[ Upstream commit 70fec46519 ]
[WHY]
Soft hang/lag observed during 10bit playback + moving cursor, corruption
observed in other tickets for same reason, also failing MPO.
1. Currently, we are always running
calculate_lowest_supported_state_for_temp_read which is only
necessary on dGPU
2. Fast validate path does not apply DET buffer allocation policy
3. Prefetch UrgBFactor chroma parameter not populated in prefetch
calculation
[HOW]
1. Add a check to see if we are on APU, if so, skip the code
2. Add det buffer alloc policy checks to fast validate path
3. Populate UrgentBurstChroma param in call to calculate
UrgBChroma prefetch values
-revision commits: small formatting/brackets/null check addition + remove test change + dGPU code
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8403be6ee ]
The set_connector_edid() function returns a bogus 0, performing the
check on the connector->funcs->fill_modes() result internally. Make the
function pass the fill_modes()'s return value to the caller and move
corresponding checks to the caller site.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-3-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d80b5c5b9b ]
I have tested these panels on the Framework Laptop 13 AMD with firmware
revision 3.05 (latest at time of submission).
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241111-amdgpu-min-backlight-quirk-v7-4-f662851fda69@weissschuh.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 916ecc0db3 ]
The value of "min_input_signal" returned from ATIF on a Framework AMD 13
is "12". This leads to a fairly bright minimum display backlight.
Add a quirk to override that the minimum backlight PWM to "0" which
leads to a much lower minimum brightness, which is still visible.
Tested on a Framework AMD 13 BIOS 3.05 with the matte panel.
Link: https://community.frame.work/t/25711/9
Link: https://community.frame.work/t/47036
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241111-amdgpu-min-backlight-quirk-v7-3-f662851fda69@weissschuh.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22e5c7ae12 ]
Panels using a PWM-controlled backlight source do not have a standard
way to communicate their valid PWM ranges.
On x86 the ranges are read from ACPI through driver-specific tables.
The built-in ranges are not necessarily correct, or may grow stale if an
older device can be retrofitted with newer panels.
Add a quirk infrastructure with which the minimum valid backlight value
can be maintained as part of the kernel.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241111-amdgpu-min-backlight-quirk-v7-1-f662851fda69@weissschuh.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3c55b8ab6 ]
Having a fence linked to a virtio_gpu_framebuffer in the plane update
sequence would cause conflict when several planes referencing the same
framebuffer (e.g. Xorg screen covering multi-displays configured for an
extended mode) and those planes are updated concurrently. So it is needed
to allocate a fence for every plane state instead of the framebuffer.
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
[dmitry.osipenko@collabora.com: rebase, fix up, edit commit message]
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241020230803.247419-2-dmitry.osipenko@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bee9e84060 ]
The code implicitly operates on AMD-based systems by matching on PCI
IDs. However, the use of these IDs is going away.
Add an explicit CPU vendor check instead of relying on PCI IDs.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-3-yazen.ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e638072e61 ]
Lockdep has a set of configs used to determine the size of the static
arrays that it uses. However, the upper limit that was initially setup
for these configs is too high (30 bit shift). This equates to several
GiB of static memory for individual symbols. Using such high values
leads to linker errors:
$ make defconfig
$ ./scripts/config -e PROVE_LOCKING --set-val LOCKDEP_BITS 30
$ make olddefconfig all
[...]
ld: kernel image bigger than KERNEL_IMAGE_SIZE
ld: section .bss VMA wraps around address space
Adjust the upper limits to the maximum values that avoid these issues.
The need for anything more, likely points to a problem elsewhere. Note
that LOCKDEP_CHAINS_BITS was intentionally left out as its upper limit
had a different symptom and has already been fixed [1].
Reported-by: J. R. Okajima <hooanon05g@gmail.com>
Closes: https://lore.kernel.org/all/30795.1620913191@jrobl/ [1]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241024183631.643450-2-cmllamas@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2190966fbc ]
Avoid unreachable() as it can (and will in the absence of UBSAN)
generate fallthrough code. Use BUG() so we get a UD2 trap (with
unreachable annotation).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20241128094312.028316261@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 108ad09990 ]
When steal time exceeds the measured delta when updating clock_task, we
currently try to catch up the excess in future updates.
However, this results in inaccurate run times for the future things using
clock_task, in some situations, as they end up getting additional steal
time that did not actually happen.
