Commit graph

1,105,074 commits

Author SHA1 Message Date
Manish Chopra
0cc3a80179 qed*: enhance tx timeout debug info
This patch add some new qed APIs to query status block
info and report various data to MFW on tx timeout event

Along with that it enhances qede to dump more debug logs
(not just specific to the queue which was reported by stack)
on tx timeout which includes various other basic metadata about
all tx queues and other info (like status block etc.)

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-03 18:24:20 -08:00
Stafford Horne
433fe39f67 openrisc: Add clone3 ABI wrapper
Like fork and clone the clone3 syscall needs a wrapper to save callee
saved registers, which is required by the OpenRISC ABI.  This came up
after auditing code following a discussion with Rob Landley and Arnd
Bergmann [0].

Tested with the clone3 kselftests and there were no issues.

[0] https://lore.kernel.org/all/41206fc7-f8ce-98aa-3718-ba3e1431e320@landley.net/T/#m9c0cdb2703813b9df4da04cf6b30de1f1aa89944

Fixes: 07e83dfbe1 ("openrisc: Enable the clone3 syscall")
Cc: Rob Landley <rob@landley.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stafford Horne <shorne@gmail.com>
2021-12-04 11:12:09 +09:00
Stafford Horne
07baf50ac7 openrisc: Use delay slot for clone and fork wrappers
This saves one instruction.

Signed-off-by: Stafford Horne <shorne@gmail.com>
2021-12-04 11:12:09 +09:00
Stafford Horne
840b66c255 openrisc: Cleanup switch code and comments
The saving of the r12 register was there for a compiler bug referring
to a port that was never upstreamed.  It should be safe to use this
as the new compiler is what we use and the old deprecated.

Also, clean up some typos and references to old names in the switch
comments.

Signed-off-by: Stafford Horne <shorne@gmail.com>
2021-12-04 11:12:09 +09:00
Clint Taylor
dfb924e339 drm/i915/adlp: Remove require_force_probe protection
Remove force probe protection from ADL_P platform. Did not obsevre
warnings, errors, flickering or any visual defects while doing ordinary
tasks like browsing and editing documents in a two monitor setup.

For more info drm-tip idle run results :
https://intel-gfx-ci.01.org/tree/drm-tip/drmtip.html?

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211204010140.22839-1-clinton.a.taylor@intel.com
2021-12-03 17:26:27 -08:00
Lee Jones
2be6d4d16a net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero
Currently, due to the sequential use of min_t() and clamp_t() macros,
in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic
sets tx_max to 0.  This is then used to allocate the data area of the
SKB requested later in cdc_ncm_fill_tx_frame().

This does not cause an issue presently because when memory is
allocated during initialisation phase of SKB creation, more memory
(512b) is allocated than is required for the SKB headers alone (320b),
leaving some space (512b - 320b = 192b) for CDC data (172b).

However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).

Consequently the SKB bounds checking semantics fails and panics:

  skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172   \
     head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:<NULL>

  ------------[ cut here ]------------
  kernel BUG at net/core/skbuff.c:110!
  RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106
  <snip>
  Call Trace:
   <IRQ>
   skb_over_panic+0x2c/0x30 net/core/skbuff.c:115
   skb_put+0x205/0x210 net/core/skbuff.c:1877
   skb_put_zero include/linux/skbuff.h:2270 [inline]
   cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline]
   cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293
   cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514

By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX
when not offered through the system provided params, we ensure enough
data space is allocated to handle the CDC data, meaning no crash will
occur.

Cc: Oliver Neukum <oliver@neukum.org>
Fixes: 289507d336 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20211202143437.1411410-1-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-03 16:56:02 -08:00
Manish Chopra
8e227b198a qede: validate non LSO skb length
Although it is unlikely that stack could transmit a non LSO
skb with length > MTU, however in some cases or environment such
occurrences actually resulted into firmware asserts due to packet
length being greater than the max supported by the device (~9700B).

This patch adds the safeguard for such odd cases to avoid firmware
asserts.

v2: Added "Fixes" tag with one of the initial driver commit
    which enabled the TX traffic actually (as this was probably
    day1 issue which was discovered recently by some customer
    environment)

Fixes: a2ec6172d2 ("qede: Add support for link")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20211203174413.13090-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-03 16:53:37 -08:00
Maxim Mikityanskiy
da54ab1495 bpf: Fix the test_task_vma selftest to support output shorter than 1 kB
The test for bpf_iter_task_vma assumes that the output will be longer
than 1 kB, as the comment above the loop says. Due to this assumption,
the loop becomes infinite if the output turns to be shorter than 1 kB.
The return value of read_fd_into_buffer is 0 when the end of file was
reached, and len isn't being increased any more.

