xbb0
? xas_find+0x161/0x1a0
schedule+0x1c/0xa0
blk_mq_freeze_queue_wait+0x3d/0x70
? destroy_sched_domains_rcu+0x30/0x30
blk_mq_update_tag_set_shared+0x44/0x80
blk_mq_exit_queue+0x141/0x150
del_gendisk+0x25a/0x2d0
nvme_ns_remove+0xc9/0x170
nvme_remove_namespaces+0xc7/0x100
nvme_remove+0x62/0x150
pci_device_remove+0x23/0x60
device_release_driver_internal+0x159/0x200
unbind_store+0x99/0xa0
kernfs_fop_write_iter+0x112/0x1e0
vfs_write+0x2b1/0x3d0
ksys_write+0x4e/0xb0
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
The top stacktrace is showing nvme_timeout() called to handle nvme
command timeout. timeout handler is trying to disable the controller and
as a first step, it needs to blk_mq_quiesce_tagset() to tell blk-mq not
to call queue callback handlers. The thread is stuck waiting for
set->tag_list_lock as it tries to walk the queues in set->tag_list.
The lock is held by the second thread in the bottom stack which is
waiting for one of queues to be frozen. The queue usage counter will
drop to zero after nvme_timeout() finishes, and this will not happen
because the thread will wait for this mutex forever.
Given that [un]quiescing queue is an operation that does not need to
sleep, update blk_mq_[un]quiesce_tagset() to use RCU instead of taking
set->tag_list_lock, update blk_mq_{add,del}_queue_tag_set() to use RCU
safe list operations. Also, delete INIT_LIST_HEAD(&q->tag_set_list)
in blk_mq_del_queue_tag_set() because we can not re-initialize it while
the list is being traversed under RCU. The deleted queue will not be
added/deleted to/from a tagset and it will be freed in blk_free_queue()
after the end of RCU grace period.
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Fixes: 98d81f0df7 ("nvme: use blk_mq_[un]quiesce_tagset")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9ff39f940 ]
Pull struct drm_mode_fb_cmd2 initialization out of the driver dependent
code into shared display code.
v2: Rebase on xe stride alignment change
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/e922e47bfd39f9c5777f869ff23c23309ebbb380.1758184771.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Stable-dep-of: 460b317203 ("drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6979d2c80c ]
It's sketchy to pass error pointers via to_intel_framebuffer(). It
probably works as long as struct intel_framebuffer embeds struct
drm_framebuffer at offset 0, but be explicit about it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/17631db227d527d6c67f5d6b67adec1ff8dc6f8d.1758184771.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Stable-dep-of: 460b317203 ("drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a36b339a1 ]
For reasons unknown, xe uses XE_PAGE_SIZE alignment for
stride. Presumably it's just a confusion between stride alignment and bo
allocation size alignment. Switch to 64 byte alignment to, uh, align
with i915.
This will also be helpful in deduplicating and unifying the xe and i915
framebuffer allocation.
Link: https://lore.kernel.org/r/aLqsC87Ol_zCXOkN@intel.com
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/7f4972104de8b179d5724ae83892ee294d3f3fd3.1758184771.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Stable-dep-of: 460b317203 ("drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edb924a721 ]
In the inline assembly inside load_unaligned_zeropad(), the "addr" is
constrained as input-only operand. The compiler assumes that on exit
from the asm statement these operands contain the same values as they
had before executing the statement, but when kernel page fault happened, the assembly fixup code "bic %2 %2, #0x3" modify the value of "addr", which may lead to an unexpected behavior.
Use a temporary variable "tmp" to handle it, instead of modifying the
input-only operand, just like what arm64's load_unaligned_zeropad()
does.
Fixes: b9a50f7490 ("ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs")
Co-developed-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Liyuan Pang <pangliyuan1@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 298e753880 ]
In the DSP event handling code, a put_user() loop copies event data.
When the user buffer size is not aligned to 4 bytes, it could overwrite
beyond the buffer boundary.
Fix by adding a bounds check before put_user().
Suggested-by: Takashi Iwai <tiwai@suse.de>
Fixes: 634ec0b290 ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB788112C72AF8A1C8C448B4B8AFA3A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1220e47e4 ]
The function ioremap() in gamecube_rtc_read_offset_from_sram() can fail
and return NULL, which is dereferenced without checking, leading to a
NULL pointer dereference.
Add a check for the return value of ioremap() and return -ENOMEM on
failure.
