[ Upstream commit d9f866b2bb ]
fwnode_graph_get_next_subnode() may return fwnode backed by ACPI
device nodes and there has been no check these devices are present
in the system, unlike there has been on fwnode OF backend.
In order to provide consistent behaviour towards callers,
add a check for device presence by introducing
a new function acpi_get_next_present_subnode(), used as the
get_next_child_node() fwnode operation that also checks device
node presence.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251001102636.1272722-2-sakari.ailus@linux.intel.com
[ rjw: Kerneldoc comment and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 558ae45798 ]
When a UTP error occurs in isolation, UFS is not currently recoverable.
This is because the UTP error is not considered fatal in the error
handling code, leading to either an I/O timeout or an OCS error.
Add the UTP error flag to INT_FATAL_ERRORS so the controller will be
reset in this situation.
sd 0:0:0:0: [sda] tag#38 UNKNOWN(0x2003) Result: hostbyte=0x07
driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#38 CDB: opcode=0x28 28 00 00 51 24 e2 00 00 08 00
I/O error, dev sda, sector 42542864 op 0x0:(READ) flags 0x80700 phys_seg
8 prio class 2
OCS error from controller = 9 for tag 39
pa_err[1] = 0x80000010 at 2667224756 us
pa_err: total cnt=2
dl_err[0] = 0x80000002 at 2667148060 us
dl_err[1] = 0x80002000 at 2667282844 us
No record of nl_err
No record of tl_err
No record of dme_err
No record of auto_hibern8_err
fatal_err[0] = 0x804 at 2667282836 us
---------------------------------------------------
REGISTER
---------------------------------------------------
NAME OFFSET VALUE
STD HCI SFR 0xfffffff0 0x0
AHIT 0x18 0x814
INTERRUPT STATUS 0x20 0x1000
INTERRUPT ENABLE 0x24 0x70ef5
[mkp: commit desc]
Signed-off-by: Hoyoung Seo <hy50.seo@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Message-Id: <20250930061428.617955-1-hy50.seo@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba60189291 ]
During initialization, the EDVD_COREx_VOLT_FREQ registers for some cores
are still at reset values and not reflecting the actual frequency. This
causes get calls to fail. Set all cores to their respective max
frequency during probe to initialize the registers to working values.
Suggested-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86db0c32f1 ]
caches_show() overwrote its buffer on each iteration,
so only the last cache tag was visible in sysfs output.
Properly append with snprintf(buf + count, …).
Signed-off-by: Randall P. Embry <rpembry@gmail.com>
Message-ID: <20250926-v9fs_misc-v1-2-a8b3907fc04d@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ad865862a ]
The NTB epf host driver assumes the BAR number associated with a memory
window is just incremented from the BAR number associated with MW1. This
seems to have been enough so far but this is not really how the endpoint
side work and the two could easily become mis-aligned.
ntb_epf_mw_to_bar() even assumes that the BAR number is the memory window
index + 2, which means the function only returns a proper result if BAR_2
is associated with MW1.
Instead, fully describe and allow arbitrary NTB BAR mapping.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e0d75258b ]
As described in AM335x Errata Advisory 1.0.42, WKUP_DEBUGSS_CLKCTRL
can't be disabled - the clock module will just be stuck in transitioning
state forever, resulting in the following warning message after the wait
loop times out:
l3-aon-clkctrl:0000:0: failed to disable
Just add the clock to enable_init_clks, so no attempt is made to disable
it.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af98caeaa7 ]
This register is important for sequencing the commands to PLLs, so
actually write the update bits with regmap_write_bits() instead of
relying on a read/modify/write regmap command that could skip the actual
hardware write if the value is identical to the one read.
It's changed when modification is needed to the PLL, when
read-only operation is done, we could keep the call to
regmap_update_bits().