This commit adds a break on EOF to handle short output correctly. For
the reference, this is the contents that I get when running test_progs
under vmtest.sh, and it's shorter than 1 kB:

00400000-00401000 r--p 00000000 fe:00 25867     /root/bpf/test_progs
00401000-00674000 r-xp 00001000 fe:00 25867     /root/bpf/test_progs
00674000-0095f000 r--p 00274000 fe:00 25867     /root/bpf/test_progs
0095f000-00983000 r--p 0055e000 fe:00 25867     /root/bpf/test_progs
00983000-00a8a000 rw-p 00582000 fe:00 25867     /root/bpf/test_progs
00a8a000-0484e000 rw-p 00000000 00:00 0
7f6c64000000-7f6c64021000 rw-p 00000000 00:00 0
7f6c64021000-7f6c68000000 ---p 00000000 00:00 0
7f6c6ac8f000-7f6c6ac90000 r--s 00000000 00:0d 8032
anon_inode:bpf-map
7f6c6ac90000-7f6c6ac91000 ---p 00000000 00:00 0
7f6c6ac91000-7f6c6b491000 rw-p 00000000 00:00 0
7f6c6b491000-7f6c6b492000 r--s 00000000 00:0d 8032
anon_inode:bpf-map
7f6c6b492000-7f6c6b493000 rw-s 00000000 00:0d 8032
anon_inode:bpf-map
7ffc1e23d000-7ffc1e25e000 rw-p 00000000 00:00 0
7ffc1e3b8000-7ffc1e3bc000 r--p 00000000 00:00 0
7ffc1e3bc000-7ffc1e3bd000 r-xp 00000000 00:00 0
7fffffffe000-7ffffffff000 --xp 00000000 00:00 0

Fixes: e8168840e1 ("selftests/bpf: Add test for bpf_iter_task_vma")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211130181811.594220-1-maximmi@nvidia.com
2021-12-03 23:49:14 +01:00
Ming Lei
4cafe86c92 blk-mq: run dispatch lock once in case of issuing from list
It isn't necessary to call blk_mq_run_dispatch_ops() once for issuing
single request directly, and enough to do it one time when issuing from
whole list.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211203131534.3668411-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03 14:51:29 -07:00
Ming Lei
bcc330f42f blk-mq: pass request queue to blk_mq_run_dispatch_ops
We have switched to allocate srcu into request queue, so it is fine
to pass request queue to blk_mq_run_dispatch_ops().

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211203131534.3668411-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03 14:51:29 -07:00
Ming Lei
704b914f15 blk-mq: move srcu from blk_mq_hw_ctx to request_queue
In case of BLK_MQ_F_BLOCKING, per-hctx srcu is used to protect dispatch
critical area. However, this srcu instance stays at the end of hctx, and
it often takes standalone cacheline, often cold.

Inside srcu_read_lock() and srcu_read_unlock(), WRITE is always done on
the indirect percpu variable which is allocated from heap instead of
being embedded, srcu->srcu_idx is read only in srcu_read_lock(). It
doesn't matter if srcu structure stays in hctx or request queue.

So switch to per-request-queue srcu for protecting dispatch, and this
way simplifies quiesce a lot, not mention quiesce is always done on the
request queue wide.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211203131534.3668411-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03 14:51:29 -07:00
Ming Lei
2a904d0085 blk-mq: remove hctx_lock and hctx_unlock
Remove hctx_lock and hctx_unlock, and add one helper of
blk_mq_run_dispatch_ops() to run code block defined in dispatch_ops
with rcu/srcu read held.

Compared with hctx_lock()/hctx_unlock():

1) remove 2 branch to 1, so we just need to check
(hctx->flags & BLK_MQ_F_BLOCKING) once when running one dispatch_ops

2) srcu_idx needn't to be touched in case of non-blocking

3) might_sleep_if() can be moved to the blocking branch

Also put the added blk_mq_run_dispatch_ops() in private header, so that
the following patch can use it out of blk-mq.c.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211203131534.3668411-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03 14:51:29 -07:00
Jens Axboe
0a467d0fdd block: switch to atomic_t for request references
refcount_t is not as expensive as it used to be, but it's still more
expensive than the io_uring method of using atomic_t and just checking
for potential over/underflow.

This borrows that same implementation, which in turn is based on the
mm implementation from Linus.

Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03 14:51:29 -07:00
Jens Axboe
ceaa762527 block: move direct_IO into our own read_iter handler
Don't call into generic_file_read_iter() if we know it's O_DIRECT, just
set it up ourselves and call our own handler. This avoids an indirect call
for O_DIRECT.

Fall back to filemap_read() if we fail.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03 14:51:29 -07:00
Jens Axboe
4bdcd1dd4d mm: move filemap_range_needs_writeback() into header
No functional changes in this patch, just in preparation for efficiently
calling this light function from the block O_DIRECT handling.

Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03 14:51:26 -07:00
Eric W. Biederman
9d3f401c52 Merge SA_IMMUTABLE-fixes-for-v5.16-rc2
I completed the first batch of signal changes for v5.17 against
v5.16-rc1 before the SA_IMMUTABLE fixes where completed.  Which leaves
me with two lines of development that I want on my signal development
branch both rooted at v5.16-rc1.  Especially as I am hoping
to reach the point of being able to remove SA_IMMUTABLE.

Linus merged my SA_IMUTABLE fixes as:
7af959b5d5 ("Merge branch 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace")

To avoid rebasing the development changes that are currently complete I am
merging the work I sent upstream to Linus to make my life simpler.

The SA_IMMUTABLE changes as they are described in Linus's merge commit.

Pull exit-vs-signal handling fixes from Eric Biederman:
 "This is a small set of changes where debuggers were no longer able to
  intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit
  cleanups.

