[ Upstream commit 8dca36978a ]
syzbot reported[1] a use-after-free when deleting an expired fdb. It is
due to a race condition between learning still happening and a port being
deleted, after all its fdbs have been flushed. The port's state has been
toggled to disabled so no learning should happen at that time, but if we
have MST enabled, it will bypass the port's state, that together with VLAN
filtering disabled can lead to fdb learning at a time when it shouldn't
happen while the port is being deleted. VLAN filtering must be disabled
because we flush the port VLANs when it's being deleted which will stop
learning. This fix adds a check for the port's vlan group which is
initialized to NULL when the port is getting deleted, that avoids the port
state bypass. When MST is enabled there would be a minimal new overhead
in the fast-path because the port's vlan group pointer is cache-hot.
[1] https://syzkaller.appspot.com/bug?extid=dd280197f0f7ab3917be
Fixes: ec7328b591 ("net: bridge: mst: Multiple Spanning Tree (MST) mode")
Reported-by: syzbot+dd280197f0f7ab3917be@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69088ffa.050a0220.29fc44.003d.GAE@google.com/
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251105111919.1499702-2-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0216721ce7 ]
The following warning was seen when we try to connect using ssh to the device.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 104, name: dropbear
preempt_count: 1, expected: 0
INFO: lockdep is turned off.
CPU: 0 UID: 0 PID: 104 Comm: dropbear Tainted: G W 6.18.0-rc2-00399-g6f1ab1b109b9-dirty #530 NONE
Tainted: [W]=WARN
Hardware name: Generic DT based system
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x7c/0xac
dump_stack_lvl from __might_resched+0x16c/0x2b0
__might_resched from __mutex_lock+0x64/0xd34
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from lan966x_stats_get+0x5c/0x558
lan966x_stats_get from dev_get_stats+0x40/0x43c
dev_get_stats from dev_seq_printf_stats+0x3c/0x184
dev_seq_printf_stats from dev_seq_show+0x10/0x30
dev_seq_show from seq_read_iter+0x350/0x4ec
seq_read_iter from seq_read+0xfc/0x194
seq_read from proc_reg_read+0xac/0x100
proc_reg_read from vfs_read+0xb0/0x2b0
vfs_read from ksys_read+0x6c/0xec
ksys_read from ret_fast_syscall+0x0/0x1c
Exception stack(0xf0b11fa8 to 0xf0b11ff0)
1fa0: 00000001 00001000 00000008 be9048d8 00001000 00000001
1fc0: 00000001 00001000 00000008 00000003 be905920 0000001e 00000000 00000001
1fe0: 0005404c be9048c0 00018684 b6ec2cd8
It seems that we are using a mutex in a atomic context which is wrong.
Change the mutex with a spinlock.
Fixes: 12c2d0a5b8 ("net: lan966x: add ethtool configuration and statistics")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251105074955.1766792-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96baf482ca ]
KSZ9477/KSZ9897 and LAN937X families of switches use a reserved multicast
address table for some specific forwarding with some multicast addresses,
like the one used in STP. The hardware assumes the host port is the last
port in KSZ9897 family and port 5 in LAN937X family. Most of the time
this assumption is correct but not in other cases like KSZ9477.
Originally the function just setups the first entry, but the others still
need update, especially for one common multicast address that is used by
PTP operation.
LAN937x also uses different register bits when accessing the reserved
table.
Fixes: 457c182af5 ("net: dsa: microchip: generic access to ksz9477 static and reserved table")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Tested-by: Łukasz Majewski <lukma@nabladev.com>
Link: https://patch.msgid.link/20251105033741.6455-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d6ec3a793 ]
The driver calls mfd_add_devices() but fails to call mfd_remove_devices()
in error paths after successful MFD device registration and in the remove
function. This leads to resource leaks where MFD child devices are not
properly unregistered.
Replace mfd_add_devices with devm_mfd_add_devices to automatically
manage the device resources.
Fixes: c96e976d9a ("net: wan: framer: Add support for the Lantiq PEF2256 framer")
Suggested-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20251105034716.662-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bacd8d8018 ]
mlx5e_hw_gro_skb_has_enough_space() uses a formula to check if there is
enough space in the skb frags to store more data. This formula is
incorrect for 64K page sizes and it triggers early GRO session
termination because the first fragment will blow up beyond
GRO_LEGACY_MAX_SIZE.
