We are no longer keeping unreferences glocks around, so remove the
now-obsolete glock lru list and shrinker.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When we were still caching unreferenced glocks, evicting all the cached inodes
in gfs2_kill_sb() did put the unreferenced glocks onto the glock lru list, and
they would be freed in gfs2_gl_hash_clear(). We could set the
SDF_SKIP_DLM_UNLOCK flag in gfs2_gl_hash_clear() to indicate to gdlm_put_lock()
to skip unlocking glocks explicitly when possible. Now, glocks are demoted and
dropped immediately though, so to allow gdlm_put_lock() to skip unnecessary
unlocking, we need to set some "unmount" flag before calling
gfs2_evict_inodes(). We can use the existing SDF_KILL flag for that if we set
it before calling gfs2_evict_inodes() in gfs2_kill_sb().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Currently, gfs2 caches unreferenced glocks until memory pressure sets in or the
filesystem is unmounted. This was supposedly done to avoid excessive log
flushing: when a glock still has outstanding revokes, freeing it requires an
extra log flush, and we want to avoid too many of those extra log flushes.
Since commit 9287c6452d ("gfs2: Fix occasional glock use-after-free"),
outstanding revokes are accounted for in the glock reference count and glocks
with outstanding revokes will never be freed anymore, so this is no longer an
issue.
This also means that we won't need a glock LRU list anymore, but we leave
removing that list to a later patch for better readability.
It might seem that glocks that are not referenced anymore can be dropped
immediately without unlocking them first, but that isn't true for inode glocks
that have an address space attached (the "gfs2_glock(aspace)" slab cache): that
address space is only truncated when the associated glock is unlocked. So
unlock those glocks when they become unreferenced.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
All of the examiner functions passed to glock_hash_walk() can deal with glock
hash table resizes and the resulting repeat visiting of glocks, so we can allow
automatic glock hash table shrinking.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Alpha masks interrupts through the PAL IPL state, so lockdep cannot infer
hardirq state transitions from generic code alone. Add explicit
hardirq on/off annotations to the low-level entry and return paths so
lockdep's IRQ state follows the hardware IPL state.
Annotate the PAL IPL transitions and the shared return-to-user/kernel
paths where interrupts become enabled or disabled. With the preceding
irqflags, raw-lock, sysfs, and ftrace return-address preparations in
place, select LOCKDEP_SUPPORT and TRACE_IRQFLAGS_SUPPORT for Alpha.
This keeps CONFIG_PROVE_LOCKING usable on Alpha instead of disabling
debug_locks due to IRQ-state mismatches.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20260706170019.2941459-7-linmag7@gmail.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Some Alpha platform locks are used as low-level hardware serialization
locks in interrupt-controller and chipset access paths. These paths can
run while IRQ state is being changed or while lockdep is tracking that
state, so regular spinlock instrumentation is not appropriate once
lockdep is enabled.
Convert the affected Tsunami and Rawhide platform locks to
raw_spinlock_t. This keeps the locks as simple hardware serialization
locks and avoids lockdep recursion or IRQ-state mismatches when
CONFIG_PROVE_LOCKING is enabled.
This is a preparatory change for enabling lockdep hardirq state tracking
on Alpha.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20260706170019.2941459-6-linmag7@gmail.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Lockdep uses ftrace_return_address() to report useful call sites for
lock acquisition and IRQ-state tracking diagnostics. Provide the Alpha
architecture hook using the compiler return-address builtin when frame
pointers are available.
Return zero when frame pointers are disabled, matching the existing
fallback behavior of architectures that cannot provide a reliable return
address.
This is a preparatory change for enabling lockdep support on Alpha.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20260706170019.2941459-5-linmag7@gmail.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Alpha interrupt masking is controlled by the PAL IPL value, not by the
full processor status word. Make arch_local_save_flags() return the
current IPL directly, and make arch_local_irq_restore() and
arch_irqs_disabled_flags() treat their argument as IPL state.
Mask the low IPL bits in the restore and test helpers so callers which
still pass a saved PS value continue to behave as expected.
