Tomasz, Sebastian, and some Proxmox users reported problems initializing
ixgbe NICs.
I think the problem is that ECAM space described in the ACPI MCFG table is
not reserved via a PNP0C02 _CRS method as required by the PCI Firmware spec
(r3.3, sec 4.1.2), but it *is* included in the PNP0A03 host bridge _CRS as
part of the MMIO aperture.
If we allocate space for a PCI BAR, we're likely to allocate it from that
ECAM space, which obviously cannot work.
This could happen for any device, but in the ixgbe case it happens because
it's an SR-IOV device and the BIOS didn't allocate space for the VF BARs,
so Linux reallocated the bridge window leading to ixgbe and put it on top
of the ECAM space. From Tomasz' system:
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] not reserved in ACPI motherboard resources
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window]
pci 0000:00:01.1: PCI bridge to [bus 02-03]
pci 0000:00:01.1: bridge window [mem 0xfb900000-0xfbbfffff]
pci 0000:02:00.0: [8086:10fb] type 00 class 0x020000 # ixgbe
pci 0000:02:00.0: reg 0x10: [mem 0xfba80000-0xfbafffff 64bit]
pci 0000:02:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:02:00.0: BAR 7: no space for [mem size 0x00100000 64bit] # VF BAR 0
pci_bus 0000:00: No. 2 try to assign unassigned res
pci 0000:00:01.1: resource 14 [mem 0xfb900000-0xfbbfffff] released
pci 0000:00:01.1: BAR 14: assigned [mem 0x80000000-0x806fffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0x80000000-0x8007ffff 64bit]
pci 0000:02:00.0: BAR 7: assigned [mem 0x80204000-0x80303fff 64bit] # VF BAR 0
Fixes: 07eab0901e ("efi/x86: Remove EfiMemoryMappedIO from E820 map")
Fixes: fd3a8cff4d ("x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space")
Reported-by: Tomasz Pala <gotar@polanet.pl>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218050
Reported-by: Sebastian Manciulea <manciuleas@protonmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218107
Link: https://forum.proxmox.com/threads/proxmox-8-kernel-6-2-16-4-pve-ixgbe-driver-fails-to-load-due-to-pci-device-probing-failure.131203/
Link: https://lore.kernel.org/r/20231121183643.249006-2-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v6.2+
Alex Austin says:
====================
sfc: Implement ndo_hwtstamp_(get|set)
Implement ndo_hwtstamp_get and ndo_hwtstamp_set for sfc and sfc-siena.
====================
Link: https://lore.kernel.org/r/20231130135826.19018-1-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update efx->ptp_data to use kernel_hwtstamp_config and implement
ndo_hwtstamp_(get|set). Remove SIOCGHWTSTAMP and SIOCSHWTSTAMP from
efx_ioctl.
Signed-off-by: Alex Austin <alex.austin@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231130135826.19018-3-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update efx->ptp_data to use kernel_hwtstamp_config and implement
ndo_hwtstamp_(get|set). Remove SIOCGHWTSTAMP and SIOCSHWTSTAMP from
efx_ioctl.
Signed-off-by: Alex Austin <alex.austin@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20231130135826.19018-2-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hookup the CS35L56 DAPM_OUTPUT widgets to a DAPM_SPK widget so
that there is a complete logical path to a speaker.
There is no particular reason to use multiple speaker widgets.
The CS35L56 are designed to work together as a set so they have
all been connected to a single speaker widget.
Instead of a hardcoded list of codec widget names, the code walks
through all the codecs on the dailink and for every cs35l56 it uses
its name prefix to construct the source end of the route. This adds
a small amount of overhead during probe but has the benefit that it
isn't dependent on every system using the same prefixes.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231205135001.2506070-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently repeated access of wiphy data from mac80211 hw structure is
happen inside the mac80211 registration helper functions. So optimize
these helper functions by storing wiphy data locally and accessing it
directly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231201013735.2292313-1-quic_periyasa@quicinc.com
For AP mode, the peer is created earlier in ath12k_mac_op_add_interface() but
ath12k_mac_op_assign_vif_chanctx() will try to create peer again. Then an
error will return which makes AP mode startup fail.