Add a comment to the sam9x60_div_pll_set_div() function that uses this
PLL_UPDT register so that it's used consistently, according to the
product's datasheet.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Ryan Wanner <ryan.wanner@microchip.com> # on sama7d65 and sam9x75
Link: https://lore.kernel.org/r/20250827150811.82496-1-nicolas.ferre@microchip.com
[claudiu.beznea: fix "Alignment should match open parenthesis"
checkpatch.pl check]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0237f5635 ]
A potential divider for the master clock is div/3. The register
configuration for div/3 is MASTER_PRES_MAX. The current bit shifting
method does not work for this case. Checking for MASTER_PRES_MAX will
ensure the correct decimal value is stored in the system.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c01fe4965 ]
Add a new word in assembly to store ACR value during the calls
to at91_plla_disable/at91_plla_enable macros and use it.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[cristian.birsan@microchip.com: remove ACR_DEFAULT_PLLA loading]
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Link: https://lore.kernel.org/r/20250827145427.46819-4-nicolas.ferre@microchip.com
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6f1a4f059 ]
PCF2127 can generate interrupt every full second or minute configured
from control and status register 1, bits MI (1) and SI (0).
On interrupt control register 2 bit MSF (7) is set and must be cleared
to continue normal operation.
While the driver never enables this interrupt on its own, users or
firmware may do so - e.g. as an easy way to test the interrupt.
Add preprocessor definition for MSF bit and include it in the irq
bitmask to ensure minute and second interrupts are cleared when fired.
This fixes an issue where the rtc enters a test mode and becomes
unresponsive after a second interrupt has fired and is not cleared in
time. In this state register writes to control registers have no
effect and the interrupt line is kept asserted [1]:
[1] userspace commands to put rtc into unresponsive state:
$ i2cget -f -y 2 0x51 0x00
0x04
$ i2cset -f -y 2 0x51 0x00 0x05 # set bit 0 SI
$ i2cget -f -y 2 0x51 0x00
0x84 # bit 8 EXT_TEST set
$ i2cset -f -y 2 0x51 0x00 0x05 # try overwrite control register
$ i2cget -f -y 2 0x51 0x00
0x84 # no change
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20250825-rtc-irq-v1-1-0133319406a7@solid-run.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 725e9d8186 ]
Add the missing option name in the help message. Additionally,
switch to __uml_help(), because this is a global option rather
than a per-channel option.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32058c38d3 ]
The function call new_inode() is a primitive for allocating an inode in memory,
rather than planning disk space for it. Therefore, -ENOMEM should be returned
as the error code rather than -ENOSPC.
To be specific, new_inode()'s call path looks like this:
new_inode
new_inode_pseudo
alloc_inode
ops->alloc_inode (hpfs_alloc_inode)
alloc_inode_sb
kmem_cache_alloc_lru
Therefore, the failure of new_inode() indicates a memory presure issue (-ENOMEM),
not a lack of disk space. However, the current implementation of
hpfs_mkdir/create/mknod/symlink incorrectly returns -ENOSPC when new_inode() fails.
This patch fix this by set err to -ENOMEM before the goto statement.
BTW, we also noticed that other nested calls within these four functions,
like hpfs_alloc_f/dnode and hpfs_add_dirent, might also fail due to memory presure.
But similarly, only -ENOSPC is returned. Addressing these will involve code
modifications in other functions, and we plan to submit dedicated patches for these
issues in the future. For this patch, we focus on new_inode().
Signed-off-by: Yikang Yue <yikangy2@illinois.edu>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b1a4a59a2 ]
In btrfs_fallocate(), when the allocated range overlaps with a prealloc
extent and the extent starts after i_size, the range doesn't get marked
dirty in file_extent_tree. This results in persisting an incorrect
disk_i_size for the inode when not using the no-holes feature.
This is reproducible since commit 41a2ee75aa ("btrfs: introduce
per-inode file extent tree"), then became hidden since commit 3d7db6e8bd
("btrfs: don't allocate file extent tree for non regular files") and then
visible again after commit 8679d2687c ("btrfs: initialize
inode::file_extent_tree after i_mode has been set"), which fixes the
previous commit.
