mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
1,484,114 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Simon Polack
|
b76a5b7bee |
drm/amd/display: Fix stale replay_events after mod_power stream removal
[Why]
mod_power_remove_stream() shifts the remaining power_entity slots down
but does not move replay_events, and mod_power_add_stream() does not
initialize it. replay_events therefore stay bound to the map slot
instead of the stream.
When several streams are disabled in one atomic commit,
amdgpu_dm_mod_power_update_streams() removes them one after another.
The eDP stream can then be looked up in a slot whose stale
replay_events already have replay_event_hw_programming set, so
amdgpu_dm_replay_set_event() returns early ("already in desired state")
without calling mod_power_set_replay_event(). Replay is not disabled
before the eDP panel is powered off. After DPMS on, the sink reports
neither replay state nor frame lock (DPCD 0x378 = 0x00, no error bits),
so the HPD IRQ recovery does not trigger and the panel stays black
until a full modeset.
Seen with an eDP panel using FreeSync Replay plus two DP-MST displays:
DPMS off/on of all outputs leaves eDP black, while DPMS of eDP alone
works. Doing an eDP-only DPMS first makes the next all-output DPMS
fail reliably.
[How]
Shift replay_events together with the PSR cached fields in
mod_power_remove_stream() and initialize it to replay_event_vsync in
mod_power_add_stream(), matching the psr_event_vsync initial value used
for PSR (both vsync events are driven together by
amdgpu_dm_crtc_set_static_screen_optimze()).
Tested on 7.3.0-rc3 (
|
||
Imre Kaloz
|
de1eab13ef |
drm/radeon: Read the VRAM VBIOS signature with readb()
igp_read_bios_from_vram() checked bios[0]/bios[1] with a plain __iomem load, which faults on sparc64 before the copy runs at all. radeon_read_bios() already reads its two signature bytes with readb() ahead of its own copy; use the same accessor here, keeping the check before the allocation. Fixes: |
||
Hari Mishal
|
217f64f348 |
drm/amd/display: guard dc_sink dereferences in MST mode validation
dm_dp_mst_is_port_support_mode() reads aconnector->dc_sink->dsc_caps... for the DSC branch-throughput check, and get_conv_frl_bw()'s HDMI-PCON FRL-bandwidth path reads aconnector->dc_sink->edid_caps.max_frl_rate, both without a NULL check. dc_sink is cleared asynchronously on MST unplug, and both functions run from paths that the driver's own comments document as racing that teardown: the connector probe worker's ->mode_valid callback and a compositor's atomic check, neither of which holds the MST manager lock that the teardown path uses. The former does have an existing dsc_aux NULL check, but dsc_aux isn't reliably cleared in every path that clears dc_sink, so it doesn't cover this. Fail the port-support check and skip the FRL conversion path when the sink is already gone. Fixes: |
||
Adrian Betschart
|
106b4a2a78 |
drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validation
amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and uses the first encoding that validates. YCbCr 4:4:4 is listed before RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the "color format" property is left at AUTO, even though RGB fits the same link. That contradicts the documented AUTO behaviour for HDMI in enum drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when the bandwidth is not available or the mode is 4:2:0-only), which the amdgpu implementation of the property also describes. It also leaves the "Broadcast RGB" property without effect on such sinks, since the quantization range it selects only applies to RGB output. Try RGB first. The mask still holds every encoding the sink supports, so a mode that cannot carry RGB falls back exactly as before. For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI sink that advertised it. Fixes: |
||
Sasha Levin
|
fbc988f236 |
drm/amd/display: Fix sanitizer check for the DML frame size limit
Building x86_64 allmodconfig with clang fails: .../dml2_0/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:10491:13: error: stack frame size (3128) exceeds limit (3072) in 'dml_core_mode_programming' [-Werror,-Wframe-larger-than] That config enables both KASAN and UBSAN, and should get the 4096 byte limit meant for clang COMPILE_TEST sanitizer builds. The check in the dml and dml2_0 Makefiles concatenates the three symbols with no separator: ifeq ($(filter y,$(CONFIG_KASAN)$(CONFIG_KCSAN)$(CONFIG_UBSAN)),y) KASAN and KCSAN cannot be enabled together, so before UBSAN was added the string was at most "y". UBSAN can be enabled alongside either of them, and with both set the string becomes "yy", $(filter y,yy) is empty, and the build falls through to the non-sanitizer limit of 3072. Adding UBSAN to the check therefore lowered the limit for the most heavily instrumented builds instead of raising it. Separate the symbols with spaces so that $(filter) sees individual words, and test for a non-empty result. Only the configs with two sanitizers enabled change behaviour. Found by KernelCI builds of the linus-next tree. Fixes: |
||
Alex Deucher
|
e3e7fdece7 |
drm/amdgpu/gmc12.1: properly pass flush_type to gmc_v12_1_flush_vm_hub()
In gmc_v12_1_flush_gpu_tlb(), flush_type was not properly
passed to gmc_v12_1_flush_vm_hub(). This only affected
the MMIO path. In most cases the flush would go through
MES.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit
|
||
|
Alex Deucher
|
1d1f1acecd |
drm/amdgpu: drop userq callback assignment for sdma 7.1
Not enabled in 7.1 so drop the assignment. Cc: Horatio Zhang <hongkun.zhang@amd.com> Cc: Hawking.Zhang@amd.com Fixes: |
||
Willian Oliveira
|
cc172e1777 |
drm/amdgpu/gfx6: fix firmware leak on teardown
The firmware requested in gfx_v6_0_init_microcode() is not released
when the GFX block is torn down, leaking the firmware resources.
Add gfx_v6_0_free_microcode() and call it from gfx_v6_0_sw_fini()
to release the PFP, ME, CE and RLC firmware.
