Commit graph

1,294,499 commits

Author SHA1 Message Date
Bartosz Golaszewski
71a73864e1 arm64: dts: qcom: qrb5165-rb5: add the Bluetooth node
Add the Bluetooth node for RB5 as well as its dependencies in the form
of the uart6 -> serial1 alias and the pin function for the Bluetooth
enable GPIO.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231207090706.19134-1-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:21:07 -06:00
Atul Dhudase
eed6e57e9f soc: qcom: llcc: Fix dis_cap_alloc and retain_on_pc configuration
Commit c14e64b469 ("soc: qcom: llcc: Support chipsets that can
 write to llcc") add the support for chipset where capacity based
allocation and retention through power collapse can be programmed
based on content of SCT table mentioned in the llcc driver where
the target like sdm845 where the entire programming related to it
is controlled in firmware. However, the commit introduces a bug
where capacity/retention register get overwritten each time it
gets programmed for each slice and that results in misconfiguration
of the register based on SCT table and that is not expected
behaviour instead it should be read modify write to retain the
configuration of other slices.

This issue is totally caught from code review and programming test
and not through any power/perf numbers so, it is not known what
impact this could make if we don't have this change however,
this feature are for these targets and they should have been
programmed accordingly as per their configuration mentioned in
SCT table like others bits information.

This change brings one difference where it keeps capacity/retention
bits of the slices that are not mentioned in SCT table in unknown
state where as earlier it was initialized to zero.

Fixes: c14e64b469 ("soc: qcom: llcc: Support chipsets that can write to llcc")
Signed-off-by: Atul Dhudase <quic_adhudase@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1701876771-10695-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:20:08 -06:00
Bhaumik Bhatt
b89b6a863d bus: mhi: host: Add spinlock to protect WP access when queueing TREs
Protect WP accesses such that multiple threads queueing buffers for
incoming data do not race.

Meanwhile, if CONFIG_TRACE_IRQFLAGS is enabled, irq will be enabled once
__local_bh_enable_ip is called as part of write_unlock_bh. Hence, let's
take irqsave lock after TRE is generated to avoid running write_unlock_bh
when irqsave lock is held.

Cc: stable@vger.kernel.org
Fixes: 189ff97cca ("bus: mhi: core: Add support for data transfer")
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1702276972-41296-2-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-12-16 10:50:08 +05:30
Manivannan Sadhasivam
809ec4c5a5 arm64: dts: qcom: sa8775p: Add missing space between node name and braces
Add missing space between node name and braces to match the style.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231206135540.17068-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:19:35 -06:00
Manivannan Sadhasivam
052c9a1f14 arm64: dts: qcom: Use "pcie" as the node name instead of "pci"
Qcom SoCs doesn't support the legacy PCI, but only PCIe. So use the correct
node name for the controller instances.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231206135540.17068-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:19:35 -06:00
Manivannan Sadhasivam
07299ba2e7 ARM: dts: qcom: Use "pcie" as the node name instead of "pci"
Qcom SoCs doesn't support the legacy PCI, but only PCIe. So use the correct
node name for the controller instances.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231206135540.17068-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:19:01 -06:00
Andrew Halaney
fbfd1f55ad soc: qcom: pmic_pdcharger_ulog: Fix hypothetical ulog request message endianess
Sparse reports the following:

    % ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make C=2 W=1 drivers/soc/qcom/pmic_pdcharger_ulog.o
    ...
      CC      drivers/soc/qcom/pmic_pdcharger_ulog.o
      CHECK   drivers/soc/qcom/pmic_pdcharger_ulog.c
    drivers/soc/qcom/pmic_pdcharger_ulog.c:57:34: warning: incorrect type in initializer (different base types)
    drivers/soc/qcom/pmic_pdcharger_ulog.c:57:34:    expected restricted __le32 [usertype] owner
    drivers/soc/qcom/pmic_pdcharger_ulog.c:57:34:    got int
    drivers/soc/qcom/pmic_pdcharger_ulog.c:58:33: warning: incorrect type in initializer (different base types)
    drivers/soc/qcom/pmic_pdcharger_ulog.c:58:33:    expected restricted __le32 [usertype] type
    drivers/soc/qcom/pmic_pdcharger_ulog.c:58:33:    got int
    drivers/soc/qcom/pmic_pdcharger_ulog.c:59:35: warning: incorrect type in initializer (different base types)
    drivers/soc/qcom/pmic_pdcharger_ulog.c:59:35:    expected restricted __le32 [usertype] opcode
    drivers/soc/qcom/pmic_pdcharger_ulog.c:59:35:    got int

Let's deal with endianness conversion in the rare case this ever runs
on a big-endian machine (and to quiet down sparse for this file).

