[ Upstream commit 9ea16ba6ea ]
By default the amphion decoder will pre-parse 3 frames before starting
to decode the first frame. Alternatively, a block of flush padding data
can be appended to the frame, which will ensure that the decoder can
start decoding immediately after parsing the flush padding data, thus
potentially reducing decoding latency.
This mode was previously only enabled, when the display delay was set to
0. Allow the user to manually toggle the use of that mode via a module
parameter called low_latency, which enables the mode without
changing the display order.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Stable-dep-of: 634c2cd17b ("media: amphion: Remove vpu_vb_is_codecconfig")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a5844227e0 ]
Previously a mutex was added to protect the encoder and decoder context
lists from unexpected changes originating from the SCP IP block, causing
the context pointer to go invalid, resulting in a NULL pointer
dereference in the IPI handler.
Turns out on the MT8173, the VPU IPI handler is called from hard IRQ
context. This causes a big warning from the scheduler. This was first
reported downstream on the ChromeOS kernels, but is also reproducible
on mainline using Fluster with the FFmpeg v4l2m2m decoders. Even though
the actual capture format is not supported, the affected code paths
are triggered.
Since this lock just protects the context list and operations on it are
very fast, it should be OK to switch to a spinlock.
Fixes: 6467cda18c ("media: mediatek: vcodec: adding lock to protect decoder context list")
Fixes: afaaf3a0f6 ("media: mediatek: vcodec: adding lock to protect encoder context list")
Cc: Yunfei Dong <yunfei.dong@mediatek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[ adapted file_to_dec_ctx() and file_to_enc_ctx() helper calls to equivalent fh_to_dec_ctx(file->private_data) and fh_to_enc_ctx(file->private_data) pattern ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0da2ba35c0 ]
Let's properly adjust BALLOON_MIGRATE like the other drivers.
Note that the INFLATE/DEFLATE events are triggered from the core when
enqueueing/dequeueing pages.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251021100606.148294-3-david@redhat.com
Fixes: fe030c9b85 ("powerpc/pseries/cmm: Implement balloon compaction")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 15504b1163 ]
Let's move the removal of the page from the balloon list into the single
caller, to remove the dependency on the PG_isolated flag and clarify
locking requirements.
Note that for now, balloon_page_delete() was used on two paths:
(1) Removing a page from the balloon for deflation through
balloon_page_list_dequeue()
(2) Removing an isolated page from the balloon for migration in the
per-driver migration handlers. Isolated pages were already removed from
the balloon list during isolation.
So instead of relying on the flag, we can just distinguish both cases
directly and handle it accordingly in the caller.
We'll shuffle the operations a bit such that they logically make more
sense (e.g., remove from the list before clearing flags).
In balloon migration functions we can now move the balloon_page_finalize()
out of the balloon lock and perform the finalization just before dropping
the balloon reference.
Document that the page lock is currently required when modifying the
movability aspects of a page; hopefully we can soon decouple this from the
page lock.
Link: https://lkml.kernel.org/r/20250704102524.326966-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 0da2ba35c0 ("powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fb05f992b6 ]
Patch series "mm/migration: rework movable_ops page migration (part 1)",
v2.
In the future, as we decouple "struct page" from "struct folio", pages
that support "non-lru page migration" -- movable_ops page migration such
as memory balloons and zsmalloc -- will no longer be folios. They will
not have ->mapping, ->lru, and likely no refcount and no page lock. But
they will have a type and flags 🙂
This is the first part (other parts not written yet) of decoupling
movable_ops page migration from folio migration.
In this series, we get rid of the ->mapping usage, and start cleaning up
the code + separating it from folio migration.
Migration core will have to be further reworked to not treat movable_ops
pages like folios. This is the first step into that direction.
This patch (of 29):
The core will set PG_isolated only after mops->isolate_page() was called.
In case of the balloon, that is where we will remove it from the balloon
list. So we cannot have isolated pages in the balloon list.
Let's drop this unnecessary check.
