[ Upstream commit ae014fbc99 ]
On RZ/G2LC SMARC EVK, CAN-FD channel0 is not populated, and currently we
are deleting a wrong and nonexistent node. Fixing the wrong node would
invoke a dtb warning message, as channel0 is a required property.
Disable CAN-FD channel0 instead of deleting the node.
Fixes: 46da632734 ("arm64: dts: renesas: rzg2lc-smarc: Enable CANFD channel 1")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250801121959.267424-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8912b2862b ]
rzg3s_oen_read() returns a u32 value, but previously propagated a negative
error code from rzg3s_pin_to_oen_bit(), resulting in an unintended large
positive value due to unsigned conversion. This caused incorrect
output-enable reporting for certain pins.
Without this patch, pins P1_0-P1_4 and P7_0-P7_4 are incorrectly reported
as "output enabled" in the pinconf-pins debugfs file. With this fix, only
P1_0-P1_1 and P7_0-P7_1 are shown as "output enabled", which matches the
hardware manual.
Fix this by returning 0 when the OEN bit lookup fails, treating the pin
as output-disabled by default.
Fixes: a9024a323a ("pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250709160819.306875-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d83ed6c6c ]
Since the support of bs < ps support, extent_writepage_io() will submit
multiple blocks inside the folio.
But if we hit error submitting one sector, but the next sector can still
be submitted successfully, the function extent_writepage_io() will still
return 0.
This will make btrfs to silently ignore the error without setting error
flag for the filemap.
Fix it by recording the first error hit, and always return that value.
Fixes: 8bf334beb3 ("btrfs: fix double accounting race when extent_writepage_io() failed")
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54d94c422f ]
When CONFIG_SECURITY is not set, CONFIG_LSM (builtin_lsm_order) does
not need to be visible and settable since builtin_lsm_order is defined in
security.o, which is only built when CONFIG_SECURITY=y.
So make CONFIG_LSM depend on CONFIG_SECURITY.
Fixes: 13e735c0e9 ("LSM: Introduce CONFIG_LSM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[PM: subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac9c408ed1 ]
RDPID instruction outputs to a word-sized register (64-bit on x86_64 and
32-bit on x86_32). Use an unsigned long variable to store the correct size.
LSL outputs to 32-bit register, use %k operand prefix to always print the
32-bit name of the register.
Use RDPID insn mnemonic while at it as the minimum binutils version of
2.30 supports it.
[ bp: Merge two patches touching the same function into a single one. ]
Fixes: ffebbaedc8 ("x86/vdso: Introduce helper functions for CPU and node number")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250616095315.230620-1-ubizjak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e6fe1bbef ]
When loading the i10nm_edac driver on some Intel Granite Rapids servers,
a call trace may appear as follows:
UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c:453:16
shift exponent -66 is negative
...
__ubsan_handle_shift_out_of_bounds+0x1e3/0x390
skx_get_dimm_info.cold+0x47/0xd40 [skx_edac_common]
i10nm_get_dimm_config+0x23e/0x390 [i10nm_edac]
skx_register_mci+0x159/0x220 [skx_edac_common]
i10nm_init+0xcb0/0x1ff0 [i10nm_edac]
...
This occurs because some BIOS may disable a memory controller if there
aren't any memory DIMMs populated on this memory controller. The DIMMMTR
register of this disabled memory controller contains the invalid value
~0, resulting in the call trace above.
Fix this call trace by skipping DIMM enumeration on a disabled memory
controller.
Fixes: ba987eaaab ("EDAC/i10nm: Add Intel Granite Rapids server support")
Reported-by: Jose Jesus Ambriz Meza <jose.jesus.ambriz.meza@intel.com>
Reported-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Closes: https://lore.kernel.org/all/20250730063155.2612379-1-acelan.kao@canonical.com/
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20250806065707.3533345-1-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fad988a215 ]
Already do real negotiation in smb_direct_handle_connect_request()
where we see the requested initiator_depth and responder_resources
from the client.
We should detect legacy iwarp clients using MPA v1
with the custom IRD/ORD negotiation.
We need to send the custom IRD/ORD in big endian,
but we need to try to let clients with broken requests
using little endian (older cifs.ko) to work.
