[ Upstream commit 4dd1dda652 ]
il3945_store_measurement() calls il3945_get_measurement() which internally
calls il_send_cmd_sync() without holding il->mutex. However,
il_send_cmd_sync() has lockdep_assert_held(&il->mutex) indicating that
callers must hold this lock.
Other sysfs store functions in the same file properly acquire the mutex:
- il3945_store_flags() acquires mutex at 3945-mac.c:3110
- il3945_store_filter_flags() acquires mutex at 3945-mac.c:3144
Add mutex_lock()/mutex_unlock() around the il3945_get_measurement() call
in the sysfs store function to fix the missing lock protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260125193005.1090429-1-n7l8m4@u.northwestern.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e31fa691d0 ]
il4965_store_tx_power() calls il_set_tx_power() without holding il->mutex.
However, il_set_tx_power() has lockdep_assert_held(&il->mutex) indicating
that callers must hold this lock.
All other callers of il_set_tx_power() properly acquire the mutex:
- il_bg_scan_completed() acquires mutex at common.c:1683
- il_mac_config() acquires mutex at common.c:5006
- il3945_commit_rxon() and il4965_commit_rxon() are called via work
queues that hold the mutex (like il4965_bg_alive_start)
Add mutex_lock()/mutex_unlock() around the il_set_tx_power() call in
the sysfs store function to fix the missing lock protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260125194039.1196488-1-n7l8m4@u.northwestern.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 878406d4d6 ]
Currently, HCLGE_FD_AD_QID has only 10 bits and supports a
maximum of 1023 queues. However, there are actually scenarios
where the queue_id exceeds 1023.
This patch adds an additional bit to HCLGE_FD_AD_QID to ensure
that queue_id greater than 1023 are supported.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260123094756.3718516-2-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4faaf65a7 ]
idev->mr_maxdelay is read and written locklessly,
add READ_ONCE()/WRITE_ONCE() annotations.
While we are at it, make this field an u32.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260122172247.2429403-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fffa44b6e ]
Currently, ext4_zero_range passes EXT4_EX_NOCACHE flag to avoid caching
extents however this is not respected by convert_initialized_extent().
Hence, modify it to accept flags from the caller and to pass the flags
on to other extent manipulation functions it calls. This makes
sure the NOCACHE flag is respected throughout the code path.
Also, we no longer explicitly pass CONVERT_UNWRITTEN as the caller takes
care of this.
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/07008fbb14db727fddcaf4c30e2346c49f6c8fe0.1769149131.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad22d24be6 ]
RDS connections carry a state "rds_conn_path::cp_state"
and transitions from one state to another and are conditional
upon an expected state: "rds_conn_path_transition."
There is one exception to this conditionality, which is
"RDS_CONN_ERROR" that can be enforced by "rds_conn_path_drop"
regardless of what state the condition is currently in.
But as soon as a connection enters state "RDS_CONN_ERROR",
the connection handling code expects it to go through the
shutdown-path.
The RDS/TCP multipath changes added a shortcut out of
"RDS_CONN_ERROR" straight back to "RDS_CONN_CONNECTING"
via "rds_tcp_accept_one_path" (e.g. after "rds_tcp_state_change").
A subsequent "rds_tcp_reset_callbacks" can then transition
the state to "RDS_CONN_RESETTING" with a shutdown-worker queued.
That'll trip up "rds_conn_init_shutdown", which was
never adjusted to handle "RDS_CONN_RESETTING" and subsequently
drops the connection with the dreaded "DR_INV_CONN_STATE",
which leaves "RDS_SHUTDOWN_WORK_QUEUED" on forever.
So we do two things here:
a) Don't shortcut "RDS_CONN_ERROR", but take the longer
path through the shutdown code.
b) Add "RDS_CONN_RESETTING" to the expected states in
"rds_conn_init_shutdown" so that we won't error out
and get stuck, if we ever hit weird state transitions
like this again."
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260122055213.83608-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8da7e88682 ]
This fixes transmit power too low under 2GHz connection. Previously
we missed the settings of 2GHz, add the according calibrated tables.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260117044157.2392958-10-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f6d7a325f ]
During MLO connections, A1 of the probe responses we received are
in link address, these frames will then be dropped by mac80211 due to
not matching the MLD address in ieee80211_scan_accept_presp().
Fix this by using MLD address to scan when not using random MAC address.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260114013950.19704-13-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 833dcd75d5 ]
When the TX queue length reaches the threshold, the netdev watchdog
immediately detects a TX queue timeout.
