[ Upstream commit 8d158f47f1 ]
In some cases, it is possible for pble_rsrc->next_fpm_addr to be
larger than u32, so remove the u32 cast to avoid unintentional
truncation.
This fixes the following error that can be observed when registering
massive memory regions:
[ 447.227494] (NULL ib_device): cqp opcode = 0x1f maj_err_code = 0xffff min_err_code = 0x800c
[ 447.227505] (NULL ib_device): [Update PE SDs Cmd Error][op_code=21] status=-5 waiting=1 completion_err=1 maj=0xffff min=0x800c
Fixes: e8c4dbc2fc ("RDMA/irdma: Add PBLE resource manager")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20250923190850.1022773-1-jmoroni@google.com
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 761dc71c60 ]
All the 3 major C compilers (MSVC, GCC, LLVM/Clang) warn about
the unused variable i after the removal of its usage by PR #1031
addressing Issue #1027
Link: 6d235320
Signed-off-by: Saket Dumbre <saket.dumbre@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db291ed173 ]
[Why]
DP validation may fail with multiple displays and higher color depths.
The sink may support others though.
[How]
When DP bandwidth validation fails, progressively fallback through:
- YUV422 8bpc (bandwidth efficient)
- YUV422 6bpc (reduced color depth)
- YUV420 (last resort)
This resolves cases where displays would show no image due to insufficient
DP link bandwidth for the requested RGB mode.
Suggested-by: Mauri Carvalho <mcarvalho3@lenovo.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31b636d2c4 ]
When this was first reported [1], the possibility of having sufficient
number of dynamic misc devices was theoretical, in the case of dlm driver.
In practice, its userspace never created more than one device.
What we know from commit ab760791c0 ("char: misc: Increase the maximum
number of dynamic misc devices to 1048448"), is that the miscdevice
interface has been used for allocating more than the single-shot devices it
was designed for. And it is not only coresight_tmc, but many other drivers
are able to create multiple devices.
On systems like the ones described in the above commit, it is certain that
the dynamic allocation will allocate certain reserved minor numbers,
leading to failures when a later driver tries to claim its reserved number.
Instead of excluding the historically statically allocated range from
dynamic allocation, restrict the latter to minors above 255. That also
removes the need for DYNAMIC_MINORS and the convolution in allocating minor
numbers, simplifying the code.
Since commit ab760791c0 ("char: misc: Increase the maximum number of
dynamic misc devices to 1048448") has been applied, such range is already
possible. And given such devices already need to be dynamically created,
there should be no systems where this might become a problem.
[1] https://lore.kernel.org/all/1257813017-28598-3-git-send-email-cascardo@holoscopio.com/
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20250423-misc-dynrange-v4-1-133b5ae4ca18@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8607edcd17 ]
A recent change to hide USB3 root hubs of USB2-only controllers broke
registration of USB2 root hubs - allow_single_roothub is set too late,
and by this time xhci_run() has already deferred root hub registration
until after the shared HCD is added, which will never happen.
This makes such controllers unusable, but testers didn't notice since
they were only bothered by warnings about empty USB3 root hubs. The bug
causes problems to other people who actually use such HCs and I was
able to confirm it on an ordinary HC by patching to ignore USB3 ports.
Setting allow_single_roothub during early setup fixes things.
Reported-by: Arisa Snowbell <arisa.snowbell@gmail.com>
Closes: https://lore.kernel.org/linux-usb/CABpa4MA9unucCoKtSdzJyOLjHNVy+Cwgz5AnAxPkKw6vuox1Nw@mail.gmail.com/
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/linux-usb/lnb5bum7dnzkn3fc7gq6hwigslebo7o4ccflcvsc3lvdgnu7el@fvqpobbdoapl/
Fixes: 719de070f7 ("usb: xhci-pci: add support for hosts with zero USB3 ports")
Tested-by: Arisa Snowbell <arisa.snowbell@gmail.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b4cbcf6b ]
Currently when both IMA and EVM are in fix mode, the IMA signature will
be reset to IMA hash if a program first stores IMA signature in
security.ima and then writes/removes some other security xattr for the
file.
