[ Upstream commit c567bc5fc6 ]
The AXI crossbar of TH1520 has no proper timeout handling, which means
gating AXI clocks can easily lead to bus timeout and thus system hang.
Set all AXI clock gates to CLK_IS_CRITICAL. All these clock gates are
ungated by default on system reset.
In addition, convert all current CLK_IGNORE_UNUSED usage to
CLK_IS_CRITICAL to prevent unwanted clock gating.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f7b168323 ]
Rework nss_port5 to use the new multiple configuration implementation
and correctly fix the clocks for this port under some corner case.
In OpenWrt, this patch avoids intermittent dmesg errors of the form
nss_port5_rx_clk_src: rcg didn't update its configuration.
This is a mechanical, straightforward port of
commit e88f03230d
("clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf")
to gcc-ipq6018, with two conflicts resolved: different frequency of the
P_XO clock source, and only 5 Ethernet ports.
This was originally developed by JiaY-shi <shi05275@163.com>.
Link: https://lore.kernel.org/all/20231220221724.3822-4-ansuelsmth@gmail.com/
Signed-off-by: Marko Mäkelä <marko.makela@iki.fi>
Tested-by: Marko Mäkelä <marko.makela@iki.fi>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250802095546.295448-1-marko.makela@iki.fi
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b1a4a59a2 ]
In btrfs_fallocate(), when the allocated range overlaps with a prealloc
extent and the extent starts after i_size, the range doesn't get marked
dirty in file_extent_tree. This results in persisting an incorrect
disk_i_size for the inode when not using the no-holes feature.
This is reproducible since commit 41a2ee75aa ("btrfs: introduce
per-inode file extent tree"), then became hidden since commit 3d7db6e8bd
("btrfs: don't allocate file extent tree for non regular files") and then
visible again after commit 8679d2687c ("btrfs: initialize
inode::file_extent_tree after i_mode has been set"), which fixes the
previous commit.
The following reproducer triggers the problem:
$ cat test.sh
MNT=/mnt/test
DEV=/dev/vdb
mkdir -p $MNT
mkfs.btrfs -f -O ^no-holes $DEV
mount $DEV $MNT
touch $MNT/file1
fallocate -n -o 1M -l 2M $MNT/file1
umount $MNT
mount $DEV $MNT
len=$((1 * 1024 * 1024))
fallocate -o 1M -l $len $MNT/file1
du --bytes $MNT/file1
umount $MNT
mount $DEV $MNT
du --bytes $MNT/file1
umount $MNT
Running the reproducer gives the following result:
$ ./test.sh
(...)
2097152 /mnt/test/file1
1048576 /mnt/test/file1
The difference is exactly 1048576 as we assigned.
Fix by adding a call to btrfs_inode_set_file_extent_range() in
btrfs_fallocate_update_isize().
Fixes: 41a2ee75aa ("btrfs: introduce per-inode file extent tree")
Signed-off-by: austinchang <austinchang@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f260c6aff0 ]
When btrfs_add_qgroup_relation() is called with invalid qgroup levels
(src >= dst), the function returns -EINVAL directly without freeing the
preallocated qgroup_list structure passed by the caller. This causes a
memory leak because the caller unconditionally sets the pointer to NULL
after the call, preventing any cleanup.
The issue occurs because the level validation check happens before the
mutex is acquired and before any error handling path that would free
the prealloc pointer. On this early return, the cleanup code at the
'out' label (which includes kfree(prealloc)) is never reached.
In btrfs_ioctl_qgroup_assign(), the code pattern is:
prealloc = kzalloc(sizeof(*prealloc), GFP_KERNEL);
ret = btrfs_add_qgroup_relation(trans, sa->src, sa->dst, prealloc);
prealloc = NULL; // Always set to NULL regardless of return value
...
kfree(prealloc); // This becomes kfree(NULL), does nothing
When the level check fails, 'prealloc' is never freed by either the
callee or the caller, resulting in a 64-byte memory leak per failed
operation. This can be triggered repeatedly by an unprivileged user
with access to a writable btrfs mount, potentially exhausting kernel
memory.