  This is essentially the change you suggested with all of i's dotted
  and the t's crossed so that ptrace can intercept all of the cases it
  has been able to intercept the past, and all of the cases that made it
  to exit without giving ptrace a chance still don't give ptrace a
  chance"

* 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: Replace force_fatal_sig with force_exit_sig when in doubt
  signal: Don't always set SA_IMMUTABLE for forced signals

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-12-03 15:36:59 -06:00
Alexei Starovoitov
78c1f8d063 libbpf: Reduce bpf_core_apply_relo_insn() stack usage.
Reduce bpf_core_apply_relo_insn() stack usage and bump
BPF_CORE_SPEC_MAX_LEN limit back to 64.

Fixes: 29db4bea1d ("bpf: Prepare relo_core.c for kernel duty.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211203182836.16646-1-alexei.starovoitov@gmail.com
2021-12-03 13:21:59 -08:00
Sean Wang
561ae1d46a Bluetooth: btmtksdio: fix resume failure
btmtksdio have to rely on MMC_PM_KEEP_POWER in pm_flags to avoid that
SDIO power is being shut off during the device is in suspend. That fixes
the SDIO command fails to access the bus after the device is resumed.

Fixes: 7f3c563c57 ("Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth")
Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com>
Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-03 22:09:59 +01:00
Sean Wang
4b4b2228f5 Bluetooth: btmtksdio: handle runtime pm only when sdio_func is available
Runtime pm ops is not aware the sdio_func status that is probably
being disabled by btmtksdio_close. Thus, we are only able to access the
sdio_func for the runtime pm operations only when the sdio_func is
available.

Fixes: 7f3c563c57 ("Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth")
Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com>
Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-03 22:09:59 +01:00
Maxim Mikityanskiy
2fa7d94afc bpf: Fix the off-by-two error in range markings
The first commit cited below attempts to fix the off-by-one error that
appeared in some comparisons with an open range. Due to this error,
arithmetically equivalent pieces of code could get different verdicts
from the verifier, for example (pseudocode):

  // 1. Passes the verifier:
  if (data + 8 > data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

  // 2. Rejected by the verifier (should still pass):
  if (data + 7 >= data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

The attempted fix, however, shifts the range by one in a wrong
direction, so the bug not only remains, but also such piece of code
starts failing in the verifier:

  // 3. Rejected by the verifier, but the check is stricter than in #1.
  if (data + 8 >= data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

The change performed by that fix converted an off-by-one bug into
off-by-two. The second commit cited below added the BPF selftests
written to ensure than code chunks like #3 are rejected, however,
they should be accepted.

This commit fixes the off-by-two error by adjusting new_range in the
right direction and fixes the tests by changing the range into the
one that should actually fail.

Fixes: fb2a311a31 ("bpf: fix off by one for range markings with L{T, E} patterns")
Fixes: b37242c773 ("bpf: add test cases to bpf selftests to cover all access tests")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211130181607.593149-1-maximmi@nvidia.com
2021-12-03 21:44:42 +01:00
Linus Torvalds
12119cfa10 VFIO fixes for v5.16-rc4
- Fix OpRegion pointer arithmetic (Zhenyu Wang)
 
  - Fix comment format triggering kernel-doc warnings (Randy Dunlap)
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmGqeUobHGFsZXgud2ls
 bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsiG2cQALLJZh/NIChZNRjX09ba
 1bSXI85vWAIXfDwxAMkMVYZDbeyGuAL4qN/DLS/nkgJN2/H4Uh+zGVC6Z8QhCBEI
 DFHtxVVleUs5sPQgLXrZy4XRiUh5v7DceQIBN5+UNZsKq3afbQ9r7V7DkZ0WXiA1
 NSiZOn+CafhEuDChlPTvTBcg6/Cw9r83I1+Rpf+vZtSUmsbyU/MSWtWe9/EYcmCE
 u5raDptULH18zVIImvuli9+dDuOlOPkgfqZnRLXYV2imPHFf2fwuSpvDFIhCDZ/M
 fwJUWE4JHHEceN4W7PnvXdqV8Gx3rsO7LaO5HQGQ7buMNqweO1zfr5Zw89mAnOQ5
 zJr5cmdNWaRPeXsdCFyD2j7R+PAschWr3k4Gl5u5caxWJOy0bEacCeKkboojP1br
 UZjEXApmvpBPWT5oSdhOMIZYyRwDSUsvpxczux3bcjieuRyzfvJckbHUGH82sEQ8
 832lLaGUo4DgdPwfimyQCL2usaRQkqJlcUxaeTWzwu+Z90xldjh73y77j3GQpKue
 AL+2anpTBQRDWU+N8Lh1uj/Pxfw/ni8LiMepT8b7FKPHRCPRvcvSSPIm7b/wKKlF
 weggu8YASn9w6bRWVxySEFmlTNPLhVUl9fA/m4GGgvEAN2j7Po8iyB9GHgwGZM2/
 WK0zcll93lEatdTLTG/PNfkB
 =3uUP
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio

Pull VFIO fixes from Alex Williamson:

 - Fix OpRegion pointer arithmetic (Zhenyu Wang)

 - Fix comment format triggering kernel-doc warnings (Randy Dunlap)

* tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio:
  vfio/pci: Fix OpRegion read
  vfio: remove all kernel-doc notation
2021-12-03 12:27:08 -08:00
Linus Torvalds
4ec6afd628 Power management fixes for 5.16-rc4
- Disable DTPM for this cycle to prevent it from causing issues
    to appear on otherwise functional systems (Daniel Lezcano).
 
