A previous fix corrected the retry condition for when to continue a
current bundle, but it missed that the current (not the total) transfer
count also applies to the buffer put. If not, then for incrementally
consumed buffer rings repeated completions on the same request may end
up over consuming.
Reported-by: Roy Tang (ErgoniaTrading) <royonia@ergonia.io>
Cc: stable@vger.kernel.org
Fixes: 3a08988123 ("io_uring/net: only retry recv bundle for a full transfer")
Link: https://github.com/axboe/liburing/issues/1423
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 51a4598ad5)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 2c7f023219 upstream.
Currently retry and general validity of msg_inq is gated on it being
larger than zero, but it's entirely possible for this to be slightly
inaccurate. In particular, if FIN is received, it'll return 1.
Just use larger than 1 as the check. This covers both the FIN case, and
at the same time, it doesn't make much sense to retry a recv immediately
if there's even just a single 1 byte of valid data in the socket.
Leave the SOCK_NONEMPTY flagging when larger than 0 still, as an app may
use that for the final receive.
Cc: stable@vger.kernel.org
Reported-by: Christian Mazakas <christian.mazakas@gmail.com>
Fixes: 7c71a0af81 ("io_uring/net: improve recv bundles")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3a08988123 upstream.
If a shorter than assumed transfer was seen, a partial buffer will have
been filled. For that case it isn't sane to attempt to fill more into
the bundle before posting a completion, as that will cause a gap in
the received data.
Check if the iterator has hit zero and only allow to continue a bundle
operation if that is the case.
Also ensure that for putting finished buffers, only the current transfer
is accounted. Otherwise too many buffers may be put for a short transfer.
Link: https://github.com/axboe/liburing/issues/1409
Cc: stable@vger.kernel.org
Fixes: 7c71a0af81 ("io_uring/net: improve recv bundles")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7c71a0af81 upstream.
Current recv bundles are only supported for multishot receives, and
additionally they also always post at least 2 CQEs if more data is
available than what a buffer will hold. This happens because the initial
bundle recv will do a single buffer, and then do the rest of what is in
the socket as a followup receive. As shown in a test program, if 1k
buffers are available and 32k is available to receive in the socket,
you'd get the following completions:
bundle=1, mshot=0
cqe res 1024
cqe res 1024
[...]
cqe res 1024
bundle=1, mshot=1
cqe res 1024
cqe res 31744
where bundle=1 && mshot=0 will post 32 1k completions, and bundle=1 &&
mshot=1 will post a 1k completion and then a 31k completion.
To support bundle recv without multishot, it's possible to simply retry
the recv immediately and post a single completion, rather than split it
into two completions. With the below patch, the same test looks as
follows:
bundle=1, mshot=0
cqe res 32768
bundle=1, mshot=1
cqe res 32768
where mshot=0 works fine for bundles, and both of them post just a
single 32k completion rather than split it into separate completions.
Posting fewer completions is always a nice win, and not needing
multishot for proper bundle efficiency is nice for cases that can't
necessarily use multishot.
Reported-by: Norman Maurer <norman_maurer@apple.com>
Link: https://lore.kernel.org/r/184f9f92-a682-4205-a15d-89e18f664502@kernel.dk
Fixes: 2f9c9515bd ("io_uring/net: support bundles for recv")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3a3c6d6157 upstream.
There is no guaranteed alignment for user pointers, however the
calculation of an offset of the first page into a folio after coalescing
uses some weird bit mask logic, get rid of it.
Cc: stable@vger.kernel.org
Reported-by: David Hildenbrand <david@redhat.com>
Fixes: a8edbb424b ("io_uring/rsrc: enable multi-hugepage buffer coalescing")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/io-uring/e387b4c78b33f231105a601d84eefd8301f57954.1750771718.git.asml.silence@gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e1c75831f6 upstream.
If allocation of the 'imu' fails, then the existing pages aren't
unpinned in the error path. This is mostly a theoretical issue,
requiring fault injection to hit.
Move unpin_user_pages() to unified error handling to fix the page leak
issue.