Fix this by freeing prealloc before the early return, ensuring prealloc
is always freed on all error paths.
Fixes: 4addc1ffd6 ("btrfs: qgroup: preallocate memory before adding a relation")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Shardul Bankar <shardulsb08@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe9622011f ]
When QP wraps around, WQE data from the previous use at the same
position still remains as driver does not clear it. The WQE field
layout differs across different opcodes, causing that the fields
that are not explicitly assigned for the current opcode retain
stale values, and are issued to HW by mistake. Such fields are as
follows:
* MSG_START_SGE_IDX field in ATOMIC WQE
* BLOCK_SIZE and ZBVA fields in FRMR WQE
* DirectWQE fields when DirectWQE not used
For ATOMIC WQE, always set the latest sge index in MSG_START_SGE_IDX
as required by HW.
For FRMR WQE and DirectWQE, clear only those unassigned fields
instead of the entire WQE to avoid performance penalty.
Fixes: 68a997c5d2 ("RDMA/hns: Add FRMR support for hip08")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251016114051.1963197-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5a7cbea54 ]
The actual sge number may exceed the value specified in init_attr->cap
when HW needs extra sge to enable inline feature. Since these extra
sges are not expected by ULP, return the user-specified value to ULP
instead of the expanded sge number.
Fixes: 0c5e259b06 ("RDMA/hns: Fix incorrect sge nums calculation")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251016114051.1963197-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4b67b514a ]
Currently driver enforces affinity between QP cache and send CQ
cache, which helps improve the performance of sending, but doesn't
set affinity with recv CQ cache, resulting in suboptimal performance
of receiving.
Use one CQ bank per context to ensure the affinity among QP, send CQ
and recv CQ. For kernel ULP, CQ bank is fixed to 0.
Fixes: 9e03dbea2b ("RDMA/hns: Fix CQ and QP cache affinity")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251016114051.1963197-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8713158fa ]
In `UVERBS_METHOD_CQ_CREATE`, umem should be released if anything goes
wrong. Currently, if `create_cq_umem` fails, umem would not be
released or referenced, causing a possible leak.
In this patch, we release umem at `UVERBS_METHOD_CQ_CREATE`, the driver
should not release umem if it returns an error code.
Fixes: 1a40c362ae ("RDMA/uverbs: Add a common way to create CQ with umem")
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Link: https://patch.msgid.link/aOh1le4YqtYwj-hH@osx.local
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5575b7646b ]
The driver maintains a CQ table that is used to ensure that a CQ is
still valid when processing CQ related AEs. When a CQ is destroyed,
the table entry is cleared, using irdma_cq.cq_num as the index. This
field was never being set, so it was just always clearing out entry
0.
Additionally, the cq_num field size was increased to accommodate HW
supporting more than 64K CQs.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20250923142439.943930-1-jmoroni@google.com
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 880245fd02 ]
These fields were set but not used anywhere, so remove them.
Link: https://patch.msgid.link/r/20250923142128.943240-1-jmoroni@google.com
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: 5575b7646b ("RDMA/irdma: Set irdma_cq cq_num field during CQ create")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d158f47f1 ]
In some cases, it is possible for pble_rsrc->next_fpm_addr to be
larger than u32, so remove the u32 cast to avoid unintentional
truncation.
This fixes the following error that can be observed when registering
massive memory regions:
[ 447.227494] (NULL ib_device): cqp opcode = 0x1f maj_err_code = 0xffff min_err_code = 0x800c
[ 447.227505] (NULL ib_device): [Update PE SDs Cmd Error][op_code=21] status=-5 waiting=1 completion_err=1 maj=0xffff min=0x800c
Fixes: e8c4dbc2fc ("RDMA/irdma: Add PBLE resource manager")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20250923190850.1022773-1-jmoroni@google.com
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88de89f184 ]
The current error handling path in bnxt_re_destroy_gsi_sqp() could lead
to a resource leak. When bnxt_qplib_destroy_qp() fails, the function
jumps to the 'fail' label and returns immediately, skipping the call
to bnxt_qplib_free_qp_res().
