Commit graph

1,335,540 commits

Author SHA1 Message Date
Sebastian Reichel
c62d8fdb27 arm64: dts: rockchip: Enable HDMI receiver on rock-5b
The Rock 5B has a Micro HDMI port, which can be used for receiving
HDMI data. This enables support for it.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20250307091857.646581-3-dmitry.osipenko@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08 17:58:24 +01:00
Shreeya Patel
0327238991 arm64: dts: rockchip: Add device tree support for HDMI RX Controller
Add device tree support for Synopsys DesignWare HDMI RX
Controller.

Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Co-developed-by: Dingxian Wen <shawn.wen@rock-chips.com>
Signed-off-by: Dingxian Wen <shawn.wen@rock-chips.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20250307091857.646581-2-dmitry.osipenko@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08 17:58:23 +01:00
Chukun Pan
61a05d8ca3 arm64: dts: rockchip: Add rk3528 QoS register node
The Quality-of-Service (QsS) node stores/restores specific
register contents when the power domains is turned off/on.
Add QoS node so that they can connect to the power domain.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250306123809.273655-3-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08 17:49:42 +01:00
Chukun Pan
19a634195c dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
Document rk3528 compatible for QoS registers.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250306123809.273655-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08 17:49:42 +01:00
Patrick Wildt
5324af2d02 arm64: dts: rockchip: add MNT Reform 2 laptop
MNT Reform 2 is an open source laptop with replaceable CPU modules,
including a version with the RK3588-based MNT RCORE[1], which is based
on Firefly's iCore-3588Q SoM:

- Rockchip RK3588
- Quad A76 and Quad A55 CPU
- 6 TOPS NPU
- up to 32GB LPDDR4x RAM
- SD Card slot
- Gigabit ethernet port
- HDMI port
- 2x mPCIe ports for WiFi or NVMe
- 3x USB 3.0 Type-A HOST port

[1] https://shop.mntre.com/products/mnt-reform

Co-developed-by: "Lukas F. Hartmann" <lukas@mntre.com>
Signed-off-by: "Lukas F. Hartmann" <lukas@mntre.com>
Signed-off-by: Patrick Wildt <patrick@blueri.se>
Link: https://lore.kernel.org/r/Z8S6uDM634KJuyKP@windev.fritz.box
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-06 14:42:22 +01:00
Patrick Wildt
3bf4fc44c6 dt-bindings: arm: rockchip: Add MNT Reform 2 (RCORE)
Document board compatible bindings for the MNT Reform 2 with it's RCORE
SoM, which is based on Firefly's iCore-3588Q.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/Z8S5SHqUqKYiT6Wd@windev.fritz.box
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-06 14:41:21 +01:00
Yao Zi
8f814d7c9f dt-bindings: soc: rockchip: Add RK3528 VPU GRF syscon
Add compatible string for VPU GRF found on RK3528 SoC.

Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250305194217.47052-3-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-06 14:11:54 +01:00
Yao Zi
efc1bc1f36 dt-bindings: soc: rockchip: Add RK3528 VO GRF syscon
Add compatible string for VO GRF found on RK3528 SoC.

Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250305194217.47052-2-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-06 14:11:54 +01:00
Andy Yan
7641678ecb arm64: dts: rockchip: Enable hdmi out display for rk3576-evb-v10
Enable vop and hdmi on rk3576 evb1, so we can get a display output
on this board now.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20250305025128.479245-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-06 10:38:10 +01:00
Andy Yan
2062b91b9f arm64: dts: rockchip: Enable hdmi display on sige5
Enable hdmi display on sige5 board.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20241231095728.253943-4-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04 21:43:31 +01:00
Andy Yan
ad0ea230ab arm64: dts: rockchip: Add hdmi for rk3576
Add hdmi and it's phy dt node for rk3576.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20241231095728.253943-3-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04 21:43:31 +01:00
Andy Yan
d74b842cab arm64: dts: rockchip: Add vop for rk3576
Add VOP and VOP_MMU found on rk3576.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20241231095728.253943-2-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04 21:43:31 +01:00
Krzysztof Kozlowski
ced36c336d arm64: dts: rockchip: Add ES8388 audio codec fallback on RK3588 boards
Devicetree bindings for ES8388 audio codec expect the device to be
marked as compatible with ES8328.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250304104200.76178-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04 15:32:28 +01:00
Krzysztof Kozlowski
d83f6c32d7 arm64: dts: rockchip: Add ES8388 audio codec fallback on RK3399 ROC PC PLUS
Devicetree bindings for ES8388 audio codec expect the device to be
marked as compatible with ES8328.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250304104200.76178-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04 15:32:27 +01:00
Jonas Karlman
0d2312f0d3 arm64: dts: rockchip: Add uart0 pinctrl to Radxa E20C
Radxa E20C route UART0 M0 pins (GPIO4_C7 and GPIO4_D0) to the onboard
CH340B for debug console use.