The following reproducer triggers the problem:
$ cat test.sh
MNT=/mnt/test
DEV=/dev/vdb
mkdir -p $MNT
mkfs.btrfs -f -O ^no-holes $DEV
mount $DEV $MNT
touch $MNT/file1
fallocate -n -o 1M -l 2M $MNT/file1
umount $MNT
mount $DEV $MNT
len=$((1 * 1024 * 1024))
fallocate -o 1M -l $len $MNT/file1
du --bytes $MNT/file1
umount $MNT
mount $DEV $MNT
du --bytes $MNT/file1
umount $MNT
Running the reproducer gives the following result:
$ ./test.sh
(...)
2097152 /mnt/test/file1
1048576 /mnt/test/file1
The difference is exactly 1048576 as we assigned.
Fix by adding a call to btrfs_inode_set_file_extent_range() in
btrfs_fallocate_update_isize().
Fixes: 41a2ee75aa ("btrfs: introduce per-inode file extent tree")
Signed-off-by: austinchang <austinchang@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe9622011f ]
When QP wraps around, WQE data from the previous use at the same
position still remains as driver does not clear it. The WQE field
layout differs across different opcodes, causing that the fields
that are not explicitly assigned for the current opcode retain
stale values, and are issued to HW by mistake. Such fields are as
follows:
* MSG_START_SGE_IDX field in ATOMIC WQE
* BLOCK_SIZE and ZBVA fields in FRMR WQE
* DirectWQE fields when DirectWQE not used
For ATOMIC WQE, always set the latest sge index in MSG_START_SGE_IDX
as required by HW.
For FRMR WQE and DirectWQE, clear only those unassigned fields
instead of the entire WQE to avoid performance penalty.
Fixes: 68a997c5d2 ("RDMA/hns: Add FRMR support for hip08")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251016114051.1963197-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5a7cbea54 ]
The actual sge number may exceed the value specified in init_attr->cap
when HW needs extra sge to enable inline feature. Since these extra
sges are not expected by ULP, return the user-specified value to ULP
instead of the expanded sge number.
Fixes: 0c5e259b06 ("RDMA/hns: Fix incorrect sge nums calculation")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251016114051.1963197-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5575b7646b ]
The driver maintains a CQ table that is used to ensure that a CQ is
still valid when processing CQ related AEs. When a CQ is destroyed,
the table entry is cleared, using irdma_cq.cq_num as the index. This
field was never being set, so it was just always clearing out entry
0.
Additionally, the cq_num field size was increased to accommodate HW
supporting more than 64K CQs.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20250923142439.943930-1-jmoroni@google.com
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 880245fd02 ]
These fields were set but not used anywhere, so remove them.
Link: https://patch.msgid.link/r/20250923142128.943240-1-jmoroni@google.com
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: 5575b7646b ("RDMA/irdma: Set irdma_cq cq_num field during CQ create")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d158f47f1 ]
In some cases, it is possible for pble_rsrc->next_fpm_addr to be
larger than u32, so remove the u32 cast to avoid unintentional
truncation.
This fixes the following error that can be observed when registering
massive memory regions:
[ 447.227494] (NULL ib_device): cqp opcode = 0x1f maj_err_code = 0xffff min_err_code = 0x800c
[ 447.227505] (NULL ib_device): [Update PE SDs Cmd Error][op_code=21] status=-5 waiting=1 completion_err=1 maj=0xffff min=0x800c
Fixes: e8c4dbc2fc ("RDMA/irdma: Add PBLE resource manager")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20250923190850.1022773-1-jmoroni@google.com
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 761dc71c60 ]
All the 3 major C compilers (MSVC, GCC, LLVM/Clang) warn about
the unused variable i after the removal of its usage by PR #1031
addressing Issue #1027
Link: 6d235320
Signed-off-by: Saket Dumbre <saket.dumbre@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00be6f26a2 ]
When io_uring is used in the same task as CIFS, there might be
unnecessary reconnects, causing issues in user-space applications
like QEMU with a log like:
> CIFS: VFS: \\10.10.100.81 Error -512 sending data on socket to server
Certain io_uring completions might be added to task_work with
notify_method being TWA_SIGNAL and thus TIF_NOTIFY_SIGNAL is set for
the task.
