Add support for AES-CTR and AES-XCTR to the crypto library.
These will be used to provide streamlined implementations of the
"ctr(aes)" and "xctr(aes)" crypto_skcipher algorithms. Most users of
"ctr(aes)" will also be able to switch to the library, which as usual
will be simpler and faster, e.g.:
- net/mac80211/fils_aead.c
- net/mac802154/llsec.c
As usual, the architecture-optimized AES-CTR and AES-XCTR code will be
migrated into the library as well (using the hooks provided in this
commit), eliminating lots of repetitive boilerplate code.
This is also a prerequisite for supporting AES-GCM, AES-CCM, and
AES-HCTR2 in the crypto library.
Initial test coverage is provided by the crypto_skcipher support added
in a later commit. I'm planning a KUnit test suite as well.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://patch.msgid.link/20260715221153.246410-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add support for AES-CBC and AES-CBC-CTS to the crypto library.
These will be used to provide streamlined implementations of the
"cbc(aes)" and "cts(cbc(aes))" crypto_skcipher algorithms. Most users
of these crypto_skcipher algorithms will also be able to switch to the
library, which as usual will be simpler and faster, e.g.:
- block/blk-crypto-fallback.c (for AES-128-CBC-ESSIV)
- fs/crypto/crypto.c (for AES-128-CBC-ESSIV)
- fs/crypto/fname.c (for AES-256-CTS and AES-128-CBC)
- kernel/bpf/crypto.c
- net/ceph/crypto.c
- security/keys/encrypted-keys/encrypted.c
As usual, the architecture-optimized AES-CBC and AES-CBC-CTS code will
be migrated into the library as well (using the hooks provided in this
commit), eliminating lots of repetitive boilerplate code.
Initial test coverage is provided by the crypto_skcipher support added
in a later commit. I'm planning a KUnit test suite as well.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://patch.msgid.link/20260715221153.246410-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add support for AES-ECB to the crypto library.
This will be used to provide a streamlined implementation of the
"ecb(aes)" crypto_skcipher algorithm. fs/crypto/keysetup_v1.c will also
use aes_ecb_encrypt() directly.
As usual, the architecture-optimized AES-ECB code will be migrated into
the library as well (using the hooks provided in this commit),
eliminating lots of repetitive boilerplate code.
ECB is obsolete of course, but we need this for parity with the
traditional API and to support some odd users of ECB in the kernel.
Initial test coverage is provided by the crypto_skcipher support added
in a later commit. I'm planning a KUnit test suite as well.
Create a documentation file libcrypto-unauth-encryption.rst to hold the
documentation for this and other unauthenticated encryption modes.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://patch.msgid.link/20260715221153.246410-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Make the AES-XTS key verification code callable by the crypto library by
splitting out a helper function that doesn't use crypto_skcipher.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://patch.msgid.link/20260715221153.246410-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Fix the last remaining breakage caused by missing a SoC IO access
update. Commit e1f3a00670 ("m68k: coldfire: use ColdFire specifc
IO access in SoC code") missed this read16() call which should be
mcf_read16().
Fixes: e1f3a00670 ("m68k: coldfire: use ColdFire specifc IO access in SoC code")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607180731.U4tiwFcQ-lkp@intel.com/
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Babanpreet Singh <bbnpreetsingh@gmail.com> says:
Two small cleanups for the Axiado SPI driver, both defects present
since the driver was added in e75a6b00ad ("spi: axiado: Add driver
for Axiado SPI DB controller").
Patch 1 addresses the coccinelle cond_no_effect warning reported by
the kernel test robot on 2026-07-12 [1]: the RX-only/full-duplex
else-if arm and the trailing else arm in ax_transfer_one() have
identical bodies, so the second condition has no effect. The arms are
merged; no functional change (on x86_64/gcc 14, only
ax_transfer_one()'s object code changes, dropping the dead condition
evaluation).
Patch 2 fixes the kernel-doc comments in the driver: a copy-pasted
function name on ax_spi_get_rx_byte_for_irq(), a /** block with no
identifier line on ax_spi_process_rx_and_finalize(), and stale/missing
member documentation on struct ax_spi. This silences the driver's two
W=1 kernel-doc warnings plus five more visible when kernel-doc is run
on the header directly.