Continue the resource teardown even if bnxt_qplib_destroy_qp() fails,
which aligns with the driver's general error handling strategy and
prevents the potential leak.
Fixes: 8dae419f9e ("RDMA/bnxt_re: Refactor queue pair creation code")
Signed-off-by: YanLong Dai <daiyanlong@kylinos.cn>
Link: https://patch.msgid.link/20250924061444.11288-1-daiyanlong@kylinos.cn
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 761dc71c60 ]
All the 3 major C compilers (MSVC, GCC, LLVM/Clang) warn about
the unused variable i after the removal of its usage by PR #1031
addressing Issue #1027
Link: 6d235320
Signed-off-by: Saket Dumbre <saket.dumbre@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db291ed173 ]
[Why]
DP validation may fail with multiple displays and higher color depths.
The sink may support others though.
[How]
When DP bandwidth validation fails, progressively fallback through:
- YUV422 8bpc (bandwidth efficient)
- YUV422 6bpc (reduced color depth)
- YUV420 (last resort)
This resolves cases where displays would show no image due to insufficient
DP link bandwidth for the requested RGB mode.
Suggested-by: Mauri Carvalho <mcarvalho3@lenovo.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8607edcd17 ]
A recent change to hide USB3 root hubs of USB2-only controllers broke
registration of USB2 root hubs - allow_single_roothub is set too late,
and by this time xhci_run() has already deferred root hub registration
until after the shared HCD is added, which will never happen.
This makes such controllers unusable, but testers didn't notice since
they were only bothered by warnings about empty USB3 root hubs. The bug
causes problems to other people who actually use such HCs and I was
able to confirm it on an ordinary HC by patching to ignore USB3 ports.
Setting allow_single_roothub during early setup fixes things.
Reported-by: Arisa Snowbell <arisa.snowbell@gmail.com>
Closes: https://lore.kernel.org/linux-usb/CABpa4MA9unucCoKtSdzJyOLjHNVy+Cwgz5AnAxPkKw6vuox1Nw@mail.gmail.com/
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/linux-usb/lnb5bum7dnzkn3fc7gq6hwigslebo7o4ccflcvsc3lvdgnu7el@fvqpobbdoapl/
Fixes: 719de070f7 ("usb: xhci-pci: add support for hosts with zero USB3 ports")
Tested-by: Arisa Snowbell <arisa.snowbell@gmail.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b4cbcf6b ]
Currently when both IMA and EVM are in fix mode, the IMA signature will
be reset to IMA hash if a program first stores IMA signature in
security.ima and then writes/removes some other security xattr for the
file.
For example, on Fedora, after booting the kernel with "ima_appraise=fix
evm=fix ima_policy=appraise_tcb" and installing rpm-plugin-ima,
installing/reinstalling a package will not make good reference IMA
signature generated. Instead IMA hash is generated,
# getfattr -m - -d -e hex /usr/bin/bash
# file: usr/bin/bash
security.ima=0x0404...
This happens because when setting security.selinux, the IMA_DIGSIG flag
that had been set early was cleared. As a result, IMA hash is generated
when the file is closed.
Similarly, IMA signature can be cleared on file close after removing
security xattr like security.evm or setting/removing ACL.
Prevent replacing the IMA file signature with a file hash, by preventing
the IMA_DIGSIG flag from being reset.
