[ Upstream commit 9d8c41816b ]
When using NVME on SG2044, the NVME drvier always complains about "I/O tag
XXX (XXX) QID XX timeout, completion polled", which is caused by the broken
affinity setting mechanism of the sg2042-msi driver.
The PLIC driver can only the set the affinity when enabled, but the
sg2042-msi driver invokes the affinity setter in disabled state, which
causes the change to be lost.
Cure this by implementing the irq_startup()/shutdown() callbacks, which
allow to startup (enabled) the underlying PLIC first.
Fixes: e96b93a97c ("irqchip/sg2042-msi: Add the Sophgo SG2044 MSI interrupt controller")
Reported-by: Han Gao <rabenda.cn@gmail.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/all/20250813232835.43458-4-inochiama@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54f45a30c0 ]
As the RISC-V PLIC cannot apply affinity settings without invoking
irq_enable(), it will make the interrupt unavailble when used as an
underlying interrupt chip for the MSI controller.
Implement the irq_startup() and irq_shutdown() callbacks for the PCI MSI
and MSI-X templates.
For chips that specify MSI_FLAG_PCI_MSI_STARTUP_PARENT, the parent startup
and shutdown functions are invoked. That allows the interrupt on the parent
chip to be enabled if the interrupt has not been enabled during
allocation. This is necessary for MSI controllers which use PLIC as
underlying parent interrupt chip.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250813232835.43458-3-inochiama@gmail.com
Stable-dep-of: 9d8c41816b ("irqchip/sg2042-msi: Fix broken affinity setting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a721a2fee ]
As the MSI controller on SG2044 uses PLIC as the underlying interrupt
controller, it needs to call irq_enable() and irq_disable() to
startup/shutdown interrupts. Otherwise, the MSI interrupt can not be
startup correctly and will not respond any incoming interrupt.
Introduce irq_chip_startup_parent() and irq_chip_shutdown_parent() to allow
the interrupt controller to call the irq_startup()/irq_shutdown() callbacks
of the parent interrupt chip.
In case the irq_startup()/irq_shutdown() callbacks are not implemented for
the parent interrupt chip, this will fallback to irq_chip_enable_parent()
or irq_chip_disable_parent().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/all/20250813232835.43458-2-inochiama@gmail.com
Link: https://lore.kernel.org/lkml/20250722224513.22125-1-inochiama@gmail.com/
Stable-dep-of: 9d8c41816b ("irqchip/sg2042-msi: Fix broken affinity setting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11b3de1c03 ]
The cpuidle device's memory is leaked when cpuidle device registration
fails in acpi_processor_power_init(). Free it as appropriate.
Fixes: 3d339dcbb5 ("cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://patch.msgid.link/20250728070612.1260859-2-lihuisong@huawei.com
[ rjw: Changed the order of the new statements, added empty line after if () ]
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4223bf833c ]
Now BPF program will run with migration disabled, so it is safe
to access this_cpu_inc_return(bpf_bprintf_nest_level).
Fixes: d9c9e4db18 ("bpf: Factorize bpf_trace_printk and bpf_seq_printf")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250819125638.2544715-1-chen.dylane@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fdaf3b183 ]
According to the imx95 RM, the lpuart7 rx and tx DMA's srcid are 88 and 87,
and the lpuart8 rx and tx DMA's srcid are 90 and 89. So correct them.
Fixes: 915fd2e127 ("arm64: dts: imx95: add edma[1..3] nodes")
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c94737568b ]
The assignment of the USB ports is wrong and needs to be swapped.
The OTG (USB-C) port is on the first port and the host port with
the onboard hub is on the second port.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Fixes: 2b52fd6035 ("arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8faa8a466 ]
After commit 20bda12a0e (“firmware: arm_scmi: Make VirtIO transport a
standalone driver”), the VirtIO transport probes independently. During
scmi_virtio_probe, scmi_probe() is called, which intune invokes
scmi_protocol_acquire() that sends a message over the virtqueue and
waits for a reply.
Previously, DRIVER_OK was only set after scmi_vio_probe, in the core
virtio via virtio_dev_probe(). According to the Virtio spec (3.1 Device
Initialization):
| The driver MUST NOT send any buffer available notifications to the
| device before setting DRIVER_OK.
Some type-1 hypervisors block available-buffer notifications until the
driver is marked OK. In such cases, scmi_vio_probe stalls in
scmi_wait_for_reply(), and the probe never completes.
Resolve this by setting DRIVER_OK immediately after the device-specific
setup, so scmi_probe() can safely send notifications.