This patch adds a special case for page sizes >= GRO_LEGACY_MAX_SIZE
(64K) which uses the skb->len instead. Within this context,
the check is safe from fragment overflow because the hardware
will continuously fill the data up to the reservation size of 64K
and the driver will coalesce all data from the same page to the same
fragment. This means that the data will span one fragment or at most
two for such a large page size.
It is expected that the if statement will be optimized out as the
check is done with constants.
Fixes: 92552d3abd ("net/mlx5e: HW_GRO cqe handler implementation")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1762238915-1027590-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae4789affd ]
The ICSSG driver does the initial FDB configuration which
includes setting the control registers. Other run time
management like learning is managed by the PRU's. The default
FDB hash size used by the firmware is 512 slots, which is
currently missing in the current driver. Update the driver
FDB config to include FDB hash size as well.
Please refer trm [1] 6.4.14.12.17 section on how the FDB config
register gets configured. From the table 6-1404, there is a reset
field for FDB_HAS_SIZE which is 4, meaning 1024 slots. Currently
the driver is not updating this reset value from 4(1024 slots) to
3(512 slots). This patch fixes this by updating the reset value
to 512 slots.
[1]: https://www.ti.com/lit/pdf/spruim2
Fixes: abd5576b9c ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251104104415.3110537-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c74619e760 ]
hwsim radios marked destroy_on_close are removed when the Netlink socket
that created them is closed. As the portid is not unique across network
namespaces, closing a socket in one namespace may remove radios in another
if it has the destroy_on_close flag set.
Instead of matching the network namespace, match the netgroup of the radio
to limit radio removal to those that have been created by the closing
Netlink socket. The netgroup of a radio identifies the network namespace
it was created in, and matching on it removes a destroy_on_close radio
even if it has been moved to another namespace.
Fixes: 100cb9ff40 ("mac80211_hwsim: Allow managing radios from non-initial namespaces")
Signed-off-by: Martin Willi <martin@strongswan.org>
Link: https://patch.msgid.link/20251103082436.30483-1-martin@strongswan.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46010d43ab ]
If 'force' is false, it will keep the memory pages and all data
structures for the context memory type if the memory is valid.
This patch always passes true for the 'force' parameter so there is
no change in behavior. Later patches will adjust the 'force' parameter
for the FW log context memory types so that the logs will not be reset
after FW reset.
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241115151438.550106-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 5204943a4c ("bnxt_en: Fix warning in bnxt_dl_reload_down()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 968d2cc07c ]
Add a new function bnxt_free_one_ctx_mem() to free one context
memory type. bnxt_free_ctx_mem() now calls the new function in
the loop to free each context memory type. There is no change in
behavior. Later patches will further make use of the new function.
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241115151438.550106-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 5204943a4c ("bnxt_en: Fix warning in bnxt_dl_reload_down()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b350b4927 ]
Add a new bit to struct bnxt_ctx_mem_type to indicate that host
memory has been successfully allocated for this context memory type.
In the next patches, we'll be adding some additional context memory
types for FW debugging/logging. If memory cannot be allocated for
any of these new types, we will not abort and the cleared mem_valid
bit will indicate to skip configuring the memory type.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-of-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241115151438.550106-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 5204943a4c ("bnxt_en: Fix warning in bnxt_dl_reload_down()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deb8eb3916 ]
In bnxt_ptp_init(), when ptp_clock_register() fails, the driver is
not freeing the memory allocated for ptp_info->pin_config. Fix it
to unconditionally free ptp_info->pin_config in bnxt_ptp_free().
Fixes: caf3eedbcd ("bnxt_en: 1PPS support for 5750X family chips")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e120f46768 ]
Raw IP packets have no MAC header, leaving skb->mac_header uninitialized.
This can trigger kernel panics on ARM64 when xfrm or other subsystems
access the offset due to strict alignment checks.
Initialize the MAC header to prevent such crashes.