This prepares the irqflags helpers for lockdep IRQ-state tracking, where
the saved flags value is used to determine whether hard IRQs are enabled
or disabled.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20260706170019.2941459-4-linmag7@gmail.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Implement arch_stack_walk() for Alpha using a simple kernel
stack scanning walker. Start from regs+1 for current tasks
to skip pt_regs and use pcb.ksp for blocked tasks. Filter
candidates with __kernel_text_address() and stop at stack
bounds via kstack_end().
Enable CONFIG_STACKTRACE_SUPPORT and CONFIG_ARCH_STACKWALK
so generic stacktrace users (dump_stack(), /proc/*/stack,
SysRq backtraces, etc.) work on Alpha.
This provides functional in-kernel stack traces without
requiring frame pointer unwinding.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20260706170019.2941459-3-linmag7@gmail.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Add a user_regset_view for Alpha and switch ELF core dumping to
CORE_DUMP_USE_REGSET. General-purpose registers are exported in
ELF gregs layout, including callee-saved registers and a correct
user stack pointer.
The user stack pointer is not preserved in pt_regs on Alpha, so expose
it from the PCB, or via rdusp() for the current task, when building the
ELF register image. This makes the user stack pointer consistent for
core dumps, ptrace regsets, and PTRACE_GET_SYSCALL_INFO.
Implement regset get/set callbacks for both NT_PRSTATUS and NT_PRFPREG.
The callbacks translate between Alpha's pt_regs/thread state and the
ELF-visible register layouts, while the common ptrace regset code handles
PTRACE_GETREGSET and PTRACE_SETREGSET iovec semantics. This avoids
duplicating subtle short-buffer and oversized-buffer behavior in
arch_ptrace().
With these changes Alpha satisfies the requirements for
HAVE_ARCH_TRACEHOOK and selects it, enabling generic tracehook and
ptrace syscall-info code paths without changing the existing syscall
entry ABI.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20260706170019.2941459-2-linmag7@gmail.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
The recent switch to 64-bit MSR interfaces introduced a build warning.
Work it around with a __maybe_unused annotation. After the full conversion
of the APIs we'll be able to address this more robustly by making sure
the APIs consume all the values as far the compiler is concerned, so that
the compiler doesn't emit such nuisance warnings.
[ mingo: Updated the changelog. ]
Fixes: cff219368b ("x86/mce: Stop using 32-bit MSR interfaces")
Closes: https://lore.kernel.org/oe-kbuild-all/202607031726.ZOwu4snu-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20260703105555.1758819-1-jgross@suse.com
- Fix checksum lib on machines without the vector facility where the
non-vector fallback made csum_partial() calculate the checksum from
address 0 instead of the provided buffer
- Fix cpum_cf perf event initialization missing speculation barrier for
user controlled event numbers used as generic event array indexes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmpcDpgACgkQjYWKoQLX
FBizogf/fOTDdmXPx2xp5PFadlaoVnRmycslrPDog+lVp2tl+RXlAU6mKT27gcXT
2G/PCF9SjYQSQdGztMNPCh6Az1cAo+XvhADtElumRAjlybTYlk++aallv5+buHRS
Z2jEnurYVWQaQP/PpFDIUhh7Yf6ggrctXuRdYgyJv/5Siy4OQYQEpWQazQXyfOZI
506gQ2M4mD8dIJRgZygM7tQztR7K8IFDIUPzxMCiBKj9XQQBpZ0Q9SOm07nL6dtS
MHcXbyd80XbvVoYNCZHquktJ4ZOvru+sA65Hd94TSHOQRDxuuiDueo6VYPPqBX5o
/ENY4mFt0aD7m0lbTqMyxrUI2bDzLg==
=WPyD
-----END PGP SIGNATURE-----
Merge tag 's390-7.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix checksum lib on machines without the vector facility where the
non-vector fallback made csum_partial() calculate the checksum from
address 0 instead of the provided buffer
- Fix cpum_cf perf event initialization missing speculation barrier for
user controlled event numbers used as generic event array indexes
* tag 's390-7.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init()
s390/checksum: Fix csum_partial() without vector facility
The GCC GDSCs on Glymur are backed by the RPMh CX power domain. Without
describing that parent domain, consumers of GCC-provided GDSCs can enable
their local domain without causing the required CX vote to be held.
