[ Upstream commit f8def051bb ]
The current code uses of_iomap() to map registers but never calls
iounmap() on any error path after the mapping. This causes a memory
leak when probe fails after successful ioremap, for example when
of_clk_add_provider() or r9a06g032_add_clk_domain() fails.
Replace of_iomap() with devm_of_iomap() to automatically unmap the
region on probe failure. Update the error check accordingly to use
IS_ERR() and PTR_ERR() since devm_of_iomap() returns ERR_PTR on error.
Fixes: 4c3d88526e ("clk: renesas: Renesas R9A06G032 clock driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251030061603.1954-1-vulab@iscas.ac.cn
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64eb04ae54 ]
According to the software usage PKLXF in Arm ARM (ARM DDI 0487 L.a), a
Context synchronization event is required before enabling the trace
unit.
An ISB is added to meet this requirement, particularly for guarding the
operations in the flow:
etm4x_allow_trace()
`> kvm_tracing_set_el1_configuration()
`> write_sysreg_s(trfcr_while_in_guest, SYS_TRFCR_EL12)
Improved the barrier comments to provide more accurate information.
Fixes: 1ab3bb9df5 ("coresight: etm4x: Add necessary synchronization for sysreg access")
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Yeoreun Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-5-f55553b6c8b3@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40f682ae50 ]
The trace unit is controlled in the ETM hardware enabling and disabling.
The sequential changes for support AUX pause and resume will reuse the
same operations.
Extract the operations in the etm4_{enable|disable}_trace_unit()
functions. A minor improvement in etm4_enable_trace_unit() is for
returning the timeout error to callers.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250401180708.385396-2-leo.yan@arm.com
Stable-dep-of: 64eb04ae54 ("coresight: etm4x: Add context synchronization before enabling trace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4dc4e22f95 ]
Since commit 4ff6039ffb ("coresight-etm4x: add isb() before reading
the TRCSTATR"), the code has incorrectly been polling the PMSTABLE bit
instead of the IDLE bit.
This commit corrects the typo.
Fixes: 4ff6039ffb ("coresight-etm4x: add isb() before reading the TRCSTATR")
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-4-f55553b6c8b3@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 693d1eaca9 ]
The device mode is defined as local type. This type cannot promise
SMP-safe access.
Change to atomic type and impose relax ordering, which ensures the
SMP-safe synchronisation and the ordering between the mode setting and
relevant operations.
Fixes: 22fd532eaa ("coresight: etm3x: adding operation mode for etm_enable()")
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-1-f55553b6c8b3@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e88e86411 ]
In one of the error paths, the memory allocated for skb_rx is not freed.
Fix that by freeing it before returning.
Fixes: a910e4a94f ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20251110175316.106591-1-nihaal@cse.iitm.ac.in
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10e1c77c36 ]
Commit b96bae3ae2 ("powerpc/32: Replace ASM exception exit by C
exception exit from ppc64") erroneouly copied to powerpc/32 the logic
from powerpc/64 based on feature CPU_FTR_STCX_CHECKS_ADDRESS which is
always 0 on powerpc/32.
Re-instate the logic implemented by commit b64f87c16f ("[POWERPC]
Avoid unpaired stwcx. on some processors") which is based on
CPU_FTR_NEED_PAIRED_STWCX feature.
Fixes: b96bae3ae2 ("powerpc/32: Replace ASM exception exit by C exception exit from ppc64")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/6040b5dbcf5cdaa1cd919fcf0790f12974ea6e5a.1757666244.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7afe2383ef ]
The elfcorehdr segment in the kdump image stores information about the
memory regions (called crash memory ranges) that the kdump kernel must
capture.
When a memory hot-remove event occurs, the kernel regenerates the
elfcorehdr for the currently loaded kdump image to remove the
hot-removed memory from the crash memory ranges.
Call chain:
remove_mem_range()
update_crash_elfcorehdr()
arch_crash_handle_hotplug_event()
crash_handle_hotplug_event()
While removing the hot-removed memory from the crash memory ranges in
remove_mem_range(), if the removed memory lies within an existing crash
range, that range is split into two. During this split, the size of the
second range was being calculated incorrectly.
