It is incorrect to use devm-managed memory allocations for DRM data
structures exposed to userspace. They should use drmm_ allocations.
Change struct dpu_encoder allocation to use drmm_encoder_alloc(). This
removes the need to perform any actions on encoder destruction.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570053/
Link: https://lore.kernel.org/r/20231201211845.1026967-14-dmitry.baryshkov@linaro.org
Add Intel Meteor Lake-PS SoC compute die IDs for EDAC support.
These SoCs share similar IBECC registers with Alder Lake-P SoCs.
The only difference is that IBECC presence is detected through an
MMIO-mapped register instead of the capability register in the
PCI configuration space.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Add Intel Raptor Lake-P SoC compute die IDs for EDAC support.
These Raptor Lake-P SoCs share similar IBECC registers with Alder Lake-P
SoCs but extend the most significant bit of the error address logged
in IBECC from bit 38 to bit 45.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Add Intel Alder Lake-N SoC compute die IDs for EDAC support.
Alder Lake-N, with one memory controller, is a reduced version of
Alder Lake-P, which has two memory controllers.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Make get_mchbar() helper function to retrieve the BAR address of
the memory controller. No function changes.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
In __iavf_set_coalesce, the driver checks both ec->rx_coalesce_usecs and
ec->tx_coalesce_usecs for validity. It does this via a chain if if/else-if
blocks. If every single branch of the series of if statements exited, this
would be fine. However, the rx_coalesce_usecs is checked against zero to
print an informative message if use_adaptive_rx_coalesce is enabled. If
this check is true, it short circuits the entire chain of statements,
preventing validation of the tx_coalesce_usecs field.
Indeed, since commit e792779e6b ("iavf: Prevent changing static ITR
values if adaptive moderation is on") the iavf driver actually rejects any
change to the tx_coalesce_usecs or rx_coalesce_usecs when
use_adaptive_tx_coalesce or use_adaptive_rx_coalesce is enabled, making
this checking a bit redundant.
Fix this error by removing the unnecessary and redundant checks for
use_adaptive_rx_coalesce and use_adaptive_tx_coalesce. Since zero is a
valid value, and since the tx_coalesce_usecs and rx_coalesce_usecs fields
are already unsigned, remove the minimum value check. This allows assigning
an ITR value ranging from 0-8160 as described by the printed message.
Fixes: 65e87c0398 ("i40evf: support queue-specific settings for interrupt moderation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 3a2c6ced90 ("i40e: Add a check to see if MFS is set") added
a warning message that reports unexpected size of port's MFS (max
frame size) value. This message use for the port number local
variable 'i' that is wrong.
In i40e_probe() this 'i' variable is used only to iterate VSIs
to find FDIR VSI:
<code>
...
/* if FDIR VSI was set up, start it now */
for (i = 0; i < pf->num_alloc_vsi; i++) {
if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
i40e_vsi_open(pf->vsi[i]);
break;
}
}
...
</code>
So the warning message use for the port number index of FDIR VSI
if this exists or pf->num_alloc_vsi if not.
Fix the message by using 'pf->hw.port' for the port number.
Fixes: 3a2c6ced90 ("i40e: Add a check to see if MFS is set")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix setting dis_rx_filtering depending on whether port vlan is being
turned on or off. This was originally fixed in commit c793f8ea15 ("ice:
Fix disabling Rx VLAN filtering with port VLAN enabled"), but while
refactoring ice_vf_vsi_init_vlan_ops(), the fix has been lost. Restore the
fix along with the original comment from that change.
Also delete duplicate lines in ice_port_vlan_on().
Fixes: 2946204b3f ("ice: implement bridge port vlan")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
vfs::num_msix_per should be only used as default value for
vf->num_msix. For other use cases vf->num_msix should be used, as VF can
have different MSI-X amount values.
Fix incorrect register index calculation. vfs::num_msix_per and
pf->sriov_base_vector shouldn't be used after implementation of changing
MSI-X amount on VFs. Instead vf->first_vector_idx should be used, as it
is storing value for first irq index.
