under low power state a SoundWire Wake IRQ could trigger MBHC interrupts
so make sure that codec is not in suspended state when this happens.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-17-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire Frame sync to be generated correctly we need both MCLK
and MCLKx2 (npl). Without pm runtime enabled these two clocks will remain on,
however after adding pm runtime support its possible that NPl clock could be
turned off even when SoundWire controller is active.
Fix this by enabling mclk and npl clk when SoundWire clks are enabled.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-10-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire Frame sync to be generated correctly we need both MCLK
and MCLKx2 (npl). Without pm runtime enabled these two clocks will remain on,
however after adding pm runtime support its possible that NPl clock could be
turned off even when SoundWire controller is active.
Fix this by enabling mclk and npl clk when SoundWire clks are enabled.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-9-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire Frame sync to be generated correctly we need both MCLK
and MCLKx2 (npl). Without pm runtime enabled these two clocks will remain on,
however after adding pm runtime support its possible that NPl clock could be
turned off even when SoundWire controller is active.
Fix this by enabling mclk and npl clk when SoundWire clks are enabled.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using bulk clocks and referencing them individually using array index is
not great for readers.
So move them to individual clocks handling and also remove some unnecessary
error handling in the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using bulk clocks and referencing them individually using array index is
not great for readers.
So move them to individual clocks handling and also remove some unnecessary
error handling in the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using bulk clocks and referencing them individually using array index is
not great for readers.
So move them to individual clocks handling and also remove some unnecessary
error handling in the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using bulk clocks and referencing them individually using array index is
not great for readers.
So move them to individual clocks handling and also remove some unnecessary
error handling in the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
* kvm-arm64/psci-1.1:
: .
: Limited PSCI-1.1 support from Will Deacon:
:
: This small series exposes the PSCI SYSTEM_RESET2 call to guests, which
: allows the propagation of a "reset_type" and a "cookie" back to the VMM.
: Although Linux guests only ever pass 0 for the type ("SYSTEM_WARM_RESET"),
: the vendor-defined range can be used by a bootloader to provide additional
: information about the reset, such as an error code.
: .
KVM: arm64: Remove unneeded semicolons
KVM: arm64: Indicate SYSTEM_RESET2 in kvm_run::system_event flags field
KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest
KVM: arm64: Bump guest PSCI version to 1.1
Signed-off-by: Marc Zyngier <maz@kernel.org>
fix issue
/builds/robherring/linux-dt/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.example.dt.yaml:
spi@9C002D80: 'clocks-names' is a required property
From schema: /builds/robherring/linux-dt/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
delete unused required(clock-name)
Fixes: 3b8ab4da34 ("spi: Fix test error for sp7021")
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Li-hao Kuo <lhjeff911@gmail.com>
Link: https://lore.kernel.org/r/097bbc8b703b17e8fb3e3f6f6d2f97fe668bd5c5.1645770648.git.lhjeff911@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes the tristate configuration for i2c3 function assigned
to the dtf pins on the Tamonten Tegra20 SoM.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The function devm_kzalloc() in acp_legacy_dai_links_create() can fail,
so its return value should be checked.
Fixes: d4c750f2c7 ("ASoC: amd: acp: Add generic machine driver support for ACP cards")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20220225131645.27556-1-baijiaju1990@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function devm_kzalloc() in rt5663_parse_dp() can fail, so its return
value should be checked.
Fixes: 457c25efc5 ("ASoC: rt5663: Add the function of impedance sensing")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20220225131030.27248-1-baijiaju1990@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Other commit added the declaration of the sof_compressed_ops, drop the
instance which added it as Platform specific ops, which the
sof_compressed_ops is not.
76cdd90b27 ("ASoC: SOF: pcm: Add compress_ops for SOF platform component driver")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220225120034.11028-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220225112358.19403-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit b0c6ae0f89.
Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return
-EOPNOTSUPP from phy_power_on() callback anymore.
So remove dead code which handles -EOPNOTSUPP return value.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20220203214444.1508-6-kabel@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit 3241929b67.
Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return
-EOPNOTSUPP from phy_power_on() callback anymore.
So remove XHCI_SKIP_PHY_INIT flag from xhci_mvebu_a3700_plat_setup() and
then also whole xhci_mvebu_a3700_plat_setup() function which is there just
to handle -EOPNOTSUPP for XHCI_SKIP_PHY_INIT.
xhci plat_setup callback is not used by any other xhci plat driver, so
remove this callback completely.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220203214444.1508-5-kabel@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit 45aefe3d22.
Armada 3720 PHY driver (phy-mvebu-a3700-comphy.c) does not return
-EOPNOTSUPP from phy_power_on() callback anymore.
So remove AHCI_HFLAG_IGN_NOTSUPP_POWER_ON flag from Armada 3720 plat data.
AHCI_HFLAG_IGN_NOTSUPP_POWER_ON is not used by any other ahci driver, so
remove this flag completely.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220203214444.1508-4-kabel@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Remove old RPC implementation and add a new native kernel implementation.