This leads to dump capture failure with makedumpfile with below error:
$ makedumpfile -l -d 31 /proc/vmcore /tmp/vmcore
readpage_elf: Attempt to read non-existent page at 0xbbdab0000.
readmem: type_addr: 0, addr:c000000bbdab7f00, size:16
validate_mem_section: Can't read mem_section array.
readpage_elf: Attempt to read non-existent page at 0xbbdab0000.
readmem: type_addr: 0, addr:c000000bbdab7f00, size:8
get_mm_sparsemem: Can't get the address of mem_section.
The updated crash memory range in PT_LOAD entry is holding incorrect
data (checkout FileSiz and MemSiz):
readelf -a /proc/vmcore
<snip...>
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000b013d0000 0xc000000b80000000 0x0000000b80000000
0xffffffffc0000000 0xffffffffc0000000 RWE 0x0
<snip...>
Update the size calculation for the new crash memory range to fix this
issue.
Note: This problem will not occur if the kdump kernel is loaded or
reloaded after a memory hot-remove operation.
Fixes: 849599b702 ("powerpc/crash: add crash memory hotplug support")
Reported-by: Shirisha G <shirisha@linux.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251105033941.1752287-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb31fef0d0 ]
amd_pstate_change_mode_without_dvr_change() calls cppc_set_auto_sel()
for all the present CPUs.
However, this callpath eventually calls cppc_set_reg_val() which
accesses the per-cpu cpc_desc_ptr object. This object is initialized
only for online CPUs via acpi_soft_cpu_online() -->
__acpi_processor_start() --> acpi_cppc_processor_probe().
Hence, restrict calling cppc_set_auto_sel() to only the online CPUs.
Fixes: 3ca7bc818d ("cpufreq: amd-pstate: Add guided mode control support via sysfs")
Suggested-by: Mario Limonciello (AMD) (kernel.org) <superm1@kernel.org>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d794b499f9 ]
The function ufshcd_read_string_desc() was duplicating memory starting
from the beginning of struct uc_string_id, which included the length and
type fields. As a result, the allocated buffer contained unwanted
metadata in addition to the string itself.
The correct behavior is to duplicate only the Unicode character array in
the structure. Update the code so that only the actual string content is
copied into the new buffer.
Fixes: 5f57704dbc ("scsi: ufs: Use kmemdup in ufshcd_read_string_desc()")
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://patch.msgid.link/20251107230518.4060231-3-beanhuo@iokpp.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4492d54d59 ]
This commit addresses a memleak issue of panthor_vma (or drm_gpuva)
structure in Panthor driver, that can happen if the GPU page table
update operation to map the pages fail.
The issue is very unlikely to occur in practice.
v2: Add panthor_vm_op_ctx_return_vma() helper (Boris)
v3: Add WARN_ON_ONCE (Boris)
Fixes: 647810ec24 ("drm/panthor: Add the MMU/VM logical block")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251021081042.1377406-1-akash.goel@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be99c62ac7 ]
After setting the inode mode of $Extend to a regular file, executing the
truncate system call will enter the do_truncate() routine, causing the
run_lock uninitialized error reported by syzbot.
Prior to patch 4e8011ffec, if the inode mode of $Extend was not set to
a regular file, the do_truncate() routine would not be entered.
Add the run_lock initialization when loading $Extend.
syzbot reported:
INFO: trying to register non-static key.
Call Trace:
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
assign_lock_key+0x133/0x150 kernel/locking/lockdep.c:984
register_lock_class+0x105/0x320 kernel/locking/lockdep.c:1299
__lock_acquire+0x99/0xd20 kernel/locking/lockdep.c:5112
lock_acquire+0x120/0x360 kernel/locking/lockdep.c:5868
down_write+0x96/0x1f0 kernel/locking/rwsem.c:1590
ntfs_set_size+0x140/0x200 fs/ntfs3/inode.c:860
ntfs_extend+0x1d9/0x970 fs/ntfs3/file.c:387
ntfs_setattr+0x2e8/0xbe0 fs/ntfs3/file.c:808
Fixes: 4e8011ffec ("ntfs3: pretend $Extend records as regular files")
Reported-by: syzbot+bdeb22a4b9a09ab9aa45@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bdeb22a4b9a09ab9aa45
Tested-by: syzbot+bdeb22a4b9a09ab9aa45@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e40b061cd3 ]
Move st,adc-freq, st,mod-12b, st,ref-sel, and st,sample-time properties
from the touchscreen subnode to the parent touch@44 node. These properties
are defined in the st,stmpe.yaml schema for the parent node, not the
touchscreen subnode, resolving the validation error about unevaluated
properties.
