Commit graph

1,058,063 commits

Author SHA1 Message Date
Steve French
456af438ad
Merge pull request #64 from namjaejeon/cifsd-for-next
ksmbd-fixes
2021-08-01 18:46:26 -05:00
Linus Walleij
fe2fc0fd37 ARM: dts: ux500: Adjust operating points to reality
The operating points should correspond to the actual frequencies
supported for the CPU. Other patches have fixed so these are
rounded and reported properly, this fixes the device trees to
match.

The Codina variant has a lower frequency than other devices so
indicate this in the device tree.

Cc: phone-devel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-02 01:41:59 +02:00
Dan Carpenter
8b99f3504b ksmbd: fix an oops in error handling in smb2_open()
If smb2_get_name() then name is an error pointer.  In the clean up
code, we try to kfree() it and that will lead to an Oops.  Set it to
NULL instead.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-08-02 08:17:25 +09:00
Avri Altman
f95f59a2bb scsi: ufs: ufshpb: Make host mode parameters configurable
Elaborate some more on the host control mode logic parameters, explaining
what they do and how to configure them.

Link: https://lore.kernel.org/r/20210712095039.8093-13-avri.altman@wdc.com
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:05:15 -04:00
Avri Altman
5dea655a09 scsi: ufs: ufshpb: Add support for host control mode
Support devices that report they are using host control mode.

Link: https://lore.kernel.org/r/20210712095039.8093-12-avri.altman@wdc.com
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:05:15 -04:00
Avri Altman
1afb7ddadc scsi: ufs: ufshpb: Do not send umap_all in host control mode
HPB WRITE BUFFER with buffer-id = 0x3h is supported in device control mode
only.

Link: https://lore.kernel.org/r/20210712095039.8093-11-avri.altman@wdc.com
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:05:15 -04:00
Avri Altman
33845a2d84 scsi: ufs: ufshpb: Limit the number of in-flight map requests
In host control mode the host is the originator of map requests. To not
flood the device with map requests, use a simple throttling mechanism that
limits the number of in-flight map requests.

Link: https://lore.kernel.org/r/20210712095039.8093-10-avri.altman@wdc.com
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:05:15 -04:00
Avri Altman
13c044e916 scsi: ufs: ufshpb: Add "cold" regions timer
In order not to hang on to "cold" regions, we inactivate a region that has
had no READ access for a predefined amount of time - READ_TO_MS. For that
purpose monitor the active regions list, polling it on every
POLLING_INTERVAL_MS. On timeout expiry add the region to the
"to-be-inactivated" list unless it is clean and did not exhaust its
READ_TO_EXPIRIES - another parameter.

None of this applies to pinned regions.

Link: https://lore.kernel.org/r/20210712095039.8093-9-avri.altman@wdc.com
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:05:15 -04:00
Avri Altman
67001ff171 scsi: ufs: ufshpb: Add HPB dev reset response
The spec does not define what the host's recommended response is when the
device sends HPB dev reset response (oper 0x2).

Update all active HPB regions.

Link: https://lore.kernel.org/r/20210712095039.8093-8-avri.altman@wdc.com
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:05:15 -04:00
Avri Altman
6f4ad14f0f scsi: ufs: ufshpb: Region inactivation in host mode
In host mode, the host is expected to send HPB WRITE BUFFER with buffer-id
= 0x1 when it inactivates a region.

Use the map-requests pool as there is no point in assigning a designated
cache for umap-requests.

[mkp: REQ_OP_DRV_*]

Link: https://lore.kernel.org/r/20210712095039.8093-7-avri.altman@wdc.com
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:05:14 -04:00
Avri Altman
6c59cb501b scsi: ufs: ufshpb: Make eviction depend on region's reads
In host mode, eviction is considered an extreme measure. Verify that the
entering region has enough reads, and the exiting region has fewer reads.

Link: https://lore.kernel.org/r/20210712095039.8093-6-avri.altman@wdc.com
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:05:14 -04:00
Avri Altman
c76a188856 scsi: ufs: ufshpb: Add reads counter
In host control mode, reads are the major source of activation trials.
Keep track of those reads counters, for both active as well inactive
regions.

We reset the read counter upon write - we are only interested in "clean"
reads.

Keep those counters normalized, as we are using those reads as a
comparative score, to make various decisions.  If during consecutive
normalizations an active region has exhaust its reads - inactivate it.

While at it, protect the {active,inactive}_count stats by adding them into
the applicable handler.