Here's a minimal C reproducer which sets security.selinux as the last
step which can also replaced by removing security.evm or setting ACL,
#include <stdio.h>
#include <sys/xattr.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <stdlib.h>
int main() {
const char* file_path = "/usr/sbin/test_binary";
const char* hex_string = "030204d33204490066306402304";
int length = strlen(hex_string);
char* ima_attr_value;
int fd;
fd = open(file_path, O_WRONLY|O_CREAT|O_EXCL, 0644);
if (fd == -1) {
perror("Error opening file");
return 1;
}
ima_attr_value = (char*)malloc(length / 2 );
for (int i = 0, j = 0; i < length; i += 2, j++) {
sscanf(hex_string + i, "%2hhx", &ima_attr_value[j]);
}
if (fsetxattr(fd, "security.ima", ima_attr_value, length/2, 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
const char* selinux_value= "system_u:object_r:bin_t:s0";
if (fsetxattr(fd, "security.selinux", selinux_value, strlen(selinux_value), 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
close(fd);
return 0;
}
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00be6f26a2 ]
When io_uring is used in the same task as CIFS, there might be
unnecessary reconnects, causing issues in user-space applications
like QEMU with a log like:
> CIFS: VFS: \\10.10.100.81 Error -512 sending data on socket to server
Certain io_uring completions might be added to task_work with
notify_method being TWA_SIGNAL and thus TIF_NOTIFY_SIGNAL is set for
the task.
In __smb_send_rqst(), signals are masked before calling
smb_send_kvec(), but the masking does not apply to TIF_NOTIFY_SIGNAL.
If sk_stream_wait_memory() is reached via sock_sendmsg() while
TIF_NOTIFY_SIGNAL is set, signal_pending(current) will evaluate to
true there, and -EINTR will be propagated all the way from
sk_stream_wait_memory() to sock_sendmsg() in smb_send_kvec().
Afterwards, __smb_send_rqst() will see that not everything was written
and reconnect.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5676398315 ]
open_cached_dir_by_dentry() was missing an update of
cfid->last_access_time to jiffies, similar to what open_cached_dir()
has.
Add it to the function.
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3677ca67b9 ]
we should use sock_create_kern() if the socket resides in kernel space.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06fdc45f16 ]
When a PF enters switchdev mode, its netdevice becomes the uplink
representor but remains in its current network namespace. All other
representors (VFs, SFs) are created in the netns of the devlink
instance.
If the PF's netns has been moved and differs from the devlink's netns,
enabling switchdev mode would create a state where the OVS control
plane (ovs-vsctl) cannot manage the switch because the PF uplink
representor and the other representors are split across different
namespaces.
To prevent this inconsistent configuration, block the request to enter
switchdev mode if the PF netdevice's netns does not match the netns of
its devlink instance.
As part of this change, the PF's netns is first marked as immutable.
This prevents race conditions where the netns could be changed after
the check is performed but before the mode transition is complete, and
it aligns the PF's behavior with that of the final uplink representor.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1759094723-843774-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4099b98203 ]
A soft lockup was observed when loading amdgpu module.
If a module has a lot of tracable functions, multiple calls
to kallsyms_lookup can spend too much time in RCU critical
section and with disabled preemption, causing kernel panic.
This is the same issue that was fixed in
commit d0b24b4e91 ("ftrace: Prevent RCU stall on PREEMPT_VOLUNTARY
kernels") and commit 42ea22e754 ("ftrace: Add cond_resched() to
ftrace_graph_set_hash()").
Fix it the same way by adding cond_resched() in ftrace_module_enable.
Link: https://lore.kernel.org/aMQD9_lxYmphT-up@vova-pc
Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 025e880759 ]
Willy Tarreau <w@1wt.eu> forwarded me a message from
Disclosure <disclosure@aisle.com> with the following
warning:
> The helper `xattr_key()` uses the pointer variable in the loop condition
> rather than dereferencing it. As `key` is incremented, it remains non-NULL
> (until it runs into unmapped memory), so the loop does not terminate on
> valid C strings and will walk memory indefinitely, consuming CPU or hanging
> the thread.
