Most of the callers of wbc_account_cgroup_owner() are converting a folio
to page before calling the function. wbc_account_cgroup_owner() is
converting the page back to a folio to call mem_cgroup_css_from_folio().
Convert wbc_account_cgroup_owner() to take a folio instead of a page,
and convert all callers to pass a folio directly except f2fs.
Convert the page to folio for all the callers from f2fs as they were the
only callers calling wbc_account_cgroup_owner() with a page. As f2fs is
already in the process of converting to folios, these call sites might
also soon be calling wbc_account_cgroup_owner() with a folio directly in
the future.
No functional changes. Only compile tested.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20240926140121.203821-1-kernel@pankajraghav.com
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Because we designed a new version of ES8326, the configuration of
micbias needed to be modified.We tested the new driver,
on both the new version and the old one. It works well.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20241028060529.3359-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The last use of devm_snd_soc_register_dai() was removed by
commit fc4cb1e15f ("ASoC: topology: Properly unregister DAI on removal")
in 2021.
Remove it, and the helper it used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241028021226.477909-1-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If devm_gpiod_get_optional() fails, we need to disable previously enabled
regulators, as done in the other error handling path of the function.
Also, gpiod_set_value_cansleep(, 1) needs to be called to undo a
potential gpiod_set_value_cansleep(, 0).
If the "reset" gpio is not defined, this additional call is just a no-op.
This behavior is the same as the one already in the .remove() function.
Fixes: 11b9cd748e ("ASoC: cs42l51: add reset management")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/a5e5f4b9fb03f46abd2c93ed94b5c395972ce0d1.1729975570.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
I was so sure the per-dentry expire timeout patch worked ok but my
testing was flawed.
In validate_dev_ioctl() the check for ioctl AUTOFS_DEV_IOCTL_TIMEOUT_CMD
should use the ioctl number not the passed in ioctl command.
Fixes: 433f9d76a0 ("autofs: add per dentry expire timeout")
Cc: <stable@vger.kernel.org> # mainline only
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/20241027224732.5507-1-raven@themaw.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
The custom sdhost controller on BCM2835 is feed by the critical VPU clock.
In preparation for PM suspend/resume support, add a proper clock handling
to the driver like in the other clock consumers (e.g. I2C).
Move the clock handling behind mmc_of_parse(), because it could return
with -EPROBE_DEFER and we want to minimize potential clock operation during
boot phase.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Message-ID: <20241025103621.4780-5-wahrenst@gmx.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The type of mmc_ios.clock is unsigned int, so the cached value
should be of the same type.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Message-ID: <20241025103621.4780-4-wahrenst@gmx.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.12-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.13.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When starting the SD Express process, the low power negotiation mode will
be disabled, so we need to re-enable it after switching back to SD mode.
Fixes: 0e92aec2ef ("mmc: sdhci-pci-gli: Add support SD Express card for GL9767")
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Cc: stable@vger.kernel.org
Message-ID: <20241025060017.1663697-2-benchuanggli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On sdhci_gl9767_set_clock(), the vendor header space(VHS) is read-only
after calling gl9767_disable_ssc_pll() and gl9767_set_ssc_pll_205mhz().
So the low power negotiation mode cannot be enabled again.
Introduce gl9767_set_low_power_negotiation() function to fix it.
The explanation process is as below.
static void sdhci_gl9767_set_clock()
{
...
gl9767_vhs_write();
...
value |= PCIE_GLI_9767_CFG_LOW_PWR_OFF;
pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value); <--- (a)
gl9767_disable_ssc_pll(); <--- (b)
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
if (clock == 0)
return; <-- (I)
...
if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
...
gl9767_set_ssc_pll_205mhz(); <--- (c)
}
...
value &= ~PCIE_GLI_9767_CFG_LOW_PWR_OFF;
pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value); <-- (II)
gl9767_vhs_read();
}
(a) disable low power negotiation mode. When return on (I), the low power
mode is disabled. After (b) and (c), VHS is read-only, the low power mode
cannot be enabled on (II).
Reported-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Fixes: d275435551 ("mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL9767")
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Tested-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Message-ID: <20241025060017.1663697-1-benchuanggli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/cpufreq to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20241020153910.324096-2-u.kleine-koenig@baylibre.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When I booted my RK3588 based system I noticed that cpufreq complained
about system clock:
[ +0.007211] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 816000 KHz, changing to: 1008000 KHz
Then I realized that unit is displayed wrong: "KHz" instead of "kHz".