Fixes: 86559400b3 ("rtc: gamecube: Add a RTC driver for the GameCube, Wii and Wii U")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Link Mauve <kernel@linkmauve.fr>
Link: https://patch.msgid.link/20251126080625.1752-1-vulab@iscas.ac.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf2084a7b1 ]
When split svm ranges that have been mapped using huge page should use huge
page size(2MB) to check split range alignment, not prange->granularity that
means migration granularity.
Fixes: 7ef6b2d4b7 ("drm/amdkfd: remap unaligned svm ranges that have split")
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 448ee45353)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 463d439bec ]
atomic_pool_expand iteratively tries the allocation while decrementing
the page order. There is no need to issue a warning if an attempted
allocation fails.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Fixes: d7e673ec2c ("dma-pool: Only allocate from CMA when in same memory zone")
[mszyprow: fixed typo]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251202152810.142370-1-dave.kleikamp@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25faa53646 ]
This commit addresses two issues causing i2c detect to fail.
The identified issues are:
1. Incorrect error handling for BED (Bus Error No ACK/NAK):
Before this commit, Both ALD (Arbitration Loss Detected) and
BED returned -EAGAIN.
2. Missing interrupt status clear after initialization in xfer():
On the K1 SoC, simply fixing the first issue changed the error
from -EAGAIN to -ETIMEOUT. Through tracing, it was determined that
this is likely due to MSD (Master Stop Detected) latency issues.
That means the MSD bit in the ISR may still be set on the next transfer.
As a result, the controller won't work — we can see from the scope that
it doesn't issue any signal.
(This only occurs during rapid consecutive I2C transfers.
That explains why the issue only shows up with i2cdetect.)
With these two fixes, i2c device detection now functions correctly on the K1 SoC.
Fixes: 5ea558473f ("i2c: spacemit: add support for SpacemiT K1 SoC")
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251113-fix-k1-detect-failure-v2-1-b02a9a74f65a@linux.spacemit.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd44d4d0c5 ]
Selecting OF_GPIO is generally not allowed, it always gets enabled
when both GPIOLIB and OF are turned on.
The tb10x driver now warns about this after it was enabled for
compile-testing:
WARNING: unmet direct dependencies detected for OF_GPIO
Depends on [n]: GPIOLIB [=y] && OF [=n] && HAS_IOMEM [=y]
Selected by [y]:
- GPIO_TB10X [=y] && GPIOLIB [=y] && HAS_IOMEM [=y] && (ARC_PLAT_TB10X || COMPILE_TEST [=y])
OF_GPIO is not required for compile-testing and is already enabled
when the driver is usable, so just drop the 'select' line.
Fixes: 682fbb18e1 ("gpio: tb10x: allow building the module with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20251205095429.1291866-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b873de2c0 ]
struct nfs_local_kiocb used ____cacheline_aligned on its iters[] array
and as the structure evolved it caused a 61 byte hole to form. Fix
this by removing ____cacheline_aligned and reordering iters[] before
iter_is_dio_aligned[].
Fixes: 6a218b9c31 ("nfs/localio: do not issue misaligned DIO out-of-order")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f50d0328d0 ]
This check to ensure dio_offset_align isn't larger than PAGE_SIZE is
no longer relevant (older iterations of NFS Direct was allocating
misaligned head and tail pages but no longer does, so this check isn't
needed).
Fixes: c817248fc8 ("nfs/localio: add proper O_DIRECT support for READ and WRITE")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ae4dde6f3 ]
If a DIO read or an unbuffered read request extends beyond the EOF, the
server will return a short read and a status code indicating that EOF was
hit, which gets translated to -ENODATA. Note that the client does not cap
the request at i_size, but asks for the amount requested in case there's a
race on the server with a third party.
Now, on the client side, the request will get split into multiple
subrequests if rsize is smaller than the full request size. A subrequest
that starts before or at the EOF and returns short data up to the EOF will
be correctly handled, with the NETFS_SREQ_HIT_EOF flag being set,
indicating to netfslib that we can't read more.
If a subrequest, however, starts after the EOF and not at it, HIT_EOF will
not be flagged, its error will be set to -ENODATA and it will be abandoned.
This will cause the request as a whole to fail with -ENODATA.
Fix this by setting NETFS_SREQ_HIT_EOF on any subrequest that lies beyond
the EOF marker.