Fixes: d8c2237d0a ("io_uring: add io_pin_pages() helper")
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Link: https://lore.kernel.org/r/20250617165644.79165-1-superman.xpt@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7d82913d5 upstream.
The hardware only supports L4 checksum offload for TCP/UDP/SCTP protocol.
There was a bug to set Tx checksum flag for the other protocol that results
in Tx ring hang. Fix to compute software checksum for these packets.
Fixes: 3403960cdf ("net: wangxun: libwx add tx offload functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250324103235.823096-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Wenshan Lan <jetlan9@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1e420772c upstream.
The signal delivery logic was modified to always set the PKRU bit in
xregs_state->header->xfeatures by this commit:
ae6012d72f ("x86/pkeys: Ensure updated PKRU value is XRSTOR'd")
However, the change derives the bitmask value using XGETBV(1), rather
than simply updating the buffer that already holds the value. Thus, this
approach induces an unnecessary dependency on XGETBV1 for PKRU handling.
Eliminate the dependency by using the established helper function.
Subsequently, remove the now-unused 'mask' argument.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250416021720.12305-9-chang.seok.bae@intel.com
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64e54461ab upstream.
Currently, saving register states in the signal frame, the legacy feature
bits are always set in xregs_state->header->xfeatures. This code sequence
can be generalized for reuse in similar cases.
Refactor the logic to ensure a consistent approach across similar usages.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-8-chang.seok.bae@intel.com
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a70705d3c0 upstream.
If we fail to commit an entity, we need to restore the
UVC_CTRL_DATA_BACKUP for the other uncommitted entities. Otherwise the
control cache and the device would be out of sync.
Cc: stable@kernel.org
Fixes: b4012002f3 ("[media] uvcvideo: Add support for control events")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://lore.kernel.org/linux-media/fe845e04-9fde-46ee-9763-a6f00867929a@redhat.com/
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Message-ID: <20250224-uvc-data-backup-v2-3-de993ed9823b@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8724a5380c upstream.
[WHAT]
Severe video playback corruption is observed in the following setup:
weston 14.0.90 (built from source) + mpv v0.40.0 with command:
mpv bbb_sunflower_1080p_60fps_normal.mp4 --vo=gpu
[HOW]
ABGR16161616 needs to be included in dml2/2.1 translation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d023de809f)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebe4354270 upstream.
Use the amdgpu fence container so we can store additional
data in the fence. This also fixes the start_time handling
for MCBP since we were casting the fence to an amdgpu_fence
and it wasn't.
Fixes: 3f4c175d62 ("drm/amdgpu: MCBP based on DRM scheduler (v9)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bf1cd14f9e)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f3b16f3f2 upstream.
This commit makes two key fixes to SDMA v4.4.2 handling:
1. disable UTC_L1 in sdma_cntl register when stopping SDMA engines
by reading the current value before modifying UTC_L1_ENABLE bit.
2. Ensure UTC_L1_ENABLE is consistently managed by:
- Adding the missing register write when enabling UTC_L1 during start
- Keeping UTC_L1 enabled by default as per hardware requirements
v2: Correct SDMA_CNTL setting (Philip)
Suggested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 375bf56465)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a39d082c35 upstream.
When the GuC fails to load we declare the device wedged. However, the
very first GuC load attempt on GT0 (from xe_gt_init_hwconfig) is done
before the GT1 GuC objects are initialized, so things go bad when the
wedge code attempts to cleanup GT1. To fix this, check the initialization
status in the functions called during wedge.
Fixes: 7dbe8af13c ("drm/xe: Wedge the entire device")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: stable@vger.kernel.org # v6.12+: 1e1981b16b: drm/xe: Fix taking invalid lock on wedge
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250611214453.1159846-2-daniele.ceraolospurio@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 0b93b7dcd9)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e1981b16b upstream.
If device wedges on e.g. GuC upload, the submission is not yet enabled
and the state is not even initialized. Protect the wedge call so it does
nothing in this case. It fixes the following splat:
[] xe 0000:bf:00.0: [drm] device wedged, needs recovery
[] ------------[ cut here ]------------
[] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[] WARNING: CPU: 48 PID: 312 at kernel/locking/mutex.c:564 __mutex_lock+0x8a1/0xe60
...