This can trigger kernel panics on ARM when running IPsec over the
qmimux0 interface.
Example trace:
Internal error: Oops: 000000009600004f [#1] SMP
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.34-gbe78e49cb433 #1
Hardware name: LS1028A RDB Board (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : xfrm_input+0xde8/0x1318
lr : xfrm_input+0x61c/0x1318
sp : ffff800080003b20
Call trace:
xfrm_input+0xde8/0x1318
xfrm6_rcv+0x38/0x44
xfrm6_esp_rcv+0x48/0xa8
ip6_protocol_deliver_rcu+0x94/0x4b0
ip6_input_finish+0x44/0x70
ip6_input+0x44/0xc0
ipv6_rcv+0x6c/0x114
__netif_receive_skb_one_core+0x5c/0x8c
__netif_receive_skb+0x18/0x60
process_backlog+0x78/0x17c
__napi_poll+0x38/0x180
net_rx_action+0x168/0x2f0
Fixes: c6adf77953 ("net: usb: qmi_wwan: add qmap mux protocol support")
Signed-off-by: Qendrim Maxhuni <qendrim.maxhuni@garderos.com>
Link: https://patch.msgid.link/20251029075744.105113-1-qendrim.maxhuni@garderos.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de0337d641 ]
The TSO path called ionic_tx_map_skb() before preparing the TCP pseudo
checksum (ionic_tx_tcp_[inner_]pseudo_csum()), which may perform
skb_cow_head() and might modifies bytes in the linear header area.
Mapping first and then mutating the header risks:
- Using a stale DMA address if skb_cow_head() relocates the head, and/or
- Device reading stale header bytes on weakly-ordered systems
(CPU writes after mapping are not guaranteed visible without an
explicit dma_sync_single_for_device()).
Reorder the TX path to perform all header mutations (including
skb_cow_head()) *before* DMA mapping. Mapping is now done only after the
skb layout and header contents are final. This removes the need for any
post-mapping dma_sync and prevents on-wire corruption observed under
VLAN+TSO load after repeated runs.
This change is purely an ordering fix; no functional behavior change
otherwise.
Fixes: 0f3154e6bc ("ionic: Add Tx and Rx handling")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20251031155203.203031-2-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d261f5b09c ]
The TX path currently writes descriptors and then immediately writes to
the MMIO doorbell register to notify the NIC. On weakly ordered
architectures, descriptor writes may still be pending in CPU or DMA
write buffers when the doorbell is issued, leading to the device
fetching stale or incomplete descriptors.
Add a dma_wmb() in ionic_txq_post() to ensure all descriptor writes are
visible to the device before the doorbell MMIO write.
Fixes: 0f3154e6bc ("ionic: Add Tx and Rx handling")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Link: https://patch.msgid.link/20251031155203.203031-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1fc201148 ]
Move address list traversal in inet_assoc_attr_size() under the sock
lock to avoid holding the RCU read lock.
Suggested-by: Xin Long <lucien.xin@gmail.com>
Fixes: 8f840e47f1 ("sctp: add the sctp_diag.c file")
Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251028161506.3294376-4-stefan.wiehler@nokia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95aef86ab2 ]
For the following path not holding the sock lock,
sctp_diag_dump() -> sctp_for_each_endpoint() -> sctp_ep_dump()
make sure not to exceed bounds in case the address list has grown
between buffer allocation (time-of-check) and write (time-of-use).
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Fixes: 8f840e47f1 ("sctp: add the sctp_diag.c file")
Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251028161506.3294376-3-stefan.wiehler@nokia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0be04b5fa6 ]
The switch clears the ARL_SRCH_STDN bit when the search is done, i.e. it
finished traversing the ARL table.
This means that there will be no valid result, so we should not attempt
to read and process any further entries.
We only ever check the validity of the entries for 4 ARL bin chips, and
only after having passed the first entry to the b53_fdb_copy().
This means that we always pass an invalid entry at the end to the
b53_fdb_copy(). b53_fdb_copy() does check the validity though before
passing on the entry, so it never gets passed on.
On < 4 ARL bin chips, we will even continue reading invalid entries
until we reach the result limit.