I easily reproduced this with setfattr and getfattr, causing a kernel
oops, hung user processes and corrupted orangefs files. Disclosure
sent along a diff (not a patch) with a suggested fix, which I based
this patch on.
After xattr_key started working right, xfstest generic/069 exposed an
xattr related memory leak that lead to OOM. xattr_key returns
a hashed key. When adding xattrs to the orangefs xattr cache, orangefs
used hash_add, a kernel hashing macro. hash_add also hashes the key using
hash_log which resulted in additions to the xattr cache going to the wrong
hash bucket. generic/069 tortures a single file and orangefs does a
getattr for the xattr "security.capability" every time. Orangefs
negative caches on xattrs which includes a kmalloc. Since adds to the
xattr cache were going to the wrong bucket, every getattr for
"security.capability" resulted in another kmalloc, none of which were
ever freed.
I changed the two uses of hash_add to hlist_add_head instead
and the memory leak ceased and generic/069 quit throwing furniture.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Reported-by: Stanislav Fort of Aisle Research <stanislav.fort@aisle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1b501a8c6 ]
page_pool_init() returns E2BIG when the page_pool size goes above 32K
pages. As some drivers are configuring the page_pool size according to
the MTU and ring size, there are cases where this limit is exceeded and
the queue creation fails.
The page_pool size doesn't have to cover a full queue, especially for
larger ring size. So clamp the size instead of returning an error. Do
this in the core to avoid having each driver do the clamping.
The current limit was deemed to high [1] so it was reduced to 16K to avoid
page waste.
[1] https://lore.kernel.org/all/1758532715-820422-3-git-send-email-tariqt@nvidia.com/
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250926131605.2276734-2-dtatulea@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38b04ed707 ]
The TTY layer already serializes line discipline operations with
tty->ldisc_sem, so the extra disc_data_lock and refcnt in 6pack
are unnecessary.
Removing them simplifies the code and also resolves a lockdep warning
reported by syzbot. The warning did not indicate a real deadlock, since
the write-side lock was only taken in process context with hardirqs
disabled.
Reported-by: syzbot+5fd749c74105b0e1b302@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68c858b0.050a0220.3c6139.0d1c.GAE@google.com/
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20250925051059.26876-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79c1587b6c ]
syzbot created an exfat image with cluster bits not set for the allocation
bitmap. exfat-fs reads and uses the allocation bitmap without checking
this. The problem is that if the start cluster of the allocation bitmap
is 6, cluster 6 can be allocated when creating a directory with mkdir.
exfat zeros out this cluster in exfat_mkdir, which can delete existing
entries. This can reallocate the allocated entries. In addition,
the allocation bitmap is also zeroed out, so cluster 6 can be reallocated.
This patch adds exfat_test_bitmap_range to validate that clusters used for
the allocation bitmap are correctly marked as in-use.
Reported-by: syzbot+a725ab460fc1def9896f@syzkaller.appspotmail.com
Tested-by: syzbot+a725ab460fc1def9896f@syzkaller.appspotmail.com
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dfba10838 ]
For exFAT filesystems with 4MB read_ahead_size, removing the storage device
when the read operation is in progress, which cause the last read syscall
spent 150s [1]. The main reason is that exFAT generates excessive log
messages [2].
After applying this patch, approximately 300,000 lines of log messages
were suppressed, and the delay of the last read() syscall was reduced
to about 4 seconds.
[1]:
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000120>
read(4, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000032>
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000119>
read(4, 0x7fccf28ae000, 131072) = -1 EIO (Input/output error) <150.186215>
[2]:
[ 333.696603] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
[ 333.697378] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
[ 333.698156] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ce48d4974 ]
Drop those frames causing Head-of-Line Blocking due to Scheduling
(HLBS) error to avoid HLBS interrupt flooding and netdev watchdog
timeouts due to blocked packets. Tx queues can be configured to drop
those blocked packets by setting Drop Frames causing Scheduling Error
(DFBS) bit of EST_CONTROL register.