[] RIP: 0010:__mutex_lock+0x8a1/0xe60
[] mutex_lock_nested+0x1b/0x30
[] xe_guc_submit_wedge+0x80/0x2b0 [xe]
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20250402-warn-after-wedge-v1-1-93e971511fa5@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87a15c89d8 upstream.
It should rather use xe_map_memset() as the BO is created with
XE_BO_FLAG_VRAM_IF_DGFX in xe_guc_pc_init().
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250612-vmap-vaddr-v1-1-26238ed443eb@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 21cf47d89f)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b669507b63 upstream.
[WHAT]
hws was checked for null earlier in dce110_blank_stream, indicating hws
can be null, and should be checked whenever it is used.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 79db43611f)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e824747cf upstream.
Daniele noticed that the fix in commit 2d2be279f1 ("drm/xe: fix UAF
around queue destruction") looks to have been unintentionally removed as
part of handling a conflict in some past merge commit. Add it back.
Fixes: ac44ff7cec ("Merge tag 'drm-xe-fixes-2024-10-10' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes")
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250603174213.1543579-2-matthew.auld@intel.com
(cherry picked from commit 9d9fca62dc)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ee54d5cac upstream.
Customer is reporting a really subtle issue where we get random DMAR
faults, hangs and other nasties for kernel migration jobs when stressing
stuff like s2idle/s3/s4. The explosions seems to happen somewhere
after resuming the system with splats looking something like:
PM: suspend exit
rfkill: input handler disabled
xe 0000:00:02.0: [drm] GT0: Engine reset: engine_class=bcs, logical_mask: 0x2, guc_id=0
xe 0000:00:02.0: [drm] GT0: Timedout job: seqno=24496, lrc_seqno=24496, guc_id=0, flags=0x13 in no process [-1]
xe 0000:00:02.0: [drm] GT0: Kernel-submitted job timed out
The likely cause appears to be a race between suspend cancelling the
worker that processes the free_job()'s, such that we still have pending
jobs to be freed after the cancel. Following from this, on resume the
pending_list will now contain at least one already complete job, but it
looks like we call drm_sched_resubmit_jobs(), which will then call
run_job() on everything still on the pending_list. But if the job was
already complete, then all the resources tied to the job, like the bb
itself, any memory that is being accessed, the iommu mappings etc. might
be long gone since those are usually tied to the fence signalling.
This scenario can be seen in ftrace when running a slightly modified
xe_pm IGT (kernel was only modified to inject artificial latency into
free_job to make the race easier to hit):
xe_sched_job_run: dev=0000:00:02.0, fence=0xffff888276cc8540, seqno=0, lrc_seqno=0, gt=0, guc_id=0, batch_addr=0x000000146910 ...
xe_exec_queue_stop: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x0, flags=0x13
xe_exec_queue_stop: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=1, guc_state=0x0, flags=0x4
xe_exec_queue_stop: dev=0000:00:02.0, 4:0x1, gt=1, width=1, guc_id=0, guc_state=0x0, flags=0x3
xe_exec_queue_stop: dev=0000:00:02.0, 1:0x1, gt=1, width=1, guc_id=1, guc_state=0x0, flags=0x3
xe_exec_queue_stop: dev=0000:00:02.0, 4:0x1, gt=1, width=1, guc_id=2, guc_state=0x0, flags=0x3
xe_exec_queue_resubmit: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x0, flags=0x13
xe_sched_job_run: dev=0000:00:02.0, fence=0xffff888276cc8540, seqno=0, lrc_seqno=0, gt=0, guc_id=0, batch_addr=0x000000146910 ...
.....
xe_exec_queue_memory_cat_error: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x3, flags=0x13
So the job_run() is clearly triggered twice for the same job, even
though the first must have already signalled to completion during
suspend. We can also see a CAT error after the re-submit.