Link: https://lkml.kernel.org/r/20250704102524.326966-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 0da2ba35c0 ("powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9583f9d229 ]
caab002d50 ("PCI: brcmstb: Disable L0s component of ASPM if requested")
set PCI_EXP_LNKCAP_ASPM_L1 and (optionally) PCI_EXP_LNKCAP_ASPM_L0S in
PCI_EXP_LNKCAP (aka PCIE_RC_CFG_PRIV1_LINK_CAPABILITY in brcmstb).
But instead of using PCI_EXP_LNKCAP_ASPM_L1 and PCI_EXP_LNKCAP_ASPM_L0S
directly, it used PCIE_LINK_STATE_L1 and PCIE_LINK_STATE_L0S, which are
Linux-created values that only coincidentally matched the PCIe spec.
b478e162f2 ("PCI/ASPM: Consolidate link state defines") later changed
them so they no longer matched the PCIe spec, so the bits ended up in the
wrong place in PCI_EXP_LNKCAP.
Use PCI_EXP_LNKCAP_ASPM_L0S to clear L0s support when there's an
'aspm-no-l0s' property. Rely on brcmstb hardware to advertise L0s and/or
L1 support otherwise.
Fixes: caab002d50 ("PCI: brcmstb: Disable L0s component of ASPM if requested")
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Closes: https://lore.kernel.org/linux-pci/20250925194424.GA2197200@bhelgaas
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[mani: reworded subject and description, added closes tag and CCed stable]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251003170436.1446030-1-james.quinlan@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a364d10ffe ]
By default, the driver relies on the default hardware defined value for the
Max Link Width (MLW) capability. But if the "num-lanes" DT property is
present, assume that the chip's default capability information is incorrect
or undesired, and use the specified value instead.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[mani: reworded the description and comments]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250530224035.41886-3-james.quinlan@broadcom.com
Stable-dep-of: 9583f9d229 ("PCI: brcmstb: Fix disabling L0s capability")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2bae7beda1 ]
The strm->sample_width is not filled during rz_ssi_dai_hw_params(). This
wrong value is used for caching sample_width in struct hw_params_cache.
Fix this issue by replacing 'strm->sample_width'->'params_width(params)'
in rz_ssi_dai_hw_params(). After this drop the variable sample_width
from struct rz_ssi_stream as it is unused.
Cc: stable@kernel.org
Fixes: 4f8cd05a43 ("ASoC: sh: rz-ssi: Add full duplex support")
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114073709.4376-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bcba172793 ]
For some reason we endedup allocating sdw_stream_runtime for every cpu dai,
this has two issues.
1. we never set snd_soc_dai_set_stream for non soundwire dai, which
means there is no way that we can free this, resulting in memory leak
2. startup and shutdown callbacks can be called without
hw_params callback called. This combination results in memory leak
because machine driver sruntime array pointer is only set in hw_params
callback.
Fix this by
1. adding a helper function to get sdw_runtime for substream
which can be used by shutdown callback to get hold of sruntime to free.
2. only allocate sdw_runtime for soundwire dais.
Fixes: d32bac9cb0 ("ASoC: qcom: Add helper for allocating Soundwire stream runtime")
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Steev Klimaszewski <threeway@gmail.com> # Thinkpad X13s
Link: https://patch.msgid.link/20251022143349.1081513-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dc90bbefa7 ]
In the existing definition of sdw_stream_runtime, the 'type' member is
never set and defaults to PCM. To prepare for the BPT/BRA support, we
need to special-case streams and make use of the 'type'.
No functional change for now, the implicit PCM type is now explicit.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: shumingf@realtek.com
Link: https://lore.kernel.org/r/20250227140615.8147-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: bcba172793 ("ASoC: qcom: sdw: fix memory leak for sdw_stream_runtime")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit efae226c2e ]
The functions blk_zone_wplug_handle_reset_or_finish() and
blk_zone_wplug_handle_reset_all() both modify the zone write pointer
offset of zone write plugs that are the target of a reset, reset all or
finish zone management operation. However, these functions do this
modification before the BIO is executed. So if the zone operation fails,
the modified zone write pointer offsets become invalid.
