The SM8150-HDK uses two different regulators to power up SuperSpeed USB
PHYs. The L5A regulator is used for the second USB host, while the first
(OTG) USB host uses different regulator, L18A. Fix the regulator for the
usb_1 QMPPHY and (to remove possible confusion) drop the
usb_ss_dp_core_1/_2 labels.
Fixes: 0ab1b2d10a ("arm64: dts: qcom: add sm8150 hdk dts")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231215174152.315403-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add DSI outputs and link them to the onboard Lontium LT9611 DSI-to-HDMI
bridge, enabling HDMI output on this board. While adding the display
resources, also drop the headless ("amd,imageon") compat string from the
GPU node, since the board now has output.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231215174152.315403-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add required-opps property to the display clock controller. This makes
it cast minimal vote on the MMCX lane and prevents further 'clock stuck'
errors when enabling the display.
Fixes: 2ef3bb17c4 ("arm64: dts: qcom: sm8150: Add DISPCC node")
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231215174152.315403-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node for MPM and wire it up on consumers that use it. This also
fixes a very bad and sad assumption I made when initially porting this
SoC that the downstream MPM-TLMM mappings were 1-1. That apparently
changed some time ago, so with this patch the MPM consumers will actually
be hooked up to the correct interrupt lines.
Fixes: 59d34ca97f ("arm64: dts: qcom: Add initial device tree for SM6375")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231215-topic-mpm_dt-v1-1-c6636fc75ce3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the compatible for the MSM8926-based Motorola Moto G 4G
smartphone released in 2013.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20231214-peregrine-v2-1-a35102268442@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The LDOs 1, 4 and 10 from PM8550 share the same supply, the SMPS 4
from PM8550ve. This needs to be done through shared supply approach
otherwise the bindings check fails.
Fixes: bd50b1f5b6 ("arm64: dts: qcom: x1e80100: Add Compute Reference Device")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231214-x1e80100-dts-fix-pm8550-regulators-supplies-v1-1-6b5830dc337e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pompom has several sources for its panel. Let's switch it to the
generic edp-panel compatible string to account for this.
This fixes a problem where the panel wouldn't come up on some pompon
devices after commit fb3f43d50d ("drm/panel-edp: Avoid adding
multiple preferred modes"). Specifically, some models of pompom have a
1920x1080 panel which is _very_ different than the 1366x768 panel
specified in the dts. Before the recent panel-edp fix on Linux things
kinda/sorta worked because the panel-edp driver would include both the
hardcoded and probed mode, AKA:
* #0 1920x1080
60.00 1920 1944 1960 2000 1080 1083 1088 1111 133320
flags: nhsync, nvsync; type: preferred, driver
* #1 1366x768
60.00 1366 1406 1438 1500 768 773 778 900 81000
flags: nhsync, nvsync; type: preferred, driver
...and, at least on ChromeOS, the userspace was consistently picking
the first mode even though both were marked as "preferred". Now that
the Linux driver is fixed we only get the hardcoded mode. That means
we end up trying to drive a 1920x1080 panel at 1366x768 and it doesn't
work so well.
Let's switch over to the generic panel-edp.
Fixes: fb3f43d50d ("drm/panel-edp: Avoid adding multiple preferred modes")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213163501.1.I8c20f926d15c9ddc12e423e07df1e89db1105d93@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB SS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.
Fixes: 0c9dde0d20 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jack Pham <quic_jackp@quicinc.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: 54524b6987 ("arm64: dts: qcom: sm8150: fix USB wakeup interrupt types")
Fixes: 0c9dde0d20 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jack Pham <quic_jackp@quicinc.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB SS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.
Fixes: ca4db2b538 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: 84ad9ac8d9 ("arm64: dts: qcom: sdm845: fix USB wakeup interrupt types")
Fixes: ca4db2b538 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: 0dc0f6da3d ("arm64: dts: qcom: sc8180x: fix USB wakeup interrupt types")
Fixes: b080f53a8f ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Cc: stable@vger.kernel.org # 6.5
Cc: Vinod Koul <vkoul@kernel.org>
Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MCLK clocks of codec macros have fixed 19.2 MHz frequency and
assigning clock rates is redundant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231213162856.188566-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pin configuration for Soundwire bus should be set in Soundwire
controller nodes, not in the associated macro codec node. This
placement change should not have big impact in general, because macro
codec is a clock provider for Soundwire controller, thus its devices is
probed first. However it will have impact for disabled Soundwire buses,
e.g. WSA2, because after this change the pins will be left in default
state.