To prevent this only resubmit jobs on the pending_list that have not yet
signalled.
v2:
- Make sure to re-arm the fence callbacks with sched_start().
v3 (Matt B):
- Stop using drm_sched_resubmit_jobs(), which appears to be deprecated
and just open-code a simple loop such that we skip calling run_job()
on anything already signalled.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4856
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20250528113328.289392-2-matthew.auld@intel.com
(cherry picked from commit 38fafa9f39)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a63e99b4d6 upstream.
In xe_vm_close_and_put() we need to be able to call
flush_work(rebind_work), however during vm creation we can call this on
the error path, before having actually set up the worker, leading to a
splat from flush_work().
It looks like we can simply move the worker init step earlier to fix
this.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250514152424.149591-3-matthew.auld@intel.com
(cherry picked from commit 96af397aa1)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 893f07452b upstream.
[Why]
Only OLED panels require non-zero pre_T11_delay defaultly.
Others should be controlled by power sequence.
[How]
For non OLED, pre_T11_delay delay in code should be zero.
Also post_T7_delay.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d2f6b4e4c upstream.
The drm_mm allocator tolerated being passed end > mm->size, but the
drm_buddy allocator does not.
Restore the pre-buddy-allocator behavior of allowing such placements.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3448
Signed-off-by: John Olender <john.olender@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3e9826a22 upstream.
The function mod_hdcp_hdcp1_enable_encryption() calls the function
get_first_active_display(), but does not check its return value.
The return value is a null pointer if the display list is empty.
This will lead to a null pointer dereference in
mod_hdcp_hdcp2_enable_encryption().
Add a null pointer check for get_first_active_display() and return
MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null.
Fixes: 2deade5ede ("drm/amd/display: Remove hdcp display state with mst fix")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # v5.8
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47c03e6660 upstream.
Once the DSI Link and DSI Phy are initialized, the code needs to wait
for Clk and Data Lanes to be ready, before continuing configuration.
This is in accordance with the DSI Start-up procedure, found in the
Technical Reference Manual of Texas Instrument's J721E SoC[0] which
houses this DSI TX controller.
If the previous bridge (or crtc/encoder) are configured pre-maturely,
the input signal FIFO gets corrupt. This introduces a color-shift on the
display.
Allow the driver to wait for the clk and data lanes to get ready during
DSI enable.
[0]: See section 12.6.5.7.3 "Start-up Procedure" in J721E SoC TRM
TRM Link: http://www.ti.com/lit/pdf/spruil1
Fixes: e19233955d ("drm/bridge: Add Cadence DSI driver")
Cc: stable@vger.kernel.org
Tested-by: Dominik Haller <d.haller@phytec.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-6-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6a7ef0d48 upstream.
Check for the return value of the phy_mipi_dphy_get_default_config()
call, and in case of an error, return back the same.
Fixes: fced5a364d ("drm/bridge: cdns: Convert to phy framework")
Cc: stable@vger.kernel.org
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-5-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 688eb4d465 upstream.
Fix the OF node pointer passed to the of_drm_find_bridge() call to find
the next bridge in the display chain.
The code to find the next panel (and create its panel-bridge) works
fine, but to find the next (non-panel) bridge does not.
To find the next bridge in the pipeline, we need to pass "np" - the OF
node pointer of the next entity in the devicetree chain. Passing
"of_node" to of_drm_find_bridge (which is what the code does currently)
will fetch the bridge for the cdns-dsi which is not what's required.
Fix that.
Fixes: e19233955d ("drm/bridge: Add Cadence DSI driver")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-2-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd2611c13f upstream.
The driver code doesn't have a Phy de-initialization path as yet, and so
it does not clear the phy_initialized flag while suspending. This is a
problem because after resume the driver looks at this flag to determine
if a Phy re-initialization is required or not. It is in fact required
because the hardware is resuming from a suspend, but the driver does not
carry out any re-initialization causing the D-Phy to not work at all.
Call the counterparts of phy_init() and phy_power_on(), that are
phy_exit() and phy_power_off(), from _bridge_post_disable(), and clear
the flags so that the Phy can be initialized again when required.
