If an load_nls_xxx() function fails a few lines above, the 'sbi->bdi_id' is
still 0.
So, in the error handling path, we will call ida_simple_remove(..., 0)
which is not allocated yet.
In order to prevent a spurious "ida_free called for id=0 which is not
allocated." message, tweak the error handling path and add a new label.
Fixes: 0fd1695766 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d09eaaa4e2e08206c58a1a27ca9b3e81dc168773.1698835730.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The SVE register sets have two different formats, one of which is a wrapped
version of the standard FPSIMD register set and another with actual SVE
register data. At present we check TIF_SVE to see if full SVE register
state should be provided when reading the SVE regset but if we were in a
syscall we may have saved only floating point registers even though that is
set.
Fix this and simplify the logic by checking and using the format which we
recorded when deciding if we should use FPSIMD or SVE format.
Fixes: 8c845e2731 ("arm64/sve: Leave SVE enabled on syscall if we don't context switch")
Cc: <stable@vger.kernel.org> # 6.2.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240325-arm64-ptrace-fp-type-v1-1-8dc846caf11f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The variable out_len is being used to accumulate the number of
bytes but it is not being used for any other purpose. The variable
is redundant and can be removed.
Cleans up clang scan build warning:
fs/vboxsf/utils.c:443:9: warning: variable 'out_len' set but not
used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240229225138.351909-1-colin.i.king@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The MST code currently assumes that glk+ already supports MST+DSC,
which is incorrect. We need to check for TGL+ actually. ICL does
support SST+DSC, but supposedly it can't do MST+FEC which will
also rule out MST+DSC.
Note that a straight TGL+ check doesn't work here because DSC
support can get fused out, so we do need to also check 'has_dsc'.
Cc: stable@vger.kernel.org
Fixes: d51f25eb47 ("drm/i915: Add DSC support to MST path")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-6-ville.syrjala@linux.intel.com
We never set connector->doublescan_allowed, so the probe helper
already filters out all doublescan modes for us.
Sadly we still need to keep the explicit doublescan checks
in .compute_config as outlined in commit e4dd27aadd
("drm/i915: Allow DBLSCAN user modes with eDP/LVDS/DSI")
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-2-ville.syrjala@linux.intel.com
Regular expression used to match the unit address part should not allow
non-hex numbers. Expect at least one hex digit as well.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240325104833.33372-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Regular expression used to match the unit address part should not allow
non-hex numbers.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240325104833.33372-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
TI Davinci remoteproc bindings were marked as work-in-progress /
unstable in 2017 in commit ae67b80078 ("dt-bindings: remoteproc: Add
bindings for Davinci DSP processors"). Almost seven years is enough, so
drop the "unstable" remark and expect usual ABI rules.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240224091236.10146-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Several TI SoC clock bindings were marked as work-in-progress / unstable
between 2013-2016, for example in commit f60b1ea5ea ("CLK: TI: add
support for gate clock"). It was enough of time to consider them stable
and expect usual ABI rules.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240224091236.10146-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Keystone clock controller bindings were marked as work-in-progress /
unstable in 2013 in commit b9e0d40c0d ("clk: keystone: add Keystone
PLL clock driver") and commit 7affe5685c ("clk: keystone: Add gate
control clock driver") Almost eleven years is enough, so drop the
"unstable" remark and expect usual ABI rules.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240224091236.10146-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Align system call table on 8 bytes. With sys_call_table entry size
of 8 bytes that eliminates the possibility of a system call pointer
crossing cache line boundary.
Cc: stable@kernel.org
Suggested-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In case of a sampling event, the PAI PMU device drivers need a
reference to this event. Currently to PMU device driver reference
is removed when a sampling event is destroyed. This may lead to
situations where the reference of the PMU device driver is removed
while being used by a different sampling event.
Reset the event reference pointer of the PMU device driver when
a sampling event is deleted and before the next one might be added.
Fixes: 39d62336f5 ("s390/pai: add support for cryptography counters")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
preempt_count-related functions are quite ubiquitous and may be called
by noinstr ones, introducing unwanted instrumentation. Here is one
example call chain:
irqentry_nmi_enter() # noinstr
lockdep_hardirqs_enabled()
this_cpu_read()
__pcpu_size_call_return()
this_cpu_read_*()
this_cpu_generic_read()
__this_cpu_generic_read_nopreempt()
preempt_disable_notrace()
__preempt_count_inc()
__preempt_count_add()
They are very small, so there are no significant downsides to
force-inlining them.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20240320230007.4782-3-iii@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Atomic functions are quite ubiquitous and may be called by noinstr
ones, introducing unwanted instrumentation. They are very small, so
there are no significant downsides to force-inlining them.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20240320230007.4782-2-iii@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The recently added check to figure out if a fault happened on gmap ASCE
dereferences the gmap pointer in lowcore without checking that it is not
NULL. For all non-KVM processes the pointer is NULL, so that some value
from lowcore will be read. With the current layouts of struct gmap and
struct lowcore the read value (aka ASCE) is zero, so that this doesn't lead
to any observable bug; at least currently.