Note after splitting the transports into modules, the probe sequence
changed a bit. We can no longer rely on virtio_device_ready() being
called by the core in virtio_dev_probe(), because scmi_vio_probe()
doesn’t complete until the core SCMI stack runs scmi_probe(), which
immediately issues the initial BASE protocol exchanges.
Fixes: 20bda12a0e ("firmware: arm_scmi: Make VirtIO transport a standalone driver")
Signed-off-by: Junnan Wu <junnan01.wu@samsung.com>
Message-Id: <20250812075343.3201365-1-junnan01.wu@samsung.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d1e3aa282 ]
The Retronix R-Car V4H Sparrow Hawk EVTB1 uses 1V8 IO voltage supply
for VDDQ18_25_AVB power rail. Update the AVB0 pinmux to reflect the
change in IO voltage. Since the VDDQ18_25_AVB power rail is shared,
all four AVB0, AVB1, AVB2, TSN0 PFC/GPIO POC[7..4] registers have to
be configured the same way. As the EVTA1 boards are from a limited run
and generally not available, update the DT to make it compatible with
EVTB1 IO voltage settings.
Fixes: a719915e76 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250806192821.133302-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae95807b00 ]
Invert the polarity of microSD voltage selector on Retronix R-Car V4H
Sparrow Hawk board. The voltage selector was not populated on prototype
EVTA1 boards, and is implemented slightly different on EVTB1 boards. As
the EVTA1 boards are from a limited run and generally not available,
update the DT to make it compatible with EVTB1 microSD voltage selector.
Fixes: a719915e76 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250727235905.290427-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd5d4621ba ]
Broadcom STB platforms were early adopters (2017) of the SCMI framework and as
a result, not all deployed systems have a Device Tree entry where SCMI
protocol 0x13 (PERFORMANCE) is declared as a clock provider, nor are the
CPU Device Tree node(s) referencing protocol 0x13 as their clock
provider. This was clarified in commit e11c480b6d ("dt-bindings:
firmware: arm,scmi: Extend bindings for protocol@13") in 2023.
For those platforms, we allow the checks done by scmi_dev_used_by_cpus()
to continue, and in the event of not having done an early return, we key
off the documented compatible string and give them a pass to continue to
use scmi-cpufreq.
Fixes: 6c9bb86922 ("cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc3905a71f ]
The tailcall_bpf2bpf_hierarchy_fentry test hangs on s390. Its call
graph is as follows:
entry()
subprog_tail()
trampoline()
fentry()
the rest of subprog_tail() # via BPF_TRAMP_F_CALL_ORIG
return to entry()
The problem is that the rest of subprog_tail() increments the tail call
counter, but the trampoline discards the incremented value. This
results in an astronomically large number of tail calls.
Fix by making the trampoline write the incremented tail call counter
back.
Fixes: 528eb2cb87 ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-4-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c861a6b147 ]
The tailcall_bpf2bpf_hierarchy_1 test hangs on s390. Its call graph is
as follows:
entry()
subprog_tail()
bpf_tail_call_static(0) -> entry + tail_call_start
subprog_tail()
bpf_tail_call_static(0) -> entry + tail_call_start
entry() copies its tail call counter to the subprog_tail()'s frame,
which then increments it. However, the incremented result is discarded,
leading to an astronomically large number of tail calls.
Fix by writing the incremented counter back to the entry()'s frame.
Fixes: dd691e847d ("s390/bpf: Implement bpf_jit_supports_subprog_tailcalls()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-3-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eada40e057 ]
Only BPF functions make use of the tail call counter; helpers and
kfuncs ignore and most likely also clobber it. Writing it into these
functions' frames is pointless and misleading, so do not do it.
Fixes: dd691e847d ("s390/bpf: Implement bpf_jit_supports_subprog_tailcalls()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-2-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5974e8f6c3 ]
There is a register to clamp the flash current per LED channel when
safety timer is disabled. It needs to be updated according to the
maximum torch LED current setting to ensure the torch current won't
be clamped unexpectedly.
Fixes: 96a2e242a5 ("leds: flash: Add driver to support flash LED module in QCOM PMICs")
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250729-fix-torch-clamp-issue-v2-1-9b83816437a3@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e3779e3c6 ]
Coverity noticed that assigning value -EINVAL to 'ret' in the if
statement is useless because 'ret' is overwritten a few lines later.
However, after inspect the code, this warning reveals that we need to
return -EINVAL instead of the variable assignment. So, fix it.
Coverity-id: 1646104
Fixes: aebb5fc9a0 ("leds: max77705: Add LEDs support")
Signed-off-by: Len Bao <len.bao@gmx.us>
Link: https://lore.kernel.org/r/20250727075649.34496-1-len.bao@gmx.us
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1201f6fb5b ]
clock_nanosleep() returns a positive error value. Unlike other libc
functions it *does not* return -1 nor set errno.