Fixes: fced5a364d ("drm/bridge: cdns: Convert to phy framework")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-3-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 132bdcec39 upstream.
The crtc_* mode parameters do not get generated (duplicated in this
case) from the regular parameters before the mode validation phase
begins.
The rest of the code conditionally uses the crtc_* parameters only
during the bridge enable phase, but sticks to the regular parameters
for mode validation. In this singular instance, however, the driver
tries to use the crtc_clock parameter even during the mode validation,
causing the validation to fail.
Allow the D-Phy config checks to use mode->clock instead of
mode->crtc_clock during mode_valid checks, like everywhere else in the
driver.
Fixes: fced5a364d ("drm/bridge: cdns: Convert to phy framework")
Cc: stable@vger.kernel.org
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-4-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cfb05257ae upstream.
q->gws is not updated atomically with qpd->mapped_gws_queue. If a
runlist is created between pqm_set_gws and update_queue it will
contain a queue which uses GWS in a process with no GWS allocated.
This will result in a scheduler hang.
Use q->properties.is_gws which is changed while holding the DQM lock.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b98370220e)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b71717735b upstream.
There is a small chance that the GPU is already hot during boot. In that
case, the call to of_devfreq_cooling_register() will immediately try to
apply devfreq cooling, as seen in the following crash:
Unable to handle kernel paging request at virtual address 0000000000014110
pc : a6xx_gpu_busy+0x1c/0x58 [msm]
lr : msm_devfreq_get_dev_status+0xbc/0x140 [msm]
Call trace:
a6xx_gpu_busy+0x1c/0x58 [msm] (P)
devfreq_simple_ondemand_func+0x3c/0x150
devfreq_update_target+0x44/0xd8
qos_max_notifier_call+0x30/0x84
blocking_notifier_call_chain+0x6c/0xa0
pm_qos_update_target+0xd0/0x110
freq_qos_apply+0x3c/0x74
apply_constraint+0x88/0x148
__dev_pm_qos_update_request+0x7c/0xcc
dev_pm_qos_update_request+0x38/0x5c
devfreq_cooling_set_cur_state+0x98/0xf0
__thermal_cdev_update+0x64/0xb4
thermal_cdev_update+0x4c/0x58
step_wise_manage+0x1f0/0x318
__thermal_zone_device_update+0x278/0x424
__thermal_cooling_device_register+0x2bc/0x308
thermal_of_cooling_device_register+0x10/0x1c
of_devfreq_cooling_register_power+0x240/0x2bc
of_devfreq_cooling_register+0x14/0x20
msm_devfreq_init+0xc4/0x1a0 [msm]
msm_gpu_init+0x304/0x574 [msm]
adreno_gpu_init+0x1c4/0x2e0 [msm]
a6xx_gpu_init+0x5c8/0x9c8 [msm]
adreno_bind+0x2a8/0x33c [msm]
...
At this point we haven't initialized the GMU at all yet, so we cannot read
the GMU registers inside a6xx_gpu_busy(). A similar issue was fixed before
in commit 6694482a70 ("drm/msm: Avoid unclocked GMU register access in
6xx gpu_busy"): msm_devfreq_init() does call devfreq_suspend_device(), but
unlike msm_devfreq_suspend(), it doesn't set the df->suspended flag
accordingly. This means the df->suspended flag does not match the actual
devfreq state after initialization and msm_devfreq_get_dev_status() will
end up accessing GMU registers, causing the crash.
Fix this by setting df->suspended correctly during initialization.
Cc: stable@vger.kernel.org
Fixes: 6694482a70 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/650772/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff9cb6d203 upstream.
Disconnecting a DisplayLink device results in the following kernel
error messages
[ 93.041748] [drm:udl_urb_completion [udl]] *ERROR* udl_urb_completion - nonzero write bulk status received: -115
[ 93.055299] [drm:udl_submit_urb [udl]] *ERROR* usb_submit_urb error fffffffe
[ 93.065363] [drm:udl_urb_completion [udl]] *ERROR* udl_urb_completion - nonzero write bulk status received: -115
[ 93.078207] [drm:udl_submit_urb [udl]] *ERROR* usb_submit_urb error fffffffe
coming from KMS poll helpers. Shutting down poll helpers runs them
one final time when the USB device is already gone.
