Here is the test result after conversion.
# ./unicast_extensions.sh
/usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin)
###########################################################################
Unicast address extensions tests (behavior of reserved IPv4 addresses)
###########################################################################
TEST: assign and ping within 240/4 (1 of 2) (is allowed) [ OK ]
TEST: assign and ping within 240/4 (2 of 2) (is allowed) [ OK ]
TEST: assign and ping within 0/8 (1 of 2) (is allowed) [ OK ]
...
TEST: assign and ping class D address (is forbidden) [ OK ]
TEST: routing using class D (is forbidden) [ OK ]
TEST: routing using 127/8 (is forbidden) [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./sctp_vrf.sh
Testing For SCTP VRF:
TEST 01: nobind, connect from client 1, l3mdev_accept=1, Y [PASS]
...
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [PASS]
***v6 Tests Done***
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./l2tp.sh
TEST: IPv4 basic L2TP tunnel [ OK ]
TEST: IPv4 route through L2TP tunnel [ OK ]
TEST: IPv6 basic L2TP tunnel [ OK ]
TEST: IPv6 route through L2TP tunnel [ OK ]
TEST: IPv4 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 basic L2TP tunnel [ OK ]
TEST: IPv4 route through L2TP tunnel [ OK ]
TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 basic L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv4 route through L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv6 basic L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv6 route through L2TP tunnel - after IPsec teardown [ OK ]
Tests passed: 16
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./ioam6.sh
--------------------------------------------------------------------------
OUTPUT tests
--------------------------------------------------------------------------
TEST: Unknown IOAM namespace (inline mode) [ OK ]
TEST: Unknown IOAM namespace (encap mode) [ OK ]
TEST: Missing trace room (inline mode) [ OK ]
TEST: Missing trace room (encap mode) [ OK ]
TEST: Trace type with bit 0 only (inline mode) [ OK ]
...
TEST: Full supported trace (encap mode) [ OK ]
--------------------------------------------------------------------------
GLOBAL tests
--------------------------------------------------------------------------
TEST: Forward - Full supported trace (inline mode) [ OK ]
TEST: Forward - Full supported trace (encap mode) [ OK ]
- Tests passed: 88
- Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./icmp.sh
OK
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
# ./icmp_redirect.sh
###########################################################################
Legacy routing
###########################################################################
TEST: IPv4: redirect exception [ OK ]
...
TEST: IPv4: mtu exception plus redirect [ OK ]
TEST: IPv6: mtu exception plus redirect [ OK ]
Tests passed: 40
Tests failed: 0
Tests xfailed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./traceroute.sh
TEST: IPV6 traceroute [ OK ]
TEST: IPV4 traceroute [ OK ]
Tests passed: 2
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./drop_monitor_tests.sh
Software drops test
TEST: Capturing active software drops [ OK ]
TEST: Capturing inactive software drops [ OK ]
Hardware drops test
TEST: Capturing active hardware drops [ OK ]
TEST: Capturing inactive hardware drops [ OK ]
Tests passed: 4
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./cmsg_ipv6.sh
OK
]# ./cmsg_so_mark.sh
OK
]# ./cmsg_time.sh
OK
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
2 tests also failed without this patch
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ]
TEST: test_ndisc: accept_untracked_na=0 [ OK ]
TEST: test_ndisc: accept_untracked_na=1 [ OK ]
TEST: test_ndisc: accept_untracked_na=2 same_subnet=0 [ OK ]
TEST: test_ndisc: accept_untracked_na=2 same_subnet=1 [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When do arping, the interface need to be specified. Or we will
get error: Interface "lo" is not ARPable. And the test failed.
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [FAIL]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [FAIL]
After fix:
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ]
Fixes: 0ea7b0a454 ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./arp_ndisc_evict_nocarrier.sh
run arp_evict_nocarrier=1 test
ok
run arp_evict_nocarrier=0 test
ok
run all.arp_evict_nocarrier=0 test
ok
run ndisc_evict_nocarrier=1 test
ok
run ndisc_evict_nocarrier=0 test
ok
run all.ndisc_evict_nocarrier=0 test
ok
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a lib.sh for net selftests. This file can be used to define commonly
used variables and functions. Some commonly used functions can be moved
from forwarding/lib.sh to this lib file. e.g. busywait().