Fixes: fe1c5ca2fe ("ice: implement num_msix field per VF")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There is a spelling mistake in an option description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: https://lore.kernel.org/r/20230630080029.15614-1-colin.i.king@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are some old bug reports on perf diff crashing:
https://rhaas.blogspot.com/2012/06/perf-good-bad-ugly.html
Happening across them I was prompted to add two very basic tests that
will give some 'perf diff' coverage.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231120190408.281826-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The below error can be triggered on a hybrid machine.
$ perf mem record -t load sleep 1
event syntax error: 'breakpoint/mem-loads,ldlat=30/P'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'breakpoint'
In the perf_mem_events__record_args(), the current perf never checks the
availability of a mem event on a given PMU. All the PMUs will be added
to the perf mem event list. Perf errors out for the unsupported PMU.
Extend perf_mem_event__supported() and take a PMU into account. Check
the mem event for each PMU before adding it to the perf mem event list.
Optimize the perf_mem_events__init() a little bit. The function is to
check whether the mem events are supported in the system. It doesn't
need to scan all PMUs. Just return with the first supported PMU is good
enough.
Fixes: 5752c20f37 ("perf mem: Scan all PMUs instead of just core ones")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20231128203940.3964287-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running "perf list" on powerpc fails with segfault as below:
$ ./perf list
Segmentation fault (core dumped)
$
This happens because of duplicate events in the JSON list. The powerpc
JSON event list contains some event with same event name, but different
event code. They are:
- PM_INST_FROM_L3MISS (Present in datasource and frontend)
- PM_MRK_DATA_FROM_L2MISS (Present in datasource and marked)
- PM_MRK_INST_FROM_L3MISS (Present in datasource and marked)
- PM_MRK_DATA_FROM_L3MISS (Present in datasource and marked)
pmu_events_table__num_events() uses the value from table_pmu->num_entries
which includes duplicate events as well. This causes issue during "perf
list" and results in a segmentation fault.
Since both event codes are valid, append _DSRC to the Data Source events
(datasource.json), so that they would have a unique name.
Also add PM_DATA_FROM_L2MISS_DSRC and PM_DATA_FROM_L3MISS_DSRC events.
With the fix, 'perf list' works as expected.
Fixes: fc14358075 ("perf vendor events power10: Update JSON/events")
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123160110.94090-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test that JSON output produces valid JSON.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231129213428.2227448-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid replicated logic by having a common library to set the PYTHON
environment variable.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231129213428.2227448-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Migrate Makefile.tests to Build so that variables like rule_mkdir are
defined via Makefile.build (needed so the output directory can be
created). This requires SHELLCHECK being exported and the clean rule
tweaking to remove the files in find.
Change find "-perm -o=x" as it was failing on my Debian based Linux
kernel tree, switch to using "-executable".
Adding a filename prefix of "." to the shellcheck log files is a pain
and error prone in make, remove this prefix and just add the
shellcheck log files to .gitignore.
Fix the command echo so that running the test is displayed.
Fixes: 1638b11ef8 ("perf tools: Add perf binary dependent rule for shellcheck log in Makefile.perf")
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231129213428.2227448-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add JSON files for AmpereOneX core PMU events and metrics.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20231201021550.1109196-4-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The documentation wrongly called the event as BPU_FLUSH_MEM_FAULT and now
has been fixed. Correct the name in the perf tool as well.
Fixes: a9650b7f6f ("perf vendor events arm64: Add AmpereOne core PMU events")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231201021550.1109196-3-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ynl-generated user space C code is already above 25kLoC
and is growing.
The initial reason to commit these files was to make reviewing changes
to the generator easier. Unfortunately, it has the opposite effect on
reviewing changes to specs, and we get far more changes to specs
than to the generator.