Run drm_dev_unplug() first in udl's USB disconnect handler. Udl's
polling code already handles disconnects gracefully if the device has
been marked as unplugged.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b1a981bd55 ("drm/udl: drop drm_driver.release hook")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303145604.62962-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 780351a5f6 upstream.
In tegra_crtc_reset(), new memory is allocated with kzalloc(), but
no check is performed. Before calling __drm_atomic_helper_crtc_reset,
state should be checked to prevent possible null pointer dereference.
Fixes: b7e0b04ae4 ("drm/tegra: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20241106095906.15247-1-chenqiuji666@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ff4fdf4f4 upstream.
Changes to a plane's type after it has been registered aren't propagated
to userspace automatically. This could possibly be achieved by updating
the property, but since we can already determine which type this should
be before the registration, passing in the right type from the start is
a much better solution.
Suggested-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Fixes: 473079549f ("drm/tegra: dc: Add Tegra186 support")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250421-tegra-drm-primary-v2-1-7f740c4c2121@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61ee19dedb upstream.
Commit 704d3d60fe ("drm/etnaviv: don't block scheduler when GPU is still
active") ensured that active jobs are returned to the pending list when
extending the timeout. However, it didn't use the pending list's lock to
manipulate the list, which causes a race condition as the scheduler's
workqueues are running.
Hold the lock while manipulating the scheduler's pending list to prevent
a race.
Cc: stable@vger.kernel.org
Fixes: 704d3d60fe ("drm/etnaviv: don't block scheduler when GPU is still active")
Reported-by: Philipp Stanner <phasta@kernel.org>
Closes: https://lore.kernel.org/dri-devel/964e59ba1539083ef29b06d3c78f5e2e9b138ab8.camel@mailbox.org/
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250602132240.93314-1-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bfb389a01 upstream.
Do not set CR1B[6] when programming the pitch. The bit effects VGA
text mode and is not interpreted by qemu. [1] It has no affect on
the scanline pitch.
The scanline bit that is set into CR1B[6] belongs into CR13[7], which
the driver sets up correctly.
This bug goes back to the driver's initial commit.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://gitlab.com/qemu-project/qemu/-/blob/stable-9.2/hw/display/cirrus_vga.c?ref_type=heads#L1112 # 1
Fixes: f9aa76a852 ("drm/kms: driver for virtual cirrus under qemu")
Cc: Adam Jackson <ajax@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v3.5+
Link: https://lore.kernel.org/r/20250328091821.195061-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cce65f378 upstream.
The ast driver protects the commit tail against concurrent reads
of the display modes by acquiring a lock. The comment is misleading
as the lock is not released in atomic_flush, but at the end of the
commit-tail helper. Rewrite the comment.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 1fe1821549 ("drm/ast: Acquire I/O-register lock in atomic_commit_tail function")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250324094520.192974-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e083cd802 upstream.
In ufshcd_host_reset_and_restore(), scale up clocks only when clock
scaling is supported. Without this change CPU latency is voted for 0
(ufshcd_pm_qos_update) during resume unconditionally.
Signed-off-by: anvithdosapati <anvithdosapati@google.com>
Link: https://lore.kernel.org/r/20250616085734.2133581-1-anvithdosapati@google.com
Fixes: a3cd5ec55f ("scsi: ufs: add load based scaling of UFS gear")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 752eb816b5 upstream.