Link: https://lore.kernel.org/r/20210712095039.8093-5-avri.altman@wdc.com
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:05:14 -04:00
Avri Altman
8becf4db1e scsi: ufs: ufshpb: Transform set_dirty to iterate_rgn
Given a transfer length, set_dirty meticulously iterates over all the
entries, across subregions and regions if needed. Currently its only use is
to mark dirty blocks, but HCM may benefit from it as well to manage its
read counters.

Link: https://lore.kernel.org/r/20210712095039.8093-4-avri.altman@wdc.com
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:05:14 -04:00
Avri Altman
3a2c1f6803 scsi: ufs: ufshpb: Add host control mode support to rsp_upiu
In device control mode, the device may recommend the host to either
activate or inactivate a region, and the host should follow. Meaning those
are not actually recommendations, but more of instructions.

Conversely, in host control mode, the recommendation protocol is slightly
changed:

 a) The device may only recommend the host to update a subregion of an
    already-active region. And,

 b) The device may *not* recommend to inactivate a region.

Furthermore, in host control mode, the host may choose not to follow any of
the device's recommendations. However, in case of a recommendation to
update an active and clean subregion, it is better to follow those
recommendation because otherwise the host has no other way to know that
some internal relocation took place.

Link: https://lore.kernel.org/r/20210712095039.8093-3-avri.altman@wdc.com
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:05:14 -04:00
Avri Altman
119ee38c10 scsi: ufs: ufshpb: Cache HPB Control mode on init
We will use control_mode later when we need to differentiate between device
and host control modes.

Link: https://lore.kernel.org/r/20210712095039.8093-2-avri.altman@wdc.com
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:05:14 -04:00
Daejun Park
41d8a9333c scsi: ufs: ufshpb: Add HPB 2.0 support
Version 2.0 of HBP supports reads of varying sizes from 4KB to 1MB.

A read operation <= 32KB is supported as single HPB read. A read between
36KB and 1MB is supported by a combination of write buffer command and HPB
read command to deliver more PPN. The write buffer commands may not be
issued immediately due to busy tags. To use HPB read more aggressively, the
driver can requeue the write buffer command. The requeue threshold is
implemented as timeout and can be modified with requeue_timeout_ms entry in
sysfs.

[mkp: REQ_OP_DRV_* and blk_rq_is_passthrough()]

Link: https://lore.kernel.org/r/20210712090025epcms2p3b3d94f6f1b2cfa394e3d9ba130ca0fa7@epcms2p3
Tested-by: Can Guo <cang@codeaurora.org>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:05:07 -04:00
Daejun Park
2fff76f875 scsi: ufs: ufshpb: Prepare HPB read for cached sub-region
If the logical address of a read I/O belongs to an active sub-region, the
HPB driver modifies the read I/O command to an HPB read. The driver
modifies the UFS UPIU instead of modifying the existing SCSI command.

In HPB version 1.0, the maximum read I/O size that can be converted to HPB
read is 4KB.

The dirty map of the active sub-region prevents an incorrect HPB read that
has stale physical page number which is updated by previous write I/O.

[mkp: REQ_OP_DRV_* and blk_rq_is_passthrough()]

Link: https://lore.kernel.org/r/20210712085936epcms2p4b0ec5c8cecdeea6cc043d684363842b6@epcms2p4
Tested-by: Bean Huo <beanhuo@micron.com>
Tested-by: Can Guo <cang@codeaurora.org>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:04:55 -04:00
Daejun Park
4b5f49079c scsi: ufs: ufshpb: L2P map management for HPB read
Implement L2P map management in HPB.

The HPB divides logical addresses into several regions. A region consists
of several sub-regions. The sub-region is a basic unit where L2P mapping is
managed. The driver loads L2P mapping data of each sub-region. The loaded
sub-region is called active-state. The HPB driver unloads L2P mapping data
as region unit. The unloaded region is called inactive-state.

Sub-region/region candidates to be loaded and unloaded are delivered from
the UFS device. The UFS device delivers the recommended active sub-region
and inactivate region to the driver using sense data. The HPB module
performs L2P mapping management on the host through the delivered
information.

A pinned region is a preset region on the UFS device that is always
in activate-state.

The data structures for map data requests and L2P mappings use the mempool
API, minimizing allocation overhead while avoiding static allocation.

The mininum size of the memory pool used in the HPB is implemented
as a module parameter so that it can be configurable by the user.

To guarantee a minimum memory pool size of 4MB: ufshpb_host_map_kbytes=4096.

The map_work manages active/inactive via 2 "to-do" lists:

 - hpb->lh_inact_rgn: regions to be inactivated
 - hpb->lh_act_srgn: subregions to be activated

These lists are maintained on I/O completion.