This is because there is a window between reading the elapsed time in
update_rq_clock() and sampling the steal time in update_rq_clock_task().
If the VCPU gets preempted between those two points, any additional
steal time is accounted to the outgoing task even though the calculated
delta did not actually contain any of that "stolen" time.
When this race happens, we can end up with steal time that exceeds the
calculated delta, and the previous code would try to catch up that excess
steal time in future clock updates, which is given to the next,
incoming task, even though it did not actually have any time stolen.
This behavior is particularly bad when steal time can be very long,
which we've seen when trying to extend steal time to contain the duration
that the host was suspended [0]. When this happens, clock_task stays
frozen, during which the running task stays running for the whole
duration, since its run time doesn't increase.
However the race can happen even under normal operation.
Ideally we would read the elapsed cpu time and the steal time atomically,
to prevent this race from happening in the first place, but doing so
is non-trivial.
Since the time between those two points isn't otherwise accounted anywhere,
neither to the outgoing task nor the incoming task (because the "end of
outgoing task" and "start of incoming task" timestamps are the same),
I would argue that the right thing to do is to simply drop any excess steal
time, in order to prevent these issues.
[0] https://lore.kernel.org/kvm/20240820043543.837914-1-suleiman@google.com/
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241118043745.1857272-1-suleiman@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a4730b325 ]
This BUG_ON is meant to catch backref cache problems, but these can
arise from either bugs in the backref cache or corruption in the extent
tree. Fix it to be a proper error.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5324c4e10e ]
A data race occurs when the function `insert_ordered_extent_file_extent()`
and the function `btrfs_inode_safe_disk_i_size_write()` are executed
concurrently. The function `insert_ordered_extent_file_extent()` is not
locked when reading inode->disk_i_size, causing
`btrfs_inode_safe_disk_i_size_write()` to cause data competition when
writing inode->disk_i_size, thus affecting the value of `modify_tree`.
The specific call stack that appears during testing is as follows:
============DATA_RACE============
btrfs_drop_extents+0x89a/0xa060 [btrfs]
insert_reserved_file_extent+0xb54/0x2960 [btrfs]
insert_ordered_extent_file_extent+0xff5/0x1760 [btrfs]
btrfs_finish_one_ordered+0x1b85/0x36a0 [btrfs]
btrfs_finish_ordered_io+0x37/0x60 [btrfs]
finish_ordered_fn+0x3e/0x50 [btrfs]
btrfs_work_helper+0x9c9/0x27a0 [btrfs]
process_scheduled_works+0x716/0xf10
worker_thread+0xb6a/0x1190
kthread+0x292/0x330
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30
============OTHER_INFO============
btrfs_inode_safe_disk_i_size_write+0x4ec/0x600 [btrfs]
btrfs_finish_one_ordered+0x24c7/0x36a0 [btrfs]
btrfs_finish_ordered_io+0x37/0x60 [btrfs]
finish_ordered_fn+0x3e/0x50 [btrfs]
btrfs_work_helper+0x9c9/0x27a0 [btrfs]
process_scheduled_works+0x716/0xf10
worker_thread+0xb6a/0x1190
kthread+0x292/0x330
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30
=================================
The main purpose of the check of the inode's disk_i_size is to avoid
taking write locks on a btree path when we have a write at or beyond
EOF, since in these cases we don't expect to find extent items in the
root to drop. However if we end up taking write locks due to a data
race on disk_i_size, everything is still correct, we only add extra
lock contention on the tree in case there's concurrency from other tasks.
If the race causes us to not take write locks when we actually need them,
then everything is functionally correct as well, since if we find out we
have extent items to drop and we took read locks (modify_tree set to 0),
we release the path and retry again with write locks.
Since this data race does not affect the correctness of the function,
it is a harmless data race, use data_race() to check inode->disk_i_size.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Hao-ran Zheng <zhenghaoran154@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a88c26bb8e ]
exrl is present in all machines currently supported, therefore prefer
it over ex. This saves one instruction and doesn't need an additional
register to hold the address of the target instruction.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 543841d180 ]
Zbigniew mentioned at Linux Plumber's that systemd is interested in
switching to execveat() for service execution, but can't, because the
contents of /proc/pid/comm are the file descriptor which was used,
instead of the path to the binary[1]. This makes the output of tools like
top and ps useless, especially in a world where most fds are opened
CLOEXEC so the number is truly meaningless.