Signed-off-by: Willian Oliveira <williandossantosdeoliveira287@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit
|
||
Guangshuo Li
|
f001304615 |
drm/amdgpu: fix ACP MFD device leak on init failure
acp_hw_init() registers ACP child devices with mfd_add_devices() before attaching them to the ACP power domain and initializing the hardware. If attaching a child to the power domain fails, or if the ACP reset or clock enable operation times out, the failure path frees only the source cell, resource, and platform-data allocations. The child platform devices already registered by mfd_add_devices() remain registered and are never released. Remove the children from the power domain and unregister the MFD devices on failures that occur after mfd_add_devices() succeeds. Keep mfd_add_devices() failures on the existing cleanup path since the MFD core already rolls back partially registered children itself. The issue was identified by a static analysis tool I developed and confirmed by manual review. Fixes: |
||
|
Guangshuo Li
|
f5a5add360 |
drm/amdgpu: fix IP instance memory leak on kobject add failure
amdgpu_discovery_sysfs_ips() allocates ip_hw_instance with kzalloc_flex() and initializes its embedded kobject before calling kobject_add(). If kobject_add() fails, the return value is ignored and execution continues without dropping the initial kobject reference. The failed kobject is not retained in the kset list, so the normal sysfs teardown path cannot find it. As a result, ip_hw_instance_release() is never called and the ip_hw_instance allocation is leaked. Call kobject_put() when kobject_add() fails so the initial reference is dropped and ip_hw_instance_release() can free the allocation. Keep the existing best-effort sysfs behavior by continuing with the remaining IP entries after the failed registration. The issue was identified by a static analysis tool I developed and confirmed by manual review. Fixes: |
||
Theo Andersen Carton
|
eadb85cca1 |
drm/amdgpu: skip the noirq suspend reset for a switcheroo-parked GPU
amdgpu_pmops_suspend_noirq() resets the ASIC unconditionally. When the GPU has been parked by vga_switcheroo it has neither power nor a PCIe link, so the reset cannot reach it: pci_set_power_state() reports the device as inaccessible and amdgpu_asic_reset() returns -EINVAL. A failure there aborts the entire noirq suspend phase, and with it the system suspend, so the machine cannot sleep at all while the GPU is switched off. amdgpu_device_prepare(), amdgpu_device_suspend() and amdgpu_device_resume() all bail out early on DRM_SWITCH_POWER_OFF. This callback was added later, for an unrelated reason, and did not inherit the check. nouveau guards every one of its PM callbacks the same way. Bail out the same way here. On a single-GPU system switch_power_state is never DRM_SWITCH_POWER_OFF, so this is a no-op there. Found on a MacBookPro11,5, where the Radeon is powered down through apple-gmux so that the internal panel can be driven by the iGPU instead. Every suspend failed in amdgpu_pmops_suspend_noirq() while the card was off; with this check a full S3 cycle completes. Fixes: |
||
|
Alex Deucher
|
0bfb1bfc82 |
drm/amdgpu/gmc12: properly pass flush_type to gmc_v12_0_flush_vm_hub()
In gmc_v12_0_flush_gpu_tlb(), flush_type was not properly
passed to gmc_v12_0_flush_vm_hub(). This only affected
the MMIO path. In most cases the flush would go through
MES.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit
|
||
Ray Wu
|
51cc916648 |
drm/amd/display: map PWM brightness through custom backlight curve
[Why/How] On the PWM path, convert the userspace brightness to an input signal and derive the target luminance from the custom backlight curve, then pass the resulting millipercent to the power module. This keeps PWM programming and backlight curve mapping in the power module, aligning the Linux path with the Windows behavior. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5723 Fixes: |
||
Pierre-Eric Pelloux-Prayer
|
eaeac1498b |
drm/amdgpu: implement workaround for sdma dcc corruption
For unknown reasons, on gfx12 using multiple entities can causes random corruption of BOs with DCC. This workaround seems to prevent the issue until the root cause is understood and fixed. Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5663 Fixes: |
||
Andrew Martin
|
0e4101c11a |
drm/amdkfd: Fix always mapped range mapping to all ACCESS GPUs
CWSR ranges use the always mapped flag and only need a mapping on the GPU running the queue. However, svm_range_validate_and_map now updates the mapping on every GPU with the ACCESS attribute, which is all supported GPUs when XNACK is on. After the range is prefetched to VRAM, those GPUs may span different XGMI hives, so the page owner mismatches and is set to NULL. hmm_range_fault then tries to migrate the VRAM pages back to system memory, but svm_migrate_to_ram skips it because migrating pages back to system memory is not allowed while the GPU mapping is being updated, so the CPU page fault is never resolved. Only map to the ACCESS GPUs if the range is not mapped to any GPU and is not in VRAM. Fixes: |
||
Jesse Zhang
|
8228688eb4 |
drm/amdgpu/gfx11: set KMD_QUEUE for kernel gfx queues
Set KMD_QUEUE in the GFX MQD and kernel ring control registers so CP
preserves kernel IB VMIDs instead of replacing them with the queue VMID.
Use prop->kernel_queue to distinguish kernel and user MQDs.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit
|
||
|
Jesse Zhang
|
9fe5745f9d |
drm/amdgpu/gfx12: set KMD_QUEUE for kernel gfx queues
Set KMD_QUEUE in the GFX MQD and kernel ring control registers so CP
preserves kernel IB VMIDs instead of replacing them with the queue VMID.
Use prop->kernel_queue to distinguish kernel and user MQDs.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit
|
||
|
Jesse Zhang
|
56b2b97e78 |
drm/amdgpu: fix empty fence backup and replay intervals
amdgpu_ring_set_fence_errors_and_reemit() and
amdgpu_ring_backup_unprocessed_commands() masked last_seq and sync_seq to
fence-array indices before the loop, then walked a do/while until the two
indices met. When hardware completed every command before the driver
signalled the fences, last_seq == sync_seq, but the masked-index do/while
could not tell that empty interval from a full table and walked the whole
fence array, backing up and replaying already-completed commands.
Read the raw sequence numbers, return early through amdgpu_fence_process()
when they are equal, and mask only at the array index. Guard the
force-completion against a NULL guilty_fence so a non-guilty backup does
not dereference it.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit
|
||
|
Jesse Zhang
|
6b6c4fab88 |
drm/amdgpu: support non-guilty job save on ring backup
amdgpu_ring_backup_unprocessed_commands() is also used to preserve a
ring that carries no guilty command - for example a collateral kernel
gfx ring that shares the faulting pipe during a gfx user-queue pipe
reset. Such a ring is backed up with a NULL guilty_fence and all of its
unprocessed commands must be saved so they can be replayed after the
reset rebuilds the ring's MQD.
The early-return that skips an already-seen guilty fence compared
"ring->guilty_fence == guilty_fence", which is also true when both are
NULL. A non-guilty save therefore hit the early return and left
ring_backup_entries_to_copy at 0, so the pending commands were dropped
when the ring was rebuilt.
Guard the early return with a non-NULL guilty_fence so a NULL fence
never takes it and every unprocessed command is backed up.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit
|
||
Timur Kristóf
|
cd883d0a39 |
drm/amd/pm/si: Check AMD_IS_MOBILITY flag for PPSMC_SYSTEMFLAG_GPIO_DC
Unfortunately, some desktop boards eg. the FirePro D500 have the HARDWAREDC platform flag set and also have a battery power state configured in their VBIOS. This makes no sense for a desktop GPU and results in incorrect behaviour: the clocks are stuck at lowest. We observed that the kernel driver can work around the issue in two possible ways: 1. Set PPSMC_SWSTATE_FLAG_DC on all power states 2. Clear PPSMC_SYSTEMFLAG_GPIO_DC We think that the PPSMC_SYSTEMFLAG_GPIO_DC flag makes the SMC assume it's running on battery even though this is a desktop machine with no battery, and that's why it doesn't do DPM on power states without PPSMC_SYSTEMFLAG_GPIO_DC. Issue was uncovered by "Fix updating clock limits from power states" because previously the limits for the battery state were not tracked separately. However, battery power state has lower frequencies and voltages, so the kernel doesn't set the DC flag on the current power state anymore. That causes the SMC to be stuck on the lowest clocks. Let's clear PPSMC_SYSTEMFLAG_GPIO_DC on desktop GPUs. We can use the AMD_IS_MOBILITY flag to determine that. Fixes: |