Add function setup_ns() for user to create unique namespaces with given
prefix name.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nfsd/ksmbd call vfs_copy_file_range() with flag COPY_FILE_SPLICE to
perform kernel copy between two files on any two filesystems.
Splicing input file, while holding file_start_write() on the output file
which is on a different sb, posses a risk for fanotify related deadlocks.
We only need to call splice_file_range() from within the context of
->copy_file_range() filesystem methods with file_start_write() held.
To avoid the possible deadlocks, always use do_splice_direct() instead of
splice_file_range() for the kernel copy fallback in vfs_copy_file_range()
without holding file_start_write().
Reported-and-tested-by: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231130141624.3338942-4-amir73il@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
'make vdso_install' renames arch/arm64/kernel/vdso32/vdso.so.dbg to
vdso32.so during installation, which allows 64-bit and 32-bit vdso
files to be installed in the same directory.
However, arm64 is the only architecture that requires this renaming.
To simplify the vdso_install logic, rename the in-tree vdso file so
its base name matches the installed file name.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20231117125620.1058300-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
kasan_pte_populate fill KASAN_SHADOW_INIT in the newly
allocated shadow page, so it's unnecessary to
use memblock_alloc_try_nid, which always zero the
new allocated memory.
Use memblock_alloc_try_nid_raw instead of
memblock_alloc_try_nid like arm64 does which
can make kasan init faster.
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Attempt VMA lock-based page fault handling first, and fall back to the
existing mmap_lock-based handling if that fails, the ebizzy benchmark
shows 25% improvement on qemu with 2 cpus.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
kconfig warns when PINCTRL_SINGLE is selected but PINCTRL is not
set, so also set PINCTRL for ARCH_DAVINCI. This prevents a
kconfig/build warning:
WARNING: unmet direct dependencies detected for PINCTRL_SINGLE
Depends on [n]: PINCTRL [=n] && OF [=y] && HAS_IOMEM [=y]
Selected by [y]:
- ARCH_DAVINCI [=y] && ARCH_MULTI_V5 [=y]
Closes: lore.kernel.org/r/202311070548.0f6XfBrh-lkp@intel.com
Fixes: f962396ce2 ("ARM: davinci: support multiplatform build for ARM v5")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Add the missing "Unconditional Advanced SIMD and floating-point
instructions" in [1] to the VFP undef hook.
This commit addresses the issue reported in [2], where
executing the vudot instruction on a platform with FEAT_DotProd
support resulted in an undefined instruction error.
Link: https://developer.arm.com/documentation/ddi0597/2023-06/?lang=en [1]
Link: https://lore.kernel.org/lkml/20230920083907.30479-1-mark-pk.tsai@mediatek.com/ [2]
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Tested-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
We now have *two* values for CTR_EL0.L1Ip that are reserved.
Which makes things a bit awkward. In order to lift the ambiguity,
rename RESERVED (0b01) to RESERVED_AIVIVT, and VPIPT (0b00) to
RESERVED_VPIPT.
This makes it clear which of these meant what, and I'm sure
archeologists will find it useful...
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231204143606.1806432-4-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Since the kernel will never run on a system with the VPIPT i-cache
policy, drop the detection code altogether.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231204143606.1806432-3-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
We have some special handling for VPIPT I-cache in critical parts
of the cache and TLB maintenance. Remove it.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231204143606.1806432-2-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The drm_atomic_print_new_state() already prints private object state via
drm_atomic_private_obj_print_state(). Add private object state dumping
to __drm_state_dump(), so that it is also included into drm_state_dump()
output and into debugfs/dri/N/state file.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203000532.1290480-2-dmitry.baryshkov@linaro.org
With the removal of the 'iov' argument to import_single_range(), the two
functions are now fully identical. Convert the import_single_range()
callers to import_ubuf(), and remove the former fully.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20231204174827.1258875-3-axboe@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
Some users need to release resources attached to the vm_bo object when
it's destroyed. In Panthor's case, we need to release the pin ref so
BO pages can be returned to the system when all GPU mappings are gone.
This could be done through a custom drm_gpuvm::vm_bo_free() hook, but
this has all sort of locking implications that would force us to expose
a drm_gem_shmem_unpin_locked() helper, not to mention the fact that
having a ::vm_bo_free() implementation without a ::vm_bo_alloc() one
seems odd. So let's keep things simple, and extend drm_gpuvm_bo_put()
to report when the object is destroyed.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204151406.1977285-1-boris.brezillon@collabora.com
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-12-01 (ice)
This series contains updates to ice driver only.
