The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106154807.3866712-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106154807.3866712-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and also slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __refdata which
is needed to suppress a (W=1) modpost warning:
WARNING: modpost: drivers/watchdog/txx9wdt: section mismatch in reference: txx9wdt_driver+0x4 (section: .data) -> txx9wdt_remove (section: .exit.text)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106154807.3866712-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and also slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __refdata which
is needed to suppress a (W=1) modpost warning:
WARNING: modpost: drivers/watchdog/at91sam9_wdt: section mismatch in reference: at91wdt_driver+0x4 (section: .data) -> at91wdt_remove (section: .exit.text)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106154807.3866712-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Commit bd888a4377 ("dt-bindings: watchdog: da9062-wdt: convert txt to
yaml") converts da9062-wdt.txt to dlg,da9062-watchdog.yaml, but misses to
adjust its reference in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file pattern in DIALOG SEMICONDUCTOR DRIVERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106095349.9564-1-lukas.bulwahn@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered.
Update the example in the bindings.
Fixes: 7c631cdff3 ("dt-bindings: watchdog: qcom-wdt: allow interrupts")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106144335.v2.9.Ie30c1d3f780666f6906fd2fd7c437632c229d987@changeid
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
When the new watchdog character device is registered, it becomes
available for opening. This creates a race where userspace may open the
device before the character device's owner is set. This results in an
imbalance in module_get calls as the cdev_get in cdev_open will not
increment the reference count on the watchdog driver module.
This causes problems when the watchdog character device is released as
the module loader's reference will also be released. This makes it
impossible to open the watchdog device later on as it now appears that
the module is being unloaded. The open will fail with -ENXIO from
chrdev_open.
The legacy watchdog device will fail with -EBUSY from the try_module_get
in watchdog_open because it's module owner is the watchdog core module
so it can still be opened but it will fail to get a refcount on the
underlying watchdog device driver.
Fixes: 72139dfa24 ("watchdog: Fix the race between the release of watchdog_core_data and cdev")
Signed-off-by: Curtis Klein <curtis.klein@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231205190522.55153-1-curtis.klein@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The ad7091r-base driver sets up an interrupt handler for firing events
when inputs are either above or below a certain threshold.
However, for the interrupt signal to come from the device it must be
configured to enable the ALERT/BUSY/GPO pin to be used as ALERT, which
was not being done until now.
Enable interrupt signals on the ALERT/BUSY/GPO pin by setting the proper
bit in the configuration register.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/e8da2ee98d6df88318b14baf3dc9630e20218418.1702746240.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Previous version of ad7091r event handler received the ADC state pointer
and retrieved the iio device from driver data field with dev_get_drvdata().
However, no driver data have ever been set, which led to null pointer
dereference when running the event handler.
Pass the iio device to the event handler and retrieve the ADC state struct
from it so we avoid the null pointer dereference and save the driver from
filling the driver data field.
Fixes: ca69300173 ("iio: adc: Add support for AD7091R5 ADC")
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/5024b764107463de9578d5b3b0a3d5678e307b1a.1702746240.git.marcelo.schmitt1@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Checkpatch presumes attributes marked with __aligned(alignment) are part
of a function declaration and throws a warning stating that those
compiler attributes should have an identifier name which is not correct.
Add __aligned compiler attributes to the list of attribute notes
so they don't cause warnings anymore.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Acked-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/1c5c93ecbd8c46a338b22a4ef52e51648e333c01.1702746240.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A simple driver for the TVOC (Total Volatile Organic Compounds)
sensor from Aosong: AGS02MA
Steps in reading the VOC sensor value over i2c:
1. Read 5 bytes from the register `AGS02MA_TVOC_READ_REG` [0x00]
2. The first 4 bytes are taken as the big endian sensor data with final
byte being the CRC
3. The CRC is verified and the value is returned over an
`IIO_CHAN_INFO_RAW` channel as percents
Tested on Raspberry Pi Zero 2W
Datasheet: https://asairsensors.com/wp-content/uploads/2021/09/AGS02MA.pdf
Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
Link: https://lore.kernel.org/r/20231215162312.143568-3-anshulusr@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Aosong Electronic Co., LTD. is a supplier for MEMS sensors such as AHT20
temperature and humidity sensor under the brand name Asair
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
Link: https://lore.kernel.org/r/20231215162312.143568-1-anshulusr@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
update the comments and Kconfig file with more descriptive and
accurate information about newly added device: BMI085, BMI090L.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Gen P7 adapters needs to share a toggle bits information received
in kernel driver with the user space. User space needs this
info during the request notify call back to arm the CQ.
User space application can get this page using the
UAPI routines. Library will mmap this page and get the
toggle bits to be used in the next ARM Doorbell.
Uses a hash list to map the CQ structure from the CQ ID.
CQ structure is retrieved from the hash list while the
library calls the UAPI routine to get the toggle page
mapping. Currently the full page is mapped per CQ. This
can be optimized to enable multiple CQs from the same
application share the same page and different offsets
in the page.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1702535484-26844-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Gen P7 adapters require to share a toggle value for CQ
and SRQ. This is received by the driver as part of
interrupt notifications and needs to be shared with the
user space. Add a new UAPI infrastructure to get the
shared page for CQ and SRQ.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1702535484-26844-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Make gb-beagleplay greybus spec compliant by moving cport information to
transport layer instead of using `header->pad` bytes.
Greybus HDLC frame now has the following payload:
1. le16 cport
2. gb_operation_msg_hdr msg_header
3. u8 *msg_payload
Fixes: ec558bbfea ("greybus: Add BeaglePlay Linux Driver")
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Link: https://lore.kernel.org/r/20231217121133.74703-2-ayushdevel1325@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If you select CONFIG_EFI_ZBOOT, we will generate vmlinuz.efi, and then
when we go to install the kernel we'll install the vmlinux instead
because install.sh only recognizes Image.gz as wanting the compressed
install image. With CONFIG_EFI_ZBOOT we don't get the proper kernel
installed, which means it doesn't boot, which makes for a very confused
and subsequently angry kernel developer.