Fix this by adding the missing NULL pointer check.
Fixes: 64c3431808 ("s390/entry: compare gmap asce to determine guest/host fault")
Acked-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
can1_lpcg: clock-controller@5ace0000 {
... Col1 Col2
clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>,// 0 0
<&dma_ipg_clk>, // 1 4
<&dma_ipg_clk>; // 2 5
clock-indices = <IMX_LPCG_CLK_0>,
<IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver
&flexcan2 {
clocks = <&can1_lpcg 1>, <&can1_lpcg 0>;
^^ ^^
Should be:
clocks = <&can1_lpcg IMX_LPCG_CLK_4>, <&can1_lpcg IMX_LPCG_CLK_0>;
};
Arg0 is divided by 4 in lpcg driver. So flexcan get IMX_SC_PM_CLK_PER by
<&can1_lpcg 1> and <&can1_lpcg 0>. Although function work, code logic is
wrong. Fix it by using correct clock indices.
Cc: stable@vger.kernel.org
Fixes: be85831de0 ("arm64: dts: imx8qm: add can node in devicetree")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
adma_pwm_lpcg: clock-controller@5a590000 {
... col1 col2
clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>,// 0 0
<&dma_ipg_clk>; // 1 4
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
adma_pwm: pwm@5a190000 {
...
clocks = <&adma_pwm_lpcg 1>, <&adma_pwm_lpcg 0>;
^^ ^^
Should be
clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
<&adma_pwm_lpcg IMX_LPCG_CLK_0>;
};
Arg0 will be divided by 4 in lcpg driver, so pwm will get IMX_SC_PM_CLK_PER
by <&adma_pwm_lpcg 1>, <&adma_pwm_lpcg 0>. Although function can work, code
logic is wrong. Fix it by use correct indices.
Cc: stable@vger.kernel.org
Fixes: f1d6a6b991 ("arm64: dts: imx8qxp: add adma_pwm in adma")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
lpcg's arg0 should use clock indices instead of index.
pwm0_lpcg: clock-controller@5d400000 {
... // Col1 Col2
clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 0 0
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 1 1
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, // 2 4
<&lsio_bus_clk>, // 3 5
<&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; // 4 6
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
<IMX_LPCG_CLK_6>;
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
pwm1 {
....
clocks = <&pwm1_lpcg 4>, <&pwm1_lpcg 1>;
^^ ^^
should be:
clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>, <&pwm1_lpcg IMX_LPCG_CLK_1>;
};
Arg0 is divided by 4 in lpcg driver, so index 0 and 1 will be get by pwm
driver, which are same as IMX_LPCG_CLK_6 and IMX_LPCG_CLK_1. Even it can
work, but code logic is wrong. Fixed it by use correct indices.
Cc: stable@vger.kernel.org
Fixes: 23fa99b205 ("arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In af93a167ed, i2c_hid_parse was changed to continue with reading the
report descriptor before waiting for reset to be acknowledged.
This has lead to two regressions:
1. We fail to handle reset acknowledgment if it happens while reading
the report descriptor. The transfer sets I2C_HID_READ_PENDING, which
causes the IRQ handler to return without doing anything.
This affects both a Wacom touchscreen and a Sensel touchpad.
2. On a Sensel touchpad, reading the report descriptor this quickly
after reset results in all zeroes or partial zeroes.
The issues were observed on the Lenovo Thinkpad Z16 Gen 2.
The change in question was made based on a Microsoft article[0] stating
that Windows 8 *may* read the report descriptor in parallel with
awaiting reset acknowledgment, intended as a slight reset performance
optimization. Perhaps they only do this if reset is not completing
quickly enough for their tastes?
As the code is not currently ready to read registers in parallel with a
pending reset acknowledgment, and as reading quickly breaks the report
descriptor on the Sensel touchpad, revert to waiting for reset
acknowledgment before proceeding to read the report descriptor.
[0]: https://learn.microsoft.com/en-us/windows-hardware/drivers/hid/plug-and-play-support-and-power-management
Fixes: af93a167ed ("HID: i2c-hid: Move i2c_hid_finish_hwreset() to after reading the report-descriptor")
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2271136
Cc: stable@vger.kernel.org
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Link: https://lore.kernel.org/r/20240331182440.14477-1-kl@kl.wtf
[hdegoede@redhat.com Drop no longer necessary abort_reset error exit path]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch is regarding the recent addition of support for the NSO
controllers to hid-nintendo. All controllers are working correctly with the
exception of the N64 controller, which is being identified as a mouse by
udev. This results in the joystick controlling the mouse cursor and the
controller not being detected by games.