||
|
Timur Kristóf
|
3a52d587d1 |
drm/amd/display: Mark DCE 6.4 as not APU
DCE 6.4 is found in Oland chips, which were advertised as low-end gaming GPUs in 2013~2015 and then have been sold as low-end workstation GPUs until 2017~2019. These are not APUs. Fixes: |
||
|
Timur Kristóf
|
687d31ea9a |
drm/amd/display: Fix fast updates on DCE 8.1
DCE8 should use legacy fast updates. This was already set for DCE 8.0 and 8.3, but it seems that DCE 8.1 (found in Kaveri chips) was forgotten. This fix should be backported to all kernel versions that have "Refactor fast update to use new HWSS build sequence", but this patch won't apply cleanly to older kernels due to another refactor in "Remove dc param from check_update". Fixes: |
||
|
Timur Kristóf
|
88427119e1 |
drm/amd/display: Fix fast updates on DCE 6.x
DCE6 should use legacy fast updates, just like all DCE8 - DCN2. Set that flag for DCE 6.0, 6.1 and 6.4 (all DCE6 versions). Technically DCE6 should have been included when the fast update code was refactored, but it just happened to work until now. A recent commit "Attach only plane updates that actually changed" has exposed this issue because with that commit, DC accidentally took the new fast update code path for DCE6 as well, which caused it to boot into a black screen with a flip done timeout. This fix should be backported to all kernel versions that have "Refactor fast update to use new HWSS build sequence", but this patch won't apply cleanly to older kernels due to another refactor in "Remove dc param from check_update". Fixes: |
||
Arthur Heymans
|
5e08102d1d |
drm/amd/display: Preserve eDP mode on initial ASSR failure
Commit |
||
|
Adrian Betschart
|
eb5650d1f3 |
drm/amd/display: Default HDMI RGB output to limited range on CTA modes
With the Broadcast RGB property at Automatic, amdgpu_dm_get_output_color_space() selects COLOR_SPACE_SRGB for RGB output, so DC neither compresses the pixels nor, without a QS-capable sink, signals full range in the AVI InfoFrame. A sink that follows CTA-861 treats the default quantization of a CTA video format as limited and expands 16-235 to 0-255: everything below 16 is crushed to black, everything above 235 clips. Follow the CTA-861 default for Automatic instead, as the DRM HDMI state helper (hdmi_is_limited_range()) and i915 do: limited range on an HDMI sink for CTA modes other than 640x480, full range elsewhere. Full and Limited keep their explicit meaning. The same rule applies to the BT.2020 RGB branch. With commit |
||
Jiangshan Yi
|
015e72cde5 |
drm/amd/display: check dc_state_create_copy() for NULL in dm_suspend
dc_state_create_copy() can return NULL on allocation failure. dm_suspend() only conditionally skips dm_gpureset_toggle_interrupts() and continues execution, returning success. dm_resume() then dereferences the NULL cached_dc_state in link_enc_cfg_copy() and the following dc_state->stream_count loop, crashing during GPU reset recovery. Return -ENOMEM immediately if the copy fails, so the caller aborts suspend instead of leaving a NULL cached state for resume. Fixes: |
||
Linus Torvalds
|
72d3fcf802 | Linux 7.3-rc5 v7.3-rc5 | ||
|
Linus Torvalds
|
d266640c6c |
Driver core fixes for 7.3-rc5
- Suppress spurious "debugfs is not initialized yet" boot warnings when the caller passes an error parent to debugfs file creation; callers propagating an earlier failure should not trigger the warning -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCarkeigAKCRBFlHeO1qrK LsHQAQDS9Zsrclcgi/3nsua2xZFnZ+LNSRspbrAQL3tCxjr6PQD6A1iQpFM47WZY /Tx295xPaXdgcx1dGcuST3JtTNy9SQk= =T76L -----END PGP SIGNATURE----- Merge tag 'driver-core-7.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core Pull driver core fix from Danilo Krummrich: - Suppress spurious "debugfs is not initialized yet" boot warnings when the caller passes an error parent to debugfs file creation; callers propagating an earlier failure should not trigger the warning * tag 'driver-core-7.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: debugfs: don't warn about uninitialized debugfs for an error parent |
||
|
Linus Torvalds
|
64d34cef2a |
i2c-fixes for v7.3-rc5
- qcom-geni: select the correct source clock table entry -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCarjo1AAKCRDaeAVmJtMt bkwAAP9RaXfP3wNy+pcmfLXGDO1T3aG0ae4IdBQaGLAyvifmQAEA7Mlqctd1/6fY GpCVypBnha4BFoqhtV456RMnZHs2KgU= =0TbV -----END PGP SIGNATURE----- Merge tag 'i2c-fixes-7.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux Pull i2c fix from Andi Shyti: - qcom-geni: select the correct source clock table entry * tag 'i2c-fixes-7.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux: i2c: qcom-geni: Fix hardcoded clock index in SE_GENI_CLK_SEL |
||
|
Linus Torvalds
|
104484baf7 |
workqueue: Fixes for v7.3-rc4
- Fix a NULL dereference in the flush dependency check when a worker flushes outside a work item, such as from the OOM path during worker creation. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCarjXAw4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGa2RAQCDvPDErwcBmDHdeAMr6Rr0pXzDf2pYa6LdLL0B XIPCzQD/Y8d3woLh3/CDUfjpkQE/x7QkWj6paZbiILNcenaA+Ac= =wYPe -----END PGP SIGNATURE----- Merge tag 'wq-for-7.3-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: - Fix a NULL dereference in the flush dependency check when a worker flushes outside a work item, such as from the OOM path during worker creation * tag 'wq-for-7.3-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Fix NULL current_pwq deref in flush dependency check |
||
|
Linus Torvalds
|
b1fa457bdd |
cgroup: Fixes for v7.3-rc4
- A cpuset partition could claim CPUs an ancestor partition already held exclusively. Restore the rejection an earlier change had turned into a warning. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCarjXAw4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGctVAQD3UPz2537MRkVZtcy4QfgyObMRXEaTGEBBJV+g ougCLgD/ZOVFjyK/bD3wXgtpiRZq9NbL+VvPQfrOjqz3Q/wVww8= =Vyrg -----END PGP SIGNATURE----- Merge tag 'cgroup-for-7.3-rc4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: - A cpuset partition could claim CPUs an ancestor partition already held exclusively. Restore the rejection an earlier change had turned into a warning. * tag 'cgroup-for-7.3-rc4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup/cpuset: Return PERR_NOCPUS in remote_partition_enable() on subpartitions_cpus conflict |
||
|
Linus Torvalds
|
7cdf91542e |
sched_ext: Fixes for v7.3-rc4
- The CPU topology helper for BPF schedulers took no buffer size, so its structure couldn't grow without breaking schedulers built against the older layout. Add a size argument. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCarjW+w4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGX2cAP0VlU9fUs+6zw+CPEvxDfRClCsMvwpbHEh9EtFQ 1csnhQD+KnIhvmascPtuZLhcYScKfA9ZvvYw/Nme7RVmQ/I8HA8= =UsTG -----END PGP SIGNATURE----- Merge tag 'sched_ext-for-7.3-rc4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext fix from Tejun Heo: - The CPU topology helper for BPF schedulers took no buffer size, so its structure couldn't grow without breaking schedulers built against the older layout. Add a size argument. * tag 'sched_ext-for-7.3-rc4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext: Add a size argument to scx_bpf_cid_topo() so struct scx_cid_topo can grow |
||
|
Linus Torvalds
|
efb44d93a6 |
x86 fixes:
- Fix preemption bugs in the SVSM vTPM guest implementation
(Melody Wang)
- Fix MCE-triggered hardware debug register corruption on
task migration (Masami Hiramatsu)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=1sLJ
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix preemption bugs in the SVSM vTPM guest implementation
(Melody Wang)
- Fix MCE-triggered hardware debug register corruption on
task migration (Masami Hiramatsu)
* tag 'x86-urgent-2026-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Fix hardware debug register corruption on task migration
x86/sev: Make vTPM SVSM calls preemption-safe
|
||
|
Linus Torvalds
|
673dab7eac |
Scheduler fixes:
- Fix LLC mis-scheduling bugs (Tim Chen, Lu Wang)