When the filename passed in is empty (e.g. with AT_EMPTY_PATH), use the
dentry's filename for "comm" instead of using the useless numeral from
the synthetic fdpath construction. This way the actual exec machinery
is unchanged, but cosmetically the comm looks reasonable to admins
investigating things.
Instead of adding TASK_COMM_LEN more bytes to bprm, use one of the unused
flag bits to indicate that we need to set "comm" from the dentry.
Suggested-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Suggested-by: Tycho Andersen <tandersen@netflix.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://github.com/uapi-group/kernel-features#set-comm-field-before-exec [1]
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Tested-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9c8637933 ]
[BUG]
There is a bug report that btrfs outputs the following error message:
BTRFS info (device nvme0n1p2): qgroup scan completed (inconsistency flag cleared)
BTRFS warning (device nvme0n1p2): failed to cleanup qgroup 0/1179: -2
[CAUSE]
The error itself is pretty harmless, and the end user should ignore it.
When a subvolume is fully dropped, btrfs will call
btrfs_qgroup_cleanup_dropped_subvolume() to delete the qgroup.
However if a qgroup rescan happened before a subvolume fully dropped,
qgroup for that subvolume will not be re-created, as rescan will only
create new qgroup if there is a BTRFS_ROOT_REF_KEY found.
But before we drop a subvolume, the subvolume is unlinked thus there is no
BTRFS_ROOT_REF_KEY.
In that case, btrfs_remove_qgroup() will fail with -ENOENT and trigger
the above error message.
[FIX]
Just ignore -ENOENT error from btrfs_remove_qgroup() inside
btrfs_qgroup_cleanup_dropped_subvolume().
Reported-by: John Shand <jshand2013@gmail.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1236056
Fixes: 839d6ea4f8 ("btrfs: automatically remove the subvolume qgroup")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e06c9e3682 ]
The Microchip LAN966x outband interrupt controller is only present on
Microchip LAN966x SoCs, and only used in PCI endpoint mode. Hence add a
dependency on MCHP_LAN966X_PCI, to prevent asking the user about this
driver when configuring a kernel without Microchip LAN966x PCIe support.
Fixes: 3e3a7b3533 ("irqchip: Add support for LAN966x OIC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/all/28e8a605e72ee45e27f0d06b2b71366159a9c782.1737383314.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2b91cc1214 upstream.
The info.flow_type is for RXFH commands, ntuple flow_type is inside
the flow spec. The check currently does nothing, as info.flow_type
is 0 (or even uninitialized by user space) for ETHTOOL_SRXCLSRLINS.
Fixes: 9e43ad7a1e ("net: ethtool: only allow set_rxnfc with rss + ring_cookie if driver opts in")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250201013040.725123-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2b47df81c upstream.
[BUG]
With CONFIG_DEBUG_VM set, test case generic/476 has some chance to crash
with the following VM_BUG_ON_FOLIO():
BTRFS error (device dm-3): cow_file_range failed, start 1146880 end 1253375 len 106496 ret -28
BTRFS error (device dm-3): run_delalloc_nocow failed, start 1146880 end 1253375 len 106496 ret -28
page: refcount:4 mapcount:0 mapping:00000000592787cc index:0x12 pfn:0x10664
aops:btrfs_aops [btrfs] ino:101 dentry name(?):"f1774"
flags: 0x2fffff80004028(uptodate|lru|private|node=0|zone=2|lastcpupid=0xfffff)
page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio))
------------[ cut here ]------------
kernel BUG at mm/page-writeback.c:2992!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 2 UID: 0 PID: 3943513 Comm: kworker/u24:15 Tainted: G OE 6.12.0-rc7-custom+ #87
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : folio_clear_dirty_for_io+0x128/0x258
lr : folio_clear_dirty_for_io+0x128/0x258
Call trace:
folio_clear_dirty_for_io+0x128/0x258
btrfs_folio_clamp_clear_dirty+0x80/0xd0 [btrfs]
__process_folios_contig+0x154/0x268 [btrfs]
extent_clear_unlock_delalloc+0x5c/0x80 [btrfs]
run_delalloc_nocow+0x5f8/0x760 [btrfs]
btrfs_run_delalloc_range+0xa8/0x220 [btrfs]
writepage_delalloc+0x230/0x4c8 [btrfs]
extent_writepage+0xb8/0x358 [btrfs]
extent_write_cache_pages+0x21c/0x4e8 [btrfs]
btrfs_writepages+0x94/0x150 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x88/0xc8
start_delalloc_inodes+0x178/0x3a8 [btrfs]
btrfs_start_delalloc_roots+0x174/0x280 [btrfs]
shrink_delalloc+0x114/0x280 [btrfs]
flush_space+0x250/0x2f8 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x164/0x408
worker_thread+0x25c/0x388
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: 910a8021 a90363f7 a9046bf9 94012379 (d4210000)
---[ end trace 0000000000000000 ]---
[CAUSE]
The first two lines of extra debug messages show the problem is caused
by the error handling of run_delalloc_nocow().