We also follow similar approach in newer SoCs, like Qualcomm SM8650.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231213162856.188566-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MCLK clocks of codec macros have fixed 19.2 MHz frequency and
assigning clock rates is redundant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231213162856.188566-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pin configuration for Soundwire bus should be set in Soundwire
controller nodes, not in the associated macro codec node. This
placement change should not have big impact in general, because macro
codec is a clock provider for Soundwire controller, thus its devices is
probed first. However it will have impact for disabled Soundwire buses,
e.g. WSA2, because after this change the pins will be left in default
state.
We also follow similar approach in newer SoCs, like Qualcomm SM8650.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231213162856.188566-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Qualcomm SM8550 RX Soundwire port configuration was taken from
downstream sources ("rx_frame_params_default"), but without two ports.
Correct the DTS, even though no practical impact was observed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231212185415.228003-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Review of v1 patch resulting in commit 58872a54e4 ("arm64: dts: qcom:
sm8650: add ADSP audio codec macros") pointed to remove unneeded
assigned-clock-rates from macro codecs. One assignment was left in WSA
macro codec, so drop it now as it is redundant: these clocks have fixed
19.2 MHz frequency.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231212133143.100575-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
While applying the original patch, some things got messed up and it
didn't apply to the correct section. Move the compatible to the correct
location to fix that.
Fixes: bfccc19519 ("dt-bindings: arm: qcom: Add HTC One Mini 2")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231211-htc-memul-fixup-v1-1-c0aeab5aaf44@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use devm_kasprintf() instead of open coding it. This saves the need of
an intermediate buffer.
There was also no reason to use devm_kstrdup_const() as string is known
to be constant.
[kwilczynski: commit log, and add missing Reviewed-by tag]
Link: https://lore.kernel.org/linux-pci/1bad6879083a7d836c8a47418a0afa22485e8f69.1700294127.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently zynqmp divider round rate is considering single parent and
calculating rate and parent rate accordingly. But if divider clock flag
is set to SET_RATE_PARENT then its not trying to traverse through all
parent rate and not selecting best parent rate from that. So use common
divider_round_rate() which is traversing through all clock parents and
its rate and calculating proper parent rate.
Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112916.23125-3-jay.buddhabhatti@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Currently zynqmp clock driver is not calculating closest mux rate and
because of that Linux is not setting proper frequency for CPU and
not able to set given frequency for dynamic frequency scaling.
E.g., In current logic initial acpu clock parent and frequency as below
apll1 0 0 0 2199999978 0 0 50000 Y
acpu0_mux 0 0 0 2199999978 0 0 50000 Y
acpu0_idiv1 0 0 0 2199999978 0 0 50000 Y
acpu0 0 0 0 2199999978 0 0 50000 Y
After changing acpu frequency to 549999994 Hz using CPU freq scaling its
selecting incorrect parent which is not closest frequency.
rpll_to_xpd 0 0 0 1599999984 0 0 50000 Y
acpu0_mux 0 0 0 1599999984 0 0 50000 Y
acpu0_div1 0 0 0 533333328 0 0 50000 Y
acpu0 0 0 0 533333328 0 0 50000 Y
Parent should remain same since 549999994 = 2199999978 / 4.
So use __clk_mux_determine_rate_closest() generic function to calculate
closest rate for mux clock. After this change its selecting correct
parent and correct clock rate.
apll1 0 0 0 2199999978 0 0 50000 Y
acpu0_mux 0 0 0 2199999978 0 0 50000 Y
acpu0_div1 0 0 0 549999995 0 0 50000 Y
acpu0 0 0 0 549999995 0 0 50000 Y
Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112916.23125-2-jay.buddhabhatti@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In cases where mapping of mpmu/apmu/apbc registers fails, the code path
does not handle the failure gracefully, potentially leading to a memory
leak. This fix ensures proper cleanup by freeing the allocated memory
for 'pxa_unit' before returning.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20231210175232.3414584-1-visitorckw@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In cases where kcalloc() fails for the 'clk_data->clks' allocation, the
code path does not handle the failure gracefully, potentially leading
to a memory leak. This fix ensures proper cleanup by freeing the
allocated memory for 'clk_data' before returning.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20231210165040.3407545-1-visitorckw@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
devm_platform_ioremap_resource() never returns NULL pointer,
it will return ERR_PTR() when it fails, so replace the check
with IS_ERR().
