Commit graph

1,105,074 commits

Author SHA1 Message Date
Arnd Bergmann
c1fe8d054c ARM: riscpc: use GENERIC_IRQ_MULTI_HANDLER
This is one of the last platforms using the old entry path.
While this code path is spread over a few files, it is fairly
straightforward to convert it into an equivalent C version,
leaving the existing algorithm and all the priority handling
the same.

Unlike most irqchip drivers, this means reading the status
register(s) in a loop and always handling the highest-priority
irq first.

The IOMD_IRQREQC and IOMD_IRQREQD registers are not actaully
used here, but I left the code in place for the time being,
to keep the conversion as direct as possible. It could be
removed in a cleanup on top.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ardb: drop obsolete IOMD_IRQREQC/IOMD_IRQREQD handling]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
2021-12-03 18:43:38 +01:00
Ard Biesheuvel
d60ff2e766 ARM: riscpc: drop support for IOMD_IRQREQC/IOMD_IRQREQD IRQ groups
IOMD_IRQREQC nor IOMD_IRQREQD are ever defined, so any conditionally
compiled code that depends on them is dead code, and can be removed.

Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2021-12-03 18:42:22 +01:00
Rob Herring
b54472a02c dt-bindings: media: nxp,imx7-mipi-csi2: Drop bad if/then schema
The if/then schema for 'data-lanes' doesn't work as 'compatible' is at a
different level than 'data-lanes'. To make it work, the if/then schema
would have to be moved to the top level and then whole hierarchy of
nodes down to 'data-lanes' created. I don't think it is worth the
complexity to do that, so let's just drop it.

The error in this schema is masked by a fixup in the tools causing the
'allOf' to get overwritten. Removing the fixup as part of moving to
json-schema draft 2019-09 revealed the issue:

Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.example.dt.yaml: mipi-csi@30750000: ports:port@0:endpoint:data-lanes:0: [1] is too short
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.example.dt.yaml: mipi-csi@32e30000: ports:port@0:endpoint:data-lanes:0: [1, 2, 3, 4] is too long
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml

The if condition was always true because 'compatible' did not exist in
'endpoint' node and a non-existent property is true for json-schema.

Fixes: 85b62ff2cb ("media: dt-bindings: media: nxp,imx7-mipi-csi2: Add i.MX8MM support")
Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-media@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Link: https://lore.kernel.org/r/20211203164828.187642-1-robh@kernel.org
2021-12-03 11:33:06 -06:00
Ingo Molnar
e1cd82a339 x86/mm: Add missing <asm/cpufeatures.h> dependency to <asm/page_64.h>
In the following commit:

  025768a966 x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant

... we added the new task_size_max() inline, which uses X86_FEATURE_LA57,
but doesn't include <asm/cpufeatures.h> which defines the constant.

Due to the way alternatives macros work currently this doesn't get reported as an
immediate build error, only as a link error, if a .c file happens to include
<asm/page.h> first:

   > ld: kernel/fork.o:(.altinstructions+0x98): undefined reference to `X86_FEATURE_LA57'

In the current upstream kernel no .c file includes <asm/page.h> before including
some other header that includes <asm/cpufeatures.h>, which is why this dependency
bug went unnoticed.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-12-03 09:30:45 -08:00
Marc Zyngier
de4adddcbc of/irq: Add a quirk for controllers with their own definition of interrupt-map
Since commit 0412841812 ("of/irq: Allow matching of an interrupt-map
local to an interrupt controller"), a handful of interrupt controllers
have stopped working correctly. This is due to the DT exposing a
non-sensical interrupt-map property, and their drivers relying on the
kernel ignoring this property.

Since we cannot realistically fix this terrible behaviour, add a quirk
for the limited set of devices that have implemented this monster,
and document that this is a pretty bad practice.

Fixes: 0412841812 ("of/irq: Allow matching of an interrupt-map local to an interrupt controller")
Cc: Rob Herring <robh@kernel.org>
Cc: John Crispin <john@phrozen.org>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211201114102.13446-1-maz@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
2021-12-03 11:30:22 -06:00
Geert Uytterhoeven
9e4d52a00a x86/ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
The TI part is equivalent to the NXP part, and its compatible value is
not documented in the DT bindings.

