Commit graph

797,141 commits

Author SHA1 Message Date
Dan Carpenter
d1d2c290b3 thermal: armada: fix a test in probe()
The platform_get_resource() function doesn't return error pointers, it
returns NULL on error.

Fixes: 3d4e51844a ("thermal: armada: convert driver to syscon register accesses")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22 17:38:24 -07:00
Nick Kossifidis
aef53f97b5
RISC-V: Cosmetic menuconfig changes
* Move the built-in cmdline configuration on a new menu entry "Boot
  options", it doesn't make much sense to be part of the debuging menu.

* Rename "Kernel Type" menu to "Kernel features" to be more consistent with
  what other architectures are using, plus "type" is a bit misleading here.

Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:38:20 -07:00
Masahiro Yamada
ee5928843a
riscv: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
This becomes much neater in Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:38:15 -07:00
Christoph Hellwig
f31b8de988
RISC-V: remove the unused return_to_handler export
This export is not only not needed, but also breaks symbol versioning
due to being an undeclared assembly export.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:38:12 -07:00
Jim Wilson
b90edb3301
RISC-V: Add futex support.
Here is an attempt to add the missing futex support.  I started with the MIPS
version of futex.h and modified it until I got it working.  I tested it on
a HiFive Unleashed running Fedora Core 29 using the fc29 4.15 version of the
kernel.  This was tested against the glibc testsuite, where it fixes 14 nptl
related testsuite failures.  That unfortunately only tests the cmpxchg support,
so I also used the testcase at the end of

    https://lwn.net/Articles/148830/

which tests the atomic_op functionality, except that it doesn't verify that
the operations are atomic, which they obviously are.  This testcase runs
successfully with the patch and fails without it.

I'm not a kernel expert, so there could be details I got wrong here.  I wasn't
sure about the memory model support, so I used aqrl which seemed safest, and
didn't add fences which seemed unnecessary.  I'm not sure about the copyright
statements, I left in Ralf Baechle's line because I started with his code.
Checkpatch reports some style problems, but it is the same style as the MIPS
futex.h, and the uses of ENOSYS appear correct even though it complains about
them.  I don't know if any of that matters.

This patch was tested on qemu with the glibc nptl/tst-cond-except
testcase, and the wake_op testcase from above.

Signed-off-by: Jim Wilson <jimw@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:38:08 -07:00
Jim Wilson
b8c8a9590e
RISC-V: Add FP register ptrace support for gdb.
Add a variable and a macro to describe FP registers, assuming only D is
supported.  FP code is conditional on CONFIG_FPU.  The FP regs and FCSR
are copied separately to avoid copying struct padding.  Tested by hand and
with the gdb testsuite.

Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:38:04 -07:00
Palmer Dabbelt
86e581e310
RISC-V: Mask out the F extension on systems without D
The RISC-V Linux port doesn't support systems that have the F extension
but don't have the D extension -- we actually don't support systems
without D either, but Alan's patch set is rectifying that soon.  For now
I think we can leave this in a semi-broken state and just wait for
Alan's patch set to get merged for proper non-FPU support -- the patch
set is starting to look good, so doing something in-between doesn't seem
like it's worth the work.

I don't think it's worth fretting about support for systems with F but
not D for now: our glibc ABIs are IMAC and IMAFDC so they probably won't
end up being popular.  We can always extend this in the future.

CC: Alan Kao <alankao@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:38:00 -07:00
Palmer Dabbelt
1760debb51
RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
These are just hard coded in the RISC-V port, which doesn't make any
sense.  We should probably be setting these from device tree entries
when they exist, but for now I think it's saner to just leave them all
as their default values.

Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:37:41 -07:00
Anson Huang
b6ad3981ff thermal: imx: handle error path in one place to save duplicated code
During probe phase, the error path can be handled in one place and
use goto method to save many duplicated code.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22 17:37:05 -07:00
Anson Huang
337a4aecda thermal: imx: improve error message
Remove the duplicated "from" to improve the error message.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22 17:36:41 -07:00
Amit Kucheria
36d83c6662 dt-bindings: thermal: Fix a typo in documentation
c(1) + x(1) was actually meant to be c(1) * x(1).