Note the reason why this uses u8 for
initiator_depth and responder_resources is
that the rdma layer also uses it.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: linux-rdma@vger.kernel.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a29fea30dd ]
Cast nr_pages to unsigned long to avoid overflow when handling large
AUX buffer sizes (>= 2 GiB).
Fixes: d5d9696b03 ("drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 105f56877f ]
Cast nr_pages to unsigned long to avoid overflow when handling large
AUX buffer sizes (>= 2 GiB).
Fixes: 3fbf7f011f ("coresight: sink: Add TRBE driver")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba1afc94de ]
uprobe_warn() is passed a task structure, yet its using current. For
the most part this shouldn't matter, but since a task structure is
provided, lets use it.
Fixes: 248d3a7b2f ("uprobes: Change uprobe_copy_process() to dup return_instances")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2863371f0 ]
Commit 82ef440f9a ("powerpc/603: Copy kernel PGD entries into all
PGDIRs and preallocate execmem page tables") was supposed to extend
to powerpc 603 the copy of kernel PGD entries into all PGDIRs
implemented in a previous patch on the 8xx. But 603 is book3s/32 and
uses a duplicate of pgd_alloc() defined in another header.
So really do the copy at the correct place for the 603.
Fixes: 82ef440f9a ("powerpc/603: Copy kernel PGD entries into all PGDIRs and preallocate execmem page tables")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/752ab7514cae089a2dd7cc0f3d5e35849f76adb9.1755757797.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9e46de4bf ]
Commit ac9f97ff8b ("powerpc/8xx: Inconditionally use task PGDIR in
DTLB misses") removed the test that needed the valeur in SPRN_EPN but
failed to remove the read.
Remove it.
And remove related comments, including the very same comment
in InstructionTLBMiss that should have been removed by
commit 33c527522f ("powerpc/8xx: Inconditionally use task PGDIR in
ITLB misses").
Also update the comment about absence of a second level table which
has been handled implicitely since commit 5ddb75cee5 ("powerpc/8xx:
remove tests on PGDIR entry validity").
Fixes: ac9f97ff8b ("powerpc/8xx: Inconditionally use task PGDIR in DTLB misses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/5811c8d1d6187f280ad140d6c0ad6010e41eeaeb.1755361995.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 061df28b82 ]
Commit 865cc3e9cc ("gfs2: fix a deadlock on withdraw-during-mount")
added a statement to do_xmote() to clear the GLF_INVALIDATE_IN_PROGRESS
flag a second time after it has already been cleared. Fix that.
Fixes: 865cc3e9cc ("gfs2: fix a deadlock on withdraw-during-mount")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a679e5683d ]
Fix -Wunused-result warning generated when compiled with gcc 13.3.0,
by checking fread's return value and handling errors, preventing
potential failures when reading from stdin.
Fixes compiler warning:
warning: ignoring return value of 'fread' declared with attribute
'warn_unused_result' [-Wunused-result]
Fixes: 806a15b254 ("kselftests/arm64: add PAuth test for whether exec() changes keys")
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cce436aafc ]
Normally the tracee starts in SECCOMP_NOTIFY_INIT, sends an
event to the tracer, and starts to wait interruptibly. With
SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV, if the tracer receives the
message (SECCOMP_NOTIFY_SENT is reached) while the tracee was waiting
and is subsequently interrupted, the tracee begins to wait again
uninterruptibly (but killable).
This fails if SECCOMP_NOTIFY_REPLIED is reached before the tracee
is interrupted, as the check only considered SECCOMP_NOTIFY_SENT as a
condition to begin waiting again. In this case the tracee is interrupted
even though the tracer already acted on its behalf. This breaks the
assumption SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV wanted to ensure,
namely that the tracer can be sure the syscall is not interrupted or
restarted on the tracee after it is received on the tracer. Fix this
by also considering SECCOMP_NOTIFY_REPLIED when evaluating whether to
switch to uninterruptible waiting.
With the condition changed the loop in seccomp_do_user_notification()
would exit immediately after deciding that noninterruptible waiting
is required if the operation already reached SECCOMP_NOTIFY_REPLIED,
skipping the code that processes pending addfd commands first. Prevent
this by executing the remaining loop body one last time in this case.