Add the CX power-domain reference to the GCC node so votes from GCC GDSC
consumers can propagate to RPMh CX.
Fixes: 41b6e8db40 ("arm64: dts: qcom: Introduce Glymur base dtsi")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260715-glymur-fix-gcc-cx-scaling-v3-3-72eb5adad156@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
According to user manual / programming guide there is no separate PCIe
phy 3A and 3B, but one 8-lane QMP PCIe Gen5 PHY which consists of two
4-lane blocks. This is also visible in memory map, where the 0xf00000
is marked as the main block with additional sub blocks for each 4-lane
phys.
Describing the sub phys without the rest is not correct from hardware
description, even if it works.
Link: https://lore.kernel.org/r/20260420-optimistic-unnatural-stingray-80da35@quoll/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260609141608.354186-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Glymur has a True Random Number Generator, add the node with the correct
compatible set.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Tested-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260424-glymur_trng_enablement-v2-2-0603cbe68440@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Embedded Trace Router(ETR) is working as a DDR memory sink to collect
tracing data from source device and the CTCU device serves as the
control unit for the ETR device.
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260714-add-ctcu-etr-for-glymur-v1-1-791de63c0713@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Centrally define the endpoints to let device DTs that describe PCIe
devices and/or M.2 connectors refer to them without error-prone
duplication.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260716-topic-smb2370_port2-v1-2-83d02b2ba4b0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It's absent on laptops that only have 2 type-C ports (the majority so
far, including the CRD). Keep it disabled by default, following
established practice from the previous generation.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260716-topic-smb2370_port2-v1-1-83d02b2ba4b0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Reject firmware section TLVs that are shorter than the offset field
before subtracting sizeof(offset) from the section size.
This prevents size underflow for malformed TLVs.
Assisted-by: GitHubCopilot:GPT-5.3-Codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260717173215.17b040b27edc.I6b32d1e9ad707417e2e604f08a63582456209372@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
The biggest core change is the reliable wake fix for scsi_schedule_eh
which is used by both libata and libsas which could otherwise cause
error handler hangs due to rare races. All other fixes are in drivers
(well except the export symbol removal) the next biggest being the
target PR-OUT transportid parsing fix.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCalvAVRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIUI/QD+Kr/rBo60RkNJfsdC6vmHj0+pkkSpQNkM
XGTZXjPz+poBAL7ybOwWvQWYoJ2LLDg10F9dSb68DxE2FJAS3lzM0IGf
=dhtX
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The biggest core change is the reliable wake fix for scsi_schedule_eh
which is used by both libata and libsas which could otherwise cause
error handler hangs due to rare races.
All other fixes are in drivers (well except the export symbol removal)
the next biggest being the target PR-OUT transportid parsing fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hpsa: Fix DMA mapping leak on IOACCEL2 reset path
scsi: elx: efct: Fix refcount leak in efct_hw_io_abort()
scsi: elx: efct: Fix I/O leak on unsupported additional CDB
scsi: core: wake eh reliably when using scsi_schedule_eh
scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE
scsi: target: Bound PR-OUT TransportID parsing to the received buffer
scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup()
scsi: sg: Report request-table problems when any status is set
scsi: ufs: core: tracing: Do not dereference pointers in TP_printk()
scsi: bfa: Reduce kernel stack usage in bfa_fcs_lport_fdmi_build_portattr_block()
scsi: xen: scsiback: Free the command tag on the TMR submit-failure path
scsi: xen: scsiback: Free unsubmitted command instead of double-putting it
scsi: core: Remove export for scsi_device_from_queue()
The ceiling-division idiom `(n + d - 1) / d` only produces the
correct result when `n` is non-negative.
For example, if n = -1000 (exactly -1us), the old code computed (-1000
+ 999) / 1000 == 0 instead of -1.
For negative n, truncating division already rounds towards positive
infinity, so no bias is needed in that case.