Kernel log:
[ 5017.665006] ath12k_pci 0000:04:00.0: failed to create peer after vdev start delay: -22
wpa_supplicant log:
Failed to set beacon parameters
Interface initialization failed
wls1: interface state UNINITIALIZED->DISABLED
wls1: AP-DISABLED
wls1: Unable to setup interface.
Failed to initialize AP interface
wls1: interface state DISABLED->DISABLED
wls1: AP-DISABLED
So fix this check and enable AP mode for WCN7850, as now AP mode works normally.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121022459.17209-1-quic_kangyang@quicinc.com
With VT-d disabled on Intel platform, ath12k gets only one MSI
vector. In that case, ath12k does not free IRQ when doing suspend,
hence the kernel has to migrate it to CPU0 (if it was affine to
other CPUs) and allocates a new MSI vector. However, ath12k has
no chance to reconfig it to HW srngs during this phase, thus
ath12k fails to resume.
This issue can be fixed by setting IRQ affinity to CPU0 before
request_irq is called. With such affinity, migration will not
happen and thus the vector keeps unchanged during suspend/resume.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121021304.12966-8-quic_kangyang@quicinc.com
Current code enables ASPM by default, it allows MHI to enter M2 state.
In case of one MSI vector, system hang is observed if ath12k does MHI
register reading in this state.
The workaround here is to prevent MHI from entering M2 state, this can
be done by disabling ASPM if only one MSI vector is used. When using 32
vectors ASPM is enabled as before.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121021304.12966-7-quic_kangyang@quicinc.com
On some platforms it's not possible to allocate 32 MSI vectors for
various reasons, maybe kernel configuration, VT-d disabled, buggy BIOS
etc. So ath12k was not able to use WCN7850 PCI devices on those
platforms. Add support for one MSI vector to solve that.
In case of one MSI vector, interrupt migration needs to be disabled.
This is because when interrupt migration happens, the msi_data may
change. However, msi_data is already programmed to rings during initial
phase and ath12k has no way to know that msi_data is changed during run
time and reprogram again.
In case of one MSI vector, MHI subsystem should not use IRQF_NO_SUSPEND
as WCN7850 doesn't set this flag too. Ath12k doesn't need to leave IRQ
enabled in suspend state.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121021304.12966-6-quic_kangyang@quicinc.com
This is to prepare for one MSI vector support. IRQ enable and disable
of CE and DP are done only in case of multiple MSI vectors.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121021304.12966-5-quic_kangyang@quicinc.com
Like ATH12K_PCI_IRQ_CE0_OFFSET, define ATH12K_PCI_IRQ_DP_OFFSET for
DP to save the IRQ instead of base_vector from MSI config.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121021304.12966-4-quic_kangyang@quicinc.com
Add two flags to indicate whether IRQ handler for CE and DP can be called.
This is because in one MSI vector case, interrupt is not disabled in
hif_stop and hif_irq_disable. So if interrupt is disabled, MHI interrupt
is disabled too.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121021304.12966-3-quic_kangyang@quicinc.com
The reservation mode of interrupts in kernel assigns a dummy vector
when the interrupt is allocated and assigns a real vector when the
request_irq is called. The reservation mode helps to ease vector
pressure when devices with a large amount of queues/interrupts are
initialized, but only a minimal subset of those queues/interrupts
is actually used.
So on reservation mode, the msi_data may change after request_irq is
called, then it will lead to spurious interrupt. But when VT-d in
BIOS is enabled and ath12k can get 32 MSI vectors, ath12k always get
the same msi_data before and after request_irq.