The old implementation uses ARM SMC API to issue RPC calls to ARM Trusted
Firmware which provides real implementation of PHY configuration.
But older versions of ARM Trusted Firmware do not provide this PHY
configuration functionality, simply returning: operation not supported; or
worse, some versions provide the configuration functionality incorrectly.
For example the firmware shipped in ESPRESSObin board has this older
version of ARM Trusted Firmware and therefore SATA, USB 3.0 and PCIe
functionality do not work with newer versions of Linux kernel.
Due to the above reasons, the following commits were introduced into Linux,
to workaround these issues by ignoring -EOPNOTSUPP error code from
phy-mvebu-a3700-comphy driver function phy_power_on():
commit 45aefe3d22 ("ata: ahci: mvebu: Make SATA PHY optional for Armada
3720")
commit 3241929b67 ("usb: host: xhci: mvebu: make USB 3.0 PHY optional for
Armada 3720")
commit b0c6ae0f89 ("PCI: aardvark: Fix initialization with old Marvell's
Arm Trusted Firmware")
Replace this RPC implementation with proper native kernel implementation,
which is independent on the firmware. Never return -EOPNOTSUPP for proper
arguments.
This should solve multiple issues with real-world boards, where it is not
possible or really inconvenient to change the firmware. Let's eliminate
these issues.
This implementation is ported directly from Armada 3720 comphy driver found
in newest version of ARM Trusted Firmware source code, but with various
fixes of register names, some added comments, some refactoring due to the
original code not conforming to kernel standards. Also PCIe mode poweroff
support was added here, and PHY reset support. These changes are also going
to be sent to ARM Trusted Firmware.
[ Pali did the porting from ATF.
I (Marek) then fixed some register names, some various other things,
added some comments and refactored the code to kernel standards. Also
fixed PHY poweroff and added PHY reset. ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20220203214444.1508-3-kabel@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Port number is encoded into argument for SMC call. It is zero for SATA,
PCIe and also both USB 3.0 PHYs. It is non-zero only for Ethernet PHY
(incorrectly called SGMII) on lane 0. Ethernet PHY on lane 1 also uses zero
port number.
So construct "port" bits for SMC call argument can be constructed directly
from PHY type and lane number.
Change driver code to always pass zero port number for non-ethernet PHYs
and for ethernet PHYs determinate port number from lane number. This
simplifies the driver.
As port number from DT PHY configuration is not used anymore, remove whole
driver code which parses it. This also simplifies the driver.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220203214444.1508-2-kabel@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The arm,armv8-pmuv3 compatible string is meant to be used only for
software models and not silicon chips. Drop them and use silicon-
specific compatible strings instead.
Signed-off-by: Thierry Reding <treding@nvidia.com>
QARMA3 is relaxed version of the QARMA5 algorithm which expected to
reduce the latency of calculation while still delivering a suitable
level of security.
Support for QARMA3 can be discovered via ID_AA64ISAR2_EL1
APA3, bits [15:12] Indicates whether the QARMA3 algorithm is
implemented in the PE for address
authentication in AArch64 state.
GPA3, bits [11:8] Indicates whether the QARMA3 algorithm is
implemented in the PE for generic code
authentication in AArch64 state.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220224124952.119612-4-vladimir.murzin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In preparation of supporting PAuth QARMA3 architected algorithm mark
existing one as QARMA5, so we can distingwish between two.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220224124952.119612-3-vladimir.murzin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In case, both boot_val and sec_val have value below min_field_value we
would wrongly report that address authentication is supported. It is
not a big issue because we enable address authentication based on boot
cpu (and check there is correct).
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220224124952.119612-2-vladimir.murzin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
This patch enables the ultravisor adapter interruption vitualization
support indicated by UV feature BIT_UV_FEAT_AIV. This allows ISC
interruption injection directly into the GISA IPM for PV kvm guests.
Hardware that does not support this feature will continue to use the
UV interruption interception method to deliver ISC interruptions to
PV kvm guests. For this purpose, the ECA_AIV bit for all guest cpus
will be cleared and the GISA will be disabled during PV CPU setup.
In addition a check in __inject_io() has been removed. That reduces the
required instructions for interruption handling for PV and traditional
kvm guests.
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220209152217.1793281-2-mimu@linux.ibm.com
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Add check for zero usable stolen memory before calling drm_mm_init
to support configurations where stolen memory exists but is fully
reserved.
Also skip memory test in cases that usable stolen is smaller than
page size(amount mapped and used to test memory).
v2:
- skiping test if available memory is smaller than page size (Lucas)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Steve Carbonari <steven.carbonari@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223194946.725328-1-jose.souza@intel.com
For cleanliness, do not leave a stale GVA in the cache after all the roots are
cleared. In practice, kvm_mmu_load will go through kvm_mmu_sync_roots if
paging is on, and will not use vcpu_match_mmio_gva at all if paging is off.