Note that while the Linux driver DT match table does not contain the
compatible value of the TI part, it could still match to this part, as
i2c_device_id-based matching ignores the vendor part of the compatible
value.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lkml.kernel.org/r/0c00cec971f5c405e47d04e493d854de0efc2e49.1638539629.git.geert+renesas@glider.be
2021-12-03 18:23:57 +01:00
Ville Syrjälä
b1e4747259 drm/i915: Get rid of the "sizes are 0 based" stuff
Replace the "sizes are 0 based" stuff with just straight
up -1 where needed. Less confusing all around.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-12-03 19:18:53 +02:00
Ville Syrjälä
812e338619 drm/i915/fbc: Pimp the FBC debugfs output
Now that each plane tracks its own no_fbc_reason we can print that
out in debugfs, and we can also show which plane is currently
selected for FBC duty.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-21-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-12-03 19:15:01 +02:00
Rafael J. Wysocki
404c912187 Merge branch 'powercap'
Merge DTPM fixes for 5.16-rc4.

* powercap:
  powercap: DTPM: Drop unused local variable from init_dtpm()
  powercap/drivers/dtpm: Disable DTPM at boot time
2021-12-03 18:09:32 +01:00
Michael Sterritt
1d5379d047 x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword
Properly type the operands being passed to __put_user()/__get_user().
Otherwise, these routines truncate data for dependent instructions
(e.g., INSW) and only read/write one byte.

This has been tested by sending a string with REP OUTSW to a port and
then reading it back in with REP INSW on the same port.

Previous behavior was to only send and receive the first char of the
size. For example, word operations for "abcd" would only read/write
"ac". With change, the full string is now written and read back.

Fixes: f980f9c31a (x86/sev-es: Compile early handler code into kernel image)
Signed-off-by: Michael Sterritt <sterritt@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20211119232757.176201-1-sterritt@google.com
2021-12-03 18:09:30 +01:00
Rafael J. Wysocki
1ac5e21d43 powercap: DTPM: Drop unused local variable from init_dtpm()
The dtpm_descr variable in init_dtpm() is not used after commit
f751db8ada ("powercap/drivers/dtpm: Disable DTPM at boot time"),
so drop it.

Fixes: f751db8ada ("powercap/drivers/dtpm: Disable DTPM at boot time")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-03 17:51:59 +01:00
Vamsi krishna Lanka
40affbf8e6 clk: qcom: Add support for SDX65 RPMh clocks
Add support for clocks maintained by RPMh in SDX65 SoCs.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/366448562ac52c600c45b5a15129d78b5e8dd5a7.1638402361.git.quic_vamslank@quicinc.com
2021-12-03 10:12:06 -06:00
Vamsi krishna Lanka
aa848c8ee8 dt-bindings: clock: Introduce RPMHCC bindings for SDX65
Add compatible for SDX65 RPMHCC.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/91c10dde568098027833dfcc310748a92a90387e.1638402361.git.quic_vamslank@quicinc.com
2021-12-03 10:12:06 -06:00
Daniel Scally
c097af1d0a device property: Check fwnode->secondary when finding properties
fwnode_property_get_reference_args() searches for named properties
against a fwnode_handle, but these could instead be against the fwnode's
secondary. If the property isn't found against the primary, check the
secondary to see if it's there instead.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20211128232455.39332-1-djrscally@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 16:42:43 +01:00
Ira Weiny
e1b5186810 Documentation/auxiliary_bus: Move the text into the code
The code and documentation are more difficult to maintain when kept
separately.  This is further compounded when the standard structure
documentation infrastructure is not used.

Move the documentation into the code, use the standard documentation
infrastructure, add current documented functions, and reference the text
in the rst file.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20211202044305.4006853-8-ira.weiny@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 16:41:50 +01:00
Ira Weiny
8a2d6ffe77 Documentation/auxiliary_bus: Clarify the release of devices from find device
auxiliary_find_device() takes a proper get_device() reference on the
device before returning the matched device.

Users of this call should be informed that they need to properly release
this reference with put_device().