Fixes: 1da29f2c39 ("netfs, cifs: Fix handling of short DIO read")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d85ac939d ]
If a DIO read or an unbuffered read request extends beyond the EOF, the
server will return a short read and a status code indicating that EOF was
hit, which gets translated to -ENODATA. Note that the client does not cap
the request at i_size, but asks for the amount requested in case there's a
race on the server with a third party.
Now, on the client side, the request will get split into multiple
subrequests if rsize is smaller than the full request size. A subrequest
that starts before or at the EOF and returns short data up to the EOF will
be correctly handled, with the NETFS_SREQ_HIT_EOF flag being set,
indicating to netfslib that we can't read more.
If a subrequest, however, starts after the EOF and not at it, HIT_EOF will
not be flagged, its error will be set to -ENODATA and it will be abandoned.
This will cause the request as a whole to fail with -ENODATA.
Fix this by setting NETFS_SREQ_HIT_EOF on any subrequest that lies beyond
the EOF marker.
This can be reproduced by mounting with "cache=none,sign,vers=1.0" and
doing a read of a file that's significantly bigger than the size of the
file (e.g. attempting to read 64KiB from a 16KiB file).
Fixes: a68c74865f ("cifs: Fix SMB1 readv/writev callback in the same way as SMB2/3")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bdc2c0e12 ]
strcpy() has been deprecated because it performs no bounds checking on the
destination buffer, which can lead to buffer overflows. Use the safer
strscpy() instead.
Signed-off-by: Madhur Kumar <madhurkumar004@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Fixes: 15a996bbb6 ("drm/nouveau: assign fence_chan->name correctly")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251204120822.17502-1-madhurkumar004@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 210d77cca3 ]
The DSP event handling code in hwdep_read() could write more bytes to
the user buffer than requested, when a user provides a buffer smaller
than the event header size (8 bytes).
Fix by using min_t() to clamp the copy size, This ensures we never copy
more than the user requested.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 634ec0b290 ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB78810656377E79E58350D951AFD9A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79a45ddcdb ]
In order to simplify ownership rules for enable GPIOs supplied by drivers
regulator_register() always takes ownership of them, even if it ends up
failing for some other reason. We therefore should not free the GPIO if
registration fails but just let the core worry about things.
Fixes: 636f4618b1 (regulator: fixed: fix GPIO descriptor leak on register failure)
Reported-by: Diederik de Haas <diederik@cknow-tech.com>
Closes: https://lore.kernel.org/r/DEPEYUF5BRGY.UKFBWRRE8HNP@cknow-tech.com
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20251204-regulator-fixed-fix-gpiod-leak-v1-1-48efea5b82c2@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 479acb9db3 ]
The drm_property_create_signed_range() function doesn't return error
pointers it returns NULL on error. Fix the error checking to match.
Fixes: 8f7179a102 ("drm/atomic: Add support for mouse hotspots")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/aTB023cfcIPkCsFS@stanley.mountain
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78385c7299 ]
The struct io_uring_buf elements in a buffer ring are in a memory region
accessible from userspace. A malicious/buggy userspace program could
therefore write to them at any time, so they should be accessed with
READ_ONCE() in the kernel. Commit 98b6fa62c8 ("io_uring/kbuf: always
use READ_ONCE() to read ring provided buffer lengths") already switched
the reads of the len field to READ_ONCE(). Do the same for bid and addr.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: c7fb19428d ("io_uring: add support for ring mapped supplied buffers")
Cc: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb9f4cca7c ]
Memory allocated by kvcalloc() may come from vmalloc or kmalloc,
so use kvfree() instead of kfree() for proper deallocation.
Fixes: aa36d711e9 ("nvme-auth: convert dhchap_auth_list to an array")
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7e3f852a4 ]
Move the fatal signal check before bio_alloc() to prevent a memory
leak when BLKDEV_ZERO_KILLABLE is set and a fatal signal is pending.
Previously, the bio was allocated before checking for a fatal signal.
If a signal was pending, the code would break out of the loop without
freeing or chaining the just-allocated bio, causing a memory leak.
This matches the pattern already used in __blkdev_issue_write_zeroes()
where the signal check precedes the allocation.
Fixes: bf86bcdb40 ("blk-lib: check for kill signal in ioctl BLKZEROOUT")
Reported-by: syzbot+527a7e48a3d3d315d862@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=527a7e48a3d3d315d862
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: syzbot+527a7e48a3d3d315d862@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a32282175 ]
REQ_OP_ZONE_RESET_ALL is a zone management request, and op_is_zone_mgmt()
has returned true for it.