In __smb_send_rqst(), signals are masked before calling
smb_send_kvec(), but the masking does not apply to TIF_NOTIFY_SIGNAL.
If sk_stream_wait_memory() is reached via sock_sendmsg() while
TIF_NOTIFY_SIGNAL is set, signal_pending(current) will evaluate to
true there, and -EINTR will be propagated all the way from
sk_stream_wait_memory() to sock_sendmsg() in smb_send_kvec().
Afterwards, __smb_send_rqst() will see that not everything was written
and reconnect.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3677ca67b9 ]
we should use sock_create_kern() if the socket resides in kernel space.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4099b98203 ]
A soft lockup was observed when loading amdgpu module.
If a module has a lot of tracable functions, multiple calls
to kallsyms_lookup can spend too much time in RCU critical
section and with disabled preemption, causing kernel panic.
This is the same issue that was fixed in
commit d0b24b4e91 ("ftrace: Prevent RCU stall on PREEMPT_VOLUNTARY
kernels") and commit 42ea22e754 ("ftrace: Add cond_resched() to
ftrace_graph_set_hash()").
Fix it the same way by adding cond_resched() in ftrace_module_enable.
Link: https://lore.kernel.org/aMQD9_lxYmphT-up@vova-pc
Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 025e880759 ]
Willy Tarreau <w@1wt.eu> forwarded me a message from
Disclosure <disclosure@aisle.com> with the following
warning:
> The helper `xattr_key()` uses the pointer variable in the loop condition
> rather than dereferencing it. As `key` is incremented, it remains non-NULL
> (until it runs into unmapped memory), so the loop does not terminate on
> valid C strings and will walk memory indefinitely, consuming CPU or hanging
> the thread.
I easily reproduced this with setfattr and getfattr, causing a kernel
oops, hung user processes and corrupted orangefs files. Disclosure
sent along a diff (not a patch) with a suggested fix, which I based
this patch on.
After xattr_key started working right, xfstest generic/069 exposed an
xattr related memory leak that lead to OOM. xattr_key returns
a hashed key. When adding xattrs to the orangefs xattr cache, orangefs
used hash_add, a kernel hashing macro. hash_add also hashes the key using
hash_log which resulted in additions to the xattr cache going to the wrong
hash bucket. generic/069 tortures a single file and orangefs does a
getattr for the xattr "security.capability" every time. Orangefs
negative caches on xattrs which includes a kmalloc. Since adds to the
xattr cache were going to the wrong bucket, every getattr for
"security.capability" resulted in another kmalloc, none of which were
ever freed.
I changed the two uses of hash_add to hlist_add_head instead
and the memory leak ceased and generic/069 quit throwing furniture.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Reported-by: Stanislav Fort of Aisle Research <stanislav.fort@aisle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1b501a8c6 ]
page_pool_init() returns E2BIG when the page_pool size goes above 32K
pages. As some drivers are configuring the page_pool size according to
the MTU and ring size, there are cases where this limit is exceeded and
the queue creation fails.
The page_pool size doesn't have to cover a full queue, especially for
larger ring size. So clamp the size instead of returning an error. Do
this in the core to avoid having each driver do the clamping.
The current limit was deemed to high [1] so it was reduced to 16K to avoid
page waste.
[1] https://lore.kernel.org/all/1758532715-820422-3-git-send-email-tariqt@nvidia.com/
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250926131605.2276734-2-dtatulea@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38b04ed707 ]
The TTY layer already serializes line discipline operations with
tty->ldisc_sem, so the extra disc_data_lock and refcnt in 6pack
are unnecessary.
Removing them simplifies the code and also resolves a lockdep warning
reported by syzbot. The warning did not indicate a real deadlock, since
the write-side lock was only taken in process context with hardirqs
disabled.