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22 17:36:09 -07:00
Amit Kucheria
c8c3b091b6 thermal: tsens: Check if the IP is correctly enabled by firmware
The SROT registers are initialised by the secure firmware at boot. We
don't have write access to the registers. Check if the block is enabled
before continuing.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22 17:35:30 -07:00
Amit Kucheria
c130a7602e thermal: tsens: Pass register offsets as private data
Registers have moved around across TSENS generations. For example, the
CTRL register was at offset 0x0 in the SROT region on msm8916 but is at
offset 0x4 in newer v2 based TSENS HW blocks.

Allow passing offsets of important registers so that we can continue to
use common functions.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22 17:34:33 -07:00
Amit Kucheria
a15525b5d9 thermal: tsens: Add the SROT address map
On platforms whose device trees specify two address spaces for TSENS, the
second one points to the SROT registers. Initialise the SROT map on those
platforms.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22 17:33:48 -07:00
Amit Kucheria
67b0f5e064 thermal: tsens: Rename map field in order to add a second address map
The TSENS driver currently only uses a limited set of registers from the TM
address space. So it was ok to map just that set of registers and call it
"map".

We'd now like to map a second set: SROT registers to introduce new
functionality. Rename the "map" field to a more appropriate "tm_map".

The 8960 doesn't have a clear split between TM and SROT registers. To avoid
complicating the data structure, it will switchover to using tm_map for its
maps.

There is no functional change with this patch.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22 17:33:23 -07:00
Amit Kucheria
caac52bce6 thermal: tsens: Get rid of dead code
hw_id is dynamically allocated but not used anywhere. Get rid of dead
code.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22 17:32:38 -07:00
Amit Kucheria
2d71d8ded5 thermal: tsens: Add SPDX license identifiers
The TSENS drivers use a GPL-2.0 license. Replace with equivalent SPDX
tags and delete the full license text.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22 17:32:03 -07:00
Amit Kucheria
bd7557f55a thermal: tsens: Prepare 8916 and 8974 tsens to use SROT and TM address space
We've already converted over the devicetree of platforms using v2
version of the TSENS IP to use two address spaces. Now prepare to
convert over the 8916 and 8974 platforms to use separate SROT and TM
address spaces.

This patch will work with device trees with one or two address spaces
because we set the tm_offset in commit 5b1283984f ("thermal: tsens:
Add support to split up register address space into two").

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22 17:31:15 -07:00
Anson Huang
6017e2a9d7 thermal: qoriq: add i.mx8mq support
Add i.mx8mq specific compatible string.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22 17:29:47 -07:00
Rob Herring
9b96566063 thermal: Convert to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22 17:28:36 -07:00
Linus Torvalds
b537149a2f spi: SPI updates for v5.0
One new core feature here, a small collection of new drivers and a bunch
 of small improvements in existing drivers.
 
  - A new CS_WORD flag for transfers where the chip select is toggled at
    every word, with both a generic implementation and the ability for
    controllers to do this automatically (including a DaVinci one).
  - New drivers for Mediatek MT2712, Qualcomm GENI and QSPI, Spreadtrum
    SPI and ST STM32 QSPI plus new IDs for several existing ones.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlvNwCATHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0L8HB/9Xk9DCeTmdioVeVXI9lQj1lqKuLOcH
 ip4sVOpfVgFhFzuvzXAHiGbhzrsYNlfTW7wqgJasWQthzXMlXrF2szODUqPniowK
 OnUouATG6jizHupIB3ewsK5Hf292f7D9OoKWGoWVu2QmJyVzSPASp3foFwQqJIca
 iW9hB8d/WBueq7mGcoCJpA4HI97+8XxUp2LO+gpcMwtwncFP9p8FFLrkdOwqEGFK
 y/NmD4CzzIA/YQXZF7WeGfwTwoLHJf2BwHY/ZNfXy/A0/nXQdqPQqqN5iiR8zsaX
 Xve28mwmSDBExX1KdexRbO+4jZbgMTk4NM8hEz0h3H22xIVegkBfoadg
 =UdBu
 -----END PGP SIGNATURE-----

Merge tag 'spi-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "One new core feature here, a small collection of new drivers and a
  bunch of small improvements in existing drivers:

   - A new CS_WORD flag for transfers where the chip select is toggled
     at every word, with both a generic implementation and the ability
     for controllers to do this automatically (including a DaVinci one).