Fixes: c2aa2dfef2 ("seccomp: Add wait_killable semantic to seccomp user notifier")
Reported-by: Ali Polatel <alip@chesswob.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220291
Signed-off-by: Johannes Nixdorf <johannes@nixdorf.dev>
Link: https://lore.kernel.org/r/20250725-seccomp-races-v2-1-cf8b9d139596@nixdorf.dev
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7479260860 ]
INITRAMFS_PRESERVE_MTIME is only used in init/initramfs.c and
init/initramfs_test.c. Hence add a dependency on BLK_DEV_INITRD, to
prevent asking the user about this feature when configuring a kernel
without initramfs support.
Fixes: 1274aea127 ("initramfs: add INITRAMFS_PRESERVE_MTIME Kconfig option")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e750f85391 upstream.
When completing emulation of instruction that generated a userspace exit
for I/O, don't recheck L1 intercepts as KVM has already finished that
phase of instruction execution, i.e. has already committed to allowing L2
to perform I/O. If L1 (or host userspace) modifies the I/O permission
bitmaps during the exit to userspace, KVM will treat the access as being
intercepted despite already having emulated the I/O access.
Pivot on EMULTYPE_NO_DECODE to detect that KVM is completing emulation.
Of the three users of EMULTYPE_NO_DECODE, only complete_emulated_io() (the
intended "recipient") can reach the code in question. gp_interception()'s
use is mutually exclusive with is_guest_mode(), and
complete_emulated_insn_gp() unconditionally pairs EMULTYPE_NO_DECODE with
EMULTYPE_SKIP.
The bad behavior was detected by a syzkaller program that toggles port I/O
interception during the userspace I/O exit, ultimately resulting in a WARN
on vcpu->arch.pio.count being non-zero due to KVM no completing emulation
of the I/O instruction.
WARNING: CPU: 23 PID: 1083 at arch/x86/kvm/x86.c:8039 emulator_pio_in_out+0x154/0x170 [kvm]
Modules linked in: kvm_intel kvm irqbypass
CPU: 23 UID: 1000 PID: 1083 Comm: repro Not tainted 6.16.0-rc5-c1610d2d66b1-next-vm #74 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:emulator_pio_in_out+0x154/0x170 [kvm]
PKRU: 55555554
Call Trace:
<TASK>
kvm_fast_pio+0xd6/0x1d0 [kvm]
vmx_handle_exit+0x149/0x610 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xda8/0x1ac0 [kvm]
kvm_vcpu_ioctl+0x244/0x8c0 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0x5d/0xc60
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Reported-by: syzbot+cc2032ba16cc2018ca25@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68790db4.a00a0220.3af5df.0020.GAE@google.com
Fixes: 8a76d7f25f ("KVM: x86: Add x86 callback for intercept check")
Cc: stable@vger.kernel.org
Cc: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250715190638.1899116-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 674b56aa57 upstream.
Syzkaller reports a KASAN issue as below:
general protection fault, probably for non-canonical address 0xfbd59c0000000021: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0xdead000000000108-0xdead00000000010f]
CPU: 0 PID: 5083 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00037-g855bd1d7d838 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:__list_del include/linux/list.h:114 [inline]
RIP: 0010:__list_del_entry include/linux/list.h:137 [inline]
RIP: 0010:list_del include/linux/list.h:148 [inline]
RIP: 0010:p9_fd_cancelled+0xe9/0x200 net/9p/trans_fd.c:734
Call Trace:
<TASK>
p9_client_flush+0x351/0x440 net/9p/client.c:614
p9_client_rpc+0xb6b/0xc70 net/9p/client.c:734
p9_client_version net/9p/client.c:920 [inline]
p9_client_create+0xb51/0x1240 net/9p/client.c:1027
v9fs_session_init+0x1f0/0x18f0 fs/9p/v9fs.c:408
v9fs_mount+0xba/0xcb0 fs/9p/vfs_super.c:126
legacy_get_tree+0x108/0x220 fs/fs_context.c:632
vfs_get_tree+0x8e/0x300 fs/super.c:1573
do_new_mount fs/namespace.c:3056 [inline]
path_mount+0x6a6/0x1e90 fs/namespace.c:3386
do_mount fs/namespace.c:3399 [inline]
__do_sys_mount fs/namespace.c:3607 [inline]
__se_sys_mount fs/namespace.c:3584 [inline]
__x64_sys_mount+0x283/0x300 fs/namespace.c:3584
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
This happens because of a race condition between:
- The 9p client sending an invalid flush request and later cleaning it up;
- The 9p client in p9_read_work() canceled all pending requests.