Fix this by properly installing our compressed kernel if we've enabled
CONFIG_EFI_ZBOOT.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Cc: <stable@vger.kernel.org> # 6.1.x
Fixes: c37b830fef ("arm64: efi: enable generic EFI compressed boot")
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/6edb1402769c2c14c4fbef8f7eaedb3167558789.1702570674.git.josef@toxicpanda.com
Signed-off-by: Will Deacon <will@kernel.org>
Add the definitions of missing system instructions that are
trappable by fine grain traps. The definitions are based on
DDI0602 2023-09.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231214100158.2305400-5-tabba@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Add the definitions of missing system registers that are
trappable by fine grain traps. The definitions are based on
DDI0601 2023-09.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231214100158.2305400-4-tabba@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Add the ExtTrcBuff field definitions to ID_AA64DFR0_EL1 from
DDI0601 2023-09.
This field isn't used yet. Adding it for completeness and because
it will be used in future patches.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231214100158.2305400-3-tabba@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Add the Pauth_LR field definitions to ID_AA64ISAR1_EL1, based on
DDI0601 2023-09.
These fields aren't used yet. Adding them for completeness and
consistency (definition already exists for ID_AA64ISAR2_EL1).
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231214100158.2305400-2-tabba@google.com
Signed-off-by: Will Deacon <will@kernel.org>
LLVM ignores everything inside the if statement and doesn't generate
errors, but GCC doesn't ignore it, resulting in the following error:
drivers/perf/arm_pmuv3.c: In function ‘armv8pmu_write_evtype’:
include/linux/bits.h:34:29: error: left shift count >= width of type [-Werror=shift-count-overflow]
34 | (((~UL(0)) - (UL(1) << (l)) + 1) & \
Fix it by using GENMASK_ULL which doesn't overflow on arm32 (even though
the value is never used there).
Fixes: 3115ee021b ("arm64: perf: Include threshold control fields in PMEVTYPER mask")
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Closes: https://lore.kernel.org/linux-arm-kernel/20231215120817.h2f3akgv72zhrtqo@pengutronix.de/
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231215175648.3397170-2-james.clark@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
syzbot excercised the forbidden practice of moving the workdir under
lowerdir while overlayfs is mounted and tripped a dentry reference leak.
Fixes: c63e56a4a6 ("ovl: do not open/llseek lower file with upper sb_writers held")
Reported-and-tested-by: syzbot+8608bb4553edb8c78f41@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
We have new features only for ath12k but lots of small cleanup for
ath10k, ath11k and ath12k. And of course smaller fixes to several
drivers.
Major changes:
ath12k
* support one MSI vector
* WCN7850: support AP mode
-----BEGIN PGP SIGNATURE-----
iQFLBAABCgA1FiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmV8odsXHHF1aWNfa3Zh
bG9AcXVpY2luYy5jb20ACgkQbhckVSbrbZu1hgf9H+4qF8EvxpDPqse5ynDfUqeq
sStOSAWtNvwqTLlCeHHOc5xpuifNo9ff9J59mb2WrRo6gO0PY0meTxQYPgaq1xZF
lA4tW8yVpcyO+d3CCpFPWUOx0pbJW7UTzFl5A5TDCfGiY1ypFEGUzxnztvHfdY4L
rIjWGAFEsVRGDNM2QVNsfhGm3DbXIKm+9XzhhNlNspaZ0/GS+E9BcXwSyKP5G77A
MG9oRTIM++tdkCiJAId8Wt0AwBTGGuik5QnRb8JVsbBeigdWuUU6otXTc3WonzJE
93OEOcYJvmQgr5KLyk9euXJ7XVmwnn2JYY9jwPRSgZKvU3PkvxAALLYwMxOW8w==
=5NRj
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20231215' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
ath.git patches for v6.8.
We have new features only for ath12k but lots of small cleanup for
ath10k, ath11k and ath12k. And of course smaller fixes to several
drivers.
Major changes:
ath12k
* support one MSI vector
* WCN7850: support AP mode
Transform zero-length arrays `rate`, `adm_stat` and `msdu_cnt` into
proper flexible-array members in anonymous union in `struct
mt7996_mcu_all_sta_info_event` via the DECLARE_FLEX_ARRAY()
helper; and fix multiple -Warray-bounds warnings:
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:544:61: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=]
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:551:58: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=]
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:553:58: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=]
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:530:61: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=]
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:538:66: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=]
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:540:66: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=]
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:520:57: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=]
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:526:76: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=]
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:526:76: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=]
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:526:76: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=]
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:526:76: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=]
This results in no differences in binary output, helps with the ongoing
efforts to globally enable -Warray-bounds.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/ZXiU9ayVCslt3qiI@work
Liang Chen says:
====================
skbuff: Optimize SKB coalescing for page pool
The combination of the following condition was excluded from skb coalescing:
from->pp_recycle = 1
from->cloned = 1
to->pp_recycle = 1
With page pool in use, this combination can be quite common(ex.
NetworkMananger may lead to the additional packet_type being registered,
thus the cloning). In scenarios with a higher number of small packets, it
can significantly affect the success rate of coalescing.
This patchset aims to optimize this scenario and enable coalescing of this
particular combination. That also involves supporting multiple users
referencing the same fragment of a pp page to accomondate the need to
increment the "from" SKB page's pp page reference count.