This patch updates the trans_start timestamp of the transmit queue
on every asynchronous USB URB submission along the transmit path,
ensuring that the network watchdog accurately reflects ongoing
transmission activity.
Signed-off-by: Mingj Ye <insyelu@gmail.com>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://patch.msgid.link/20260120015949.84996-1-insyelu@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dfffa5479 ]
When compiling a driver written for MIPS on OpenRISC that uses the nop()
function, it fails due to the following error:
drivers/watchdog/pic32-wdt.c: Assembler messages:
drivers/watchdog/pic32-wdt.c:125: Error: unrecognized instruction `nop'
The driver currently uses the generic version of nop() from
include/asm-generic/barrier.h:
#ifndef nop
#define nop() asm volatile ("nop")
#endif
Let's fix this on OpenRISC by defining an architecture-specific version
of nop().
This was tested by performing an allmodconfig openrisc cross compile on
an aarch64 host.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601180236.BVy480We-lkp@intel.com/
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 735ee8582d ]
Quoting reporter:
In net/netfilter/xt_tcpmss.c (lines 53-68), the TCP option parser reads
op[i+1] directly without validating the remaining option length.
If the last byte of the option field is not EOL/NOP (0/1), the code attempts
to index op[i+1]. In the case where i + 1 == optlen, this causes an
out-of-bounds read, accessing memory past the optlen boundary
(either reading beyond the stack buffer _opt or the
following payload).
Reported-by: sungzii <sungzii@pm.me>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a49fc8d8a ]
The upstream commit, 71d8c47fc6
("netfilter: conntrack: introduce clash resolution on insertion race"),
sets allow_clash=true in the UDP/UDPLITE protocol handler
but does not set it in the generic protocol handler.
As a result, packets composed of connectionless protocols at each layer,
such as UDP over IP-in-IP, still drop packets due to conflicts during conntrack insertion.
To resolve this, this patch sets allow_clash in the nf_conntrack_l4proto_generic.
Signed-off-by: Yuto Hamaguchi <Hamaguchi.Yuto@da.MitsubishiElectric.co.jp>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01942af95a ]
When performing buffered writes, we may need to split and convert an
unwritten extent into a written one during the end I/O process. However,
we do not reserve space specifically for these metadata changes, we only
reserve 2% of space or 4096 blocks. To address this, we use
EXT4_GET_BLOCKS_PRE_IO to potentially split extents in advance and
EXT4_GET_BLOCKS_METADATA_NOFAIL to utilize reserved space if necessary.
These two approaches can reduce the likelihood of running out of space
and losing data. However, these methods are merely best efforts, we
could still run out of space, and there is not much difference between
converting an extent during the writeback process and the end I/O
process, it won't increase the risk of losing data if we postpone the
conversion.
Therefore, also use EXT4_GET_BLOCKS_METADATA_NOFAIL in
ext4_convert_unwritten_extents_endio() to prepare for the buffered I/O
iomap conversion, which may perform extent conversion during the end I/O
process.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20260105014522.1937690-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f8dd813a1 ]
Fast commits only log operations that have dedicated replay support.
EXT4_IOC_GROUP_EXTEND grows the filesystem to the end of the last
block group and updates the same on-disk metadata without going
through the fast commit tracking paths.
In practice these operations are rare and usually followed by further
updates, but mixing them into a fast commit makes the overall
semantics harder to reason about and risks replay gaps if new call
sites appear.
Teach ext4 to mark the filesystem fast-commit ineligible when
EXT4_IOC_GROUP_EXTEND grows the filesystem.
This forces those transactions to fall back to a full commit,
ensuring that the group extension changes are captured by the normal
journal rather than partially encoded in fast commit TLVs.
This change should not affect common workloads but makes online
resize via GROUP_EXTEND safer and easier to reason about under fast
commit.
Testing:
1. prepare:
dd if=/dev/zero of=/root/fc_resize.img bs=1M count=0 seek=256
mkfs.ext4 -O fast_commit -F /root/fc_resize.img
mkdir -p /mnt/fc_resize && mount -t ext4 -o loop /root/fc_resize.img /mnt/fc_resize
2. Extended the filesystem to the end of the last block group using a
helper that calls EXT4_IOC_GROUP_EXTEND on the mounted filesystem
and checked fc_info:
./group_extend_helper /mnt/fc_resize
cat /proc/fs/ext4/loop0/fc_info
shows the "Resize" ineligible reason increased.