For example, on Fedora, after booting the kernel with "ima_appraise=fix
evm=fix ima_policy=appraise_tcb" and installing rpm-plugin-ima,
installing/reinstalling a package will not make good reference IMA
signature generated. Instead IMA hash is generated,
# getfattr -m - -d -e hex /usr/bin/bash
# file: usr/bin/bash
security.ima=0x0404...
This happens because when setting security.selinux, the IMA_DIGSIG flag
that had been set early was cleared. As a result, IMA hash is generated
when the file is closed.
Similarly, IMA signature can be cleared on file close after removing
security xattr like security.evm or setting/removing ACL.
Prevent replacing the IMA file signature with a file hash, by preventing
the IMA_DIGSIG flag from being reset.
Here's a minimal C reproducer which sets security.selinux as the last
step which can also replaced by removing security.evm or setting ACL,
#include <stdio.h>
#include <sys/xattr.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <stdlib.h>
int main() {
const char* file_path = "/usr/sbin/test_binary";
const char* hex_string = "030204d33204490066306402304";
int length = strlen(hex_string);
char* ima_attr_value;
int fd;
fd = open(file_path, O_WRONLY|O_CREAT|O_EXCL, 0644);
if (fd == -1) {
perror("Error opening file");
return 1;
}
ima_attr_value = (char*)malloc(length / 2 );
for (int i = 0, j = 0; i < length; i += 2, j++) {
sscanf(hex_string + i, "%2hhx", &ima_attr_value[j]);
}
if (fsetxattr(fd, "security.ima", ima_attr_value, length/2, 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
const char* selinux_value= "system_u:object_r:bin_t:s0";
if (fsetxattr(fd, "security.selinux", selinux_value, strlen(selinux_value), 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
close(fd);
return 0;
}
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00be6f26a2 ]
When io_uring is used in the same task as CIFS, there might be
unnecessary reconnects, causing issues in user-space applications
like QEMU with a log like:
> CIFS: VFS: \\10.10.100.81 Error -512 sending data on socket to server
Certain io_uring completions might be added to task_work with
notify_method being TWA_SIGNAL and thus TIF_NOTIFY_SIGNAL is set for
the task.
In __smb_send_rqst(), signals are masked before calling
smb_send_kvec(), but the masking does not apply to TIF_NOTIFY_SIGNAL.
If sk_stream_wait_memory() is reached via sock_sendmsg() while
TIF_NOTIFY_SIGNAL is set, signal_pending(current) will evaluate to
true there, and -EINTR will be propagated all the way from
sk_stream_wait_memory() to sock_sendmsg() in smb_send_kvec().
Afterwards, __smb_send_rqst() will see that not everything was written
and reconnect.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3677ca67b9 ]
we should use sock_create_kern() if the socket resides in kernel space.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4099b98203 ]
A soft lockup was observed when loading amdgpu module.
If a module has a lot of tracable functions, multiple calls
to kallsyms_lookup can spend too much time in RCU critical
section and with disabled preemption, causing kernel panic.
This is the same issue that was fixed in
commit d0b24b4e91 ("ftrace: Prevent RCU stall on PREEMPT_VOLUNTARY
kernels") and commit 42ea22e754 ("ftrace: Add cond_resched() to
ftrace_graph_set_hash()").
Fix it the same way by adding cond_resched() in ftrace_module_enable.
Link: https://lore.kernel.org/aMQD9_lxYmphT-up@vova-pc
Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 025e880759 ]
Willy Tarreau <w@1wt.eu> forwarded me a message from
Disclosure <disclosure@aisle.com> with the following
warning:
> The helper `xattr_key()` uses the pointer variable in the loop condition
> rather than dereferencing it. As `key` is incremented, it remains non-NULL
> (until it runs into unmapped memory), so the loop does not terminate on
> valid C strings and will walk memory indefinitely, consuming CPU or hanging
> the thread.