Add pinctrl for UART0 M0 pins used for serial console.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250228064024.3200000-6-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04 12:53:58 +01:00
Jonas Karlman
a31fad19ae arm64: dts: rockchip: Add pinctrl and gpio nodes for RK3528
Add pinctrl and gpio nodes for RK3528 and import rk3528-pinctrl.dtsi
from vendor linux-6.1-stan-rkr5 kernel with the hdmi-pins-idle node
removed due to missing label reference to pcfg_output_low_pull_down.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250228064024.3200000-5-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04 12:53:58 +01:00
Jonas Karlman
ac32ad07a9 dt-bindings: soc: rockchip: Add RK3528 ioc grf syscon
The GPIO is accessible via ioc grf syscon registers on RK3528.

Add compatible string for RK3528 ioc grf syscon.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250228064024.3200000-2-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04 12:53:58 +01:00
Heiko Stuebner
c55c9e91d1 arm64: dts: rockchip: add usb typec host support to rk3588-jaguar
Jaguar has two type-c ports connected to fusb302 controllers that can
work both in host and device mode and can also run in display-port
altmode.

While these ports can work in dual-role data mode, they do not support
powering the device itself as power-sink. This causes issues because
the current infrastructure does not cope well with dual-role data
without dual-role power.

So add the necessary nodes for the type-c controllers as well as enable
the relevant core usb nodes. So far host modes works reliably, but
device-mode does not. So devicemode needs more investigation.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250228150853.329175-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-28 22:42:46 +01:00
Sebastian Reichel
f94500eb73 arm64: dts: rockchip: Add GPU power domain regulator dependency for RK3588
Enabling the GPU power domain requires that the GPU regulator is
enabled. The regulator is enabled at boot time, but gets disabled
automatically when there are no users.

This means the system might run into a failure state hanging the
whole system for the following use cases:

 * if the GPU driver is being probed late (e.g. build as a
   module and firmware is not in initramfs), the regulator
   might already have been disabled. In that case the power
   domain is enabled before the regulator.
 * unbinding the GPU driver will disable the PM domain and
   the regulator. When the driver is bound again, the PM
   domain will be enabled before the regulator and error
   appears.

Avoid this by adding an explicit regulator dependency to the
power domain.

Tested-by: Heiko Stuebner <heiko@sntech.de>
Reported-by: Adrián Martínez Larumbe <adrian.larumbe@collabora.com>
Tested-by: Adrian Larumbe <adrian.larumbe@collabora.com> # On Rock 5B
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250220-rk3588-gpu-pwr-domain-regulator-v6-8-a4f9c24e5b81@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-28 14:44:49 +01:00
Jimmy Hon
254324dbe3 arm64: dts: rockchip: Enable HDMI1 audio output for Orange Pi 5 Ultra
HDMI audio is available on the Orange Pi 5 Ultra HDMI1 TX port.

Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250222193332.1761-6-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27 14:36:07 +01:00
Jimmy Hon
efdc4018f3 arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Ultra
Enable the only HDMI output port on the Orange Pi 5 Ultra

Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Tested-By: Johannes Erdfelt <johannes@erdfelt.com>
Link: https://lore.kernel.org/r/20250222193332.1761-5-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27 14:36:06 +01:00
Jimmy Hon
3df28b6fda arm64: dts: rockchip: Add Orange Pi 5 Ultra board
The RK3588 Single Board Computer includes
- eMMC
- microSD
- UART
- 2 PWM LEDs
- RTC
- RTL8125 network controller on PCIe 2.0x1.
- M.2 M-key connector routed to PCIe 3.0x4
- PWM controlled heat sink fan.
- 2 USB2 ports
- lower USB3 port
- upper USB3 port with OTG capability
- Mali GPU
- SPI NOR flash
- Mask Rom button
- Analog audio using es8388 codec via the headset jack and onboard mic
- HDMI1
- HDMI IN

the vcc5v0_usb30 regulator shares the same enable gpio pin as the
vcc5v0_usb20 regulator.

The Orange Pi 5 Ultra is a single board computer powered by the Rockchip
RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped
for HDMI IN.

Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Tested-By: Johannes Erdfelt <johannes@erdfelt.com>
Link: https://lore.kernel.org/r/20250222193332.1761-4-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27 14:36:06 +01:00
Jimmy Hon
f36f2ae1fe dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Ultra
Add devicetree binding for the Xunlong Orange Pi 5 Ultra board.

