CONFIG_HWSPINLOCK must be selected explicitly for SMEM and its
dependencies to be enabled.
The update is generated by "make savedefconfig" and as such reflects
changes to the implicit state of other options, as of v4.14-rc1.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Egil Hjelmeland says:
====================
lan9303: Add basic offloading of unicast traffic
This series add basic offloading of unicast traffic to the lan9303
DSA driver.
Review welcome!
Changes v1 -> v2:
- Patch 1: Codestyle linting.
- Patch 2: Remember SWE_PORT_STATE while not bridged.
Added constant LAN9303_SWE_PORT_MIRROR_DISABLED.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When both user ports are joined to the same bridge, the normal
HW MAC learning is enabled. This means that unicast traffic is forwarded
in HW.
If one of the user ports leave the bridge,
the ports goes back to the initial separated operation.
Port separation relies on disabled HW MAC learning. Hence the condition
that both ports must join same bridge.
Add brigde methods port_bridge_join, port_bridge_leave and
port_stp_state_set.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare for next patch:
Move tag setup from lan9303_separate_ports() to new function
lan9303_setup_tagging()
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
This introduces the usb node which can be used e.g. for USB_ETH
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This introduces the eMMC sdhci node and its pinctrl state
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The voltages are pulled from the vendor source tree.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This introduces the gpio-keys nodes for keys of the FP2 and the
associated pinctrl state.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This DTS has support for the Fairphone 2 (codenamed FP2).
This first version of the DTS supports just the serial console via the
MSM UART pins.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This adds the GSBI6 and GSBI7 IO blocks to the MSM8660 DTSI file.
On the APQ8060 DragonBoard, GSBI6 DM is used for Bluetooth UART,
and GSBI7 I2C is used for FM radio I2C.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This adds a basic DTS file for the Sony Xperia Z2 Tablet, containing
definitions for regulators, eMMC/SD-card, USB, WiFi, Touchscreen,
charger, backlight, coincell and buttons.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch marks gsbi i2c node at soc level dtsi, so that kernel
would not assume that its enabled and result in pin conflicts on
some boards like IFC6410 which do use these pins for uart.
Without this patch we see below pin conflict:
apq8064-pinctrl 800000.pinctrl: pin GPIO_16 already requested by
16540000.serial; cannot claim for 16580000.i2c
apq8064-pinctrl 800000.pinctrl: pin-16 (16580000.i2c) status -22
apq8064-pinctrl 800000.pinctrl: could not request pin 16 (GPIO_16)
from group gpio16 on device 800000.pinctrl
i2c_qup 16580000.i2c: Error applying setting, reverse things back
i2c_qup: probe of 16580000.i2c failed with error -22
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds the necessary #phy-cells property to the DSI and HDMI
phys.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Yury reported crash with this signature :
[ 554.034021] [<ffff80003ccd5a58>] 0xffff80003ccd5a58
[ 554.034156] [<ffff00000888fd34>] skb_release_all+0x14/0x30
[ 554.034288] [<ffff00000888fd64>] __kfree_skb+0x14/0x28
[ 554.034409] [<ffff0000088ece6c>] tcp_sendmsg_locked+0x4dc/0xcc8
[ 554.034541] [<ffff0000088ed68c>] tcp_sendmsg+0x34/0x58
[ 554.034659] [<ffff000008919fd4>] inet_sendmsg+0x2c/0xf8
[ 554.034783] [<ffff0000088842e8>] sock_sendmsg+0x18/0x30
[ 554.034928] [<ffff0000088861fc>] SyS_sendto+0x84/0xf8
Problem is that skb->destructor contains garbage, and this is
because I accidentally removed tcp_skb_tsorted_anchor_cleanup()
from tcp_unlink_write_queue()
This would trigger with a write(fd, <invalid_memory>, len) attempt,
and we will add to packetdrill this capability to avoid future
regressions.