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20211202044305.4006853-7-ira.weiny@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 16:41:50 +01:00
Ira Weiny
14866a7db8 Documentation/auxiliary_bus: Add example code for module_auxiliary_driver()
Add an example code snipit to the module_auxiliary_driver()
documentation which is consistent with the other example code in the
elsewhere in the documentation.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20211202044305.4006853-6-ira.weiny@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 16:41:50 +01:00
Ira Weiny
05021dca78 Documentation/auxiliary_bus: Clarify __auxiliary_driver_register
__auxiliary_driver_register is not intended to be called directly unless
a custom name is required.  Add documentation for this fact.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20211202044305.4006853-5-ira.weiny@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 16:41:50 +01:00
Ira Weiny
cb2ba75935 Documentation/auxiliary_bus: Update Auxiliary device lifespan
It was unclear when the auxiliary device objects were to be free'ed by
the parent (registering) driver.

Also there are some patterns like using devm_add_action_or_reset() which
are helpful to mention to those using the interface to ensure they don't
double free or miss freeing the auxiliary devices.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20211202044305.4006853-4-ira.weiny@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 16:41:50 +01:00
Ira Weiny
0d058a206a Documentation/auxiliary_bus: Clarify match_name
Provide example code for how the match name is formed and where it is
supposed to be set.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20211202044305.4006853-3-ira.weiny@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 16:41:50 +01:00
Ira Weiny
b247703873 Documentation/auxiliary_bus: Clarify auxiliary_device creation
The documentation for creating an auxiliary device is a 3 step not a 2
step process.  Specifically the requirements of setting the name, id,
dev.release, and dev.parent fields was not clear as a precursor to the '2
step' process documented.

Clarify by declaring this a 3 step process starting with setting the
fields of struct auxiliary_device correctly.

Also add some sample code and tie the change into the rest of the
documentation.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20211202044305.4006853-2-ira.weiny@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 16:41:50 +01:00
Abhyuday Godhasara
70602b37c4 driver: soc: xilinx: register for power events in zynqmp power driver
With Xilinx Event Management driver, all types of events like power and
error gets handled from single place as part of event management driver.

So power events(SUSPEND_POWER_REQUEST and SUSPEND_SYSTEM_SHUTDOWN)
also gets handled by event management driver instead of zynqmp_power
driver.

zynqmp-power driver use event management driver and provide callback
function for Suspend and shutdown handler, which will be called by event
management driver when respective event is arrived.

If event management driver is not available than use ipi-mailbox rx channel
or IPI interrupt IRQ handler for power events (suspend/shutdown) same as
current zynqmp-power driver.

Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20211129070216.30253-4-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 16:08:46 +01:00
Abhyuday Godhasara
a515814e74 firmware: xilinx: instantiate xilinx event manager driver
Register simple platform device to instantiate Xilinx event
manager driver.

Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20211129070216.30253-3-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 16:08:46 +01:00
Abhyuday Godhasara
c7fdb2404f drivers: soc: xilinx: add xilinx event management driver
Xilinx event management driver provides an interface to subscribe or
unsubscribe for the event/callback supported by firmware. An agent can use
this driver to register for Error Event, Device Event and Suspend callback.
This driver only allows one agent per event to do registration. Driver will
return an error in case of multiple registration for the same event.

This driver gets notification from firmware through TF-A as SGI. During
initialization, event manager driver register handler for SGI used for
notification. It also provides SGI number info to TF-A by using
IOCTL_REGISTER_SGI call to TF-A.

After receiving notification from firmware, the driver makes an SMC call to
TF-A to get IPI data. From the IPI data provided by TF-A, event manager
identified the cause of event and forward that event/callback notification
to the respective subscribed driver. After this, in case of Error Event,
driver performs unregistration as firmware expecting from agent to do
re-registration if the agent wants to get notified on the second occurrence
of an error event.

Add new IOCTL id IOCTL_REGISTER_SGI = 25 which is used to register SGI on
TF-A.

Older firmware doesn't have all required support for event handling which
is required by the event manager driver. So add check for the register
notifier version in the event manager driver.

Xilinx event management driver provides support to subscribe for multiple
error events with the use of Event Mask in a single call of
xlnx_register_event(). Agent driver can provide 'Event' parameter value as
ORed of multiple event masks to register single callback for multiple
events. For example, to register callback for event=0x1 and event=0x2 for
the given node, agent can provide event=0x3 (0x1 | 0x2). It is not possible
to register multiple events for different nodes in a single registration
call.