Fixes: d54c1fd4a5 ("clk: Add Sunplus SP7021 clock driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20231128133016.2494699-1-yangyingliang@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
phylink_parse_mode() populates all possible supported link modes for a
given phy_interface_t, for the case where a phylib phy may be absent and
we can't retrieve the supported link modes from that.
Russell points out that since the introduction of the generic validation
helpers phylink_get_capabilities() and phylink_caps_to_linkmodes(), we
can rewrite this procedure to populate the pl->supported mask, so that
instead of spelling out the link modes, we derive an intermediary
mac_capabilities bit field, and we convert that to the equivalent link
modes.
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix a clk name, clk parent, and a register for a clk gate in the
Rockchip rk3128 clk driver
- Add a PLL frequency on Rockchip rk3568 to fix some display artifacts
- Fix a kbuild dependency for Qualcomm's SM_CAMCC_8550 symbol so that
it isn't possible to select the associated GCC driver
-----BEGIN PGP SIGNATURE-----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=GPdk
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk fixes, mostly in the rockchip clk driver:
- Fix a clk name, clk parent, and a register for a clk gate in the
Rockchip rk3128 clk driver
- Add a PLL frequency on Rockchip rk3568 to fix some display
artifacts
- Fix a kbuild dependency for Qualcomm's SM_CAMCC_8550 symbol so that
it isn't possible to select the associated GCC driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name
clk: rockchip: rk3128: Fix aclk_peri_src's parent
clk: qcom: Fix SM_CAMCC_8550 dependencies
clk: rockchip: rk3128: Fix HCLK_OTG gate register
clk: rockchip: rk3568: Add PLL rate for 292.5MHz
- Add interrupt controller and Ethernet clocks and resets on RZ/G3S,
- Check reset monitor registers on RZ/G2L-alike SoCs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZXxBPgAKCRCKwlD9ZEnx
cHOdAPwLyw82xWzHj0lw0lxxMuBqDjewdg4BZMX8PpAxSD8krgD/W4oeBqKijlGh
cCuuvH5Y4H5DoOR25uEsY807r7YZPAA=
=TN05
-----END PGP SIGNATURE-----
Merge tag 'renesas-clk-for-v6.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas
Pull Renesas clk driver updates from Geert Uytterhoeven:
- Add interrupt controller and Ethernet clocks and resets on Renesas RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
* tag 'renesas-clk-for-v6.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: r9a08g045: Add clock and reset support for ETH0 and ETH1
clk: renesas: rzg2l: Check reset monitor registers
clk: renesas: r9a08g045: Add IA55 pclk and its reset
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmV4yOoQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgeNvCACzzOVPW/PVyJuremUUHmugFwQ8+2p0W4Zw
iHtH+6AydmJZpenlFZyYtzEhxkq7L3sOgPysrtcpy6AciEXArM8wIVREwsde5nDp
BpHLEyJURljo77lCygdJ1SW/XVKwqF8gjkexJRD4uNyNeFJ5ut/kcxcyNfTyxUnG
BjPjMZMzHFSpJ+rGKdLiFfc7aUDes2d5k1ygVmx5mKJOFpJDqsXmoOYICttmCTDN
6OMZZGBnMu0q9c1HLK3I6y5kYTB/q6KKe1eWj1zfvUgL21YWQA7fHR/GPLkq6ynB
JdXkGV9rkwdi2+Qe1zjDuuGo65gcUMZ9iIlAR5T4TVp68p6ZehHq
=oZIU
-----END PGP SIGNATURE-----
Merge tag 'v6.8-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip
Pull Rockchip clk driver updates from Heiko Stuebner:
Two new pll rates and an additional critical clock on rk3568.