I easily reproduced this with setfattr and getfattr, causing a kernel
oops, hung user processes and corrupted orangefs files. Disclosure
sent along a diff (not a patch) with a suggested fix, which I based
this patch on.
After xattr_key started working right, xfstest generic/069 exposed an
xattr related memory leak that lead to OOM. xattr_key returns
a hashed key. When adding xattrs to the orangefs xattr cache, orangefs
used hash_add, a kernel hashing macro. hash_add also hashes the key using
hash_log which resulted in additions to the xattr cache going to the wrong
hash bucket. generic/069 tortures a single file and orangefs does a
getattr for the xattr "security.capability" every time. Orangefs
negative caches on xattrs which includes a kmalloc. Since adds to the
xattr cache were going to the wrong bucket, every getattr for
"security.capability" resulted in another kmalloc, none of which were
ever freed.
I changed the two uses of hash_add to hlist_add_head instead
and the memory leak ceased and generic/069 quit throwing furniture.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Reported-by: Stanislav Fort of Aisle Research <stanislav.fort@aisle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1b501a8c6 ]
page_pool_init() returns E2BIG when the page_pool size goes above 32K
pages. As some drivers are configuring the page_pool size according to
the MTU and ring size, there are cases where this limit is exceeded and
the queue creation fails.
The page_pool size doesn't have to cover a full queue, especially for
larger ring size. So clamp the size instead of returning an error. Do
this in the core to avoid having each driver do the clamping.
The current limit was deemed to high [1] so it was reduced to 16K to avoid
page waste.
[1] https://lore.kernel.org/all/1758532715-820422-3-git-send-email-tariqt@nvidia.com/
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250926131605.2276734-2-dtatulea@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38b04ed707 ]
The TTY layer already serializes line discipline operations with
tty->ldisc_sem, so the extra disc_data_lock and refcnt in 6pack
are unnecessary.
Removing them simplifies the code and also resolves a lockdep warning
reported by syzbot. The warning did not indicate a real deadlock, since
the write-side lock was only taken in process context with hardirqs
disabled.
Reported-by: syzbot+5fd749c74105b0e1b302@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68c858b0.050a0220.3c6139.0d1c.GAE@google.com/
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20250925051059.26876-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79c1587b6c ]
syzbot created an exfat image with cluster bits not set for the allocation
bitmap. exfat-fs reads and uses the allocation bitmap without checking
this. The problem is that if the start cluster of the allocation bitmap
is 6, cluster 6 can be allocated when creating a directory with mkdir.
exfat zeros out this cluster in exfat_mkdir, which can delete existing
entries. This can reallocate the allocated entries. In addition,
the allocation bitmap is also zeroed out, so cluster 6 can be reallocated.
This patch adds exfat_test_bitmap_range to validate that clusters used for
the allocation bitmap are correctly marked as in-use.
Reported-by: syzbot+a725ab460fc1def9896f@syzkaller.appspotmail.com
Tested-by: syzbot+a725ab460fc1def9896f@syzkaller.appspotmail.com
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dfba10838 ]
For exFAT filesystems with 4MB read_ahead_size, removing the storage device
when the read operation is in progress, which cause the last read syscall
spent 150s [1]. The main reason is that exFAT generates excessive log
messages [2].
After applying this patch, approximately 300,000 lines of log messages
were suppressed, and the delay of the last read() syscall was reduced
to about 4 seconds.
[1]:
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000120>
read(4, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000032>
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000119>
read(4, 0x7fccf28ae000, 131072) = -1 EIO (Input/output error) <150.186215>
[2]:
[ 333.696603] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
[ 333.697378] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
[ 333.698156] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ce48d4974 ]
Drop those frames causing Head-of-Line Blocking due to Scheduling
(HLBS) error to avoid HLBS interrupt flooding and netdev watchdog
timeouts due to blocked packets. Tx queues can be configured to drop
those blocked packets by setting Drop Frames causing Scheduling Error
(DFBS) bit of EST_CONTROL register.
Also, add per queue HLBS drop count.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20250925-hlbs_2-v3-1-3b39472776c2@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 659169c4eb ]
The 1824c does not have the A/B switch that the 1810c has,
but instead it has a mono main switch that sums the two
main output channels to mono.