3. Fsynced a file on the resized filesystem and confirmed that the fast
commit ineligible counter incremented for the resize transaction:
touch /mnt/fc_resize/file
/root/fsync_file /mnt/fc_resize/file
sync
cat /proc/fs/ext4/loop0/fc_info
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20251211115146.897420-6-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2705645134 ]
When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the
`DOUBLE_CHECK` macro defined, the following panic is triggered:
==================================================================
EXT4-fs error (device vdc): ext4_validate_block_bitmap:423:
comm mount: bg 0: bad block bitmap checksum
BUG: unable to handle page fault for address: ff110000fa2cc000
PGD 3e01067 P4D 3e02067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W
6.18.0-gba65a4e7120a-dirty #1152 PREEMPT(none)
RIP: 0010:percpu_counter_add_batch+0x13/0xa0
Call Trace:
<TASK>
ext4_mark_group_bitmap_corrupted+0xcb/0xe0
ext4_validate_block_bitmap+0x2a1/0x2f0
ext4_read_block_bitmap+0x33/0x50
mb_group_bb_bitmap_alloc+0x33/0x80
ext4_mb_add_groupinfo+0x190/0x250
ext4_mb_init_backend+0x87/0x290
ext4_mb_init+0x456/0x640
__ext4_fill_super+0x1072/0x1680
ext4_fill_super+0xd3/0x280
get_tree_bdev_flags+0x132/0x1d0
vfs_get_tree+0x29/0xd0
vfs_cmd_create+0x59/0xe0
__do_sys_fsconfig+0x4f6/0x6b0
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
This issue can be reproduced using the following commands:
mkfs.ext4 -F -q -b 1024 /dev/sda 5G
tune2fs -O quota,project /dev/sda
mount /dev/sda /tmp/test
With DOUBLE_CHECK defined, mb_group_bb_bitmap_alloc() reads
and validates the block bitmap. When the validation fails,
ext4_mark_group_bitmap_corrupted() attempts to update
sbi->s_freeclusters_counter. However, this percpu_counter has not been
initialized yet at this point, which leads to the panic described above.
Fix this by moving the execution of ext4_percpu_param_init() to occur
before ext4_mb_init(), ensuring the per-CPU counters are initialized
before they are used.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20251209133116.731350-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89b4336fd5 ]
Fast commits only log operations that have dedicated replay support.
Online resize via EXT4_IOC_GROUP_ADD updates the superblock and group
descriptor metadata without going through the fast commit tracking
paths.
In practice these operations are rare and usually followed by further
updates, but mixing them into a fast commit makes the overall
semantics harder to reason about and risks replay gaps if new call
sites appear.
Teach ext4 to mark the filesystem fast-commit ineligible when
ext4_ioctl_group_add() adds new block groups.
This forces those transactions to fall back to a full commit,
ensuring that the filesystem geometry updates are captured by the
normal journal rather than partially encoded in fast commit TLVs.
This change should not affect common workloads but makes online
resize via GROUP_ADD safer and easier to reason about under fast
commit.
Testing:
1. prepare:
dd if=/dev/zero of=/root/fc_resize.img bs=1M count=0 seek=256
mkfs.ext4 -O fast_commit -F /root/fc_resize.img
mkdir -p /mnt/fc_resize && mount -t ext4 -o loop /root/fc_resize.img /mnt/fc_resize
2. Ran a helper that issues EXT4_IOC_GROUP_ADD on the mounted
filesystem and checked the resize ineligible reason:
./group_add_helper /mnt/fc_resize
cat /proc/fs/ext4/loop0/fc_info
shows "Resize": > 0.
3. Fsynced a file on the resized filesystem and verified that the fast
commit stats report at least one ineligible commit:
touch /mnt/fc_resize/file
/root/fsync_file /mnt/fc_resize/file
sync
cat /proc/fs/ext4/loop0/fc_info
shows fc stats ineligible > 0.
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20251211115146.897420-5-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ade47c974 ]
Add missing READ_ONCE() when reading ipv6.sysctl.flowlabel_reflect,
as its value can be changed under us.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e69fda4d07 ]
According to Wi-Fi Aware (TM) 4.0 specification 2.8, A NAN device can
have one NAN management interface. This applies also to multi radio
devices.
The current code allows a driver to support more than one NAN interface,
if those are not in the same radio.