  - Fix cpufreq sysfs interface failure related to physical CPU
    hot-add (Xiongfeng Wang).
 
  - Fix comment in cpufreq core and update its documentation (Tang
    Yizhou).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmGqUcISHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxQQ8P/i0mdHC9y7uNQ7nrDT4UfT8/Vq6OmgMd
 AZ4sjjzSXdcmpg+qvrqFTLYU4/R6ibKo1EkR9MsCdooGnIOkjFPwAIp0dnMRSQxC
 KJki47u9tbo1IaF2I3o5pTCYRL+KKIBFrI7ZgrfTMmtn9/VEBVdzaGFiesaPvrEy
 jbxeTncwlmELkKrZw+5hSZzB79rTVPYGXxLOyp/WfBf8DbiOzNmusfogrji50ogT
 EGUQdEuyfnA3cOtNTJGZPVObjfGJhxeyCQjjz5x0foXGThLBmz3gDIn+tNpS0kLi
 0hqWNMx9WWNPzmFgwpON49lJv42GmKzQi79QnvduIUFBZT9hXSJFsKqLreVlv39l
 VkBFKwojNUExiv31qzk0rLAhjbAvRrAQd8LxRKUGy3nwwbDAEtkMyUJAYnpC//mF
 g2dPKsCoWwPd9/g0iNPMCEEAwsAigDRX69V9SNpyFzHIbXExFrXi2IFlxJ68Pgzt
 edk2fuFqiILogPyLTqXqdgkLL6z7V1YYc6RD14WPp3s2W4ZvvOsNSGEanDMT63Hy
 YaZnIppeWy8TvRrcRZbla8rNXO4sy1QBe4QQ49n7Z24x+OScH6n0ts+brR6EMeM+
 JgD7xH3NMviHAYHhBpltNlXdKEa1Lc82y2w/Ti3bhweguURLEJjH5NkxFMDPxLQ6
 0gIrXDlmVrpd
 =mcYo
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix a CPU hot-add issue in the cpufreq core, fix a comment in
  the cpufreq core code and update its documentation, and disable the
  DTPM (Dynamic Thermal Power Management) code for the time being to
  prevent it from causing issues to appear.

  Specifics:

   - Disable DTPM for this cycle to prevent it from causing issues to
     appear on otherwise functional systems (Daniel Lezcano)

   - Fix cpufreq sysfs interface failure related to physical CPU hot-add
     (Xiongfeng Wang)

   - Fix comment in cpufreq core and update its documentation (Tang
     Yizhou)"

* tag 'pm-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap: DTPM: Drop unused local variable from init_dtpm()
  cpufreq: docs: Update core.rst
  cpufreq: Fix a comment in cpufreq_policy_free
  powercap/drivers/dtpm: Disable DTPM at boot time
  cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink()
2021-12-03 12:22:56 -08:00
Andrii Nakryiko
0bf40542c0 perf: Mute libbpf API deprecations temporarily
Libbpf development version was bumped to 0.7 in c93faaaf2f
("libbpf: Deprecate bpf_prog_load_xattr() API"), activating a bunch of
previously scheduled deprecations. Most APIs are pretty straightforward
to replace with newer APIs, but perf has a complicated mixed setup with
libbpf used both as static and shared configurations, which makes it
non-trivial to migrate the APIs.

Further, bpf_program__set_prep() needs more involved refactoring, which
will require help from Arnaldo and/or Jiri.

So for now, mute deprecation warnings and work on migrating perf off of
deprecated APIs separately with the input from owners of the perf tool.

Fixes: c93faaaf2f ("libbpf: Deprecate bpf_prog_load_xattr() API")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211203004640.2455717-1-andrii@kernel.org
2021-12-03 11:54:51 -08:00
Dan Carpenter
8722ded49c drm/i915: Fix error pointer dereference in i915_gem_do_execbuffer()
Originally "out_fence" was set using out_fence = sync_file_create() but
which returns NULL, but now it is set with out_fence = eb_requests_create()
which returns error pointers.  The error path needs to be modified to
avoid an Oops in the "goto err_request;" path.

Fixes: 544460c338 ("drm/i915: Multi-BB execbuf")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211202044831.29583-1-matthew.brost@intel.com
2021-12-03 11:47:29 -08:00
Linus Torvalds
757f3e6ddd s390 updates for 5.16-rc4
- Fix potential overlap of pseudo-MMIO addresses with MIO addresses.
 
 - Fix stack unwinder test case inline assembly compile error that
   happens with LLVM's integrated assembler.
 