[mkp: switch to REQ_OP_DRV_*]

Link: https://lore.kernel.org/r/20210712085859epcms2p36e420f19564f6cd0c4a45d54949619eb@epcms2p3
Tested-by: Bean Huo <beanhuo@micron.com>
Tested-by: Can Guo <cang@codeaurora.org>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:04:41 -04:00
Daejun Park
f02bc9754a scsi: ufs: ufshpb: Introduce Host Performance Buffer feature
Implement Host Performance Buffer (HPB) initialization and add function
calls to UFS core driver.

NAND flash-based storage devices, including UFS, have mechanisms to
translate logical addresses of I/O requests to the corresponding physical
addresses of the flash storage.  In UFS, logical-to-physical-address (L2P)
map data, which is required to identify the physical address for the
requested I/Os, can only be partially stored in SRAM from NAND flash. Due
to this partial loading, accessing the flash address area, where the L2P
information for that address is not loaded in the SRAM, can result in
serious performance degradation.

The basic concept of HPB is to cache L2P mapping entries in host system
memory so that both physical block address (PBA) and logical block address
(LBA) can be delivered in HPB read command. The HPB read command allows to
read data faster than a regular read command in UFS since it provides the
physical address (HPB Entry) of the desired logical block in addition to
its logical address. The UFS device can access the physical block in NAND
directly without searching and uploading L2P mapping table. This improves
read performance because the NAND read operation for uploading L2P mapping
table is removed.

In HPB initialization, the host checks if the UFS device supports HPB
feature and retrieves related device capabilities. Then, HPB parameters are
configured in the device.

Total start-up time of popular applications was measured and the difference
observed between HPB being enabled and disabled. Popular applications are
12 game apps and 24 non-game apps. Each test cycle consists of running 36
applications in sequence. We repeated the cycle for observing performance
improvement by L2P mapping cache hit in HPB.

The following is the test environment:

 - kernel version: 4.4.0
 - RAM: 8GB
 - UFS 2.1 (64GB)

Results:

   +-------+----------+----------+-------+
   | cycle | baseline | with HPB | diff  |
   +-------+----------+----------+-------+
   | 1     | 272.4    | 264.9    | -7.5  |
   | 2     | 250.4    | 248.2    | -2.2  |
   | 3     | 226.2    | 215.6    | -10.6 |
   | 4     | 230.6    | 214.8    | -15.8 |
   | 5     | 232.0    | 218.1    | -13.9 |
   | 6     | 231.9    | 212.6    | -19.3 |
   +-------+----------+----------+-------+

We also measured HPB performance using iozone:

   $ iozone -r 4k -+n -i2 -ecI -t 16 -l 16 -u 16 -s $IO_RANGE/16 -F \
   mnt/tmp_1 mnt/tmp_2 mnt/tmp_3 mnt/tmp_4 mnt/tmp_5 mnt/tmp_6 mnt/tmp_7 \
   mnt/tmp_8 mnt/tmp_9 mnt/tmp_10 mnt/tmp_11 mnt/tmp_12 mnt/tmp_13 \
   mnt/tmp_14 mnt/tmp_15 mnt/tmp_16

Results:

   +----------+--------+---------+
   | IO range | HPB on | HPB off |
   +----------+--------+---------+
   |   1 GB   | 294.8  | 300.87  |
   |   4 GB   | 293.51 | 179.35  |
   |   8 GB   | 294.85 | 162.52  |
   |  16 GB   | 293.45 | 156.26  |
   |  32 GB   | 277.4  | 153.25  |
   +----------+--------+---------+

Link: https://lore.kernel.org/r/20210712085830epcms2p8c1288b7f7a81b044158a18232617b572@epcms2p8
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Tested-by: Can Guo <cang@codeaurora.org>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 16:04:23 -04:00
Linus Torvalds
d4affd6b6e perf tools fixes for v5.14: 2nd batch
- Revert "perf map: Fix dso->nsinfo refcounting", this makes 'perf top' to
   abort, uncovering a design flaw on how namespace information is kept, the
   fix is more than we can do right now, leave it for the next merge window.
 
 - Split --dump-raw-trace by AUX records for ARM's CoreSight, fixing up the
   decoding of some records.
 
 - Fix PMU alias matching.
 