Changes from v10:
- re-number patches to 1/3, 2/3, 3/3
Changes from v9:
- patch 1 was already applied
- imporve description for patch 2
- make sure skb_pp_frag_ref only work for pp aware skbs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to address the issues encountered with commit 1effe8ca4e
("skbuff: fix coalescing for page_pool fragment recycling"), the
combination of the following condition was excluded from skb coalescing:
from->pp_recycle = 1
from->cloned = 1
to->pp_recycle = 1
However, with page pool environments, the aforementioned combination can
be quite common(ex. NetworkMananger may lead to the additional
packet_type being registered, thus the cloning). In scenarios with a
higher number of small packets, it can significantly affect the success
rate of coalescing. For example, considering packets of 256 bytes size,
our comparison of coalescing success rate is as follows:
Without page pool: 70%
With page pool: 13%
Consequently, this has an impact on performance:
Without page pool: 2.57 Gbits/sec
With page pool: 2.26 Gbits/sec
Therefore, it seems worthwhile to optimize this scenario and enable
coalescing of this particular combination. To achieve this, we need to
ensure the correct increment of the "from" SKB page's page pool
reference count (pp_ref_count).
Following this optimization, the success rate of coalescing measured in
our environment has improved as follows:
With page pool: 60%
This success rate is approaching the rate achieved without using page
pool, and the performance has also been improved:
With page pool: 2.52 Gbits/sec
Below is the performance comparison for small packets before and after
this optimization. We observe no impact to packets larger than 4K.
packet size before after improved
(bytes) (Gbits/sec) (Gbits/sec)
128 1.19 1.27 7.13%
256 2.26 2.52 11.75%
512 4.13 4.81 16.50%
1024 6.17 6.73 9.05%
2048 14.54 15.47 6.45%
4096 25.44 27.87 9.52%
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wrap code for checking if a page is a page_pool page into a
function for better readability and ease of reuse.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Mina Almasry <almarsymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Up to now, we were only subtracting from the number of used page fragments
to figure out when a page could be freed or recycled. A following patch
introduces support for multiple users referencing the same fragment. So
reduce the initial page fragments value to half to avoid overflowing.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Mina Almasry <almarsymina@google.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Safonov says:
====================
selftests/net: Add TCP-AO tests
An essential part of any big kernel submissions is selftests.
At the beginning of TCP-AO project, I made patches to fcnal-test.sh
and nettest.c to have the benefits of easy refactoring, early noticing
breakages, putting a moat around the code, documenting
and designing uAPI.
While tests based on fcnal-test.sh/nettest.c provided initial testing*
and were very easy to add, the pile of TCP-AO quickly grew out of
one-binary + shell-script testing.
The design of the TCP-AO testing is a bit different than one-big
selftest binary as I did previously in net/ipsec.c. I found it
beneficial to avoid implementing a tests runner/scheduler and delegate
it to the user or Makefile. The approach is very influenced
by CRIU/ZDTM testing[1]: it provides a static library with helper
functions and selftest binaries that create specific scenarios.
I also tried to utilize kselftest.h.
test_init() function does all needed preparations. To not leave
any traces after a selftest exists, it creates a network namespace
and if the test wants to establish a TCP connection, a child netns.
The parent and child netns have veth pair with proper ip addresses
and routes set up. Both peers, the client and server are different
pthreads. The treading model was chosen over forking mostly by easiness
of cleanup on a failure: no need to search for children, handle SIGCHLD,
make sure not to wait for a dead peer to perform anything, etc.
Any thread that does exit() naturally kills the tests, sweet!
The selftests are compiled currently in two variants: ipv4 and ipv6.
Ipv4-mapped-ipv6 addresses might be a third variant to add, but it's not
there in this version. As pretty much all tests are shared between two
address families, most of the code can be shared, too. To differ in code
what kind of test is running, Makefile supplies -DIPV6_TEST to compiler
and ifdeffery in tests can do things that have to be different between
address families. This is similar to TARGETS_C_BOTHBITS in x86 selftests
and also to tests code sharing in CRIU/ZDTM.
The total number of tests is 832.
From them rst_ipv{4,6} has currently one flaky subtest, that may fail:
> not ok 9 client connection was not reset: 0
I'll investigate what happens there. Also, unsigned-md5_ipv{4,6}
are flaky because of netns counter checks: it doesn't expect that
there may be retransmitted TCP segments from a previous sub-selftest.
That will be fixed. Besides, key-management_ipv{4,6} has 3 sub-tests
passing with XFAIL:
> ok 15 # XFAIL listen() after current/rnext keys set: the socket has current/rnext keys: 100:200
> ok 16 # XFAIL listen socket, delete current key from before listen(): failed to delete the key 100:100 -16
> ok 17 # XFAIL listen socket, delete rnext key from before listen(): failed to delete the key 200:200 -16
...
> # Totals: pass:117 fail:0 xfail:3 xpass:0 skip:0 error:0
Those need some more kernel work to pass instead of xfail.
The overview of selftests (see the diffstat at the bottom):
├── lib
│ ├── aolib.h
│ │ The header for all selftests to include.
│ ├── kconfig.c
│ │ Kernel kconfig detector to SKIP tests that depend on something.
│ ├── netlink.c
│ │ Netlink helper to add/modify/delete VETH/IPs/routes/VRFs
│ │ I considered just using libmnl, but this is around 400 lines
│ │ and avoids selftests dependency on out-of-tree sources/packets.
│ ├── proc.c
│ │ SNMP/netstat procfs parser and the counters comparator.
│ ├── repair.c
│ │ Heavily influenced by libsoccr and reduced to minimum TCP
│ │ socket checkpoint/repair. Shouldn't be used out of selftests,
│ │ though.
│ ├── setup.c
│ │ All the needed netns/veth/ips/etc preparations for test init.
│ ├── sock.c
│ │ Socket helpers: {s,g}etsockopt()s/connect()/listen()/etc.