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20240909095529.2325103-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the core_stats rx_dropped counter to avoid the cost of atomic
increments.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running under some other hypervisor, use SBI NACL based HFENCEs
for TLB shoot-down via KVM requests. This makes HFENCEs faster whenever
SBI nested acceleration is available.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-14-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Save trap CSRs in the kvm_riscv_vcpu_enter_exit() function instead of
the kvm_arch_vcpu_ioctl_run() function so that HTVAL and HTINST CSRs
are accessed in more optimized manner while running under some other
hypervisor.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-13-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Implement an optimized KVM world-switch using SBI sync SRET call
when SBI nested acceleration extension is available. This improves
KVM world-switch when KVM RISC-V is running as a Guest under some
other hypervisor.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-12-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
When running under some other hypervisor, prefer nacl_csr_xyz()
for accessing AIA CSRs in the run-loop. This makes CSR access
faster whenever SBI nested acceleration is available.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-11-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
When running under some other hypervisor, prefer nacl_csr_xyz()
for accessing H-extension CSRs in the run-loop. This makes CSR
access faster whenever SBI nested acceleration is available.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-10-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Add a common nested acceleration support which will be shared by
all parts of KVM RISC-V. This nested acceleration support detects
and enables SBI NACL extension usage based on static keys which
ensures minimum impact on the non-nested scenario.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-9-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Add defines for the new SBI nested acceleration extension which was
ratified as part of the SBI v2.0 specification.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-8-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
No need to setup SGEI local interrupt when there are zero guest
external interrupts (i.e. zero HW IMSIC guest files).
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-7-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The aia_set_hvictl() internally writes the HVICTL CSR which makes
it difficult to optimize the CSR write using SBI NACL extension for
kvm_riscv_vcpu_aia_update_hvip() function so replace aia_set_hvictl()
with new aia_hvictl_value() which only computes the HVICTL value.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-6-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Break down the __kvm_riscv_switch_to() function into macros so that
these macros can be later re-used by SBI NACL extension based low-level
switch function.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-5-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The SCOUNTEREN CSR need not be saved/restored in the low-level
__kvm_riscv_switch_to() function hence move the SCOUNTEREN CSR
save/restore to the kvm_riscv_vcpu_swap_in_guest_state() and
kvm_riscv_vcpu_swap_in_host_state() functions in C sources.
Also, re-arrange the CSR save/restore and related GPR usage in
the low-level __kvm_riscv_switch_to() low-level function.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-4-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
We will be optimizing HSTATUS CSR access via shared memory setup
using the SBI nested acceleration extension. To facilitate this,
we first move HSTATUS save/restore in kvm_riscv_vcpu_enter_exit().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-3-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Order the object files alphabetically in the Makefile so that
it is very predictable inserting new object files in the future.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241020194734.58686-2-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
For the information collected on the host side, we need to
identify which data originates from the guest and record
these events separately, this can be achieved by having
KVM register perf callbacks.
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/00342d535311eb0629b9ba4f1e457a48e2abee33.1728957131.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
pcim_iomap_regions() and pcim_iomap_table() have been deprecated in
commit e354bb84a4 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()").
Replace these functions with pcim_iomap_region().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://lore.kernel.org/r/20241028094440.19115-3-pstanner@redhat.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The explicit crypto_engine_stop() call is not needed, as it is already
called internally by crypto_engine_exit().
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The explicit crypto_engine_stop() call is not needed, as it is already
called internally by crypto_engine_exit().
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move crypto_simd_disabled_for_test to lib/ so that crypto_simd_usable()
can be used by library code.
This was discussed previously
(https://lore.kernel.org/linux-crypto/20220716062920.210381-4-ebiggers@kernel.org/)
but was not done because there was no use case yet. However, this is
now needed for the arm64 CRC32 library code.
Tested with:
export ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
echo CONFIG_CRC32=y > .config
echo CONFIG_MODULES=y >> .config
echo CONFIG_CRYPTO=m >> .config
echo CONFIG_DEBUG_KERNEL=y >> .config
echo CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=n >> .config
echo CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y >> .config
make olddefconfig
make -j$(nproc)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The while loop breaks in the first run because of incorrect
if condition. It also causes the statements after the if to
appear dead.
Fix this by changing the condition from if(timeout--) to
if(!timeout--).
This bug was reported by Coverity Scan.
Report:
CID 1600859: (#1 of 1): Logically dead code (DEADCODE)
dead_error_line: Execution cannot reach this statement: udelay(30UL);
Fixes: 9e2c7d9994 ("crypto: cavium - Add Support for Octeon-tx CPT Engine")
Signed-off-by: Everest K.C. <everestkc@everestkc.com.np>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document the crypto engine on the SA8775P Platform.
Signed-off-by: Yuvaraj Ranganathan <quic_yrangana@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for Airoha TRNG. The Airoha SoC provide a True RNG module
that can output 4 bytes of raw data at times.
The module makes use of various noise source to provide True Random
Number Generation.