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312060355.M0eJtq4X-lkp@intel.com/
Fixes: 086fdb48bc ("soc: qcom: add ADSP PDCharger ULOG driver")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231205-pmicpdcharger-ulog-fixups-v1-3-71c95162cb84@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:17:27 -06:00
Andrew Halaney
a74ebfcd60 soc: qcom: pmic_pdcharger_ulog: Move TRACE_SYSTEM out of #if protection
As specified in samples/trace_events/trace-events-sample.h:

    * Notice that TRACE_SYSTEM should be defined outside of #if
    * protection, just like TRACE_INCLUDE_FILE.

Fixes: 086fdb48bc ("soc: qcom: add ADSP PDCharger ULOG driver")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231205-pmicpdcharger-ulog-fixups-v1-2-71c95162cb84@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:17:27 -06:00
Andrew Halaney
4d2b810f44 soc: qcom: pmic_pdcharger_ulog: Search current directory for headers
As specified in samples/trace_events/Makefile:

    If you include a trace header outside of include/trace/events
    then the file that does the #define CREATE_TRACE_POINTS must
    have that tracer file in its main search path. This is because
    define_trace.h will include it, and must be able to find it from
    the include/trace directory.

Without this the following compilation error is seen:

      CC      drivers/soc/qcom/pmic_pdcharger_ulog.o
    In file included from drivers/soc/qcom/pmic_pdcharger_ulog.h:36,
                     from drivers/soc/qcom/pmic_pdcharger_ulog.c:15:
    ./include/trace/define_trace.h:95:42: fatal error: ./pmic_pdcharger_ulog.h: No such file or directory
       95 | #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
          |                                          ^
    compilation terminated.

Fixes: 086fdb48bc ("soc: qcom: add ADSP PDCharger ULOG driver")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231205-pmicpdcharger-ulog-fixups-v1-1-71c95162cb84@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:17:27 -06:00
Nikita Travkin
4555798a21 arm64: dts: qcom: acer-aspire1: Add sound
This laptop has two i2s speakers; an i2s audio codec for the headset
jack; two DMIC microphones in the lid and the displayport audio channel.

This commit adds the audio node that describes all of the above with the
exception of the DMICs that require in-SoC digital codec to be brought
up, which will be done later.

Note that the displayport channel is connected here for completeness,
but the displayport can't be used yet since the HPD signal is created by
the embedded controller, which will be added later.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20231205-aspire1-sound-v2-3-443b7ac0a06f@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:16:07 -06:00
Nikita Travkin
feec9f0add arm64: dts: qcom: acer-aspire1: Correct audio codec definition
When initially added, a mistake was made in the definition of the codec.

Despite the fact that the DMIC line is connected on the side of the
codec chip, and relevant passive components, including 0-ohm resistors
connecting the dmics, are present, the dmic line is still cut in
another place on the board, which was overlooked.

Correct this by replacing the dmic configuration with a comment
describing this hardware detail.

While at it, also add missing regulators definitions. This is not a
functional change as all the relevant regulators were already added via
the other rail supplies.

Fixes: 4a9f8f8f2a ("arm64: dts: qcom: Add Acer Aspire 1")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20231205-aspire1-sound-v2-2-443b7ac0a06f@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:16:07 -06:00
Nikita Travkin
04fe8f0a68 arm64: dts: qcom: acer-aspire1: Enable RTC
pm6150 has a read-only RTC that can be used to keep the time with some
extra userspace tools. Enable it.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20231205-aspire1-sound-v2-1-443b7ac0a06f@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:16:07 -06:00
Naman Jain
cea0585caf soc: qcom: socinfo: Add few DSPs to get their image details
Add support to get image details from SMEM for DSPs like
DSPS (Sensors DSP), CDSP (Compute DSP), GPDSP (General purpose DSP)
while also supporting this for more than one DSP of certain types.