Reported-by: syzbot+5fd749c74105b0e1b302@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68c858b0.050a0220.3c6139.0d1c.GAE@google.com/
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20250925051059.26876-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dfba10838 ]
For exFAT filesystems with 4MB read_ahead_size, removing the storage device
when the read operation is in progress, which cause the last read syscall
spent 150s [1]. The main reason is that exFAT generates excessive log
messages [2].
After applying this patch, approximately 300,000 lines of log messages
were suppressed, and the delay of the last read() syscall was reduced
to about 4 seconds.
[1]:
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000120>
read(4, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000032>
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000119>
read(4, 0x7fccf28ae000, 131072) = -1 EIO (Input/output error) <150.186215>
[2]:
[ 333.696603] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
[ 333.697378] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
[ 333.698156] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 659169c4eb ]
The 1824c does not have the A/B switch that the 1810c has,
but instead it has a mono main switch that sums the two
main output channels to mono.
Signed-off-by: Roy Vegard Ovesen <roy.vegard.ovesen@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca94b2b036 ]
Currently, bcsp_recv() can be called even when the BCSP protocol has not
been registered. This leads to a NULL pointer dereference, as shown in
the following stack trace:
KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590
Call Trace:
<TASK>
hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627
tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290
tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
To prevent this, ensure that the HCI_UART_REGISTERED flag is set before
processing received data. If the protocol is not registered, return
-EUNATCH.
Reported-by: syzbot+4ed6852d4da4606c93da@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4ed6852d4da4606c93da
Tested-by: syzbot+4ed6852d4da4606c93da@syzkaller.appspotmail.com
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70a5ce8bc9 ]
bp->dev->dev_addr is of type `unsigned char *`. Casting it to a u32
pointer and dereferencing implies dealing manually with endianness,
which is error-prone.
Replace by calls to get_unaligned_le32|le16() helpers.
This was found using sparse:
⟩ make C=2 drivers/net/ethernet/cadence/macb_main.o
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] bottom
got restricted __le32 [usertype]
warning: incorrect type in assignment (different base types)
expected unsigned short [usertype] top
got restricted __le16 [usertype]
...
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-5-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46e75c56df ]
The following code paths may result in high latency or even task hangs:
1. fastcommit io is throttled by wbt.
2. jbd2_fc_wait_bufs() might wait for a long time while
JBD2_FAST_COMMIT_ONGOING is set in journal->flags, and then
jbd2_journal_commit_transaction() waits for the
JBD2_FAST_COMMIT_ONGOING bit for a long time while holding the write
lock of j_state_lock.
3. start_this_handle() waits for read lock of j_state_lock which
results in high latency or task hang.
Given the fact that ext4_fc_commit() already modifies the current
process' IO priority to match that of the jbd2 thread, it should be
reasonable to match jbd2's IO submission flags as well.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250827121812.1477634-1-sunjunchao@bytedance.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1534f72dc2 ]
The parent function ext4_xattr_inode_lookup_create already uses GFP_NOFS for memory alloction, so the function ext4_xattr_inode_cache_find should use same gfp_flag.
Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4be7599d6b ]
Add handling for MPI26_SAS_NEG_LINK_RATE_22_5 in
_transport_convert_phy_link_rate(). This maps the new 22.5 Gbps
negotiated rate to SAS_LINK_RATE_22_5_GBPS, to get correct PHY link
speeds.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Message-Id: <20250922095113.281484-4-ranjan.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 072fdd4b0b ]
The fc_ct_ms_fill() helper currently formats the OS name and version
into entry->value using "%s v%s". Since init_utsname()->sysname and
->release are unbounded strings, snprintf() may attempt to write more
than FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN bytes, triggering a
-Wformat-truncation warning with W=1.