Uncommit those fails, as they are generated on the fly as needed.
netdev patchwork now runs a script on each series to create a diff
of generated code on the fly, for the rare cases when looking at
it is helpful:
https://github.com/kuba-moo/nipa/blob/master/tests/series/ynl/ynl.sh
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AmpereOne metrics were missing DefaultMetricgroupName from metrics with
"Default" in group name resulting perf to segfault. Add the missing
field to address the issue.
Fixes: 59faeaf80d ("perf vendor events arm64: Fix for AmpereOne metrics")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20231201021550.1109196-2-ilkka@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
A metric is default by having "Default" within its groups. The default
metricgroup name needn't be set and this can result in segv in
default_metricgroup_cmp and perf_stat__print_shadow_stats_metricgroup
that assume it has a value when there is a Default metric group. To
avoid the segv initialize the value to "".
Fixes: 1c0e47956a ("perf metrics: Sort the Default metricgroup")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: stable@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20231204182330.654255-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
plane_view_scanout_stride() currently assumes that we had to pad the
mapping stride with dummy pages in order to align it. But that is not
the case if the original fb stride exceeds the aligned stride used
to populate the remapped view, which is calculated from the user
specified framebuffer width rather than the user specified framebuffer
stride.
Ignore the original fb stride in this case and just stick to the POT
aligned stride. Getting this wrong will cause the plane to fetch the
wrong data, and can lead to fault errors if the page tables at the
bogus location aren't even populated.
TODO: figure out if this is OK for CCS, or if we should instead increase
the width of the view to cover the entire user specified fb stride
instead...
Cc: Imre Deak <imre.deak@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204202443.31247-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
io_uring sets up the io worker kernel thread via a syscall out of an
user space prrocess. This process might have used FPU and since
copy_thread() didn't clear FPU states for kernel threads a BUG()
is triggered for using FPU inside kernel. Move code around
to always clear FPU state for user and kernel threads.
Cc: stable@vger.kernel.org
Reported-by: Aurelien Jarno <aurel32@debian.org>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1055021
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are many types of revsered memory passed from firmware
that should be reserved in memblock, and UMA memory passed
from firmware that should be added to system memory for system
to use.
Also for memblock there is no need to align those space into page,
which actually cause problems.
Handle them properly to prevent memory corruption on some systems.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are some Loongson64 systems come with broken coherent DMA
support, firmware will set a bit in boot_param and pass nocoherentio
in cmdline.
However nonconherent support was missed out when spin off Loongson-2EF
form Loongson64, and that boot_param change never made itself into
upstream.
Support DMA noncoherent properly to get those systems working.
Cc: stable@vger.kernel.org
Fixes: 71e2f4dd5a ("MIPS: Fork loongson2ef from loongson64")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
vgabios is passed from firmware to kernel on Loongson64 systems.
Sane firmware will keep this pointer in reserved memory space
passed from the firmware but insane firmware keeps it in low
memory before kernel entry that is not reserved.
Previously kernel won't try to allocate memory from low memory
before kernel entry on boot, but after converting to memblock
it will do that.
Fix by resversing those memory on early boot.
Cc: stable@vger.kernel.org
Fixes: a94e4f24ec ("MIPS: init: Drop boot_mem_map")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
rcutree_report_cpu_starting() must be called before
clockevents_register_device() to avoid the following lockdep splat triggered by
calling list_add() when CONFIG_PROVE_RCU_LIST=y:
WARNING: suspicious RCU usage
...
-----------------------------
kernel/locking/lockdep.c:3680 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
no locks held by swapper/1/0.
...
Call Trace:
[<ffffffff8012a434>] show_stack+0x64/0x158
[<ffffffff80a93d98>] dump_stack_lvl+0x90/0xc4
[<ffffffff801c9e9c>] __lock_acquire+0x1404/0x2940
[<ffffffff801cbf3c>] lock_acquire+0x14c/0x448
[<ffffffff80aa4260>] _raw_spin_lock_irqsave+0x50/0x88
[<ffffffff8021e0c8>] clockevents_register_device+0x60/0x1e8
[<ffffffff80130ff0>] r4k_clockevent_init+0x220/0x3a0
[<ffffffff801339d0>] start_secondary+0x50/0x3b8
raw_smp_processor_id() is required in order to avoid calling into lockdep
before RCU has declared the CPU to be watched for readers.