Signed-off-by: Naman Jain <quic_namajain@quicinc.com>
Link: https://lore.kernel.org/r/20231205101018.6079-1-quic_namajain@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:14:19 -06:00
Abel Vesa
fd4b634f9b soc: qcom: llcc: Add missing description for members in slice config
Fix all warnings thrown due to missing description for some of the
members in llcc_slice_config.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312050519.mup4Q8mD-lkp@intel.com/
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231205-llcc-fix-slice-config-warnings-v1-1-d6331d601dd3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:14:05 -06:00
Dmitry Baryshkov
75390b69d5 arm64: dts: qcom: sm8450: switch UFS QMP PHY to new style of bindings
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231205032552.1583336-10-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:13:11 -06:00
Dmitry Baryshkov
002a13ed10 arm64: dts: qcom: sm8350: switch UFS QMP PHY to new style of bindings
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231205032552.1583336-9-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:13:11 -06:00
Dmitry Baryshkov
ba865bdcc6 arm64: dts: qcom: sm8250: switch UFS QMP PHY to new style of bindings
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231205032552.1583336-8-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:13:11 -06:00
Dmitry Baryshkov
935c76f7f8 arm64: dts: qcom: sm8150: switch UFS QMP PHY to new style of bindings
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231205032552.1583336-7-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:13:11 -06:00
Dmitry Baryshkov
8e89beb32e arm64: dts: qcom: sm6350: switch UFS QMP PHY to new style of bindings
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231205032552.1583336-6-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:13:11 -06:00
Dmitry Baryshkov
f6874706e3 arm64: dts: qcom: sm6115: switch UFS QMP PHY to new style of bindings
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231205032552.1583336-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:13:11 -06:00
Dmitry Baryshkov
760baba5e7 arm64: dts: qcom: sdm845: switch UFS QMP PHY to new style of bindings
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231205032552.1583336-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:13:11 -06:00
Dmitry Baryshkov
963ff488af arm64: dts: qcom: msm8998: switch UFS QMP PHY to new style of bindings
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231205032552.1583336-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:13:11 -06:00
Dmitry Baryshkov
f63ba6aa80 arm64: dts: qcom: msm8996: switch UFS QMP PHY to new style of bindings
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231205032552.1583336-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:13:11 -06:00
Konrad Dybcio
0f6f5a2205 arm64: dts: qcom: sm8450-hdk: Enable the A730 GPU
Enable the GPU and provide a path for the ZAP blob.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231127-topic-a7xx_dt-v2-6-2a437588e563@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:09:11 -06:00
Konrad Dybcio
e877f075a5 arm64: dts: qcom: sm8550-mtp: Enable the A740 GPU
Enable the GPU and provide a path for the ZAP blob.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231127-topic-a7xx_dt-v2-5-2a437588e563@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:09:11 -06:00
Konrad Dybcio
c9f785d7d5 arm64: dts: qcom: sm8550-qrd: Enable the A740 GPU
Enable the GPU and provide a path for the ZAP blob.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20231127-topic-a7xx_dt-v2-4-2a437588e563@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:09:11 -06:00
Konrad Dybcio
ef19923ae1 arm64: dts: qcom: sm8550: Add GPU nodes
Add the required nodes to support the A740 GPU.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20231127-topic-a7xx_dt-v2-3-2a437588e563@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:09:11 -06:00
Konrad Dybcio
9810647a04 arm64: dts: qcom: sm8450: Add GPU nodes
Add the required nodes to support the A730 GPU.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231127-topic-a7xx_dt-v2-2-2a437588e563@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:07:02 -06:00
Stephan Gerhold
4bbda9421f arm64: dts: qcom: msm8939: Make blsp_dma controlled-remotely
The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.

In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 [1] so adding "qcom,controlled-remotely"
upstream matches the behavior of the downstream/vendor kernel.

Adding this seems to fix some weird issues with UART where both
input/output becomes garbled with certain obscure firmware versions on
some devices.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L866-872

Cc: stable@vger.kernel.org # 6.5
Fixes: 61550c6c15 ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8916-blsp-dma-remote-v1-2-3e49c8838c8d@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:06:16 -06:00
Stephan Gerhold
7c45b6ddbc arm64: dts: qcom: msm8916: Make blsp_dma controlled-remotely
The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.

In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 [1] so adding "qcom,controlled-remotely"
upstream matches the behavior of the downstream/vendor kernel.

Adding this seems to fix some weird issues with UART where both
input/output becomes garbled with certain obscure firmware versions on
some devices.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8916.dtsi#L1466-1472

Cc: stable@vger.kernel.org # 6.5
Fixes: a0e5fb1031 ("arm64: dts: qcom: Add msm8916 BLSP device nodes")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8916-blsp-dma-remote-v1-1-3e49c8838c8d@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:06:16 -06:00
Stephan Gerhold
12844ac08c arm64: dts: qcom: msm8939: Add clock-frequency for broadcast timer
Looks like not all firmware versions used for MSM8939 program the timer
frequency for both broadcast/MMIO timers, causing a WARNING at runtime:

WARNING: CPU: 0 PID: 0 at kernel/time/clockevents.c:38 cev_delta2ns+0x74/0x90
pc : cev_delta2ns+0x74/0x90
lr : clockevents_config.part.0+0x64/0x8c
Call trace:
 cev_delta2ns+0x74/0x90
 clockevents_config_and_register+0x20/0x34
 arch_timer_mem_of_init+0x374/0x534
 timer_probe+0x88/0x110
 time_init+0x14/0x4c
 start_kernel+0x2c0/0x640

Unfortunately there is no way to fix the firmware on most of these
devices since it's proprietary and signed. As a workaround, specify the
clock-frequency explicitly in the DT to fix the warning.