   - New drivers for Mediatek MT2712, Qualcomm GENI and QSPI, Spreadtrum
     SPI and ST STM32 QSPI plus new IDs for several existing ones"

* tag 'spi-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (86 commits)
  spi: lpspi: add imx8qxp compatible string
  spi: Allow building SPI_BCM63XX_HSSPI on ARM-based SoCs
  spi: omap2-mcspi: Add slave mode support
  spi: omap2-mcspi: Set FIFO DMA trigger level to word length
  spi: omap2-mcspi: Switch to readl_poll_timeout()
  spi: spi-mem: add stm32 qspi controller
  dt-bindings: spi: add stm32 qspi controller
  spi: sh-msiof: document R8A779{7|8}0 bindings
  spi: pic32-sqi: don't pass GFP_DMA32 to dma_alloc_coherent
  MAINTAINERS: Add entry for Broadcom SPI controller
  spi: sh-msiof: fix deferred probing
  spi: imx: use PIO mode if size is small
  spi: imx: correct wml as the last sg length
  spi: imx: move wml setting to later than setup_transfer
  PCI: Provide pci_match_id() with CONFIG_PCI=n
  spi: Make GPIO CSs honour the SPI_NO_CS flag
  spi/spi-pxa2xx: add PXA2xx SSP SPI Controller
  spi: pxa2xx: Add devicetree support
  spi: pxa2xx: Use an enum for type
  spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  ...
2018-10-23 01:26:05 +01:00
Linus Torvalds
6214a9fe2a regmap: Updates for v5.0
A small update with a couple of new APIs that are useful for some small
 sets of devices:
 
  - Split up the single_rw flagging to map read and write separately as
    some devices support bulk operations for only read or only write.
  - Add a write version of the noinc API.
  - Clean up the code for LOG_DEVICE a bit.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlvNvQgTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0MAPB/9Ftz3U5DpfLoN/KEOQlGv6LeoryRcI
 kSRXm7zlZmIrMm4xQtR59oXDSh05uPaZnbXPcIajfQhq895Y6T1+idHbd9pBmDFq
 cZ+YeORg+5NSThnbJeNBa1hiMFvM8seCP2eeHEu6ZX+jWE7AmfFsW6re3e9uXg+m
 DQ9tCFMnByShHFfEhWkvQiZAfPHLgN7MK6FvxAjYoUq/GeGjhCyOz1S0vNZXc4pj
 P6hJHngr+6axZYQ+IXcwoGj1UdS3aZWvamL5eCV/plFYaf9uNYgnyaGxhY7/hddB
 Ty3GHJOhGWZq8fjIR/ejS6M2g0c36tWq38uGHGAenyJsta1Kub/fcdzQ
 =WHhl
 -----END PGP SIGNATURE-----

Merge tag 'regmap-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "A small update with a couple of new APIs that are useful for some
  small sets of devices:

   - Split up the single_rw flagging to map read and write separately as
     some devices support bulk operations for only read or only write.

   - Add a write version of the noinc API.