│ └── utils.c
│ Random stuff (a pun intended).
├── bench-lookups.c
│ The only benchmark in selftests currently: checks how well TCP-AO
│ setsockopt()s perform, depending on the amount of keys on a socket.
├── connect.c
│ Trivial sample, can be used as a boilerplate to write a new test.
├── connect-deny.c
│ More-or-less what could be expected for TCP-AO in fcnal-test.sh
├── icmps-accept.c -> icmps-discard.c
├── icmps-discard.c
│ Verifies RFC5925 (7.8) by checking that TCP-AO connection can be
│ broken if ICMPs are accepted and survives when ::accept_icmps = 0
├── key-management.c
│ Key manipulations, rotations between randomized hashing algorithms
│ and counter checks for those scenarios.
├── restore.c
│ TCP_AO_REPAIR: verifies that a socket can be re-created without
│ TCP-AO connection being interrupted.
├── rst.c
│ As RST segments are signed on a separate code-path in kernel,
│ verifies passive/active TCP send_reset().
├── self-connect.c
│ Verifies that TCP self-connect and also simultaneous open work.
├── seq-ext.c
│ Utilizes TCP_AO_REPAIR to check that on SEQ roll-over SNE
│ increment is performed and segments with different SNEs fail to
│ pass verification.
├── setsockopt-closed.c
│ Checks that {s,g}etsockopt()s are extendable syscalls and common
│ error-paths for them.
└── unsigned-md5.c
Checks listen() socket for (non-)matching peers with: AO/MD5/none
keys. As well as their interaction with VRFs and AO_REQUIRED flag.
There are certainly more test scenarios that can be added, but even so,
I'm pretty happy that this much of TCP-AO functionality and uAPIs got
covered. These selftests were iteratively developed by me during TCP-AO
kernel upstreaming and the resulting kernel patches would have been
worse without having these tests. They provided the user-side
perspective but also allowed safer refactoring with less possibility
of introducing a regression. Now it's time to use them to dig
a moat around the TCP-AO code!
There are also people from other network companies that work on TCP-AO
(+testing), so sharing these selftests will allow them to contribute
and may benefit from their efforts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Check multiple keys on a socket:
- rotation on closed socket
- current/rnext operations shouldn't be possible on listen sockets
- current/rnext key set should be the one, that's used on connect()
- key rotations with pseudo-random generated keys
- copying matching keys on connect() and on accept()
At this moment there are 3 tests that are "expected" to fail: a kernel
fix is needed to improve the situation, they are marked XFAIL.
Sample output:
> # ./key-management_ipv4
> 1..120
> # 1601[lib/setup.c:239] rand seed 1700526653
> TAP version 13
> ok 1 closed socket, delete a key: the key was deleted
> ok 2 closed socket, delete all keys: the key was deleted
> ok 3 closed socket, delete current key: key deletion was prevented
> ok 4 closed socket, delete rnext key: key deletion was prevented
> ok 5 closed socket, delete a key + set current/rnext: the key was deleted
> ok 6 closed socket, force-delete current key: the key was deleted
> ok 7 closed socket, force-delete rnext key: the key was deleted
> ok 8 closed socket, delete current+rnext key: key deletion was prevented
> ok 9 closed socket, add + change current key
> ok 10 closed socket, add + change rnext key
> ok 11 listen socket, delete a key: the key was deleted
> ok 12 listen socket, delete all keys: the key was deleted
> ok 13 listen socket, setting current key not allowed
> ok 14 listen socket, setting rnext key not allowed
> ok 15 # XFAIL listen() after current/rnext keys set: the socket has current/rnext keys: 100:200
> ok 16 # XFAIL listen socket, delete current key from before listen(): failed to delete the key 100:100 -16
> ok 17 # XFAIL listen socket, delete rnext key from before listen(): failed to delete the key 200:200 -16
> ok 18 listen socket, getsockopt(TCP_AO_REPAIR) is restricted
> ok 19 listen socket, setsockopt(TCP_AO_REPAIR) is restricted
> ok 20 listen socket, delete a key + set current/rnext: key deletion was prevented
> ok 21 listen socket, force-delete current key: key deletion was prevented
> ok 22 listen socket, force-delete rnext key: key deletion was prevented
> ok 23 listen socket, delete a key: the key was deleted
> ok 24 listen socket, add + change current key
> ok 25 listen socket, add + change rnext key
> ok 26 server: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations
> ok 27 client: Check current/rnext keys unset before connect(): current key 19 as expected
> ok 28 client: Check current/rnext keys unset before connect(): rnext key 146 as expected
> ok 29 server: Check current/rnext keys unset before connect(): server alive
> ok 30 server: Check current/rnext keys unset before connect(): passed counters checks
> ok 31 client: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations
> ok 32 server: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations
> ok 33 server: Check current/rnext keys unset before connect(): passed counters checks
> ok 34 client: Check current/rnext keys unset before connect(): passed counters checks
> ok 35 server: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 36 server: Check current/rnext keys set before connect(): server alive
> ok 37 server: Check current/rnext keys set before connect(): passed counters checks
> ok 38 client: Check current/rnext keys set before connect(): current key 10 as expected
> ok 39 client: Check current/rnext keys set before connect(): rnext key 137 as expected
> ok 40 server: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 41 client: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 42 client: Check current/rnext keys set before connect(): passed counters checks
> ok 43 server: Check current/rnext keys set before connect(): passed counters checks
> ok 44 server: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 45 server: Check current != rnext keys set before connect(): server alive
> ok 46 server: Check current != rnext keys set before connect(): passed counters checks
> ok 47 client: Check current != rnext keys set before connect(): current key 10 as expected
> ok 48 client: Check current != rnext keys set before connect(): rnext key 132 as expected
> ok 49 server: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 50 client: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 51 client: Check current != rnext keys set before connect(): passed counters checks