In file included from drivers/scsi/libfc/fc_elsct.c:18:
drivers/scsi/libfc/fc_encode.h: In function ‘fc_ct_ms_fill.constprop’:
drivers/scsi/libfc/fc_encode.h:359:30: error: ‘%s’ directive output may
be truncated writing up to 64 bytes into a region of size between 62
and 126 [-Werror=format-truncation=]
359 | "%s v%s",
| ^~
360 | init_utsname()->sysname,
361 | init_utsname()->release);
| ~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/libfc/fc_encode.h:357:17: note: ‘snprintf’ output between
3 and 131 bytes into a destination of size 128
357 | snprintf((char *)&entry->value,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
358 | FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
359 | "%s v%s",
| ~~~~~~~~~
360 | init_utsname()->sysname,
| ~~~~~~~~~~~~~~~~~~~~~~~~
361 | init_utsname()->release);
| ~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by using "%.62s v%.62s", which ensures sysname and release are
truncated to fit within the 128-byte field defined by
FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN.
[mkp: clarified commit description]
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd9a9562b2 ]
Currently, after the bridge is created, the FDB does not hold an FDB entry
for the bridge MAC on VLAN 0:
# ip link add name br up type bridge
# ip -br link show dev br
br UNKNOWN 92:19:8c:4e:01:ed <BROADCAST,MULTICAST,UP,LOWER_UP>
# bridge fdb show | grep 92:19:8c:4e:01:ed
92:19:8c:4e:01:ed dev br vlan 1 master br permanent
Later when the bridge MAC is changed, or in fact when the address is given
during netdevice creation, the entry appears:
# ip link add name br up address 00:11:22:33:44:55 type bridge
# bridge fdb show | grep 00:11:22:33:44:55
00:11:22:33:44:55 dev br vlan 1 master br permanent
00:11:22:33:44:55 dev br master br permanent
However when the bridge address is set by the user to the current bridge
address before the first port is enslaved, none of the address handlers
gets invoked, because the address is not actually changed. The address is
however marked as NET_ADDR_SET. Then when a port is enslaved, the address
is not changed, because it is NET_ADDR_SET. Thus the VLAN 0 entry is not
added, and it has not been added previously either:
# ip link add name br up type bridge
# ip -br link show dev br
br UNKNOWN 7e:f0:a8:1a:be:c2 <BROADCAST,MULTICAST,UP,LOWER_UP>
# ip link set dev br addr 7e:f0:a8:1a:be:c2
# ip link add name v up type veth
# ip link set dev v master br
# ip -br link show dev br
br UNKNOWN 7e:f0:a8:1a:be:c2 <BROADCAST,MULTICAST,UP,LOWER_UP>
# bridge fdb | grep 7e:f0:a8:1a:be:c2
7e:f0:a8:1a:be:c2 dev br vlan 1 master br permanent
Then when the bridge MAC is used as DMAC, and br_handle_frame_finish()
looks up an FDB entry with VLAN=0, it doesn't find any, and floods the
traffic instead of passing it up.
Fix this by simply adding the VLAN 0 FDB entry for the bridge itself always
on netdevice creation. This also makes the behavior consistent with how
ports are treated: ports always have an FDB entry for each member VLAN as
well as VLAN 0.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/415202b2d1b9b0899479a502bbe2ba188678f192.1758550408.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a890a2e339 ]
Theoretically it's an oopsable race, but I don't believe one can manage
to hit it on real hardware; might become doable on a KVM, but it still
won't be easy to attack.
Anyway, it's easy to deal with - since xdr_encode_hyper() is just a call of
put_unaligned_be64(), we can put that under ->d_lock and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf75ad0968 ]
When client initialization goes through server trunking discovery, it
schedules the state manager and then sleeps waiting for nfs_client
initialization completion.
The state manager can fail during state recovery, and specifically in
lease establishment as nfs41_init_clientid() will bail out in case of
errors returned from nfs4_proc_create_session(), without ever marking
the client ready. The session creation can fail for a variety of reasons
e.g. during backchannel parameter negotiation, with status -EINVAL.
The error status will propagate all the way to the nfs4_state_manager
but the client status will not be marked, and thus the mount process
will remain blocked waiting.
Fix it by adding -EINVAL error handling to nfs4_state_manager().