The Orange Pi 5 Ultra is a single board computer powered by the Rockchip
RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped
for HDMI IN.

Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250222193332.1761-3-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27 14:36:06 +01:00
Jimmy Hon
6864a17614 arm64: dts: rockchip: Adapt to differences between Orange Pi 5 Max and Ultra
The Orange Pi 5 Plus and Orange Pi 5 Max have 2SK3018s attached to the
PWM LEDs. The Orange Pi 5 Ultra does not, and thus needs the PWM
polarity inverted.

Also remove the model/compatible from the dtsi. It should be at the
board level only.

Fixes: c600d252dc ("arm64: dts: rockchip: Add Orange Pi 5 Max board")
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250222193332.1761-2-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27 14:36:06 +01:00
Jianfeng Liu
3eac9319af arm64: dts: rockchip: add hdmi1 support to ROCK 5 ITX
Enable the HDMI port next to ethernet port.

Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Link: https://lore.kernel.org/r/20250225030904.2813023-1-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27 14:09:32 +01:00
Detlev Casanova
97aa62ed1e arm64: dts: rockchip: Enable HDMI audio outputs for Rock 5B
HDMI audio is available on the Rock 5B HDMI TX ports.
Enable it for both ports.

Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Fixes: 419d191810 ("ASoC: simple-card-utils: use __free(device_node) for device node")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20250217215641.372723-4-detlev.casanova@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27 13:04:38 +01:00
Detlev Casanova
b8c6c13697 arm64: dts: rockchip: Add HDMI audio outputs for rk3588
For hdmi0_sound, use the simple-audio-card driver with the hdmi0 QP node
as CODEC and the i2s5 device as CPU.

Similarly for hdmi1_sound, the CODEC is the hdmi1 node and the CPU is
i2s6, but only added in the rk3588-extra.dtsi device tree as the second
TX HDMI port is not available on base versions of the SoC.

The simple-audio-card,mclk-fs value is set to 128 as it is done in
the downstream driver.

The #sound-dai-cells value is set to 0 in the hdmi0 and hdmi1 nodes so
that they can be used as audio codec nodes.

Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # RK3588 Tiger Haikou
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Fixes: 419d191810 ("ASoC: simple-card-utils: use __free(device_node) for device node")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20250217215641.372723-3-detlev.casanova@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27 13:04:38 +01:00
Cristian Ciocaltea
5c2d6181ae arm64: dts: rockchip: Enable HDMI1 on rk3588-evb1
Add the necessary DT changes to enable the second HDMI output port on
Rockchip RK3588 EVB1.

While at it, switch the position of &vop_mmu and @vop to maintain the
alphabetical order.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250223-vop2-hdmi1-disp-modes-v2-5-f4cec5e06fbe@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27 13:02:36 +01:00
Cristian Ciocaltea
b2e668a60e arm64: dts: rockchip: Add HDMI1 PHY PLL clock source to VOP2 on RK3588
VOP2 on RK3588 is able to use the HDMI PHY PLL as an alternative and
more accurate pixel clock source to improve handling of display modes up
to 4K@60Hz on video ports 0, 1 and 2.

The HDMI1 PHY PLL clock source cannot be added directly to vop node in
rk3588-base.dtsi, along with the HDMI0 related one, because HDMI1 is an
optional feature and its PHY node belongs to a separate (extra) DT file.

Therefore, add the HDMI1 PHY PLL clock source to VOP2 by overwriting its
clocks & clock-names properties in the extra DT file.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250223-vop2-hdmi1-disp-modes-v2-4-f4cec5e06fbe@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27 13:02:36 +01:00
Cristian Ciocaltea
aadaa27956 arm64: dts: rockchip: Enable HDMI1 PHY clk provider on RK3588
Since commit c4b09c5620 ("phy: phy-rockchip-samsung-hdptx: Add clock
provider support"), the HDMI PHY PLL can be used as an alternative and
more accurate pixel clock source for VOP2 to improve display modes
handling on RK3588 SoC.

Add the missing #clock-cells property to allow using the clock provider
functionality of HDMI1 PHY.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250223-vop2-hdmi1-disp-modes-v2-3-f4cec5e06fbe@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27 13:02:36 +01:00
Andy Yan
a3b3b57ec9 arm64: dts: rockchip: Enable USB3 OTG on rk3588s Cool Pi 4B
Enable USB3 OTG and it's related PHY node. And the PHY will
also be shared with the upcoming DisplayPort controller.

Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20250223100757.73531-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-26 22:45:15 +01:00
Yao Zi
b9454434d0 arm64: dts: rockchip: Add UART clocks for RK3528 SoC
Add missing clocks in UART nodes for RK3528 SoC.

Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250217061142.38480-10-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-26 18:47:50 +01:00
Yao Zi
858cdcdd11 arm64: dts: rockchip: Add clock generators for RK3528 SoC
Add dt node for RK3528 clock and reset unit. Clock "gmac0_clk" is
generated by internal Ethernet phy, a fixed clock node is added as a
placeholder to avoid orphans.

Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250217061142.38480-9-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-26 18:47:50 +01:00
Heiko Stuebner
9eb0e31b40 Merge branch 'v6.15-shared/clkids' into v6.15-armsoc/dts64 2025-02-26 18:47:17 +01:00
Yao Zi
e0c0a97bc3 dt-bindings: clock: Document clock and reset unit of RK3528
There are two types of clocks in RK3528 SoC, CRU-managed and
SCMI-managed. Independent IDs are assigned to them.

For the reset part, differing from previous Rockchip SoCs and
downstream bindings which embeds register offsets into the IDs, gapless
numbers starting from zero are used.

Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250217061142.38480-6-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-26 18:04:00 +01:00
Quentin Schulz
5c349537e2 arm64: dts: rockchip: disable I2C2 bus by default on RK3588 Tiger
RK3588 Tiger routes I2C2 signals to the Q7 Camera FFC connector (P2) but
nothing on the SoM itself is on that bus, therefore it'll be up to the
adapter connected to the Q7 Camera FFC connector (P2) to enable the I2C2
controller, if need be.

Thus, disable it by default.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-9-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-23 00:44:38 +01:00
Quentin Schulz
83c247e2bc arm64: dts: rockchip: enable I2C3 in Haikou carrierboard, not Ringneck DTSI
PX30 Ringneck only exposes I2C3 as LVDS_BLC_CLK/DAT on Q7 golden fingers
but nothing is on that bus on the SoM itself. Therefore, let's enable
the I2C3 bus where it makes sense, in the Haikou carrierboard DTS.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-8-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-23 00:44:37 +01:00
Quentin Schulz
f65f71a4c3 arm64: dts: rockchip: enable Ethernet in Haikou carrierboard, not Puma DTSI
The signals are exposed on Q7 golden fingers but it's not a given that
the carrierboard will have an Ethernet jack. So let's move the enabling
of the Ethernet controller to the carrierboard DTS instead.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-7-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-23 00:44:37 +01:00
Quentin Schulz
ef32404f99 arm64: dts: rockchip: add EEPROM found on RK3399 Puma Haikou
The Haikou carrierboard has an EEPROM on LVDS_BLC_CLK/DAT which are
signals that can carry either I2C or be used as HPD for eDP0/1.

Only eDP0 is routed from RK3399 Puma SoM but only exposed on Haikou
through the Video Connector, a fake PCIe connector. So to be able to use
eDP one would need to use a Device Tree overlay. Therefore, let's
default to having an EEPROM in Haikou carrierboard DTS.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-6-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-23 00:44:37 +01:00
Quentin Schulz
4a77f317c2 arm64: dts: rockchip: enable I2S0 in Haikou carrierboard, not Puma DTSI
I2S0 is routed to the Q7 golden fingers and, on Haikou carrierboard, to
an I2S codec. Nothing aside from signal routing is done on the SoM,
therefore it's the duty of the carrierboard to enable I2S0 whenever an
I2S codec is present.

Such is the case of the Haikou carrierboard, therefore let's migrate the
enabling of this controller to the carrierboard DTS instead of the SoM
DTSI.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-5-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-23 00:44:37 +01:00
Quentin Schulz
f6fd2c1aa4 arm64: dts: rockchip: disable I2C6 on Puma DTSI
The bus is only exposed on Q7 Camera FFC connector which accepts
external adapters such as Q7 Camera Demo.

The enabling of I2C6 should therefore be done in the adapter Device Tree
Overlay and not in the SoM DTSI, so let's disable it by default.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-4-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-23 00:44:37 +01:00
Quentin Schulz
52398b8bfa arm64: dts: rockchip: move I2C6 from Haikou carrierboard to Puma DTSI
I2C6 is not exposed on Q7 golden fingers which is for routing signals to
the carrierboard but on Q7 Camera connector, for routing signals to an
additional adapter (e.g. Q7 Camera Demo adapter).