Fixes: 27538a18a4 ("ARM: dts: stm32: add STM32MP1-based Phytec SoM")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250915224611.169980-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a338d6e849 ]
After device_initialize() is called, use put_device() to release the
device according to kernel device management rules. While direct
kfree() work in this case, using put_device() is more correct.
Found by code review.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20251110005158.13394-1-make24@iscas.ac.cn
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4813dea9e2 ]
Binding incorrectly specifies the 'DBI' region as 'ELBI'. DBI is a must
have region for DWC controllers as it has the Root Port and controller
specific registers, while ELBI has optional registers.
Hence, fix the binding. Though this is an ABI break, this change is needed
to accurately describe the PCI memory map.
Fixes: 7cd2103911 ("dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251101-pci-meson-fix-v1-1-c50dcc56ed6a@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b518e86d1a ]
Correct possible race conditions during device removal.
Previously, a scheduled work item to reset a LUN could still execute
after the device was removed, leading to use-after-free and other
resource access issues.
This race condition occurs because the abort handler may schedule a LUN
reset concurrently with device removal via sdev_destroy(), leading to
use-after-free and improper access to freed resources.
- Check in the device reset handler if the device is still present in
the controller's SCSI device list before running; if not, the reset
is skipped.
- Cancel any pending TMF work that has not started in sdev_destroy().
- Ensure device freeing in sdev_destroy() is done while holding the
LUN reset mutex to avoid races with ongoing resets.
Fixes: 2d80f4054f ("scsi: smartpqi: Update deleting a LUN via sysfs")
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20251106163823.786828-3-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20da637eb5 ]
In stex_probe(), register_reboot_notifier() is called at the beginning,
but if any subsequent initialization step fails, the function returns
without unregistering the notifier, resulting in a resource leak.
Add unregister_reboot_notifier() in the out_disable error path to ensure
proper cleanup on all failure paths.
Fixes: 61b745fa63 ("scsi: stex: Add S6 support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251104094847.270-1-vulab@iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9517b82d8d ]
There is one uaf issue in recv_work when running NBD_CLEAR_SOCK and
NBD_CMD_RECONFIGURE:
nbd_genl_connect // conf_ref=2 (connect and recv_work A)
nbd_open // conf_ref=3
recv_work A done // conf_ref=2
NBD_CLEAR_SOCK // conf_ref=1
nbd_genl_reconfigure // conf_ref=2 (trigger recv_work B)
close nbd // conf_ref=1
recv_work B
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Or only running NBD_CLEAR_SOCK:
nbd_genl_connect // conf_ref=2
nbd_open // conf_ref=3
NBD_CLEAR_SOCK // conf_ref=2
close nbd
nbd_release
config_put // conf_ref=1
recv_work
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Commit 87aac3a80a ("nbd: call nbd_config_put() before notifying the
waiter") moved nbd_config_put() to run before waking up the waiter in
recv_work, in order to ensure that nbd_start_device_ioctl() would not
be woken up while nbd->task_recv was still uncleared.
However, in nbd_start_device_ioctl(), after being woken up it explicitly
calls flush_workqueue() to make sure all current works are finished.
Therefore, there is no need to move the config put ahead of the wakeup.
Move nbd_config_put() to the end of recv_work, so that the reference is
held for the whole lifetime of the worker thread. This makes sure the
config cannot be freed while recv_work is still running, even if clear
+ reconfigure interleave.
In addition, we don't need to worry about recv_work dropping the last
nbd_put (which causes deadlock):
path A (netlink with NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=1 (trigger recv_work)
open nbd // nbd_refs=2
NBD_CLEAR_SOCK
close nbd
nbd_release
nbd_disconnect_and_put
flush_workqueue // recv_work done
nbd_config_put
nbd_put // nbd_refs=1
nbd_put // nbd_refs=0
queue_work
path B (netlink without NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=2 (trigger recv_work)
open nbd // nbd_refs=3
NBD_CLEAR_SOCK // conf_refs=2
close nbd
nbd_release
nbd_config_put // conf_refs=1
nbd_put // nbd_refs=2
recv_work done // conf_refs=0, nbd_refs=1
rmmod // nbd_refs=0
Reported-by: syzbot+56fbf4c7ddf65e95c7cc@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6907edce.a70a0220.37351b.0014.GAE@google.com/T/
Fixes: 87aac3a80a ("nbd: make the config put is called before the notifying the waiter")
Depends-on: e2daec488c ("nbd: Fix hungtask when nbd_config_put")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dc7620554 ]
We attempted to use RCU to protect the pointer 'thread', but directly
passed the value when calling md_wakeup_thread(). This means that the
RCU pointer has been acquired before rcu_read_lock(), which renders
rcu_read_lock() ineffective and could lead to a use-after-free.