   - Clean up the code for LOG_DEVICE a bit"

* tag 'regmap-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: use less #ifdef for LOG_DEVICE
  regmap: Add regmap_noinc_write API
  regmap: split up regmap_config.use_single_rw
  regmap: fix comment for regmap.use_single_write
2018-10-23 01:17:27 +01:00
Christophe Leroy
b6ae3550c8 powerpc/8xx: add missing header in 8xx_mmu.c
arch/powerpc/mm/8xx_mmu.c:174:6: error: no previous prototype for ‘set_context’ [-Werror=missing-prototypes]
 void set_context(unsigned long id, pgd_t *pgd)

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
2018-10-22 19:11:58 -05:00
Christophe Leroy
e738c5f155 powerpc/8xx: Add DT node for using the SEC engine of the MPC885
The MPC885 has SEC engine version 1.2 with the following details:
- Number of Crypto channels: 1
- Exec Units: DEU, MDEU and AESU
- Available descriptors: 00010, 00100, 00110, 01000, 11000, 11010

It is also supposed to have descriptor 00000, but it doesn't work
properly so we keep it out for the moment.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
2018-10-22 19:11:55 -05:00
Linus Torvalds
a36cf68651 SPI NOR changes:
Core changes:
   * Support non-uniform erase size
   * Support controllers with limited TX fifo size
 
  Driver changes:
   * m25p80: Re-issue a WREN command after each write access
   * cadence: Pass a proper dir value to dma_[un]map_single()
   * fsl-qspi: Check fsl_qspi_get_seqid() return val make sure 4B
     addressing opcodes are properly handled
   * intel-spi: Add a new PCI entry for Ice Lake
 
 NAND changes:
  Raw NAND core changes:
  - Two batchs of cleanups of the NAND API, including:
    * Deprecating a lot of interfaces (now replaced by ->exec_op()).
    * Moving code in separate drivers (JEDEC, ONFI), in private files
      (internals), in platform drivers, etc.
    * Functions/structures reordering.
    * Exclusive use of the nand_chip structure instead of the MTD one
      all across the subsystem.
  - Addition of the nand_wait_readrdy/rdy_op() helpers.
 
  Raw NAND controllers drivers changes:
  - Various coccinelle patches.
  - Marvell:
    * Use regmap_update_bits() for syscon access.
    * More documentation.
    * BCH failure path rework.
    * More layouts to be supported.
    * IRQ handler complete() condition fixed.
  - Fsl_ifc:
    * SRAM initialization fixed for newer controller versions.
  - Denali:
    * Fix licenses mismatch and use a SPDX tag.
    * Set SPARE_AREA_SKIP_BYTES register to 8 if unset.
  - Qualcomm:
    * Do not include dma-direct.h.
  - Docg4:
    * Removed.
  - Ams-delta:
    * Use of a GPIO lookup table
    * Internal machinery changes.
 
  Raw NAND chip drivers changes:
  - Toshiba:
    * Add support for Toshiba memory BENAND
    * Pass a single nand_chip object to the status helper.
  - ESMT:
    * New driver to retrieve the ECC requirements from the 5th ID byte.
 
 MTD changes:
  * physmap cleanups/fixe
  * gpio-addr-flash cleanups/fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEKmCqpbOU668PNA69Ze02AX4ItwAFAlvNmJocHGJvcmlzLmJy
 ZXppbGxvbkBib290bGluLmNvbQAKCRBl7TYBfgi3AKr+D/4pH0gYSGDUstZsqUHW
 gZsPRU4jmOA+OCRbSxE03bOZOYR0UPgdoUYLfAKhZ5qxc7wHd3b47wykP0kUEviu
 lC8QhSs4DUA+EuMVPDVS4FlXRT0e3dMV7jh/IK6nInshD2YkaovyCqa6GvgwFEcM
 7BCizxRhtHV8+fo7GVQWuMLb9ZfbEvz42D0sYOu6hIsF1SnRDvHOvfdDUFEXpJoF
 a2mC9ove65ChEzc2iZ/r260iZ4aoJYb9XJRJKWxmYeITZSmLNmcrUyGqAaNQ7NRc
 AIuPXASbeHGjrIuEfXpKYW07AE5MV1nJFSk3v4u5FjgoohOoobPp7npk+Lz/qwe3
 y8/uW9qOQ/iEOsRnkvMGNu4Yjhw41L1a+J5wVvUvzmwHy1xMCrRHYB/8gXoZzemR
 A7XmCPwjAFVWv1WeKV2cs5MLW9yZq9QNMtGLlNs5OgFR6CccLk67/tHIkYLsJ/l9
 IDXFhd/YKhTeF361u6Iimmgb427TwM71P9N+OMpv4nk46DxurpxkgGle3nslzKNU
 DOFNFlMGiPIx3h4X96AKER6u7cxiOXnLGq+XeHa/y8tIrziy3jg03YoTh0RSwKxV
 J3EXwh1sFLaeebwWEgpE3Ag1LOxpRCqJ2ED71SPzS/DR/938HBVsEoPqUEHNf1in
 jwsUB3cRzNwf+XX68DRCVT5GFA==
 =7w4w
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-4.20' of git://git.infradead.org/linux-mtd