See also commit 29368e0939 ("x86/smpboot: Move rcu_cpu_starting() earlier"),
commit de5d9dae15 ("s390/smp: move rcu_cpu_starting() earlier") and commit
99f070b623 ("powerpc/smp: Call rcu_cpu_starting() earlier").
Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The typical style is to define functions before calling them. Move
pci_mmcfg_arch_map() and pci_mmcfg_arch_unmap() earlier so they're defined
before they're called. No functional change intended.
Link: https://lore.kernel.org/r/20231121183643.249006-10-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
If pci_mmconfig_alloc() fails, return the failure early so it's obvious
that the failure is the exception, and the success is the normal case. No
functional change intended.
Link: https://lore.kernel.org/r/20231121183643.249006-9-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In pci_mmconfig_insert(), there's no reference to "addr" between locking
pci_mmcfg_lock and testing "addr", so it *looks* like we should move the
test before the lock.
But 07f9b61c39 ("x86/PCI: MMCONFIG: Check earlier for MMCONFIG region at
address zero") did that, which broke things by returning -EINVAL when
"addr" is zero instead of -EEXIST.
So 07f9b61c39 was reverted by 67d470e0e1 ("Revert "x86/PCI: MMCONFIG:
Check earlier for MMCONFIG region at address zero"").
Add a comment about this issue to prevent it from happening again.
Link: https://lore.kernel.org/r/20231121183643.249006-8-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
"pci_mmcfg_check_reserved()" doesn't give a hint about what the boolean
return value means. Rename it to pci_mmcfg_reserved() so testing
"if (pci_mmcfg_reserved())" makes sense.
Update callers to treat the return value as boolean instead of comparing
with 0.
Link: https://lore.kernel.org/r/20231121183643.249006-7-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
"acpi_mcfg_check_entry()" doesn't give a hint about what the return value
means. Rename it to "acpi_mcfg_valid_entry()", convert the return value to
bool, and update the return values and callers to match so testing
"if (acpi_mcfg_valid_entry())" makes sense.
Link: https://lore.kernel.org/r/20231121183643.249006-6-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The "MMCONFIG" term is not used in PCI/PCIe specs. Replace it with "ECAM",
the term used in PCIe r6.0, sec 7.2.2.
Define pr_fmt() instead of repeating PREFIX in every log message.
Link: https://lore.kernel.org/r/20231121183643.249006-5-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
MCFG handling is a frequent source of problems. Add more logging to aid in
debugging.
Enable the logging with CONFIG_DYNAMIC_DEBUG=y and the kernel boot
parameter 'dyndbg="file arch/x86/pci +p"'.
Link: https://lore.kernel.org/r/20231121183643.249006-4-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
fd3a8cff4d ("x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM
space") added the concept of using the EFI memory map to help decide
whether ECAM space mentioned in the MCFG table is valid.
Unfortunately it described that EfiMemoryMappedIO space as "reserved", but
it is actually not *reserved* by the EFI memory map. EfiMemoryMappedIO
only means the firmware requested that the OS map this space for use by
firmware runtime services.
Change the dmesg logging to describe it as simply "EfiMemoryMappedIO", not
as "reserved as EfiMemoryMappedIO". A previous commit actually *does*
reserve the space if ACPI PNP0C01/02 devices haven't done so:
- PCI: ECAM at [mem 0xe0000000-0xefffffff] reserved as EfiMemoryMappedIO
+ PCI: ECAM at [mem 0xe0000000-0xefffffff] is EfiMemoryMappedIO; assuming valid
PCI: ECAM [mem 0xe0000000-0xefffffff] reserved to work around lack of ACPI motherboard _CRS
Link: https://lore.kernel.org/r/20231121183643.249006-3-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