Signed-off-by: Roy Vegard Ovesen <roy.vegard.ovesen@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca94b2b036 ]
Currently, bcsp_recv() can be called even when the BCSP protocol has not
been registered. This leads to a NULL pointer dereference, as shown in
the following stack trace:
KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590
Call Trace:
<TASK>
hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627
tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290
tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
To prevent this, ensure that the HCI_UART_REGISTERED flag is set before
processing received data. If the protocol is not registered, return
-EUNATCH.
Reported-by: syzbot+4ed6852d4da4606c93da@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4ed6852d4da4606c93da
Tested-by: syzbot+4ed6852d4da4606c93da@syzkaller.appspotmail.com
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70a5ce8bc9 ]
bp->dev->dev_addr is of type `unsigned char *`. Casting it to a u32
pointer and dereferencing implies dealing manually with endianness,
which is error-prone.
Replace by calls to get_unaligned_le32|le16() helpers.
This was found using sparse:
⟩ make C=2 drivers/net/ethernet/cadence/macb_main.o
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] bottom
got restricted __le32 [usertype]
warning: incorrect type in assignment (different base types)
expected unsigned short [usertype] top
got restricted __le16 [usertype]
...
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-5-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b9f128947 ]
PCI devices prior to PCI 2.3 both use level interrupts and do not support
interrupt masking, leading to a failure when passed through to a KVM guest on
at least the ppc64 platform. This failure manifests as receiving and
acknowledging a single interrupt in the guest, while the device continues to
assert the level interrupt indicating a need for further servicing.
When lazy IRQ masking is used on DisINTx- (non-PCI 2.3) hardware, the following
sequence occurs:
* Level IRQ assertion on device
* IRQ marked disabled in kernel
* Host interrupt handler exits without clearing the interrupt on the device
* Eventfd is delivered to userspace
* Guest processes IRQ and clears device interrupt
* Device de-asserts INTx, then re-asserts INTx while the interrupt is masked
* Newly asserted interrupt acknowledged by kernel VMM without being handled
* Software mask removed by VFIO driver
* Device INTx still asserted, host controller does not see new edge after EOI
The behavior is now platform-dependent. Some platforms (amd64) will continue
to spew IRQs for as long as the INTX line remains asserted, therefore the IRQ
will be handled by the host as soon as the mask is dropped. Others (ppc64) will
only send the one request, and if it is not handled no further interrupts will
be sent. The former behavior theoretically leaves the system vulnerable to
interrupt storm, and the latter will result in the device stalling after
receiving exactly one interrupt in the guest.
Work around this by disabling lazy IRQ masking for DisINTx- INTx devices.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Link: https://lore.kernel.org/r/333803015.1744464.1758647073336.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4215d1cf59 ]
The RPMI System MSI interrupt controller (just like PLIC and APLIC)
needs to probed prior to devices like GED which use interrupts provided
by it. Also, it has dependency on the SBI MPXY mailbox device.
Add HIDs of RPMI System MSI and SBI MPXY mailbox devices to the honor
list so that those dependencies are handled.
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Link: https://lore.kernel.org/r/20250818040920.272664-17-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 733a763dd8 ]
The problem of having class-D initialization sequence in probe using
regmap_register_patch() is that it will do hardware register writes
immediately after being called as it bypasses regcache. Afterwards, in
aic3x_init() we also perform codec soft reset, rendering class-D init
sequence pointless. This issue is even more apparent when using reset
GPIO line, since in that case class-D amplifier initialization fails
with "Failed to init class D: -5" message as codec is already held in
reset state after requesting the reset GPIO and hence hardware I/O
fails with -EIO errno.
Thus move class-D amplifier initialization sequence from probe function
to aic3x_set_power() just before the usual regcache sync. Use bypassed
regmap_multi_reg_write_bypassed() function to make sure, class-D init
sequence is performed in proper order as described in the datasheet.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Link: https://patch.msgid.link/20250925085929.2581749-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27fa1a8b28 ]
The mclk direction now needs to be specified in endpoint node with
"system-clock-direction-out" property. However some calls to the
set_sysclk callback, related to CPU DAI clock, result in unbalanced
calls to clock API.