E.g. we have the following dirtied range (4K blocksize 4K page size):
0 16K 32K
|//////////////////////////////////////|
| Pre-allocated |
And the range [0, 16K) has a preallocated extent.
- Enter run_delalloc_nocow() for range [0, 16K)
Which found range [0, 16K) is preallocated, can do the proper NOCOW
write.
- Enter fallback_to_fow() for range [16K, 32K)
Since the range [16K, 32K) is not backed by preallocated extent, we
have to go COW.
- cow_file_range() failed for range [16K, 32K)
So cow_file_range() will do the clean up by clearing folio dirty,
unlock the folios.
Now the folios in range [16K, 32K) is unlocked.
- Enter extent_clear_unlock_delalloc() from run_delalloc_nocow()
Which is called with PAGE_START_WRITEBACK to start page writeback.
But folios can only be marked writeback when it's properly locked,
thus this triggered the VM_BUG_ON_FOLIO().
Furthermore there is another hidden but common bug that
run_delalloc_nocow() is not clearing the folio dirty flags in its error
handling path.
This is the common bug shared between run_delalloc_nocow() and
cow_file_range().
[FIX]
- Clear folio dirty for range [@start, @cur_offset)
Introduce a helper, cleanup_dirty_folios(), which
will find and lock the folio in the range, clear the dirty flag and
start/end the writeback, with the extra handling for the
@locked_folio.
- Introduce a helper to clear folio dirty, start and end writeback
- Introduce a helper to record the last failed COW range end
This is to trace which range we should skip, to avoid double
unlocking.
- Skip the failed COW range for the error handling
CC: stable@vger.kernel.org
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ade81479c7 upstream.
A soft lockup issue was found in the product with about 56,000 tasks were
in the OOM cgroup, it was traversing them when the soft lockup was
triggered.
watchdog: BUG: soft lockup - CPU#2 stuck for 23s! [VM Thread:1503066]
CPU: 2 PID: 1503066 Comm: VM Thread Kdump: loaded Tainted: G
Hardware name: Huawei Cloud OpenStack Nova, BIOS
RIP: 0010:console_unlock+0x343/0x540
RSP: 0000:ffffb751447db9a0 EFLAGS: 00000247 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000ffffffff
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000247
RBP: ffffffffafc71f90 R08: 0000000000000000 R09: 0000000000000040
R10: 0000000000000080 R11: 0000000000000000 R12: ffffffffafc74bd0
R13: ffffffffaf60a220 R14: 0000000000000247 R15: 0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2fe6ad91f0 CR3: 00000004b2076003 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
vprintk_emit+0x193/0x280
printk+0x52/0x6e
dump_task+0x114/0x130
mem_cgroup_scan_tasks+0x76/0x100
dump_header+0x1fe/0x210
oom_kill_process+0xd1/0x100
out_of_memory+0x125/0x570
mem_cgroup_out_of_memory+0xb5/0xd0
try_charge+0x720/0x770
mem_cgroup_try_charge+0x86/0x180
mem_cgroup_try_charge_delay+0x1c/0x40
do_anonymous_page+0xb5/0x390
handle_mm_fault+0xc4/0x1f0
This is because thousands of processes are in the OOM cgroup, it takes a
long time to traverse all of them. As a result, this lead to soft lockup
in the OOM process.
To fix this issue, call 'cond_resched' in the 'mem_cgroup_scan_tasks'
function per 1000 iterations. For global OOM, call
'touch_softlockup_watchdog' per 1000 iterations to avoid this issue.