Both patches are against spi/for-next; they are independent of each
other except for touching the same file.
[1] https://lore.kernel.org/r/202607121827.djB0zLAj-lkp@intel.com/
Link: https://patch.msgid.link/20260713060807.7-1-bbnpreetsingh@gmail.com
Running kernel-doc -Wall on the driver reports 7 warnings, all present
since the driver was added in commit e75a6b00ad ("spi: axiado: Add
driver for Axiado SPI DB controller"). Two are in spi-axiado.c and
also show up in W=1 builds of drivers/spi:
Warning: drivers/spi/spi-axiado.c:226 expecting prototype for
ax_spi_get_rx_byte(). Prototype was for ax_spi_get_rx_byte_for_irq()
instead
Warning: drivers/spi/spi-axiado.c:248 This comment starts with
'/**', but isn't a kernel-doc comment. Refer to
Documentation/doc-guide/kernel-doc.rst
The other five are for struct ax_spi in spi-axiado.h, seen when
kernel-doc is invoked on the header directly (headers are not scanned
by the build-time kernel-doc checks):
Warning: drivers/spi/spi-axiado.h:130 Excess struct member 'rxbuf'
description in 'ax_spi'
Warning: drivers/spi/spi-axiado.h:130 Excess struct member 'txbuf'
description in 'ax_spi'
Warning: drivers/spi/spi-axiado.h:130 struct member 'clk_rate' not
described in 'ax_spi'
Warning: drivers/spi/spi-axiado.h:130 struct member 'rx_buf' not
described in 'ax_spi'
Warning: drivers/spi/spi-axiado.h:130 struct member 'tx_buf' not
described in 'ax_spi'
Fix the three underlying defects:
- The comment on ax_spi_get_rx_byte_for_irq() carries the name of
ax_spi_get_rx_byte(), from which it was evidently copied when the
IRQ variant was split out; fix the function name.
- The comment on ax_spi_process_rx_and_finalize() is opened with the
kernel-doc /** marker but has no identifier line; turn it into
proper kernel-doc (identifier line, @ctlr, Return:) since it
already describes the behavior and the return value.
- The struct ax_spi comment documents @txbuf and @rxbuf while the
members are named tx_buf and rx_buf, and does not document
clk_rate; fix the member names and describe clk_rate.
No functional change.
Assisted-by: Claude:claude-fable-5 [kernel-doc]
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Acked-By: Tzu-Hao Wei <twei@axiado.com>
Link: https://patch.msgid.link/20260713060807.7-3-bbnpreetsingh@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The else-if arm taken for RX-only and full-duplex transfers and the
trailing else arm in the RX bookkeeping setup of ax_transfer_one()
have identical bodies, so the second condition has no effect:
drivers/spi/spi-axiado.c:433:8-10: WARNING: possible condition with
no effect (if == else)
The trailing else arm (neither TX nor RX buffer) is also unreachable:
the SPI core only calls the ->transfer_one() callback for transfers
that carry at least one buffer, see spi_transfer_one_message().
Merge the two arms into a single else branch and fold their comments.
No functional change. The redundant condition has been present since
the driver was added in commit e75a6b00ad ("spi: axiado: Add driver
for Axiado SPI DB controller").
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202607121827.djB0zLAj-lkp@intel.com/
Assisted-by: Claude:claude-fable-5 [coccinelle]
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Link: https://patch.msgid.link/20260713060807.7-2-bbnpreetsingh@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shengjiu Wang <shengjiu.wang@nxp.com> says:
Both fsl_asrc_probe() and fsl_easrc_probe() call fsl_asrc_m2m_init()
near the end of their probe functions. On failure, the original code
did a bare return ret, bypassing the existing error labels that call
pm_runtime_disable(). This leaves runtime PM enabled and the device
in an inconsistent state after a failed probe.
Fix both drivers by replacing the bare return with a goto to the
appropriate cleanup label (err_pm_get_sync for fsl_asrc and
err_pm_disable for fsl_easrc), ensuring pm_runtime_disable() is
always called on the probe error path.