Konrad provides temperature reporting via hwmon.
Arkadiusz adds reporting of Clock Generation Unit (CGU) information via
devlink info.
Pawel adjusts error messaging for ntuple filters to account for additional
possibility for encountering an error.
Karol ensures that all timestamps occurring around reset are processed and
renames some E822 functions to convey additional usage for E823 devices.
Jake provides mechanism to ensure that all timestamps on E822 devices
are processed.
The following are changes since commit 15bc81212f:
octeon_ep: set backpressure watermark for RX queues
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue 100GbE
====================
Link: https://lore.kernel.org/r/20231201180845.219494-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When code is applicable for both E822 and E823 devices, rename it from
E822 to E82X.
ICE_PHY_PER_NAC_E822 was unused, so just remove it.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The E822 hardware for Tx timestamping keeps track of how many
outstanding timestamps are still in the PHY memory block. It will not
generate a new interrupt to the MAC until all of the timestamps in the
region have been read.
If somehow all the available data is not read, but the driver has exited
its interrupt routine already, the PHY will not generate a new interrupt
even if new timestamp data is captured. Because no interrupt is
generated, the driver never processes the timestamp data. This state
results in a permanent failure for all future Tx timestamps.
It is not clear how the driver and hardware could enter this state.
However, if it does, there is currently no recovery mechanism.
Add a recovery mechanism via the periodic PTP work thread which invokes
ice_ptp_periodic_work(). Introduce a new check,
ice_ptp_maybe_trigger_tx_interrupt() which checks the PHY timestamp
ready bitmask. If any bits are set, trigger a software interrupt by
writing to PFINT_OICR.
Once triggered, the main timestamp processing thread will read through
the PHY data and clear the outstanding timestamp data. Once cleared, new
data should trigger interrupts as expected.
This should allow recovery from such a state rather than leaving the
device in a state where we cannot process Tx timestamps.
It is possible that this function checks for timestamp data
simultaneously with the interrupt, and it might trigger additional
unnecessary interrupts. This will cause a small amount of additional
processing.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Andrii Staikov <andrii.staikov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During reset, TX_TSYN interrupt should be processed as it may process
timestamps in brief moments before and after reset.
Timestamping should be enabled on VSIs at the end of reset procedure.
On ice_get_phy_tx_tstamp_ready error, interrupt should not be rearmed
because error only happens on resets.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Supported number of ntuple filters affect also maximum location value that
can be provided to ethtool command. Update error message to provide info
about max supported value.
Fix double spaces in the error messages.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Pawel Kaminski <pawel.kaminski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If Clock Generation Unit is present on NIC board user shall know its
details.
Provide the devlink info callback with a new:
- fixed type object (cgu.id) indicating hardware variant of onboard CGU,
- running type object (fw.cgu) consisting of CGU id, config and firmware
versions.
These information shall be known for debugging purposes.
Test (on NIC board with CGU)
$ devlink dev info <bus_name>/<dev_name> | grep cgu
cgu.id 36
fw.cgu 8032.16973825.6021
Test (on NIC board without CGU)
$ devlink dev info <bus_name>/<dev_name> | grep cgu -c
0
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To make sure that we don't unintentionally perform any unclocked and/or
unpowered R/W operation on GPU registers, before turning off clocks and
regulators we must make sure that no GPU, JOB or MMU ISR execution is
pending: doing that requires to add a mechanism to synchronize the
interrupts on suspend.
Add functions panfrost_{gpu,job,mmu}_suspend_irq() which will perform
interrupts masking and ISR execution synchronization, and then call
those in the panfrost_device_runtime_suspend() handler in the exact
sequence of job (may require mmu!) -> mmu -> gpu.
As a side note, JOB and MMU suspend_irq functions needed some special
treatment: as their interrupt handlers will unmask interrupts, it was
necessary to add an `is_suspended` bitmap which is used to address the
possible corner case of unintentional IRQ unmasking because of ISR
execution after a call to synchronize_irq().