Fixes: 1da6df85c6 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c264294624 ]
In the New Control register bit 1 is either reserved, or has a different
function:
Out of Range Error Discard
When enabled, the ingress port discards any frames
if the Length field is between 1500 and 1536
(excluding 1500 and 1536) and with good CRC.
The actual bit for enabling IP multicast is bit 0, which was only
explicitly enabled for BCM5325 so far.
For older switch chips, this bit defaults to 0, so we want to enable it
as well, while newer switch chips default to 1, and their documentation
says "It is illegal to set this bit to zero."
So drop the wrong B53_IPMC_FWD_EN define, enable the IP multicast bit
also for other switch chips. While at it, rename it to (B53_)IP_MC as
that is how it is called in Broadcom code.
Fixes: 63cc54a6f0 ("net: dsa: b53: Fix egress flooding settings")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e4ebdc160 ]
BCM63XX's switch does not support MDIO scanning of external phys, so its
MACs needs to be manually configured for autonegotiated link speeds.
So b53_force_port_config() and b53_force_link() accordingly also when
mode is MLO_AN_PHY for those ports.
Fixes lower speeds than 1000/full on rgmii ports 4 - 7.
This aligns the behaviour with the old bcm63xx_enetsw driver for those
ports.
Fixes: 967dd82ffc ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251101132807.50419-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6a8a5477f ]
There is no guarantee that the port state override registers have their
default values, as not all switches support being reset via register or
have a reset GPIO.
So when forcing port config, we need to make sure to clear all fields,
which we currently do not do for the speed and flow control
configuration. This can cause flow control stay enabled, or in the case
of speed becoming an illegal value, e.g. configured for 1G (0x2), then
setting 100M (0x1), results in 0x3 which is invalid.
For PORT_OVERRIDE_SPEED_2000M we need to make sure to only clear it on
supported chips, as the bit can have different meanings on other chips,
e.g. for BCM5389 this controls scanning PHYs for link/speed
configuration.
Fixes: 5e004460f8 ("net: dsa: b53: Add helper to set link parameters")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251101132807.50419-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f6115ad88 ]
If the memory allocation in gpiolib_seq_start() fails, the s->private
field remains uninitialized and is later dereferenced without checking
in gpiolib_seq_stop(). Initialize s->private to NULL before calling
kzalloc() and check it before dereferencing it.
Fixes: e348544f79 ("gpio: protect the list of GPIO devices with SRCU")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251103141132.53471-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5d527be7e ]
Looking up a GPIO controller by label that is the name of the software
node is wonky at best - the GPIO controller driver is free to set
a different label than the name of its firmware node. We're already being
passed a firmware node handle attached to the GPIO device to
swnode_get_gpio_device() so use it instead for a more precise lookup.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: e7f9ff5dc9 ("gpiolib: add support for software nodes")
Link: https://lore.kernel.org/r/20251103-reset-gpios-swnodes-v4-4-6461800b6775@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c211f5d7cb ]
After registering a VLAN device and setting its feature flags, we need to
synchronize the VLAN features with the lower device. For example, the VLAN
device does not have the NETIF_F_LRO flag, it should be synchronized with
the lower device based on the NETIF_F_UPPER_DISABLES definition.
As the dev->vlan_features has changed, we need to call
netdev_update_features(). The caller must run after netdev_upper_dev_link()
links the lower devices, so this patch adds the netdev_update_features()
call in register_vlan_dev().
Fixes: fd867d51f8 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251030073539.133779-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d01f8136d4 ]
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Fixes: fbb8531e58 ("selftests: extract common functions in ethtool-common.sh")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8e8486702 ]
The GRO self-test, gro.c, currently constructs IPv6 packets containing a
Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path
correctly handles IPv6 extension headers.
However, network elements may be configured to drop packets with the
Hop-by-Hop Options header (HBH). This causes the self-test to fail
in environments where such network elements are present.
To improve the robustness and reliability of this test in diverse
network environments, switch from using IPPROTO_HOPOPTS to
IPPROTO_DSTOPTS (Destination Options).