Fixes: 75c119afe1 ("tcp: implement rb-tree based retransmit queue")
Reported-by: Yury Norov <ynorov@caviumnetworks.com>
Tested-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Tegra PCI host controller can generate configuration space accesses
with byte, word and dword granularity for devices. Only root ports can't
have their configuration space accessed in this way.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
changeset 6bbf7a855d ("media: dvbdev: convert DVB device types into an enum")
added a new warning on gcc 6:
>> drivers/media/dvb-core/dvbdev.c:86:1: warning: control reaches end of non-void function [-Wreturn-type]
That's because gcc is not smart enough to see that all types are
present at the switch. Also, the current code is not too optimized.
So, replace it to a more optimized one, based on a static table.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 6bbf7a855d ("media: dvbdev: convert DVB device types into an enum")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add shutdown handler to cleanly turn off clocks. This will help in cases of
kexec where in a new kernel can boot abruptly.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Fix more return codes for device property: Align return codes of
__acpi_node_get_property_reference().
In particular, what was missed previously:
-EPROTO could be returned in certain cases, now -EINVAL;
-EINVAL was returned if the property was not found, now -ENOENT;
-EINVAL was returned also if the index was higher than the number of
entries in a package, now -ENOENT.
Reported-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Fixes: 3e3119d308 (device property: Introduce fwnode_property_get_reference_args)
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_fwnode_get_reference_args(), the function implementing ACPI
support for fwnode_property_get_reference_args(), returns directly
error codes from __acpi_node_get_property_reference(). The latter
uses different error codes than the OF implementation. In particular,
the OF implementation uses -ENOENT to indicate that the property is
not found, a reference entry is empty and there are no more
references.
Document and align the error codes for property for
fwnode_property_get_reference_args() so that they match with
of_parse_phandle_with_args().
Fixes: 3e3119d308 (device property: Introduce fwnode_property_get_reference_args)
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Turn intel_dp_source_supports_hbr2() into a simple helper to query the
pre-filled source rates array, and move the conditions about which
platforms support which rates to the single point of truth in
intel_dp_set_source_rates().
This also reduces the code paths you have to think about in the source
rates initialization in intel_dp_set_source_rates(), making it easier to
grasp.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009092959.29021-2-jani.nikula@intel.com
This corrects two mistakes in the Qualcomm GLINK SMEM driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=W1P1
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v4.14-fixes' of git://github.com/andersson/remoteproc
Pull rpmsg fixes from Bjorn Andersson:
"This corrects two mistakes in the Qualcomm GLINK SMEM driver"
* tag 'rpmsg-v4.14-fixes' of git://github.com/andersson/remoteproc:
rpmsg: glink: Fix memory leak in qcom_glink_alloc_intent()
rpmsg: glink: Unlock on error in qcom_glink_request_intent()
This fixes a couple of issues in the imx_rproc driver and corrects the Kconfig
dependencies of the Qualcomm remoteproc drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KwYX
-----END PGP SIGNATURE-----
Merge tag 'rproc-v4.14-fixes' of git://github.com/andersson/remoteproc
Pull remoteproc fixes from Bjorn Andersson:
"This fixes a couple of issues in the imx_rproc driver and corrects the
Kconfig dependencies of the Qualcomm remoteproc drivers"
* tag 'rproc-v4.14-fixes' of git://github.com/andersson/remoteproc:
remoteproc: imx_rproc: fix return value check in imx_rproc_addr_init()
remoteproc: qcom: fix RPMSG_QCOM_GLINK_SMEM dependencies
remoteproc: imx_rproc: fix a couple off by one bugs
The ls1012a implements only 1 MSI controller, and it is the same as
ls1043a.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Minghuan Lian <minghuan.Lian@nxp.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
With intel_encoder_current_mode() using the normal state readout code it
actually works on PCH platforms as well. So let's nuke the PCH check from
intel_lvds_init(). I suppose there aren't any machines that actually
need this, but at least we get to eliminate a few lines of code, and one
FIXME.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009161951.22420-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Coverity-scan recently found a possible NULL pointer dereference in
fc_block_scsi_eh() as starget_to_rport() either returns the rport for
the startget or NULL.
While it is rather unlikely to have fc_block_scsi_eh() called without an
rport associated it's a good idea to catch potential misuses of the API
gracefully.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When checking to see if a PCI slot can safely be reset, we previously
checked to see if any of the children had their PCI_DEV_FLAGS_NO_BUS_RESET
flag set.