 Thanks to James Clark and John Garry for these fixes.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYQaw5wAKCRCyPKLppCJ+
 J0n2AP42gFxTmz5YDv1YUjaC8GPMsqp0kNYo67zq0x4QMbp7pAEAt2S5Z7kbcK9h
 m57dq2wTz/lWCLCS0ccrhS+b7mjYlwk=
 =zRFX
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-fixes-for-v5.14-2021-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Revert "perf map: Fix dso->nsinfo refcounting", this makes 'perf top'
   abort, uncovering a design flaw on how namespace information is kept.
   The fix for that is more than we can do right now, leave it for the
   next merge window.

 - Split --dump-raw-trace by AUX records for ARM's CoreSight, fixing up
   the decoding of some records.

 - Fix PMU alias matching.

Thanks to James Clark and John Garry for these fixes.

* tag 'perf-tools-fixes-for-v5.14-2021-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  Revert "perf map: Fix dso->nsinfo refcounting"
  perf pmu: Fix alias matching
  perf cs-etm: Split --dump-raw-trace by AUX records
2021-08-01 12:25:30 -07:00
Linus Torvalds
c82357a7b3 powerpc fixes for 5.14 #4
- Don't use r30 in VDSO code, to avoid breaking existing Go lang programs.
 
  - Change an export symbol to allow non-GPL modules to use spinlocks again.
 
 Thanks to: Paul Menzel, Srikar Dronamraju.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmEGnMETHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgPzxD/9HXKi1gyaxgGEVsJKAWzhVYajsOn3g
 7QnihBnyZFWNPWgyaoRnb06xg3/uVCnXtnnXARgzQ0E0nGlywVLvEscpvSqB+kn1
 VKlPGWN6f/MmN2WTXQlT1/qLQUvdyiniieqg9BecxE8G4CfKRi3jw5Q8bMTIh2Lq
 Oh1XzUXD6P+/Wv3Sfx0goJ9+SU7uxJRW8dgpzseBy3NnK9HAoRaIf1V8N2fsgyil
 IgMlpi249Q2uFAewrh2PcYrAeATFXwIaZ1n+VHck299M0oQzyq1dttyjspihyOUB
 JhrYZtU5aWp1NrBNBwIJ0YpUHw8Jdsr6kPl0SpY8yHORBeAssuQOE/v0qR9pypsT
 DHBNMAniudTO6TJGDRvxN58y0BXzvnk5m+mBbUuhXeBLdcKFlpN7M4nXSdAh60JZ
 Uw107OY5/NoFpXuhDX1B46E0OuQFtwcVSW93kmEUR6KDX+MbIlKfQbNan7VqpEbG
 IFJCNcawBV9I7WeX8+ijFM5SvglC8gYnp5A7hNt/7ptOZjG5Nm6J8k+EDUIlgbiO
 BFJJRSfkVWFi+NUadSMyX4rWxSykpNsovZzAvodz+Evy1LgSSe71vbcbETtHYpxF
 +kGISw+EtCqgJ4qPI9k71oxO/edoMpuMhtgINPrxXtPywbG6Kj8RDrjWHrhJRSzo
 kT1ybTi4P7uDBw==
 =yBq0
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Don't use r30 in VDSO code, to avoid breaking existing Go lang
   programs.

 - Change an export symbol to allow non-GPL modules to use spinlocks
   again.

Thanks to Paul Menzel, and Srikar Dronamraju.

* tag 'powerpc-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/vdso: Don't use r30 to avoid breaking Go lang
  powerpc/pseries: Fix regression while building external modules
2021-08-01 12:18:44 -07:00
Linus Torvalds
aa6603266c Fixes for 5.14-rc4:
* Fix a number of coordination bugs relating to cache flushes for
    metadata writeback, cache flushes for multi-buffer log writes, and
    FUA writes for single-buffer log writes.
  * Fix a bug with incorrect replay of attr3 blocks.
  * Fix unnecessary stalls when flushing logs to disk.
  * Fix spoofing problems when recovering realtime bitmap blocks.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmEC2PgACgkQ+H93GTRK
 tOtEvg//XQTcqKgO+60lJzhfgfGD8HsYWGcAc0UW8vu0I6gPNstd/PHKBCYkhT66
 rp0l8CtZhbo3qj2ZJTIDvVxFeeAUcMhAIgU4gJB6OmW6/VV8NJlArfeyaA+85/lV
 lVYD53qBcc0IydDWlRD5oU8T55pqv9hg0W9WkpWrtjxoTlxPX5rDj7yrKEqiQs1M
 IUa5X4Qnwo/C2ATD/t2G3PIM7OxdCJ7YjyrZ27VWWRsUJW8DOqXtJX6HBs+VT9cM
 mh/IeIy60rmKgf2Ag2ZJCvrKnmqXqJFyGjEDzk6gXoqktQyWnUBLhQoyLh5r9UlA
 4ThLGvPwUh5QEFOoo3cpN72X0wUeHcebfh4DgY/G3PeEK4J1CVq1UXLB1a8Si7X4
 qf5ZqfUU4dr6v8C2AIqd9S/H6wm8v84hzA2uXca9tsw67rAcLc6N0rHydlLtn+n8
 DL4PQYcUmn0LGrhIi2t/4ec80SGBf7ad/iDbr3A0K5NsV5kMl8dReg2yCDl9kHM0
 yHFk8zLTKh5fs7fmmJXOORP33YMzstET9L1oKBv9cd9iMlHNUn27o9tpwwa2noM+
 v6E+UCKlRTauj/MTxZITdmNzgGEymgu5bpbb77N24OTF9jf48OEW+cr0ZzgrVYtk
 wGuj9RFGcwneJoWjVPGURu1xBuC1AX9PbqnR9NQXbqmuwd6BINk=
 =pLW3
 -----END PGP SIGNATURE-----