The Destination Options header is less likely to be dropped by
intermediate routers and still serves the core purpose of the test:
validating GRO's handling of an IPv6 extension header. This change
ensures the test can execute successfully without being incorrectly
failed by network policies outside the kernel's control.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02d064de05 ]
Due to the gro_sender sending data packets and FIN packets
in very quick succession, these are received almost simultaneously
by the gro_receiver. FIN packets are sometimes processed before the
data packets leading to intermittent (~1/100) test failures.
This change adds a delay of 100ms before sending FIN packets
in gro:tcp test to avoid the out-of-order delivery. The same
mitigation already exists for the gro:ip test.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030062818.1562228-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d18a84edd ]
The internal switch on BCM63XX SoCs will unconditionally add 802.1Q VLAN
tags on egress to CPU when 802.1Q mode is enabled. We do this
unconditionally since commit ed409f3bba ("net: dsa: b53: Configure
VLANs while not filtering").
This is fine for VLAN aware bridges, but for standalone ports and vlan
unaware bridges this means all packets are tagged with the default VID,
which is 0.
While the kernel will treat that like untagged, this can break userspace
applications processing raw packets, expecting untagged traffic, like
STP daemons.
This also breaks several bridge tests, where the tcpdump output then
does not match the expected output anymore.
Since 0 isn't a valid VID, just strip out the VLAN tag if we encounter
it, unless the priority field is set, since that would be a valid tag
again.
Fixes: 964dbf186e ("net: dsa: tag_brcm: add support for legacy tags")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20251027194621.133301-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4daaf063f ]
Move brcm_leg_tag_rcv() definition to top.
This function is going to be shared between two different tags.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-2-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 3d18a84edd ("net: dsa: tag_brcm: legacy: fix untagged rx on unbridged ports for bcm63xx")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c21cf89a6 ]
The memory allocated for ptr using kvmalloc() is not freed on the last
error path. Fix that by freeing it on that error path.
Fixes: 9a24ce5e29 ("Bluetooth: btrtl: Firmware format v2 support")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c5f1f6468 ]
In hci_cmd_complete_evt(), if the command complete event has an unknown
opcode, we assume the first byte of the remaining skb->data contains the
return status. However, parameter data has previously been pulled in
hci_event_func(), which may leave the skb empty. If so, using skb->data[0]
for the return status uses un-init memory.
The fix is to check skb->len before using skb->data.
Reported-by: syzbot+a9a4bedfca6aa9d7fa24@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a9a4bedfca6aa9d7fa24
Tested-by: syzbot+a9a4bedfca6aa9d7fa24@syzkaller.appspotmail.com
Fixes: afcb3369f4 ("Bluetooth: hci_event: Fix vendor (unknown) opcode status handling")
Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a74f038fa5 ]
The pt_dump_seq_puts() macro incorrectly uses seq_printf() instead of
seq_puts(). This is both a performance issue and conceptually wrong,
as the macro name suggests plain string output (puts) but the
implementation uses formatted output (printf).
The macro is used in ptdump.c:301 to output a newline character. Using
seq_printf() adds unnecessary overhead for format string parsing when
outputting this constant string.
This bug was introduced in commit 59c4da8640 ("riscv: Add support to
dump the kernel page tables") in 2020, which copied the implementation
pattern from other architectures that had the same bug.
Fixes: 59c4da8640 ("riscv: Add support to dump the kernel page tables")
Signed-off-by: Josephine Pfeiffer <hi@josie.lol>
Link: https://lore.kernel.org/r/20251018170451.3355496-1-hi@josie.lol
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 060ea84a48 ]
Unwinding the stack of a task other than current, KASAN would report
"BUG: KASAN: out-of-bounds in walk_stackframe+0x41c/0x460"
There is a same issue on x86 and has been resolved by the commit
84936118bd ("x86/unwind: Disable KASAN checks for non-current tasks")
The solution could be applied to RISC-V too.
This patch also can solve the issue:
https://seclists.org/oss-sec/2025/q4/23
Fixes: 5d8544e2d0 ("RISC-V: Generic library routines and assembly")
Co-developed-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Signed-off-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251022072608.743484-1-zhangchunyan@iscas.ac.cn
[pjw@kernel.org: clean up checkpatch issues]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a04ea57aae upstream.