Link: https://lkml.kernel.org/r/20241224025238.3768787-1-chenridong@huaweicloud.com
Fixes: 9cbb78bb31 ("mm, memcg: introduce own oom handler to iterate only over its own threads")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76bce9f101 upstream.
Pass the target vCPU to the hwapic_isr_update() vendor hook so that VMX
can defer the update until after nested VM-Exit if an EOI for L1's vAPIC
occurs while L2 is active.
Note, commit d39850f57d ("KVM: x86: Drop @vcpu parameter from
kvm_x86_ops.hwapic_isr_update()") removed the parameter with the
justification that doing so "allows for a decent amount of (future)
cleanup in the APIC code", but it's not at all clear what cleanup was
intended, or if it was ever realized.
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Chao Gao <chao.gao@intel.com>
Tested-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241128000010.4051275-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01130f5260 upstream.
[Why]
When HUBP is power gated, the SW state can get out of sync with the
hardware state causing cursor to not be programmed correctly.
[How]
Similar to DPP, add a HUBP reset function which is called wherever
HUBP is initialized or powergated. This function will clear the cursor
position and attribute cache allowing for proper programming when the
HUBP is brought back up.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sung Lee <sung.lee@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b8b80e993 upstream.
GCC changed the default C standard dialect from gnu17 to gnu23,
which should not have impacted the kernel because it explicitly requests
the gnu11 standard in the main Makefile. However, there are certain
places in the s390 code that use their own CFLAGS without a '-std='
value, which break with this dialect change because of the kernel's own
definitions of bool, false, and true conflicting with the C23 reserved
keywords.
include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant
11 | false = 0,
| ^~~~~
include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards
include/linux/types.h:35:33: error: 'bool' cannot be defined via 'typedef'
35 | typedef _Bool bool;
| ^~~~
include/linux/types.h:35:33: note: 'bool' is a keyword with '-std=c23' onwards
Add '-std=gnu11' to the decompressor and purgatory CFLAGS to eliminate
these errors and make the C standard version of these areas match the
rest of the kernel.
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250122-s390-fix-std-for-gcc-15-v1-1-8b00cadee083@kernel.org
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 021611d33e upstream.
Add a test case to ensure that attaching a tail callee program with an
freplace program fails, and that updating an extended program to a
prog_array map is also prohibited.
This test is designed to prevent the potential infinite loop issue caused
by the combination of tail calls and freplace, ensuring the correct
behavior and stability of the system.
Additionally, fix the broken tailcalls/tailcall_freplace selftest
because an extension prog should not be tailcalled.
cd tools/testing/selftests/bpf; ./test_progs -t tailcalls
337/25 tailcalls/tailcall_freplace:OK
337/26 tailcalls/tailcall_bpf2bpf_freplace:OK
337 tailcalls:OK
Summary: 1/26 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20241015150207.70264-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[ Yifei: bpf freplace update is backported to linux-6.12 by commit 987aa730ba
("bpf: Prevent tailcall infinite loop caused by freplace"). It will cause
selftest #336/25 failed. ]
Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc00550b2a upstream.
This reverts commit ff123eb774.
Allowing large pages for KASAN shadow mappings isn't inherently wrong,
but adding POPULATE_KASAN_MAP_SHADOW to large_allowed() exposes an issue
in can_large_pud() and can_large_pmd().
Since commit d8073dc6bc ("s390/mm: Allow large pages only for aligned
physical addresses"), both can_large_pud() and can_large_pmd() call _pa()
to check if large page physical addresses are aligned. However, _pa()
has a side effect: it allocates memory in POPULATE_KASAN_MAP_SHADOW
mode. This results in massive memory leaks.
The proper fix would be to address both large_allowed() and _pa()'s side
effects, but for now, revert this change to avoid the leaks.
Fixes: ff123eb774 ("s390/mm: Allow large pages for KASAN shadow mapping")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9407190947 upstream.
The check for non-zero ring with RSS is only relevant for
ETHTOOL_SRXCLSRLINS command, in other cases the check tries to access
memory which was not initialized by the userspace tool. Only perform the
check in case of ETHTOOL_SRXCLSRLINS.