The set_sysclk callback in STM32 SAI driver is intended only for mclk
management. So it is relevant to ensure that calls to set_sysclk are
related to mclk only.
Since the master clock is handled only at runtime, skip the calls to
set_sysclk in the initialization phase.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20250916123118.84175-1-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46e75c56df ]
The following code paths may result in high latency or even task hangs:
1. fastcommit io is throttled by wbt.
2. jbd2_fc_wait_bufs() might wait for a long time while
JBD2_FAST_COMMIT_ONGOING is set in journal->flags, and then
jbd2_journal_commit_transaction() waits for the
JBD2_FAST_COMMIT_ONGOING bit for a long time while holding the write
lock of j_state_lock.
3. start_this_handle() waits for read lock of j_state_lock which
results in high latency or task hang.
Given the fact that ext4_fc_commit() already modifies the current
process' IO priority to match that of the jbd2 thread, it should be
reasonable to match jbd2's IO submission flags as well.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250827121812.1477634-1-sunjunchao@bytedance.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1534f72dc2 ]
The parent function ext4_xattr_inode_lookup_create already uses GFP_NOFS for memory alloction, so the function ext4_xattr_inode_cache_find should use same gfp_flag.
Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 513024d5a0 ]
When IOMMU is enabled, dma_alloc_coherent() with GFP_USER may return
addresses from the vmalloc range. If such an address is mapped without
VM_MIXEDMAP, vm_insert_page() will trigger a BUG_ON due to the
VM_PFNMAP restriction.
Fix this by checking for vmalloc addresses and setting VM_MIXEDMAP
in the VMA before mapping. This ensures safe mapping and avoids kernel
crashes. The memory is still driver-allocated and cannot be accessed
directly by userspace.
Signed-off-by: Moti Haimovski <moti.haimovski@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0d866bab1 ]
Dirty state can occur when the host VM undergoes a reset while the
device does not. In such a case, the driver must reset the device before
it can be used again. As part of this reset, the device capabilities
are zeroed. Therefore, the driver must read the Preboot status again to
learn the Preboot state, capabilities, and security configuration.
Signed-off-by: Konstantin Sinyuk <konstantin.sinyuk@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f5067531c ]
EFAULT is currently returned if less than requested user pages are
pinned. This value means a "bad address" which might be confusing to
the user, as the address of the given user memory is not necessarily
"bad".
Modify the return value to ENOMEM, as "out of memory" is more suitable
in this case.
Signed-off-by: Tomer Tayar <tomer.tayar@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4be7599d6b ]
Add handling for MPI26_SAS_NEG_LINK_RATE_22_5 in
_transport_convert_phy_link_rate(). This maps the new 22.5 Gbps
negotiated rate to SAS_LINK_RATE_22_5_GBPS, to get correct PHY link
speeds.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Message-Id: <20250922095113.281484-4-ranjan.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4fd8e56c9 ]
Change the BMON_CR register value back to its original state before
enabling, so that BMON does not continue to collect information
after being disabled.
Signed-off-by: Vered Yavniely <vered.yavniely@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 072fdd4b0b ]
The fc_ct_ms_fill() helper currently formats the OS name and version
into entry->value using "%s v%s". Since init_utsname()->sysname and
->release are unbounded strings, snprintf() may attempt to write more
than FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN bytes, triggering a
-Wformat-truncation warning with W=1.