Fix it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107135129.fdaecec0fe8a.I246b5ba6e9da3ec1481ff197e47f6ce0793d7118@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f852de000 ]
For single pdev device like WCN7850/QCC2072, preferred_hw_mode is
initialized to WMI_HOST_HW_MODE_SINGLE. Later when firmware sends
supported modes to host, each mode is compared with the initial one
and if the priority of the new mode is higher, update the parameter
and store mode capability.
For WCN7850, this does not result in issue, as one of the supported
mode indeed has a higher priority. However the only available mode of
QCC2072 at this stage is WMI_HOST_HW_MODE_SINGLE, which fails the
comparison, hence mode capability is not stored. Subsequently driver
initialization fails.
Fix it by accepting a mode with the same priority.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260112-ath12k-support-qcc2072-v2-4-fc8ce1e43969@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bc8c48de6 ]
STA fails to connect to a 6 GHz AP with the following errors:
ath11k_pci 0000:01:00.0: failed to handle chan list with power type 1
wlp1s0: deauthenticating from c8:a3:e8:dd:41:e3 by local choice (Reason: 3=DEAUTH_LEAVING)
ath11k_reg_handle_chan_list() treats the update as redundant and
returns -EINVAL. That causes the connection attempt to fail.
Avoid unnecessary validation during association. Apply the regulatory
redundant check only when the power type is IEEE80211_REG_UNSET_AP,
which only occurs during core initialization.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Signed-off-by: Qian Zhang <qian.zhang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260108034607.812885-1-qian.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4015b19727 ]
Z16 Gen1 has the wakeup-from-suspend issues from [1] but was never added
to the appropriate quirk list. I've tested this patch on top of 6.18.2,
it fixes the issue for me on 21D4
Mark Pearson provided the other product IDs covering the second Z16 Gen1
and both Z13 Gen1 identifiers. They share the same firmware, and folks
in the bugzilla report do indeed see the problem on Z13.
[1] - https://bugzilla.kernel.org/show_bug.cgi?id=219196
Signed-off-by: Ross Vandegrift <ross@kallisti.us>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/wj7o2kmb7g54stdjvxp2hjqrnutnq3jbf4s2uh4ctvmlxdq7tf@nbkj2ebakhrd
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fd8f953f2 ]
Some APs disconnect clients by sending a Disassociation frame
rather than a Deauthentication frame. Since these frames use
different reason codes in WoWLAN mode, this commit adds support
for handling Disassociation to prevent missed disconnection events.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260110022019.2254969-3-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa2a44d0d2 ]
For beamforming procedure, hardware reserve memory page for CSI response.
The unit of register is (value - 1), so add one accordingly as expected.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260110022019.2254969-7-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2a0cac105 ]
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled.
Signed-off-by: Ankit Soni <Ankit.Soni@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d66676e6ca ]
The function usb_tx_block() submits cardp->tx_urb without ensuring that
any previous transmission on this URB has completed. If a second call
occurs while the URB is still active (e.g. during rapid firmware loading),
usb_submit_urb() detects the active state and triggers a warning:
'URB submitted while active'.
Fix this by enforcing serialization: call usb_kill_urb() before
submitting the new request. This ensures the URB is idle and safe to reuse.
Reported-by: syzbot+67969ab6a2551c27f71b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=67969ab6a2551c27f71b
Signed-off-by: Szymon Wilczek <swilczek.lx@gmail.com>
Link: https://patch.msgid.link/20251221155806.23925-1-swilczek.lx@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 915a5f60ad ]
T99W760 is designed based on Qualcomm SDX35 chip. It use similar
architecture with SDX72/SDX75 chip. So we need to assign initial
link id for this device to make sure network available.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://patch.msgid.link/20260105022646.10630-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df180b1a4c ]
The SMMU CMDQ lock is highly contentious when there are multiple CPUs
issuing commands and the queue is nearly full.
The lock has the following states:
- 0: Unlocked
- >0: Shared lock held with count
- INT_MIN+N: Exclusive lock held, where N is the # of shared waiters
- INT_MIN: Exclusive lock held, no shared waiters
When multiple CPUs are polling for space in the queue, they attempt to
grab the exclusive lock to update the cons pointer from the hardware. If
they fail to get the lock, they will spin until either the cons pointer
is updated by another CPU.
The current code allows the possibility of shared lock starvation
if there is a constant stream of CPUs trying to grab the exclusive lock.
This leads to severe latency issues and soft lockups.
Consider the following scenario where CPU1's attempt to acquire the
shared lock is starved by CPU2 and CPU0 contending for the exclusive
lock.