Fixes: 61550c6c15 ("arm64: dts: qcom: Add msm8939 SoC")
Reported-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8939-timer-v1-1-a2486c625786@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:05:36 -06:00
Stephan Gerhold
cc1ec484f2 arm64: dts: qcom: Add missing vio-supply for AW2013
Add the missing vio-supply to all usages of the AW2013 LED controller
to ensure that the regulator needed for pull-up of the interrupt and
I2C lines is really turned on. While this seems to have worked fine so
far some of these regulators are not guaranteed to be always-on. For
example, pm8916_l6 is typically turned off together with the display
if there aren't any other devices (e.g. sensors) keeping it always-on.

Cc: stable@vger.kernel.org # 6.6
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20231204-qcom-aw2013-vio-v1-1-5d264bb5c0b2@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:05:16 -06:00
Chukun Pan
2e16f9dc9b arm64: dts: qcom: ipq6018: Add QUP5 SPI node
Add node to support the QUP5 SPI controller inside of IPQ6018.
Some routers use this bus to connect SPI TPM chips.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20231203154003.532765-1-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:04:04 -06:00
Chukun Pan
e6c32770ef arm64: dts: qcom: ipq6018: Add remaining QUP UART node
Add node to support all the QUP UART node controller inside of IPQ6018.
Some routers use these bus to connect Bluetooth chips.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20231203153914.532654-1-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:04:01 -06:00
Satya Priya Kakitapalli
f6bda45310 clk: qcom: videocc-sm8150: Add runtime PM support
Add runtime PM support to ensure the supply rails are enabled
when necessary.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-4-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:00:50 -06:00
Satya Priya Kakitapalli
71f130c919 clk: qcom: videocc-sm8150: Add missing PLL config property
When the driver was ported upstream, PLL test_ctl_hi1 register value
was omitted. Add it to ensure the PLLs are fully configured.

Fixes: 5658e8cf1a ("clk: qcom: add video clock controller driver for SM8150")
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-3-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:00:50 -06:00
Satya Priya Kakitapalli
1fd9a939db clk: qcom: videocc-sm8150: Update the videocc resets
Add all the available resets for the video clock controller
on sm8150.

Fixes: 5658e8cf1a ("clk: qcom: add video clock controller driver for SM8150")
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-2-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 23:00:50 -06:00
Bjorn Andersson
d00e87f0e2 Merge branch '20231201-videocc-8150-v3-1-56bec3a5e443@quicinc.com' into clk-for-6.8
Merge SM8150 Video clock controller through a topic branch, to allow
constants to be made available in the DeviceTree branch as well.
2023-12-15 22:59:48 -06:00
Satya Priya Kakitapalli
3185f96968 dt-bindings: clock: Update the videocc resets for sm8150
Add all the available resets for the video clock controller
on sm8150.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-1-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 22:59:38 -06:00
Tengfei Fan
cdd97e07e5 arm64: defconfig: enable clock controller and pinctrl
Enable global clock controller and pinctrl for support the Qualcomm
SM4450 platform to boot to UART console.

The serial engine depends on some global clock controller and pinctrl, but
as the serial console driver is only available as built-in, so the global
clock controller and pinctrl also needs be built-in for the UART device to
probe and register the console.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231129103325.24854-7-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 22:58:01 -06:00
Konrad Dybcio
ff753723bf arm64: dts: qcom: qrb4210-rb2: Enable MPSS and Wi-Fi
Enable the remote processors and tighten up the regulators to enable
Wi-Fi functionality on the RB2.

For reference, the hw/sw identifies as:

qmi chip_id 0x150 chip_family 0x4002 board_id 0xff soc_id 0x40670000
qmi fw_version 0x337302d3 fw_build_timestamp 2023-01-06 01:50
fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.3.7.c2-00723-QCAHLSWMTPLZ-1
wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
firmware ver  api 5 features wowlan,mgmt-tx-by-reference,non-bmi
crc32 b3d4b790
htt-ver 3.114 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231104-topic-rb2_wifi-v1-1-fd45ae535d2f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 22:56:07 -06:00
Konrad Dybcio
a7dc634351 Revert "soc: qcom: stats: Add DDR sleep stats"
After recent reports ([1], [2]) of older platforms (particularly 8150 and
7180) breaking after DDR sleep stats introduction, revert the following:

Commit 73380e2573 ("soc: qcom: stats: fix 64-bit division")
Commit e84e61bdb9 ("soc: qcom: stats: Add DDR sleep stats")

The feature itself is rather useful for debugging DRAM power management,
however it looks like the shared RPMh stats data structures differ on
previous SoCs.