Fixes: fae0cdc123 ("rust: time: Introduce Delta type")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260713225235.3243480-1-tomo@flapping.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
imx: fix empty SMBus block reads in atomic and IRQ paths
spacemit: return IRQ_NONE for empty interrupt status
mlxbf: fix a use-after-free issue
mediatek: restore WRRD support without automatic restart
CREDITS: add Wolfram Sang
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaltX3AAKCRDaeAVmJtMt
bqqgAPsFCe+3Y/71UNBWzOEI99zUlyFu7OH7Rt/015HVXsmelgEAjkQ0X5RX2Njg
AswoeT+OGvxxVxlNeNMMrxAM4s6caQU=
=yKh8
-----END PGP SIGNATURE-----
Merge tag 'i2c-fixes-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull i2c fixes from Andi Shyti:
"A handful of small fixes for host controller drivers.
One patch also adds Wolfram Sang to CREDITS after more than a decade
of work on I2C"
* tag 'i2c-fixes-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: mediatek: fix WRRD for SoCs without auto_restart option
i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource()
i2c: spacemit: fix spurious IRQ handling returning IRQ_HANDLED
i2c: imx: fix locked bus on SMBus block-read of 0 (IRQ)
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
CREDITS: Add Wolfram Sang
Replace the open-coded optional axi clock get/prepare/enable and the
manual cleanup in probe/remove/runtime_resume with the managed helper
devm_clk_get_optional_enabled(). This removes the now-unused
out_rel_axi_clk error path and simplifies the clock lifecycle.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260716231411.1737001-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HP Pavilion x360 sets a bogus PCI SSID (103c:0000), hence the driver
picks up a wrong quirk entry, resulting in an almost silent output.
And yet, the existing quirk for x390 doesn't seem sufficing, and we
need the extra setup for the amp.
This patch adds the quirk entry for the codec SSID (103c:8486) to
initialize the amp via COEF verbs and chains to the existing quirk for
another x360 model to address the silent output.
Closes: https://lore.kernel.org/CAF2ktaUW2oaWwGazGtJQ3o1JyE2R4O2xPd-Dchr=qqi7_QRruQ@mail.gmail.com
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260716064916.540616-1-tiwai@suse.de
Root enable and scx_post_fork() enable a task only if it's on the ext class.
Tasks on other classes, possible under an SCX_OPS_SWITCH_PARTIAL root, are
left READY and enabled by switching_to_scx() when they switch over. The sub
enable-commit pass and the sub-disable re-home loop enable unconditionally,
so a fair-class READY task in the subtree becomes ENABLED while not on
sched_ext. A later switch to SCHED_EXT then trips the task state validation
WARN (ENABLED with the previous state not READY) and calls ops.enable() a
second time.
Gate scx_enable_task() on the task's class in both loops.
Fixes: 337ec00b1d ("sched_ext: Implement cgroup sub-sched enabling and disabling")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A sub-scheduler enable can fail before scx_link_sched() links the sched into
the hierarchy, e.g. when the parent is already being disabled, and cleanup
still runs the full scx_sub_disable().
That is racy against root disable: drain_descendants() is the only ordering
between a sub's disable-time task walk and root disable's all-task teardown,
and an unlinked sub is invisible to it. Root's teardown can thus run between
the never-linked sub's drain and its walk, exiting every task to no
scheduler.
The walk then trips the membership WARN and re-homes the exited tasks onto
the dying hierarchy, a use-after-free.
Skip the cgroup ownership reset and the task walk if @sch was never linked,
indicated by the empty ->sibling as unlinking only happens later in the same
function. The membership WARN remains valid: a linked sub is always waited
on by an ancestor's drain.
Fixes: 337ec00b1d ("sched_ext: Implement cgroup sub-sched enabling and disabling")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_cgroup_lock() write-locks scx_cgroup_ops_rwsem and then takes
cgroup_lock(), which can deadlock through kernfs:
scx enable/disable cgroup rmdir cpu.weight write
------------------ ------------ ----------------
cgroup_lock()
percpu_down_write(rwsem)
cgroup_lock()
kernfs_get_active()
percpu_down_read(rwsem)
kernfs_drain()
The enable path waits for the rmdir to release cgroup_mutex. The rmdir,
deactivating the cpu controller's files, waits in kernfs_drain() for the
write's active reference. The write, in scx_group_set_weight(), waits for
the rwsem behind the pending writer.