So in case of one MSI vector, ath12k need read msi_data again after
request_irq is called, and then the correct msi_data is programmed
into WCN7850 hardware components.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121021304.12966-2-quic_kangyang@quicinc.com
The rvu_dl will be freed in rvu_npa_health_reporters_destroy(rvu_dl)
after the create_workqueue fails, and after that free, the rvu_dl will
be translate back through rvu_npa_health_reporters_create,
rvu_health_reporters_create, and rvu_register_dl. Finally it goes to the
err_dl_health label, being freed again in
rvu_health_reporters_destroy(rvu) by rvu_npa_health_reporters_destroy.
In the second calls of rvu_npa_health_reporters_destroy, however,
it uses rvu_dl->rvu_npa_health_reporter, which is already freed at
the end of rvu_npa_health_reporters_destroy in the first call.
So this patch prevents the first destroy by instantly returning -ENONMEN
when create_workqueue fails. In addition, since the failure of
create_workqueue is the only entrence of label err, it has been
integrated into the error-handling path of create_workqueue.
Fixes: f1168d1e20 ("octeontx2-af: Add devlink health reporters for NPA")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20231202095902.3264863-1-alexious@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In current code, init_irq_stacks() will call cpu_to_node().
The cpu_to_node() depends on percpu "numa_node" which is initialized in:
arch_call_rest_init() --> rest_init() -- kernel_init()
--> kernel_init_freeable() --> smp_prepare_cpus()
But init_irq_stacks() is called in init_IRQ() which is before
arch_call_rest_init().
So in init_irq_stacks(), the cpu_to_node() does not work, it
always return 0. In NUMA, it makes the node 1 cpu accesses the IRQ stack which
is in the node 0.
This patch fixes it by:
1.) export the early_cpu_to_node(), and use it in the init_irq_stacks().
2.) change init_irq_stacks() to __init function.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231124031513.81548-1-shijie@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Commit ddb5cdbafa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm-generic/export.h>, which is now a wrapper of
<linux/export.h>.
Replace #include <asm-generic/export.h> with #include <linux/export.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20231126151045.1556686-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add driver support for i.MX8DXL DDR Perf, which supports AXI ID PORT
CHANNEL filter.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231120093317.2652866-4-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a compatible for i.MX8DXL which is compatile with "fsl,imx8-ddr-pmu".
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20231120093317.2652866-3-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
This is the extension of AXI ID filter.
Filter is defined with 2 configuration registers per counter 1-3 (counter
0 is not used for filtering and lacks these registers).
* Counter N MASK COMP register - AXI_ID and AXI_MASKING.
* Counter N MUX CNTL register - AXI CHANNEL and AXI PORT.
-- 0: address channel
-- 1: data channel
This filter is exposed to userspace as an additional (channel, port) pair.
The definition of axi_channel is inverted in userspace, and it will be
reverted in driver automatically.
AXI filter of Perf Monitor in DDR Subsystem, only a single port0 exist, so
axi_port is reserved which should be 0.
e.g.
perf stat -a -e imx8_ddr0/axid-read,axi_mask=0xMMMM,axi_id=0xDDDD,axi_channel=0xH/ cmd
perf stat -a -e imx8_ddr0/axid-write,axi_mask=0xMMMM,axi_id=0xDDDD,axi_channel=0xH/ cmd
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231120093317.2652866-1-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
xdp_metadata test is flaky sometimes:
verify_xsk_metadata:FAIL:rx_hash_type unexpected rx_hash_type: actual 8 != expected 0
Where 8 means XDP_RSS_TYPE_L4_ANY and is exported from veth driver only when
'skb->l4_hash' condition is met. This makes me think that the program is
triggering again for some other packet.
Let's have a filter, similar to xdp_hw_metadata, where we trigger XDP kfuncs
only for UDP packets destined to port 8080.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231204174423.3460052-1-sdf@google.com
There was some confusion amongst Meta sched_ext folks regarding whether
stashing bpf_rb_root - the tree itself, rather than a single node - was
supported. This patch adds a small test which demonstrates this
functionality: a local kptr with rb_root is created, a node is created
and added to the tree, then the tree is kptr_xchg'd into a mapval.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20231204211722.571346-1-davemarchevsky@fb.com
Support i.MX93 ANATOP module which contains PLL and OSC for Clock
Controller Module
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20231121063446.155300-1-peng.fan@oss.nxp.com
[abel.vesa@linaro.org: renamed to ANATOP instead of Analog]
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Move the buffer list 'is_ready' check below the validity check for
the buffer list for a given group.