 - Update defconfigs.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmGqZq8ACgkQIg7DeRsp
 bsIHuQ/+PeeVR92LJg+b8oo9L8wTQy9w2GslKpU27AGXoj9PC6iGWIfp5v+tj+L7
 LCMykCQIS51JtdtMiymEpmITiSa0hhQ9Cft4qAa3UYjWNZDzYjA03H8emBnnMTlj
 DTBKcubLguxmSTx+MDGIIkUhpicGRky08AKcf8KjF4KkBFtwSr4vcA+I07ZEoE6p
 snoUbrt9CRuPowSkn4vLDARLbRpiom+5k/QA9MnfHXtocC5ivOYvGvS44PXgGO7/
 MCSML5T+4ngv0d9jWyDqJwnRch+BkJKwWTkyNhUethc5hUJxPw+Z0XPrKQCpAQFj
 9mSLbQgf6r32wiEc3NeDnqeqAAn/GJ6QweQkuElb9+kABw7XdNxIzv+uit8eD9/F
 +9sOH4UjbBs9aRMvMEb67ZlnLQ5yWRafYPSLDMyb2UEO6CW7ns+Ekhs39HowqsiB
 phNrgZBKCiXb34wwDedswo1Vt3l1ferTIVtBbKGeDFeD7Den/FSxppWfd+ZVEtZ4
 pFK1KmvbPhFZcoqJg4SRWETASP4tZuMXQTL5Rdnr0d/nLnAQuLf/QEevV32ZIgjN
 QXm6Yre+QFLAiThSLKqKcJ5eEraEDParjkcHvL523BEEuZv7a7c/Aji6pI2gpumn
 x+cM8Iq0ZzLBqDFZaVCtz0gcQ2ctUaFzjdTXvpSGEXw3K/iPovE=
 =+u2H
 -----END PGP SIGNATURE-----

Merge tag 's390-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:

 - Fix potential overlap of pseudo-MMIO addresses with MIO addresses

 - Fix stack unwinder test case inline assembly compile error that
   happens with LLVM's integrated assembler

 - Update defconfigs

* tag 's390-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfigs
  s390/pci: move pseudo-MMIO to prevent MIO overlap
  s390/test_unwind: use raw opcode instead of invalid instruction
2021-12-03 11:46:20 -08:00
Jakub Kicinski
8581fd402a treewide: Add missing includes masked by cgroup -> bpf dependency
cgroup.h (therefore swap.h, therefore half of the universe)
includes bpf.h which in turn includes module.h and slab.h.
Since we're about to get rid of that dependency we need
to clean things up.

v2: drop the cpu.h include from cacheinfo.h, it's not necessary
and it makes riscv sensitive to ordering of include files.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/all/20211120035253.72074-1-kuba@kernel.org/  # v1
Link: https://lore.kernel.org/all/20211120165528.197359-1-kuba@kernel.org/ # cacheinfo discussion
Link: https://lore.kernel.org/bpf/20211202203400.1208663-1-kuba@kernel.org
2021-12-03 10:58:13 -08:00
Linus Torvalds
a2aeaeabbc arm64 fixes for -rc4
- Add missing BTI landing instructions to the ftrace*_caller trampolines
 
 - Fix kexec() WARN when DEBUG_VIRTUAL is enabled
 
 - Fix PAC documentation by removing stale references to compiler flags
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmGp/DwQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNBRNCACxT4pnnSuZssYZLdn+bVh9ahLqDwATfsYQ
 NZJEzPmaS2QoLZZ3a6ZwRUjnH7VAfsxHyq17m1SN8Hbx5mh3ZkWNbN4sEy8vlLz8
 m7NK0YKU12SMlP8Vmlgw9gzXgk4yQ/OnK2Jl50SQCGkT3MvCohx16X4lcY+M1oTq
 2+9Rwbpi05T0G7rIFQFPwWqbJyiCoJ0Xr/iVmo1IX74yVp0oT1SGTBADcIsCIHRO
 /xVlsHEsOQWtguZcwZE8UDVtBCgrZFnJh3P+EENlRBZ48ANsWCcQpGMf+wrsrG+l
 chIKU3oLFLe1JcNV1zG8D8RdwQA9r/MSzq0KZFJTw+CNvM11AqAg
 =JEy/
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "Three arm64 fixes for -rc4.

  One of them is just a trivial documentation fix, whereas the other two
  address a warning in the kexec code and a crash in ftrace on systems
  implementing BTI.

  The latter patch has a couple of ugly ifdefs which Mark plans to clean
  up separately, but as-is the patch is straightforward for backporting
  to stable kernels.

  Summary:

   - Add missing BTI landing instructions to the ftrace*_caller
     trampolines

   - Fix kexec() WARN when DEBUG_VIRTUAL is enabled

   - Fix PAC documentation by removing stale references to compiler
     flags"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: ftrace: add missing BTIs
  arm64: kexec: use __pa_symbol(empty_zero_page)
  arm64: update PAC description for kernel
2021-12-03 10:50:14 -08:00
Linus Torvalds
f66062c749 Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
 "I2C has another set of driver bugfixes, mostly for the stm32f7 driver"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: rk3x: Handle a spurious start completion interrupt flag
  i2c: stm32f7: use proper DMAENGINE API for termination
  i2c: stm32f7: stop dma transfer in case of NACK
  i2c: stm32f7: recover the bus on access timeout
  i2c: stm32f7: flush TX FIFO upon transfer errors
  i2c: cbus-gpio: set atomic transfer callback
2021-12-03 10:44:16 -08:00
Benjamin Berg
c97a747efc Bluetooth: btusb: Cancel sync commands for certain URB errors
Cancel sync commands when transmission of URBs fail. This is done for
both failures to send a command URB and also when the interrupt URB used
to retrieve a response fails.

This approach is sufficient to quickly deal with certain errors such as
a device being disconnected while synchronous commands are done during
initialization.

Signed-off-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-12-03 10:41:59 -08:00
Benjamin Berg
2250abadd3 Bluetooth: hci_core: Cancel sync command if sending a frame failed
If sending a frame failed any sync command associated with it will never
be completed. As such, cancel any such command immediately to avoid
timing out.