Take cgroup_lock() first. The set_* paths take no cgroup locks inside the
read side, so a pending write-lock then only waits for read sections that
always run to completion, and no dependency from the rwsem back to
cgroup_mutex remains.
Fixes: a5bd6ba30b ("sched_ext: Use cgroup_lock/unlock() to synchronize against cgroup operations")
Cc: stable@vger.kernel.org # v6.18+
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The p->scx.disallow revert assumes the root enable path, where the switching
loop reads the reverted policy right afterwards and leaves the task off SCX.
The sub-scheduler disable path also reaches it when re-initializing the
returned tasks on a root parent. Nothing reads the policy there: the task is
enabled on root anyway and keeps running on the ext class with a silently
rewritten policy.
Kill the sched instead, matching the fork and non-root branches, and update
the disallow documentation, which equated !fork with the load path and
pointed at a stale debugfs path for nr_rejected.
Fixes: 337ec00b1d ("sched_ext: Implement cgroup sub-sched enabling and disabling")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
-----BEGIN PGP SIGNATURE-----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=K5Ks
-----END PGP SIGNATURE-----
Merge tag 'v7.2-rc3-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"ksmbd server fixes, mostly addressing malformed SMB request
handling and connection/session lifetime issues, including
two information-disclosure or memory-safety bugs in the SMB2
request/response paths.
- validate FILE_ALLOCATION_INFORMATION before block rounding to
prevent a client-controlled overflow from truncating a file.
- pin connections while asynchronous oplock and lease-break
notifications are pending.
- initialize compound SMB2 READ alignment padding, preventing
disclosure of uninitialized heap bytes.
- release the allocated alternate-stream xattr name after rename.
- size multichannel binding session-key buffers for the largest
permitted key, avoiding a stack buffer overflow.
- remove a disconnecting connection's channels from every session,
including channels whose binding state has since changed.
- serialize binding preauthentication-session lookup and update
against its teardown.
- check that every compound request element contains StructureSize2
before reading it"
* tag 'v7.2-rc3-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate compound request size before reading StructureSize2
ksmbd: lock the binding preauth session in smb3_preauth_hash_rsp
ksmbd: remove stale channels from all sessions on teardown
ksmbd: fix stack buffer overflow in multichannel session-key copy
ksmbd: fix memory leak of xattr_stream_name in smb2_rename()
ksmbd: zero the smb2_read alignment tail to avoid an infoleak
ksmbd: pin conn during async oplock break notification
ksmbd: fix integer overflow in set_file_allocation_info()
On phy_init() failure the error path fallsthrough to disable_rsts, which
deasserts the controller reset and then enters disable_phys calling
phy_power_off() on PHYs that were never powered on. That corrupts the PHY
power_count and triggers an extra runtime PM put.
Use a separate exit_phys path that unwinds with phy_exit() only and falls
through to disable_clks while the controller remains in reset. Reserve
phy_power_off() for the phy_power_on() failure path only, and skip
masked-out ports in both unwind loops.
On phy_power_on() failure re-assert the controller reset before disabling
clocks and regulators, matching the teardown order used by
ahci_platform_enable_resources() and ahci_platform_disable_resources().
Fixes: 26c8404e16 ("ata: ahci_ceva: fix error handling for Xilinx GT PHY support")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Board files in arch/arm/plat-orion, arch/arm/mach-dove,
arch/arm/mach-mv78xx0 and arch/arm/mach-orion5x still register the
"sata_mv" device with two resources (IORESOURCE_MEM plus IORESOURCE_IRQ).
Those devices are rejected with -EINVAL, so SATA no longer probes on
legacy Marvell Orion/Kirkwood-style boards.
Accept both 1 resource (DT, IRQ fetched via platform_get_irq()) and 2
resources (legacy, IRQ supplied as a second resource) so both probing
paths work.