Revert its addition for now to un-break booting on these earlier SoCs,
while I try to come up with a better way to enable it conditionally.

[1] https://lore.kernel.org/linux-arm-msm/20231209215601.3543895-2-dmitry.baryshkov@linaro.org/
[2] https://lore.kernel.org/linux-arm-msm/CAD=FV=XX4wLg1NNVL15RK4D4tLvuSzZyUv=k_tS4bSb3=7QJzQ@mail.gmail.com/

Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20231214-topic-undo_ddr_stats-v1-1-1fe32c258e56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-15 22:22:36 -06:00
Linus Torvalds
c8e97fc6b4 arm64 fixes:
- Arm CMN perf: fix the DTC allocation failure path which can end up
   erroneously clearing live counters
 
 - arm64/mm: fix hugetlb handling of the dirty page state leading to a
   continuous fault loop in user on hardware without dirty bit management
   (DBM). That's caused by the dirty+writeable information not being
   properly preserved across a series of mprotect(PROT_NONE),
   mprotect(PROT_READ|PROT_WRITE)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmV85TIACgkQa9axLQDI
 XvFx/A/+P0PPVvIWr1VEggXeGhalhrXnn5H3TKm3F7Vz8+VH4X/z5gTdAj1FtwTu
 MIyjGFl3dQWEq5g4qscBNPqy045AGpRBJKmOw1V6mANuyRcg+06d9qCsosb7/pcs
 sMLsS34cmWPIQemd3AAyV20DeQPkYQEVEPdZ4QM0cvhCNCYspWmuqc8lEqldl25G
 5AnwFPrWza5a/4bKZgVOlyXrZtUxX3uwN1/7IbMrJ6ncpsRn1QMjqRfSlrYlTbcw
 O0IAnLFqtXqvO7nVaBw5Jq2EYrj0oOC25Pg8fCmaLsFM2yMky4186slULHg3c63Z
 zGyMPOLWdFGa/Vj6yliB8xPrrJGgTfRbFk9LYa4BvJcU3nXxcMI/LXJzM7TZYMFr
 j1vkH4cLyf76r12xzT/UYooE+A8gMJNuns+G0RqGuPYZ7fA2ut77H1IpDxBiCCEM
 tB2ys8lV/GtkGqNseGNX75hNPgsykPsCi7HTnXjMFK84iP/6CFUE2V0haOV1cUDw
 8r1nGe5wVJ/Yc/6/62mzCQjEluhdAn0gK1b/QQyOt0QN6maPXjIF4CILbuLwdRQh
 RDYNeRK+dlqLGmBwxM99zVrb3NnPH6oTm0Vq3VK+9mTQeGXNzmWfFQk8odTKiIEA
 oksWFX91exOXhcrqkB1GCRaLjrQWeuA2eq5RrPpmDmUsPyhoeCM=
 =wq2L
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

 - Arm CMN perf: fix the DTC allocation failure path which can end up
   erroneously clearing live counters

 - arm64/mm: fix hugetlb handling of the dirty page state leading to a
   continuous fault loop in user on hardware without dirty bit
   management (DBM). That's caused by the dirty+writeable information
   not being properly preserved across a series of mprotect(PROT_NONE),
   mprotect(PROT_READ|PROT_WRITE)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modify
  perf/arm-cmn: Fail DTC counter allocation correctly
2023-12-15 19:59:03 -08:00
Linus Torvalds
2e3f280b24 pci-v6.7-fixes-1
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmV8vZwUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwQARAApzU4pesi9dkl/Fyv11IwayNm+gra
 8dTsdT6dcnTq8DKXdTRtuyMwY+H57YC/Cxl0/Y6KPnJqUmgXEiOfe1duPvy5HJB2
 YQGPszDC/yrbU/s65cWwuw+wLHk3PeoR/RNfo0PBNRb+FIoE2tV6mgAw0CR2xyhV
 MTDMMvdJBAQoNytmkw5ZYgdr3zUPgb80VgjBa453xGxMHlnpqhRIKNw5jXBOWCpY
 1TkrDAtKzziCXVx9oqLDA46AgdVo48w+vPrC3wa/8kxv4/N0BplhiUrtAdXMrsIH
 wR3uX3ypfdjEWf+iX3dgGbvwoSZirlZdu9BaSTZqM/WAHdync/Hit/mF6rYpOQfJ
 9WpALQkx11EvYpltZOO4JahaWueGxEK73/P43Cb9Pgj5zNiMagGwVc+1iEXMC0k8
 MML/MZrQQaNcJOQL+V3rXr7pcRqV8X6H5/0K/e8M53D5U3ZkcjBc2QcqOd3/4ugf
 7sa9JfXOFcBJvwUt3HQNHEyj+leJDJ09kRXSx8szfRrCGVTkNtZ9DxKePHzCk+kC
 kU4y+5E9iIsGwdGknnO53LbilgGtutJx+JpBPz0guXb53RIGQGcHfWVPHzB9fmJk
 Ty4d+zsP2OmKgMDX2FdVv4xVNYDsdOGG7PQu++pm0fBmIvBixRcQyfXrLdTMvjwX
 6AOhXOppox58COs=
 =4BWR
 -----END PGP SIGNATURE-----