The device bus LAN ID was obtained from PCI_FUNC(), but when a PF
port is passthrough to a virtual machine, the function number may not
match the actual port index on the device. This could cause the driver
to perform operations such as LAN reset on the wrong port.
Fix this by reading the LAN ID from port status register.
Fixes: a34b3e6ed8 ("net: txgbe: Store PCI info")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/B60A670C1F52CB8E+20251104062321.40059-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa997d2d2a upstream.
The function ring_buffer_map_get_reader() is a bit more strict than the
other get reader functions, and except for certain situations the
rb_get_reader_page() should not return NULL. If it does, it triggers a
warning.
This warning was triggering but after looking at why, it was because
another acceptable situation was happening and it wasn't checked for.
If the reader catches up to the writer and there's still data to be read
on the reader page, then the rb_get_reader_page() will return NULL as
there's no new page to get.
In this situation, the reader page should not be updated and no warning
should trigger.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Reported-by: syzbot+92a3745cea5ec6360309@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/690babec.050a0220.baf87.0064.GAE@google.com/
Link: https://lore.kernel.org/20251016132848.1b11bb37@gandalf.local.home
Fixes: 117c39200d ("ring-buffer: Introducing ring-buffer mapping functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27afd6e066 upstream.
vb2_ioctl_remove_bufs() call manipulates queue internal buffer list,
potentially overwriting some pointers used by the legacy fileio access
mode. Forbid that ioctl when fileio is active to protect internal queue
state between subsequent read/write calls.
CC: stable@vger.kernel.org
Fixes: a3293a8538 ("media: v4l2: Add REMOVE_BUFS ioctl")
Reported-by: Shuangpeng Bai <SJB7183@psu.edu>
Closes: https://lore.kernel.org/linux-media/5317B590-AAB4-4F17-8EA1-621965886D49@psu.edu/
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 758dbc756a upstream.
Some devices, like the Grandstream GUV3100 webcam, have an invalid UVC
descriptor where multiple entities share the same ID, this is invalid
and makes it impossible to make a proper entity tree without heuristics.
We have recently introduced a change in the way that we handle invalid
entities that has caused a regression on broken devices.
Implement a new heuristic to handle these devices properly.
Reported-by: Angel4005 <ooara1337@gmail.com>
Closes: https://lore.kernel.org/linux-media/CAOzBiVuS7ygUjjhCbyWg-KiNx+HFTYnqH5+GJhd6cYsNLT=DaA@mail.gmail.com/
Fixes: 0e2ee70291 ("media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID")
Cc: stable@vger.kernel.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2618849f31 upstream.
[BUG]
During development of a minor feature (make sure all btrfs_bio::end_io()
is called in task context), I noticed a crash in generic/388, where
metadata writes triggered new works after btrfs_stop_all_workers().
It turns out that it can even happen without any code modification, just
using RAID5 for metadata and the same workload from generic/388 is going
to trigger the use-after-free.
[CAUSE]
If btrfs hits an error, the fs is marked as error, no new
transaction is allowed thus metadata is in a frozen state.
But there are some metadata modifications before that error, and they are
still in the btree inode page cache.
Since there will be no real transaction commit, all those dirty folios
are just kept as is in the page cache, and they can not be invalidated
by invalidate_inode_pages2() call inside close_ctree(), because they are
dirty.
And finally after btrfs_stop_all_workers(), we call iput() on btree
inode, which triggers writeback of those dirty metadata.
And if the fs is using RAID56 metadata, this will trigger RMW and queue
new works into rmw_workers, which is already stopped, causing warning
from queue_work() and use-after-free.
[FIX]
Add a special handling for write_one_eb(), that if the fs is already in
an error state, immediately mark the bbio as failure, instead of really
submitting them.
Then during close_ctree(), iput() will just discard all those dirty
tree blocks without really writing them back, thus no more new jobs for
already stopped-and-freed workqueues.
The extra discard in write_one_eb() also acts as an extra safenet.
E.g. the transaction abort is triggered by some extent/free space
tree corruptions, and since extent/free space tree is already corrupted
some tree blocks may be allocated where they shouldn't be (overwriting
existing tree blocks). In that case writing them back will further
corrupting the fs.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 284922f4c5 ]
The runtime-const infrastructure was never designed to handle the
modular case, because the constant fixup is only done at boot time for
core kernel code.