On a system with DRAM interleave enabled, out-of-bound access is
detected:
megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask *[1024]'
dump_stack_lvl+0x5d/0x80
ubsan_epilogue+0x5/0x2b
__ubsan_handle_out_of_bounds.cold+0x46/0x4b
megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas]
megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas]
local_pci_probe+0x42/0x90
pci_device_probe+0xdc/0x290
really_probe+0xdb/0x340
__driver_probe_device+0x78/0x110
driver_probe_device+0x1f/0xa0
__driver_attach+0xba/0x1c0
bus_for_each_dev+0x8b/0xe0
bus_add_driver+0x142/0x220
driver_register+0x72/0xd0
megasas_init+0xdf/0xff0 [megaraid_sas]
do_one_initcall+0x57/0x310
do_init_module+0x90/0x250
init_module_from_file+0x85/0xc0
idempotent_init_module+0x114/0x310
__x64_sys_finit_module+0x65/0xc0
do_syscall_64+0x82/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix it accordingly.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Link: https://lore.kernel.org/r/20250604042556.3731059-1-yu.c.chen@intel.com
Fixes: 8049da6f39 ("scsi: megaraid_sas: Use irq_set_affinity_and_hint()")
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85a720f433 upstream.
When sysfs_create_files() fails in wacom_initialize_remotes() the error
is returned and the cleanup action will not have been registered yet.
As a result the kobject???s refcount is never dropped, so the
kobject can never be freed leading to a reference leak.
Fix this by calling kobject_put() before returning.
Fixes: 83e6b40e2d ("HID: wacom: EKR: have the wacom resources dynamically allocated")
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a19ae437c upstream.
When sysfs_create_files() fails during wacom_initialize_remotes() the
fifo buffer is not freed leading to a memory leak.
Fix this by calling kfifo_free() before returning.
Fixes: 83e6b40e2d ("HID: wacom: EKR: have the wacom resources dynamically allocated")
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ae416c5b1 upstream.
During wacom_initialize_remotes() a fifo buffer is allocated
with kfifo_alloc() and later a cleanup action is registered
during devm_add_action_or_reset() to clean it up.
However if the code fails to create a kobject and register it
with sysfs the code simply returns -ENOMEM before the cleanup
action is registered leading to a memory leak.
Fix this by ensuring the fifo is freed when the kobject creation
and registration process fails.
Fixes: 83e6b40e2d ("HID: wacom: EKR: have the wacom resources dynamically allocated")
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9327e3ee5b upstream.
Commit 2f2bd7cbd1 ("hid: lenovo: Resend all settings on reset_resume
for compact keyboards") introduced a regression for ThinkPad TrackPoint
Keyboard II by removing the conditional check for enabling F7/9/11 mode
needed for compact keyboards only. As a result, the non-compact
keyboards can no longer toggle Fn-lock via Fn+Esc, although it can be
controlled via sysfs knob that directly sends raw commands.
This patch restores the previous conditional check without any
additions.
Cc: stable@vger.kernel.org
Fixes: 2f2bd7cbd1 ("hid: lenovo: Resend all settings on reset_resume for compact keyboards")
Signed-off-by: Iusico Maxim <iusico.maxim@libero.it>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba8dac350f upstream.
fstest reports a f2fs bug:
#generic/363 42s ... [failed, exit status 1]- output mismatch (see /share/git/fstests/results//generic/363.out.bad)
# --- tests/generic/363.out 2025-01-12 21:57:40.271440542 +0800
# +++ /share/git/fstests/results//generic/363.out.bad 2025-05-19 19:55:58.000000000 +0800
# @@ -1,2 +1,78 @@
# QA output created by 363
# fsx -q -S 0 -e 1 -N 100000
# +READ BAD DATA: offset = 0xd6fb, size = 0xf044, fname = /mnt/f2fs/junk
# +OFFSET GOOD BAD RANGE
# +0x1540d 0x0000 0x2a25 0x0
# +operation# (mod 256) for the bad data may be 37
# +0x1540e 0x0000 0x2527 0x1
# ...
# (Run 'diff -u /share/git/fstests/tests/generic/363.out /share/git/fstests/results//generic/363.out.bad' to see the entire diff)
Ran: generic/363
Failures: generic/363
Failed 1 of 1 tests
The root cause is user can update post-eof page via mmap [1], however, f2fs
missed to zero post-eof page in below operations, so, once it expands i_size,
then it will include dummy data locates previous post-eof page, so during
below operations, we need to zero post-eof page.