Fixes: b3b2bec964 ("ata: sata_mv: Fixes expected number of resources now IRQs are gone")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
When creating a WSL special file (socket, fifo, character or block
device), __ntfs_create() sets FILE_ATTRIBUTE_RECALL_ON_OPEN in ni->flags
as valid_reparse_data() requires for these tags. This flag is
intentionally absent from $FILE_NAME, so the subsequent reload
ni->flags = fn->file_attributes;
drops it from ni->flags, the authoritative copy written back to
$STANDARD_INFORMATION. The on-disk file_attributes becomes 0x00000404
instead of 0x00040404, and after a remount valid_reparse_data() rejects
the reparse point while fsck reports "$REPARSE_POINT data is corrupted".
Preserve the RECALL_ON_OPEN bit across the reload. Symlinks do not set
that bit, so they are unaffected.
Fixes: af0db57d42 ("ntfs: update inode operations")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
- Interrupt initialization and handling Fixes for the Designware
ahci_dwc driver (Rosen)
- Avoid possible infinite loop when scanning completion in the
Designware ahci_dwc driver (Rosen)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCalrPMQAKCRDdoc3SxdoY
dnQ3AP9NaxQu5xoACQtFtNPb8CyY35CRclAKZsKk+/clCNAVwwEAuUo2rgw/eAfP
w98ZEvN1HMRqW4dbatv2d3zNw2L8Iw8=
=9+gW
-----END PGP SIGNATURE-----
Merge tag 'ata-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Interrupt initialization and handling fixes for the Designware
ahci_dwc driver (Rosen)
- Avoid possible infinite loop when scanning completion in the
Designware ahci_dwc driver (Rosen)
* tag 'ata-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning
ata: sata_dwc_460ex: fix clear_interrupt_bit() clearing all pending interrupts
ata: sata_dwc_460ex: use platform_get_irq()
ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered
On Shikra, the DDR System Firmware (DSF) configures ECC interrupt
routing before the kernel driver probes — it enables Tag/Data RAM
interrupts and programs error thresholds in the LLCC interrupt-enable
registers.
Set irq_configured in shikra_cfg so that qcom_llcc_edac_probe() skips
calling qcom_llcc_core_setup(), which would otherwise overwrite the
firmware-managed register state with redundant writes.
Signed-off-by: Faiyaz Mohammed <faiyaz.mohammed@oss.qualcomm.com>
Reviewed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260713-shikra-edac-v2-1-22fcb3ca9fb9@qti.qualcomm.com
[bjorn: Changed subject prefix]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Now that proper fixes have been found, let's revert this workaround.
This reverts commit a1fc7bf667.
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f64a9be565)
Cc: stable@vger.kernel.org # 8382cd2349: drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock
Cc: stable@vger.kernel.org # 48ab86360a: drm/amd/display: check GRPH_FLIP status before sending event
Cc: stable@vger.kernel.org
[Why]
After unifying DCN interrupt sources under VUPDATE_NO_LOCK, we have two
remaining issues to clean up:
1. On DCN, flip completion is now delivered from VUPDATE_NO_LOCK
(dm_crtc_high_irq_handler) instead of GRPH_PFLIP. But VUPDATE_NO_LOCK
fires every frame, regardless of whether a flip has latched.
2. There is a window during commit where a flip is armed (pflip_status =
SUBMITTED) but not yet programmed into HW. If the VUPDATE_NO_LOCK
fires in that window, its handler would deliver a flip event to
userspace before HW has latched to it. If userspace then renders to
what it believes is now the back buffer (but HW is still latched to
it!), it will cause display corruption. This issue seemed to have
been introduced by:
commit 1159898a88 ("drm/amd/display: Handle commit plane with no FB.")
Enabling replay or psr extended the duration of this window, and
hence made corruption more likely to be observed.
[How]
* Move acrtc->event/pflip_status arming to after
update_planes_and_stream_adapter() has programmed the flip into HW.
This closes the window where pflip_status is SUBMITTED but the flip is
not yet programmed.
* Add dc_get_flip_pending_on_otg(), which reads the HUBP flip-pending
status straight from HW for the pipe(s) bound to an OTG instance. It
is keyed only by otg_inst and does not take or mutate a
dc_plane_state, so it is safe to call from the OTG interrupt handler
without racing a concurrent commit that may be modifying plane state.
