Try to make fs/verity/verify.c aware of large folios. This includes
making fsverity_verify_bio() support the case where the bio contains
large folios, and adding a function fsverity_verify_folio() which is the
equivalent of fsverity_verify_page().
There's no way to actually test this with large folios yet, but I've
tested that this doesn't cause any regressions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230127221529.299560-1-ebiggers@kernel.org
This fixes the build here locally on my 32-bit arm build.
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit f439a959dc)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The Allwinner D1 family of SoCs contain a PPU power domain controller
separate from the PRCM. It can power down the video engine and DSP, and
it contains special logic for hardware-assisted CPU idle.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230126063419.15971-4-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The PPU contains a series of identical MMIO register ranges, one for
each power domain. Each range contains control/status bits for a clock
gate, reset line, output gates, and a power switch. (The clock and reset
are separate from, and in addition to, the bits in the CCU.) It also
contains a hardware power sequence engine to control the other bits.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230126063419.15971-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Allwinner D1 family of SoCs contain a PPU power domain controller
separate from the PRCM. It can power down the video engine and DSP, and
it contains special logic for hardware-assisted CPU idle. Other recent
Allwinner SoCs (e.g. TV303) have a PPU with a different set of domains.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230126063419.15971-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Now that several D1-based boards are supported, enable the platform in
our defconfig. Build in the drivers which are necessary to boot, such as
the pinctrl, MMC, RTC (which provides critical clocks), SPI (for flash),
and watchdog (which may be left enabled by the bootloader). Other common
onboard peripherals are enabled as modules.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230126045738.47903-12-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Allwinner manufactures the sunxi family of application processors. This
includes the "sun8i" series of ARMv7 SoCs, the "sun50i" series of ARMv8
SoCs, and now the "sun20i" series of 64-bit RISC-V SoCs.
The first SoC in the sun20i series is D1, containing a single T-HEAD
C906 core. D1s is a low-pin-count variant of D1 with co-packaged DRAM.
Most peripherals are shared across the entire chip family. In fact, the
ARMv7 T113 SoC is pin-compatible and almost entirely register-compatible
with the D1s.
This means many existing device drivers can be reused. To facilitate
this reuse, name the symbol ARCH_SUNXI, since that is what the existing
drivers have as their dependency.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230126045738.47903-11-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
This fixes the doxygen format documentation above the
user_ring_buffer__* APIs. There has to be a newline
before the @brief, otherwise doxygen won't render them
for libbpf.readthedocs.org.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230126024749.522278-1-grantseltzer@gmail.com
The 100ask Dongshan Nezha STU is a system-on-module that can be used
standalone or with a carrier board. The SoM provides gigabit Ethernet,
HDMI, a USB peripheral port, and WiFi/Bluetooth via an RTL8723DS chip.
The "DIY" carrier board exposes almost every pin from the D1 SoC to 0.1"
headers, but contains no digital circuitry, so it does not have its own
devicetree.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-10-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The MangoPi MQ Pro is a tiny SBC with a layout compatible to the
Raspberry Pi Zero. It includes the Allwinner D1 SoC, 512M or 1G of DDR3,
and an RTL8723DS-based WiFi/Bluetooth module.
The board also exposes GPIO Port E via a connector on the end of the
board, which can support either a camera or an RMII Ethernet PHY. The
additional regulators supply that connector.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-9-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Sipeed manufactures a "Lichee RV" system-on-module, which provides a
minimal working system on its own, as well as a few carrier boards. The
"Dock" board provides audio, USB, and WiFi. The "86 Panel" additionally
provides 100M Ethernet and a built-in display panel.
The 86 Panel repurposes the USB ID and VBUS detection GPIOs for its RGB
panel interface, since the USB OTG port is inaccessible inside the case.
Co-developed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-8-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
"D1 Nezha" is Allwinner's first-party development board for the D1 SoC.
It was shipped with 512M, 1G, or 2G of DDR3. It supports onboard audio,
HDMI, gigabit Ethernet, WiFi and Bluetooth, USB 2.0 host and OTG ports,
plus low-speed I/O from the SoC and a GPIO expander chip.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-7-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The MangoPi MQ is a tiny SBC built around the Allwinner D1s. Its
onboard peripherals include two USB Type-C ports (1 device, 1 host)
and RTL8189FTV WLAN.
A MangoPi MQ-R variant of the board also exists. The MQ-R has a
different form factor, but the onboard peripherals are the same.