Fixes: 5cf4f52e6d ("io_uring: free io_buffer_list entries via RCU")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a spelling mistake in a dev_err_probe error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231205101740.2820813-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT722 SDCA codec supports 3 data lanes,
lane_control_support property has to be
set to use additional two lanes.
Reviewed-by: Jack Yu <jack580304@gmail.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204213721.197785-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Upstream commit e0205d6203 ("spi: atmel: Prevent false timeouts on
long transfers") has tried to mitigate the problem of getting spi
transfers canceled because they were lasting too long. On slow buses,
transfers in the MiB range can take more than one second and thus a
calculation was added to progressively increment the timeout value. In
order to not be too problematic from a user point of view (waiting dozen
of seconds or even minutes), the wait call was turned interruptible.
Turning the wait interruptible was a mistake as what we really wanted to
do was to be able to kill a transfer. Any signal interrupting our
transfer would not be suitable at all so a second attempt was made at
turning the wait killable instead.
Link: https://lore.kernel.org/linux-spi/20231127095842.389631-1-miquel.raynal@bootlin.com/
All being well, it was reported that JFFS2 was showing a splat when
interrupting a transfer. After some more debate about whether JFFS2
should be fixed and how, it was also pointed out that the whole
consistency of the filesystem in case of parallel I/O would be
compromised. Changing JFFS2 behavior would in theory be possible but
nobody has the energy and time and knowledge to do this now, so better
prevent spi transfers to be interrupted by the user.
Partially revert the blamed commit to no longer use the interruptible
nor the killable variant of wait_for_completion().
Fixes: e0205d6203 ("spi: atmel: Prevent false timeouts on long transfers")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Link: https://lore.kernel.org/r/20231205083102.16946-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In xsk_poll(), checking available events and setting mask bits should
be executed only when a socket has been bound. Setting mask bits for
unbound socket is meaningless.
Currently, it checks events even when xsk_check_common() failed.
To prevent this, we move goto location (skip_tx) after that checking.
Fixes: 1596dae2f1 ("xsk: check IFF_UP earlier in Tx path")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20231201061048.GA1510@libra05
The .parse_protocol hook function in the ipvlan_header_ops structure is
not implemented. As a result, when the AF_PACKET family is used to send
packets, skb->protocol will be set to 0.
Ipvlan is a device of type ARPHRD_ETHER (ether_setup). Therefore, use
eth_header_parse_protocol function to obtain the protocol.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231202130438.2266343-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The .parse_protocol hook function in the macvlan_header_ops structure is
not implemented. As a result, when the AF_PACKET family is used to send
packets, skb->protocol will be set to 0.
Macvlan is a device of type ARPHRD_ETHER (ether_setup). Therefore, use
eth_header_parse_protocol function to obtain the protocol.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231202130658.2266526-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the 32-bit arm PMU drivers use the pmu_hw_events::lock spinlock in
their arm_pmu::{start,stop,enable,disable}() callbacks to protect hardware
state and event data.
This locking is not necessary as the perf core code already provides mutual
exclusion, disabling interrupts to serialize against the IRQ handler, and
using perf_event_context::lock to protect against concurrent modifications of
events cross-cpu.
The locking was removed from the arm64 (now PMUv3) PMU driver in commit:
2a0e2a02e4 ("arm64: perf: Remove PMU locking")
... and the same reasoning applies to all the 32-bit PMU drivers.
Remove the locking from the 32-bit PMU drivers.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-perf-users@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231115092805.737822-2-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Some event id of HiSilicon uncore UC PMU driver is incorrect, fix them.