Merge tag 'pci-v6.7-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci fixes from Bjorn Helgaas:

 - Limit Max_Read_Request_Size (MRRS) on some MIPS Loongson systems
   because they don't all support MRRS > 256, and firmware doesn't
   always initialize it correctly, which meant some PCIe devices didn't
   work (Jiaxun Yang)

 - Add and use pci_enable_link_state_locked() to prevent potential
   deadlocks in vmd and qcom drivers (Johan Hovold)

 - Revert recent (v6.5) acpiphp resource assignment changes that fixed
   issues with hot-adding devices on a root bus or with large BARs, but
   introduced new issues with GPU initialization and hot-adding SCSI
   disks in QEMU VMs and (Bjorn Helgaas)

* tag 'pci-v6.7-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  Revert "PCI: acpiphp: Reassign resources on bridge if necessary"
  PCI/ASPM: Add pci_disable_link_state_locked() lockdep assert
  PCI/ASPM: Clean up __pci_disable_link_state() 'sem' parameter
  PCI: qcom: Clean up ASPM comment
  PCI: qcom: Fix potential deadlock when enabling ASPM
  PCI: vmd: Fix potential deadlock when enabling ASPM
  PCI/ASPM: Add pci_enable_link_state_locked()
  PCI: loongson: Limit MRRS to 256
2023-12-15 19:48:47 -08:00
Chandan Babu R
98bdbf60cc xfs: online repair of quota and rt metadata files [v28.3]
XFS stores quota records and free space bitmap information in files.
 Add the necessary infrastructure to enable repairing metadata inodes and
 their forks, and then make it so that we can repair the file metadata
 for the rtbitmap.  Repairing the bitmap contents (and the summary file)
 is left for subsequent patchsets.
 
 We also add the ability to repair file metadata the quota files.  As
 part of these repairs, we also reinitialize the ondisk dquot records as
 necessary to get the incore dquots working.  We can also correct
 obviously bad dquot record attributes, but we leave checking the
 resource usage counts for the next patchsets.
 
 This has been running on the djcloud for months with no problems.  Enjoy!
 
 Signed-off-by: Darrick J. Wong <djwong@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXzKBAAKCRBKO3ySh0YR
 pq7JAPwM5CRyw09Ys4iy1QO3iX6y4awKVONO/qIWKzGi56RRggEAoDYNXtx8Kvd8
 gQS/PdrDBdQrwdu5W2stUyPt6xPxqwM=
 =DNHN
 -----END PGP SIGNATURE-----

Merge tag 'repair-quota-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeB

xfs: online repair of quota and rt metadata files

XFS stores quota records and free space bitmap information in files.
Add the necessary infrastructure to enable repairing metadata inodes and
their forks, and then make it so that we can repair the file metadata
for the rtbitmap.  Repairing the bitmap contents (and the summary file)
is left for subsequent patchsets.

We also add the ability to repair file metadata the quota files.  As
part of these repairs, we also reinitialize the ondisk dquot records as
necessary to get the incore dquots working.  We can also correct
obviously bad dquot record attributes, but we leave checking the
resource usage counts for the next patchsets.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>

* tag 'repair-quota-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
  xfs: repair quotas
  xfs: improve dquot iteration for scrub
  xfs: check dquot resource timers
  xfs: check the ondisk space mapping behind a dquot
2023-12-16 08:53:55 +05:30
Chandan Babu R
5bb4ad95c1 xfs: online repair of rt bitmap file [v28.3]
Add in the necessary infrastructure to check the inode and data forks of
 metadata files, then apply that to the realtime bitmap file.  We won't
 be able to reconstruct the contents of the rtbitmap file until rmapbt is
 added for realtime volumes, but we can at least get the basics started.
 