Pull mtd updates from Boris Brezillon:
 "SPI NOR core changes:
   - Support non-uniform erase size
   - Support controllers with limited TX fifo size

 Driver changes:
   - m25p80: Re-issue a WREN command after each write access
   - cadence: Pass a proper dir value to dma_[un]map_single()
   - fsl-qspi: Check fsl_qspi_get_seqid() return val make sure 4B
     addressing opcodes are properly handled
   - intel-spi: Add a new PCI entry for Ice Lake

 Raw NAND core changes:
   - Two batchs of cleanups of the NAND API, including:
      * Deprecating a lot of interfaces (now replaced by ->exec_op()).
      * Moving code in separate drivers (JEDEC, ONFI), in private files
        (internals), in platform drivers, etc.
      * Functions/structures reordering.
      * Exclusive use of the nand_chip structure instead of the MTD one
        all across the subsystem.
   - Addition of the nand_wait_readrdy/rdy_op() helpers.

 Raw NAND controllers drivers changes:
   - Various coccinelle patches.
   - Marvell:
      * Use regmap_update_bits() for syscon access.
      * More documentation.
      * BCH failure path rework.
      * More layouts to be supported.
      * IRQ handler complete() condition fixed.
   - Fsl_ifc:
      * SRAM initialization fixed for newer controller versions.
   - Denali:
      * Fix licenses mismatch and use a SPDX tag.
      * Set SPARE_AREA_SKIP_BYTES register to 8 if unset.
   - Qualcomm:
      * Do not include dma-direct.h.
   - Docg4:
      * Removed.
   - Ams-delta:
      * Use of a GPIO lookup table
      * Internal machinery changes.

 Raw NAND chip drivers changes:
   - Toshiba:
      * Add support for Toshiba memory BENAND
      * Pass a single nand_chip object to the status helper.
   - ESMT:
      * New driver to retrieve the ECC requirements from the 5th ID
        byte.

  MTD changes:
   - physmap cleanups/fixe
   - gpio-addr-flash cleanups/fixes"

* tag 'mtd/for-4.20' of git://git.infradead.org/linux-mtd: (93 commits)
  jffs2: free jffs2_sb_info through jffs2_kill_sb()
  mtd: spi-nor: fsl-quadspi: fix read error for flash size larger than 16MB
  mtd: spi-nor: intel-spi: Add support for Intel Ice Lake SPI serial flash
  mtd: maps: gpio-addr-flash: Convert to gpiod
  mtd: maps: gpio-addr-flash: Replace array with an integer
  mtd: maps: gpio-addr-flash: Use order instead of size
  mtd: spi-nor: fsl-quadspi: Don't let -EINVAL on the bus
  mtd: devices: m25p80: Make sure WRITE_EN is issued before each write
  mtd: spi-nor: Support controllers with limited TX FIFO size
  mtd: spi-nor: cadence-quadspi: Use proper enum for dma_[un]map_single
  mtd: spi-nor: parse SFDP Sector Map Parameter Table
  mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  mtd: rawnand: marvell: fix the IRQ handler complete() condition
  mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unset
  mtd: rawnand: r852: fix spelling mistake "card_registred" -> "card_registered"
  mtd: rawnand: toshiba: Pass a single nand_chip object to the status helper
  mtd: maps: gpio-addr-flash: Use devm_* functions
  mtd: maps: gpio-addr-flash: Fix ioremapped size
  mtd: maps: gpio-addr-flash: Replace custom printk
  mtd: physmap_of: Release resources on error
  ...
2018-10-23 01:09:22 +01:00
Anup Patel
8b20d2db0a
RISC-V: Show IPI stats
This patch provides arch_show_interrupts() implementation to
show IPI stats via /proc/interrupts.