Also provide support to receive multiple error events as in single
notification from firmware and then forward it to subscribed drivers via
registered callback one by one.

Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20211129070216.30253-2-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 16:08:46 +01:00
Srinivas Kandagatla
8619225103 nvmem: core: set size for sysfs bin file
For some reason we never set the size for nvmem sysfs binary file.
Set this.

Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130133909.6154-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 16:03:37 +01:00
Cai Huoqing
13a5fad39a tty: mips_ejtag_fdc: Make use of the helper function kthread_run_on_cpu()
Replace kthread_create/kthread_bind/wake_up_process() with
kthread_run_on_cpu() to simplify the code.

Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/r/20211202140737.94832-1-cai.huoqing@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 16:00:41 +01:00
Rob Herring
e320d9c2e9 gpio: xlp: Fix build errors from Netlogic XLP removal
Commit ea708ac5bf ("gpio: xlp: Remove Netlogic XLP variants") has
build errors with CONFIG_ACPI:

drivers/gpio/gpio-xlp.c:300:23: error: 'GPIO_VARIANT_VULCAN' undeclared here (not in a function)

and !CONFIG_OF:

drivers/gpio/gpio-xlp.c:267:11: error: 'struct gpio_chip' has no member named 'of_node'

Fix these errors.

Fixes: ea708ac5bf ("gpio: xlp: Remove Netlogic XLP variants")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-12-03 16:00:40 +01:00
John Keeping
adc8b4bf2a gpio: rockchip: lock GPIOs used as interrupts
Use the standard gpiochip request/release resource functions so that any
GPIOs used as interrupts are properly locked.  This allows libgpiod to
correctly show these GPIOs as in-use.

Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-12-03 15:59:10 +01:00
Heiko Carstens
f1045056c7 topology/sysfs: rework book and drawer topology ifdefery
Provide default defines for the topology_book_[id|cpumask] and
topology_drawer_[id|cpumask] macros just like for each other topology
level.
This way all topology levels are handled in a similar way. Still the
the book and drawer levels are only used on s390, and also the sysfs
attributes are only created on s390. However other architectures may
opt in if wanted.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20211129130309.3256168-4-hca@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 15:58:27 +01:00
Heiko Carstens
e795707703 topology/sysfs: export cluster attributes only if an architectures has support
The cluster_id and cluster_cpus topology sysfs attributes have been
added with commit c5e22feffd ("topology: Represent clusters of CPUs
within a die").

They are currently only used for x86, arm64, and riscv (via generic
arch topology), however they are still present with bogus default
values for all other architectures. Instead of enforcing such new
sysfs attributes to all architectures, make them only optional visible
if an architecture opts in by defining both the topology_cluster_id
and topology_cluster_cpumask attributes.

This is similar to what was done when the book and drawer topology
levels were introduced: avoid useless and therefore confusing sysfs
attributes for architectures which cannot make use of them.

This should not break any existing applications, since this is a
new interface introduced with the v5.16 merge window.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20211129130309.3256168-3-hca@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 15:58:27 +01:00
Heiko Carstens
2c4dcd7fd5 topology/sysfs: export die attributes only if an architectures has support
The die_id and die_cpus topology sysfs attributes have been added with
commit 0e344d8c70 ("cpu/topology: Export die_id") and commit
2e4c54dac7 ("topology: Create core_cpus and die_cpus sysfs attributes").

While they are currently only used and useful for x86 they are still
present with bogus default values for all architectures. Instead of
enforcing such new sysfs attributes to all architectures, make them
only optional visible if an architecture opts in by defining both the
topology_die_id and topology_die_cpumask attributes.

This is similar to what was done when the book and drawer topology
levels were introduced: avoid useless and therefore confusing sysfs
attributes for architectures which cannot make use of them.

This should not break any existing applications, since this is a
rather new interface and applications should be able to handle also
older kernel versions without such attributes - besides that they
contain only useful information for x86.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20211129130309.3256168-2-hca@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 15:58:27 +01:00
Geert Uytterhoeven
a00128dfc8 gpio: aggregator: Add interrupt support
Currently the GPIO Aggregator does not support interrupts.  This means
that kernel drivers going from a GPIO to an IRQ using gpiod_to_irq(),
and userspace applications using line events do not work.