In file included from drivers/scsi/libfc/fc_elsct.c:18:
drivers/scsi/libfc/fc_encode.h: In function ‘fc_ct_ms_fill.constprop’:
drivers/scsi/libfc/fc_encode.h:359:30: error: ‘%s’ directive output may
be truncated writing up to 64 bytes into a region of size between 62
and 126 [-Werror=format-truncation=]
359 | "%s v%s",
| ^~
360 | init_utsname()->sysname,
361 | init_utsname()->release);
| ~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/libfc/fc_encode.h:357:17: note: ‘snprintf’ output between
3 and 131 bytes into a destination of size 128
357 | snprintf((char *)&entry->value,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
358 | FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
359 | "%s v%s",
| ~~~~~~~~~
360 | init_utsname()->sysname,
| ~~~~~~~~~~~~~~~~~~~~~~~~
361 | init_utsname()->release);
| ~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by using "%.62s v%.62s", which ensures sysname and release are
truncated to fit within the 128-byte field defined by
FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN.
[mkp: clarified commit description]
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd9a9562b2 ]
Currently, after the bridge is created, the FDB does not hold an FDB entry
for the bridge MAC on VLAN 0:
# ip link add name br up type bridge
# ip -br link show dev br
br UNKNOWN 92:19:8c:4e:01:ed <BROADCAST,MULTICAST,UP,LOWER_UP>
# bridge fdb show | grep 92:19:8c:4e:01:ed
92:19:8c:4e:01:ed dev br vlan 1 master br permanent
Later when the bridge MAC is changed, or in fact when the address is given
during netdevice creation, the entry appears:
# ip link add name br up address 00:11:22:33:44:55 type bridge
# bridge fdb show | grep 00:11:22:33:44:55
00:11:22:33:44:55 dev br vlan 1 master br permanent
00:11:22:33:44:55 dev br master br permanent
However when the bridge address is set by the user to the current bridge
address before the first port is enslaved, none of the address handlers
gets invoked, because the address is not actually changed. The address is
however marked as NET_ADDR_SET. Then when a port is enslaved, the address
is not changed, because it is NET_ADDR_SET. Thus the VLAN 0 entry is not
added, and it has not been added previously either:
# ip link add name br up type bridge
# ip -br link show dev br
br UNKNOWN 7e:f0:a8:1a:be:c2 <BROADCAST,MULTICAST,UP,LOWER_UP>
# ip link set dev br addr 7e:f0:a8:1a:be:c2
# ip link add name v up type veth
# ip link set dev v master br
# ip -br link show dev br
br UNKNOWN 7e:f0:a8:1a:be:c2 <BROADCAST,MULTICAST,UP,LOWER_UP>
# bridge fdb | grep 7e:f0:a8:1a:be:c2
7e:f0:a8:1a:be:c2 dev br vlan 1 master br permanent
Then when the bridge MAC is used as DMAC, and br_handle_frame_finish()
looks up an FDB entry with VLAN=0, it doesn't find any, and floods the
traffic instead of passing it up.
Fix this by simply adding the VLAN 0 FDB entry for the bridge itself always
on netdevice creation. This also makes the behavior consistent with how
ports are treated: ports always have an FDB entry for each member VLAN as
well as VLAN 0.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/415202b2d1b9b0899479a502bbe2ba188678f192.1758550408.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a890a2e339 ]
Theoretically it's an oopsable race, but I don't believe one can manage
to hit it on real hardware; might become doable on a KVM, but it still
won't be easy to attack.
Anyway, it's easy to deal with - since xdr_encode_hyper() is just a call of
put_unaligned_be64(), we can put that under ->d_lock and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf75ad0968 ]
When client initialization goes through server trunking discovery, it
schedules the state manager and then sleeps waiting for nfs_client
initialization completion.
The state manager can fail during state recovery, and specifically in
lease establishment as nfs41_init_clientid() will bail out in case of
errors returned from nfs4_proc_create_session(), without ever marking
the client ready. The session creation can fail for a variety of reasons
e.g. during backchannel parameter negotiation, with status -EINVAL.
The error status will propagate all the way to the nfs4_state_manager
but the client status will not be marked, and thus the mount process
will remain blocked waiting.
Fix it by adding -EINVAL error handling to nfs4_state_manager().
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be390f9524 ]
RFC7530 states that clients should be prepared for the return of
NFS4ERR_GRACE errors for non-reclaim lock and I/O requests.