Link: https://lore.kernel.org/linux-raid/20251015083227.1079009-1-yun.zhou@windriver.com
Fixes: 4469315439 ("md: protect md_thread with rcu")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb1ebb1046 ]
For 'always-on' and 'boot-on' regulators, the set_machine_constraints()
may enable supply before enabling the main regulator, however if the
latter fails, the function returns with an error but the supply remains
enabled.
When this happens, the regulator_register() function continues on the
error path where it puts the supply regulator. Since enabling the supply
is not balanced with a disable call, a warning similar to the following
gets issued from _regulator_put():
[ 1.603889] WARNING: CPU: 2 PID: 44 at _regulator_put+0x8c/0xa0
[ 1.603908] Modules linked in:
[ 1.603926] CPU: 2 UID: 0 PID: 44 Comm: kworker/u16:3 Not tainted 6.18.0-rc4 #0 NONE
[ 1.603938] Hardware name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7 (DT)
[ 1.603945] Workqueue: async async_run_entry_fn
[ 1.603958] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.603967] pc : _regulator_put+0x8c/0xa0
[ 1.603976] lr : _regulator_put+0x7c/0xa0
...
[ 1.604140] Call trace:
[ 1.604145] _regulator_put+0x8c/0xa0 (P)
[ 1.604156] regulator_register+0x2ec/0xbf0
[ 1.604166] devm_regulator_register+0x60/0xb0
[ 1.604178] rpm_reg_probe+0x120/0x208
[ 1.604187] platform_probe+0x64/0xa8
...
In order to avoid this, change the set_machine_constraints() function to
disable the supply if enabling the main regulator fails.
Fixes: 05f224ca66 ("regulator: core: Clean enabling always-on regulators + their supplies")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20251107-regulator-disable-supply-v1-1-c95f0536f1b5@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e4e355ae7 ]
current large PEBS flag check only checks if sample_regs_user contains
unsupported GPRs but doesn't check if sample_regs_intr contains
unsupported GPRs.
Of course, currently PEBS HW supports to sample all perf supported GPRs,
the missed check doesn't cause real issue. But it won't be true any more
after the subsequent patches support to sample SSP register. SSP
sampling is not supported by adaptive PEBS HW and it would be supported
until arch-PEBS HW. So correct this issue.
Fixes: a47ba4d77e ("perf/x86: Enable free running PEBS for REGS_USER/INTR")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-5-dapeng1.mi@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2e5a3cea4 ]
The move extent operation should return -EOPNOTSUPP if any of the inodes
is a quota inode, rather than requiring both to be quota inodes.
Fixes: 02749a4c20 ("ext4: add ext4_is_quota_file()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-2-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b58acfd06 ]
When da9055_device_init() fails after regmap_add_irq_chip()
succeeds but mfd_add_devices() fails, the error handling path
only calls mfd_remove_devices() but forgets to call
regmap_del_irq_chip(). This results in a resource leak.
Fix this by adding regmap_del_irq_chip() to the error path so
that resources are released properly.
Fixes: 2896434cf2 ("mfd: DA9055 core driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251010011737.1078-1-vulab@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e52b43883d ]
With CONFIG_CPUMASK_OFFSTACK=y, the 'bind_writers' buffer is allocated via
alloc_cpumask_var() in param_set_cpumask(). But it is not freed, when
setting the module parameter multiple times by sysfs interface or removing
module.
Below kmemleak trace is seen for this issue:
unreferenced object 0xffff888100aabff8 (size 8):
comm "bash", pid 323, jiffies 4295059233
hex dump (first 8 bytes):
07 00 00 00 00 00 00 00 ........
backtrace (crc ac50919):
__kmalloc_node_noprof+0x2e5/0x420
alloc_cpumask_var_node+0x1f/0x30
param_set_cpumask+0x26/0xb0 [locktorture]
param_attr_store+0x93/0x100
module_attr_store+0x1b/0x30
kernfs_fop_write_iter+0x114/0x1b0
vfs_write+0x300/0x410
ksys_write+0x60/0xd0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This issue can be reproduced by:
insmod locktorture.ko bind_writers=1
rmmod locktorture
or:
insmod locktorture.ko bind_writers=1
echo 2 > /sys/module/locktorture/parameters/bind_writers
Considering that setting the module parameter 'bind_writers' or
'bind_readers' by sysfs interface has no real effect, set the parameter
permissions to 0444. To fix the memory leak when removing module, free
'bind_writers' and 'bind_readers' memory in lock_torture_cleanup().