Add interrupt support by providing a gpio_chip.to_irq() callback, which
just calls into the parent GPIO controller.

Note that this does not implement full interrupt controller (irq_chip)
support, so using e.g. gpio-keys with "interrupts" instead of "gpios"
still does not work.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-12-03 15:54:31 +01:00
Geert Uytterhoeven
49fdfe6640 gpiolib: Let gpiod_add_lookup_table() call gpiod_add_lookup_tables()
This saves 20 bytes on arm32, and 44 bytes on arm64.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-12-03 15:47:16 +01:00
Dan Carpenter
badd7857f5 net: altera: set a couple error code in probe()
There are two error paths which accidentally return success instead of
a negative error code.

Fixes: bbd2190ce9 ("Altera TSE: Add main and header file for Altera Ethernet Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 14:23:11 +00:00
Dan Carpenter
bb14bfc7eb net: lan966x: fix a IS_ERR() vs NULL check in lan966x_create_targets()
The devm_ioremap() function does not return error pointers.  It returns
NULL.

Fixes: db8bcaad53 ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 14:22:00 +00:00
Yang Yingliang
f6882b8fac net: prestera: acl: fix return value check in prestera_acl_rule_entry_find()
rhashtable_lookup_fast() returns NULL pointer not ERR_PTR().
Return rhashtable_lookup_fast() directly to fix this.

Fixes: 47327e198d ("net: prestera: acl: migrate to new vTCAM api")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 14:19:54 +00:00
Jiasheng Jiang
128f6ec95a net: bcm4908: Handle dma_set_coherent_mask error codes
The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.

Fixes: 9d61d138ab ("net: broadcom: rename BCM4908 driver & update DT binding")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 14:18:53 +00:00
Li Zhijian
0f8a3b48f9 selftests: net/fcnal-test.sh: add exit code
Previously, the selftest framework always treats it as *ok* even though
some of them are failed actually. That's because the script always
returns 0.

It supports PASS/FAIL/SKIP exit code now.

CC: Philip Li <philip.li@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 14:17:34 +00:00
Eric Dumazet
dac8e00fb6 bonding: make tx_rebalance_counter an atomic
KCSAN reported a data-race [1] around tx_rebalance_counter
which can be accessed from different contexts, without
the protection of a lock/mutex.

[1]
BUG: KCSAN: data-race in bond_alb_init_slave / bond_alb_monitor

write to 0xffff888157e8ca24 of 4 bytes by task 7075 on cpu 0:
 bond_alb_init_slave+0x713/0x860 drivers/net/bonding/bond_alb.c:1613
 bond_enslave+0xd94/0x3010 drivers/net/bonding/bond_main.c:1949
 do_set_master net/core/rtnetlink.c:2521 [inline]
 __rtnl_newlink net/core/rtnetlink.c:3475 [inline]
 rtnl_newlink+0x1298/0x13b0 net/core/rtnetlink.c:3506
 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571
 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2491
 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x6e1/0x7d0 net/netlink/af_netlink.c:1916
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg net/socket.c:724 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2409
 ___sys_sendmsg net/socket.c:2463 [inline]
 __sys_sendmsg+0x195/0x230 net/socket.c:2492
 __do_sys_sendmsg net/socket.c:2501 [inline]
 __se_sys_sendmsg net/socket.c:2499 [inline]
 __x64_sys_sendmsg+0x42/0x50 net/socket.c:2499
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888157e8ca24 of 4 bytes by task 1082 on cpu 1:
 bond_alb_monitor+0x8f/0xc00 drivers/net/bonding/bond_alb.c:1511
 process_one_work+0x3fc/0x980 kernel/workqueue.c:2298
 worker_thread+0x616/0xa70 kernel/workqueue.c:2445
 kthread+0x2c7/0x2e0 kernel/kthread.c:327
 ret_from_fork+0x1f/0x30

value changed: 0x00000001 -> 0x00000064

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 1082 Comm: kworker/u4:3 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: bond1 bond_alb_monitor

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 14:16:48 +00:00
Abdun Nihaal
c601ab0eb4 staging: r8188eu: Fix coding style error
Move opening brace to next line to conform to kernel coding style.