> ok 52 server: Check current != rnext keys set before connect(): passed counters checks
> ok 53 server: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations
> ok 54 server: Check current flapping back on peer's RnextKey request: server alive
> ok 55 server: Check current flapping back on peer's RnextKey request: passed counters checks
> ok 56 client: Check current flapping back on peer's RnextKey request: current key 10 as expected
> ok 57 client: Check current flapping back on peer's RnextKey request: rnext key 132 as expected
> ok 58 server: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations
> ok 59 client: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations
> ok 60 server: Check current flapping back on peer's RnextKey request: passed counters checks
> ok 61 client: Check current flapping back on peer's RnextKey request: passed counters checks
> ok 62 server: Rotate over all different keys: The socket keys are consistent with the expectations
> ok 63 server: Rotate over all different keys: server alive
> ok 64 server: Rotate over all different keys: passed counters checks
> ok 65 server: Rotate over all different keys: current key 128 as expected
> ok 66 client: Rotate over all different keys: rnext key 128 as expected
> ok 67 server: Rotate over all different keys: current key 129 as expected
> ok 68 client: Rotate over all different keys: rnext key 129 as expected
> ok 69 server: Rotate over all different keys: current key 130 as expected
> ok 70 client: Rotate over all different keys: rnext key 130 as expected
> ok 71 server: Rotate over all different keys: current key 131 as expected
> ok 72 client: Rotate over all different keys: rnext key 131 as expected
> ok 73 server: Rotate over all different keys: current key 132 as expected
> ok 74 client: Rotate over all different keys: rnext key 132 as expected
> ok 75 server: Rotate over all different keys: current key 133 as expected
> ok 76 client: Rotate over all different keys: rnext key 133 as expected
> ok 77 server: Rotate over all different keys: current key 134 as expected
> ok 78 client: Rotate over all different keys: rnext key 134 as expected
> ok 79 server: Rotate over all different keys: current key 135 as expected
> ok 80 client: Rotate over all different keys: rnext key 135 as expected
> ok 81 server: Rotate over all different keys: current key 136 as expected
> ok 82 client: Rotate over all different keys: rnext key 136 as expected
> ok 83 server: Rotate over all different keys: current key 137 as expected
> ok 84 client: Rotate over all different keys: rnext key 137 as expected
> ok 85 server: Rotate over all different keys: current key 138 as expected
> ok 86 client: Rotate over all different keys: rnext key 138 as expected
> ok 87 server: Rotate over all different keys: current key 139 as expected
> ok 88 client: Rotate over all different keys: rnext key 139 as expected
> ok 89 server: Rotate over all different keys: current key 140 as expected
> ok 90 client: Rotate over all different keys: rnext key 140 as expected
> ok 91 server: Rotate over all different keys: current key 141 as expected
> ok 92 client: Rotate over all different keys: rnext key 141 as expected
> ok 93 server: Rotate over all different keys: current key 142 as expected
> ok 94 client: Rotate over all different keys: rnext key 142 as expected
> ok 95 server: Rotate over all different keys: current key 143 as expected
> ok 96 client: Rotate over all different keys: rnext key 143 as expected
> ok 97 server: Rotate over all different keys: current key 144 as expected
> ok 98 client: Rotate over all different keys: rnext key 144 as expected
> ok 99 server: Rotate over all different keys: current key 145 as expected
> ok 100 client: Rotate over all different keys: rnext key 145 as expected
> ok 101 server: Rotate over all different keys: current key 146 as expected
> ok 102 client: Rotate over all different keys: rnext key 146 as expected
> ok 103 server: Rotate over all different keys: current key 127 as expected
> ok 104 client: Rotate over all different keys: rnext key 127 as expected
> ok 105 client: Rotate over all different keys: current key 0 as expected
> ok 106 client: Rotate over all different keys: rnext key 127 as expected
> ok 107 server: Rotate over all different keys: The socket keys are consistent with the expectations
> ok 108 client: Rotate over all different keys: The socket keys are consistent with the expectations
> ok 109 client: Rotate over all different keys: passed counters checks
> ok 110 server: Rotate over all different keys: passed counters checks
> ok 111 server: Check accept() => established key matching: The socket keys are consistent with the expectations
> ok 112 Can't add a key with non-matching ip-address for established sk
> ok 113 Can't add a key with non-matching VRF for established sk
> ok 114 server: Check accept() => established key matching: server alive
> ok 115 server: Check accept() => established key matching: passed counters checks
> ok 116 client: Check connect() => established key matching: current key 0 as expected
> ok 117 client: Check connect() => established key matching: rnext key 128 as expected
> ok 118 client: Check connect() => established key matching: The socket keys are consistent with the expectations
> ok 119 server: Check accept() => established key matching: The socket keys are consistent with the expectations
> ok 120 server: Check accept() => established key matching: passed counters checks
> # Totals: pass:120 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check that a rare functionality of TCP named self-connect works with
TCP-AO. This "under the cover" also checks TCP simultaneous connect
(TCP_SYN_RECV socket state), which would be harder to check other ways.
In order to verify that it's indeed TCP simultaneous connect, check
the counters TCPChallengeACK and TCPSYNChallenge.
Sample of the output:
> # ./self-connect_ipv6
> 1..4
> # 1738[lib/setup.c:254] rand seed 1696451931
> TAP version 13
> ok 1 self-connect(same keyids): connect TCPAOGood 0 => 24
> ok 2 self-connect(different keyids): connect TCPAOGood 26 => 50
> ok 3 self-connect(restore): connect TCPAOGood 52 => 97
> ok 4 self-connect(restore, different keyids): connect TCPAOGood 99 => 144
> # Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check that both active and passive reset works and correctly sign
segments with TCP-AO or don't send RSTs if not possible to sign.