Fix the return value and also adapt nanosleep().
Fixes: 7c02bc4088 ("tools/nolibc: add support for clock_nanosleep() and nanosleep()")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250731-nolibc-clock_nanosleep-ret-v1-1-9e4af7855e61@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c6b4146de ]
Previously, re-using pinned DEVMAP maps would always fail, because
get_map_info on a DEVMAP always returns flags with BPF_F_RDONLY_PROG set,
but BPF_F_RDONLY_PROG being set on a map during creation is invalid.
Thus, ignore the BPF_F_RDONLY_PROG flag in the flags returned from
get_map_info when checking for compatibility with an existing DEVMAP.
The same problem is handled in a third-party ebpf library:
- https://github.com/cilium/ebpf/issues/925
- https://github.com/cilium/ebpf/pull/930
Fixes: 0cdbb4b09a ("devmap: Allow map lookups from eBPF")
Signed-off-by: Yureka Lilian <yuka@yuka.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250814180113.1245565-3-yuka@yuka.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abdaf49be5 ]
Graph tracer framework ensures we won't migrate, kprobe_multi_link_prog_run
called all the way from graph tracer, which disables preemption in
function_graph_enter_regs, as Jiri and Yonghong suggested, there is no
need to use migrate_disable. As a result, some overhead may will be reduced.
And add cant_sleep check for __this_cpu_inc_return.
Fixes: 0dcac27254 ("bpf: Add multi kprobe link")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250814121430.2347454-1-chen.dylane@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c80d797206 ]
Based on a bisect, it appears that commit 7ee9887703 ("timers:
Implement the hierarchical pull model") has somehow inadvertently
broken BPF selftest test_tcpnotify_user. The error that is being
generated by this test is as follows:
FAILED: Wrong stats Expected 10 calls, got 8
It looks like the change allows timer functions to be run on CPUs
different from the one they are armed on. The test had pinned itself
to CPU 0, and in the past the retransmit attempts also occurred on CPU
0. The test had set the max_entries attribute for
BPF_MAP_TYPE_PERF_EVENT_ARRAY to 2 and was calling
bpf_perf_event_output() with BPF_F_CURRENT_CPU, so the entry was
likely to be in range. With the change to allow timers to run on other
CPUs, the current CPU tasked with performing the retransmit might be
bumped and in turn fall out of range, as the event will be filtered
out via __bpf_perf_event_output() using:
if (unlikely(index >= array->map.max_entries))
return -E2BIG;
A possible change would be to explicitly set the max_entries attribute
for perf_event_map in test_tcpnotify_kern.c to a value that's at least
as large as the number of CPUs. As it turns out however, if the field
is left unset, then the libbpf will determine the number of CPUs available
on the underlying system and update the max_entries attribute accordingly
in map_set_def_max_entries().
A further problem with the test is that it has a thread that continues
running up until the program exits. The main thread cleans up some
LIBBPF data structures, while the other thread continues to use them,
which inevitably will trigger a SIGSEGV. This can be dealt with by
telling the thread to run for as long as necessary and doing a
pthread_join on it before exiting the program.
Finally, I don't think binding the process to CPU 0 is meaningful for
this test any more, so get rid of that.
Fixes: 435f90a338 ("selftests/bpf: add a test case for sock_ops perf-event notification")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/aJ8kHhwgATmA3rLf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23fca458f6 ]
Unsafe code in CpumaskVar's methods assumes that the type has the same
layout as `bindings::cpumask_var_t`. This is not guaranteed by
the default struct representation in Rust, but requires specifying the
`transparent` representation.
Fixes: 8961b8cb30 ("rust: cpumask: Add initial abstractions")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07866544e4 ]
Commit d6212d82bf ("selftests/bpf: Consolidate kernel modules into
common directory") consolidated the Makefile of test_kmods. However,
since it removed test_kmods from TEST_GEN_PROGS_EXTENDED, the kernel
modules required by bpf selftests are now missing from kselftest_install
when "make install". Fix it by adding test_kmod to TEST_GEN_FILES.
Fixes: d6212d82bf ("selftests/bpf: Consolidate kernel modules into common directory")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250812175039.2323570-1-ameryhung@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c93c59baa5 ]
Yonghong noticed that error messages for potential verifier bugs often
have a '(1)' at the end. This is happening because verifier_bug_if(cond,
env, fmt, args...) prints "(" #cond ")\n" as part of the message and
verifier_bug() is defined as:
#define verifier_bug(env, fmt, args...) verifier_bug_if(1, env, fmt, ##args)
Hence, verifier_bug() always ends up displaying '(1)'. This small patch
fixes it by having verifier_bug_if conditionally call verifier_bug
instead of the other way around.