* tag 'v6.8-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: rk3568: Mark pclk_usb as critical
clk: rockchip: rk3568: Add PLL rate for 126.4MHz
clk: rockchip: rk3568: Add PLL rate for 115.2MHz
Similar to the Renesas RZ/Five[1] the JH7100 SoC needs the non-portable
CONFIG_DMA_GLOBAL_POOL enabled which is incompatible with DMA_DIRECT_REMAP
selected by RISCV_ISA_ZICBOM.
[1]: commit 31b2daea07 ("soc: renesas: Make RZ/Five depend on !DMA_DIRECT_REMAP")
Link: https://lore.kernel.org/all/24942b4d-d16a-463f-b39a-f9dfcb89d742@infradead.org/
Fixes: 64fc984a8a ("riscv: errata: Add StarFive JH7100 errata")
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
- Fix eventfs to check creating new files for events with names greater than
NAME_MAX. The eventfs lookup needs to check the return result of
simple_lookup().
- Fix the ring buffer to check the proper max data size. Events must be able to
fit on the ring buffer sub-buffer, if it cannot, then it fails to be written
and the logic to add the event is avoided. The code to check if an event can
fit failed to add the possible absolute timestamp which may make the event
not be able to fit. This causes the ring buffer to go into an infinite loop
trying to find a sub-buffer that would fit the event. Luckily, there's a check
that will bail out if it looped over a 1000 times and it also warns.
The real fix is not to add the absolute timestamp to an event that is
starting at the beginning of a sub-buffer because it uses the sub-buffer
timestamp. By avoiding the timestamp at the start of the sub-buffer allows
events that pass the first check to always find a sub-buffer that it can fit
on.
- Have large events that do not fit on a trace_seq to print "LINE TOO BIG" like
it does for the trace_pipe instead of what it does now which is to silently
drop the output.
- Fix a memory leak of forgetting to free the spare page that is saved by a
trace instance.
- Update the size of the snapshot buffer when the main buffer is updated if the
snapshot buffer is allocated.
- Fix ring buffer timestamp logic by removing all the places that tried to put
the before_stamp back to the write stamp so that the next event doesn't add
an absolute timestamp. But each of these updates added a race where by making
the two timestamp equal, it was validating the write_stamp so that it can be
incorrectly used for calculating the delta of an event.
- There's a temp buffer used for printing the event that was using the event
data size for allocation when it needed to use the size of the entire event
(meta-data and payload data)
- For hardening, use "%.*s" for printing the trace_marker output, to limit the
amount that is printed by the size of the event. This was discovered by
development that added a bug that truncated the '\0' and caused a crash.
- Fix a use-after-free bug in the use of the histogram files when an instance
is being removed.
- Remove a useless update in the rb_try_to_discard of the write_stamp. The
before_stamp was already changed to force the next event to add an absolute
timestamp that the write_stamp is not used. But the write_stamp is modified
again using an unneeded 64-bit cmpxchg.
- Fix several races in the 32-bit implementation of the rb_time_cmpxchg() that
does a 64-bit cmpxchg.
- While looking at fixing the 64-bit cmpxchg, I noticed that because the ring
buffer uses normal cmpxchg, and this can be done in NMI context, there's some
architectures that do not have a working cmpxchg in NMI context. For these
architectures, fail recording events that happen in NMI context.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZX0nChQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlOMAQD3iegTcceQl9lAsroa3tb3xdweC1GP
51MsX5athxSyoQEAutI/2pBCtLFXgTLMHAMd5F23EM1U9rha7W0myrnvKQY=
=d3bS
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix eventfs to check creating new files for events with names greater
than NAME_MAX. The eventfs lookup needs to check the return result of
simple_lookup().
- Fix the ring buffer to check the proper max data size. Events must be
able to fit on the ring buffer sub-buffer, if it cannot, then it
fails to be written and the logic to add the event is avoided. The
code to check if an event can fit failed to add the possible absolute
timestamp which may make the event not be able to fit. This causes
the ring buffer to go into an infinite loop trying to find a
sub-buffer that would fit the event. Luckily, there's a check that
will bail out if it looped over a 1000 times and it also warns.
The real fix is not to add the absolute timestamp to an event that is
starting at the beginning of a sub-buffer because it uses the
sub-buffer timestamp.
By avoiding the timestamp at the start of the sub-buffer allows
events that pass the first check to always find a sub-buffer that it
can fit on.
- Have large events that do not fit on a trace_seq to print "LINE TOO
BIG" like it does for the trace_pipe instead of what it does now
which is to silently drop the output.