 This has been running on the djcloud for months with no problems.  Enjoy!
 
 Signed-off-by: Darrick J. Wong <djwong@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXzKAwAKCRBKO3ySh0YR
 pilcAP9Zuwcc01Wsll9bWHEOLVPmZbGkatLQfq3kx1f0AjIJ2gEArPaKRfNNwLdY
 lxCgSdJbCFBKW1oQR+k+W07Om7d3Zww=
 =B5sk
 -----END PGP SIGNATURE-----

Merge tag 'repair-rtbitmap-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeB

xfs: online repair of rt bitmap file

Add in the necessary infrastructure to check the inode and data forks of
metadata files, then apply that to the realtime bitmap file.  We won't
be able to reconstruct the contents of the rtbitmap file until rmapbt is
added for realtime volumes, but we can at least get the basics started.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>

* tag 'repair-rtbitmap-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
  xfs: online repair of realtime bitmaps
  xfs: create a new inode fork block unmap helper
  xfs: repair the inode core and forks of a metadata inode
  xfs: always check the rtbitmap and rtsummary files
  xfs: check rt summary file geometry more thoroughly
  xfs: check rt bitmap file geometry more thoroughly
2023-12-16 08:50:01 +05:30
Chandan Babu R
98e63b91cd xfs: online repair of file fork mappings [v28.3]
In this series, online repair gains the ability to rebuild data and attr
 fork mappings from the reverse mapping information.  It is at this point
 where we reintroduce the ability to reap file extents.
 
 Repair of CoW forks is a little different -- on disk, CoW staging
 extents are owned by the refcount btree and cannot be mapped back to
 individual files.  Hence we can only detect staging extents that don't
 quite look right (missing reverse mappings, shared staging extents) and
 replace them with fresh allocations.
 
 This has been running on the djcloud for months with no problems.  Enjoy!
 
 Signed-off-by: Darrick J. Wong <djwong@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXzKAwAKCRBKO3ySh0YR
 prEyAP95FTXnn0pe08gcyzICmcnMM762VNleDRawhAj+LU2J4AEAj4eOC5AelmYo
 MHwdRYJzug539fliCF8m6a+id+aeCQo=
 =cONL
 -----END PGP SIGNATURE-----

Merge tag 'repair-file-mappings-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeB

xfs: online repair of file fork mappings

In this series, online repair gains the ability to rebuild data and attr
fork mappings from the reverse mapping information.  It is at this point
where we reintroduce the ability to reap file extents.

Repair of CoW forks is a little different -- on disk, CoW staging
extents are owned by the refcount btree and cannot be mapped back to
individual files.  Hence we can only detect staging extents that don't
quite look right (missing reverse mappings, shared staging extents) and
replace them with fresh allocations.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>

* tag 'repair-file-mappings-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
  xfs: repair problems in CoW forks
  xfs: create a ranged query function for refcount btrees
  xfs: refactor repair forcing tests into a repair.c helper
  xfs: repair inode fork block mapping data structures
  xfs: reintroduce reaping of file metadata blocks to xrep_reap_extents
2023-12-16 08:44:55 +05:30
Chandan Babu R
7b63ce86f9 xfs: online repair of inodes and forks [v28.3]
In this series, online repair gains the ability to repair inode records.
 To do this, we must repair the ondisk inode and fork information enough
 to pass the iget verifiers and hence make the inode igettable again.
 Once that's done, we can perform higher level repairs on the incore
 inode.  The fstests counterpart of this patchset implements stress
 testing of repair.
 
 This has been running on the djcloud for months with no problems.  Enjoy!
 
 Signed-off-by: Darrick J. Wong <djwong@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXzKAwAKCRBKO3ySh0YR
 ppnbAP9zh9hc4Lr+3EMMZMsFXNxScP8iV7kCmHoorgMhHI9z8AEApBxkILxLjbwC
 TJtoSmbnBhQWXR/my0MBPpLgD7v3ugk=
 =lwKw
 -----END PGP SIGNATURE-----

Merge tag 'repair-inodes-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeB

xfs: online repair of inodes and forks

In this series, online repair gains the ability to repair inode records.
To do this, we must repair the ondisk inode and fork information enough
to pass the iget verifiers and hence make the inode igettable again.
Once that's done, we can perform higher level repairs on the incore
inode.  The fstests counterpart of this patchset implements stress
testing of repair.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>