Fixes the following checkpatch error:
ERROR: open brace '{' following function definitions go on the next line

Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Link: https://lore.kernel.org/r/20211201153039.305245-1-abdun.nihaal@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 15:15:54 +01:00
Eric Dumazet
03cfda4fa6 tcp: fix another uninit-value (sk_rx_queue_mapping)
KMSAN is still not happy [1].

I missed that passive connections do not inherit their
sk_rx_queue_mapping values from the request socket,
but instead tcp_child_process() is calling
sk_mark_napi_id(child, skb)

We have many sk_mark_napi_id() callers, so I am providing
a new helper, forcing the setting sk_rx_queue_mapping
and sk_napi_id.

Note that we had no KMSAN report for sk_napi_id because
passive connections got a copy of this field from the listener.
sk_rx_queue_mapping in the other hand is inside the
sk_dontcopy_begin/sk_dontcopy_end so sk_clone_lock()
leaves this field uninitialized.

We might remove dead code populating req->sk_rx_queue_mapping
in the future.

[1]

BUG: KMSAN: uninit-value in __sk_rx_queue_set include/net/sock.h:1924 [inline]
BUG: KMSAN: uninit-value in sk_rx_queue_update include/net/sock.h:1938 [inline]
BUG: KMSAN: uninit-value in sk_mark_napi_id include/net/busy_poll.h:136 [inline]
BUG: KMSAN: uninit-value in tcp_child_process+0xb42/0x1050 net/ipv4/tcp_minisocks.c:833
 __sk_rx_queue_set include/net/sock.h:1924 [inline]
 sk_rx_queue_update include/net/sock.h:1938 [inline]
 sk_mark_napi_id include/net/busy_poll.h:136 [inline]
 tcp_child_process+0xb42/0x1050 net/ipv4/tcp_minisocks.c:833
 tcp_v4_rcv+0x3d83/0x4ed0 net/ipv4/tcp_ipv4.c:2066
 ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204
 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252
 dst_input include/net/dst.h:460 [inline]
 ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline]
 ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline]
 ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609
 ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644
 __netif_receive_skb_list_ptype net/core/dev.c:5505 [inline]
 __netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553
 __netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605
 netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696
 gro_normal_list net/core/dev.c:5850 [inline]
 napi_complete_done+0x579/0xdd0 net/core/dev.c:6587
 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline]
 virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557
 __napi_poll+0x14e/0xbc0 net/core/dev.c:7020
 napi_poll net/core/dev.c:7087 [inline]
 net_rx_action+0x824/0x1880 net/core/dev.c:7174
 __do_softirq+0x1fe/0x7eb kernel/softirq.c:558
 run_ksoftirqd+0x33/0x50 kernel/softirq.c:920
 smpboot_thread_fn+0x616/0xbf0 kernel/smpboot.c:164
 kthread+0x721/0x850 kernel/kthread.c:327
 ret_from_fork+0x1f/0x30

Uninit was created at:
 __alloc_pages+0xbc7/0x10a0 mm/page_alloc.c:5409
 alloc_pages+0x8a5/0xb80
 alloc_slab_page mm/slub.c:1810 [inline]
 allocate_slab+0x287/0x1c20 mm/slub.c:1947
 new_slab mm/slub.c:2010 [inline]
 ___slab_alloc+0xbdf/0x1e90 mm/slub.c:3039
 __slab_alloc mm/slub.c:3126 [inline]
 slab_alloc_node mm/slub.c:3217 [inline]
 slab_alloc mm/slub.c:3259 [inline]
 kmem_cache_alloc+0xbb3/0x11c0 mm/slub.c:3264
 sk_prot_alloc+0xeb/0x570 net/core/sock.c:1914
 sk_clone_lock+0xd6/0x1940 net/core/sock.c:2118
 inet_csk_clone_lock+0x8d/0x6a0 net/ipv4/inet_connection_sock.c:956
 tcp_create_openreq_child+0xb1/0x1ef0 net/ipv4/tcp_minisocks.c:453
 tcp_v4_syn_recv_sock+0x268/0x2710 net/ipv4/tcp_ipv4.c:1563
 tcp_check_req+0x207c/0x2a30 net/ipv4/tcp_minisocks.c:765
 tcp_v4_rcv+0x36f5/0x4ed0 net/ipv4/tcp_ipv4.c:2047
 ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204
 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252
 dst_input include/net/dst.h:460 [inline]
 ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline]
 ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline]
 ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609
 ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644
 __netif_receive_skb_list_ptype net/core/dev.c:5505 [inline]
 __netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553
 __netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605
 netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696
 gro_normal_list net/core/dev.c:5850 [inline]
 napi_complete_done+0x579/0xdd0 net/core/dev.c:6587
 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline]
 virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557
 __napi_poll+0x14e/0xbc0 net/core/dev.c:7020
 napi_poll net/core/dev.c:7087 [inline]
 net_rx_action+0x824/0x1880 net/core/dev.c:7174
 __do_softirq+0x1fe/0x7eb kernel/softirq.c:558