Thread 1 Thread 2
...
p9_client_create()
...
p9_fd_create()
...
p9_conn_create()
...
// start Thread 2
INIT_WORK(&m->rq, p9_read_work);
p9_read_work()
...
p9_client_rpc()
...
...
p9_conn_cancel()
...
spin_lock(&m->req_lock);
...
p9_fd_cancelled()
...
...
spin_unlock(&m->req_lock);
// status rewrite
p9_client_cb(m->client, req, REQ_STATUS_ERROR)
// first remove
list_del(&req->req_list);
...
spin_lock(&m->req_lock)
...
// second remove
list_del(&req->req_list);
spin_unlock(&m->req_lock)
...
Commit 74d6a5d566 ("9p/trans_fd: Fix concurrency del of req_list in
p9_fd_cancelled/p9_read_work") fixes a concurrency issue in the 9p filesystem
client where the req_list could be deleted simultaneously by both
p9_read_work and p9_fd_cancelled functions, but for the case where req->status
equals REQ_STATUS_RCVD.
Update the check for req->status in p9_fd_cancelled to skip processing not
just received requests, but anything that is not SENT, as whatever
changed the state from SENT also removed the request from its list.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: afd8d65411 ("9P: Add cancelled() to the transport functions.")
Cc: stable@vger.kernel.org
Signed-off-by: Nalivayko Sergey <Sergey.Nalivayko@kaspersky.com>
Message-ID: <20250715154815.3501030-1-Sergey.Nalivayko@kaspersky.com>
[updated the check from status == RECV || status == ERROR to status != SENT]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0d36727bf upstream.
Ensure that set_ent is always set since only drbg provides it.
Fixes: 77ebdabe8d ("crypto: af_alg - add extra parameters for DRBG interface")
Reported-by: Yiqi Sun <sunyiqixm@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2ce245341 upstream.
Devices with power.no_pm set are not expected to need any power
management at all, so modify device_set_pm_not_required() to set
power.no_callbacks for them too in case runtime PM will be enabled
for any of them (which in principle may be done for convenience if
such a device participates in a dependency chain).
Since device_set_pm_not_required() must be called before device_add()
or it would not have any effect, it can update power.no_callbacks
without locking, unlike pm_runtime_no_callbacks() that can be called
after registering the target device.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/1950054.tdWV9SEqCh@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82a051e255 upstream.
Flush stale data from the RX FIFO in case of errors, to avoid reading
old data when new packets arrive.
Commit c6e8d85faf ("staging: axis-fifo: Remove hardware resets for
user errors") removed full FIFO resets from the read error paths, which
fixed potential TX data losses, but introduced this RX issue.
Fixes: c6e8d85faf ("staging: axis-fifo: Remove hardware resets for user errors")
Cc: stable@vger.kernel.org
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250912101322.1282507-2-ovidiu.panait.oss@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d07bee10e upstream.
If copy_from_user() fails, write() currently returns -EFAULT, but any
partially written data leaves the TX FIFO in an inconsistent state.
Subsequent write() calls then fail with "transmit length mismatch"
errors.
Once partial data is written to the hardware FIFO, it cannot be removed
without a TX reset. Commit c6e8d85faf ("staging: axis-fifo: Remove
hardware resets for user errors") removed a full FIFO reset for this case,
which fixed a potential RX data loss, but introduced this TX issue.
Fix this by introducing a bounce buffer: copy the full packet from
userspace first, and write to the hardware FIFO only if the copy
was successful.
Fixes: c6e8d85faf ("staging: axis-fifo: Remove hardware resets for user errors")
Cc: stable@vger.kernel.org
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250912101322.1282507-1-ovidiu.panait.oss@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52ff2b840b upstream.
Since commit 2ca34b5087 ("staging: axis-fifo: Correct handling of
tx_fifo_depth for size validation"), write() operations with packets
larger than 'tx_fifo_depth - 4' words are no longer rejected with -EINVAL.
Fortunately, the packets are not actually getting transmitted to hardware,
otherwise they would be raising a 'Transmit Packet Overrun Error'
interrupt, which requires a reset of the TX circuit to recover from.