Fixes: 312eca95e2 ("drivers/perf: hisi: Add support for HiSilicon UC PMU driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20231204110425.20354-1-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use #pwm-cells for all i.MX variants. Only fsl,imx1-pwm does not support
inverted PWM output. Keep it the same for consistency.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SW_INCR event is somewhat unusual, and depends on the specific HW
counter that it is programmed into. When programmed into PMEVCNTR<n>,
SW_INCR will count any writes to PMSWINC_EL0 with bit n set, ignoring
writes to SW_INCR with bit n clear.
Event rotation means that there's no fixed relationship between
perf_events and HW counters, so this isn't all that useful.
Further, we program PMUSERENR.{SW,EN}=={0,0}, which causes EL0 writes to
PMSWINC_EL0 to be trapped and handled as UNDEFINED, resulting in a
SIGILL to userspace.
Given that, it's not a good idea to expose SW_INCR in sysfs. Hide it as
we did for CHAIN back in commit:
4ba2578fa7 ("arm64: perf: don't expose CHAIN event in sysfs")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231204115847.2993026-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
This further compacts all remaining PMU init procedures requiring specific
map_event functions via a new macro PMUV3_INIT_MAP_EVENT(). While here, it
also changes generated init function names to match to those generated via
the other macro PMUV3_INIT_SIMPLE(). This does not cause functional change.
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231114061656.337231-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Since commit c7e73b5051 ("ARM: imx: mach-imx6ul: remove 14x14 EVK
specific PHY fixup")thet Ethernet PHY is no longer configured via code
in board file.
This caused Ethernet to stop working.
Fix this problem by describing the clocks and clock-names to the
Ethernet PHY node so that the KSZ8081 chip can be clocked correctly.
Fixes: c7e73b5051 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
An out of bounds read can occur within the tracepoint 9p_protocol_dump. In
the fast assign, there is a memcpy that uses a constant size of 32 (macro
named P9_PROTO_DUMP_SZ). When the copy is invoked, the source buffer is not
guaranteed match this size. It was found that in some cases the source
buffer size is less than 32, resulting in a read that overruns.
The size of the source buffer seems to be known at the time of the
tracepoint being invoked. The allocations happen within p9_fcall_init(),
where the capacity field is set to the allocated size of the payload
buffer. This patch tries to fix the overrun by changing the fixed array to
a dynamically sized array and using the minimum of the capacity value or
P9_PROTO_DUMP_SZ as its length. The trace log statement is adjusted to
account for this. Note that the trace log no longer splits the payload on
the first 16 bytes. The full payload is now logged to a single line.
To repro the orignal problem, operations to a plan 9 managed resource can
be used. The simplest approach might just be mounting a shared filesystem
(between host and guest vm) using the plan 9 protocol while the tracepoint
is enabled.
mount -t 9p -o trans=virtio <mount_tag> <mount_path>
The bpftrace program below can be used to show the out of bounds read.
Note that a recent version of bpftrace is needed for the raw tracepoint
support. The script was tested using v0.19.0.
/* from include/net/9p/9p.h */
struct p9_fcall {
u32 size;
u8 id;
u16 tag;
size_t offset;
size_t capacity;
struct kmem_cache *cache;
u8 *sdata;
bool zc;
};
tracepoint:9p:9p_protocol_dump
{
/* out of bounds read can happen when this tracepoint is enabled */
}
rawtracepoint:9p_protocol_dump
{
$pdu = (struct p9_fcall *)arg1;
$dump_sz = (uint64)32;
if ($dump_sz > $pdu->capacity) {
printf("reading %zu bytes from src buffer of %zu bytes\n",
$dump_sz, $pdu->capacity);
}
}
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Message-ID: <20231204202321.22730-1-inwardvessel@gmail.com>
Fixes: 60ece0833b ("net/9p: allocate appropriate reduced message buffers")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
A subtle copy-paste error managed to slip through the reorganisation
of these patches in development, and not only give some HN-F events
the wrong type, but use that wrong type before the subsequent patch
defined it. Too late to fix history, but we can at least fix the bug.