Most D1 and D1s boards use a similar power tree, with the 1.8V rail
powered by the SoC's internal LDOA, analog domains powered by ALDO,
and the rest of the board powered by always-on fixed regulators. To
avoid duplication, factor out the regulator information that is
common across boards.
The board also exposes GPIO Port E via a FPC connector, which can
support either a camera or an RMII Ethernet PHY. The additional
regulators supply that connector.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-6-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
D1 (aka D1-H), D1s (aka F133), R528, and T113 are a family of SoCs based
on a single die, or at a pair of dies derived from the same design.
D1 and D1s contain a single T-HEAD Xuantie C906 CPU, whereas R528 and
T113 contain a pair of Cortex-A7's. D1 and R528 are the full version of
the chip with a BGA package, whereas D1s and T113 are low-pin-count QFP
variants.
Because the original design supported both ARM and RISC-V CPUs, some
peripherals are duplicated. In addition, all variants except D1s contain
a HiFi 4 DSP with its own set of peripherals.
The devicetrees are organized to minimize duplication:
- Common perhiperals are described in sunxi-d1s-t113.dtsi
- DSP-related peripherals are described in sunxi-d1-t113.dtsi
- RISC-V specific hardware is described in sun20i-d1s.dtsi
- Functionality unique to the D1 variant is described in sun20i-d1.dtsi
The SOC_PERIPHERAL_IRQ macro handles the different #interrupt-cells
values between the ARM (GIC) and RISC-V (PLIC) versions of the SoC.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-5-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Several SoMs and boards are available that feature the Allwinner D1 or
D1s SoC. Document their compatible strings.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-4-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Some boards using the Allwinner D1 or D1s SoC are made by vendors not
previously documented.
Clockwork Tech LLC (https://www.clockworkpi.com/) manufactures the
ClockworkPi and DevTerm boards.
Beijing Widora Technology Co., Ltd. (https://mangopi.cc/) manufactures
the MangoPi family of boards.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Allwinner sunxi SoCs with a RISC-V CPU use the sun20i designator. Match
that pattern in addition to the designators for 32 and 64-bit ARM SoCs.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Commit 2aeaf663b8 introduced strict checking for variable length
payload size validation. The payload length of received data must
match the size of the requested data by the caller except for the case
where the min_out value is set.
The Get Log command does not have a header with a length field set.
The Log size is determined by the Get Supported Logs command (CXL 3.0,
8.2.9.5.1). However, the actual size can be smaller and the number of
valid bytes in the payload output must be determined reading the
Payload Length field (CXL 3.0, Table 8-36, Note 2).
Two issues arise: The command can successfully complete with a payload
length of zero. And, the valid payload length must then also be
consumed by the caller.
Change cxl_xfer_log() to pass the number of payload bytes back to the
caller to determine the number of log entries. Implement the payload
handling as a special case where mbox_cmd->size_out is consulted when
cxl_internal_send_cmd() returns -EIO. A WARN_ONCE() is added to check
that -EIO is only returned in case of an unexpected output size.
Logs can be bigger than the maximum payload length and multiple Get
Log commands can be issued. If the received payload size is smaller
than the maximum payload size we can assume all valid bytes have been
fetched. Stop sending further Get Log commands then.
On that occasion, change debug messages to also report the opcodes of
supported commands.
The variable payload commands GET_LSA and SET_LSA are not affected by
this strict check: SET_LSA cannot be broken because SET_LSA does not
return an output payload, and GET_LSA never expects short reads.