* Optimistically query for flip-pending after programming, in the event
that HW latched to the new fb between programming start and arming
event. If it latched, send the vblank event immediately, rather than
wait for the next vblank IRQ.
* In the VUPDATE_NO_LOCK handler, only deliver flip completion once
dc_get_flip_pending_on_otg() reports the flip is no longer pending.
Otherwise leave the flip armed and retry on the next vupdate.
* For DCE, maintain the existing behavior of arming flips before
programming, and relying on GRPH_FLIP to fire at HW latch.
v2:
* Drop flip_programmed completion object, instead move
event/pflip_status arming after programming.
* For DCN, optimistically query for flip pending immediately after
programming, and if it latched, send event right away.
v3:
* Fix event timestamps on optimistic flip latch detection, where it's
possible for it to run *before* the vupdate IRQ updates the timestamp.
* Add more docstrings for DCN vblank handling.
* Clean up if conditions in dm_arm_vblank_event().
* Code style cleanup on braces surrounding multi-line statements.
Fixes: 9b47278cec ("drm/amd/display: temp w/a for dGPU to enter idle optimizations")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/3787
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141
Assisted-by: Copilot:claude-opus-4.8
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f64a9be565)
Cc: stable@vger.kernel.org # 8382cd2349: drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock
Cc: stable@vger.kernel.org
[Why]
On DCN, vblank events were delivered from VSTARTUP/VUPDATE
(dm_crtc_high_irq/dm_vupdate_high_irq) and pageflip completion from
GRPH_PFLIP (dm_pflip_high_irq). These signals can be masked by hardware
by a few things:
* DPG - DCN can Dynamically Power Gate parts of the display pipe when a
self-refresh capable eDP is connected. DPG is engaged when there's
enough static frames (detected through drm_vblank_off). Once gated,
even though the OTG (output timing generator) is still enabled,
VSTARTUP and GRPH_FLIP are masked.
* GSL - Driver can use the Global Sync Lock to block HW from latching
onto double-buffered registers during programming, to prevent HW from
latching onto a partially programmed state. This will mask VSTARTUP,
GRPH_FLIP, and VUPDATE. See dcn20_pipe_control_lock().
* MALL - A DCN accessible cache introduced in DCN32+ DGPUs that can
store fb data to allow for longer DRAM sleep. When scanning out from
MALL, VSTARTUP is masked.
When masked, events are never delivered, which can show up as flip_done
timeouts in the wild.
However, there is an interrupt source on DCN that is never masked:
VUPDATE_NO_LOCK. It's simply an unmasked variant of VUPDATE, which fires
while the OTG is active, at the exact point hardware latches
double-buffered registers. It is therefore the natural single signal for
delivering both vblank and flip-completion events on DCN, and the
correct point to timestamp both VRR and non-VRR vblanks.
DCE's interrupt sources are different, it does not have an unmaskable
VUPDATE_NO_LOCK. The only unmaskable DCE interrupt is VLINE0, but it can
only be programmed as a vline offset from vsync_start, making it
unsuitable for VRR. Thus, we keep DCE untouched and use the existing mix
of interrupt sources.
[How]
For DCN1 and newer only:
* Factor the body of dm_crtc_high_irq() into dm_crtc_high_irq_handler()
and drive it from dm_vupdate_high_irq() (VUPDATE_NO_LOCK). DCE keeps
using dm_crtc_high_irq() (VSTARTUP) and dm_pflip_high_irq()
(GRPH_PFLIP) unchanged.
* Stop registering VSTARTUP (crtc_irq) and GRPH_PFLIP (pageflip_irq) on
DCN, and stop enabling them in amdgpu_dm_crtc_set_vblank() /
manage_dm_interrupts(). Enable VUPDATE whenever vblank is enabled on
DCN (previously only in VRR mode). The secure-display vline0 interrupt
is left untouched.