- Fix a memory leak of forgetting to free the spare page that is saved
by a trace instance.
- Update the size of the snapshot buffer when the main buffer is
updated if the snapshot buffer is allocated.
- Fix ring buffer timestamp logic by removing all the places that tried
to put the before_stamp back to the write stamp so that the next
event doesn't add an absolute timestamp. But each of these updates
added a race where by making the two timestamp equal, it was
validating the write_stamp so that it can be incorrectly used for
calculating the delta of an event.
- There's a temp buffer used for printing the event that was using the
event data size for allocation when it needed to use the size of the
entire event (meta-data and payload data)
- For hardening, use "%.*s" for printing the trace_marker output, to
limit the amount that is printed by the size of the event. This was
discovered by development that added a bug that truncated the '\0'
and caused a crash.
- Fix a use-after-free bug in the use of the histogram files when an
instance is being removed.
- Remove a useless update in the rb_try_to_discard of the write_stamp.
The before_stamp was already changed to force the next event to add
an absolute timestamp that the write_stamp is not used. But the
write_stamp is modified again using an unneeded 64-bit cmpxchg.
- Fix several races in the 32-bit implementation of the
rb_time_cmpxchg() that does a 64-bit cmpxchg.
- While looking at fixing the 64-bit cmpxchg, I noticed that because
the ring buffer uses normal cmpxchg, and this can be done in NMI
context, there's some architectures that do not have a working
cmpxchg in NMI context. For these architectures, fail recording
events that happen in NMI context.
* tag 'trace-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not record in NMI if the arch does not support cmpxchg in NMI
ring-buffer: Have rb_time_cmpxchg() set the msb counter too
ring-buffer: Fix 32-bit rb_time_read() race with rb_time_cmpxchg()
ring-buffer: Fix a race in rb_time_cmpxchg() for 32 bit archs
ring-buffer: Remove useless update to write_stamp in rb_try_to_discard()
ring-buffer: Do not try to put back write_stamp
tracing: Fix uaf issue when open the hist or hist_debug file
tracing: Add size check when printing trace_marker output
ring-buffer: Have saved event hold the entire event
ring-buffer: Do not update before stamp when switching sub-buffers
tracing: Update snapshot buffer on resize if it is allocated
ring-buffer: Fix memory leak of free page
eventfs: Fix events beyond NAME_MAX blocking tasks
tracing: Have large events show up as '[LINE TOO BIG]' instead of nothing
ring-buffer: Fix writing to the buffer with max_data_size
This dts adds support for Motorola Moto G 4G released in 2013.
Add a device tree with initial support for:
- GPIO keys
- Hall sensor
- SDHCI
- Vibrator
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231214-peregrine-v2-2-a35102268442@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If "regmap" is an error pointer then calling regmap_update_bits() will
crash. We only need to call regmap_update_bits() if we had written to
it earlier.
Fixes: ff93872a9c ("clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/210d48ce-6ebc-4a6b-b30f-866d10d41a16@moroto.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add dedicated compatible for the SDHCI MMC controller, because usage of
generic qcom,sdhci-msm-v4 compatible alone is deprecated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231211085830.25380-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add dedicated compatible for the SDHCI MMC controller, because usage of
generic qcom,sdhci-msm-v4 compatible alone is deprecated.
Cc: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231211085830.25380-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a node is only one in port or one out port, address-cells and
size-cells are not required in in-ports and out-ports. And the number
and reg of the port need to be removed.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-5-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
out-ports is a required property for coresight ETM. Add out-ports for
ETM nodes to fix the warning.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-4-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the inport of funnel@3023000 to fix 'in-ports' is a required property
warning.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-3-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Ensure read and write locks for the channel are not taken in succession by
dropping the read lock from parse_xfer_event() such that a callback given
to client can potentially queue buffers and acquire the write lock in that
process. Any queueing of buffers should be done without channel read lock
acquired as it can result in multiple locks and a soft lockup.
Cc: <stable@vger.kernel.org> # 5.7
Fixes: 1d3173a3ba ("bus: mhi: core: Add support for processing events from client device")
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1702276972-41296-3-git-send-email-quic_qianyu@quicinc.com
[mani: added fixes tag and cc'ed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>