Avoid this by modifying the zone write pointer offset of a zone write
plug that is the target of a zone management operation when the
operation completes. To do so, modify blk_zone_bio_endio() to call the
new function blk_zone_mgmt_bio_endio() which in turn calls the functions
blk_zone_reset_all_bio_endio(), blk_zone_reset_bio_endio() or
blk_zone_finish_bio_endio() depending on the operation of the completed
BIO, to modify a zone write plug write pointer offset accordingly.
These functions are called only if the BIO execution was successful.
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[ adapted bdev_zone_is_seq() check to disk_zone_is_conv() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 52a525011c ]
The full duplex audio starts with half duplex mode and then switch to
full duplex mode (another FIFO reset) when both playback/capture
streams available leading to random audio left/right channel swap
issue. Fix this channel swap issue by detecting the full duplex
condition by populating struct dup variable in startup() callback
and synchronize starting both the play and capture at the same time
in rz_ssi_start().
Cc: stable@kernel.org
Fixes: 4f8cd05a43 ("ASoC: sh: rz-ssi: Add full duplex support")
Co-developed-by: Tony Tang <tony.tang.ks@renesas.com>
Signed-off-by: Tony Tang <tony.tang.ks@renesas.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114073709.4376-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d970eda00 upstream.
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context.
Cc: stable@vger.kernel.org
Fixes: 1dfc2e4611 ("gve: Refactor napi add and remove functions")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20251219102945.2193617-1-hramamurthy@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ea97b76d6 upstream.
The sanity checks in hrtimer_update_function() are expensive for high
frequency usage like in the io/uring code due to locking.
Hide the sanity checks behind CONFIG_PROVE_LOCKING, which has a decent
chance to be enabled on a regular basis for testing.
Fixes: 8f02e3563b ("hrtimers: Introduce hrtimer_update_function()")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/87ikpllali.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6c4e684802 ]
Changes from original commit:
- Adjusted idpf_tx_queue assert size to align with 6.12 struct definition
With the new Tx buffer management scheme, there is no need for all of
the stashing mechanisms, the hash table, the reserve buffer stack, etc.
Remove all of that.
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0c3f135e84 ]
The Tx refillq logic will cause packets to be silently dropped if there
are not enough buffer resources available to send a packet in flow
scheduling mode. Instead, determine how many buffers are needed along
with number of descriptors. Make sure there are enough of both resources
to send the packet, and stop the queue if not.
Fixes: 7292af042b ("idpf: fix a race in txq wakeup")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5f417d5513 ]
Replace the TxQ buffer ring with one large pool/array of buffers (only
for flow scheduling). This eliminates the tag generation and makes it
impossible for a tag to be associated with more than one packet.
The completion tag passed to HW through the descriptor is the index into
the array. That same completion tag is posted back to the driver in the
completion descriptor, and used to index into the array to quickly
retrieve the buffer during cleaning. In this way, the tags are treated
as a fix sized resource. If all tags are in use, no more packets can be
sent on that particular queue (until some are freed up). The tag pool
size is 64K since the completion tag width is 16 bits.
For each packet, the driver pulls a free tag from the refillq to get the
next free buffer index. When cleaning is complete, the tag is posted
back to the refillq. A multi-frag packet spans multiple buffers in the
driver, therefore it uses multiple buffer indexes/tags from the pool.
Each frag pulls from the refillq to get the next free buffer index.
These are tracked in a next_buf field that replaces the completion tag
field in the buffer struct. This chains the buffers together so that the
packet can be cleaned from the starting completion tag taken from the
completion descriptor, then from the next_buf field for each subsequent
buffer.
In case of a dma_mapping_error occurs or the refillq runs out of free
buf_ids, the packet will execute the rollback error path. This unmaps
any buffers previously mapped for the packet. Since several free
buf_ids could have already been pulled from the refillq, we need to
restore its original state as well. Otherwise, the buf_ids/tags
will be leaked and not used again until the queue is reallocated.
Descriptor completions only advance the descriptor ring index to "clean"
the descriptors. The packet completions only clean the buffers
associated with the given packet completion tag and do not update the
descriptor ring index.
When operating in queue based scheduling mode, the array still acts as a
ring and will only have TxQ descriptor count entries. The tx_bufs are
still associated 1:1 with the descriptor ring entries and we can use the
conventional indexing mechanisms.