Fixes: 2aeaf663b8 ("cxl/mbox: Add variable output size validation for internal commands")
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230119094934.86067-1-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-----BEGIN PGP SIGNATURE-----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=LSQy
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A bunch of driver fixes with a tiny bit of new IDs"
* tag 'i2c-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rk3x: fix a bunch of kernel-doc warnings
i2c: axxia: use 'struct' for kernel-doc notation
dt-bindings: i2c: renesas,rzv2m: Fix SoC specific string
i2c: mxs: suppress probe-deferral error message
i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
i2c: designware: Fix unbalanced suspended flag
i2c: designware: use casting of u64 in clock multiplication to avoid overflow
- fix the -c option in the gpio-event-mode user-space example program
- fix the irq number translation in gpio-ep93xx and make its irqchip immutable
- add a missing spin_unlock in error path in gpio-mxc
- fix a suspend breakage on System76 and Lenovo Gen2a introduced in GPIO ACPI
-----BEGIN PGP SIGNATURE-----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=wh3L
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix the -c option in the gpio-event-mode user-space example program
- fix the irq number translation in gpio-ep93xx and make its irqchip
immutable
- add a missing spin_unlock in error path in gpio-mxc
- fix a suspend breakage on System76 and Lenovo Gen2a introduced in
GPIO ACPI
* tag 'gpio-fixes-for-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
tools: gpio: fix -c option of gpio-event-mon
gpio: ep93xx: remove unused variable
gpio: ep93xx: Make irqchip immutable
gpio: ep93xx: Fix port F hwirq numbers in handler
gpio: mxc: Unlock on error path in mxc_flip_edge()
gpiolib-acpi: Don't set GPIOs for wakeup in S3 mode
A fix for the DT binding documentation which dropped a property
when being converted to YAML format causing spurious errors
validating device trees for platforms using the device.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmPT/N4ACgkQJNaLcl1U
h9DebQf+O5ghcGfIu5RnFV5NMaUPlkVKJqY51iJQH50+CNqFAzmCIM8uBQjUxeE9
Ujxenq31RxnBPBzdRZzuKYEWnM7Q2qPUp/dWrcdxJVpBYZuhq+ExQ9teUsf/EeIT
95DorQ9jfOqlV18HNHNCoH8xn5clnW8iDIdciSzfpp3pX+trWAefeIaOlU5H3tKj
Lb1gEf29LrE6zDsDRKjL1tuyQw/ED8MpKzcX6/Pjm6He5hWXpof1kSMm8Z085XQF
pB8nuJoipQIbbj/cQm/eAwb8R5AUbotTKxDwamdVtPYm+3FEg3fi/SIBOdbDvRKc
yQS42il5cE+YPozy9myeVps6d8/60A==
=7HDJ
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A fix for the DT binding documentation which dropped a property when
being converted to YAML format causing spurious errors validating
device trees for platforms using the device"
* tag 'regulator-fix-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: samsung,s2mps14: add lost samsung,ext-control-gpios
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCY9PrPQAKCRDh3BK/laaZ
PKk5AP9UUlwGP2XIuCY7hMWvsZKe1FpAXyXzG3jrEmRyBmOEFQD/RMRItvlj330O
ntPw7luRC4Us4TO/xc3OqVE0UUnwqQw=
=sqlV
-----END PGP SIGNATURE-----
Merge tag 'ovl-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two bugs, a recent one introduced in the last cycle, and an older
one from v5.11"
* tag 'ovl-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fail on invalid uid/gid mapping at copy up
ovl: fix tmpfile leak
The Bananapi-M3 has a SATA connector, driven by a USB-to-SATA bridge
soldered on the board. The power for the SATA device is provided by a
GPIO controlled regulator. Since the SATA device is behind USB, it has
no DT node, so we never described this regulator. Instead U-Boot was
turning this on in a rather hackish way, which we now want to get rid of.
On top of that it seems fragile to leave this GPIO undescribed, as
userland could claim it and turn the disk off.
Add a fixed regulator, controlled by the PD25 GPIO, and mark it as
always-on. This would mimic the current situation, but in a safer way,
and would allow U-Boot to drop the CONFIG_SATAPWR enable hack.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230120012616.30960-1-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The property named in the schema is 'enable-gpios', not 'enable-gpio'.
This makes no difference at runtime, because the regulator is marked as
always-on, but it breaks validation.
Fixes: 4701fc6e5d ("ARM: dts: sun8i: add FriendlyARM NanoPi Duo2")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231225854.16320-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
These board devicetrees fail to validate because the gpio-leds schema
requires its child nodes to have "led" in the node name.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20221231225854.16320-1-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
drm:
- DP MST kref fix
- fb_helper: check return value
i915:
- Fix BSC default context for Meteor Lake
- Fix selftest-scheduler's modify_type
- memory leak fix
amdgpu:
- GC11.x fixes
- SMU13.0.0 fix
- Freesync video fix
- DP MST fixes
- build fix
-----BEGIN PGP SIGNATURE-----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=w7XH
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-01-27' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Fairly small this week as well, i915 has a memory leak fix and some
minor changes, and amdgpu has some MST fixes, and some other minor
ones:
drm:
- DP MST kref fix
- fb_helper: check return value
i915:
- Fix BSC default context for Meteor Lake
- Fix selftest-scheduler's modify_type
- memory leak fix
amdgpu:
- GC11.x fixes
- SMU13.0.0 fix
- Freesync video fix
- DP MST fixes
- build fix"
* tag 'drm-fixes-2023-01-27' of git://anongit.freedesktop.org/drm/drm:
amdgpu: fix build on non-DCN platforms.