But by the time I used it for the x86-64 user space limit handling in
commit 86e6b1547b ("x86: fix user address masking non-canonical
speculation issue"), I had completely repressed that fact.
And it all happens to work because the only code that currently actually
gets inlined by modules is for the access_ok() limit check, where the
default constant value works even when not fixed up. Because at least I
had intentionally made it be something that is in the non-canonical
address space region.
But it's technically very wrong, and it does mean that at least in
theory, the use of 'access_ok()' + '__get_user()' can trigger the same
speculation issue with non-canonical addresses that the original commit
was all about.
The pattern is unusual enough that this probably doesn't matter in
practice, but very wrong is still very wrong. Also, let's fix it before
the nice optimized scoped user accessor helpers that Thomas Gleixner is
working on cause this pseudo-constant to then be more widely used.
This all came up due to an unrelated discussion with Mateusz Guzik about
using the runtime const infrastructure for names_cachep accesses too.
There the modular case was much more obviously broken, and Mateusz noted
it in his 'v2' of the patch series.
That then made me notice how broken 'access_ok()' had been in modules
all along. Mea culpa, mea maxima culpa.
Fix it by simply not using the runtime-const code in modules, and just
using the USER_PTR_MAX variable value instead. This is not
performance-critical like the core user accessor functions (get_user()
and friends) are.
Also make sure this doesn't get forgotten the next time somebody wants
to do runtime constant optimizations by having the x86 runtime-const.h
header file error out if included by modules.
Fixes: 86e6b1547b ("x86: fix user address masking non-canonical speculation issue")
Acked-by: Borislav Petkov <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Triggered-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/all/20251030105242.801528-1-mjguzik@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd72baff22 ]
Add an assembly macro to refer runtime cost. It hides linker magic and
makes assembly more readable.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304153342.2016569-1-kirill.shutemov@linux.intel.com
Stable-dep-of: 284922f4c5 ("x86: uaccess: don't use runtime-const rewriting in modules")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91309a7082 ]
This was a suggestion by David Laight, and while I was slightly worried
that some micro-architecture would predict cmov like a conditional
branch, there is little reason to actually believe any core would be
that broken.
Intel documents that their existing cores treat CMOVcc as a data
dependency that will constrain speculation in their "Speculative
Execution Side Channel Mitigations" whitepaper:
"Other instructions such as CMOVcc, AND, ADC, SBB and SETcc can also
be used to prevent bounds check bypass by constraining speculative
execution on current family 6 processors (Intel® Core™, Intel® Atom™,
Intel® Xeon® and Intel® Xeon Phi™ processors)"
and while that leaves the future uarch issues open, that's certainly
true of our traditional SBB usage too.
Any core that predicts CMOV will be unusable for various crypto
algorithms that need data-independent timing stability, so let's just
treat CMOV as the safe choice that simplifies the address masking by
avoiding an extra instruction and doesn't need a temporary register.
Suggested-by: David Laight <David.Laight@aculab.com>
Link: https://www.intel.com/content/dam/develop/external/us/en/documents/336996-speculative-execution-side-channel-mitigations.pdf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: 284922f4c5 ("x86: uaccess: don't use runtime-const rewriting in modules")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22c73d52a6 ]
The mds auth caps check should also validate the
fsname along with the associated caps. Not doing
so would result in applying the mds auth caps of
one fs on to the other fs in a multifs ceph cluster.
The bug causes multiple issues w.r.t user
authentication, following is one such example.
Steps to Reproduce (on vstart cluster):
1. Create two file systems in a cluster, say 'fsname1' and 'fsname2'
2. Authorize read only permission to the user 'client.usr' on fs 'fsname1'
$ceph fs authorize fsname1 client.usr / r
3. Authorize read and write permission to the same user 'client.usr' on fs 'fsname2'
$ceph fs authorize fsname2 client.usr / rw
4. Update the keyring
$ceph auth get client.usr >> ./keyring
With above permssions for the user 'client.usr', following is the
expectation.
a. The 'client.usr' should be able to only read the contents
and not allowed to create or delete files on file system 'fsname1'.
b. The 'client.usr' should be able to read/write on file system 'fsname2'.