Fixes: 1cb0f56d96 ("bpf: WARN_ONCE on verifier bugs")
Reported-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/aJo9THBrzo8jFXsh@mail.gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae014fbc99 ]
On RZ/G2LC SMARC EVK, CAN-FD channel0 is not populated, and currently we
are deleting a wrong and nonexistent node. Fixing the wrong node would
invoke a dtb warning message, as channel0 is a required property.
Disable CAN-FD channel0 instead of deleting the node.
Fixes: 46da632734 ("arm64: dts: renesas: rzg2lc-smarc: Enable CANFD channel 1")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250801121959.267424-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8912b2862b ]
rzg3s_oen_read() returns a u32 value, but previously propagated a negative
error code from rzg3s_pin_to_oen_bit(), resulting in an unintended large
positive value due to unsigned conversion. This caused incorrect
output-enable reporting for certain pins.
Without this patch, pins P1_0-P1_4 and P7_0-P7_4 are incorrectly reported
as "output enabled" in the pinconf-pins debugfs file. With this fix, only
P1_0-P1_1 and P7_0-P7_1 are shown as "output enabled", which matches the
hardware manual.
Fix this by returning 0 when the OEN bit lookup fails, treating the pin
as output-disabled by default.
Fixes: a9024a323a ("pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250709160819.306875-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67378b7546 ]
[BUG DURING BS > PS TEST]
When running the following script on a btrfs whose block size is larger
than page size, e.g. 8K block size and 4K page size, it will trigger a
kernel BUG:
# mkfs.btrfs -s 8k $dev
# mount $dev $mnt
# mkdir $mnt/dir
# ln -s dir $mnt/link
# ls $mnt/link
The call trace looks like this:
BTRFS warning (device dm-2): support for block size 8192 with page size 4096 is experimental, some features may be missing
BTRFS info (device dm-2): checking UUID tree
BTRFS info (device dm-2): enabling ssd optimizations
BTRFS info (device dm-2): enabling free space tree
------------[ cut here ]------------
kernel BUG at /home/adam/linux/include/linux/highmem.h:275!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 8 UID: 0 PID: 667 Comm: ls Tainted: G OE 6.17.0-rc4-custom+ #283 PREEMPT(full)
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:zero_user_segments.constprop.0+0xdc/0xe0 [btrfs]
Call Trace:
<TASK>
btrfs_get_extent.cold+0x85/0x101 [btrfs 7453c70c03e631c8d8bfdd4264fa62d3e238da6f]
btrfs_do_readpage+0x244/0x750 [btrfs 7453c70c03e631c8d8bfdd4264fa62d3e238da6f]
btrfs_read_folio+0x9c/0x100 [btrfs 7453c70c03e631c8d8bfdd4264fa62d3e238da6f]
filemap_read_folio+0x37/0xe0
do_read_cache_folio+0x94/0x3e0
__page_get_link.isra.0+0x20/0x90
page_get_link+0x16/0x40
step_into+0x69b/0x830
path_lookupat+0xa7/0x170
filename_lookup+0xf7/0x200
? set_ptes.isra.0+0x36/0x70
vfs_statx+0x7a/0x160
do_statx+0x63/0xa0
__x64_sys_statx+0x90/0xe0
do_syscall_64+0x82/0xae0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Please note bs > ps support is still under development and the
enablement patch is not even in btrfs development branch.
[CAUSE]
Btrfs reuses its data folio read path to handle symbolic links, as the
symbolic link target is stored as an inline data extent.
But for newly created inodes, btrfs only set the minimal order if the
target inode is a regular file.
Thus for above newly created symbolic link, it doesn't properly respect
the minimal folio order, and triggered the above crash.
[FIX]
Call btrfs_set_inode_mapping_order() unconditionally inside
btrfs_create_new_inode().
For symbolic links this will fix the crash as now the folio will meet
the minimal order.
For regular files this brings no change.
For directory/bdev/char and all the other types of inodes, they won't
go through the data read path, thus no effect either.
Fixes: cc38d178ff ("btrfs: enable large data folio support under CONFIG_BTRFS_EXPERIMENTAL")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d83ed6c6c ]
Since the support of bs < ps support, extent_writepage_io() will submit
multiple blocks inside the folio.
But if we hit error submitting one sector, but the next sector can still
be submitted successfully, the function extent_writepage_io() will still
return 0.
This will make btrfs to silently ignore the error without setting error
flag for the filemap.