drm/amd/display: Fix timing not changning when freesync video is enabled
drm/display/dp_mst: Correct the kref of port.
drm/amdgpu/display/mst: update mst_mgr relevant variable when long HPD
drm/amdgpu/display/mst: limit payload to be updated one by one
drm/amdgpu/display/mst: Fix mst_state->pbn_div and slot count assignments
drm/amdgpu: declare firmware for new MES 11.0.4
drm/amdgpu: enable imu firmware for GC 11.0.4
drm/amd/pm: add missing AllowIHInterrupt message mapping for SMU13.0.0
drm/amdgpu: remove unconditional trap enable on add gfx11 queues
drm/fb-helper: Use a per-driver FB deferred I/O handler
drm/fb-helper: Check fb_deferred_io_init() return value
drm/i915/selftest: fix intel_selftest_modify_policy argument types
drm/i915/mtl: Fix bcs default context
drm/i915: Fix a memory leak with reused mmap_offset
drm/drm_vma_manager: Add drm_vma_node_allow_once()
- Add support for USB host/device configuration on RZ/N1,
- Add PLL2 programming support, and CAN-FD clocks on R-Car V4H,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCY9OhkwAKCRCKwlD9ZEnx
cHPuAQCo1Id5WB+ho1fs0L1OCrMR+3k9xoFuSWdq1OzKnQ1vmAEAq50oJT9U8+Ge
LFz+RyJVvlVkpKNhYT40OzIXIn0KmwE=
=7Cjr
-----END PGP SIGNATURE-----
Merge tag 'renesas-clk-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas
Pull more Renesas clk driver updates from Geert Uytterhoeven:
- Add support for USB host/device configuration on RZ/N1
- Add PLL2 programming support, and CAN-FD clocks on R-Car V4H
- Miscellaneous fixes and improvements
* tag 'renesas-clk-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: r8a779g0: Add CAN-FD clocks
clk: renesas: r8a779g0: Tidy up DMAC name on SYS-DMAC
clk: renesas: r8a779a0: Tidy up DMAC name on SYS-DMAC
clk: renesas: r8a779g0: Add custom clock for PLL2
clk: renesas: cpg-mssr: Remove superfluous check in resume code
clk: renesas: r9a06g032: Handle h2mode setting based on USBF presence
Add locking to the Intel int340x thermal control driver to prevent
its thermal zone callbacks from racing with firmware-induced thermal
trip point updates (Srinivas Pandruvada, Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=wNe5
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Add locking to the Intel int340x thermal control driver to prevent its
thermal zone callbacks from racing with firmware-induced thermal trip
point updates (Srinivas Pandruvada, Rafael Wysocki)"
* tag 'thermal-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: Add locking to int340x_thermal_get_trip_type()
thermal: intel: int340x: Protect trip temperature from concurrent updates
The GuC specific register state entry in the error capture object was
just called 'capture'. Although the companion 'node' entry was called
'guc_capture_node'. Rename the base entry to be 'guc_capture' instead
so that it is a) more consistent and b) more obvious what it is.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-9-John.C.Harrison@Intel.com
For understanding bug reports, it can be useful to have an explicit
dmesg print when a reset notification is received from GuC. As opposed
to simply inferring that this happened from other messages.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-8-John.C.Harrison@Intel.com
Engine resets are supposed to never fail. But in the case when one
does (due to unknown reasons that normally come down to a missing
w/a), it is useful to get as much information out of the system as
possible. Given that the GuC intentionally dies on such a situation,
it is not possible to get a guilty context notification back. So do a
manual search instead. Given that GuC is dead, this is safe because
GuC won't be changing the engine state asynchronously.
v2: Change comment to be less alarming (Tvrtko)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-7-John.C.Harrison@Intel.com
A hang situation has been observed where the only requests on the
context were either completed or not yet started according to the
breaadcrumbs. However, the register state claimed a batch was (maybe)
in progress. So, allow capture of the pending request on the grounds
that this might be better than nothing.
v2: Reword 'not started' warning message (Tvrtko)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-6-John.C.Harrison@Intel.com
There was a report of error captures occurring without any hung
context being indicated despite the capture being initiated by a 'hung
context notification' from GuC. The problem was not reproducible.