Fixes: 342159ee39 ("net: avoid dirtying sk->sk_rx_queue_mapping")
Fixes: a37a0ee4d2 ("net: avoid uninit-value from tcp_conn_request")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Tested-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 14:15:49 +00:00
Michael Straube
7fb6aea9ca staging: r8188eu: pNumRxBytesUnicast is set but never used
pNumRxBytesUnicast in odm_dm_struct is set but never used.
Remove it.

Acked-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211202192309.9362-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 15:15:25 +01:00
Michael Straube
85d8264d9d staging: r8188eu: pNumTxBytesUnicast is set but never used
pNumTxBytesUnicast in odm_dm_struct is set but never used.
Remove it.

Acked-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211202192309.9362-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 15:15:24 +01:00
Michael Straube
bbd11e051e staging: r8188eu: pSecurity is set but never used
pSecurity in odm_dm_struct is set but never used. Remove it.

Acked-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211202192309.9362-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 15:15:24 +01:00
Michael Straube
993c689df5 staging: r8188eu: pbNet_closed is set but never used
pbNet_closed in odm_dm_struct is set but never used. Remove it.

Acked-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211202192309.9362-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 15:15:24 +01:00
Michael Straube
28478b06ac staging: r8188eu: remove unused variables from odm_dm_struct
There are many unused variables in the odm_dm_struct structure.
Remove them.

Acked-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211202192309.9362-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 15:15:24 +01:00
Eric Dumazet
a941892455 inet: use #ifdef CONFIG_SOCK_RX_QUEUE_MAPPING consistently
Since commit 4e1beecc3b ("net/sock: Add kernel config
SOCK_RX_QUEUE_MAPPING"),
sk_rx_queue_mapping access is guarded by CONFIG_SOCK_RX_QUEUE_MAPPING.

Fixes: 54b92e8419 ("tcp: Migrate TCP_ESTABLISHED/TCP_SYN_RECV sockets in accept queues.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03 14:15:07 +00:00
Michael Straube
55c5780679 staging: r8188eu: RFType is set but never used
RFType is set but never used. Remove it from struct HAL_VERSION and
remove the now unused enum HAL_RF_TYPE.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211129230125.27247-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 15:14:58 +01:00
Martin Kaiser
d7f79cdfe0 staging: r8188eu: use a delayed worker for led updates
The led layer uses a combination of timer and worker for periodic led
updates, e.g. for blinking. The reason seems to be that blocking
operations like a usb read are not allowed in a timer handler.

Replace the combination of timer and worker with a delayed worker.

Convert the timeout defines from milliseconds to jiffies to make them
usable as delays for the delayed worker. Shorten the names of the defines
and rename the work item to make checkpatch happy.

Other layers may call SwLedControlMode1 to update the led state. Such
an update may result in cancelling the delayed worker. SwLedControlMode1
might be called in interrupt context, we must use cancel_delayed_work to
cancel the worker. cancel_delayed_work_sync waits until the worker is
finished, this is not allowed in interrupt context.

DeInitLed871x is called when the driver is removed or when the system
goes into standby. We may use cancel_delayed_work_sync here to cancel
the delayed worker.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211126114135.18228-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 15:14:41 +01:00
Phillip Potter
505cf65638 staging: r8188eu: remove DBG_88E_LEVEL macro from include/rtw_debug.h
Remove the DBG_88E_LEVEL macro definition from include/rtw_debug.h, as
it has no callers and is surplus to requirements. This is motivated by
ongoing efforts to remove all non-standard debugging code from the
driver.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20211129002041.865-8-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 15:13:50 +01:00