Fix it by recording the first error hit, and always return that value.
Fixes: 8bf334beb3 ("btrfs: fix double accounting race when extent_writepage_io() failed")
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 216217ebee ]
The 'isolcpus' parameter specified at boot time can be assigned to an
isolated partition. While it is valid put the 'isolcpus' in an isolated
partition, attempting to change a member cpuset to an isolated partition
will fail if the cpuset contains any 'isolcpus'.
For example, the system boots with 'isolcpus=9', and the following
configuration works correctly:
# cd /sys/fs/cgroup/
# mkdir test
# echo 1 > test/cpuset.cpus
# echo isolated > test/cpuset.cpus.partition
# cat test/cpuset.cpus.partition
isolated
# echo 9 > test/cpuset.cpus
# cat test/cpuset.cpus.partition
isolated
# cat test/cpuset.cpus
9
However, the following steps to convert a member cpuset to an isolated
partition will fail:
# cd /sys/fs/cgroup/
# mkdir test
# echo 9 > test/cpuset.cpus
# echo isolated > test/cpuset.cpus.partition
# cat test/cpuset.cpus.partition
isolated invalid (partition config conflicts with housekeeping setup)
The issue occurs because the new partition state (new_prs) is used for
validation against housekeeping constraints before it has been properly
updated. To resolve this, move the assignment of new_prs before the
housekeeping validation check when enabling a root partition.
Fixes: 4a74e41888 ("cgroup/cpuset: Check partition conflict with housekeeping setup")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54d94c422f ]
When CONFIG_SECURITY is not set, CONFIG_LSM (builtin_lsm_order) does
not need to be visible and settable since builtin_lsm_order is defined in
security.o, which is only built when CONFIG_SECURITY=y.
So make CONFIG_LSM depend on CONFIG_SECURITY.
Fixes: 13e735c0e9 ("LSM: Introduce CONFIG_LSM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[PM: subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 661f951e37 ]
Leon [1] and Vinicius [2] noted a topology_span_sane() warning during
their testing starting from v6.16-rc1. Debug that followed pointed to
the tl->mask() for the NODE domain being incorrectly resolved to that of
the highest NUMA domain.
tl->mask() for NODE is set to the sd_numa_mask() which depends on the
global "sched_domains_curr_level" hack. "sched_domains_curr_level" is
set to the "tl->numa_level" during tl traversal in build_sched_domains()
calling sd_init() but was not reset before topology_span_sane().
Since "tl->numa_level" still reflected the old value from
build_sched_domains(), topology_span_sane() for the NODE domain trips
when the span of the last NUMA domain overlaps.
Instead of replicating the "sched_domains_curr_level" hack, get rid of
it entirely and instead, pass the entire "sched_domain_topology_level"
object to tl->cpumask() function to prevent such mishap in the future.
sd_numa_mask() now directly references "tl->numa_level" instead of
relying on the global "sched_domains_curr_level" hack to index into
sched_domains_numa_masks[].
The original warning was reproducible on the following NUMA topology
reported by Leon:
$ sudo numactl -H
available: 5 nodes (0-4)
node 0 cpus: 0 1
node 0 size: 2927 MB
node 0 free: 1603 MB
node 1 cpus: 2 3
node 1 size: 3023 MB
node 1 free: 3008 MB
node 2 cpus: 4 5
node 2 size: 3023 MB
node 2 free: 3007 MB
node 3 cpus: 6 7
node 3 size: 3023 MB
node 3 free: 3002 MB
node 4 cpus: 8 9
node 4 size: 3022 MB
node 4 free: 2718 MB
node distances:
node 0 1 2 3 4
0: 10 39 38 37 36
1: 39 10 38 37 36
2: 38 38 10 37 36
3: 37 37 37 10 36
4: 36 36 36 36 10
The above topology can be mimicked using the following QEMU cmd that was
used to reproduce the warning and test the fix:
sudo qemu-system-x86_64 -enable-kvm -cpu host \
-m 20G -smp cpus=10,sockets=10 -machine q35 \
-object memory-backend-ram,size=4G,id=m0 \
-object memory-backend-ram,size=4G,id=m1 \
-object memory-backend-ram,size=4G,id=m2 \
-object memory-backend-ram,size=4G,id=m3 \
-object memory-backend-ram,size=4G,id=m4 \
-numa node,cpus=0-1,memdev=m0,nodeid=0 \
-numa node,cpus=2-3,memdev=m1,nodeid=1 \
-numa node,cpus=4-5,memdev=m2,nodeid=2 \
-numa node,cpus=6-7,memdev=m3,nodeid=3 \
-numa node,cpus=8-9,memdev=m4,nodeid=4 \
-numa dist,src=0,dst=1,val=39 \
-numa dist,src=0,dst=2,val=38 \
-numa dist,src=0,dst=3,val=37 \
-numa dist,src=0,dst=4,val=36 \
-numa dist,src=1,dst=0,val=39 \
-numa dist,src=1,dst=2,val=38 \
-numa dist,src=1,dst=3,val=37 \
-numa dist,src=1,dst=4,val=36 \
-numa dist,src=2,dst=0,val=38 \
-numa dist,src=2,dst=1,val=38 \
-numa dist,src=2,dst=3,val=37 \
-numa dist,src=2,dst=4,val=36 \
-numa dist,src=3,dst=0,val=37 \
-numa dist,src=3,dst=1,val=37 \
-numa dist,src=3,dst=2,val=37 \
-numa dist,src=3,dst=4,val=36 \
-numa dist,src=4,dst=0,val=36 \
-numa dist,src=4,dst=1,val=36 \
-numa dist,src=4,dst=2,val=36 \
-numa dist,src=4,dst=3,val=36 \
...