Operations which can include dummy data after previous i_size after expanding
i_size:
- write
- mapwrite [1]
- truncate
- fallocate
* preallocate
* zero_range
* insert_range
* collapse_range
- clone_range (doesn’t support in f2fs)
- copy_range (doesn’t support in f2fs)
[1] https://man7.org/linux/man-pages/man2/mmap.2.html 'BUG section'
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 517f496e1e upstream.
After commit 1aaf8c1229 ("mm: gup: fix infinite loop within
__get_longterm_locked") we are able to longterm pin folios that are not
supposed to get longterm pinned, simply because they temporarily have the
LRU flag cleared (esp. temporarily isolated).
For example, two __get_longterm_locked() callers can race, or
__get_longterm_locked() can race with anything else that temporarily
isolates folios.
The introducing commit mentions the use case of a driver that uses
vm_ops->fault to insert pages allocated through cma_alloc() into the page
tables, assuming they can later get longterm pinned. These pages/ folios
would never have the LRU flag set and consequently cannot get isolated.
There is no known in-tree user making use of that so far, fortunately.
To handle that in the future -- and avoid retrying forever to
isolate/migrate them -- we will need a different mechanism for the CMA
area *owner* to indicate that it actually already allocated the page and
is fine with longterm pinning it. The LRU flag is not suitable for that.
Probably we can lookup the relevant CMA area and query the bitmap; we only
have have to care about some races, probably. If already allocated, we
could just allow longterm pinning)
Anyhow, let's fix the "must not be longterm pinned" problem first by
reverting the original commit.
Link: https://lkml.kernel.org/r/20250611131314.594529-1-david@redhat.com
Fixes: 1aaf8c1229 ("mm: gup: fix infinite loop within __get_longterm_locked")
Signed-off-by: David Hildenbrand <david@redhat.com>
Closes: https://lore.kernel.org/all/20250522092755.GA3277597@tiffany/
Reported-by: Hyesoo Yu <hyesoo.yu@samsung.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Peter Xu <peterx@redhat.com>
Cc: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Cc: Aijun Sun <aijun.sun@unisoc.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fba46a5d83 upstream.
Temporarily clear the preallocation flag when explicitly requesting
allocations. Pre-existing allocations are already counted against the
request through mas_node_count_gfp(), but the allocations will not happen
if the MA_STATE_PREALLOC flag is set. This flag is meant to avoid
re-allocating in bulk allocation mode, and to detect issues with
preallocation calculations.
The MA_STATE_PREALLOC flag should also always be set on zero allocations
so that detection of underflow allocations will print a WARN_ON() during
consumption.
User visible effect of this flaw is a WARN_ON() followed by a null pointer
dereference when subsequent requests for larger number of nodes is
ignored, such as the vma merge retry in mmap_region() caused by drivers
altering the vma flags (which happens in v6.6, at least)
Link: https://lkml.kernel.org/r/20250616184521.3382795-3-Liam.Howlett@oracle.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Reported-by: Hailong Liu <hailong.liu@oppo.com>
Link: https://lore.kernel.org/all/1652f7eb-a51b-4fee-8058-c73af63bacd1@oppo.com/
Link: https://lore.kernel.org/all/20250428184058.1416274-1-Liam.Howlett@oracle.com/
Link: https://lore.kernel.org/all/20250429014754.1479118-1-Liam.Howlett@oracle.com/
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Hailong Liu <hailong.liu@oppo.com>
Cc: zhangpeng.00@bytedance.com <zhangpeng.00@bytedance.com>
Cc: Steve Kang <Steve.Kang@unisoc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85720e04d9 upstream.
'rx_ring->size' means the count of ring descriptors multiplied by the
size of one descriptor. When increasing the count of ring descriptors,
it may exceed the limit of pool size.
[ 864.209610] page_pool_create_percpu() gave up with errno -7
[ 864.209613] txgbe 0000:11:00.0: Page pool creation failed: -7
Fix to set the pool_size to the count of ring descriptors.
Fixes: 850b971110 ("net: libwx: Allocate Rx and Tx resources")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/434C72BFB40E350A+20250625023924.21821-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