A listening socket with backlog = 0 gets one connection in accept
queue, another in syn queue. Once the server/listener socket is
forcibly closed, client sockets aren't connected to anything.
In regular situation they would receive RST on any segment, but
with TCP-AO as there's no listener, no AO-key and unknown ISNs,
no RST should be sent.
And "passive" reset, where RST is sent on reply for some segment
(tcp_v{4,6}_send_reset()) - there use TCP_REPAIR to corrupt SEQ numbers,
which later results in TCP-AO signed RST, which will be verified and
client socket will get EPIPE.
No TCPAORequired/TCPAOBad segments are expected during these tests.
Sample of the output:
> # ./rst_ipv4
> 1..15
> # 1462[lib/setup.c:254] rand seed 1686611171
> TAP version 13
> ok 1 servered 1000 bytes
> ok 2 Verified established tcp connection
> ok 3 sk[0] = 7, connection was reset
> ok 4 sk[1] = 8, connection was reset
> ok 5 sk[2] = 9
> ok 6 MKT counters are good on server
> ok 7 Verified established tcp connection
> ok 8 client connection broken post-seq-adjust
> ok 9 client connection was reset
> ok 10 No segments without AO sign (server)
> ok 11 Signed AO segments (server): 0 => 30
> ok 12 No segments with bad AO sign (server)
> ok 13 No segments without AO sign (client)
> ok 14 Signed AO segments (client): 0 => 30
> ok 15 No segments with bad AO sign (client)
> # Totals: pass:15 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check that on SEQ number wraparound there is no disruption or TCPAOBad
segments produced.
Sample of expected output:
> # ./seq-ext_ipv4
> 1..7
> # 1436[lib/setup.c:254] rand seed 1686611079
> TAP version 13
> ok 1 server alive
> ok 2 post-migrate connection alive
> ok 3 TCPAOGood counter increased 1002 => 3002
> ok 4 TCPAOGood counter increased 1003 => 3003
> ok 5 TCPAOBad counter didn't increase
> ok 6 TCPAOBad counter didn't increase
> ok 7 SEQ extension incremented: 1/1999, 1/998999
> # Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test plan is:
1. check that TCP-AO connection may be restored on another socket
2. check restore with wrong send/recv ISN (checking that they are
part of MAC generation)
3. check restore with wrong SEQ number extension (checking that
high bytes of it taken into MAC generation)
Sample output expected:
> # ./restore_ipv4
> 1..20
> # 1412[lib/setup.c:254] rand seed 1686610825
> TAP version 13
> ok 1 TCP-AO migrate to another socket: server alive
> ok 2 TCP-AO migrate to another socket: post-migrate connection is alive
> ok 3 TCP-AO migrate to another socket: counter TCPAOGood increased 23 => 44
> ok 4 TCP-AO migrate to another socket: counter TCPAOGood increased 22 => 42
> ok 5 TCP-AO with wrong send ISN: server couldn't serve
> ok 6 TCP-AO with wrong send ISN: post-migrate connection is broken
> ok 7 TCP-AO with wrong send ISN: counter TCPAOBad increased 0 => 4
> ok 8 TCP-AO with wrong send ISN: counter TCPAOBad increased 0 => 3
> ok 9 TCP-AO with wrong receive ISN: server couldn't serve
> ok 10 TCP-AO with wrong receive ISN: post-migrate connection is broken
> ok 11 TCP-AO with wrong receive ISN: counter TCPAOBad increased 4 => 8
> ok 12 TCP-AO with wrong receive ISN: counter TCPAOBad increased 5 => 10
> ok 13 TCP-AO with wrong send SEQ ext number: server couldn't serve
> ok 14 TCP-AO with wrong send SEQ ext number: post-migrate connection is broken
> ok 15 TCP-AO with wrong send SEQ ext number: counter TCPAOBad increased 9 => 10
> ok 16 TCP-AO with wrong send SEQ ext number: counter TCPAOBad increased 11 => 19
> ok 17 TCP-AO with wrong receive SEQ ext number: post-migrate connection is broken
> ok 18 TCP-AO with wrong receive SEQ ext number: server couldn't serve
> ok 19 TCP-AO with wrong receive SEQ ext number: counter TCPAOBad increased 10 => 18
> ok 20 TCP-AO with wrong receive SEQ ext number: counter TCPAOBad increased 20 => 23
> # Totals: pass:20 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test plan was (most of tests have all 3 client types):
1. TCP-AO listen (INADDR_ANY)
2. TCP-MD5 listen (INADDR_ANY)
3. non-signed listen (INADDR_ANY)
4. TCP-AO + TCP-MD5 listen (prefix)
5. TCP-AO subprefix add failure [checked in setsockopt-closed.c]
6. TCP-AO out of prefix connect [checked in connect-deny.c]
7. TCP-AO + TCP-MD5 on connect()
8. TCP-AO intersect with TCP-MD5 failure
9. Established TCP-AO: add TCP-MD5 key
10. Established TCP-MD5: add TCP-AO key
11. Established non-signed: add TCP-AO key
Output produced:
> # ./unsigned-md5_ipv6
> 1..72
> # 1592[lib/setup.c:239] rand seed 1697567046
> TAP version 13
> ok 1 AO server (INADDR_ANY): AO client: counter TCPAOGood increased 0 => 2
> ok 2 AO server (INADDR_ANY): AO client: connected
> ok 3 AO server (INADDR_ANY): MD5 client
> ok 4 AO server (INADDR_ANY): MD5 client: counter TCPMD5Unexpected increased 0 => 1
> ok 5 AO server (INADDR_ANY): no sign client: counter TCPAORequired increased 0 => 1