The reason for this is because the N64's C buttons have been attributed to
BTN_FORWARD, BTN_BACK, BTN_LEFT, BTN_RIGHT, which are buttons typically
attributed to mice.
This patch changes those buttons to controller buttons, making the
controller be correctly identified as such.
Signed-off-by: Nuno Pereira <nf.pereira@outlook.pt>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When a gpiochip gets added by loading a module, then another driver may
be waiting for that gpiochip to load on the deferred-probe list.
If the deferred-probe for the consumer of gpiochip then triggers between
the gpiodev_add_to_list_unlocked() calls which makes gpio_device_find()
see the chip and the gpiochip_setup_dev() later then gpio_device_find()
does a kobject_get() on an uninitialized kobject since the kobject is
initialized by gpiochip_setup_dev() calling device_initialize():
arizona spi-10WM5102:00: cannot find GPIO chip arizona, deferring
arizona spi-10WM5102:00: cannot find GPIO chip arizona, deferring
------------[ cut here ]------------
kobject: 'gpiochip5' (00000000241466f2): is not initialized, yet kobject_get() is being called.
WARNING: CPU: 3 PID: 42 at lib/kobject.c:640 kobject_get+0x43/0x70
Call Trace:
kobject_get
gpio_device_find
gpiod_find_and_request
gpiod_get
snd_byt_wm5102_mc_probe
Not only is the device not initialized yet, but when the gpio-device is
added to the list things like the irqchip also have not been initialized
yet.
So gpio_device_find() should really ignore the gpio-device until
gpiochip_add_data_with_key() is fully done. Add a device_is_registered()
check to gpio_device_find() to ignore gpio-devices on the list which are
not yet fully initialized.
Fixes: aab5c6f200 ("gpio: set device type for GPIO chips")
Suggested-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
[Bartosz: fix a typo in commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If the RBUF logic is not reset when the kernel starts then there
may be some data left over from any network boot loader. If the
64-byte packet headers are enabled then this can be fatal.
Extend bcmgenet_dma_disable to do perform the reset, but not when
called from bcmgenet_resume in order to preserve a wake packet.
N.B. This different handling of resume is just based on a hunch -
why else wouldn't one reset the RBUF as well as the TBUF? If this
isn't the case then it's easy to change the patch to make the RBUF
reset unconditional.
See: https://github.com/raspberrypi/linux/issues/3850
See: https://github.com/raspberrypi/firmware/issues/1882
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Maarten Vanraes <maarten@rmail.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
In function pci1xxxx_spi_probe, there is a potential null pointer that
may be caused by a failed memory allocation by the function devm_kzalloc.
Hence, a null pointer check needs to be added to prevent null pointer
dereferencing later in the code.
To fix this issue, spi_bus->spi_int[iter] should be checked. The memory
allocated by devm_kzalloc will be automatically released, so just directly
return -ENOMEM without worrying about memory leaks.
Fixes: 1cc0cbea71 ("spi: microchip: pci1xxxx: Add driver for SPI controller of PCI1XXXX PCIe switch")
Signed-off-by: Huai-Yuan Liu <qq810974084@gmail.com>
Link: https://msgid.link/r/20240403014221.969801-1-qq810974084@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_spi_alloc_controller will allocate an SPI controller and
automatically release a reference on it when dev is unbound from
its driver. It doesn't need to call spi_controller_put explicitly
to put the reference when lpspi driver failed initialization.
Fixes: 2ae0ab0143 ("spi: lpspi: Avoid potential use-after-free in probe()")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://msgid.link/r/20240403084029.2000544-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In rvu_map_cgx_lmac_pf() the 'iter', which is used as an array index, can reach
value (up to 14) that exceed the size (MAX_LMAC_COUNT = 8) of the array.
Fix this bug by adding 'iter' value check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 91c6945ea1 ("octeontx2-af: cn10k: Add RPM MAC support")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MSR_PEBS_DATA_CFG MSR register is used to configure which data groups
should be generated into a PEBS record, and it's shared among all counters.
If there are different configurations among counters, perf combines all the
configurations.
The first perf command as below requires a complete PEBS record
(including memory info, GPRs, XMMs, and LBRs). The second perf command
only requires a basic group. However, after the second perf command is
running, the MSR_PEBS_DATA_CFG register is cleared. Only a basic group is
generated in a PEBS record, which is wrong. The required information
for the first perf command is missed.