Now the contents of /proc/interrupts" will look like below:
           CPU0       CPU1       CPU2       CPU3
  8:         17          7          6         14  SiFive PLIC   8  virtio0
 10:         10         10          9         11  SiFive PLIC  10  ttyS0
IPI0:       170        673        251         79  Rescheduling interrupts
IPI1:         1         12         27          1  Function call interrupts

Signed-off-by: Anup Patel <anup@brainfault.org>
[Atish - Fixed checkpatch errors]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>

Changes since v2:
 - Remove use of IPI_CALL_WAKEUP because it's being removed

Changes since v1:
 - Add stub inline show_ipi_stats() function for !CONFIG_SMP
 - Make ipi_names[] dynamically sized at compile time
 - Minor beautification of ipi_names[] using tabs

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:37 -07:00
Anup Patel
4b26d22fdf
RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo
Currently, /proc/cpuinfo show logical CPU ID as Hart ID which
is in-correct. This patch shows CPU ID and Hart ID separately
in /proc/cpuinfo using cpuid_to_hardid_map().

With this patch, contents of /proc/cpuinfo looks as follows:
processor	: 0
hart		: 1
isa		: rv64imafdc
mmu		: sv48

processor	: 1
hart		: 0
isa		: rv64imafdc
mmu		: sv48

processor	: 2
hart		: 2
isa		: rv64imafdc
mmu		: sv48

processor	: 3
hart		: 3
isa		: rv64imafdc
mmu		: sv48

Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:37 -07:00
Atish Patra
f99fb607fb
RISC-V: Use Linux logical CPU number instead of hartid
Setup the cpu_logical_map during boot. Moreover, every SBI call
and PLIC context are based on the physical hartid. Use the logical
CPU to hartid mapping to pass correct hartid to respective functions.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:37 -07:00
Atish Patra
6825c7a80f
RISC-V: Add logical CPU indexing for RISC-V
Currently, both Linux CPU id and hart id are same.
This is not recommended as it will lead to discontinuous CPU
indexing in Linux. Moreover, kdump kernel will run from CPU0
which would be absent if we follow existing scheme.

Implement a logical mapping between Linux CPU id and hart
id to decouple these two. Always mark the boot processor as
CPU0 and all other CPUs get the logical CPU id based on their
booting order.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:37 -07:00
Atish Patra
a37d56fc40
RISC-V: Use WRITE_ONCE instead of direct access
The secondary harts spin on couple of per cpu variables until both of
these are non-zero so it's not necessary to have any ordering here.
However, WRITE_ONCE should be used to avoid tearing.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:37 -07:00
Palmer Dabbelt
46373cb442
RISC-V: Use mmgrab()
commit f1f1007644 ("mm: add new mmgrab() helper") added a
helper that we missed out on.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:36 -07:00
Palmer Dabbelt
177fae4515
RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu
The old name was a bit odd.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:36 -07:00
Palmer Dabbelt
b2f8cfa7ac
RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid
It's a bit confusing exactly what this function does: it actually
returns the hartid of an OF processor node, failing with -1 on invalid
nodes.  I've changed the name to _hartid() in order to make that a bit
more clear, as well as adding a comment.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:36 -07:00
Palmer Dabbelt
9639a44394
RISC-V: Provide a cleaner raw_smp_processor_id()
I'm not sure how I managed to miss this the first time, but this is much
better.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting and other fixes]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:36 -07:00
Atish Patra
6db170ff4c
RISC-V: Disable preemption before enabling interrupts
Currently, irq is enabled before preemption disabling happens.
If the scheduler fired right here and cpu is scheduled then it
may blow up.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: Commit text and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:36 -07:00
Palmer Dabbelt
b18d6f0525
RISC-V: Comment on the TLB flush in smp_callin()
This isn't readily apparent from reading the code.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:36 -07:00
Palmer Dabbelt
19ccf29bb1
RISC-V: Filter ISA and MMU values in cpuinfo
We shouldn't be directly passing device tree values to userspace, both
because there could be mistakes in device trees and because the kernel
doesn't support arbitrary ISAs.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: checkpatch fix and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:35 -07:00
Palmer Dabbelt
566d6c428e
RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
These are just hard coded in the RISC-V port, which doesn't make any
sense.  We should probably be setting these from device tree entries
when they exist, but for now I think it's saner to just leave them all
as their default values.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:35 -07:00
Anup Patel
1ed4237ab6
RISC-V: No need to pass scause as arg to do_IRQ()
The scause is already part of pt_regs so no need to pass
scause as separate arg to do_IRQ().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:03:35 -07:00
Vincent Chen
827a438156
RISC-V: Avoid corrupting the upper 32-bit of phys_addr_t in ioremap
For 32bit, the upper 32-bit of phys_addr_t will be flushed to zero
after AND with PAGE_MASK because the data type of PAGE_MASK is
unsigned long. To fix this problem, the page alignment is done by
subtracting the page offset instead of AND with PAGE_MASK.