Also, add per queue HLBS drop count.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20250925-hlbs_2-v3-1-3b39472776c2@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca94b2b036 ]
Currently, bcsp_recv() can be called even when the BCSP protocol has not
been registered. This leads to a NULL pointer dereference, as shown in
the following stack trace:
KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590
Call Trace:
<TASK>
hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627
tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290
tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
To prevent this, ensure that the HCI_UART_REGISTERED flag is set before
processing received data. If the protocol is not registered, return
-EUNATCH.
Reported-by: syzbot+4ed6852d4da4606c93da@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4ed6852d4da4606c93da
Tested-by: syzbot+4ed6852d4da4606c93da@syzkaller.appspotmail.com
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 339a87883a ]
This aligns the usage of socket sk_sndtimeo as conn_timeout when
initiating a connection and then use it when scheduling the
resulting HCI command, similar to what has been done in bf98feea5b
("Bluetooth: hci_conn: Always use sk_timeo as conn_timeout").
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d79c7d01f1 ]
If the controller has no buffers left return -ENOBUFF to indicate that
iso_cnt might be out of sync.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e94262921 ]
Implement hdev->wakeup() callback to support Wake On BT feature.
Test steps:
1. echo enabled > /sys/bus/pci/devices/0000:00:14.7/power/wakeup
2. connect bluetooth hid device
3. put the system to suspend - rtcwake -m mem -s 300
4. press any key on hid to wake up the system
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70a5ce8bc9 ]
bp->dev->dev_addr is of type `unsigned char *`. Casting it to a u32
pointer and dereferencing implies dealing manually with endianness,
which is error-prone.
Replace by calls to get_unaligned_le32|le16() helpers.
This was found using sparse:
⟩ make C=2 drivers/net/ethernet/cadence/macb_main.o
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] bottom
got restricted __le32 [usertype]
warning: incorrect type in assignment (different base types)
expected unsigned short [usertype] top
got restricted __le16 [usertype]
...
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-5-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81dcfdd21d ]
Fix to avoid cases where the `res` shell variable is
empty in script comparisons.
The comparison has been modified into string comparison to
handle other possible values the variable could assume.
The issue can be reproduced with the command:
make kselftest TARGETS=net
It solves the error:
./tfo_passive.sh: line 98: [: -eq: unary operator expected
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250925132832.9828-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b9f128947 ]
PCI devices prior to PCI 2.3 both use level interrupts and do not support
interrupt masking, leading to a failure when passed through to a KVM guest on
at least the ppc64 platform. This failure manifests as receiving and
acknowledging a single interrupt in the guest, while the device continues to
assert the level interrupt indicating a need for further servicing.
When lazy IRQ masking is used on DisINTx- (non-PCI 2.3) hardware, the following
sequence occurs:
* Level IRQ assertion on device
* IRQ marked disabled in kernel
* Host interrupt handler exits without clearing the interrupt on the device
* Eventfd is delivered to userspace
* Guest processes IRQ and clears device interrupt
* Device de-asserts INTx, then re-asserts INTx while the interrupt is masked
* Newly asserted interrupt acknowledged by kernel VMM without being handled
* Software mask removed by VFIO driver
* Device INTx still asserted, host controller does not see new edge after EOI
The behavior is now platform-dependent. Some platforms (amd64) will continue
to spew IRQs for as long as the INTX line remains asserted, therefore the IRQ
will be handled by the host as soon as the mask is dropped. Others (ppc64) will
only send the one request, and if it is not handled no further interrupts will
be sent. The former behavior theoretically leaves the system vulnerable to
interrupt storm, and the latter will result in the device stalling after
receiving exactly one interrupt in the guest.