* tag 'repair-inodes-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
  xfs: skip the rmapbt search on an empty attr fork unless we know it was zapped
  xfs: abort directory parent scrub scans if we encounter a zapped directory
  xfs: zap broken inode forks
  xfs: repair inode records
  xfs: set inode sick state flags when we zap either ondisk fork
  xfs: dont cast to char * for XFS_DFORK_*PTR macros
  xfs: add missing nrext64 inode flag check to scrub
  xfs: try to attach dquots to files before repairing them
  xfs: disable online repair quota helpers when quota not enabled
2023-12-16 08:37:00 +05:30
Chandan Babu R
6e1d7b8941 xfs: online repair of AG btrees [v28.3]
Now that we've spent a lot of time reworking common code in online fsck,
 we're ready to start rebuilding the AG space btrees.  This series
 implements repair functions for the free space, inode, and refcount
 btrees.  Rebuilding the reverse mapping btree is much more intense and
 is left for a subsequent patchset.  The fstests counterpart of this
 patchset implements stress testing of repair.
 
 This has been running on the djcloud for months with no problems.  Enjoy!
 
 Signed-off-by: Darrick J. Wong <djwong@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXzKAwAKCRBKO3ySh0YR
 pkAeAQCM8fCc4T777ZOSE+RchXESmXeIKX3fAtgqTFa5dumauAEA1CSgTHnCASmL
 9K5zdFwRyH2jFeFrxCMAqwNn+X2Z0gg=
 =Cv+u
 -----END PGP SIGNATURE-----

Merge tag 'repair-ag-btrees-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeB

xfs: online repair of AG btrees

Now that we've spent a lot of time reworking common code in online fsck,
we're ready to start rebuilding the AG space btrees.  This series
implements repair functions for the free space, inode, and refcount
btrees.  Rebuilding the reverse mapping btree is much more intense and
is left for a subsequent patchset.  The fstests counterpart of this
patchset implements stress testing of repair.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>

* tag 'repair-ag-btrees-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
  xfs: repair refcount btrees
  xfs: repair inode btrees
  xfs: repair free space btrees
  xfs: remove trivial bnobt/inobt scrub helpers
  xfs: roll the scrub transaction after completing a repair
  xfs: move the per-AG datatype bitmaps to separate files
  xfs: create separate structures and code for u32 bitmaps
2023-12-16 08:32:05 +05:30
Chandan Babu R
5e60ca3fad xfs: prepare repair for bulk loading [v28.3]
Before we start merging the online repair functions, let's improve the
 bulk loading code a bit.  First, we need to fix a misinteraction between
 the AIL and the btree bulkloader wherein the delwri at the end of the
 bulk load fails to queue a buffer for writeback if it happens to be on
 the AIL list.
 
 Second, we introduce a defer ops barrier object so that the process of
 reaping blocks after a repair cannot queue more than two extents per EFI
 log item.  This increases our exposure to leaking blocks if the system
 goes down during a reap, but also should prevent transaction overflows,
 which result in the system going down.
 
 Third, we change the bulkloader itself to copy multiple records into a
 block if possible, and add some debugging knobs so that developers can
 control the slack factors, just like they can do for xfs_repair.
 
 This has been running on the djcloud for months with no problems.  Enjoy!
 
 Signed-off-by: Darrick J. Wong <djwong@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXzKAwAKCRBKO3ySh0YR
 pkcvAP0SEt4VLGrWQJqlWZ5e4sWnqDqVPyT/CQMvG86Qm9VcYwEAzbE0/DaA7uN0
 DnceMdho49kTo6FC7+z/lQyGKbl89As=
 =8FAT
 -----END PGP SIGNATURE-----

Merge tag 'repair-prep-for-bulk-loading-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeB

xfs: prepare repair for bulk loading

Before we start merging the online repair functions, let's improve the
bulk loading code a bit.  First, we need to fix a misinteraction between
the AIL and the btree bulkloader wherein the delwri at the end of the
bulk load fails to queue a buffer for writeback if it happens to be on
the AIL list.

Second, we introduce a defer ops barrier object so that the process of
reaping blocks after a repair cannot queue more than two extents per EFI
log item.  This increases our exposure to leaking blocks if the system
goes down during a reap, but also should prevent transaction overflows,
which result in the system going down.

Third, we change the bulkloader itself to copy multiple records into a
block if possible, and add some debugging knobs so that developers can
control the slack factors, just like they can do for xfs_repair.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>

* tag 'repair-prep-for-bulk-loading-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
  xfs: constrain dirty buffers while formatting a staged btree
  xfs: move btree bulkload record initialization to ->get_record implementations
  xfs: add debug knobs to control btree bulk load slack factors
  xfs: read leaf blocks when computing keys for bulkloading into node blocks
  xfs: set XBF_DONE on newly formatted btree block that are ready for writing
  xfs: force all buffers to be written during btree bulk load
2023-12-16 08:27:42 +05:30