Merge tag 'xfs-5.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
 "This contains a bunch of bug fixes in XFS.

  Dave and I have been busy the last couple of weeks to find and fix as
  many log recovery bugs as we can find; here are the results so far. Go
  fstests -g recoveryloop! ;)

   - Fix a number of coordination bugs relating to cache flushes for
     metadata writeback, cache flushes for multi-buffer log writes, and
     FUA writes for single-buffer log writes

   - Fix a bug with incorrect replay of attr3 blocks

   - Fix unnecessary stalls when flushing logs to disk

   - Fix spoofing problems when recovering realtime bitmap blocks"

* tag 'xfs-5.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: prevent spoofing of rtbitmap blocks when recovering buffers
  xfs: limit iclog tail updates
  xfs: need to see iclog flags in tracing
  xfs: Enforce attr3 buffer recovery order
  xfs: logging the on disk inode LSN can make it go backwards
  xfs: avoid unnecessary waits in xfs_log_force_lsn()
  xfs: log forces imply data device cache flushes
  xfs: factor out forced iclog flushes
  xfs: fix ordering violation between cache flushes and tail updates
  xfs: fold __xlog_state_release_iclog into xlog_state_release_iclog
  xfs: external logs need to flush data device
  xfs: flush data dev on external log write
2021-08-01 12:07:23 -07:00
Dwaipayan Ray
3352901829 scsi: qla4xxx: Convert uses of __constant_cpu_to_<foo> to cpu_to_<foo>
The macros cpu_to_le16() and cpu_to_le32() have special cases for
constants.  Their __constant_<foo> versions are not required.

On little endian systems, both cpu_to_le16() and __constant_cpu_to_le16()
expand to the same expression. Same is the case with cpu_to_le32().

On big endian systems, cpu_to_le16() expands to __swab16() which has a
__builtin_constant_p check. Similarly, cpu_to_le32() expands to __swab32().

Consequently these macros can be safely used with constants, and hence all
those uses are converted. This was discovered as a part of a checkpatch
evaluation, looking at all reports of WARNING:CONSTANT_CONVERSION error
type.

Link: https://lore.kernel.org/r/20210716112852.24598-1-dwaipayanray1@gmail.com
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 13:39:17 -04:00
Colin Ian King
2127cd21fb scsi: BusLogic: Use %X for u32 sized integer rather than %lX
An earlier fix changed the print format specifier for adapter->bios_addr to
use %lX. However, the integer is a u32 so the fix was wrong. Fix this by
using the correct %X format specifier.

Link: https://lore.kernel.org/r/20210730095031.26981-1-colin.king@canonical.com
Fixes: 4362269711 ("scsi: BusLogic: use %lX for unsigned long rather than %X")
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Invalid type in argument")
2021-08-01 13:27:46 -04:00
Maciej W. Rozycki
a40662c90d scsi: BusLogic: Avoid unbounded vsprintf() use
Existing blogic_msg() invocations do not appear to overrun its internal
buffer of a fixed length of 100, which would cause stack corruption, but
it's easy to miss with possible further updates and a fix is cheap in
performance terms, so limit the output produced into the buffer by using
vscnprintf() rather than vsprintf().