> ok 6 AO server (INADDR_ANY): unsigned client
> ok 7 AO server (AO_REQUIRED): AO client: connected
> ok 8 AO server (AO_REQUIRED): AO client: counter TCPAOGood increased 4 => 6
> ok 9 AO server (AO_REQUIRED): unsigned client
> ok 10 AO server (AO_REQUIRED): unsigned client: counter TCPAORequired increased 1 => 2
> ok 11 MD5 server (INADDR_ANY): AO client: counter TCPAOKeyNotFound increased 0 => 1
> ok 12 MD5 server (INADDR_ANY): AO client
> ok 13 MD5 server (INADDR_ANY): MD5 client: connected
> ok 14 MD5 server (INADDR_ANY): MD5 client: no counter checks
> ok 15 MD5 server (INADDR_ANY): no sign client
> ok 16 MD5 server (INADDR_ANY): no sign client: counter TCPMD5NotFound increased 0 => 1
> ok 17 no sign server: AO client
> ok 18 no sign server: AO client: counter TCPAOKeyNotFound increased 1 => 2
> ok 19 no sign server: MD5 client
> ok 20 no sign server: MD5 client: counter TCPMD5Unexpected increased 1 => 2
> ok 21 no sign server: no sign client: connected
> ok 22 no sign server: no sign client: counter CurrEstab increased 0 => 1
> ok 23 AO+MD5 server: AO client (matching): connected
> ok 24 AO+MD5 server: AO client (matching): counter TCPAOGood increased 8 => 10
> ok 25 AO+MD5 server: AO client (misconfig, matching MD5)
> ok 26 AO+MD5 server: AO client (misconfig, matching MD5): counter TCPAOKeyNotFound increased 2 => 3
> ok 27 AO+MD5 server: AO client (misconfig, non-matching): counter TCPAOKeyNotFound increased 3 => 4
> ok 28 AO+MD5 server: AO client (misconfig, non-matching)
> ok 29 AO+MD5 server: MD5 client (matching): connected
> ok 30 AO+MD5 server: MD5 client (matching): no counter checks
> ok 31 AO+MD5 server: MD5 client (misconfig, matching AO)
> ok 32 AO+MD5 server: MD5 client (misconfig, matching AO): counter TCPMD5Unexpected increased 2 => 3
> ok 33 AO+MD5 server: MD5 client (misconfig, non-matching)
> ok 34 AO+MD5 server: MD5 client (misconfig, non-matching): counter TCPMD5Unexpected increased 3 => 4
> ok 35 AO+MD5 server: no sign client (unmatched): connected
> ok 36 AO+MD5 server: no sign client (unmatched): counter CurrEstab increased 0 => 1
> ok 37 AO+MD5 server: no sign client (misconfig, matching AO)
> ok 38 AO+MD5 server: no sign client (misconfig, matching AO): counter TCPAORequired increased 2 => 3
> ok 39 AO+MD5 server: no sign client (misconfig, matching MD5)
> ok 40 AO+MD5 server: no sign client (misconfig, matching MD5): counter TCPMD5NotFound increased 1 => 2
> ok 41 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: connect() was prevented
> ok 42 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: no counter checks
> ok 43 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: connect() was prevented
> ok 44 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: no counter checks
> ok 45 TCP-AO established: add TCP-MD5 key: postfailed as expected
> ok 46 TCP-AO established: add TCP-MD5 key: counter TCPAOGood increased 12 => 14
> ok 47 TCP-MD5 established: add TCP-AO key: postfailed as expected
> ok 48 TCP-MD5 established: add TCP-AO key: no counter checks
> ok 49 non-signed established: add TCP-AO key: postfailed as expected
> ok 50 non-signed established: add TCP-AO key: counter CurrEstab increased 0 => 1
> ok 51 TCP-AO key intersects with existing TCP-MD5 key: prefailed as expected: Key was rejected by service
> ok 52 TCP-MD5 key intersects with existing TCP-AO key: prefailed as expected: Key was rejected by service
> ok 53 TCP-MD5 key + TCP-AO required: prefailed as expected: Key was rejected by service
> ok 54 TCP-AO required on socket + TCP-MD5 key: prefailed as expected: Key was rejected by service
> ok 55 VRF: TCP-AO key (no l3index) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 56 VRF: TCP-MD5 key (no l3index) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 57 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service
> ok 58 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 59 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service
> ok 60 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 61 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 62 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service
> ok 63 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service
> ok 64 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service
> ok 65 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=N)
> ok 66 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=0)
> ok 67 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 68 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service
> ok 69 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=0)
> ok 70 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=N)
> ok 71 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service
> ok 72 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service
> # Totals: pass:72 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Verify corner-cases for UAPI.