- Fix cache-grouping related scheduling statistics UAF bugs (Tim Chen)
- Skip kernel threads for cache aware scheduling to rubustify the code
(Chen Yu)
- Refresh LLC capacity across CPU hotplug, to fix capacity
underestimation bug (Davi Chaves Azevedo)
- Account PSI IRQ time to the execution context, not the scheduling
context, to fix proxy scheduling accounting bug (Zhan Xusheng)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2067
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix LLC mis-scheduling bugs (Tim Chen, Lu Wang)
- Fix cache-grouping related scheduling statistics UAF bugs (Tim Chen)
- Skip kernel threads for cache aware scheduling to rubustify the code
(Chen Yu)
- Refresh LLC capacity across CPU hotplug, to fix capacity
underestimation bug (Davi Chaves Azevedo)
- Account PSI IRQ time to the execution context, not the scheduling
context, to fix proxy scheduling accounting bug (Zhan Xusheng)
* tag 'sched-urgent-2026-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Account PSI IRQ time to the execution context, not the scheduling context
sched/cache: Refresh LLC capacity across CPU hotplug, to fix capacity underestimation bug
sched/cache: Skip kernel threads for cache aware scheduling to rubustify the code
sched/cache: Introduce task_struct->sched_cache_grp to fix UAF
sched/cache: Decouple sched_cache_group from mm to fix UAF
sched/cache: Honor migrate_llc_task semantics in active load balance, to fix LLC mis-scheduling bug
sched/cache: Keep nr_pref_llc_running in the runnable domain, to fix LLC mis-scheduling bug
|
||
|
Linus Torvalds
|
5ccda18d1b |
Perf events fixes:
- Fixes for KVM guest PEBS virtualization (Sean Christopherson)
- Fixes for various Intel PMUs related to PEBS data-source
(Dapeng Mi)
- Fix Intel Panther Cove event scheduling constraints (Dapeng Mi)
- Fix Intel DMR/NVL OMR extra registers event scheduling (Dapeng Mi)
- Rename two confusingly named PMU attributes (Dapeng Mi)
- Fix a refcount leak in attach_perf_ctx_data() (Namhyung Kim)
- Fix NULL pointer dereference crash in __perf_pmu_sched_task()
(Puranjay Mohan)
- Fix CPU-wide event scheduling (Puranjay Mohan)
- Fix x86 LBR branch entry generation (Puranjay Mohan)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ggeg
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2026-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fixes for KVM guest PEBS virtualization (Sean Christopherson)
- Fixes for various Intel PMUs related to PEBS data-source (Dapeng Mi)
- Fix Intel Panther Cove event scheduling constraints (Dapeng Mi)
- Fix Intel DMR/NVL OMR extra registers event scheduling (Dapeng Mi)
- Rename two confusingly named PMU attributes (Dapeng Mi)
- Fix a refcount leak in attach_perf_ctx_data() (Namhyung Kim)
- Fix NULL pointer dereference crash in __perf_pmu_sched_task()
(Puranjay Mohan)
- Fix CPU-wide event scheduling (Puranjay Mohan)
- Fix x86 LBR branch entry generation (Puranjay Mohan)
* tag 'perf-urgent-2026-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fill branch entries with a single assignment
perf/core: Run sched_task() for PMUs with only CPU-wide events
perf/core: Fix NULL pmu_ctx passed to pmu->sched_task()
perf/core: Fix a refcount leak in attach_perf_ctx_data()
perf/x86/intel: Rename NVL offcore_rsp attribute to offmodule_rsp
perf/x86/intel: Rename DMR offcore_rsp attribute to offmodule_rsp
perf/x86/intel: Fix precise OMR event scheduling for DMR/NVL
perf/x86/intel: Constrain Panther Cove UOPS_DISPATCHED events to PMCs 0-3
perf/x86/intel: Delete dead NVL PEBS data-source initcall
perf/x86/intel: Fix Panther Cove PEBS data-source snoop states
perf/x86/intel: Remove incorrect Panther Cove PEBS data-source constraints
perf/x86/intel: Remove incorrect LionCove PEBS data-source constraints
perf/x86/intel: Update arw_latency_data() mem-op direction handling
perf/x86/intel: Fix DKT PEBS load/store direction for latency events, to fix sample classification
perf/x86/intel: Fix CMT PEBS load/store direction for latency events, to fix sample classification
perf/x86/intel: Fix GRT PEBS load/store direction for latency events, to fix sample classification
perf/x86/intel: Make @data a mandatory param for intel_guest_get_msrs()
perf/x86/intel: Don't pointlessly context switch DS_AREA (and PEBS config) if PEBS is unused
perf/x86/intel: Don't write PEBS_ENABLED on host<=>guest xfers if CPU has PEBS isolation, to fix stuck PEBS_ENABLED
perf/x86/intel: Ensure KVM guest PEBS path doesn't set unwanted PERF_GLOBAL_CTRL bits
|
||
Pavankumar Kondeti
|
db6365ced4 |
workqueue: Fix NULL current_pwq deref in flush dependency check
check_flush_dependency() uses current_wq_worker() to determine whether
the caller is a workqueue worker and then dereferences worker->current_pwq
to test whether the current workqueue is WQ_MEM_RECLAIM.
current_wq_worker() only means that %current has PF_WQ_WORKER set. A
kworker can reach check_flush_dependency() while it is not executing a
work item. One such path is worker_thread() acting as the pool manager,
where create_worker() does GFP_KERNEL allocation and the allocation path
invokes the OOM notifier. In that state worker->current_pwq is NULL
because current_pwq is set only by process_one_work() and cleared again
after the work function returns.
[ 416.760634][ T375] Call trace:
[ 416.760638][ T375] check_flush_dependency+0x80/0x120 (P)
[ 416.760648][ T375] __flush_work+0x98/0x224
[ 416.760657][ T375] flush_work+0x30/0x44
[ 416.760665][ T375] ...
[ 416.760710][ T375] blocking_notifier_call_chain+0x58/0xa0
[ 416.760719][ T375] out_of_memory+0xb4/0x458
[ 416.760730][ T375] __alloc_pages_may_oom+0x11c/0x1a8
[ 416.760739][ T375] __alloc_pages_slowpath+0x314/0x46c
[ 416.760746][ T375] __alloc_frozen_pages_noprof+0x110/0x1a4
[ 416.760753][ T375] new_slab+0x12c/0x484
[ 416.760759][ T375] ___slab_alloc+0x7a8/0xc7c
[ 416.760765][ T375] __slab_alloc+0x74/0xd8
[ 416.760772][ T375] __kmalloc_cache_node_noprof+0x2ac/0x304
[ 416.760779][ T375] alloc_worker+0x28/0x60
[ 416.760785][ T375] create_worker+0x4c/0x20c
[ 416.760790][ T375] worker_thread+0xe8/0x2b8
[ 416.760796][ T375] kthread+0x1a8/0x200
[ 416.760805][ T375] ret_from_fork+0x10/0x20
Guard the WQ_MEM_RECLAIM-worker warning with worker->current_pwq. If the
kworker is not currently executing a work item, there is no current
workqueue to diagnose with that warning. The PF_MEMALLOC warning is left
unchanged so explicit reclaim context flushing a !WQ_MEM_RECLAIM target
is still reported.
Fixes:
|
||
Tejun Heo
|
94480606a6 |
sched_ext: Add a size argument to scx_bpf_cid_topo() so struct scx_cid_topo can grow
scx_bpf_cid_topo() copies struct scx_cid_topo into a buffer the BPF program
sized from its own vmlinux.h while the verifier sizes the write from the
running kernel's BTF. The struct may grow and each growth then breaks every
scheduler built against the older layout, rejected at load or written past
its buffer. This is the usual hole for a struct handed to BPF, closed
elsewhere with a size argument, and it was missed here.
Take the buffer size, copy the smaller of it and the kernel's struct and set
the rest to -1. Accesses to the copy are CO-RE relocated, so the struct can
grow by appending fields, which its comment now states. The kfunc changes in
place: the cid interface is still being finalized and no released scheduler
uses the current form.
Fixes:
|
||
|
Linus Torvalds
|
fd179f8a05 |
ata fixes for 7.3-rc5
- Extend the quirk "no LPM on ATI" quirk, that is currently only
applied for Samsung drives, to include AMD controllers as well.
The AMD AHCI controllers are newer versions of the ATI AHCI
controllers, and these controllers still have LPM issues with
Samsung drives - LPM works with drives from other vendors (me)
- Fix errors in the libata.force parameter documentation (me)
- Verify the sense data descriptor lengths for ATA PASS-THROUGH
command, so that a malicious device cannot write past the buffer
length (Matthias)
- Mention the libata for-next branch in MAINTAINERS such that the
git ls-remote command done by get_maintainer.pl --self-test=scm
can verify it (Matthias)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCargFGAAKCRDJZDGjmcZN
cm3QAP97hnUqqmFfM20u4KSVo/1KV93S/uJ4kVGdsDf5HNvsZgEApw/OlB7lZ8dE
hZ3otv4Yv1bxC4rdOs6RIJrz8aDCBQU=
=q1Z4
-----END PGP SIGNATURE-----
Merge tag 'ata-7.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Extend the quirk "no LPM on ATI" quirk, that is currently only
applied for Samsung drives, to include AMD controllers as well.