Without this patch, filter deletion (for example) could statistically
result in a false error:
# ethtool --config-ntuple eth3 delete 484
rmgr: Cannot delete RX class rule: Invalid argument
Cannot delete classification rule
Fixes: 9e43ad7a1e ("net: ethtool: only allow set_rxnfc with rss + ring_cookie if driver opts in")
Link: https://lore.kernel.org/netdev/871a9ecf-1e14-40dd-bbd7-e90c92f89d47@nvidia.com/
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20241202164805.1637093-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a35672819f upstream.
A recent commit jumped over the dst hash computation and
left the symbol uninitialized. Fix this by explicitly
computing the dst hash before it is used.
Fixes: 0045e3d806 ("xfrm: Cache used outbound xfrm states at the policy.")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d287e70c5 upstream.
Error handling is missing when call to nla_put_u32() fails.
Handle the error when the call to nla_put_u32() returns an error.
The error was reported by Coverity Scan.
Report:
CID 1601525: (#1 of 1): Unused value (UNUSED_VALUE)
returned_value: Assigning value from nla_put_u32(skb, XFRMA_SA_PCPU, x->pcpu_num)
to err here, but that stored value is overwritten before it can be used
Fixes: 1ddf9916ac ("xfrm: Add support for per cpu xfrm state handling.")
Signed-off-by: Everest K.C. <everestkc@everestkc.com.np>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81dfedd523 upstream.
For child node of /reserved-memory, its property 'reg' may contain
multiple regions, but fdt_scan_reserved_mem_reg_nodes() only takes
into account the first region, and miss remaining regions.
But there are no simple approach to fix it, so give user warning
message when miss remaining regions.
Fixes: 8a6e02d0c0 ("of: reserved_mem: Restructure how the reserved memory regions are processed")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20250114-of_core_fix-v5-2-b8bafd00a86f@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0f038104f upstream.
There is a recent ML report that mounting a large fs backed by hardware
RAID56 controller (with one device missing) took too much time, and
systemd seems to kill the mount attempt.
In that case, the only error message is:
BTRFS error (device sdj): open_ctree failed
There is no reason on why the failure happened, making it very hard to
understand the reason.
At least output the error number (in the particular case it should be
-EINTR) to provide some clue.
Link: https://lore.kernel.org/linux-btrfs/9b9c4d2810abcca2f9f76e32220ed9a90febb235.camel@scientia.org/
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Cc: stable@vger.kernel.org
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d28d0ddb9 upstream.
After commit ec6bb299c7 ("md/md-bitmap: add 'sync_size' into struct
md_bitmap_stats"), following panic is reported:
Oops: general protection fault, probably for non-canonical address
RIP: 0010:bitmap_get_stats+0x2b/0xa0
Call Trace:
<TASK>
md_seq_show+0x2d2/0x5b0
seq_read_iter+0x2b9/0x470
seq_read+0x12f/0x180
proc_reg_read+0x57/0xb0
vfs_read+0xf6/0x380
ksys_read+0x6c/0xf0
do_syscall_64+0x82/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Root cause is that bitmap_get_stats() can be called at anytime if mddev
is still there, even if bitmap is destroyed, or not fully initialized.
Deferenceing bitmap in this case can crash the kernel. Meanwhile, the
above commit start to deferencing bitmap->storage, make the problem
easier to trigger.
Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex.
Cc: stable@vger.kernel.org # v6.12+
Fixes: 32a7627cf3 ("[PATCH] md: optimised resync using Bitmap based intent logging")
Reported-and-tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Closes: https://lore.kernel.org/linux-raid/ca3a91a2-50ae-4f68-b317-abd9889f3907@oracle.com/T/#m6e5086c95201135e4941fe38f9efa76daf9666c5
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250124092055.4050195-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17391cb261 upstream.
On pSeries, when user attempts to use the same vfio container used by
different iommu group, the spapr_tce_set_window() returns -EPERM
and the subsequent cleanup leads to the below crash.
Kernel attempted to read user page (308) - exploit attempt?