Signed-off-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-12-03 10:41:59 -08:00
Benjamin Berg
914b08b330 Bluetooth: Add hci_cmd_sync_cancel to public API
After transfer errors it makes sense to cancel an ongoing synchronous
command that cannot complete anymore. To permit this, export the old
hci_req_sync_cancel function as hci_cmd_sync_cancel in the API.

Signed-off-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-12-03 10:41:59 -08:00
Benjamin Berg
ae422391e1 Bluetooth: Reset more state when cancelling a sync command
Resetting the timers and cmd_cnt means that we assume the device will be
in a good state after the sync command finishes. Without this a chain of
synchronous commands might get stuck if one of them is cancelled.

Signed-off-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-12-03 10:41:59 -08:00
Linus Torvalds
a44f27e451 libata fixes for 5.16-rc4
Two sparse warning fixes and a couple of patches to fix an issue with
 sata_fsl driver module removal:
 
 * A couple of patches to avoid sparse warnings in libata-sata and
   in the pata_falcon driver (from Yang and Finn).
 * A couple of sata_fsl driver patches fixing IRQ free and proc
   unregister on module removal (from Baokun).
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYanzwQAKCRDdoc3SxdoY
 dhBlAP92gjrDrWQrpmO/yIpA+wY5IdzbDldY/32f/aMMOu3exAEAxiD4vQhY9x39
 qRmZyIq74zWUP9NXdqkhlLL3YYI/uA4=
 =uwTI
 -----END PGP SIGNATURE-----

Merge tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull libata fixes from Damien Le Moal:
 "Two sparse warning fixes and a couple of patches to fix an issue with
  sata_fsl driver module removal:

   - A couple of patches to avoid sparse warnings in libata-sata and in
     the pata_falcon driver (from Yang and Finn).

   - A couple of sata_fsl driver patches fixing IRQ free and proc
     unregister on module removal (from Baokun)"

* tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: replace snprintf in show functions with sysfs_emit
  sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  pata_falcon: Avoid type warnings from sparse
2021-12-03 10:38:45 -08:00
Shyam Prasad N
bbb9db5e2a cifs: avoid use of dstaddr as key for fscache client cookie
server->dstaddr can change when the DNS mapping for the
server hostname changes. But conn_id is a u64 counter
that is incremented each time a new TCP connection
is setup. So use only that as a key.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-12-03 12:38:25 -06:00
Shyam Prasad N
2adc82006b cifs: add server conn_id to fscache client cookie
The fscache client cookie uses the server address
(and port) as the cookie key. This is a problem when
nosharesock is used. Two different connections will
use duplicate cookies. Avoid this by adding
server->conn_id to the key, so that it's guaranteed
that cookie will not be duplicated.

Also, for secondary channels of a session, copy the
fscache pointer from the primary channel. The primary
channel is guaranteed not to go away as long as secondary
channels are in use.  Also addresses minor problem found
by kernel test robot.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-12-03 12:36:04 -06:00
Shyam Prasad N
5bf91ef03d cifs: wait for tcon resource_id before getting fscache super
The logic for initializing tcon->resource_id is done inside
cifs_root_iget. fscache super cookie relies on this for aux
data. So we need to push the fscache initialization to this
later point during mount.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-12-03 12:29:59 -06:00
Paulo Alcantara
65de262a20 cifs: fix missed refcounting of ipc tcon
Fix missed refcounting of IPC tcon used for getting domain-based DFS
root referrals.  We want to keep it alive as long as mount is active
and can be refreshed.  For standalone DFS root referrals it wouldn't
be a problem as the client ends up having an IPC tcon for both mount
and cache.

Fixes: c88f7dcd6d ("cifs: support nested dfs links over reconnect")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-12-03 12:29:10 -06:00
Tejas Upadhyay
af10ec31a8 drm/i915/adl_p: Add ddc pin mapping
From VBT, ddc pin info suggests the following mapping:
    VBT                                    DRIVER
    DDI TC1->ddc_pin=3 should translate to PORT_TC1->0x9
    DDI TC2->ddc_pin=4 should translate to PORT_TC2->0xa
    DDI TC3->ddc_pin=5 should translate to PORT_TC3->0xb
    DDI TC4->ddc_pin=6 should translate to PORT_TC4->0xc

Adding pin map to facilitate this translation as we cannot use existing
icl ddc pin map due to conflict with DDI C and DDI TC1 info.

Bspec:20124

v2:
  - Changed Author to Tejas Upadhyay

Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Raviteja Goud Talla <ravitejax.goud.talla@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203073720.3823371-1-ravitejax.goud.talla@intel.com
2021-12-03 10:21:36 -08:00
Lai Jiangshan
5c8f6a2e31 x86/xen: Add xenpv_restore_regs_and_return_to_usermode()
In the native case, PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is the
trampoline stack. But XEN pv doesn't use trampoline stack, so
PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is also the kernel stack.

In that case, source and destination stacks are identical, which means
that reusing swapgs_restore_regs_and_return_to_usermode() in XEN pv
would cause %rsp to move up to the top of the kernel stack and leave the
IRET frame below %rsp.

This is dangerous as it can be corrupted if #NMI / #MC hit as either of
these events occurring in the middle of the stack pushing would clobber
data on the (original) stack.