At resume, clear each is_suspended bit in the reset path of JOB/MMU
to allow unmasking the interrupts.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-4-angelogioacchino.delregno@collabora.com
In preparation for adding a IRQ synchronization mechanism for PM suspend,
add gpu_irq and mmu_irq variables to struct panfrost_device and change
functions panfrost_gpu_init() and panfrost_mmu_init() to use those.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-3-angelogioacchino.delregno@collabora.com
Some SoCs may be equipped with a GPU containing two core groups
and this is exactly the case of Samsung's Exynos 5422 featuring
an ARM Mali-T628 MP6 GPU: the support for this GPU in Panfrost
is partial, as this driver currently supports using only one
core group and that's reflected on all parts of it, including
the power on (and power off, previously to this patch) function.
The issue with this is that even though executing the soft reset
operation should power off all cores unconditionally, on at least
one platform we're seeing a crash that seems to be happening due
to an interrupt firing which may be because we are calling power
transition only on the first core group, leaving the second one
unchanged, or because ISR execution was pending before entering
the panfrost_gpu_power_off() function and executed after powering
off the GPU cores, or all of the above.
Finally, solve this by:
- Avoid to enable the power transition interrupt on reset; and
- Ignoring the core_mask and ask the GPU to poweroff both core groups
Fixes: 22aa1a2090 ("drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-2-angelogioacchino.delregno@collabora.com
CONFIG_DEBUG_SLAB is going away with CONFIG_SLAB, so remove dead ifdefs
in mempool and dmapool code.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
In slab_common.c and slab.h headers, we can now remove all code behind
CONFIG_SLAB and CONFIG_DEBUG_SLAB ifdefs, and remove all CONFIG_SLUB
ifdefs.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The CPUHP_SLAB_PREPARE hooks are only used by SLAB which is removed.
SLUB defines them as NULL, so we can remove those altogether.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
With SLAB removed, these are never true anymore so we can clean up.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Some struct slab fields are initialized differently for SLAB and SLUB so
we can simplify with SLUB being the only remaining allocator.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
With SLAB removed and SLUB the only remaining allocator, we can clean up
some code that was depending on the choice.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Pedro Tammela says:
====================
net/sched: act_api: contiguous action arrays
When dealing with action arrays in act_api it's natural to ask if they
are always contiguous (no NULL pointers in between). Yes, they are in
all cases so far, so make use of the already present tcf_act_for_each_action
macro to explicitly document this assumption.
There was an instance where it was not, but it was refactorable (patch 2)
to make the array contiguous.
v1->v2:
- Respin
- Added Jamal's acked-by
====================
Link: https://lore.kernel.org/r/20231201175015.214214-1-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The actions array is contiguous, so stop processing whenever a NULL
is found. This is already the assumption for tcf_action_destroy[1],
which is called from tcf_actions_init.
[1] https://elixir.bootlin.com/linux/v6.7-rc3/source/net/sched/act_api.c#L1115
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ops array is contiguous, so stop processing whenever a NULL is found
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In tcf_action_add, when putting the reference for the bound actions
it assigns NULLs to just created actions passing a non contiguous
array to tcf_action_put_many.
Refactor the code so the actions array is always contiguous.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the auxiliary macro tcf_act_for_each_action in all the
functions that expect a contiguous action array
Suggested-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove CONFIG_SLAB, CONFIG_DEBUG_SLAB, CONFIG_SLAB_DEPRECATED and
everything in Kconfig files and mm/Makefile that depends on those. Since
SLUB is the only remaining allocator, remove the allocator choice, make
CONFIG_SLUB a "def_bool y" for now and remove all explicit dependencies
on SLUB or SLAB as it's now always enabled. Make every option's verbose
name and description refer to "the slab allocator" without refering to
the specific implementation. Do not rename the CONFIG_ option names yet.
Everything under #ifdef CONFIG_SLAB, and mm/slab.c is now dead code, all
code under #ifdef CONFIG_SLUB is now always compiled.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The SLAB implementation is going to be removed, and mm-api.rst currently
uses mm/slab.c to obtain kerneldocs for some API functions. Switch it to
mm/slub.c and move the relevant kerneldocs of exported functions from
one to the other. The rest of kerneldocs in slab.c is for static SLAB
implementation-specific functions that don't have counterparts in slub.c
and thus can be simply removed with the implementation.
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