The AMD AHCI controllers are newer versions of the ATI AHCI
controllers, and these controllers still have LPM issues with
Samsung drives - LPM works with drives from other vendors (me)
- Fix errors in the libata.force parameter documentation (me)
- Verify the sense data descriptor lengths for ATA PASS-THROUGH
command, so that a malicious device cannot write past the buffer
length (Matthias)
- Mention the libata for-next branch in MAINTAINERS such that the
git ls-remote command done by get_maintainer.pl --self-test=scm
can verify it (Matthias)
* tag 'ata-7.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
MAINTAINERS: name the libata/linux for-next branch
ata: libata-scsi: bound the ATA passthru sense descriptor writes
ata: libata: Correct libata.force parameter documentation
ata: libata-core: Extend Samsung LPM quirk to AMD controllers
|
||
Hui Peng
|
31c88350b7 |
cgroup/cpuset: Return PERR_NOCPUS in remote_partition_enable() on subpartitions_cpus conflict
When a remote partition is created underneath an existing local partition via a non-partition (PRS_MEMBER) intermediate cgroup, update_prstate() sees parent->partition_root_state == PRS_MEMBER and calls remote_partition_enable(). Commit |
||
|
Linus Torvalds
|
fddfc3ec31 |
pci-v7.3-fixes-2
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmq38q4UHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vwVFhAAhO4zr6WHzB/Tx87FGSxYnjrwzOmH nS/w0MD0FxPkAzhbkPaXkdgAks10dBNF/umQUXvWBwgZYbR9v0CoZBSm8viuq/8C tYOdOm4u4whsHVPU1QJPV5nUSGb2Eiq7vza+2kS1Ll0xy/3/24yVn+IU8sy4EcgX IUTwApHfBGq6se88LxtdT5ctAUCRSP8XAeFlKXqfPig9yrrQOZ0cJrA5nhbe4jCL jJMFjgH12OvR55ZeKyZianz/lCZ8NcyATblM0EUCVKpx1gv4BcPfbprcycgnyLbw R+SoPl0wJDWKGqwuCFYkLMaT4XsLYnJv+6C/aQQ8CJjovAVUzaeDXwlJzPP3hH+N iIZp3b5tULHK/c/AykjoRQPq/rVy9ywMvlqmafIeR4+BEJBVYlUGLhum14pnjAQo B/wLCSmxrP7K7E+71ODunUdpts6HsH+GbKqSjBS46BAY/Vw+icq0v5RxaIaa6WCv BEkVEIfcJ/pnlmxMCoQEVu0bjCrIIaTe7EflO4BDhEIrWTxSq19vCVlXB+XgsHUI DWPyCFnAWFG5bZi50PKkrwTOhmcRMRgAjc69DOZ400chbuMAj9PxpomYBEeWvnss N+DLTLL2Yp4Y8/tMJIxjNB2eAbiSKql2EoGIpyjQruDRmg1Bcug5gBY90RjRr204 afoNJYCbtPnd0mY= =hhCg -----END PGP SIGNATURE----- Merge tag 'pci-v7.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI fixes from Bjorn Helgaas: - Make BAR resize work even for devices where no upstream bridge is visible to the OS, which fixes an amdgpu regression on SolidRun HoneyComb, which doesn't expose Root Ports to the OS (Liz Fong-Jones) - Omit bus properties in dynamic OF nodes when a bridge has no subordinate bus, which fixes early boot hangs caused by NULL pointer dereferences with CONFIG_PCI_DYNAMIC_OF_NODES enabled (Angel J) - Disable enhanced atomics on AMD NBIO 7.7 and 7.11 to avoid silent data corruption on 64-bit DMAs (Mario Limonciello) * tag 'pci-v7.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: x86/PCI: Disable enhanced atomics on AMD NBIO 7.7 and 7.11 PCI: of_property: Omit bus properties without a subordinate bus PCI: Fix BAR resize for devices on a root bus |
||
|
Linus Torvalds
|
efb27d4767 |
Probes fixes for v7.3-rc4:
- kprobes: Fix permanent hang when flushing the kprobe optimizer Fix a deadlock when disabling kprobe optimization via sysctl or debugfs where flushers hung waiting for optimizer_completion. Replaced the completion with an optimizer_passes counter and wait_var_event_mutex() under kprobe_mutex so concurrent flushers can wait and wake up safely. - fprobe: Terminate the fgraph_data list when the reservation is not filled Fix an issue where unused shadow stack data left uninitialized by fprobe_fgraph_entry() was misparsed as stale fprobe headers on return. Explicitly write a zero word to terminate the list and update read_fprobe_header() to handle the zeroed slot properly. - ftracetest: Fix unique symbol check in kprobe_non_uniq_symbol.tc Fix false test failures in kprobe_non_uniq_symbol.tc on architectures like s390 where a symbol exists once in core kernel but also in modules. Anchor the /proc/kallsyms search regex to the end of the line so that module symbols are not incorrectly counted. -----BEGIN PGP SIGNATURE----- iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmq3llUbHG1hc2FtaS5o aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bAhEH/0EAamjv7/EDUoUq+BOO a2gnlYqvr+zcrDVQLNgiYbvTRDfIFPOdB2LpY7Rguee3747qeL7kkNATD10WFr1F 5lXe5LaLncNIrvHDdtcT5eER5ePAuSDMSL5CwnJrRvXJw42iFsqegZ07nrvc9HFS 5zw7Ej9VnFJFxeXIY3J4U92wkntLJ3JhsNheomOtQmEZU1g5ZPAbdq0icNrC3CAb FTezYk60VG0CT/gNTSd8JFnI4P5vKlZpkFFCLLMmptW4yQU9+ZdT55JRgY7wJ8ye w5rLBTRJrFhDgNAjoehMkoAtxik3dKgede7qlwxUk0sv+gwXssw28b5zabRBJgee XQ8= =cHwO -----END PGP SIGNATURE----- Merge tag 'probes-fixes-v7.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probe fixes from Masami Hiramatsu: - kprobes: Fix permanent hang when flushing the kprobe optimizer Fix a deadlock when disabling kprobe optimization via sysctl or debugfs where flushers hung waiting for optimizer_completion. Replaced the completion with an optimizer_passes counter and wait_var_event_mutex() under kprobe_mutex so concurrent flushers can wait and wake up safely. - fprobe: Terminate the fgraph_data list when the reservation is not filled Fix an issue where unused shadow stack data left uninitialized by fprobe_fgraph_entry() was misparsed as stale fprobe headers on return. Explicitly write a zero word to terminate the list and update read_fprobe_header() to handle the zeroed slot properly. - ftracetest: Fix unique symbol check in kprobe_non_uniq_symbol.tc Fix false test failures in kprobe_non_uniq_symbol.tc on architectures like s390 where a symbol exists once in core kernel but also in modules. Anchor the /proc/kallsyms search regex to the end of the line so that module symbols are not incorrectly counted. * tag 'probes-fixes-v7.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: kprobes: Fix permanent hang when flushing the kprobe optimizer fprobe: Terminate the fgraph_data list when the reservation is not filled selftests/ftrace: Fix unique symbol check in kprobe_non_uniq_symbol.tc |
||
|
Linus Torvalds
|
eff8d2791c |
Arm:
- Invalidate the ITS translation cache when the guest changes the
base address of the ITS tables (Fuad Tabba)
- Skip saving ITS devices with device IDs that are out-of-bounds
rather than failing the entire ITS save ioctl (Fuad Tabba)
- Close race between VM teardown and invalidations of nested MMUs
when handling MMU operations that are allowed to block
(Lorenzo Stoakes)
- Various fixes for the handling of the host's untrusted SVE
configuration in pKVM (Fuad Tabba)
- Make sure that empty SMCCC ranges based at 0 are rejected by the
kvm_smccc_set_filter() (Karl Mehltretter)
- Revoke the host mapping for pKVM's private stack pages, along
with a new sanity check that all mappings in the hyp's private
VA range have been correctly marked as hyp-owned (Fuad Tabba)
- Lifetime fixes for the array of shadow stage-2 MMUs, ensuring that
concurrent vCPU initialization cannot relocate in-use MMUs. Defer
the freeing of shadow stage-2 MMUs to the point that no other users
(e.g. MMU notifier) could reference them (Marc Zyngier)
- Drop useless WARN when rejecting an unsupported ioctl for pKVM
(Fuad Tabba)
- Fix the steal_time selftest to install correctly-sized mappings for
non-4K hosts (Sebastian Ott)
- Correct mapping of fine-grained trap for GCSPOPX instruction
(Mark Brown)
- Fix KVM_BUG_ON() due to missing handling of DBGBXVR<n> from 32-bit
guests (Karl Mehltretter)
RISC-V:
- Synchronize hrtimer during VCPU teardown.