Fixes: c2d548cad1 ("idpf: add TX splitq napi poll support")
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b61dfa9bc4 ]
Move (and rename) the existing rollback logic to singleq.c since that
will be the only consumer. Create a simplified splitq specific rollback
function to loop through and unmap tx_bufs based on the completion tag.
This is critical before replacing the Tx buffer ring with the buffer
pool since the previous rollback indexing will not work to unmap the
chained buffers from the pool.
Cache the next_to_use index before any portion of the packet is put on
the descriptor ring. In case of an error, the rollback will bump tail to
the correct next_to_use value. Because the splitq path now supports
different types of context descriptors (and potentially multiple in the
future), this will take care of rolling back any and all context
descriptors encoded on the ring for the erroneous packet. The previous
rollback logic was broken for PTP packets since it would not account for
the PTP context descriptor.
Fixes: 1a49cf814f ("idpf: add Tx timestamp flows")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f2d18e1647 ]
Track the gap between next_to_use and the last RE index. Set RE again
if the gap is large enough to ensure RE bit is set frequently. This is
critical before removing the stashing mechanisms because the
opportunistic descriptor ring cleaning from the out-of-order completions
will go away. Previously the descriptors would be "cleaned" by both the
descriptor (RE) completion and the out-of-order completions. Without the
latter, we must ensure the RE bit is set more frequently. Otherwise,
it's theoretically possible for the descriptor ring next_to_clean to
never advance. The previous implementation was dependent on the start
of a packet falling on a 64th index in the descriptor ring, which is not
guaranteed with large packets.
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cb83b559be ]
Changes from original commit:
- Adjusted idpf_tx_queue assert size to align with 6.12 struct definition
In certain production environments, it is possible for completion tags
to collide, meaning N packets with the same completion tag are in flight
at the same time. In this environment, any given Tx queue is effectively
used to send both slower traffic and higher throughput traffic
simultaneously. This is the result of a customer's specific
configuration in the device pipeline, the details of which Intel cannot
provide. This configuration results in a small number of out-of-order
completions, i.e., a small number of packets in flight. The existing
guardrails in the driver only protect against a large number of packets
in flight. The slower flow completions are delayed which causes the
out-of-order completions. The fast flow will continue sending traffic
and generating tags. Because tags are generated on the fly, the fast
flow eventually uses the same tag for a packet that is still in flight
from the slower flow. The driver has no idea which packet it should
clean when it processes the completion with that tag, but it will look
for the packet on the buffer ring before the hash table. If the slower
flow packet completion is processed first, it will end up cleaning the
fast flow packet on the ring prematurely. This leaves the descriptor
ring in a bad state resulting in a crash or Tx timeout.
In summary, generating a tag when a packet is sent can lead to the same
tag being associated with multiple packets. This can lead to resource
leaks, crashes, and/or Tx timeouts.
Before we can replace the tag generation, we need a new mechanism for
the send path to know what tag to use next. The driver will allocate and
initialize a refillq for each TxQ with all of the possible free tag
values. During send, the driver grabs the next free tag from the refillq
from next_to_clean. While cleaning the packet, the clean routine posts
the tag back to the refillq's next_to_use to indicate that it is now
free to use.
This mechanism works exactly the same way as the existing Rx refill
queues, which post the cleaned buffer IDs back to the buffer queue to be
reposted to HW. Since we're using the refillqs for both Rx and Tx now,
genericize some of the existing refillq support.
Note: the refillqs will not be used yet. This is only demonstrating how
they will be used to pass free tags back to the send path.
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0c1683c681 ]
There is a race condition between exiting wb_on_itr and completion write
backs. For example, we are in wb_on_itr mode and a Tx completion is
generated by HW, ready to be written back, as we are re-enabling
interrupts:
HW SW
| |
| | idpf_tx_splitq_clean_all
| | napi_complete_done
| |
| tx_completion_wb | idpf_vport_intr_update_itr_ena_irq
That tx_completion_wb happens before the vector is fully re-enabled.
Continuing with this example, it is a UDP stream and the
tx_completion_wb is the last one in the flow (there are no rx packets).