CPU0 (exclusive) | CPU1 (shared) | CPU2 (exclusive) | `cmdq->lock`
--------------------------------------------------------------------------
trylock() //takes | | | 0
| shared_lock() | | INT_MIN
| fetch_inc() | | INT_MIN
| no return | | INT_MIN + 1
| spins // VAL >= 0 | | INT_MIN + 1
unlock() | spins... | | INT_MIN + 1
set_release(0) | spins... | | 0 see[NOTE]
(done) | (sees 0) | trylock() // takes | 0
| *exits loop* | cmpxchg(0, INT_MIN) | 0
| | *cuts in* | INT_MIN
| cmpxchg(0, 1) | | INT_MIN
| fails // != 0 | | INT_MIN
| spins // VAL >= 0 | | INT_MIN
| *starved* | | INT_MIN
[NOTE] The current code resets the exclusive lock to 0 regardless of the
state of the lock. This causes two problems:
1. It opens the possibility of back-to-back exclusive locks and the
downstream effect of starving shared lock.
2. The count of shared lock waiters are lost.
To mitigate this, we release the exclusive lock by only clearing the sign
bit while retaining the shared lock waiter count as a way to avoid
starving the shared lock waiters.
Also deleted cmpxchg loop while trying to acquire the shared lock as it
is not needed. The waiters can see the positive lock count and proceed
immediately after the exclusive lock is released.
Exclusive lock is not starved in that submitters will try exclusive lock
first when new spaces become available.
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Alexander Grest <Alexander.Grest@microsoft.com>
Signed-off-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b13ef361d4 ]
The -EEXIST error code is reserved by the module loading infrastructure
to indicate that a module is already loaded. When a module's init
function returns -EEXIST, userspace tools like kmod interpret this as
"module already loaded" and treat the operation as successful, returning
0 to the user even though the module initialization actually failed.
This follows the precedent set by commit 54416fd767 ("netfilter:
conntrack: helper: Replace -EEXIST by -EBUSY") which fixed the same
issue in nf_conntrack_helper_register().
Affected modules:
* dm_cache dm_clone dm_integrity dm_mirror dm_multipath dm_pcache
* dm_vdo dm-ps-round-robin dm_historical_service_time dm_io_affinity
* dm_queue_length dm_service_time dm_snapshot
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcac0f23d4 ]
Internally wiphy writes to individual channels in this structure,
so we must not share one static definition of channel list between
multiple device instances, because that causes hard to debug
breakage.
For example, with two rtw88 driven devices in the system, channel
information may get incoherent, preventing channel use.
Copied from commit 0ae36391c8 ("wifi: rtw89: Fix inadverent sharing
of struct ieee80211_supported_band data").
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/e94ad653-2b6d-4284-a33c-8c694f88955b@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ba12401cc ]
Simplify the code by using device managed memory allocations.
This also fixes a memory leak in rtw_register_hw(). The supported bands
were not freed in the error path.
Copied from commit 145df52a86 ("wifi: rtw89: Convert
rtw89_core_set_supported_band to use devm_*").
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1aa7fdef-2d5b-4a31-a4e9-fac8257ed30d@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4de946bdb ]
After recovering from L1, explicitly enable error IMR to ensure next
L1 SER (system error recovery) can work normally.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-6-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41be33d3ef ]
I have some rtl8922ae devices with no permanent mac stored in efuse.
It could be properly saved and/or configured from user tools like
NetworkManager, but it would be desirable to be able to initialize it
somehow to get the device working by default.
So, in the same way as with other devices, if the mac address read from
efuse contains zeros, a random mac address is assigned to at least allow
operation, and the user is warned about this in case any action needs to
be considered.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251126091905.217951-1-jtornosm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77653c327e ]
Add support for Mercusys MU6H AC650 High Gain Wireless Dual Band USB
Adapter V1.30. It is based on RTL8811CU, usb device ID is 2c4e:0105.
Signed-off-by: Hsiu-Ming Chang <cges30901@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251205003245.5762-1-cges30901@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f68fdcdc9 ]
The function rtw_set_dtim_period() accepted an 'int' dtim_period parameter,
while mac80211 provides dtim_period as 'u8' in struct ieee80211_bss_conf.
In IBSS (ad-hoc) mode mac80211 may set dtim_period to 0.