However, it is possible to happen if the context in question has no
active requests. For example, if the hang was in the context switch
itself then the breadcrumb write would have occurred and the KMD would
see an idle context.
In the interests of attempting to provide as much information as
possible about a hang, it seems wise to include the engine info
regardless of whether a request was found or not. As opposed to just
prentending there was no hang at all.
So update the error capture code to always record engine information
if a context is given. Which means updating record_context() to take a
context instead of a request (which it only ever used to find the
context anyway). And split the request agnostic parts of
intel_engine_coredump_add_request() out into a seaprate function.
v2: Remove a duplicate 'if' statement (Umesh) and fix a put of a null
pointer.
v3: Tidy up request locking code flow (Tvrtko)
v4: Pull in improved info message from next patch and fix up potential
leak of GuC register state (Daniele)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> (v2)
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-5-John.C.Harrison@Intel.com
The debugfs dump of requests was confused about what state requires
the execlist lock versus the GuC lock. There was also a bunch of
duplicated messy code between it and the error capture code.
So refactor the hung request search into a re-usable function. And
reduce the span of the execlist state lock to only the execlist
specific code paths. In order to do that, also move the report of hold
count (which is an execlist only concept) from the top level dump
function to the lower level execlist specific function. Also, move the
execlist specific code into the execlist source file.
v2: Rename some functions and move to more appropriate files (Daniele).
v3: Rename new execlist dump function (Daniele)
Fixes: dc0dad365c ("drm/i915/guc: Fix for error capture after full GPU reset with GuC")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-4-John.C.Harrison@Intel.com
When GuC support was added to error capture, the reference counting
around the request object was broken. Fix it up.
The context based search manages the spinlocking around the search
internally. So it needs to grab the reference count internally as
well. The execlist only request based search relies on external
locking, so it needs an external reference count but within the
spinlock not outside it.
The only other caller of the context based search is the code for
dumping engine state to debugfs. That code wasn't previously getting
an explicit reference at all as it does everything while holding the
execlist specific spinlock. So, that needs updaing as well as that
spinlock doesn't help when using GuC submission. Rather than trying to
conditionally get/put depending on submission model, just change it to
always do the get/put.
v2: Explicitly document adding an extra blank line in some dense code
(Andy Shevchenko). Fix multiple potential null pointer derefs in case
of no request found (some spotted by Tvrtko, but there was more!).
Also fix a leaked request in case of !started and another in
__guc_reset_context now that intel_context_find_active_request is
actually reference counting the returned request.
v3: Add a _get suffix to intel_context_find_active_request now that it
grabs a reference (Daniele).
v4: Split the intel_guc_find_hung_context change to a separate patch
and rename intel_context_find_active_request_get to
intel_context_get_active_request (Tvrtko).
v5: s/locking/reference counting/ in commit message (Tvrtko)
Fixes: dc0dad365c ("drm/i915/guc: Fix for error capture after full GPU reset with GuC")
Fixes: 573ba126ae ("drm/i915/guc: Capture error state on context reset")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-3-John.C.Harrison@Intel.com
intel_guc_find_hung_context() was not acquiring the correct spinlock
before searching the request list. So fix that up. While at it, add
some extra whitespace padding for readability.
Fixes: dc0dad365c ("drm/i915/guc: Fix for error capture after full GPU reset with GuC")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-2-John.C.Harrison@Intel.com
- Fix event counting regression in Arm CMN PMU driver due to broken optimisation
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmPUBmoQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjND5ICACD5MypW0I+BtQiRRG2/yq+hAYgJN2TVnJC
+o//Atj7aiwI5EIv+SxFhhwlRNsWG8DnwotetdO7YTqQWskDBNSSX6LO9bxjt7N8
eGERr97IK2hOYlLgA5gStKSp4FJL6WLysNXwoyy+Ff6pBtLTFOZHdgUEsEV55XIL
yCK8DdUU+J4CbcQX1EKwdj4yyJ2Hu2ThMvNnIpC6OrNg4eHIIP4fZbE+EKGNdcA6
Xh+2tSfqUeClqOqbXKnshH9DLgywBgIwW6JUnKHJynNNUrJni6oKqoeBAEJUJkol
prmvEr1if/++0QufOHRHZIx1VyeCFN/vwXrY6nZ8AhMRmjwrTVia
=Dfxt
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
- Fix event counting regression in Arm CMN PMU driver due to broken
optimisation
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Partially revert "perf/arm-cmn: Optimise DTC counter accesses"
* A few DT bindings fixes to more closely align the ISA string
requirements between the bindings and the ISA manual.