- Fix the conversion between vsip and hvip values.
- Serialize IMSIC attributes with vCPU migration.
- Release unused page after MMU invalidation.
- Propagate interrupted G-stage faults to KVM user-space as EINTR.
- Fix nested acceleration hfence entry update order.
- Fix sdata leak and stale snapshot_addr in snapshot_set_shmem.
- Preserve firmware counter value across PMU counter stop/start.
- Report PMU snapshot write failure to the guest.
- Fix perf-backed counter accounting across PMU stop and read.
- Correctly propagate error of a hart status SBI call.
s390:
- Ensure that accesses through kvm_arch_set_irq_inatomic mark as dirty
the pages that contain indicator and summary bits.
- Fix compile warning for kvm_s390_update_cmma_dirty().
- Fix incorrect propagation of ENOENT from _gaccess_shadow_fault() to
userspace.
- Move s390_kvm_mmu_commit_memory_region() into
s390_kvm_mmu_prepare_memory_region() so that it can fail instead of WARN.
- Add missing srcu in kvm_s390_set_irq_state().
- Fix potential races in storage functions.
- Fix race in _destroy_pages_crste().
- Fix issues in the handling of KVM interrupt and page resources, when a
queue that is assigned to a mediated device (mdev) is removed from the
host's AP configuration.
- Fix loop condition in uv_find_secrets.
- Prevent potential out-of-bounds read.
x86:
- Fix a brown paper bag bug where KVM would incorrectly treat Intel PMU MSRs
as valid on AMD.
- Fix a regression in the hardware disable selftest where it checked the wrong
macro when detecting glibc support (breaks at least musl).
- Never clear KVM_REQ_VM_DEAD so that dead VMs stay dead, which is especially
important for KVM_BUG_ON() flows, which often guard more dangerous bugs.
- Re-pend GET_NESTED_STATE_PAGES if getting the pages fails, to fix a bug
where KVM would let userspace run a broken setup with stale vmcs12 pages.
- Fix a class of bugs where KVM would fail to fill kvm_run exit fields if
getting nested pages failed.
- Treat reserved entries in the memory attributes xarray as "no attributes",
to fix false positives when checking for mixed attributes.
- Fix memcg accounting for the memory attributes xarray (the xarray library
subtly requires the xarray to be configured for accounting upfront; the gfp
flags taken at runtime are used only rarely).
- Don't pre-reserve xarray entries when storing empty attributes, as storing
NULL must not require memory allocation (KVM and other subsystems heavily
rely on this behavior).
- Fix a memory leak and a cache maintenance issue related to doing intra-host
migration on an SEV guest.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmq3Ta0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMcygf/Z8GovgUACbWs/PSgVxZr5++MsbnM
/N+vUP0VhsBxWCt191fBmKSBMNyTL734CKe0fkmisIAIPxf63uA3lttfMshNXKct
VJ3TQkbA7qiSEGf2Um1dp4k6egqDDbTS1a4NF7CM7AEL4Wm3YDfqv2h4rZicEBsd
Spy4yV8sKoiEHMnduhF2m5r0cWkrj194e2dolJy0p1WiNeEykf/nMTmNq5JWusBh
TDDzZf1p2BianOmQ6+fkzAfWDSIdv0OPmoH7iqvQ/xhvm4dLWq2oeOz5Q2/uWAp0
BqU4Z5zBrGRUWyXM0cDZEqBfmNH4v7oR9PfLgvD4qpMoqONuMj1+mIO68A==
=XtLD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Invalidate the ITS translation cache when the guest changes the
base address of the ITS tables (Fuad Tabba)
- Skip saving ITS devices with device IDs that are out-of-bounds
rather than failing the entire ITS save ioctl (Fuad Tabba)
- Close race between VM teardown and invalidations of nested MMUs
when handling MMU operations that are allowed to block (Lorenzo
Stoakes)
- Various fixes for the handling of the host's untrusted SVE
configuration in pKVM (Fuad Tabba)
- Make sure that empty SMCCC ranges based at 0 are rejected by the
kvm_smccc_set_filter() (Karl Mehltretter)
- Revoke the host mapping for pKVM's private stack pages, along with
a new sanity check that all mappings in the hyp's private VA range
have been correctly marked as hyp-owned (Fuad Tabba)
- Lifetime fixes for the array of shadow stage-2 MMUs, ensuring that
concurrent vCPU initialization cannot relocate in-use MMUs. Defer
the freeing of shadow stage-2 MMUs to the point that no other users
(e.g. MMU notifier) could reference them (Marc Zyngier)
- Drop useless WARN when rejecting an unsupported ioctl for pKVM
(Fuad Tabba)
- Fix the steal_time selftest to install correctly-sized mappings for
non-4K hosts (Sebastian Ott)
- Correct mapping of fine-grained trap for GCSPOPX instruction (Mark
Brown)
- Fix KVM_BUG_ON() due to missing handling of DBGBXVR<n> from 32-bit
guests (Karl Mehltretter)
RISC-V:
- Synchronize hrtimer during VCPU teardown
- Fix the conversion between vsip and hvip values
- Serialize IMSIC attributes with vCPU migration
- Release unused page after MMU invalidation
- Propagate interrupted G-stage faults to KVM user-space as EINTR
- Fix nested acceleration hfence entry update order
- Fix sdata leak and stale snapshot_addr in snapshot_set_shmem
- Preserve firmware counter value across PMU counter stop/start
- Report PMU snapshot write failure to the guest
- Fix perf-backed counter accounting across PMU stop and read
- Correctly propagate error of a hart status SBI call
s390:
- Ensure that accesses through kvm_arch_set_irq_inatomic mark as
dirty the pages that contain indicator and summary bits
- Fix compile warning for kvm_s390_update_cmma_dirty()
- Fix incorrect propagation of ENOENT from _gaccess_shadow_fault() to
userspace
- Move s390_kvm_mmu_commit_memory_region() into
s390_kvm_mmu_prepare_memory_region() so that it can fail instead of
WARN
- Add missing srcu in kvm_s390_set_irq_state()
- Fix potential races in storage functions
- Fix race in _destroy_pages_crste()
- Fix issues in the handling of KVM interrupt and page resources,
when a queue that is assigned to a mediated device (mdev) is
removed from the host's AP configuration
- Fix loop condition in uv_find_secrets
- Prevent potential out-of-bounds read
x86:
- Fix a brown paper bag bug where KVM would incorrectly treat Intel
PMU MSRs as valid on AMD
- Fix a regression in the hardware disable selftest where it checked
the wrong macro when detecting glibc support (breaks at least musl)
- Never clear KVM_REQ_VM_DEAD so that dead VMs stay dead, which is
especially important for KVM_BUG_ON() flows, which often guard more
dangerous bugs
- Re-pend GET_NESTED_STATE_PAGES if getting the pages fails, to fix a
bug where KVM would let userspace run a broken setup with stale
vmcs12 pages
- Fix a class of bugs where KVM would fail to fill kvm_run exit
fields if getting nested pages failed
- Treat reserved entries in the memory attributes xarray as "no
attributes", to fix false positives when checking for mixed
attributes
- Fix memcg accounting for the memory attributes xarray (the xarray
library subtly requires the xarray to be configured for accounting
upfront; the gfp flags taken at runtime are used only rarely)
- Don't pre-reserve xarray entries when storing empty attributes, as
storing NULL must not require memory allocation (KVM and other
subsystems heavily rely on this behavior)
- Fix a memory leak and a cache maintenance issue related to doing
intra-host migration on an SEV guest"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (54 commits)
KVM: SEV: Do cache maintenance on the source VM during intra-host migration
KVM: SEV: Free have_run_cpus during VM destruction even if VM is no longer SEV
KVM: Don't pre-reserve xarray entries when storing empty/NULL attributes
KVM: Ensure memory attributes xarray nodes are accounted to the caller's memcg
KVM: Don't treat reserved xarray entries as having memory attributes
KVM: x86: Fill kvm_run exit fields in common get_nested_state_pages() error paths
KVM: x86: Re-pend GET_NESTED_STATE_PAGES if getting said pages fails
KVM: arm64: Fix AArch32 DBGBXVR<n> handling
KVM: arm64: Fix FGT mapping for HFGITR_EL2.nGCSEPP
KVM: selftests: fix steal_time for arm64 with host page size > 4K
KVM: arm64: Don't WARN on an unknown VM ioctl in protected mode
KVM: arm64: nv: Delay freeing of shadow S2 structures until VM destruction
KVM: arm64: nv: Fix life cycle of the nested_mmus array
KVM: arm64: Check every private mapping is hyp-owned at pKVM init
KVM: arm64: Move the private VA allocation cursor to __io_map_next
KVM: arm64: Match hyp text by physical address in fix_host_ownership()
KVM: arm64: Transfer the hyp stack pages out of the host stage-2
KVM: arm64: selftests: Test empty SMCCC filter range at base 0
KVM: arm64: Return -EINVAL for an empty SMCCC filter range at base 0
KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2
...