Fixes: b1b7dc38e4 ("perf/arm-cmn: Refactor HN-F event selector macros")
Reported-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5a22439de84ff188ef76674798052448eb03a3e1.1700740693.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
TQMa7x (revision 01xxx) uses a LM75A temperature sensor.
The two sensors use different I2C addresses, so we can set both sensors
simultaneously.
Signed-off-by: João Rodrigues <jrodrigues@ubimet.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.
For symmetry do the same with pfn_to_virt().
For compiletime resolution of __pa() we need PAGE_OFFSET which
was not available to __pa() and resolved by the preprocessor
wherever __pa() was used. Fix this by explicitly including
<asm/mem-layout.h> where required, following the pattern of the
architectures page.h file.
Acked-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.
In order to do this we move the virt_to_phys() and
below the definition of the __pa() and __va() macros so it
compiles. The macro version was also able to do recursive
symbol resolution.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When this file is included before defining readq(), it misses the
declarations for a couple of functions that now become unusable:
lib/iomap.c:156:5: warning: no previous prototype for 'ioread64_lo_hi' [-Wmissing-prototypes]
lib/iomap.c:163:5: warning: no previous prototype for 'ioread64_hi_lo' [-Wmissing-prototypes]
lib/iomap.c:170:5: warning: no previous prototype for 'ioread64be_lo_hi' [-Wmissing-prototypes]
lib/iomap.c:178:5: warning: no previous prototype for 'ioread64be_hi_lo' [-Wmissing-prototypes]
lib/iomap.c:264:6: warning: no previous prototype for 'iowrite64_lo_hi' [-Wmissing-prototypes]
lib/iomap.c:272:6: warning: no previous prototype for 'iowrite64_hi_lo' [-Wmissing-prototypes]
lib/iomap.c:280:6: warning: no previous prototype for 'iowrite64be_lo_hi' [-Wmissing-prototypes]
lib/iomap.c:288:6: warning: no previous prototype for 'iowrite64be_hi_lo' [-Wmissing-prototypes]
The file is included again later from asm-generic/io.h, so dropping the initial
include statement makes it do the right thing, both for avoiding the warning
and for actually providing these functions.
Link: https://lkml.kernel.org/r/20231204115710.2247097-17-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@rothwell.id.au>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Back in 2016, it was argued that implementations lacking a HW
prefetcher could be helped by sprinkling a number of PRFM
instructions in strategic locations.
In 2023, the one platform that presumably needed this hack is no
longer in active use (let alone maintained), and an quick
experiment shows dropping this hack only leads to a 0.4% drop
on a full kernel compilation (tested on a MT30-GS0 48 CPU system).
Given that this is pretty much in the noise department and that
it may give odd ideas to other implementers, drop the hack for
good.
Suggested-by: Will Deacon <will@kernel.org>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20231122133754.1240687-1-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Hangbin Liu says:
====================
Conver net selftests to run in unique namespace (Part 1)
As Guillaume pointed, many selftests create namespaces with very common
names (like "client" or "server") or even (partially) run directly in init_net.
This makes these tests prone to failure if another namespace with the same
name already exists. It also makes it impossible to run several instances
of these tests in parallel.
This patch set intend to conver all the net selftests to run in unique namespace,
so we can update the selftest freamwork to run all tests in it's own namespace
in parallel. After update, we only need to wait for the test which need
longest time.
As the total patch set is too large. I break it to severl parts. This is
the first part.
v2 -> v3:
- Convert all ip netns del to cleanup_ns (Justin Iurman)
v1 -> v2:
- Split the large patch set to small parts for easy review (Paolo Abeni)
- Move busywait from forwarding/lib.sh to net/lib.sh directly (Petr Machata)
- Update setup_ns/cleanup_ns struct (Petr Machata)
- Remove default trap in lib.sh (Petr Machata)
====================
Link: https://lore.kernel.org/r/20231202020110.362433-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