* A handful of build error/warning fixes.
* A fix to move init_cpu_topology() later in the boot flow, so it can
allocate memory.
* The IRC channel is now in the MAINTAINERS file, so it's easier to
find.
-----BEGIN PGP SIGNATURE-----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=ZHbl
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A few DT bindings fixes to more closely align the ISA string
requirements between the bindings and the ISA manual.
- A handful of build error/warning fixes.
- A fix to move init_cpu_topology() later in the boot flow, so it can
allocate memory.
- The IRC channel is now in the MAINTAINERS file, so it's easier to
find.
* tag 'riscv-for-linus-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Move call to init_cpu_topology() to later initialization stage
riscv/kprobe: Fix instruction simulation of JALR
riscv: fix -Wundef warning for CONFIG_RISCV_BOOT_SPINWAIT
MAINTAINERS: add an IRC entry for RISC-V
RISC-V: fix compile error from deduplicated __ALTERNATIVE_CFG_2
dt-bindings: riscv: fix single letter canonical order
dt-bindings: riscv: fix underscore requirement for multi-letter extensions
This Kselftest fixes update for Linux 6.2-rc6 consists of a single
fix to a amd-pstate test Makefile bug that deletes source files
during make clean run.
-----BEGIN PGP SIGNATURE-----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=Wb/P
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"A single fix to a amd-pstate test Makefile bug that deletes source
files during make clean run"
* tag 'linux-kselftest-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: amd-pstate: Don't delete source files via Makefile
During suspend flow, i915 currently achors' on the pm_suspend_prepare
callback as the location where we quiesce the entire GPU and perform
all necessary cleanup in order to go into suspend. PXP is also called
during this time to perform the arbitration session teardown (with
the assurance no additional GEM IOCTLs will come after that could
restart the session).
However, if other devices or drivers fail their suspend_prepare, the
system will not go into suspend and i915 will be expected to resume
operation. In this case, we need to re-initialize the PXP hardware
and this really should be done within the pm_resume_complete callback
which is the correct opposing function in the resume sequence to
match pm_suspend_prepare of the suspend sequence.
Because this callback is the last thing at the end of resuming
we expect little to no impact to the rest of the i915 resume sequence
with this change.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125082637.118970-7-alan.previn.teres.alexis@intel.com
A driver bug was recently discovered where the security firmware was
receiving internal HW signals indicating that session key expirations
had occurred. Architecturally, the firmware was expecting a response
from the GuC to acknowledge the event with the firmware side.
However the OS was in a suspended state and GuC had been reset.
Internal specifications actually required the driver to ensure
that all active sessions be properly cleaned up in such cases where
the system is suspended and the GuC potentially unable to respond.
This patch adds the global teardown code in i915's suspend_prepare
code path.
v2 : Split __pxp_global_teardown_locked helper into two variants
for teardown-with-restart vs teardown-for-suspend/shutdown.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Juston Li <justonli@chromium.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125082637.118970-6-alan.previn.teres.alexis@intel.com
A gap was recently discovered where if an application did not
invalidate all of the stream keys (intentionally or not), and the
driver did a full PXP global teardown on the GT subsystem, we
find that future session creation would fail on the security
firmware's side of the equation. i915 is the entity that needs
ensure the sessions' state across both iGT and security firmware
are at a known clean point when performing a full global teardown.
Architecturally speaking, i915 should inspect all active sessions
and submit the invalidate-stream-key PXP command to the security
firmware for each of them. However, for the upstream i915 driver
we only support the arbitration session that can be created
so that will be the only session we will cleanup.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Juston Li <justonli@chromium.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125082637.118970-5-alan.previn.teres.alexis@intel.com
Client on bus have only one vtag map slot and should disregard the vtag
value when cleaning pending read flag.
Fixes read flow control message unexpectedly generated when
clent on bus send messages with different vtags.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125082637.118970-4-alan.previn.teres.alexis@intel.com
Add device link with i915 as consumer and mei_pxp as supplier
to ensure proper ordering of power flows.
V2: condition on absence of heci_pxp to filter out DG
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125082637.118970-3-alan.previn.teres.alexis@intel.com