Link: https://lore.kernel.org/r/alpine.DEB.2.21.2104201939390.44318@angie.orcam.me.uk
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 13:26:38 -04:00
Maciej W. Rozycki
44d01fc86d scsi: BusLogic: Fix missing pr_cont() use
Update BusLogic driver's messaging system to use pr_cont() for continuation
lines, bringing messy output:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 19, Address:
0xE0012000,
Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth:
Automatic
, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Enabled
, SCAM: Disabled

scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958

back to order:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 19, Address: 0xE0012000, Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Enabled, SCAM: Disabled
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958

Also diagnostic output such as with the BusLogic=TraceConfiguration
parameter is affected and becomes vertical and therefore hard to read.
This has now been corrected, e.g.:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
blogic_cmd(86) Status = 30:  4 ==>  4: FF 05 93 00
blogic_cmd(95) Status = 28: (Modify I/O Address)
blogic_cmd(91) Status = 30:  1 ==>  1: 01
blogic_cmd(04) Status = 30:  4 ==>  4: 41 41 35 30
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
blogic_cmd(04) Status = 30:  4 ==>  4: 41 41 35 30
blogic_cmd(0B) Status = 30:  3 ==>  3: 00 08 07
blogic_cmd(0D) Status = 30: 34 ==> 34: 03 01 07 04 00 00 00 00 00 00 00 00 00 00 00 00 FF 42 44 46 FF 00 00 00 00 00 00 00 00 00 FF 00 FF 00
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
blogic_cmd(84) Status = 30:  1 ==>  1: 37
blogic_cmd(8B) Status = 30:  5 ==>  5: 39 35 38 20 20
blogic_cmd(85) Status = 30:  1 ==>  1: 42
blogic_cmd(86) Status = 30:  4 ==>  4: FF 05 93 00
blogic_cmd(91) Status = 30: 64 ==> 64: 41 46 3E 20 39 35 38 20 20 00 C4 00 04 01 07 2F 07 04 35 FF FF FF FF FF FF FF FF FF FF 01 00 FE FF 08 FF FF 00 00 00 00 00 00 00 01 00 01 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 FC
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter

etc.

Link: https://lore.kernel.org/r/alpine.DEB.2.21.2104201940430.44318@angie.orcam.me.uk
Fixes: 4bcc595ccd ("printk: reinstate KERN_CONT for printing continuation lines")
Cc: stable@vger.kernel.org # v4.9+
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 13:26:38 -04:00
Christoph Hellwig
659a37844a scsi: bsg-lib: Fix commands without data transfer in bsg_transport_sg_io_fn()
Set ret to 0 after the initial permission checks to avoid leaking -EPERM
for commands without data transfer.

Link: https://lore.kernel.org/r/20210731074027.1185545-3-hch@lst.de
Fixes: 75ca56409e ("scsi: bsg: Move the whole request execution into the SCSI/transport handlers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 13:21:40 -04:00
Christoph Hellwig
5c0f61377b scsi: bsg: Fix commands without data transfer in scsi_bsg_sg_io_fn()
Set ret to 0 after the initial permission checks to avoid leaking -EPERM
for commands without data transfer.

Link: https://lore.kernel.org/r/20210731074027.1185545-2-hch@lst.de
Fixes: 75ca56409e ("scsi: bsg: Move the whole request execution into the SCSI/transport handlers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-01 13:21:40 -04:00
dingsenjie
18cb62367a libertas: Remove unnecessary label of lbs_ethtool_get_eeprom
The label is only used once, so we delete it and use the
return statement instead of the goto statement.

Signed-off-by: dingsenjie <dingsenjie@yulong.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210625121108.162868-1-dingsenjie@163.com
2021-08-01 13:28:55 +03:00
Linus Walleij
5ff013914c brcmfmac: firmware: Allow per-board firmware binaries
After some crashes in the 3D engine (!) on the Samsung GT-I8530
it turns out that the main firmware file can be device dependent,
something that was previously only handled for the NVRAM
parameter file.

Rewrite the code a bit so we can a per-board suffixed firmware
binary as well, if this does not exist we fall back to the
canonical firmware name.

Example: a 4330 device with the OF board compatible is
"samsung,gavini". We will first try
"brcmfmac4330-sdio.samsung,gavini.bin" then "brcmfmac4330-sdio.bin"
if that does not work.

Cc: phone-devel@vger.kernel.org
Cc: newbyte@disroot.org
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210711231659.255479-1-linus.walleij@linaro.org
2021-08-01 13:26:59 +03:00
Gregory Williams
6c9bd4432b DRM: ast: Fixed coding style issues of ast_mode.c
Removed space before comma, fixed if statements by putting trailing
statements on new line, fixed unsigned int declaration, and removed
not needed else statement after return.