Therefore, let's move the modification of I2C6 bus to Puma DTSI.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-3-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-23 00:44:37 +01:00
Quentin Schulz
64f6ad17eb arm64: dts: rockchip: move DDC bus from Haikou carrierboard to RK3399 Puma DTSI
The DDC bus is necessarily on I2C3, that's how it's exposed by RK3399
Puma on the Q7 golden fingers, so let's move it to the SoM DTSI instead.

If the carrierboard doesn't route it for some reason, /delete-property/
can be used to remove it.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-2-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-23 00:44:37 +01:00
Quentin Schulz
62deeee289 arm64: dts: rockchip: enable UART5 on RK3588 Tiger Haikou
In its default configuration (SW2 on "UART1"), UART5 is exposed on the
DB9 RS232/RS485 connector. While the same signals are also exposed on
Q7_GPIO5 and Q7_GPIO6, a GPIO header, and thus could be used for other
purposes, RK3399 Puma Haikou and PX30 Ringneck Haikou do enable the UART
controller exposed on the DB9 connector, so let's keep consistency
across our modules and enable it on RK3588 Tiger Haikou by default too.

Add a comment while at it to explicit where this controller is routed
to.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-1-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-23 00:44:37 +01:00
Stephen Chen
a0fb7eca9c arm64: dts: rockchip: Add Radxa ROCK 4D device tree
The Radxa ROCK 4D board is based on the Rockchip rk3576 SoC.

The device tree adds support for basic devices:
 - UART
 - SD Card
 - Ethernet
 - USB
 - RTC

It has 4 USB ports but only 3 are usable as the top left one is used
for maskrom.

It has a USB-C port that is only used for powering the board.

Signed-off-by: Stephen Chen <stephen@radxa.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20250218160714.140709-3-detlev.casanova@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-23 00:44:37 +01:00
Detlev Casanova
64c80e49d0 dt-bindings: arm: rockchip: Add Radxa ROCK 4D board
The board is based on the Rockchip rk3576 SoC.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20250218160714.140709-2-detlev.casanova@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-23 00:44:36 +01:00
Heiko Stuebner
8715d2eeb0 arm64: dts: rockchip: add rk3576 otp node
This adds the otp node to the rk3576 soc devicetree including the
individual fields we know about.

Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250210224510.1194963-7-heiko@sntech.de
2025-02-23 00:44:36 +01:00
Quentin Schulz
066a69db9d arm64: dts: rockchip: add overlay for RK3399 Puma Haikou Video Demo adapter
This adds support for the video-demo-adapter DEVKIT ADDON CAM-TS-A01
(https://embedded.cherry.de/product/development-kit/) for the Haikou
devkit with RK3399 Puma SoM.

The Video Demo adapter is an adapter connected to the fake PCIe slot
labeled "Video Connector" on the Haikou devkit.

Its main feature is a Leadtek DSI-display with touchscreen and a camera
(that is not supported yet because the expected clock rate by the driver
cannot be exactly reached by the clock driver). To drive these
components a number of additional regulators are grouped on the adapter
as well as a PCA9670 gpio-expander to provide the needed additional
gpio-lines.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250221-ringneck-dtbos-v2-5-310c0b9a3909@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-23 00:44:36 +01:00
Quentin Schulz
9f889cf178 arm64: dts: rockchip: add overlay for PX30 Ringneck Haikou Video Demo adapter
This adds support for the video-demo-adapter DEVKIT ADDON CAM-TS-A01
(https://embedded.cherry.de/product/development-kit/) for the Haikou
devkit with PX30 Ringneck SoM.

The Video Demo adapter is an adapter connected to the fake PCIe slot
labeled "Video Connector" on the Haikou devkit.

Itss main feature is a Leadtek DSI-display with touchscreen and a camera
(that is not supported yet because the expected clock rate by the driver
cannot be exactly reached by the clock driver). To drive these
components a number of additional regulators are grouped on the adapter
as well as a PCA9670 gpio-expander to provide the needed additional
gpio-lines.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250221-ringneck-dtbos-v2-4-310c0b9a3909@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-23 00:44:36 +01:00
Quentin Schulz
1444eb8fed arm64: dts: rockchip: add support for HAIKOU-LVDS-9904379 adapter for PX30 Ringneck
The HAIKOU-LVDS-9904379 adapter is an adapter for PX30 Ringneck with the
Haikou carrierboard. It is to be inserted in the fake PCIe slot labelled
Video Connector.

This adapter expects an Admatec 9904379 1024x600 LVDS display with
backlight and touchscreen. An EEPROM is also found on the adapter.

This adds support for this adapter on PX30 Ringneck when inserted in
Haikou carrierboard.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250221-ringneck-dtbos-v2-3-310c0b9a3909@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-23 00:44:36 +01:00