BUG: Kernel NULL pointer dereference on read at 0x00000308
Faulting instruction address: 0xc0000000001ce358
Oops: Kernel access of bad area, sig: 11 [#1]
NIP: c0000000001ce358 LR: c0000000001ce05c CTR: c00000000005add0
<snip>
NIP [c0000000001ce358] spapr_tce_unset_window+0x3b8/0x510
LR [c0000000001ce05c] spapr_tce_unset_window+0xbc/0x510
Call Trace:
spapr_tce_unset_window+0xbc/0x510 (unreliable)
tce_iommu_attach_group+0x24c/0x340 [vfio_iommu_spapr_tce]
vfio_container_attach_group+0xec/0x240 [vfio]
vfio_group_fops_unl_ioctl+0x548/0xb00 [vfio]
sys_ioctl+0x754/0x1580
system_call_exception+0x13c/0x330
system_call_vectored_common+0x15c/0x2ec
<snip>
--- interrupt: 3000
Fix this by having null check for the tbl passed to the
spapr_tce_unset_window().
Fixes: f431a8cde7 ("powerpc/iommu: Reimplement the iommu_table_group_ops for pSeries")
Cc: stable@vger.kernel.org
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/173674009556.1559.12487885286848752833.stgit@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1378ffec30 upstream.
The proble is on the first line:
if (jpeg->pd_dev[i] && !pm_runtime_suspended(jpeg->pd_dev[i]))
If jpeg->pd_dev[i] is an error pointer, then passing it to
pm_runtime_suspended() will lead to an Oops. The other conditions
check for both error pointers and NULL, but it would be more clear to
use the IS_ERR_OR_NULL() check for that.
Fixes: fd0af4cd35 ("media: imx-jpeg: Ensure power suppliers be suspended before detach them")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c79a39dc8d upstream.
On a board running ntpd and gpsd, I'm seeing a consistent use-after-free
in sys_exit() from gpsd when rebooting:
pps pps1: removed
------------[ cut here ]------------
kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150
CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1
Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kobject_put+0x120/0x150
lr : kobject_put+0x120/0x150
sp : ffffffc0803d3ae0
x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001
x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440
x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600
x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20
x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
kobject_put+0x120/0x150
cdev_put+0x20/0x3c
__fput+0x2c4/0x2d8
____fput+0x1c/0x38
task_work_run+0x70/0xfc
do_exit+0x2a0/0x924
do_group_exit+0x34/0x90
get_signal+0x7fc/0x8c0
do_signal+0x128/0x13b4
do_notify_resume+0xdc/0x160
el0_svc+0xd4/0xf8
el0t_64_sync_handler+0x140/0x14c
el0t_64_sync+0x190/0x194
---[ end trace 0000000000000000 ]---
...followed by more symptoms of corruption, with similar stacks:
refcount_t: underflow; use-after-free.
kernel BUG at lib/list_debug.c:62!
Kernel panic - not syncing: Oops - BUG: Fatal exception
This happens because pps_device_destruct() frees the pps_device with the
embedded cdev immediately after calling cdev_del(), but, as the comment
above cdev_del() notes, fops for previously opened cdevs are still
callable even after cdev_del() returns. I think this bug has always
been there: I can't explain why it suddenly started happening every time
I reboot this particular board.
In commit d953e0e837 ("pps: Fix a use-after free bug when
unregistering a source."), George Spelvin suggested removing the
embedded cdev. That seems like the simplest way to fix this, so I've
implemented his suggestion, using __register_chrdev() with pps_idr
becoming the source of truth for which minor corresponds to which
device.
But now that pps_idr defines userspace visibility instead of cdev_add(),
we need to be sure the pps->dev refcount can't reach zero while
userspace can still find it again. So, the idr_remove() call moves to
pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev.
pps_core: source serial1 got cdev (251:1)
<...>
pps pps1: removed
pps_core: unregistering pps1
pps_core: deallocating pps1
Fixes: d953e0e837 ("pps: Fix a use-after free bug when unregistering a source.")
Cc: stable@vger.kernel.org
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/a17975fd5ae99385791929e563f72564edbcf28f.1731383727.git.calvin@wbinvd.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6ef3a7fa9 upstream.
If the uvc_status_init() function fails to allocate the int_urb, it will
free the dev->status pointer but doesn't reset the pointer to NULL. This
results in the kfree() call in uvc_status_cleanup() trying to
double-free the memory. Fix it by resetting the dev->status pointer to
NULL after freeing it.
Fixes: a31a405547 ("V4L/DVB:usbvideo:don't use part of buffer for USB transfer #4")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241107235130.31372-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7378aeb664 upstream.
In the rproc_alloc() function, on error, put_device(&rproc->dev) is
called, leading to the call of the rproc_type_release() function.