Instead, the request times out inside wait_event_interruptible_timeout()
and always returns -EAGAIN, since the wake up condition can never be true
for these packets. But still, they unnecessarily block other tasks from
writing to the FIFO and the EAGAIN return code signals userspace to retry
the write() call, even though it will always fail and time out.
According to the AXI4-Stream FIFO reference manual (PG080), the maximum
valid packet length is 'tx_fifo_depth - 4' words, so attempting to send
larger packets is invalid and should not be happening in the first place:
> The maximum packet that can be transmitted is limited by the size of
> the FIFO, which is (C_TX_FIFO_DEPTH–4)*(data interface width/8) bytes.
Therefore, bring back the old behavior and outright reject packets larger
than 'tx_fifo_depth - 4' with -EINVAL. Add a comment to explain why the
check is necessary. The dev_err() message was removed to avoid cluttering
the dmesg log if an invalid packet is received from userspace.
Fixes: 2ca34b5087 ("staging: axis-fifo: Correct handling of tx_fifo_depth for size validation")
Cc: stable@vger.kernel.org
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250817171350.872105-1-ovidiu.panait.oss@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ebcd3460c upstream.
A process might fail to allocate a new bitmap when trying to expand its
proc->dmap. In that case, dbitmap_grow() fails and frees the old bitmap
via dbitmap_free(). However, the driver calls dbitmap_free() again when
the same process terminates, leading to a double-free error:
==================================================================
BUG: KASAN: double-free in binder_proc_dec_tmpref+0x2e0/0x55c
Free of addr ffff00000b7c1420 by task kworker/9:1/209
CPU: 9 UID: 0 PID: 209 Comm: kworker/9:1 Not tainted 6.17.0-rc6-dirty #5 PREEMPT
Hardware name: linux,dummy-virt (DT)
Workqueue: events binder_deferred_func
Call trace:
kfree+0x164/0x31c
binder_proc_dec_tmpref+0x2e0/0x55c
binder_deferred_func+0xc24/0x1120
process_one_work+0x520/0xba4
[...]
Allocated by task 448:
__kmalloc_noprof+0x178/0x3c0
bitmap_zalloc+0x24/0x30
binder_open+0x14c/0xc10
[...]
Freed by task 449:
kfree+0x184/0x31c
binder_inc_ref_for_node+0xb44/0xe44
binder_transaction+0x29b4/0x7fbc
binder_thread_write+0x1708/0x442c
binder_ioctl+0x1b50/0x2900
[...]
==================================================================
Fix this issue by marking proc->map NULL in dbitmap_free().
Cc: stable@vger.kernel.org
Fixes: 15d9da3f81 ("binder: use bitmap for faster descriptor lookup")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Tiffany Yang <ynaffit@google.com>
Link: https://lore.kernel.org/r/20250915221248.3470154-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 810b790033 upstream.
To support loading of a layout module automatically the MODALIAS
variable in the uevent is needed. Add it.
Fixes: fc29fd821d ("nvmem: core: Rework layouts to become regular devices")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131347.303345-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f2c0ac142 upstream.
The previous commit 0718a78f6a ("ALSA: usb-audio: Kill timer properly at
removal") patched a UAF issue caused by the error timer.
However, because the error timer kill added in this patch occurs after the
endpoint delete, a race condition to UAF still occurs, albeit rarely.
Additionally, since kill-cleanup for urb is also missing, freed memory can
be accessed in interrupt context related to urb, which can cause UAF.
Therefore, to prevent this, error timer and urb must be killed before
freeing the heap memory.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+f02665daa2abeef4a947@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f02665daa2abeef4a947
Fixes: 0718a78f6a ("ALSA: usb-audio: Kill timer properly at removal")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0718a78f6a upstream.
The USB-audio MIDI code initializes the timer, but in a rare case, the
driver might be freed without the disconnect call. This leaves the
timer in an active state while the assigned object is released via
snd_usbmidi_free(), which ends up with a kernel warning when the debug
configuration is enabled, as spotted by fuzzer.
For avoiding the problem, put timer_shutdown_sync() at
snd_usbmidi_free(), so that the timer can be killed properly.
While we're at it, replace the existing timer_delete_sync() at the
disconnect callback with timer_shutdown_sync(), too.