Sample output:
> # ./setsockopt-closed_ipv4
> 1..120
> # 1657[lib/setup.c:254] rand seed 1681938184
> TAP version 13
> ok 1 AO add: minimum size
> ok 2 AO add: extended size
> ok 3 AO add: null optval
> ok 4 AO del: minimum size
> ok 5 AO del: extended size
> ok 6 AO del: null optval
> ok 7 AO set info: minimum size
> ok 8 AO set info: extended size
> ok 9 AO info get: : extended size
> ok 10 AO set info: null optval
> ok 11 AO get info: minimum size
> ok 12 AO get info: extended size
> ok 13 AO get info: null optval
> ok 14 AO get info: null optlen
> ok 15 AO get keys: minimum size
> ok 16 AO get keys: extended size
> ok 17 AO get keys: null optval
> ok 18 AO get keys: null optlen
> ok 19 key add: too big keylen
> ok 20 key add: using reserved padding
> ok 21 key add: using reserved2 padding
> ok 22 key add: wrong address family
> ok 23 key add: port (unsupported)
> ok 24 key add: no prefix, addr
> ok 25 key add: no prefix, any addr
> ok 26 key add: prefix, any addr
> ok 27 key add: too big prefix
> ok 28 key add: too short prefix
> ok 29 key add: bad key flags
> ok 30 key add: add current key on a listen socket
> ok 31 key add: add rnext key on a listen socket
> ok 32 key add: add current+rnext key on a listen socket
> ok 33 key add: add key and set as current
> ok 34 key add: add key and set as rnext
> ok 35 key add: add key and set as current+rnext
> ok 36 key add: ifindex without TCP_AO_KEYF_IFNINDEX
> ok 37 key add: non-existent VRF
> ok 38 optmem limit was hit on adding 69 key
> ok 39 key add: maclen bigger than TCP hdr
> ok 40 key add: bad algo
> ok 41 key del: using reserved padding
> ok 42 key del: using reserved2 padding
> ok 43 key del: del and set current key on a listen socket
> ok 44 key del: del and set rnext key on a listen socket
> ok 45 key del: del and set current+rnext key on a listen socket
> ok 46 key del: bad key flags
> ok 47 key del: ifindex without TCP_AO_KEYF_IFNINDEX
> ok 48 key del: non-existent VRF
> ok 49 key del: set non-exising current key
> ok 50 key del: set non-existing rnext key
> ok 51 key del: set non-existing current+rnext key
> ok 52 key del: set current key
> ok 53 key del: set rnext key
> ok 54 key del: set current+rnext key
> ok 55 key del: set as current key to be removed
> ok 56 key del: set as rnext key to be removed
> ok 57 key del: set as current+rnext key to be removed
> ok 58 key del: async on non-listen
> ok 59 key del: non-existing sndid
> ok 60 key del: non-existing rcvid
> ok 61 key del: incorrect addr
> ok 62 key del: correct key delete
> ok 63 AO info set: set current key on a listen socket
> ok 64 AO info set: set rnext key on a listen socket
> ok 65 AO info set: set current+rnext key on a listen socket
> ok 66 AO info set: using reserved padding
> ok 67 AO info set: using reserved2 padding
> ok 68 AO info set: accept_icmps
> ok 69 AO info get: accept_icmps
> ok 70 AO info set: ao required
> ok 71 AO info get: ao required
> ok 72 AO info set: ao required with MD5 key
> ok 73 AO info set: set non-existing current key
> ok 74 AO info set: set non-existing rnext key
> ok 75 AO info set: set non-existing current+rnext key
> ok 76 AO info set: set current key
> ok 77 AO info get: set current key
> ok 78 AO info set: set rnext key
> ok 79 AO info get: set rnext key
> ok 80 AO info set: set current+rnext key
> ok 81 AO info get: set current+rnext key
> ok 82 AO info set: set counters
> ok 83 AO info get: set counters
> ok 84 AO info set: no-op
> ok 85 AO info get: no-op
> ok 86 get keys: no ao_info
> ok 87 get keys: proper tcp_ao_get_mkts()
> ok 88 get keys: set out-only pkt_good counter
> ok 89 get keys: set out-only pkt_bad counter
> ok 90 get keys: bad keyflags
> ok 91 get keys: ifindex without TCP_AO_KEYF_IFNINDEX
> ok 92 get keys: using reserved field
> ok 93 get keys: no prefix, addr
> ok 94 get keys: no prefix, any addr
> ok 95 get keys: prefix, any addr
> ok 96 get keys: too big prefix
> ok 97 get keys: too short prefix
> ok 98 get keys: prefix + addr
> ok 99 get keys: get_all + prefix
> ok 100 get keys: get_all + addr
> ok 101 get keys: get_all + sndid
> ok 102 get keys: get_all + rcvid
> ok 103 get keys: current + prefix
> ok 104 get keys: current + addr
> ok 105 get keys: current + sndid
> ok 106 get keys: current + rcvid
> ok 107 get keys: rnext + prefix
> ok 108 get keys: rnext + addr
> ok 109 get keys: rnext + sndid
> ok 110 get keys: rnext + rcvid
> ok 111 get keys: get_all + current
> ok 112 get keys: get_all + rnext
> ok 113 get keys: current + rnext
> ok 114 key add: duplicate: full copy
> ok 115 key add: duplicate: any addr key on the socket
> ok 116 key add: duplicate: add any addr key
> ok 117 key add: duplicate: add any addr for the same subnet
> ok 118 key add: duplicate: full copy of a key
> ok 119 key add: duplicate: RecvID differs
> ok 120 key add: duplicate: SendID differs
> # Totals: pass:120 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide functions to create selftests dedicated to TCP-AO.
They can run in parallel, as they use temporary net namespaces.
They can be very specific to the feature being tested.
This will allow to create a lot of TCP-AO tests, without complicating
one binary with many --options and to create scenarios, that are
hard to put in bash script that uses one binary.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trying to probe update_sd_lb_stats() using perf results in the below
message in the kernel log:
trace_kprobe: Could not probe notrace function _text
This is because 'perf probe' specifies the kprobe location as an offset
from '_text':
$ sudo perf probe -D update_sd_lb_stats
p:probe/update_sd_lb_stats _text+1830728
However, the error message is misleading and doesn't help convey the
actual notrace function that is being probed. Fix this by looking up the
actual function name that is being probed. With this fix, we now get the
below message in the kernel log:
trace_kprobe: Could not probe notrace function update_sd_lb_stats.constprop.0
Link: https://lore.kernel.org/all/20231214051702.1687300-1-naveen@kernel.org/
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Enable the USB-C related functionality for the USB-C port on this board.
This includes OTG, PowerDelivery and DP AltMode. Also enable the
DisplayPort itself.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231215174152.315403-8-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Expand first USB host controller device node with the OF ports required
to support USB-C / DisplayPort switching.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231215174152.315403-7-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>