But, with this bug, the 'client.usr' is allowed to read/write on file
system 'fsname1'. See below.
5. Mount the file system 'fsname1' with the user 'client.usr'
$sudo bin/mount.ceph usr@.fsname1=/ /kmnt_fsname1_usr/
6. Try creating a file on file system 'fsname1' with user 'client.usr'. This
should fail but passes with this bug.
$touch /kmnt_fsname1_usr/file1
7. Mount the file system 'fsname1' with the user 'client.admin' and create a
file.
$sudo bin/mount.ceph admin@.fsname1=/ /kmnt_fsname1_admin
$echo "data" > /kmnt_fsname1_admin/admin_file1
8. Try removing an existing file on file system 'fsname1' with the user
'client.usr'. This shoudn't succeed but succeeds with the bug.
$rm -f /kmnt_fsname1_usr/admin_file1
For more information, please take a look at the corresponding mds/fuse patch
and tests added by looking into the tracker mentioned below.
v2: Fix a possible null dereference in doutc
v3: Don't store fsname from mdsmap, validate against
ceph_mount_options's fsname and use it
v4: Code refactor, better warning message and
fix possible compiler warning
[ Slava.Dubeyko: "fsname check failed" -> "fsname mismatch" ]
Link: https://tracker.ceph.com/issues/72167
Signed-off-by: Kotresh HR <khiremat@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53db6f25ee ]
The wake_up_bit() is called in ceph_async_unlink_cb(),
wake_async_create_waiters(), and ceph_finish_async_create().
It makes sense to switch on clear_bit() function, because
it makes the code much cleaner and easier to understand.
More important rework is the adding of smp_mb__after_atomic()
memory barrier after the bit modification and before
wake_up_bit() call. It can prevent potential race condition
of accessing the modified bit in other threads. Luckily,
clear_and_wake_up_bit() already implements the required
functionality pattern:
static inline void clear_and_wake_up_bit(int bit, unsigned long *word)
{
clear_bit_unlock(bit, word);
/* See wake_up_bit() for which memory barrier you need to use. */
smp_mb__after_atomic();
wake_up_bit(word, bit);
}
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5824ccba9a ]
The Coverity Scan service has detected potential
race condition in ceph_ioctl_lazyio() [1].
The CID 1591046 contains explanation: "Check of thread-shared
field evades lock acquisition (LOCK_EVASION). Thread1 sets
fmode to a new value. Now the two threads have an inconsistent
view of fmode and updates to fields correlated with fmode
may be lost. The data guarded by this critical section may
be read while in an inconsistent state or modified by multiple
racing threads. In ceph_ioctl_lazyio: Checking the value of
a thread-shared field outside of a locked region to determine
if a locked operation involving that thread shared field
has completed. (CWE-543)".
The patch places fi->fmode field access under ci->i_ceph_lock
protection. Also, it introduces the is_file_already_lazy
variable that is set under the lock and it is checked later
out of scope of critical section.
[1] https://scan5.scan.coverity.com/#/project-view/64304/10063?selectedIssue=1591046
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7ed1e29cf ]
The Coverity Scan service has detected the calling of
wait_for_completion_killable() without checking the return
value in ceph_lock_wait_for_completion() [1]. The CID 1636232
defect contains explanation: "If the function returns an error
value, the error value may be mistaken for a normal value.
In ceph_lock_wait_for_completion(): Value returned from
a function is not checked for errors before being used. (CWE-252)".
The patch adds the checking of wait_for_completion_killable()
return value and return the error code from
ceph_lock_wait_for_completion().
[1] https://scan5.scan.coverity.com/#/project-view/64304/10063?selectedIssue=1636232
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7574f30337 ]
If mmap write lock is taken while draining retry fault, mmap write lock
is not released because svm_range_restore_pages calls mmap_read_unlock
then returns. This causes deadlock and system hangs later because mmap
read or write lock cannot be taken.
Downgrade mmap write lock to read lock if draining retry fault fix this
bug.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