Signed-off-by: Vincent Chen <vincentc@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:56 -07:00
Zong Li
757331db92
RISC-V: Select GENERIC_LIB_UMODDI3 on RV32
On 32-bit, it need to use __umoddi3 by some drivers.

Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:56 -07:00
Zong Li
6315730e9e
lib: Add umoddi3 and udivmoddi4 of GCC library routines
Add umoddi3 and udivmoddi4 support for 32-bit.

The RV32 need the umoddi3 to do modulo when the operands are long long
type, like other libraries implementation such as ucmpdi2, lshrdi3 and
so on.

I encounter the undefined reference 'umoddi3' when I use the in
house dma driver, although it is in house driver, but I think that
umoddi3 is a common function for RV32.

The udivmoddi4 and umoddi3 are copies from libgcc in gcc. There are other
functions use the udivmoddi4 in libgcc, so I separate the umoddi3 and
udivmoddi4 for flexible extension in the future.

Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:56 -07:00
Zong Li
51858aaf9b
RISC-V: Use swiotlb on RV64 only
Only RV64 supports swiotlb. On RV32, it don't select the SWIOTLB.

Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:56 -07:00
Zong Li
7f47c73b35
RISC-V: Build tishift only on 64-bit
Only RV64 supports 128 integer size.

Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:55 -07:00
Alan Kao
9411ec60c2
Auto-detect whether a FPU exists
We expect that a kernel with CONFIG_FPU=y can still support no-FPU
machines. To do so, the kernel should first examine the existence of a
FPU, then do nothing if a FPU does exist; otherwise, it should
disable/bypass all FPU-related functions.

In this patch, a new global variable, has_fpu, is created and determined
when parsing the hardware capability from device tree during booting.
This variable is used in those FPU-related functions.

Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:23 -07:00
Alan Kao
9671f70614
Allow to disable FPU support
FPU codes have been separated from common part in previous patches.
This patch add the CONFIG_FPU option and some stubs, so that a no-FPU
configuration is allowed.

Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:23 -07:00
Alan Kao
e8be530233
Cleanup ISA string setting
This patch cleanup the MARCH string passing to both compiler and
assembler.  Note that the CFLAGS should not contain "fd" before we
have mechnisms like kernel_fpu_begin/end in other architectures.

Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:23 -07:00
Alan Kao
007f5c3589
Refactor FPU code in signal setup/return procedures
FPU-related logic is separated from normal signal handling path in
this patch.  Kernel can easily be configured to exclude those procedures
for no-FPU systems.

Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:23 -07:00
Alan Kao
e68ad867f7
Extract FPU context operations from entry.S
We move __fstate_save and __fstate_restore to a new source
file, fpu.S.

Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22 17:02:22 -07:00
Linus Torvalds
b8e445b689 hwmon updates for v4.20
- Add support for trace events to hwmon core
 - Add support for NCT6797D, NCT6798D, MAX31725/6, LTM4686
 - Support all AMD Family 15h Model 6xh and Model 7xh processors
   in k10temp driver
 - Convert ina3221 driver to _info API
 - Fixes, cleanups, and improvements in various drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIbBAABAgAGBQJbyVR3AAoJEMsfJm/On5mB7zgP92NONVqvIBBFRj7ohjhz4iya
 y/8ITclQvxMzgrBTuYS9avA9NACKtaerfpiS8m4XjrKAt66/x2h6yTGRVKEDTqXA
 Qs9OZG83tocBYqZ3EI3FtMhbx3eOIdCj+v34ARNqPZSXJGkpiKa+9BmjR2VuMCtG
 ONcnk66os4g7rjgsBqYUqCkAQkse/Oys6iMPpg4VfZlL6/sKWCglsQVCqplW7dFR
 wxZtJqKYHNE4sddtT67cVaxKcuNdt96EmEoJCGirH0B2wW7FPefR4sYO9cmykDi+
 J6b7VErHWSi75LrXVZaXHllkau3NvZDCoGyVbVPu98w4TzjylCXciskOmXdTQkso
 57I2aPMUa4VLde27p/a3MLUXhswFng2w62rz2l/BLlWq4KbTorPZxnKrHT8EpU7T
 eQrLC5Q+mdJCRdhcDQEcx8+SKtdO9UFLUFD5xb2D74ZJ4N2DYYFa62Vr9I6Mk+AV
 aZa5wLQW6W5UY8+AcbhK2AJE60LiPaJsuobiLLwZ/5cB2M33Hgi0ySDkq/Y4fFjA
 t/D5iWDVhbwbK15baJyJEAlNQAM+Nr284RGfWTfHhqKxmx3/fIKw5OBjsRzIP5KV
 NN5JA8s8tuLP10MIY+jXRTu2knkTKQXgWp8YLuS8gI0meCiGt2fZ8kXXW5b9T5+F
 sH7cZuCGf+PRkEeYp8o=
 =Urmz
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - Add support for trace events to hwmon core

 - Add support for NCT6797D, NCT6798D, MAX31725/6, LTM4686

 - Support all AMD Family 15h Model 6xh and Model 7xh processors in
   k10temp driver

 - Convert ina3221 driver to _info API

 - Fixes, cleanups, and improvements in various drivers

* tag 'hwmon-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (46 commits)
  hwmon: (pmbus) Fix page count auto-detection.
  hwmon: (pmbus) remove redundant 'default n' from Kconfig
  hwmon: (core) Add trace events to _attr_show/store functions
  hwmon: (ina3221) Use _info API to register hwmon device
  hwmon: (npcm-750-pwm-fan) Change initial pwm target to 255
  hwmon: (ina3221) Validate shunt resistor value from DT
  hwmon: (tmp421) make const array 'names' static
  hwmon: (core) Add hwmon_in_enable attribute
  hwmon: (ina3221) mark PM functions as __maybe_unused
  hwmon: (ina3221) Read channel input source info from DT
  dt-bindings: hwmon: Add ina3221 documentation
  hwmon: (ina3221) Add suspend and resume functions
  hwmon: (ina3221) Fix INA3221_CONFIG_MODE macros
  hwmon: (ina3221) Add INA3221_CONFIG to volatile_table
  MAINTAINERS: Update PMBUS maintainer entry
  hwmon: (pwm-fan) Set fan speed to 0 on suspend
  hwmon: (pwm-fan) Silence error on probe deferral
  hwmon: (scpi-hwmon) remove redundant continue
  hwmon: (nct6775) Add support for NCT6798D
  hwmon: (nct6775) Add support for NCT6797D
  ...
2018-10-23 00:58:12 +01:00