Because the HW generated the completion before the interrupt is fully
enabled, the HW will not fire the interrupt once the timer expires and
the write back will not happen. NAPI poll won't be called. We have
indicated we're back in interrupt mode but nothing else will trigger the
interrupt. Therefore, the completion goes unprocessed, triggering a Tx
timeout.
To mitigate this, fire a SW triggered interrupt upon exiting wb_on_itr.
This interrupt will catch the rogue completion and avoid the timeout.
Add logic to set the appropriate bits in the vector's dyn_ctl register.
Fixes: 9c4a27da0e ("idpf: enable WB_ON_ITR")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 93433c1d91 ]
SW triggered interrupts are guaranteed to fire after their timer
expires, unlike Tx and Rx interrupts which will only fire after the
timer expires _and_ a descriptor write back is available to be processed
by the driver.
Add the necessary fields, defines, and initializations to enable a SW
triggered interrupt in the vector's dyn_ctl register.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8f6571ad47 ]
When the system suspend or resume, the WiFi driver sends
an hif_ctrl command to the firmware and waits for an event.
Due to changes in the event format reported by the chip, the
current mt7925's driver does not account for these changes,
resulting in command timeout. Add flow to handle hif_ctrl
event to avoid command timeout. We also exented API
mt76_connac_mcu_set_hif_suspend for connac3 this time.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Link: https://patch.msgid.link/3a0844ff5162142c4a9f3cf7104f75076ddd3b87.1735910562.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a0f721b8d9 ]
When enter suspend/resume while in a connected state, the upper layer
will trigger disconnection before entering suspend, and at the same time,
it will trigger regd_notifier() and update CLC, causing the CLC event to
not be received due to suspend, resulting in a command timeout.
Therefore, the update of CLC is postponed until resume, to ensure data
consistency and avoid the occurrence of command timeout.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Link: https://patch.msgid.link/bab00a2805d0533fd8beaa059222659858a9dcb5.1735910455.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1b97fc8443 ]
Before entering suspend, we need to ensure that all MCU command are
completed. In some cases, such as with regd_notifier, there is a
chance that CLC commands, will be executed before suspend.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Link: https://patch.msgid.link/3af7b4e5bf7437832b016e32743657d1d55b1f9d.1735910288.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ef6e4db15 upstream.
Commit 0af46fbc33 ("media: i2c: imx219: Calculate crop rectangle
dynamically") meant that the 1920x1080 mode switched from using no
binning to using vertical binning but no horizontal binning, which
resulted in stretched pixels.
Until proper controls are available to independently select horizontal
and vertical binning, restore the original 1:1 pixel aspect ratio by
forcing binning to be uniform in both directions.
Cc: stable@vger.kernel.org
Fixes: 0af46fbc33 ("media: i2c: imx219: Calculate crop rectangle dynamically")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d17104506 upstream.
All microcode patches up to the proper BIOS Entrysign fix are loaded
only after the sha256 signature carried in the driver has been verified.
Microcode patches after the Entrysign fix has been applied, do not need
that signature verification anymore.
In order to not abandon machines which haven't received the BIOS update
yet, add the capability to select which microcode patch to load.
The corresponding microcode container supplied through firmware-linux
has been modified to carry two patches per CPU type
(family/model/stepping) so that the proper one gets selected.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Waiman Long <longman@redhat.com>
Link: https://patch.msgid.link/20251027133818.4363-1-bp@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f54151148b upstream.
During restoring sysfs fwnode information the information of_node_reused
was dropped. This was previously set by device_set_of_node_from_dev().
Add it back manually
Fixes: 24ec03cc55 ("serial: core: Restore sysfs fwnode information")
Cc: stable <stable@kernel.org>
Suggested-by: Cosmin Tanislav <demonsingur@gmail.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Michael Walle <mwalle@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Cosmin Tanislav <demonsingur@gmail.com>
Link: https://patch.msgid.link/20251219152813.1893982-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 99a2ace61b ]
Use RCU to protect accesses to dst->dev from sk_setup_caps()
and sk_dst_gso_max_size().