Link: https://patch.msgid.link/20260715024758.1252801-1-shengjiu.wang@oss.nxp.com
When fsl_asrc_m2m_init() fails in fsl_easrc_probe(), the code did a
bare return ret, bypassing pm_runtime_disable() in err_pm_disable.
Use goto err_pm_disable to ensure proper cleanup on failure.
Fixes: b62eaff065 ("ASoC: fsl_easrc: register m2m platform device")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260715024758.1252801-3-shengjiu.wang@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When fsl_asrc_m2m_init() fails in fsl_asrc_probe(), the code did a
bare return ret, bypassing pm_runtime_disable() in err_pm_get_sync.
Use goto err_pm_get_sync to ensure proper cleanup on failure.
Fixes: 286d658477 ("ASoC: fsl_asrc: register m2m platform device")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260715024758.1252801-2-shengjiu.wang@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Robert Marko <robert.marko@sartura.hr> says:
This series adds QSPI support for the Microchip LAN969x which has two QSPI
controllers based on SAMA7G5.
It requires pad calibration, supports DMA, and supports 100 MHz operation.
It requires a different init sequence to SAMA7G5 so support for custom
.init per controller caps is added, and existing controllers relying on
checking gclk are converted to it.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://patch.msgid.link/20260709112006.390742-1-robert.marko@sartura.hr
Microchip LAN969x has two QSPI controllers based on SAMA7G5 QSPI.
It requires pad calibration, supports DMA, and supports 100 MHz operation.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://patch.msgid.link/20260709112006.390742-5-robert.marko@sartura.hr
Signed-off-by: Mark Brown <broonie@kernel.org>
Assign the existing SAMA7G5 initialization routine to every generic
clock variant and dispatch initialization exclusively through the
capability callback.
This keeps hardware capabilities separate from initialization selection
and lets variants override the sequence explicitly.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://patch.msgid.link/20260709112006.390742-4-robert.marko@sartura.hr
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow controller variants to provide a custom initialization callback
through their capability data.
This prepares the driver for variants which require a different hardware
initialization sequence without adding SoC checks to the common path.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://patch.msgid.link/20260709112006.390742-3-robert.marko@sartura.hr
Signed-off-by: Mark Brown <broonie@kernel.org>
In k1_spi_write, the count variable is intended to represent the number
of slots available for writing into the TX FIFO.
The current implementation uses FIELD_GET(SSP_STATUS_TFL, val) in an
attempt to determine this count, but this register field returns the
number of occupied slots, not the available space. The previous
implementation attempted to handle this via a ternary operator (? :
K1_SPI_FIFO_SIZE), which incorrectly assumed that the hardware returned
0 when the FIFO was empty (meaning all slots were available), leading to
incorrect accounting of the buffer space.
Fix this by calculating the free slots: count = K1_SPI_FIFO_SIZE -
FIELD_GET(SSP_STATUS_TFL, val);
The associated comment has been updated to reflect the logic change: The
old comment reflected an incorrect assumption about the hardware
behavior, which was the root cause of the previous buggy logic.
This patch accurately and concisely describes the purpose of the new
calculation.
Signed-off-by: Peixin Xie <peixin.xie@spacemit.com>
Signed-off-by: Zhengyu He <hezhy472013@gmail.com>
Link: https://patch.msgid.link/20260715-k1-spi-tx-fifo-fix-v1-for-next-v1-1-02024223b08a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown <broonie@kernel.org> says:
While reviewing another fix for the tas2562 volume control I noticed a
few issues with the put() operation, this series fixes them.
It's also a bit weird that the volume control is defined with twice as
many values as can actually be set, probably the best fix there is to
regnerate the table of volume values with the intermediate values.
Link: https://patch.msgid.link/20260715-asoc-tas2562-put-retval-v1-0-97bf467c924e@kernel.org
The tas2562 digital volume is spread over four registers and is implemented
as lookups into a table so the driver stores the value for the userspace
control in the driver data. This defaults to 0 due to kzalloc() but the
register default is 0x40400000 which maps onto something a bit over the
largest value defined in the lookup table. While it's not an exact match
update the default to the largest value, avoiding user surprise due to a
sudden change on first write.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260715-asoc-tas2562-put-retval-v1-3-97bf467c924e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA put() operations should return 0 for noop updates and 1 if the
value of the control changed, this is used by the ALSA core to generate
events to userspace. tas2562_volume_control_put() does not implement
this, it just writes whatever value userspace wrote to the device and
returns 0 regardless of what the previous value was. Fix this by
suppressing writes if the value is unchanged and returning 1 if the
writes succeed.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260715-asoc-tas2562-put-retval-v1-2-97bf467c924e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
tas2562_volume_control_put() does not do any validation of the control
value written by userspace, it uses it to look up a value in a fixed
size array which can easily be overflowed and then writes whatever value
it gets back to the device. Add validation that we are loading a value
we have in the array.