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51cb93aa0c ]
Don't update DC stream color components during atomic check. The driver
will continue validating the new CRTC color state but will not change DC
stream color components. The DC stream color state will only be
programmed at commit time in the `atomic_setup_commit` stage.
It fixes gamma LUT loss reported by KDE users when changing brightness
quickly or changing Display settings (such as overscan) with nightlight
on and HDR. As KWin can do a test commit with color settings different
from those that should be applied in a non-test-only commit, if the
driver changes DC stream color state in atomic check, this state can be
eventually HW programmed in commit tail, instead of the respective state
set by the non-blocking commit.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4444
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bf6b216d4 ]
[Why/How]
Call power gating routine only if it is defined.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Sridevi Arvindekar <sarvinde@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f082daf08f ]
[Why]
Driver does not pick up and save vbios's clocks during init clocks,
the dispclk in clk_mgr will keep 0 until the first update clocks.
In some cases, OS changes the timing in the second set mode
(lower the pixel clock), causing the driver to lower the dispclk
in prepare bandwidth, which is illegal and causes grey screen.
[How]
1. Dump and save the vbios's clocks, and init the dispclk in
dcn314_init_clocks.
2. Fix the condition in dcn314_update_clocks, regarding a 0kHz value.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8bedab2d9 ]
[WHY]
Ensure AVI infoframe updates from stream updates are applied to the active
stream so OS overrides are not lost.
[HOW]
Copy avi_infopacket to stream when valid flag is set.
Follow existing infopacket copy pattern and perform a basic validity check before assignment.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0b977a3d1 ]
At reset, the KSZ8463 uses a strap-based configuration to set SPI as
bus interface. SPI is the only bus supported by the driver. If the
required pull-ups/pull-downs are missing (by mistake or by design to
save power) the pins may float and the configuration can go wrong
preventing any communication with the switch.
Introduce a ksz8463_configure_straps_spi() function called during the
device reset. It relies on the 'straps-rxd-gpios' OF property and the
'reset' pinmux configuration to enforce SPI as bus interface.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20250918-ksz-strap-pins-v3-3-16662e881728@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54898664e1 ]
A remoteproc could theoretically signal handover twice. This is unexpected
and would break the reference counting for the handover resources (power
domains, clocks, regulators, etc), so add a check to prevent that from
happening.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250820-rproc-qcom-q6v5-fixes-v2-2-910b1a3aff71@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50d51cef55 ]
Quoted from musl wiki:
GNU getopt permutes argv to pull options to the front, ahead of
non-option arguments. musl and the POSIX standard getopt stop
processing options at the first non-option argument with no
permutation.
Thus these scripts stop working on musl since non-option arguments for
tools using getopt() (in this case, (ar)ping) do not always come last.
Fix it by reordering arguments.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250919053538.1106753-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 299fad4133 ]
When a device is surprise-removed (e.g., due to a dock unplug), the PCI
core unconfigures all downstream devices and sets their error state to
pci_channel_io_perm_failure. This marks them as disconnected via
pci_dev_is_disconnected().
During device removal, the runtime PM framework may attempt to resume the
device to D0 via pm_runtime_get_sync(), which calls into pci_power_up().
Since the device is already disconnected, this resume attempt is
unnecessary and results in a predictable errors like this, typically when
undocking from a TBT3 or USB4 dock with PCIe tunneling:
pci 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
Avoid powering up disconnected devices by checking their status early in
pci_power_up() and returning -EIO.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[bhelgaas: add typical message]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://patch.msgid.link/20250909031916.4143121-1-superm1@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64b9642fc2 ]
When disabling SR-IOV, clear the configuration of each VF
in the hardware. Do not exit the configuration clearing process
due to the failure of a single VF. Additionally, Clear the VF
configurations before decrementing the PM counter.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85acd1b26b ]
Before the device reset, although the driver has set the queue
status to intercept doorbells sent by the task process, the reset
thread is isolated from the user-mode task process, so the task process
may still send doorbells. Therefore, before the reset, the queue is
directly invalidated, and the device directly discards the doorbells
sent by the process.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