Also use dst_dev_rcu() in ip6_dst_mtu_maybe_forward(),
and ip_dst_mtu_maybe_forward().
ip4_dst_hoplimit() can use dst_dev_net_rcu().
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250828195823.3958522-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Harshit: Backport to 6.12.y, resolve conflict due to missing commit:
22d6c9eebf ("net: Unexport shared functions for DCCP.") in 6.12.y]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1caf272972 ]
Use the new helper as a step to deal with potential dst->dev races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Harshit: Backport to 6.12.y, pulled this is a prerequisite]
Stable-dep-of: 99a2ace61b ("net: use dst_dev_rcu() in sk_setup_caps()")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d55acb9732 ]
Be consistent and use the same terminology as other lwt users: orig_dst
is the dst_entry before the transformation, while dst is either the
dst_entry in the cache or the dst_entry after the transformation
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250415112554.23823-2-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[Harshit: Backport to 6.12.y]
Stable-dep-of: 99a2ace61b ("net: use dst_dev_rcu() in sk_setup_caps()")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 576c930e5e ]
The shmem layer zeroes out the new pages using cached mappings, and if
we don't CPU-flush we might leave dirty cachelines behind, leading to
potential data leaks and/or asynchronous buffer corruption when dirty
cachelines are evicted.
Fixes: 8a1cc07578 ("drm/panthor: Add GEM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251107171214.1186299-1-boris.brezillon@collabora.com
[Harshit: Resolve conflicts due to missing commit: fe69a39180
("drm/panthor: Fix UAF in panthor_gem_create_with_handle() debugfs
code") in 6.12.y]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3db4404435 ]
raid10_handle_discard should wait barrier before returning a discard bio
which has REQ_NOWAIT. And there is no need to print warning calltrace
if a discard bio has REQ_NOWAIT flag. Quality engineer usually checks
dmesg and reports error if dmesg has warning/error calltrace.
Fixes: c9aa889b03 ("md: raid10 add nowait support")
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/linux-raid/20250306094938.48952-1-xni@redhat.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
[Harshit: Clean backport to 6.12.y]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 90918e3b64 ]
Sequence adjustment may be required for FTP traffic with PASV/EPSV modes.
due to need to re-write packet payload (IP, port) on the ftp control
connection. This can require changes to the TCP length and expected
seq / ack_seq.
The easiest way to reproduce this issue is with PASV mode.
Example ruleset:
table inet ftp_nat {
ct helper ftp_helper {
type "ftp" protocol tcp
l3proto inet
}
chain prerouting {
type filter hook prerouting priority 0; policy accept;
tcp dport 21 ct state new ct helper set "ftp_helper"
}
}
table ip nat {
chain prerouting {
type nat hook prerouting priority -100; policy accept;
tcp dport 21 dnat ip prefix to ip daddr map {
192.168.100.1 : 192.168.13.2/32 }
}
chain postrouting {
type nat hook postrouting priority 100 ; policy accept;
tcp sport 21 snat ip prefix to ip saddr map {
192.168.13.2 : 192.168.100.1/32 }
}
}
Note that the ftp helper gets assigned *after* the dnat setup.
The inverse (nat after helper assign) is handled by an existing
check in nf_nat_setup_info() and will not show the problem.
Topoloy:
+-------------------+ +----------------------------------+
| FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 |
+-------------------+ +----------------------------------+
|
+-----------------------+
| Client: 192.168.100.2 |
+-----------------------+
ftp nat changes do not work as expected in this case:
Connected to 192.168.100.1.
[..]
ftp> epsv
EPSV/EPRT on IPv4 off.
ftp> ls
227 Entering passive mode (192,168,100,1,209,129).
421 Service not available, remote server has closed connection.
Kernel logs:
Missing nfct_seqadj_ext_add() setup call
WARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41
[..]
__nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat]
nf_nat_ftp+0x142/0x280 [nf_nat_ftp]
help+0x4d1/0x880 [nf_conntrack_ftp]
nf_confirm+0x122/0x2e0 [nf_conntrack]
nf_hook_slow+0x3c/0xb0
..
Fix this by adding the required extension when a conntrack helper is assigned
to a connection that has a nat binding.