Cc: stable@vger.kernel.org
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260715-asoc-tas2562-put-retval-v1-1-97bf467c924e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Haidar Lee <haidar.lee@adlinktech.com> says:
The 'Digital Volume Control' added in v5.7 has never worked correctly:
the driver writes the 32-bit DVC coefficient LSB first, but the device
latches the whole coefficient on the write to the last byte (DVC_CFG4),
so every volume change applies a mix of the previous coefficient's
upper bytes and the new LSB. Depending on the sequence of values this
mutes the output entirely or plays at full volume regardless of the
requested level.
Debugged on a TAS2562 (ADLINK OSM-520 / MT8189): traced the I2C writes
with ftrace to confirm the driver writes the intended bytes, then
reproduced both behaviours by writing the same coefficients manually in
each byte order. Patch 1 fixes the write order; patch 2 fixes two wrong
entries in the volume lookup table found while debugging this.
Link: https://patch.msgid.link/20260715-tas2562-dvc-fix-v1-0-072b13901b20@adlinktech.com
The float_vol_db_lookup table is supposed to hold
round(10^(dB/20) * 2^30) for every 2 dB step from -110 dB to 0 dB,
which is 56 entries, but it only has 55: the -90 dB entry duplicates
the -92 dB value (0x0000695b) and the -20 dB entry (0x06666666) is
missing altogether. As a result every step between -90 dB and -22 dB
is off by 2 dB, and the control's maximum raw value of 110 indexes one
element past the end of the array.
Replace the duplicated -90 dB entry with the correct value 0x000084a3
and add the missing -20 dB entry, bringing the table to the full 56
entries so index 55 (raw value 110, 0 dB) is in range again.
Fixes: bf726b1c86 ("ASoC: tas2562: Add support for digital volume control")
Cc: stable@vger.kernel.org
Signed-off-by: Haidar Lee <haidar.lee@adlinktech.com>
Link: https://patch.msgid.link/20260715-tas2562-dvc-fix-v1-2-072b13901b20@adlinktech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TAS2562 applies the 32-bit digital volume coefficient to the
playback path when the last byte, DVC_CFG4 (book 0 page 2 reg 0x0F), is
written. tas2562_volume_control_put() wrote DVC_CFG4 first and DVC_CFG1
(the MSB) last, so every volume change latched a value made of the
previous coefficient's upper three bytes combined with the new LSB; the
remaining bytes only took effect on the next volume change.
In practice the control was unusable: the first setting after power-on
always played at roughly 0 dB no matter what value was requested (the
chip's default upper bytes were still latched), and most subsequent
changes muted the output entirely or produced a distorted, over-unity
gain.
Verified on a TAS2562 (ADLINK OSM-520 / MT8189 board) by tracing the
I2C writes with ftrace and by writing the same coefficients manually in
both byte orders: written MSB-first the register block behaves exactly
as the driver expects, LSB-first reproduces the broken behaviour.
Write the bytes MSB first with DVC_CFG4 last so the complete new
coefficient is latched atomically.