Reported-by: syzbot+d8f72178ab6783a7daea@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/681c70d7.050a0220.a19a9.00c6.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250519212031.14436-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[ del_timer vs timer_delete differences ]
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1fb710793c upstream.
The MES set resources packet has an optional bit 'lr_compute_wa'
which can be used for preventing MES hangs on long compute jobs.
Set this bit by default.
Co-developed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15d8c92f10 upstream.
MES fence_value will be updated in fence_addr if API success,
otherwise upper 32 bit will be used to indicate error code.
In any case, MES will trigger an EOP interrupt with 0xb1 as
context id in the interrupt cookie
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce4971388c upstream.
New features require the new fields defines
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5cff263606 ]
Driver configures register to choose controller mode before
setting all channels to reset mode leading to failure.
The patch corrects operation of mode setting.
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Tranh Ha <tranh.ha.xb@renesas.com>
Link: https://patch.msgid.link/TYWPR01MB87434739F83E27EDCD23DF44B416A@TYWPR01MB8743.jpnprd01.prod.outlook.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b69680847 ]
This issue is similar to the vulnerability in the `mcp251x` driver,
which was fixed in commit 03c427147b ("can: mcp251x: fix resume from
sleep before interface was brought up").
In the `hi311x` driver, when the device resumes from sleep, the driver
schedules `priv->restart_work`. However, if the network interface was
not previously enabled, the `priv->wq` (workqueue) is not allocated and
initialized, leading to a null pointer dereference.
To fix this, we move the allocation and initialization of the workqueue
from the `hi3110_open` function to the `hi3110_can_probe` function.
This ensures that the workqueue is properly initialized before it is
used during device resume. And added logic to destroy the workqueue
in the error handling paths of `hi3110_can_probe` and in the
`hi3110_can_remove` function to prevent resource leaks.
Signed-off-by: Chen Yufeng <chenyufeng@iie.ac.cn>
Link: https://patch.msgid.link/20250911150820.250-1-chenyufeng@iie.ac.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66d938e89e ]
The filio lock has been released here, so there is no need to jump to
error_folio_unlock to release it again.
Reported-by: syzbot+b73c7d94a151e2ee1e9b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b73c7d94a151e2ee1e9b
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Acked-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed4e6b5d64 ]
Syzbot hits a problem with enabled ref-verify, ignorebadroots and a
fuzzed/damaged extent tree. There's no fallback option like in other
places that can deal with it so disable the whole ref-verify as it is
just a debugging feature.
Reported-by: syzbot+9c3e0cdfbfe351b0bc0e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/0000000000001b6052062139be1c@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dd28fd86c ]
Adjust register settings for SAR adc button detection mode
to fix noise issue in headset.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/766cd1d2dd7a403ba65bb4cc44845f71@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b09d08866 ]
Include the ACPI ID AMDI0108, which is used on upcoming AMD platforms, in
the PMF driver's list of supported devices.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20250915090546.2759130-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5edf3550f ]
When cross-compiling the perf tool for ARM64, `perf help` may crash
with the following assertion failure:
help.c:122: exclude_cmds: Assertion `cmds->names[ci] == NULL' failed.
This happens when the perf binary is not named exactly "perf" or when
multiple "perf-*" binaries exist in the same directory. In such cases,
the `excludes` command list can be empty, which leads to the final
assertion in exclude_cmds() being triggered.
Add a simple guard at the beginning of exclude_cmds() to return early
if excludes->cnt is zero, preventing the crash.
Signed-off-by: hupu <hupu.gm@gmail.com>
Reported-by: Guilherme Amadio <amadio@gentoo.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250909094953.106706-1-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77b8e6fbf9 ]
MAX_TAG_SIZE was 0x1a8 and it may be truncated in the "bi->metadata_size
= ic->tag_size" assignment. We need to limit it to 255.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1d0260362 ]
Set pdm gain value by setting PDM_MISC_CTRL_MASK value.
To avoid low pdm gain value.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20250821054606.1279178-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 208d7f788e upstream.
This `srctree/` link pointed to a file with an underscore, but the header
used a dash instead.
Thus fix it.
This cleans a future warning that will check our `srctree/` links.
Cc: stable@vger.kernel.org
Fixes: 3253aba340 ("rust: block: introduce `kernel::block::mq` module")
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