The driver unconditionally wrote (dtim_period - 1) to
REG_DTIM_COUNTER_ROOT, which resulted in 0xFF when dtim_period was 0. This
caused delays in broadcast/multicast traffic processing and issues with
ad-hoc operation.
Convert the function parameter to u8 to match ieee80211_bss_conf and avoid
the underflow by writing 0 when dtim_period is 0.
Link: https://github.com/lwfinger/rtw88/issues/406
Signed-off-by: Roman Peshkichev <roman.peshkichev@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251125180937.22977-1-roman.peshkichev@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9218dc26fd ]
If nlink is maximal for a directory (-1) and inside that directory you
perform a rename for some child directory (not moving from the parent),
then the nlink of the first directory is first incremented and later
decremented. Normally this is fine, but when nlink = -1 this causes a
wrap around to 0, and then drop_nlink issues a warning.
After applying the patch syzbot no longer issues any warnings. I also
ran some basic fs tests to look for any regressions.
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Reported-by: syzbot+9131ddfd7870623b719f@syzkaller.appspotmail.com
Closes: https://syzbot.org/bug?extid=9131ddfd7870623b719f
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb0cfcf265 ]
The jfsIOWait() thread calls try_to_freeze() but lacks set_freezable(),
causing it to remain non-freezable by default. This prevents proper
freezing during system suspend.
Add set_freezable() to make the thread freezable as intended.
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac656d7d7c ]
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=001f, idProduct=0b21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210926172016
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Link: https://patch.msgid.link/TYUPR06MB6217522D0DB6E2C9DF46B56ED265A@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 084d5d4441 ]
ALSA OSS mixer layer calls the kcontrol ops rather individually, and
pending calls might be not always caught at disconnecting the device.
For avoiding the potential UAF scenarios, add sanity checks of the
card disconnection at each entry point of OSS mixer accesses. The
rwsem is taken just before that check, hence the rest context should
be covered by that properly.
Link: https://patch.msgid.link/20260209121212.171430-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac1ff574bb ]
The mute and mic-mute LEDs on HP ENVY x360 Convertible 15-es0xxx
(PCI SSID 103c:88b3) do not work with the current driver.
This model requires a combination of COEFBIT and GPIO fixups to
correctly control the LEDs. Introduce a new fixup function
alc245_fixup_hp_envy_x360_mute_led and add a quirk to apply it.
Signed-off-by: Illia Barbashyn <04baril@gmail.com>
Link: https://patch.msgid.link/20260207221955.24132-1-04baril@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84faa91585 ]
imx_rpmsg_probe() calls snd_soc_find_dai() without holding client_mutex.
However, snd_soc_find_dai() has lockdep_assert_held(&client_mutex)
indicating callers must hold this lock, as the function iterates over the
global component list.
All other callers of snd_soc_find_dai() either hold client_mutex via the
snd_soc_bind_card() path or use the snd_soc_find_dai_with_mutex() wrapper.
Use snd_soc_find_dai_with_mutex() instead to fix the missing lock
protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260205052429.4046903-1-n7l8m4@u.northwestern.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96e041647b ]
The driver currently skips the abort sequence for target mode when serial
engine errors occur. This leads to improper error recovery as the serial
engine may remain in an undefined state without proper cleanup, potentially
causing subsequent operations to fail or behave unpredictably.
Fix this by ensuring the abort sequence and DMA reset always execute during
error recovery, as both are required for proper serial engine error
handling.
Co-developed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204162854.1206323-3-praveen.talari@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16c589567a ]
If there's a mismatch between the DAI links in the machine driver and
the topology, it is possible that the playback/capture widget is not
set, especially in the case of loopback capture for echo reference
where we use the dummy DAI link. Return the error when the widget is not
set to avoid a null pointer dereference like below when the topology is
broken.
RIP: 0010:hda_dai_get_ops.isra.0+0x14/0xa0 [snd_sof_intel_hda_common]
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Mateusz Redzynia <mateuszx.redzynia@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260204081833.16630-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1dccb485c ]
pwrseq_power_on() calls pwrseq_unit_disable() when the
post_enable callback fails. However, this call is outside the
scoped_guard(mutex, &pwrseq->state_lock) block that ends.
pwrseq_unit_disable() has lockdep_assert_held(&pwrseq->state_lock),
which will fail when called from this error path.
Add the scoped_guard block to cover the post_enable callback and its
error handling to ensure the lock is held when pwrseq_unit_disable() is
called.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260130182651.1576579-1-n7l8m4@u.northwestern.edu
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