[ prateek: Moved common functions to include/linux/sched/topology.h,
reuse the common bits for s390 and ppc, commit message ]
Closes: https://lore.kernel.org/lkml/20250610110701.GA256154@unreal/ [1]
Fixes: ccf74128d6 ("sched/topology: Assert non-NUMA topology masks don't (partially) overlap") # ce29a7da84, f55dac1daf
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Valentin Schneider <vschneid@redhat.com> # x86
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> # powerpc
Link: https://lore.kernel.org/lkml/a3de98387abad28592e6ab591f3ff6107fe01dc1.1755893468.git.tim.c.chen@linux.intel.com/ [2]
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b0dec689a ]
The predicates in test expect event counting from 73e75e6fc3
("cgroup/pids: Separate semantics of pids.events related to pids.max")
and the test would fail on older kernels. We want to have one version of
tests for all, so detect the feature and skip the test on old kernels.
(The test could even switch to check v1 semantics based on the flag but
keep it simple for now.)
Fixes: 9f34c56602 ("selftests: cgroup: Add basic tests for pids controller")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Tested-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac9c408ed1 ]
RDPID instruction outputs to a word-sized register (64-bit on x86_64 and
32-bit on x86_32). Use an unsigned long variable to store the correct size.
LSL outputs to 32-bit register, use %k operand prefix to always print the
32-bit name of the register.
Use RDPID insn mnemonic while at it as the minimum binutils version of
2.30 supports it.
[ bp: Merge two patches touching the same function into a single one. ]
Fixes: ffebbaedc8 ("x86/vdso: Introduce helper functions for CPU and node number")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250616095315.230620-1-ubizjak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43796f3050 ]
When running perf_fuzzer on PTL, sometimes the below "unchecked MSR
access error" is seen when accessing IA32_PMC_x_CFG_B MSRs.
[ 55.611268] unchecked MSR access error: WRMSR to 0x1986 (tried to write 0x0000000200000001) at rIP: 0xffffffffac564b28 (native_write_msr+0x8/0x30)
[ 55.611280] Call Trace:
[ 55.611282] <TASK>
[ 55.611284] ? intel_pmu_config_acr+0x87/0x160
[ 55.611289] intel_pmu_enable_acr+0x6d/0x80
[ 55.611291] intel_pmu_enable_event+0xce/0x460
[ 55.611293] x86_pmu_start+0x78/0xb0
[ 55.611297] x86_pmu_enable+0x218/0x3a0
[ 55.611300] ? x86_pmu_enable+0x121/0x3a0
[ 55.611302] perf_pmu_enable+0x40/0x50
[ 55.611307] ctx_resched+0x19d/0x220
[ 55.611309] __perf_install_in_context+0x284/0x2f0
[ 55.611311] ? __pfx_remote_function+0x10/0x10
[ 55.611314] remote_function+0x52/0x70
[ 55.611317] ? __pfx_remote_function+0x10/0x10
[ 55.611319] generic_exec_single+0x84/0x150
[ 55.611323] smp_call_function_single+0xc5/0x1a0
[ 55.611326] ? __pfx_remote_function+0x10/0x10
[ 55.611329] perf_install_in_context+0xd1/0x1e0
[ 55.611331] ? __pfx___perf_install_in_context+0x10/0x10
[ 55.611333] __do_sys_perf_event_open+0xa76/0x1040
[ 55.611336] __x64_sys_perf_event_open+0x26/0x30
[ 55.611337] x64_sys_call+0x1d8e/0x20c0
[ 55.611339] do_syscall_64+0x4f/0x120
[ 55.611343] entry_SYSCALL_64_after_hwframe+0x76/0x7e
On PTL, GP counter 0 and 1 doesn't support auto counter reload feature,
thus it would trigger a #GP when trying to write 1 on bit 0 of CFG_B MSR
which requires to enable auto counter reload on GP counter 0.