However, leaving data in the cache might cause bugs in the future.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the guest PGD is now loaded after the MMU has been set up
completely, the desired role for a cache hit is simply the current
mmu_role. There is no need to compute it again, so __kvm_mmu_new_pgd
can be folded in kvm_mmu_new_pgd.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that __kvm_mmu_new_pgd does not look at the MMU's root_level and
shadow_root_level anymore, pull the PGD load after the initialization of
the shadow MMUs.
Besides being more intuitive, this enables future simplifications
and optimizations because it's not necessary anymore to compute the
role outside kvm_init_mmu. In particular, kvm_mmu_reset_context was not
attempting to use a cached PGD to avoid having to figure out the new role.
With this change, it could follow what nested_{vmx,svm}_load_cr3 are doing,
and avoid unloading all the cached roots.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, PGD caching avoids placing a PAE root in the cache by using the
old value of mmu->root_level and mmu->shadow_root_level; it does not look
for a cached PGD if the old root is a PAE one, and then frees it using
kvm_mmu_free_roots.
Change the logic instead to free the uncacheable root early.
This way, __kvm_new_mmu_pgd is able to look up the cache when going from
32-bit to 64-bit (if there is a hit, the invalid root becomes the least
recently used). An example of this is nested virtualization with shadow
paging, when a 64-bit L1 runs a 32-bit L2.
As a side effect (which is actually the reason why this patch was
written), PGD caching does not use the old value of mmu->root_level
and mmu->shadow_root_level anymore.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These functions only operate on a given MMU, of which there is more
than one in a vCPU (we care about two, because the third does not have
any roots and is only used to walk guest page tables). They do need a
struct kvm in order to lock the mmu_lock, but they do not needed anything
else in the struct kvm_vcpu. So, pass the vcpu->kvm directly to them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, PGD caching requires a complicated dance of first computing
the MMU role and passing it to __kvm_mmu_new_pgd(), and then separately calling
kvm_init_mmu().
Part of this is due to kvm_mmu_free_roots using mmu->root_level and
mmu->shadow_root_level to distinguish whether the page table uses a single
root or 4 PAE roots. Because kvm_init_mmu() can overwrite mmu->root_level,
kvm_mmu_free_roots() must be called before kvm_init_mmu().
However, even after kvm_init_mmu() there is a way to detect whether the
page table may hold PAE roots, as root.hpa isn't backed by a shadow when
it points at PAE roots. Using this method results in simpler code, and
is one less obstacle in moving all calls to __kvm_mmu_new_pgd() after the
MMU has been initialized.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The root_hpa and root_pgd fields form essentially a struct kvm_mmu_root_info.
Use the struct to have more consistency between mmu->root and
mmu->prev_roots.
The patch is entirely search and replace except for cached_root_available,
which does not need a temporary struct kvm_mmu_root_info anymore.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN and bail if KVM attempts to free a root that isn't backed by a shadow
page. KVM allocates a bare page for "special" roots, e.g. when using PAE
paging or shadowing 2/3/4-level page tables with 4/5-level, and so root_hpa
will be valid but won't be backed by a shadow page. It's all too easy to
blindly call mmu_free_root_page() on root_hpa, be nice and WARN instead of
crashing KVM and possibly the kernel.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enabling async page faults is nonsensical if paging is disabled, but
it is allowed because CR0.PG=0 does not clear the async page fault
MSR. Just ignore them and only use the artificial halt state,
similar to what happens in guest mode if async #PF vmexits are disabled.
Given the increasingly complex logic, and the nicer code if the new
"if" is placed last, opportunistically change the "||" into a chain
of "if (...) return false" statements.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While the guest runs, EFER.LME cannot change unless CR0.PG is clear, and
therefore EFER.NX is the only bit that can affect the MMU role. However,
set_efer accepts a host-initiated change to EFER.LME even with CR0.PG=1.
In that case, the MMU has to be reset.
Fixes: 11988499e6 ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes")
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On a VM with PMU disabled via KVM_CAP_PMU_CONFIG, the PMU should not be
usable by the guest.
Signed-off-by: David Dunn <daviddunn@google.com>
Message-Id: <20220223225743.2703915-4-daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Carve out portion of vm_create_default so that selftests can modify
a "default" VM prior to creating vcpus.
Signed-off-by: David Dunn <daviddunn@google.com>
Message-Id: <20220223225743.2703915-3-daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new capability, KVM_CAP_PMU_CAPABILITY, that takes a bitmask of
settings/features to allow userspace to configure PMU virtualization on
a per-VM basis. For now, support a single flag, KVM_PMU_CAP_DISABLE,
to allow disabling PMU virtualization for a VM even when KVM is configured
with enable_pmu=true a module level.
To keep KVM simple, disallow changing VM's PMU configuration after vCPUs
have been created.
Signed-off-by: David Dunn <daviddunn@google.com>
Message-Id: <20220223225743.2703915-2-daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