And, with  XEN pv, swapgs_restore_regs_and_return_to_usermode() pushing
the IRET frame on to the original address is useless and error-prone
when there is any future attempt to modify the code.

 [ bp: Massage commit message. ]

Fixes: 7f2590a110 ("x86/entry/64: Use a per-CPU trampoline stack for IDT entries")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lkml.kernel.org/r/20211126101209.8613-4-jiangshanlai@gmail.com
2021-12-03 19:21:15 +01:00
Lai Jiangshan
1367afaa2e x86/entry: Use the correct fence macro after swapgs in kernel CR3
The commit

  c758907004 ("x86/entry/64: Remove unneeded kernel CR3 switching")

removed a CR3 write in the faulting path of load_gs_index().

But the path's FENCE_SWAPGS_USER_ENTRY has no fence operation if PTI is
enabled, see spectre_v1_select_mitigation().

Rather, it depended on the serializing CR3 write of SWITCH_TO_KERNEL_CR3
and since it got removed, add a FENCE_SWAPGS_KERNEL_ENTRY call to make
sure speculation is blocked.

 [ bp: Massage commit message and comment. ]

Fixes: c758907004 ("x86/entry/64: Remove unneeded kernel CR3 switching")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211126101209.8613-3-jiangshanlai@gmail.com
2021-12-03 19:13:53 +01:00
Linus Torvalds
054aa8d439 fget: check that the fd still exists after getting a ref to it
Jann Horn points out that there is another possible race wrt Unix domain
socket garbage collection, somewhat reminiscent of the one fixed in
commit cbcf01128d ("af_unix: fix garbage collect vs MSG_PEEK").

See the extended comment about the garbage collection requirements added
to unix_peek_fds() by that commit for details.

The race comes from how we can locklessly look up a file descriptor just
as it is in the process of being closed, and with the right artificial
timing (Jann added a few strategic 'mdelay(500)' calls to do that), the
Unix domain socket garbage collector could see the reference count
decrement of the close() happen before fget() took its reference to the
file and the file was attached onto a new file descriptor.

This is all (intentionally) correct on the 'struct file *' side, with
RCU lookups and lockless reference counting very much part of the
design.  Getting that reference count out of order isn't a problem per
se.

But the garbage collector can get confused by seeing this situation of
having seen a file not having any remaining external references and then
seeing it being attached to an fd.

In commit cbcf01128d ("af_unix: fix garbage collect vs MSG_PEEK") the
fix was to serialize the file descriptor install with the garbage
collector by taking and releasing the unix_gc_lock.

That's not really an option here, but since this all happens when we are
in the process of looking up a file descriptor, we can instead simply
just re-check that the file hasn't been closed in the meantime, and just
re-do the lookup if we raced with a concurrent close() of the same file
descriptor.

Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-03 10:06:58 -08:00
Christian Brauner
4472071331
fs: use low-level mapping helpers
In a few places the vfs needs to interact with bare k{g,u}ids directly
instead of struct inode. These are just a few. In previous patches we
introduced low-level mapping helpers that are able to support
filesystems mounted an idmapping. This patch simply converts the places
to use these new helpers.

Link: https://lore.kernel.org/r/20211123114227.3124056-7-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-7-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-7-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-12-03 18:58:11 +01:00
Christian Brauner
8cc5c54de4
docs: update mapping documentation
Now that we implement the full remapping algorithms described in our
documentation remove the section about shortcircuting them.

Link: https://lore.kernel.org/r/20211123114227.3124056-6-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-6-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-6-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-12-03 18:58:11 +01:00
Christian Brauner
1ac2a41049
fs: account for filesystem mappings
Currently we only support idmapped mounts for filesystems mounted
without an idmapping. This was a conscious decision mentioned in
multiple places (cf. e.g. [1]).

As explained at length in [3] it is perfectly fine to extend support for
idmapped mounts to filesystem's mounted with an idmapping should the
need arise. The need has been there for some time now. Various container
projects in userspace need this to run unprivileged and nested
unprivileged containers (cf. [2]).

Before we can port any filesystem that is mountable with an idmapping to
support idmapped mounts we need to first extend the mapping helpers to
account for the filesystem's idmapping. This again, is explained at
length in our documentation at [3] but I'll give an overview here again.

Currently, the low-level mapping helpers implement the remapping
algorithms described in [3] in a simplified manner. Because we could
rely on the fact that all filesystems supporting idmapped mounts are
mounted without an idmapping the translation step from or into the
filesystem idmapping could be skipped.

In order to support idmapped mounts of filesystem's mountable with an
idmapping the translation step we were able to skip before cannot be
skipped anymore. A filesystem mounted with an idmapping is very likely
to not use an identity mapping and will instead use a non-identity
mapping. So the translation step from or into the filesystem's idmapping
in the remapping algorithm cannot be skipped for such filesystems. More
details with examples can be found in [3].

This patch adds a few new and prepares some already existing low-level
mapping helpers to perform the full translation algorithm explained in
[3]. The low-level helpers can be written in a way that they only
perform the additional translation step when the filesystem is indeed
mounted with an idmapping.

If the low-level helpers detect that they are not dealing with an
idmapped mount they can simply return the relevant k{g,u}id unchanged;
no remapping needs to be performed at all. The no_idmapping() helper
detects whether the shortcut can be used.