Fixes: 73e3412424 ("locktorture: Add readers_bind and writers_bind module parameters")
Suggested-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8436112341 ]
When transitioning from 5-level to 4-level paging, the existing code
incorrectly accesses page table entries by directly dereferencing CR3 and
applying PAGE_MASK. This approach has several issues:
- __native_read_cr3() returns the raw CR3 register value, which on x86_64
includes not just the physical address but also flags Bits above the
physical address width of the system (i.e. above __PHYSICAL_MASK_SHIFT) are
also not masked.
- The pgd value is masked by PAGE_SIZE which doesn't take into account the
higher bits such as _PAGE_BIT_NOPTISHADOW.
Replace this with proper accessor functions:
- native_read_cr3_pa(): Uses CR3_ADDR_MASK to additionally mask metadata out
of CR3 (like SME or LAM bits). All remaining bits are real address bits or
reserved and must be 0.
- mask pgd value with PTE_PFN_MASK instead of PAGE_MASK, accounting for flags
above bit 51 (_PAGE_BIT_NOPTISHADOW in particular). Bits below 51, but above
the max physical address are reserved and must be 0.
Fixes: cb1c9e02b0 ("x86/efistub: Perform 4/5 level paging switch from the stub")
Reported-by: Michael van der Westhuizen <rmikey@meta.com>
Reported-by: Tobias Fleig <tfleig@meta.com>
Co-developed-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20251103141002.2280812-3-usamaarif642@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb22663125 ]
When transitioning from 5-level to 4-level paging, the existing code
incorrectly accesses page table entries by directly dereferencing CR3 and
applying PAGE_MASK. This approach has several issues:
- __native_read_cr3() returns the raw CR3 register value, which on x86_64
includes not just the physical address but also flags. Bits above the
physical address width of the system i.e. above __PHYSICAL_MASK_SHIFT) are
also not masked.
- The PGD entry is masked by PAGE_SIZE which doesn't take into account the
higher bits such as _PAGE_BIT_NOPTISHADOW.
Replace this with proper accessor functions:
- native_read_cr3_pa(): Uses CR3_ADDR_MASK to additionally mask metadata out
of CR3 (like SME or LAM bits). All remaining bits are real address bits or
reserved and must be 0.
- mask pgd value with PTE_PFN_MASK instead of PAGE_MASK, accounting for flags
above bit 51 (_PAGE_BIT_NOPTISHADOW in particular). Bits below 51, but above
the max physical address are reserved and must be 0.
Fixes: e9d0e6330e ("x86/boot/compressed/64: Prepare new top-level page table for trampoline")
Reported-by: Michael van der Westhuizen <rmikey@meta.com>
Reported-by: Tobias Fleig <tfleig@meta.com>
Co-developed-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/a482fd68-ce54-472d-8df1-33d6ac9f6bb5@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3862123e9b ]
The "ti,twl4030-power-n900" compatible string is obsolete and is not
supported by any in-kernel driver. Currently, the kernel falls back to
the second entry, "ti,twl4030-power-idle-osc-off", to bind a driver to
this node.
Make this fallback explicit by removing the obsolete board-specific
compatible. This preserves the existing functionality while making the
DTS compliant with the new, stricter 'ti,twl.yaml' binding.
Fixes: daebabd578 ("mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250914192516.164629-4-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7f3bc1830 ]
The "ti,twl4030-power-beagleboard-xm" compatible string is obsolete and
is not supported by any in-kernel driver. Currently, the kernel falls
back to the second entry, "ti,twl4030-power-idle-osc-off", to bind a
driver to this node.
Make this fallback explicit by removing the obsolete board-specific
compatible. This preserves the existing functionality while making the
DTS compliant with the new, stricter 'ti,twl.yaml' binding.