On probe the module is reset to operate Health Test and verify correct
execution of it.
The module can also provide DRBG function but the execution mode is
mutually exclusive, running as TRNG doesn't permit to also run it as
DRBG.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for Airoha EN7581 True Random Number generator.
This module can generate up to 4bytes of raw data at times and support
self health test at startup. The module gets noise for randomness from
various source from ADC, AP, dedicated clocks and other devices attached
to the SoC producing true random numbers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake of 'accelaration' in comments which
should be 'acceleration'.
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove returns that are immediately followed by another return.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stop using FRAME_BEGIN and FRAME_END in the AEGIS assembly functions,
since all these functions are now leaf functions. This eliminates some
unnecessary instructions.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update a caller of aegis128_aesni_ad() to round down the length to a
block boundary. After that, aegis128_aesni_ad(), aegis128_aesni_enc(),
and aegis128_aesni_dec() are only passed whole blocks. Update the
assembly code to take advantage of that, which eliminates some unneeded
instructions. For aegis128_aesni_enc() and aegis128_aesni_dec(), the
length is also always nonzero, so stop checking for zero length.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Optimize the code that loads and stores partial blocks, taking advantage
of SSE4.1. The code is adapted from that in aes-gcm-aesni-x86_64.S.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adjust the prototypes of the AEGIS assembly functions:
- Use proper types instead of 'void *', when applicable.
- Move the length parameter to after the buffers it describes rather
than before, to match the usual convention. Also shorten its name to
just len (which is the name used in the assembly code).
- Declare register aliases at the beginning of each function rather than
once per file. This was necessary because len was moved, but also it
allows adding some aliases where raw registers were used before.
- Put assoclen and cryptlen in the correct order when declaring the
finalization function in the .c file.
- Remove the unnecessary "crypto_" prefix.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Start using SSE4.1 instructions in the AES-NI AEGIS code, with the first
use case being preparing the length block in fewer instructions.
In practice this does not reduce the set of CPUs on which the code can
run, because all Intel and AMD CPUs with AES-NI also have SSE4.1.
Upgrade the existing SSE2 feature check to SSE4.1, though it seems this
check is not strictly necessary; the aesni-intel module has been getting
away with using SSE4.1 despite checking for AES-NI only.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the AEGIS assembly code paths that were "optimized" to operate on
16-byte aligned data using movdqa, and instead just use the code paths
that use movdqu and can handle data with any alignment.
This does not reduce performance. movdqa is basically a historical
artifact; on aligned data, movdqu and movdqa have had the same
performance since Intel Nehalem (2008) and AMD Bulldozer (2011). And
code that requires AES-NI cannot run on CPUs older than those anyway.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of using a struct of function pointers to decide whether to call
the encryption or decryption assembly functions, use a conditional
branch on a bool. Force-inline the functions to avoid actually
generating the branch. This improves performance slightly since
indirect calls are slow. Remove the now-unnecessary CFI stubs.
Note that just force-inlining the existing functions might cause the
compiler to optimize out the indirect branches, but that would not be a
reliable way to do it and the CFI stubs would still be required.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Don't bother providing empty stubs for the init and exit methods in
struct aead_alg, since they are optional anyway.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the AEGIS assembly code to access 'unsigned int' arguments as 32-bit
values instead of 64-bit, since the upper bits of the corresponding
64-bit registers are not guaranteed to be zero.
Note: there haven't been any reports of this bug actually causing
incorrect behavior. Neither gcc nor clang guarantee zero-extension to
64 bits, but zero-extension is likely to happen in practice because most
instructions that operate on 32-bit registers zero-extend to 64 bits.
Fixes: 1d373d4e8e ("crypto: x86 - Add optimized AEGIS implementations")
Cc: stable@vger.kernel.org
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crc32c-generic is currently backed by the architecture's CRC-32c library
code, which may offer a variety of implementations depending on the
capabilities of the platform. These are not covered by the crypto
subsystem's fuzz testing capabilities because crc32c-generic is the
reference driver that the fuzzing logic uses as a source of truth.
Fix this by providing a crc32c-arch implementation which is based on the
arch library code if available, and modify crc32c-generic so it is
always based on the generic C implementation. If the arch has no CRC-32c
library code, this change does nothing.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crc32-generic is currently backed by the architecture's CRC-32 library
code, which may offer a variety of implementations depending on the
capabilities of the platform. These are not covered by the crypto
subsystem's fuzz testing capabilities because crc32-generic is the
reference driver that the fuzzing logic uses as a source of truth.
Fix this by providing a crc32-arch implementation which is based on the
arch library code if available, and modify crc32-generic so it is
always based on the generic C implementation. If the arch has no CRC-32
library code, this change does nothing.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