If the low-level helpers detected that they are dealing with an idmapped
mount but the underlying filesystem is mounted without an idmapping we
can rely on the previous shorcut and can continue to skip the
translation step from or into the filesystem's idmapping.

These checks guarantee that only the minimal amount of work is
performed. As before, if idmapped mounts aren't used the low-level
helpers are idempotent and no work is performed at all.

This patch adds the helpers mapped_k{g,u}id_fs() and
mapped_k{g,u}id_user(). Following patches will port all places to
replace the old k{g,u}id_into_mnt() and k{g,u}id_from_mnt() with these
two new helpers. After the conversion is done k{g,u}id_into_mnt() and
k{g,u}id_from_mnt() will be removed. This also concludes the renaming of
the mapping helpers we started in [4]. Now, all mapping helpers will
started with the "mapped_" prefix making everything nice and consistent.

The mapped_k{g,u}id_fs() helpers replace the k{g,u}id_into_mnt()
helpers. They are to be used when k{g,u}ids are to be mapped from the
vfs, e.g. from from struct inode's i_{g,u}id.  Conversely, the
mapped_k{g,u}id_user() helpers replace the k{g,u}id_from_mnt() helpers.
They are to be used when k{g,u}ids are to be written to disk, e.g. when
entering from a system call to change ownership of a file.

This patch only introduces the helpers. It doesn't yet convert the
relevant places to account for filesystem mounted with an idmapping.

[1]: commit 2ca4dcc490 ("fs/mount_setattr: tighten permission checks")
[2]: https://github.com/containers/podman/issues/10374
[3]: Documentations/filesystems/idmappings.rst
[4]: commit a65e58e791 ("fs: document and rename fsid helpers")

Link: https://lore.kernel.org/r/20211123114227.3124056-5-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-5-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-5-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-12-03 18:58:08 +01:00
Lai Jiangshan
c07e45553d x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()
Commit

  18ec54fdd6 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations")

added FENCE_SWAPGS_{KERNEL|USER}_ENTRY for conditional SWAPGS. In
paranoid_entry(), it uses only FENCE_SWAPGS_KERNEL_ENTRY for both
branches. This is because the fence is required for both cases since the
CR3 write is conditional even when PTI is enabled.

But

  96b2371413 ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")

changed the order of SWAPGS and the CR3 write. And it missed the needed
FENCE_SWAPGS_KERNEL_ENTRY for the user gsbase case.

Add it back by changing the branches so that FENCE_SWAPGS_KERNEL_ENTRY
can cover both branches.

  [ bp: Massage, fix typos, remove obsolete comment while at it. ]

Fixes: 96b2371413 ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211126101209.8613-2-jiangshanlai@gmail.com
2021-12-03 18:55:47 +01:00
Raviteja Goud Talla
67b858dd89 drm/i915/gen11: Moving WAs to icl_gt_workarounds_init()
Bspec page says "Reset: BUS", Accordingly moving w/a's:
Wa_1407352427,Wa_1406680159 to proper function icl_gt_workarounds_init()
Which will resolve guc enabling error

v2:
  - Previous patch rev2 was created by email client which caused the
    Build failure, This v2 is to resolve the previous broken series

Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Raviteja Goud Talla <ravitejax.goud.talla@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203145603.4006937-1-ravitejax.goud.talla@intel.com
2021-12-03 09:51:38 -08:00
Christian Brauner
476860b3eb
fs: tweak fsuidgid_has_mapping()
If the caller's fs{g,u}id aren't mapped in the mount's idmapping we can
return early and skip the check whether the mapped fs{g,u}id also have a
mapping in the filesystem's idmapping. If the fs{g,u}id aren't mapped in
the mount's idmapping they consequently can't be mapped in the
filesystem's idmapping. So there's no point in checking that.

Link: https://lore.kernel.org/r/20211123114227.3124056-4-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-4-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-4-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-12-03 18:50:28 +01:00
Christian Brauner
a793d79ea3
fs: move mapping helpers
The low-level mapping helpers were so far crammed into fs.h. They are
out of place there. The fs.h header should just contain the higher-level
mapping helpers that interact directly with vfs objects such as struct
super_block or struct inode and not the bare mapping helpers. Similarly,
only vfs and specific fs code shall interact with low-level mapping
helpers. And so they won't be made accessible automatically through
regular {g,u}id helpers.

Link: https://lore.kernel.org/r/20211123114227.3124056-3-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-3-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-3-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-12-03 18:50:17 +01:00
Dinh Nguyen
cb25b11943 ARM: socfpga: dts: fix qspi node compatible
The QSPI flash node needs to have the required "jedec,spi-nor" in the
compatible string.

Fixes: 1df99da895 ("ARM: dts: socfpga: Enable QSPI in Arria10 devkit")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-12-03 11:44:36 -06:00
Christian Brauner
bb49e9e730
fs: add is_idmapped_mnt() helper
Multiple places open-code the same check to determine whether a given
mount is idmapped. Introduce a simple helper function that can be used
instead. This allows us to get rid of the fragile open-coding. We will
later change the check that is used to determine whether a given mount
is idmapped. Introducing a helper allows us to do this in a single
place instead of doing it for multiple places.

Link: https://lore.kernel.org/r/20211123114227.3124056-2-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-2-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-2-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-12-03 18:44:06 +01:00