|
||
Paolo Bonzini
|
c2f24f140c |
KVM fixes for 7.3-rcN
- Fix a brown paper bag bug where KVM would incorrectly treat Intel PMU MSRs
as valid on AMD.
- Fix a regression in the hardware disable selftest where it checked the wrong
macro when detecting glibc support (breaks at least musl).
- Never clear KVM_REQ_VM_DEAD so that dead VMs stay dead, which is especially
important for KVM_BUG_ON() flows, which often guard more dangerous bugs.
- Re-pend GET_NESTED_STATE_PAGES if getting the pages fails, to fix a bug
where KVM would let userspace run a broken setup with stale vmcs12 pages.
- Fix a class of bugs where KVM would fail to fill kvm_run exit fields if
getting nested pages failed.
- Treat reserved entries in the memory attributes xarray as "no attributes",
to fix false positives when checking for mixed attributes.
- Fix memcg accounting for the memory attributes xarray (the xarray library
subtly requires the xarray to be configured for accounting upfront; the gfp
flags taken at runtime are used only rarely).
- Don't pre-reserve xarray entries when storing empty attributes, as storing
NULL must not require memory allocation (KVM and other subsystems heavily
rely on this behavior).
-----BEGIN PGP SIGNATURE-----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=LG0B
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-7.3-rc5' of https://github.com/kvm-x86/linux into HEAD
KVM fixes for 7.3-rcN
- Fix a brown paper bag bug where KVM would incorrectly treat Intel PMU MSRs
as valid on AMD.
- Fix a regression in the hardware disable selftest where it checked the wrong
macro when detecting glibc support (breaks at least musl).
- Never clear KVM_REQ_VM_DEAD so that dead VMs stay dead, which is especially
important for KVM_BUG_ON() flows, which often guard more dangerous bugs.
- Re-pend GET_NESTED_STATE_PAGES if getting the pages fails, to fix a bug
where KVM would let userspace run a broken setup with stale vmcs12 pages.
- Fix a class of bugs where KVM would fail to fill kvm_run exit fields if
getting nested pages failed.
- Treat reserved entries in the memory attributes xarray as "no attributes",
to fix false positives when checking for mixed attributes.
- Fix memcg accounting for the memory attributes xarray (the xarray library
subtly requires the xarray to be configured for accounting upfront; the gfp
flags taken at runtime are used only rarely).
- Don't pre-reserve xarray entries when storing empty attributes, as storing
NULL must not require memory allocation (KVM and other subsystems heavily
rely on this behavior).
|
||
Sean Christopherson
|
93de2a6a4b |
KVM: SEV: Do cache maintenance on the source VM during intra-host migration
Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.
Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.
Fixes:
|
||
|
Sean Christopherson
|
12c1f6e03f |
KVM: SEV: Free have_run_cpus during VM destruction even if VM is no longer SEV
Unconditionally free SEV's "have run CPUs" cpumask in the VM destroy path,
i.e. even for what appear to be non-SEV VMs, as an SEV VM becomes a non-SEV
VM if its state is intra-host migrated. Alternatively, the mask could be
freed in sev_migrate_from() when "converting" the source VM, but that gets
annoying because ideally KVM would nullify the mask to guard against UAF,
and nullifying the mask would need be conditioned on CPUMASK_OFFSTACK=y.
Freeing the mask during sev_migrate_from() is also not robust against other
KVM bugs, though that's kind of a moot point since any such bugs would show
up even if sev->active is never set. I.e. KVM must get that side of things
correct. But, that's not a great reason to add more code just to make
things marginally less robust.
Fixes:
|
||
|
Linus Torvalds
|
6812ce4e43 |
drm fixes for 7.3-rc5
client: - fix restore of partially initialized client i915: - Fix incorrect RCU teardown order leading to endless loop - Fix DP MST TU and FEC handling for disconnected streams - Fix selective fetch disable, again - Fix export namespace for kunit helpers - Workaround eDP flicker on a specific laptop model xe: - CRI throttle reasons report - TLB invalidation at wedge - SVM eviction and VM close - Display corruption on LNL on Xen PV - W/a fix and addition amdgpu: - Display ref count fix - Userq fixes - VCN 4, 5 reset fixes - Fixes for various error paths - Stack frame size fixes for various combinations of compilers and configs amdkfd: - Possible UAF fix nouveau: - runtime suspend/resume fixes for newer firmware - rcu free the scheduler - fix VRAM pinning - fix double free - fix reference leaks - fix runtime PM leak - fix cursor list usage problems - fix HDMI config rejection without SCDC virtio: - fix a bunch of object/memory leaks in failure paths - add pixel blend mode property to cursor plane - revert prime buffers import - sync shmem backing on guest transfers imagination: - propogate map failures properly - fix page count in map interface - clamp freelist reconstruction requests ivpu: - use separate flag for job timeout bridge: - samsung-dsim: fix TE GPIO lifetime for host attach -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmq29FYACgkQDHTzWXnE hr4pnw/+JhcAdts2saCNt/j7EtD6DqXJvyfo4BVyjYCSVP3YEZuZCrpBJh02UUUo sU8MgjmzwXHRxflTk8DLQMMKhN7cvFmzdREro5x7gJkCi2m/x3eanafQJS0iyvqN rl+K+rVeEmrOELN7auNFSl3kBtvR9yvbPZtBKNNe1IhCSq/iWKm5I4HLwP85diJZ OHOPuXXh+QFhtXsbwH3p1NsbWb/Kiovbevqitd/X/9CFZRMiiwuy5QFX8xOAW4CR 0id0njQPWVbLupuqZRGSDMAsqiVq/ClKIb8X0uMzU92y6l8oMsamPXxbs7Z6pfsT d8k9+zMP0LXXkwdS/sTI/9axJ5LZmd4mqEL+iAkoKkO2EGnDerzyklOCWtk38qvc qpjhQDW77AGLoQbISKZzI2Ce9B3RotdDghyd0Bt++GJegKQAAvevEQKNzWVvlMd3 aQcpI/EKf1PXJnX44LtDqNmoEmmEy4fKOICu52GzpPYOGaSQL25tuA7/KGNX35D8 hY7KiJRYaPcU0hAwAPLvQDHUvFBhDJD4BHGO01YOZ0fZzBARwE57Hwp3hxkHez64 CbcVZ5bzTREmZ3KHKI79OMhKUfCbq+E6YoJ1jxSDs902LWTrULx/iMCA+7NTZL1U f/9nIe2fkA0/D+++CraKd+HYkfdxvZZwuRuZtp5jWqRLxB4bdes= =oRa2 -----END PGP SIGNATURE----- Merge tag 'drm-fixes-2026-09-26' of https://gitlab.freedesktop.org/drm/kernel Pull drm fixes from Dave Airlie: "While most of this is AI inspired fixes for error handling paths, leaks and use after frees, there are some normal things. nouveau has probably the biggest changes with some fixes to stabilise runtime suspend/resume on 570 firmware which regressed after we moved from 535, there are some fixes to stackframe issues seen with amdgpu, and otherwise the usual bunch of i915/xe/amdgpu fixes, and some virtio-gpu fixes. Hopefully it will start to quiten down a bit from here. client: - fix restore of partially initialized client i915: - Fix incorrect RCU teardown