Fixes: bf726b1c86 ("ASoC: tas2562: Add support for digital volume control")
Cc: stable@vger.kernel.org
Signed-off-by: Haidar Lee <haidar.lee@adlinktech.com>
Link: https://patch.msgid.link/20260715-tas2562-dvc-fix-v1-1-072b13901b20@adlinktech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Call flush_cache_vmap() after populating new vmemmap pages, on all
architectures. This avoids spurious faults on RISC-V
microarchitectures that cache PTEs marked as non-present
- Disable LTO for the vDSO to prevent the compiler from eliding
functions that are used, but which don't appear to be
- Fix an issue with libgcc's unwinder and signal handlers by dropping
an unnecessary CFI landing pad instruction in __vdso_rt_sigreturn
(similar to what was done on ARM64)
- Avoid reading uninitialized memory under certain conditions in
hwprobe_get_cpus()
- Save some memory and I$ when CONFIG_DYNAMIC_FTRACE=n by avoiding
our four-byte function alignment requirement in that case
- Avoid clang warnings about null-pointer arithmetic in the I/O-port
accessor macros (inb, outb, etc.) by ifdeffing them out when
!CONFIG_HAS_IOPORT
- Make the build of the lazy TLB flushing code in the vmalloc path
depend on CONFIG_64BIT and CONFIG_MMU (since those platforms are the
only ones that use it)
-----BEGIN PGP SIGNATURE-----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=gKi/
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Call flush_cache_vmap() after populating new vmemmap pages, on all
architectures. This avoids spurious faults on RISC-V
microarchitectures that cache PTEs marked as non-present
- Disable LTO for the vDSO to prevent the compiler from eliding
functions that are used, but which don't appear to be
- Fix an issue with libgcc's unwinder and signal handlers by dropping
an unnecessary CFI landing pad instruction in __vdso_rt_sigreturn
(similar to what was done on ARM64)
- Avoid reading uninitialized memory under certain conditions in
hwprobe_get_cpus()
- Save some memory and I$ when CONFIG_DYNAMIC_FTRACE=n by avoiding our
four-byte function alignment requirement in that case
- Avoid clang warnings about null-pointer arithmetic in the I/O-port
accessor macros (inb, outb, etc.) by ifdeffing them out when
!CONFIG_HAS_IOPORT
- Make the build of the lazy TLB flushing code in the vmalloc path
depend on CONFIG_64BIT and CONFIG_MMU (since those platforms are the
only ones that use it)
* tag 'riscv-for-linus-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: hwprobe: Avoid uninitialized read in hwprobe_get_cpus()
arch/riscv: vdso: remove CFI landing pad from rt_sigreturn
riscv: vdso: Do not use LTO for the vDSO
riscv: io: avoid null-pointer arithmetic in PIO helpers
riscv: Gate FUNCTION_ALIGNMENT_4B on DYNAMIC_FTRACE
mm/sparse-vmemmap: flush_cache_vmap() after hotplugging vmemmap
riscv: mm: Make mark_new_valid_map() stuff depend on 64BIT && MMU
JBL Quantum650 Wireless (0ecb:2125) requires the same workaround that
was used for JBL Quantum610 and Quantum810 for limiting the sample rate.
Without it, the capture (microphone) stream fails to work. Setting the
QUIRK_FLAG_FIXED_RATE flag, as done for the sibling models, makes both
playback and capture work correctly.
Signed-off-by: Daniel C. Ribeiro <dcoutinho.96@gmail.com>
Link: https://patch.msgid.link/20260719090037.40149-1-dcoutinho.96@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The rzg2l_gpt parameter was passed to rzg2l_gpt_calculate_prescale() but
never used inside the function. Remove it and update the sole call site
accordingly.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260604095647.108654-6-biju.das.jz@bp.renesas.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qHz/
-----END PGP SIGNATURE-----
Merge tag 'block-7.2-20260717' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fixes for the dio bounce buffer helpers: correct the alignment of
bounced dio read bios to avoid a double unpin, handle huge zero
folios in bio_free_folios(), and don't warn on the larger-order folio
attempts in the greedy allocation path.
- Try a slab allocation in bio_alloc_bioset() before falling back to
the mempool, restoring the previous behavior for non-sleeping
allocations from a cache-enabled bioset.
- Serialize elevator changes for the same queue using the writer lock.
- Fix a race in blk_time_get_ns() where a task preempted between
setting PF_BLOCK_TS and the cached-timestamp reload could return 0.
- blk-cgroup fix for leaks and the online flag on a radix_tree_insert()
failure in blkg_create().
- Free the copied pages when blk_rq_map_kern() fails after
blk_rq_append_bio() rejects the bio.