Update the comment to remove the misleading exception note so
the documentation matches the implementation.
Fixes: 12a1c9353c ("block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL")
Signed-off-by: shechenglong <shechenglong@xfusion.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a7a7b80a2 ]
A cleanup patch apparently by accident used a local device structure
instead of a pointer to one in the nt35560_read_id() function, causing
a warning about stack usage:
drivers/gpu/drm/panel/panel-novatek-nt35560.c: In function 'nt35560_read_id':
drivers/gpu/drm/panel/panel-novatek-nt35560.c:249:1: error: the frame size of 1296 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Change this to a pointer as was liley intended here.
Fixes: 5fbc0dbb92 ("drm/panel: novatek-nt35560: Clean up driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251204094550.1030506-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c196bf43d7 ]
During system suspend, wakeup capable IRQs for block device can be
delayed, which can cause blk_mq_hctx_notify_offline() to hang
indefinitely while waiting for pending request to complete.
Skip the request waiting loop and abort suspend when wakeup events are
pending to prevent the deadlock.
Fixes: bf0beec060 ("blk-mq: drain I/O when all CPUs in a hctx are offline")
Signed-off-by: Cong Zhang <cong.zhang@oss.qualcomm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ee8bc3942 ]
The recent increase in the number of Segment Summary Area (SSA) entries
from 512 to 2048 was an unintentional change in logic of 16kb block
support. This commit corrects the issue.
To better utilize the space available from the erroneous 2048-entry
calculation, we are implementing a solution to share the currently
unused SSA space with neighboring segments. This enhances overall
SSA utilization without impacting the established 8MB segment size.
Fixes: d7e9a9037d ("f2fs: Support Block Size == Page Size")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ee257aba1 ]
Audio fails to resume after system exits suspend mode
due to accessing incorrect ring buffer address during
resume. This patch resolves issue by selecting correct
address based on the ACP version.
Fixes: f6f7d25b11 ("ASoC: amd: acp: Add pte configuration for ACP7.0 platform")
Signed-off-by: Hemalatha Pinnamreddy <hemalatha.pinnamreddy2@amd.com>
Signed-off-by: Raghavendra Prasad Mallela <raghavendraprasad.mallela@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251203064650.2554625-1-raghavendraprasad.mallela@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ebbd45c33 ]
bcm63xx_soc_pcm_new() does not check the return value of
of_dma_configure(), which may fail with -EPROBE_DEFER or
other errors, allowing PCM setup to continue with incomplete
DMA configuration.
Add error checking for of_dma_configure() and return on failure.
Fixes: 88eb404ccc ("ASoC: brcm: Add DSL/PON SoC audio driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251202101642.492-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccb61a3283 ]
kbd_led_set() can sleep, and so may not be used as the brightness_set()
callback.
Otherwise using this led with a trigger leads to system hangs
accompanied by:
BUG: scheduling while atomic: acpi_fakekeyd/2588/0x00000003
CPU: 4 UID: 0 PID: 2588 Comm: acpi_fakekeyd Not tainted 6.17.9+deb14-amd64 #1 PREEMPT(lazy) Debian 6.17.9-1
Hardware name: ASUSTeK COMPUTER INC. ASUS EXPERTBOOK B9403CVAR/B9403CVAR, BIOS B9403CVAR.311 12/24/2024
Call Trace:
<TASK>
[...]
schedule_timeout+0xbd/0x100
__down_common+0x175/0x290
down_timeout+0x67/0x70
acpi_os_wait_semaphore+0x57/0x90
[...]
asus_wmi_evaluate_method3+0x87/0x190 [asus_wmi]
led_trigger_event+0x3f/0x60
[...]
Fixes: 9fe44fc98c ("platform/x86: asus-wmi: Simplify the keyboard brightness updating process")
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20251129101307.18085-3-anton@khirnov.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c36f9d7b28 ]
After commit 25524b6190 ("fs/nls: Fix utf16 to utf8 conversion"),
the return values of utf8_to_utf32() and utf32_to_utf8() are
inconsistent when encountering an error: utf8_to_utf32() returns -1,
while utf32_to_utf8() returns errno codes. Fix this inconsistency
by modifying utf8_to_utf32() to return errno codes as well.
Fixes: 25524b6190 ("fs/nls: Fix utf16 to utf8 conversion")
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251129111535.8984-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