order leading to endless loop - Fix DP MST TU and FEC handling for disconnected streams - Fix selective fetch disable, again - Fix export namespace for kunit helpers - Workaround eDP flicker on a specific laptop model xe: - CRI throttle reasons report - TLB invalidation at wedge - SVM eviction and VM close - Display corruption on LNL on Xen PV - W/a fix and addition amdgpu: - Display ref count fix - Userq fixes - VCN 4, 5 reset fixes - Fixes for various error paths - Stack frame size fixes for various combinations of compilers and configs amdkfd: - Possible UAF fix nouveau: - runtime suspend/resume fixes for newer firmware - rcu free the scheduler - fix VRAM pinning - fix double free - fix reference leaks - fix runtime PM leak - fix cursor list usage problems - fix HDMI config rejection without SCDC virtio: - fix a bunch of object/memory leaks in failure paths - add pixel blend mode property to cursor plane - revert prime buffers import - sync shmem backing on guest transfers imagination: - propogate map failures properly - fix page count in map interface - clamp freelist reconstruction requests ivpu: - use separate flag for job timeout bridge: - samsung-dsim: fix TE GPIO lifetime for host attach" * tag 'drm-fixes-2026-09-26' of https://gitlab.freedesktop.org/drm/kernel: (60 commits) drm/amd/display: Bump frame warning limit for all builds of dml drm/imagination: clamp freelist reconstruction requests drm/imagination: Fix page count for page table for map() interface drm/imagination: Propagate map failures correctly from pvr_mmu_map_sgl() drm/amd/display: Bump frame warning limit for clang builds of dml drm/amd/display: Relax DML frame limit with UBSAN drm/amdgpu: Fix runtime PM leak in amdgpu_debugfs_test_ib_show() drm/amdgpu: Fix last_update fence leak in amdgpu_vm_init() drm/amdgpu: Fix acpi device leak in amdgpu_acpi_enumerate_xcc() drm/amdgpu: Fix vmid_wait fence leak in amdgpu_ring_init() drm/amdkfd: fix use-after-free and multi-container gap in kfd_dev_mapping drm/amdgpu/vcn4.0.3: fix video_timeout unit mismatch in jpeg reset wait drm/amdgpu/vcn5.0.1: fix video_timeout unit mismatch in jpeg reset wait drm/amdgpu/userq: fix double jiffies conversion in hang detect timeout drm/amdgpu: move userq fence wait out of signalling section drm/amd/display: Fix dc stream excess put in dm_update_crtc_state() drm/xe: Add wa_14025941587 to xe2, xe3 and xe3p platforms drm/xe: harden adjust_idledly() against divide-by-zero and overflow drm/xe: Limit sg segment size to PAGE_SIZE on Xen PV drm/i915: fix incorrect RCU teardown order ... |
||
|
Linus Torvalds
|
75467f60a3 |
ipe/stable-7.3 PR 20260925
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQzmBmZPBN6m/hUJmnyomI6a/yO7QUCarbccwAKCRDyomI6a/yO
7YKCAQDsDhTU3Rq7HCUgCkGYpZnsTAqXo3JeDP66Ku6Y0bOJjAEAhyRelXr+tKFW
aYpuOn3qF+tihTJ52RWzAhQzEQ1BRQY=
=QEqL
-----END PGP SIGNATURE-----
Merge tag 'ipe-pr-20260925' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe
Pull IPE fixes from Fan Wu:
"Two fixes for use-after-free issues found by recent LLM-assisted code
analysis.
- move successful policy load auditing under the new policy
directory's inode lock, preventing a concurrent policy deletion
from freeing the policy while it is still being audited
- protect the dm-verity root hash with RCU, preventing policy
evaluation from racing with root hash replacement during preresume"
* tag 'ipe-pr-20260925' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
ipe: protect the dm-verity root hash with RCU
ipe: fix use-after-free when auditing a newly loaded policy
|
||
Dave Airlie
|
a9ed3aa9b8 |
A number of fixes:
- bridge:
- samsung-dsim: fix GPIO lifetime
- client: Null pointer dereference fix
- imagination: error handling fix, page handling fix
- nouveau: fix reference leaks, double-frees, out-of-bounds accesses,
use-after-frees, don't reject config without SCDC, a number of
workarounds
- virtio: fix memory leak, reference leaks, null pointer dereference,
add pixel blend mode, cache coherency fix
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCarU2wwAKCRAnX84Zoj2+
djqrAYCyMUsPcuCxM0A/RWQj9DpZ2W2P6UNoglWsC8QdUtE1MRmx2BbdXFN0OMJn
UiJ33s4BfRLkJWTCBoHbTHl1jjZTQeRY0jIvFYUEIUXeRuXYQg5P8SAktSz6+ZRc
xBaV09iwgA==
=/tKR
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2026-09-24' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A number of fixes:
- bridge:
- samsung-dsim: fix GPIO lifetime
- client: Null pointer dereference fix
- imagination: error handling fix, page handling fix
- nouveau: fix reference leaks, double-frees, out-of-bounds accesses,
use-after-frees, don't reject config without SCDC, a number of
workarounds
- virtio: fix memory leak, reference leaks, null pointer dereference,
add pixel blend mode, cache coherency fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <self@mripard.dev>
Link: https://patch.msgid.link/arU22zzqUGDEco1y@houat
|
||
|
Linus Torvalds
|
049380360c |
SCSI fixes on 20260925
Mostly small driver fixes. The biggest fix is the one to the block zone handling which might trip for real or virtual hardware if the number of zones is > 2^32. Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> -----BEGIN PGP SIGNATURE----- iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCarblBBsUgAAAAAAEAA5t YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy c2hpcC5jb20ACgkQ50LJTO6YrIXG4wEA0mYHxKLKHGzKMTZhLIQc9LqJ+oAFQfwk sUfhX5kqt+QA+QGx/jrg6DKgC6LLeti8xRD+hkeSCwSPCt98Tg2/ba/O =pQUi -----END PGP SIGNATURE----- Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Mostly small driver fixes. The biggest fix is the one to the block zone handling which might trip for real or virtual hardware if the number of zones is > 2^32" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: megaraid_sas: Protect megasas_get_ctrl_info() in megasas_resume() scsi: sd_zbc: Reject disks with too many zones scsi: block: Fix zones_cond out-of-bounds write on zone report scsi: leapraid: Avoid -Wformat-security warning scsi: devinfo: Add BLIST_SKIP_IO_HINTS for EMC Symmetrix scsi: libiscsi_tcp: Check the data direction of a Data-In PDU scsi: ufs: pltfrm: Add quirk for R-Car S4 lacking lanes-per-direction scsi: ufs: core: Keep internal commands dispatchable during error handling |
||
Fan Wu
|
2776e9c285 |
ipe: protect the dm-verity root hash with RCU
ipe_bdev_setintegrity() frees the old root hash when dm-verity publishes
a new one on ->preresume, while policy evaluation can still be
dereferencing it.
Protect the root hash with RCU. The evaluation path already runs under
rcu_read_lock().
Fixes:
|