- Remove manually added partitions on loop device detach, fixing dead
partition devices left behind and a subsequent LOOP_CONFIGURE -EBUSY
- Bound the AIX partition lvd scan to the sector that was actually
read.
- Show the block operation in error injection rules (Jackie)
* tag 'block-7.2-20260717' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: fix aligning of bounced dio read bios
block: handle huge zero folios in bio_free_folios
block: try slab allocation in bio_alloc_bioset() before mempool
block: show operation in error injection rules
block: serialize elevator changes for the same queue using a writer lock
block: free copied pages when blk_rq_map_kern() fails
block: do not warn when doing greedy allocation in folio_alloc_greedy()
partitions: aix: bound the lvd scan to one sector
blk-cgroup: fix leaks and online flag on radix_tree_insert failure
loop: remove manually added partitions on detach
block: fix race in blk_time_get_ns() returning 0
-----BEGIN PGP SIGNATURE-----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=Ue52
-----END PGP SIGNATURE-----
Merge tag 'io_uring-7.2-20260717' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix a use-after-free in the bpf-ops struct_ops path, where the same
io_uring_bpf_ops map could be registered more than once.
- Fix the deferred iovec free for the provided-buffer grow path, which
could leave the caller with a dangling iovec and result in repeated
frees. Follow-up to the earlier fix in this series.
- Zero-check the unused addr3/pad2 SQE fields for unlinkat
* tag 'io_uring-7.2-20260717' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/bpf-ops: reject re-registration of an already-bound ops
io_uring/fs: check unused sqe fields for unlinkat
io_uring/kbuf: free the replaced iovec after a successful grow
A couple of fairly routine driver fixes, nothing too remarkable.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmpcxP4ACgkQJNaLcl1U
h9Cnigf9FRw9pWxDNEhhABYvy7A9kcSTYWDoYEoljdsvYzGCWpbkS9VCmiSOcxlA
WYrVkrknUrjnd2twMyqWSs3MGePcncEchlOKOqTF8bA12dKSiRgFlldZ5MoRgYrf
GAbFzlu0Z3wZgGK2n8NwHwQ4ut0LcM4PYYKqQ+nABbURmfCA+oCnbE2QhCdRxHUB
MtHiA1fzoBnnCHsDkRnI5MTbkKWA2r2nqzQY7pzojtwrR4xghm1MUO16gD5V8VM9
w5ndpdLIer3FtHpwy1OqtuvXnZJEu8xWqQ/uAv+HfdHsRvckPB6hKt6GkSKVdut/
R4e8ZbIuSfEwcwy8VC4fRQjVw5BNVQ==
=b2Lc
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fairly routine driver fixes, nothing too remarkable"
* tag 'spi-fix-v7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Fix indirect write timeout when DMA read mode is enabled
spi: dw-dma: Wait for controller idle before completing Tx
ub->completion is only re-armed by a successful START_USER_RECOVERY. If
the ublk server sends END_USER_RECOVERY without one - e.g. its START
failed with -EBUSY and the error was ignored - the wait is satisfied by
the stale completion of the previous recovery cycle, and the device is
marked LIVE and the requeue list kicked while the FETCH stream is still
running and ubq->canceling is still set. The kick redispatches a
previously requeued request, __ublk_queue_rq_common() sees ->canceling
and parks it again via __ublk_abort_rq(), and after the last FETCH
clears ->canceling nothing ever kicks the requeue list again: the
request is stranded there while holding its tag. If it is the flush
machinery's flush_rq, every subsequent fsync piles up in uninterruptible
sleep and teardown hangs on tag draining. This matches a report of a
lost PREFLUSH with ext4 on top of ublk after daemon crash recovery.
ub->completion is an edge-triggered latch used as a proxy for the level
condition "every queue has fetched all I/O commands", which can regress
(F_BATCH's UNPREP, daemon death) and whose re-arm can be skipped. Drop
it and wait on the real condition instead: the new helper
ublk_wait_dev_ready_and_lock() waits on ublk_dev_ready() via
wait_var_event_interruptible(), woken from ublk_mark_io_ready(), then
re-checks it under ub->mutex, waiting again on regression, and returns
with the mutex held and readiness guaranteed.