Fixes: 1a64edf54f ("netfilter: nft_ct: add helper set support")
Signed-off-by: Andrii Melnychenko <a.melnychenko@vyos.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
[Harshit: Clean cherry-pick, apply it to stable-6.12.y]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 23800ad126 ]
The ASUS ProArt PX13 has a spurious wakeup event from the touchpad
a few moments after entering hardware sleep. This can be avoided
by preventing the touchpad from being a wake source.
Add to the wakeup ignore list.
Reported-by: Amit Chaudhari <amitchaudhari@mac.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4482
Tested-by: Amit Chaudhari <amitchaudhari@mac.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/20250814183430.3887973-1-superm1@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9ab29ed505 ]
It is reported that on Acer Nitro V15 suspend only works properly if the
keyboard backlight is turned off. In looking through the issue Acer Nitro
V15 has a GPIO (#8) specified in _AEI but it has no matching notify device
in _EVT. The values for GPIO #8 change as keyboard backlight is turned on
and off.
This makes it seem that GPIO #8 is actually supposed to be solely for
keyboard backlight. Turning off the interrupt for this GPIO fixes the issue.
Add a quirk that does just that.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4169
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Mika Westerberg <westeri@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 92dc572852 ]
The gpiolib-acpi.c is huge enough even without DMI quirks.
Move them to a separate file for a better maintenance.
No functional change intended.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5666a8777a ]
Add acpi_gpio_need_run_edge_events_on_boot() getter which moves
towards isolating the GPIO ACPI and quirk APIs. It will helps
splitting them completely in the next changes.
No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a594877663 ]
Introduce a new API and handle deferred list via it which moves
towards isolating the GPIO ACPI and quirk APIs. It will helps
splitting them completely in the next changes.
No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b24fd5bc8e ]
Switch to use enum instead of pointers in acpi_gpio_in_ignore_list()
which moves towards isolating the GPIO ACPI and quirk APIs. It will
helps splitting them completely in the next changes.
No functional changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 2d967310c4 ("gpiolib: acpi: Add quirk for Dell Precision 7780")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4bc3477796 ]
During f2fs_enable_checkpoint() in remount(), if we flush a large
amount of dirty pages into slow device, it may take long time which
will block write IO, let's add a timeout machanism during dirty
pages flush to avoid long time block in f2fs_enable_checkpoint().
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: be112e7449 ("f2fs: fix to propagate error from f2fs_enable_checkpoint()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f88c7904b5 ]
SBI_POR_DOING can be cleared after recovery is completed, so that
changes made before recovery can be persistent, and subsequent
errors can be recorded into cp/sb.
Signed-off-by: Song Feng <songfeng@oppo.com>
Signed-off-by: Yongpeng Yang <yangyongpeng1@oppo.com>
Signed-off-by: Sheng Yong <shengyong@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: be112e7449 ("f2fs: fix to propagate error from f2fs_enable_checkpoint()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 267ee93c41 ]
RTS line control with delay should be triggered when there is no more
bytes in kfifo and hardware buffer is empty. Without this patch RTS
control is scheduled right after feeding hardware buffer and this is too
early.
RTS line may change state before hardware buffer is empty.
With this patch delayed RTS state change is triggered when function
cdns_uart_handle_tx is called from cdns_uart_isr on
CDNS_UART_IXR_TXEMPTY exactly when hardware completed transmission
Fixes: fccc9d9233 ("tty: serial: uartps: Add rs485 support to uartps driver")
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20251221103221.1971125-1-jakub.turek@elsta.tech
Signed-off-by: Jakub Turek <jakub.turek@elsta.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eee00df8e1 ]
The field 'function' of struct hrtimer should not be changed directly, as
the write is lockless and a concurrent timer expiry might end up using the
wrong function pointer.
Switch to use hrtimer_update_function() which also performs runtime checks
that it is safe to modify the callback.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/af7823518fb060c6c97105a2513cfc61adbdf38f.1738746927.git.namcao@linutronix.de
Stable-dep-of: 267ee93c41 ("serial: xilinx_uartps: fix rs485 delay_rts_after_send")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