Some PCIe root port bridges do not behave well after a slot reset, and may
cause the device in the slot to become unusable.
Add a check for PCI_DEV_FLAGS_NO_BUS_RESET being set in the bridge device
to prevent the slot from being reset.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
In case of mgmt cmds, task->hdr is dereferenced after transmitting the
pdu in iscsi_tcp_task_xmit(). To handle this case current code
increments the Tx skb reference count and frees the skb in
cxgbi_cleanup_task(). In some error cases this results in skb leak.
To fix this in case of mgmt cmds, allocate a separate buffer for iSCSI
hdr and free this buffer in cxgbi_cleanup_task().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When checking to see if a PCI bus can safely be reset, we previously
checked to see if any of the children had their PCI_DEV_FLAGS_NO_BUS_RESET
flag set. Children marked with that flag are known not to behave well
after a bus reset.
Some PCIe root port bridges also do not behave well after a bus reset,
sometimes causing the devices behind the bridge to become unusable.
Add a check for PCI_DEV_FLAGS_NO_BUS_RESET being set in the bridge device
to allow these bridges to be flagged, and prevent their secondary buses
from being reset.
Signed-off-by: David Daney <david.daney@cavium.com>
[jglauber@cavium.com: fixed typo]
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
In case of connection reset Tx skb queue can have some skbs which are
not transmitted so purge Tx skb queue in release_offload_resources() to
avoid skb leak.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In case of vlan pass 0 as ifindex to find route instead of passing
real_dev ifindex, if we pass real_dev ifindex then
ip_route_output_ports() and ip6_route_output() will check for route
through real_dev not through vlan interface.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Root ports of cn8xxx do not function after bus reset when used with some
e1000e and LSI HBA devices. Add a quirk to prevent bus reset on these root
ports.
Signed-off-by: David Daney <david.daney@cavium.com>
[jglauber@cavium.com: fixed typo and whitespaces]
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Update the description of 'scsi_logging_level' from 8 4-bit nibbles to
the (pre-git) reality of 10 3-bit bitfields.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Kyle Fortin <kyle.fortin@oracle.com>
Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Provide driver version in host data to FW.
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add version 1 of GET_HBA_NAME to fetch port specific IQN first.
If it fails use version 0 to get the IQN.
To use this old IQN names of interfaces needs to be cleared from
the iscsiadm database.
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
be_cmd_get_initname pulls GET_HBA_NAME response of 276 bytes in embedded
WRB buffer of 236 bytes.
Use non-embedded functions to issue the IOCTL.
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
beiscsi_modify_eq_delay is using embedded command to send request of 788
bytes in 236 bytes buffer. Non-embedded command needs to be used in such
cases.
Use mgmt_alloc_cmd_data fn modified to allow passing of subsystem. Use
mgmt_exec_nonemb_cmd fn modified to allow setting of callback.
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In beiscsi_dev_probe, allocated msi_name does not get freed and enabled
HW interrupts are not disabled in iscsi_host_add error case.
Add beiscsi_free_irqs fn to handle the cleanup in probe and disable port.
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
mgmt_open_connection is expected to return tag not errno.
In error case, just return invalid tag 0.
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The boot flags exported through sysfs was wrongly reverted to 2. Use
boot flag 3 required per spec.
Bit 0 Block valid flag
Bit 1 Firmware booting selected
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kcalloc".
This issue was detected by using the Coccinelle software.
* Replace the specification of a data type by a pointer dereference
to make the corresponding size determination a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Replace the specification of data structures by pointer dereferences
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Omit extra messages for a memory allocation failure in these functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
It is no longer possible to build BT_HCIUART into the kernel
when SERIAL_DEV_BUS is a loadable module, even if none of the
SERIAL_DEV_BUS based implementations are selected:
drivers/bluetooth/hci_ldisc.o: In function `hci_uart_set_flow_control':
hci_ldisc.c:(.text+0xb40): undefined reference to `serdev_device_set_flow_control'
hci_ldisc.c:(.text+0xb5c): undefined reference to `serdev_device_set_tiocm'
This adds a dependency to avoid the broken configuration.
Fixes: 7841d55480 ("Bluetooth: hci_uart_set_flow_control: Fix NULL deref when using serdev")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>