* VUPDATE_NO_LOCK does not early-fire on an immediate (tearing / async)
flip, since HW latches the new address right away. Deliver the flip
completion event immediately after programming such flips in
amdgpu_dm_commit_planes(), and clear pflip_status so the next vupdate
handler does not double-send.
v2: Do not gate VUPDATE_NO_LOCK on DCN in dm_handle_vrr_transition()
Also toggle VUPDATE_NO_LOCK on DCN in dm_gpureset_toggle_interrupts()
Re-cook vblank event count and timestamp for immediate flips
Fixes: 9b47278cec ("drm/amd/display: temp w/a for dGPU to enter idle optimizations")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/3787
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141
Assisted-by: Copilot:claude-opus-4.8
Co-developed-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c87e6635d2)
Cc: stable@vger.kernel.org
Some AMD APU multi-function devices expose an integrated USB xHCI
controller. In some circumstances (such as larger VRAM), the PM core
can resume can fail when the xHCI controller is resuming in parallel
with the GPU/display function.
On affected systems, the xHCI controller can complete pci_pm_resume
and start resuming USB devices while the GPU is still in its much
longer resume path. This race condition leads to USB device resume
failures followed by:
xhci_hcd ...: xHCI host not responding to stop endpoint command
xhci_hcd ...: HC died; cleaning up
Create a device link from any xHCI controller sharing the same PCIe
root port as the APU display function. The link uses DL_FLAG_STATELESS
and DL_FLAG_PM_RUNTIME to ensure the GPU completes its resume before
the xHCI controller begins resuming USB devices.
This device link is done specifically in amdgpu so that if the
platform firmware has been modified such that this issue doesn't happen
the version can be detected and the workaround skipped.
Suggested-by: Aaron Ma <aaron.ma@canonical.com>
Reported-by: mrh@frame.work
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221073
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Alexander F <superveridical@gmail.com>
Tested-by: Francis DB <francisdb@gmail.com>
Link: https://patch.msgid.link/20260713195313.1739762-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 07c93d7eeb)
Cc: stable@vger.kernel.org
DCN42B enables DML2 and DML21 by default and defines
dcn42b_prepare_mcache_programming(), but the resource function table only
wires the callback when CONFIG_DRM_AMD_DC_DML21 is defined.
There is no in-tree Kconfig symbol named DRM_AMD_DC_DML21, so the
preprocessor always removes the callback entry. Sibling DCN42 and DCN401
resource tables wire their prepare_mcache_programming callbacks
unconditionally, and the core DC code already checks whether the callback
pointer is present before calling it.
Remove the stale guard so DCN42B exposes the callback relation that its
source and DML21 build world already provide.
This is an RFC patch draft from static conditional callback legality
auditing. It needs AMD display maintainer review before submission as a
final fix.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 85453fb4ff)
In dm_update_crtc_state(), the skip_modeset path releases new_stream
via dc_stream_release() but does not set the pointer to NULL.
If a later error (e.g., color management failure) triggers the fail
label, the error path calls dc_stream_release() again on the same
dangling pointer, causing a double release and potential use-after-free.
Fix this by setting new_stream to NULL after the initial release.
Fixes: 9b690ef3c7 ("drm/amd/display: Avoid full modeset when not required")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99f3af1907)
Cc: stable@vger.kernel.org
The Lenovo Legion 5 15ARH05 (Renoir) ships a BOE 0x08DF eDP panel that
advertises AUX/DPCD backlight control, so amdgpu's automatic detection
(amdgpu_backlight == -1) selects AUX. On this panel the AUX backlight
path has no effect: brightness writes are accepted but the panel level
never changes, the display is stuck at a fixed brightness and
max_brightness is reported as a bogus 511000. As a result neither the
desktop brightness slider nor the brightness hotkeys do anything.
Forcing PWM backlight (amdgpu.backlight=0) restores working control:
max_brightness becomes 65535 and the level tracks writes. This has long
been applied by users as a manual kernel-parameter workaround.
Extend the generic panel backlight quirk with a force_pwm flag, add an
entry for the Legion 5 15ARH05 / BOE 0x08DF panel, and have amdgpu
disable AUX backlight (use PWM) when the quirk matches and the user
lets the driver auto-select the backlight type.
Signed-off-by: Alessandro Rinaldi <ale@alerinaldi.it>
Tested-by: Alessandro Rinaldi <ale@alerinaldi.it>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 81b39f43e7)
Cc: stable@vger.kernel.org