Fixes: 9188883fd6 ("ARM: dts: Enable twl4030 off-idle configuration for selected omaps")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250914192516.164629-3-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f596acc26 ]
When creating multi-split BTF we correctly set the start string offset
to be the size of the base string section plus the base BTF start
string offset; the latter is needed for multi-split BTF since the
offset is non-zero there.
Unfortunately the BTF parsing case needed that logic and it was
missed.
Fixes: 4e29128a9a ("libbpf/btf: Fix string handling to support multi-split BTF")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251104203309.318429-2-alan.maguire@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4e002d8a7 ]
When the CPU that the QSPI interrupt handler runs on (typically CPU 0)
is excessively busy, it can lead to rare cases of the IRQ thread not
running before the transfer timeout is reached.
While handling the timeouts, any pending transfers are cleaned up and
the message that they correspond to is marked as failed, which leaves
the curr_xfer field pointing at stale memory.
To avoid this, clear curr_xfer to NULL upon timeout and check for this
condition when the IRQ thread is finally run.
While at it, also make sure to clear interrupts on failure so that new
interrupts can be run.
A better, more involved, fix would move the interrupt clearing into a
hard IRQ handler. Ideally we would also want to signal that the IRQ
thread no longer needs to be run after the timeout is hit to avoid the
extra check for a valid transfer.
Fixes: 921fc1838f ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20251028155703.4151791-2-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98dd514344 ]
If the MMU is down, panthor_vm_unmap_range() might return an error.
We expect the page table to be updated still, and if the MMU is blocked,
the rest of the GPU should be blocked too, so no risk of accessing
physical memory returned to the system (which the current code doesn't
cover for anyway).
Proceed with the rest of the cleanup instead of bailing out and leaving
the va_node inserted in the drm_mm, which leads to UAF when other
adjacent nodes are removed from the drm_mm tree.
Reported-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Closes: https://gitlab.freedesktop.org/panfrost/linux/-/issues/57
Fixes: 8a1cc07578 ("drm/panthor: Add GEM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251031154818.821054-2-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08be57e6e8 ]
There is a race between panthor_device_unplug() and
panthor_device_suspend() which can lead to IRQ handlers running on a
powered down GPU. This is how it can happen:
- unplug routine calls drm_dev_unplug()
- panthor_device_suspend() can now execute, and will skip a lot of
important work because the device is currently marked as unplugged.
- IRQs will remain active in this case and IRQ handlers can therefore
try to access a powered down GPU.
The fix is simply to take the PM ref in panthor_device_unplug() a
little bit earlier, before drm_dev_unplug().
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Fixes: 5fe909cae1 ("drm/panthor: Add the device logical block")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251022103242.1083311-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7051f6ba96 ]
The function panthor_fw_unplug() will free the FW memory sections.
The problem is that there could still be pending FW events which are yet
not handled at this point. process_fw_events_work() can in this case try
to access said freed memory.
Simply call disable_work_sync() to both drain and prevent future
invocation of process_fw_events_work().
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251027140217.121274-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94a6d20fea ]
group_free_queue() can be called on a partially initialized queue
object if something fails in group_create_queue(). Make sure we don't
call drm_sched_entity_destroy() on an entity that hasn't been
initialized.
Fixes: 7d9c3442b0 ("drm/panthor: Defer scheduler entitiy destruction to queue release")
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251031160318.832427-2-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb7939e332 ]
In practice it's not going to fail because we're passing the current
sanity checks done by drm_sched_entity_init(), and that's the only
reason it would return an error, but better safe than sorry.
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251031160318.832427-1-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a63dd8fd13 ]
When page cache is used, writebacks are done on a page granularity, and it
is expected that the underlying filesystem (such as v9fs) should respect
the write position. However, currently v9fs will passthrough O_APPEND to
the server even on cached mode. This causes data corruption if a sync or
fstat gets between two writes to the same file.
This patch removes the APPEND flag from the open request we send to the
server when writeback caching is involved. I believe keeping server-side
APPEND is probably fine for uncached mode (even if two fds are opened, one
without O_APPEND and one with it, this should still be fine since they
would use separate fid for the writes).