Work around this by disabling lazy IRQ masking for DisINTx- INTx devices.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Link: https://lore.kernel.org/r/333803015.1744464.1758647073336.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01fd7cf353 ]
Since the x86-android-tablets code uses platform_create_bundle() it cannot
use EPROBE_DEFER and the driver-core will translate EPROBE_DEFER to ENXIO.
Stop using EPROBE_DEFER instead log an error and return ENODEV, or for
non-fatal cases log a warning and return 0.
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250920200713.20193-21-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4215d1cf59 ]
The RPMI System MSI interrupt controller (just like PLIC and APLIC)
needs to probed prior to devices like GED which use interrupts provided
by it. Also, it has dependency on the SBI MPXY mailbox device.
Add HIDs of RPMI System MSI and SBI MPXY mailbox devices to the honor
list so that those dependencies are handled.
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Link: https://lore.kernel.org/r/20250818040920.272664-17-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 733a763dd8 ]
The problem of having class-D initialization sequence in probe using
regmap_register_patch() is that it will do hardware register writes
immediately after being called as it bypasses regcache. Afterwards, in
aic3x_init() we also perform codec soft reset, rendering class-D init
sequence pointless. This issue is even more apparent when using reset
GPIO line, since in that case class-D amplifier initialization fails
with "Failed to init class D: -5" message as codec is already held in
reset state after requesting the reset GPIO and hence hardware I/O
fails with -EIO errno.
Thus move class-D amplifier initialization sequence from probe function
to aic3x_set_power() just before the usual regcache sync. Use bypassed
regmap_multi_reg_write_bypassed() function to make sure, class-D init
sequence is performed in proper order as described in the datasheet.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Link: https://patch.msgid.link/20250925085929.2581749-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27fa1a8b28 ]
The mclk direction now needs to be specified in endpoint node with
"system-clock-direction-out" property. However some calls to the
set_sysclk callback, related to CPU DAI clock, result in unbalanced
calls to clock API.
The set_sysclk callback in STM32 SAI driver is intended only for mclk
management. So it is relevant to ensure that calls to set_sysclk are
related to mclk only.
Since the master clock is handled only at runtime, skip the calls to
set_sysclk in the initialization phase.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20250916123118.84175-1-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8ae2640f9 ]
This commit fixes a potential race condition in the userqueue fence
signaling mechanism by replacing dma_fence_is_signaled_locked() with
dma_fence_is_signaled().
The issue occurred because:
1. dma_fence_is_signaled_locked() should only be used when holding
the fence's individual lock, not just the fence list lock
2. Using the locked variant without the proper fence lock could lead
to double-signaling scenarios:
- Hardware completion signals the fence
- Software path also tries to signal the same fence
By using dma_fence_is_signaled() instead, we properly handle the
locking hierarchy and avoid the race condition while still maintaining
the necessary synchronization through the fence_list_lock.
v2: drop the comment (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7469567d88 ]
Add a fallback mechanism to attempt pipe reset when KCQ reset
fails to recover the ring. After performing the KCQ reset and
queue remapping, test the ring functionality. If the ring test
fails, initiate a pipe reset as an additional recovery step.
v2: fix the typo (Lijo)
v3: try pipeline reset when kiq mapping fails (Lijo)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46e75c56df ]
The following code paths may result in high latency or even task hangs:
1. fastcommit io is throttled by wbt.
2. jbd2_fc_wait_bufs() might wait for a long time while
JBD2_FAST_COMMIT_ONGOING is set in journal->flags, and then
jbd2_journal_commit_transaction() waits for the
JBD2_FAST_COMMIT_ONGOING bit for a long time while holding the write
lock of j_state_lock.
3. start_this_handle() waits for read lock of j_state_lock which
results in high latency or task hang.
Given the fact that ext4_fc_commit() already modifies the current
process' IO priority to match that of the jbd2 thread, it should be
reasonable to match jbd2's IO submission flags as well.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250827121812.1477634-1-sunjunchao@bytedance.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