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be390f9524 ]
RFC7530 states that clients should be prepared for the return of
NFS4ERR_GRACE errors for non-reclaim lock and I/O requests.
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54898664e1 ]
A remoteproc could theoretically signal handover twice. This is unexpected
and would break the reference counting for the handover resources (power
domains, clocks, regulators, etc), so add a check to prevent that from
happening.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250820-rproc-qcom-q6v5-fixes-v2-2-910b1a3aff71@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 299fad4133 ]
When a device is surprise-removed (e.g., due to a dock unplug), the PCI
core unconfigures all downstream devices and sets their error state to
pci_channel_io_perm_failure. This marks them as disconnected via
pci_dev_is_disconnected().
During device removal, the runtime PM framework may attempt to resume the
device to D0 via pm_runtime_get_sync(), which calls into pci_power_up().
Since the device is already disconnected, this resume attempt is
unnecessary and results in a predictable errors like this, typically when
undocking from a TBT3 or USB4 dock with PCIe tunneling:
pci 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
Avoid powering up disconnected devices by checking their status early in
pci_power_up() and returning -EIO.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[bhelgaas: add typical message]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://patch.msgid.link/20250909031916.4143121-1-superm1@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16df67f218 ]
The two implementers of vfio_device_ops.device_feature,
vfio_cdx_ioctl_feature and vfio_pci_core_ioctl_feature, return
-ENOTTY in the fallthrough case when the feature is unsupported. For
consistency, the base case, vfio_ioctl_device_feature, should do the
same when device_feature == NULL, indicating an implementation has no
feature extensions.
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20250908-vfio-enotty-v1-1-4428e1539e2e@fb.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7205ef77df ]
Conventions for readsl() are the same as for readl() - any __iomem
pointer is acceptable, both const and volatile ones being OK. Same
for readsb() and readsw().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com> # Making sparc64 subject prefix
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05457d9617 ]
This is needed so that the kernel can handle R_SPARC_UA64 relocations,
which is emitted by LLVM's IAS.
Signed-off-by: Koakuma <koachan@protonmail.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49a6c160ad ]
cdns_pcie::ops might not be populated by all the Cadence glue drivers. This
is going to be true for the upcoming Sophgo platform which doesn't set the
ops.
Hence, add a check to prevent NULL pointer dereference.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/35182ee1d972dfcd093a964e11205efcebbdc044.1757643388.git.unicorn_wang@outlook.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf7154ffb1 ]
EEE speed down means speed down MAC MCU clock. It is not from spec.
It is kind of Realtek specific power saving feature. But enable it
may cause some issues, like packet drop or interrupt loss. Different
hardware may have different issues.
EEE speed down ratio (mac ocp 0xe056[7:4]) is used to set EEE speed
down rate. The larger this value is, the more power can save. But it
actually save less power then we expected. And, as mentioned above,
will impact compatibility. So set it to 1 (mac ocp 0xe056[7:4] = 0)
, which means not to speed down, to improve compatibility.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20250918023425.3463-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99e9c5ffbb ]
Variable idx is set in the loop, but is never used resulting in dead
code. Building with GCC 16, which enables
-Werror=unused-but-set-parameter= by default results in build error.
This patch removes the idx parameter, since all the callers of the
fm10k_unbind_hw_stats_q as 0 as idx anyways.
Suggested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 487e8a8c34 ]
It appears that not all hardware/firmware implementations support
group key deletion correctly, which can lead to connection hangs
and deauthentication following GTK rekeying (delete and install).
To avoid this issue, instead of attempting to delete the key using
the special WMI_CIPHER_NONE value, we now replace the key with an
invalid (random) value.
This behavior has been observed with WCN39xx chipsets.
Tested-on: WCN3990 hw1.0 WLAN.HL.3.3.7.c2-00931-QCAHLSWMTPLZ-1
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Closes: https://lore.kernel.org/all/DAWJQ2NIKY28.1XOG35E4A682G@linaro.org
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # QRB2210 RB1
Link: https://patch.msgid.link/20250902143225.837487-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