$ perf record --intr-regs=AX,SP,XMM0 -a -C 8 -b -W -d -c 100000003 -o /dev/null -e cpu/event=0xd0,umask=0x81/upp &
$ sleep 5
$ perf record --per-thread -c 1 -e cycles:pp --no-timestamp --no-tid taskset -c 8 ./noploop 1000
The first PEBS event is a system-wide PEBS event. The second PEBS event
is a per-thread event. When the thread is scheduled out, the
intel_pmu_pebs_del() function is invoked to update the PEBS state.
Since the system-wide event is still available, the cpuc->n_pebs is 1.
The cpuc->pebs_data_cfg is cleared. The data configuration for the
system-wide PEBS event is lost.
The (cpuc->n_pebs == 1) check was introduced in commit:
b6a32f023f ("perf/x86: Fix PEBS threshold initialization")
At that time, it indeed didn't hurt whether the state was updated
during the removal, because only the threshold is updated.
The calculation of the threshold takes the last PEBS event into
account.
However, since commit:
b752ea0c28 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG")
we delay the threshold update, and clear the PEBS data config, which triggers
the bug.
The PEBS data config update scope should not be shrunk during removal.
[ mingo: Improved the changelog & comments. ]
Fixes: b752ea0c28 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240401133320.703971-1-kan.liang@linux.intel.com
Binding doesn't specify "reset-names" property and Linux driver also
doesn't use it.
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: thermal@1100b000: Unevaluated properties are not allowed ('reset-names' was unexpected)
from schema $id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
Fixes: ae457b7679 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-5-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: ethernet@1b100000: compatible: ['mediatek,mt7622-eth', 'mediatek,mt2701-eth', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/net/mediatek,net.yaml#
(and other complains about wrong clocks).
Fixes: 5f599b3a0b ("arm64: dts: mt7622: add ethernet device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-4-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: cir@10009000: $nodename:0: 'cir@10009000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$'
from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml#
Fixes: ae457b7679 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-3-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The requested voltage could be lower than the minimum voltage on the
GPU OPP table when the MTK Smart Voltage Scaling (SVS) driver is
enabled, so update the minimum voltage constraint from 600000 uV to
500000 uV as listed on the mt6366 datasheet.
Fixes: 8855d01fb8 ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-5-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The requested voltage could be lower than the minimum voltage on the
GPU OPP table when the MTK Smart Voltage Scaling (SVS) driver is
enabled, so removing the definition in mt8183-kukui to use the default
minimum voltage (500000 uV) defined in mt6358.dtsi.
Fixes: 31c6732da9 ("arm64: dts: mediatek: mt8183-kukui: Override vgpu/vsram_gpu constraints")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-4-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Update the minimum voltage from 300000 uV to 400000 uV so it matches
the MT6315 datasheet.
Also update the minimum voltage for Vgpu regulator from 625000 uV to
400000 uV because the requested voltage could be lower than the minimum
voltage on the GPU OPP table when the MTK Smart Voltage Scaling (SVS)
driver is enabled.
Fixes: 260c04d425 ("arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-3-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Update the minimum voltage from 300000 uV to 400000 uV so it matches
the MT6315 datasheet.
Also update the minimum voltage for Vgpu regulator from 606250 uV to
400000 uV because the requested voltage could be lower than the minimum
voltage on the GPU OPP table when the MTK Smart Voltage Scaling (SVS)
driver is enabled.
Fixes: 3183cb62b0 ("arm64: dts: mediatek: asurada: Add SPMI regulators")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-2-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Describe in each CPU node the regulator supplying it.
Fixes: 260c04d425 ("arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240110142305.755367-2-nfraprado@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the missing mediatek,gce-client-reg property to the mutex1 node to
allow it to use the GCE. This prevents the "can't parse gce-client-reg
property" error from being printed and should result in better
performance.
Fixes: 92d2c23dc2 ("arm64: dts: mt8195: add display node for vdosys1")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-4-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the missing mediatek,gce-client-reg property to the mutex node to
allow it to use the GCE. This prevents the "can't parse gce-client-reg
property" error from being printed and should result in better
performance.
Fixes: b852ee68fd ("arm64: dts: mt8195: Add display node for vdosys0")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-3-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the missing mediatek,gce-client-reg property to the vppsys and
vdosys nodes to allow them to use the GCE. This prevents the "can't
parse gce-client-reg property" error from being printed and should
result in better performance.
Fixes: 6aa5b46d17 ("arm64: dts: mt8195: Add vdosys and vppsys clock nodes")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-2-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the missing mediatek,gce-client-reg property to the mutex node to
allow it to use the GCE. This prevents the "can't parse gce-client-reg
property" error from being printed and should result in better
performance.
Fixes: b4b75bac95 ("arm64: dts: mt8192: Add display nodes")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-1-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