Signed-off-by: Tingmao Wang <m@maowtm.org>
Fixes: 4eb3117888 ("fs/9p: Rework cache modes and add new options to Documentation")
Message-ID: <20251102235631.8724-1-m@maowtm.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea14bae6df ]
Since wm831x_set_bits() may return error, log failure and exit from
wm831x_usb_limit_change() in such case.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 626b6cd5f5 ("power: wm831x_power: Support USB charger current limit management")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251009170553.566561-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15aca30cc6 ]
There is a typo in rt9467_set_value_from_ranges() that can cause leaving local
variable sel with an undefined value which is then used in regmap_field_write().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 6f7f70e3a8 ("power: supply: rt9467: Add Richtek RT9467 charger driver")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20251009145308.1830893-1-m.masimov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b27fe2d8d ]
The return value of rt9467_set_value_from_ranges() when setting AICL VTH is
not checked, even though it may fail.
Log error and return from rt9467_run_aicl() on fail.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 6f7f70e3a8 ("power: supply: rt9467: Add Richtek RT9467 charger driver")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251009144725.562278-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c68ac48c5 ]
Since iio_read_channel_processed() may fail, return its exit code on error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 814755c48f ("power: max17040: get thermal data from adc if available")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251008133648.559286-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92ec7e7b86 ]
Since devm_delayed_work_autocancel() may fail, add return code check and
exit cw_bat_probe() on error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0cb172a491 ("power: supply: cw2015: Use device managed API to simplify the code")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251008120711.556021-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cdc4d488c ]
The device node pointers `np_conn` and `np_edev`, obtained from
of_parse_phandle() and of_get_parent() respectively, are not released.
This results in a reference count leak.
Add of_node_put() calls after the last use of these device nodes to
properly release their references and fix the leaks.
Fixes: 8242336dc8 ("power: supply: rt5033_charger: Add cable detection and USB OTG supply")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250929113234.1726-1-vulab@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 163e5f2b96 ]
When using perf record with the `--overwrite` option, a segmentation fault
occurs if an event fails to open. For example:
perf record -e cycles-ct -F 1000 -a --overwrite
Error:
cycles-ct:H: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'
perf: Segmentation fault
#0 0x6466b6 in dump_stack debug.c:366
#1 0x646729 in sighandler_dump_stack debug.c:378
#2 0x453fd1 in sigsegv_handler builtin-record.c:722
#3 0x7f8454e65090 in __restore_rt libc-2.32.so[54090]
#4 0x6c5671 in __perf_event__synthesize_id_index synthetic-events.c:1862
#5 0x6c5ac0 in perf_event__synthesize_id_index synthetic-events.c:1943
#6 0x458090 in record__synthesize builtin-record.c:2075
#7 0x45a85a in __cmd_record builtin-record.c:2888
#8 0x45deb6 in cmd_record builtin-record.c:4374
#9 0x4e5e33 in run_builtin perf.c:349
#10 0x4e60bf in handle_internal_command perf.c:401
#11 0x4e6215 in run_argv perf.c:448
#12 0x4e653a in main perf.c:555
#13 0x7f8454e4fa72 in __libc_start_main libc-2.32.so[3ea72]
#14 0x43a3ee in _start ??:0
The --overwrite option implies --tail-synthesize, which collects non-sample
events reflecting the system status when recording finishes. However, when
evsel opening fails (e.g., unsupported event 'cycles-ct'), session->evlist
is not initialized and remains NULL. The code unconditionally calls
record__synthesize() in the error path, which iterates through the NULL
evlist pointer and causes a segfault.
To fix it, move the record__synthesize() call inside the error check block, so
it's only called when there was no error during recording, ensuring that evlist
is properly initialized.
Fixes: 4ea648aec0 ("perf record: Add --tail-synthesize option")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 553d18c98a ]
On some machines, it caused troubles when it tried to find kernel
symbols. I think it's because kernel modules and kallsyms are messed
up during load and split.
Basically we want to make sure the kernel map is loaded and the code has
it in the lock_contention_read(). But recently we added more lookups in
the lock_contention_prepare() which is called before _read().
Also the kernel map (kallsyms) may not be the first one in the group
like on ARM. Let's use machine__kernel_map() rather than just loading
the first map.
Reviewed-by: Ian Rogers <irogers@google.com>
Fixes: 688d2e8de2 ("perf lock contention: Add -l/--lock-addr option")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1aa93005d ]
The call to devm_platform_ioremap_resource() was replaced by a call to
devm_platform_get_and_ioremap_resource(), but the comment referring to
the function's possible returned error codes was not updated.
Fixes: 927f3e0253 ("drm/imagination: Implement MIPS firmware processor and MMU support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/2266514318480d17f52c7e5e67578dae6827914e.1761745586.git.geert+renesas@glider.be
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