Readiness becomes true in the same ub->mutex critical section that
clears the last queue's ->canceling, so END_USER_RECOVERY marks the
device LIVE and kicks the requeue list strictly after ->canceling
clears. The wait stays interruptible, so a server whose daemon died can
still be signalled out. For ublk_ctrl_start_dev() this replaces the
fail-fast -EINVAL on an F_BATCH ready->UNPREP regression with waiting
until the device is ready again.
Reported-by: George Salisbury <gsalisbury@apnic.net>
Fixes: 728cbac5fe ("ublk: move device reset into ublk_ch_release()")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260719134540.120269-1-tom.leiming@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
One straightforward driver fix for some incorrectly described bitfields
in the ltc3676 driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmpcxWoACgkQJNaLcl1U
h9Bj2Af+J+ibj5u+dpsT9GdFRkV3dkZtR7wAShFlbVYRI0dtEvrvAOFQ+/dh8whX
vRs8qvn8JtpXepUs2DsZlvB70CEdK5yYIuAQBJAj1QpolWLd069q0TK3fHAdqD6R
61KCpuhbQ8JTCYzL/BCmKhYTqr9A9vhC0hn6cFflqT3Ngunxvayal/pIiutC0S0W
AT57CKul41+DUPJ7XhKlCuuo2ZUL6wiYKkecRp8+hsMWllUaN9Jg+gsPKZQXwL18
ykKOsfYqQR+qinUNRqZTvzJUlMZNJCOpeTZnrVx1gIRv03UpCFnLSCQlDDRWqHkZ
CfDemVw6oZdyHY+0qNroKYENpbqWoA==
=SYeH
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One straightforward driver fix for some incorrectly described
bitfields in the ltc3676 driver"
* tag 'regulator-fix-v7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: ltc3676: Fix incorrect IRQSTAT bit offsets
- Reject too long acpi_rsdp= boot parameter values
(Thorsten Blum)
- Validate console=uart8250 baud rate to fix early boot hang
(Thorsten Blum)
- Remove dead Makefile rule (Ethan Nelson-Moore)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=upW0
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Reject too long acpi_rsdp= boot parameter values (Thorsten Blum)
- Validate console=uart8250 baud rate to fix early boot hang (Thorsten
Blum)
- Remove dead Makefile rule (Ethan Nelson-Moore)
* tag 'x86-urgent-2026-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Validate console=uart8250 baud rate to fix early boot hang
x86/boot: Reject too long acpi_rsdp= values
x86/cpu: Remove Makefile rule for removed UMC CPU support
Do not assume there are only bank 0 and bank 1 available, just use '!='
for bank comparison.
Fixes: d0ddfd241e ("hwmon: (asus-ec-sensors) add driver for ASUS EC")
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20260711074217.554656-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
MAX34451 and ADPM chips do not support standard PMBus VIN/IIN limit
registers, manufacturer specific min/max registers, or undercurrent
or undertemperature fault limits. STATUS_BYTE and STATUS_OTHER are also
not available. Accessing these non-existent registers during driver
initialization triggers a CML error and asserts ALERT. Handled by
blocking these functions during read/write.
Fixes: 7a001dbab4 ("hwmon: (pmbus/max34440) Add support for MAX34451.")
Fixes: 629cf8f6c2 ("hwmon: (pmbus/max34440) Add support for ADPM12160")
Fixes: 2e0b52f1ae ("hwmon: (pmbus/max34440): add support adpm12200")
Fixes: 479bfeba2e ("hwmon: (pmbus/max34440): add support adpm12250")
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://lore.kernel.org/r/20260716-max34451_fixes-v1-1-a941b27eaecb@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Apple's System Management Controller exposes the readings
from numerous sensors scattered around the SoC and elsewhere
in the machine. Some of these sensors are reliably common
on all devices, whereas others are exposed at SMC keys
specific to either the SoC or even the particular device.
To account for this and expose the right sensors for the
right device without tedious Devicetree duplication, we
can include fragments of increasing specificity in the
per-device .dts files such that the individual keys
(of which there are potentially hundreds) do not need to
be copied in for every device.
Add the initial set of SMC hwmon sensors that are common
to multiple devices so that they can be included in
the per-device Devicetrees.
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260714-smc-subdev-dt-v2-5-13fa78873121@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