An error can occurs before ida_alloc is called.
In such case in rproc_type_release(), the condition (rproc->index >= 0) is
true as rproc->index has been initialized to 0.
ida_free() is called reporting a warning:
[ 4.181906] WARNING: CPU: 1 PID: 24 at lib/idr.c:525 ida_free+0x100/0x164
[ 4.186378] stm32-display-dsi 5a000000.dsi: Fixed dependency cycle(s) with /soc/dsi@5a000000/panel@0
[ 4.188854] ida_free called for id=0 which is not allocated.
[ 4.198256] mipi-dsi 5a000000.dsi.0: Fixed dependency cycle(s) with /soc/dsi@5a000000
[ 4.203556] Modules linked in: panel_orisetech_otm8009a dw_mipi_dsi_stm(+) gpu_sched dw_mipi_dsi stm32_rproc stm32_crc32 stm32_ipcc(+) optee(+)
[ 4.224307] CPU: 1 UID: 0 PID: 24 Comm: kworker/u10:0 Not tainted 6.12.0 #442
[ 4.231481] Hardware name: STM32 (Device Tree Support)
[ 4.236627] Workqueue: events_unbound deferred_probe_work_func
[ 4.242504] Call trace:
[ 4.242522] unwind_backtrace from show_stack+0x10/0x14
[ 4.250218] show_stack from dump_stack_lvl+0x50/0x64
[ 4.255274] dump_stack_lvl from __warn+0x80/0x12c
[ 4.260134] __warn from warn_slowpath_fmt+0x114/0x188
[ 4.265199] warn_slowpath_fmt from ida_free+0x100/0x164
[ 4.270565] ida_free from rproc_type_release+0x38/0x60
[ 4.275832] rproc_type_release from device_release+0x30/0xa0
[ 4.281601] device_release from kobject_put+0xc4/0x294
[ 4.286762] kobject_put from rproc_alloc.part.0+0x208/0x28c
[ 4.292430] rproc_alloc.part.0 from devm_rproc_alloc+0x80/0xc4
[ 4.298393] devm_rproc_alloc from stm32_rproc_probe+0xd0/0x844 [stm32_rproc]
[ 4.305575] stm32_rproc_probe [stm32_rproc] from platform_probe+0x5c/0xbc
Calling ida_alloc earlier in rproc_alloc ensures that the rproc->index is
properly set.
Fixes: 08333b911f ("remoteproc: Directly use ida_alloc()/free()")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241122175127.2188037-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e598d8981f upstream.
The Fixes commit mentioned this:
> An MPTCP firewall blackhole can be detected if the following SYN
> retransmission after a fallback to "plain" TCP is accepted.
But in fact, this blackhole was detected if any following SYN
retransmissions after a fallback to TCP was accepted.
That's because 'mptcp_subflow_early_fallback()' will set 'request_mptcp'
to 0, and 'mpc_drop' will never be reset to 0 after.
This is an issue, because some not so unusual situations might cause the
kernel to detect a false-positive blackhole, e.g. a client trying to
connect to a server while the network is not ready yet, causing a few
SYN retransmissions, before reaching the end server.
Fixes: 27069e7cb3 ("mptcp: disable active MPTCP in case of blackhole")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ausef Yousof
Dmitry Baryshkov
Zhi Wang
Dustin L. Howett
Thomas Weißschuh
Dongwon Kim
Yazen Ghannam
Carlos Llamas
Thorsten Blum
Peter Zijlstra
Suleiman Souhlal
Josef Bacik
Hao-ran Zheng
Sven Schnelle
Kees Cook
Anshuman Khandual
Filipe Manana
Qu Wenruo
Geert Uytterhoeven
Greg Kroah-Hartman
Jakub Kicinski
Tiezhu Yang
Chen Ridong
Sean Christopherson
Aric Cyr
Nathan Chancellor
Claudiu Beznea
Leon Hwang
Vasily Gorbik
Gal Pressman
Steffen Klassert
Everest K.C
Zijun Hu
Yu Kuai
Shivaprasad G Bhat
Dan Carpenter
Laurentiu Palcu
Thinh Nguyen
Calvin Owens
Laurent Pinchart
Arnaud Pouliquen
Patrisious Haddad
Matthieu Baerts (NGI0)