The root cause of causing this issue is the check for auto counter
reload (ACR) counter mask from user space is incorrect in
intel_pmu_acr_late_setup() helper. It leads to an invalid ACR counter
mask from user space could be set into hw.config1 and then written into
CFG_B MSRs and trigger the MSR access warning.
e.g., User may create a perf event with ACR counter mask (config2=0xcb),
and there is only 1 event created, so "cpuc->n_events" is 1.
The correct check condition should be "i + idx >= cpuc->n_events"
instead of "i + idx > cpuc->n_events" (it looks a typo). Otherwise,
the counter mask would traverse twice and an invalid "cpuc->assign[1]"
bit (bit 0) is set into hw.config1 and cause MSR accessing error.
Besides, also check if the ACR counter mask corresponding events are
ACR events. If not, filter out these counter mask. If a event is not a
ACR event, it could be scheduled to an HW counter which doesn't support
ACR. It's invalid to add their counter index in ACR counter mask.
Furthermore, remove the WARN_ON_ONCE() since it's easily triggered as
user could set any invalid ACR counter mask and the warning message
could mislead users.
Fixes: ec980e4fac ("perf/x86/intel: Support auto counter reload")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250820023032.17128-3-dapeng1.mi@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9cf9c6884 ]
After the commit 'd971342d38 ("perf/x86/intel: Decouple BTS
initialization from PEBS initialization")' is introduced, x86_pmu.bts
would initialized in bts_init() which is hooked by arch_initcall().
Whereas init_hw_perf_events() is hooked by early_initcall(). Once the
core PMU is initialized, nmi watchdog initialization is called
immediately before bts_init() is called. It leads to the BTS buffer is
not really initialized since bts_init() is not called and x86_pmu.bts is
still false at that time. Worse, BTS buffer would never be initialized
then unless all core PMU events are freed and reserve_ds_buffers()
is called again.
Thus aligning with init_hw_perf_events(), use early_initcall() to hook
bts_init() to ensure x86_pmu.bts is initialized before nmi watchdog
initialization.
Fixes: d971342d38 ("perf/x86/intel: Decouple BTS initialization from PEBS initialization")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250820023032.17128-2-dapeng1.mi@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e6fe1bbef ]
When loading the i10nm_edac driver on some Intel Granite Rapids servers,
a call trace may appear as follows:
UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c:453:16
shift exponent -66 is negative
...
__ubsan_handle_shift_out_of_bounds+0x1e3/0x390
skx_get_dimm_info.cold+0x47/0xd40 [skx_edac_common]
i10nm_get_dimm_config+0x23e/0x390 [i10nm_edac]
skx_register_mci+0x159/0x220 [skx_edac_common]
i10nm_init+0xcb0/0x1ff0 [i10nm_edac]
...
This occurs because some BIOS may disable a memory controller if there
aren't any memory DIMMs populated on this memory controller. The DIMMMTR
register of this disabled memory controller contains the invalid value
~0, resulting in the call trace above.
Fix this call trace by skipping DIMM enumeration on a disabled memory
controller.
Fixes: ba987eaaab ("EDAC/i10nm: Add Intel Granite Rapids server support")
Reported-by: Jose Jesus Ambriz Meza <jose.jesus.ambriz.meza@intel.com>
Reported-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Closes: https://lore.kernel.org/all/20250730063155.2612379-1-acelan.kao@canonical.com/
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20250806065707.3533345-1-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fad988a215 ]
Already do real negotiation in smb_direct_handle_connect_request()
where we see the requested initiator_depth and responder_resources
from the client.
We should detect legacy iwarp clients using MPA v1
with the custom IRD/ORD negotiation.
We need to send the custom IRD/ORD in big endian,
but we need to try to let clients with broken requests
using little endian (older cifs.ko) to work.
Note the reason why this uses u8 for
initiator_depth and responder_resources is
that the rdma layer also uses it.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: linux-rdma@vger.kernel.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef71f1e046 ]
Do a real negotiation and check the servers initiator_depth and
responder_resources.
This should use big endian in order to be useful.
I have captures of windows clients showing this.
The fact that we used little endian up to now
means that we sent very large numbers and the
negotiation with the server truncated them to the
server limits.
Note the reason why this uses u8 for
initiator_depth and responder_resources is
that the rdma layer also uses it.
The inconsitency regarding the initiator_depth
and responder_resources values being reversed
for iwarp devices in RDMA_CM_EVENT_ESTABLISHED
should also be fixed later, but for now we should
fix it.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: linux-rdma@vger.kernel.org
Fixes: c739858334 ("CIFS: SMBD: Implement RDMA memory registration")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 334c0e493c ]
Since all real encoded extents (directly handled by the decompression
subsystem) have a sane, limited maximum decoded length
(Z_EROFS_PCLUSTER_MAX_DSIZE), and the read-more policy is only applied
if needed.
However, it makes no sense to read more for non-encoded maps, such as
fragment extents, since such extents can be huge (up to i_size) and
there is no benefit to reading more at this layer.
For normal images, it does not really matter, but for crafted images
generated by syzbot, excessively large fragment extents can cause
read-more to run for an overly long time.
Reported-and-tested-by: syzbot+1a9af3ef3c84c5e14dcc@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/68c8583d.050a0220.2ff435.03a3.GAE@google.com
Fixes: b44686c839 ("erofs: fix large fragment handling")
Fixes: b15b2e307c ("erofs: support on-disk compressed fragments data")
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a29fea30dd ]
Cast nr_pages to unsigned long to avoid overflow when handling large
AUX buffer sizes (>= 2 GiB).
Fixes: d5d9696b03 ("drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 105f56877f ]
Cast nr_pages to unsigned long to avoid overflow when handling large
AUX buffer sizes (>= 2 GiB).
Fixes: 3fbf7f011f ("coresight: sink: Add TRBE driver")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8a03516a5 ]
These two C files don't reference things defined in simd.h or types.h
so remove these redundant #inclusions.
Fixes: 6093faaf95 ("raid6: Add RISC-V SIMD syndrome and recovery calculations")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250718072711.3865118-2-zhangchunyan@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba1afc94de ]
uprobe_warn() is passed a task structure, yet its using current. For
the most part this shouldn't matter, but since a task structure is
provided, lets use it.
Fixes: 248d3a7b2f ("uprobes: Change uprobe_copy_process() to dup return_instances")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6b4df37eb ]
CONFIG_PPC_FTRACE_OUT_OF_LINE introduced setup_ftrace_ool_stubs() to
extend the ppc64le module .stubs section with an array of
ftrace_ool_stub structures for each patchable function.
Fix its ppc64_stub_entry stub reservation loop to properly write across
all of the num_stubs used and not just the first entry.
Fixes: eec37961a5 ("powerpc64/ftrace: Move ftrace sequence out of line")
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250912142740.3581368-3-joe.lawrence@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5337609a31 ]
When an ftrace call site is converted to a NOP, its corresponding
dyn_ftrace record should have its ftrace_ops pointer set to
ftrace_nop_ops.
Correct the powerpc implementation to ensure the
ftrace_rec_set_nop_ops() helper is called on all successful NOP
initialization paths. This ensures all ftrace records are consistent
before being handled by the ftrace core.
Fixes: eec37961a5 ("powerpc64/ftrace: Move ftrace sequence out of line")
Suggested-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250912142740.3581368-2-joe.lawrence@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2863371f0 ]
Commit 82ef440f9a ("powerpc/603: Copy kernel PGD entries into all
PGDIRs and preallocate execmem page tables") was supposed to extend
to powerpc 603 the copy of kernel PGD entries into all PGDIRs
implemented in a previous patch on the 8xx. But 603 is book3s/32 and
uses a duplicate of pgd_alloc() defined in another header.
So really do the copy at the correct place for the 603.
Fixes: 82ef440f9a ("powerpc/603: Copy kernel PGD entries into all PGDIRs and preallocate execmem page tables")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/752ab7514cae089a2dd7cc0f3d5e35849f76adb9.1755757797.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9e46de4bf ]
Commit ac9f97ff8b ("powerpc/8xx: Inconditionally use task PGDIR in
DTLB misses") removed the test that needed the valeur in SPRN_EPN but
failed to remove the read.
Remove it.
And remove related comments, including the very same comment
in InstructionTLBMiss that should have been removed by
commit 33c527522f ("powerpc/8xx: Inconditionally use task PGDIR in
ITLB misses").
Also update the comment about absence of a second level table which
has been handled implicitely since commit 5ddb75cee5 ("powerpc/8xx:
remove tests on PGDIR entry validity").
Fixes: ac9f97ff8b ("powerpc/8xx: Inconditionally use task PGDIR in DTLB misses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/5811c8d1d6187f280ad140d6c0ad6010e41eeaeb.1755361995.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