Signed-off-by: Gregory Williams <gregwills85@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210731005328.GA19016@devbox
2021-08-01 12:12:36 +02:00
Florian Westphal
f2e3778db7 netfilter: remove xt pernet data
clusterip is now handled via net_generic.

NOTRACK is tiny compared to rest of xt_CT feature set, even the existing
deprecation warning is bigger than the actual functionality.

Just remove the warning, its not worth keeping/adding a net_generic one.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-01 12:00:51 +02:00
Florian Westphal
ded2d10e9a netfilter: ipt_CLUSTERIP: use clusterip_net to store pernet warning
No need to use struct net for this.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-01 12:00:50 +02:00
Florian Westphal
7c1829b6aa netfilter: ipt_CLUSTERIP: only add arp mangle hook when required
Do not register the arp mangling hooks from pernet init path.

As-is, load of the module is enough for these hooks to become active
in each net namespace.

Use checkentry instead so hook is only added if a CLUSTERIP rule is used.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-01 12:00:50 +02:00
Pablo Neira Ayuso
92fb15513e netfilter: flowtable: remove nf_ct_l4proto_find() call
TCP and UDP are built-in conntrack protocol trackers and the flowtable
only supports for TCP and UDP, remove this call.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-01 12:00:50 +02:00
Pablo Neira Ayuso
241d1af4c1 netfilter: nft_compat: use nfnetlink_unicast()
Use nfnetlink_unicast() which already translates EAGAIN to ENOBUFS,
since EAGAIN is reserved to report missing module dependencies to the
nfnetlink core.

e0241ae6ac ("netfilter: use nfnetlink_unicast() forgot to update
this spot.

Reported-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-01 12:00:49 +02:00
Alexander Usyskin
0fc7ca624b samples: mei: don't wait on read completion upon write.
The original mei driver communication was strictly write command and
receive response flow, the completion of write was determined when
response was ready using select(). This paradigm is a long time not
true.  There can be write without a response and an unsolicited read.
The driver is capable of handling those.
Adjust also the sample code and remove select() on read() from the
write flow. Add select to the read flow to showcase how to do the
read with a timeout.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210801072532.8668-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-01 09:54:22 +02:00
Phillip Potter
c66cd19e2b staging: r8188eu: remove RT_PRINT_DATA macro
Remove RT_PRINT_DATA definition from include/rtw_debug.h, and its
two calling statements in hal/hal_com.c, as this code was not written
with best practices in mind and is safer to simply remove.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731235648.67642-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-01 08:11:00 +02:00
Phillip Potter
55dfa29b43 staging: rtl8188eu: remove rtl8188eu driver from staging dir
This driver was deprecated with the introduction of the r8188eu driver,
based upon Realtek sources that were modified for CFG80211 support and
other fixes on GitHub by Larry Finger. As that driver is now progressing
at pace, we should remove this one.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731133809.196681-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-01 08:10:42 +02:00
Phillip Potter
06889446a7 staging: r8188eu: correct set/defined but unused warnings from debug cleanup
The recent include/odm_debug.h removal series caused a few kernel test
robot warnings. This patch fixes them as well as an existing warning
related to an array within include/rtw_security.h not being used.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731133804.196631-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-01 08:10:05 +02:00
kernel test robot
afc56237fd staging: r8188eu: fix duplicated inclusion
Generated by: scripts/checkincludes.pl

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210731121843.GA54722@fdce12c5ae77
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-01 08:09:46 +02:00
Alistair Francis
9746f5fe70 drm/panel: Add support for E Ink VB3300-KCA
Add support for the 10.3" E Ink panel described at:
https://www.eink.com/product.html?type=productdetail&id=7

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210801004701.831-1-alistair@alistair23.me
2021-08-01 07:46:00 +02:00
Will Deacon
a449ffaf91 powerpc/svm: Don't issue ultracalls if !mem_encrypt_active()
Commit ad6c002831 ("swiotlb: Free tbl memory in swiotlb_exit()")
introduced a set_memory_encrypted() call to swiotlb_exit() so that the
buffer pages are returned to an encrypted state prior to being freed.

Sachin reports that this leads to the following crash on a Power server:

[    0.010799] software IO TLB: tearing down default memory pool
[    0.010805] ------------[ cut here ]------------
[    0.010808] kernel BUG at arch/powerpc/kernel/interrupt.c:98!

Nick spotted that this is because set_memory_encrypted() is issuing an
ultracall which doesn't exist for the processor, and should therefore
be gated by mem_encrypt_active() to mirror the x86 implementation.

Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Claire Chang <tientzu@chromium.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: ad6c002831 ("swiotlb: Free tbl memory in swiotlb_exit()")
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/1905CD70-7656-42AE-99E2-A31FC3812EAC@linux.vnet.ibm.com/
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2021-07-31 22:28:39 -04:00
Maurizio Lombardi
342f43af70 iscsi_ibft: fix crash due to KASLR physical memory remapping
Starting with commit a799c2bd29
("x86/setup: Consolidate early memory reservations")
memory reservations have been moved earlier during the boot process,
before the execution of the Kernel Address Space Layout Randomization code.

setup_arch() calls the iscsi_ibft's find_ibft_region() function
to find and reserve the memory dedicated to the iBFT and this function
also saves a virtual pointer to the iBFT table for later use.

The problem is that if KALSR is active, the physical memory gets
remapped somewhere else in the virtual address space and the pointer is
no longer valid, this will cause a kernel panic when the iscsi driver tries
to dereference it.

 iBFT detected.
 BUG: unable to handle page fault for address: ffff888000099fd8
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI

..snip..

 Call Trace:
  ? ibft_create_kobject+0x1d2/0x1d2 [iscsi_ibft]
  do_one_initcall+0x44/0x1d0
  ? kmem_cache_alloc_trace+0x119/0x220
  do_init_module+0x5c/0x270
  __do_sys_init_module+0x12e/0x1b0
  do_syscall_64+0x40/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Fix this bug by saving the address of the physical location
of the ibft; later the driver will use isa_bus_to_virt() to get
the correct virtual address.

N.B. On each reboot KASLR randomizes the virtual addresses so
assuming phys_to_virt before KASLR does its deed is incorrect.

Simplify the code by renaming find_ibft_region()
to reserve_ibft_region() and remove all the wrappers.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2021-07-31 22:20:24 -04:00
Iskren Chernev
4b77f1dff5 drivers: qcom: pinctrl: Add pinctrl driver for sm6115
Based on CAF implementation with egpio/wake_reg support removed.

Similar function names were merged to reduce total number of functions.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210723192352.546902-3-iskren.chernev@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-31 23:23:06 +02:00
Iskren Chernev
d1945f6c5b dt-bindings: pinctrl: qcom: Add SM6115 pinctrl bindings
Add device tree binding Documentation details for Qualcomm SM6115 and
SM4250 pinctrl.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210723192352.546902-2-iskren.chernev@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-31 23:22:59 +02:00
Cai Huoqing
853bc39570 drm/pl111: Remove unused including <linux/version.h>
Remove including <linux/version.h> that don't need it.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727052107.659-1-caihuoqing@baidu.com
2021-07-31 20:52:01 +02:00
Jakub Kicinski
d39e8b92c3 Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:

====================
bpf-next 2021-07-30

We've added 64 non-merge commits during the last 15 day(s) which contain
a total of 83 files changed, 5027 insertions(+), 1808 deletions(-).

The main changes are:

1) BTF-guided binary data dumping libbpf API, from Alan.

2) Internal factoring out of libbpf CO-RE relocation logic, from Alexei.

3) Ambient BPF run context and cgroup storage cleanup, from Andrii.

4) Few small API additions for libbpf 1.0 effort, from Evgeniy and Hengqi.

5) bpf_program__attach_kprobe_opts() fixes in libbpf, from Jiri.

6) bpf_{get,set}sockopt() support in BPF iterators, from Martin.

7) BPF map pinning improvements in libbpf, from Martynas.

8) Improved module BTF support in libbpf and bpftool, from Quentin.

9) Bpftool cleanups and documentation improvements, from Quentin.

10) Libbpf improvements for supporting CO-RE on old kernels, from Shuyi.

11) Increased maximum cgroup storage size, from Stanislav.

12) Small fixes and improvements to BPF tests and samples, from various folks.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
  tools: bpftool: Complete metrics list in "bpftool prog profile" doc
  tools: bpftool: Document and add bash completion for -L, -B options
  selftests/bpf: Update bpftool's consistency script for checking options
  tools: bpftool: Update and synchronise option list in doc and help msg
  tools: bpftool: Complete and synchronise attach or map types
  selftests/bpf: Check consistency between bpftool source, doc, completion
  tools: bpftool: Slightly ease bash completion updates
  unix_bpf: Fix a potential deadlock in unix_dgram_bpf_recvmsg()
  libbpf: Add btf__load_vmlinux_btf/btf__load_module_btf
  tools: bpftool: Support dumping split BTF by id
  libbpf: Add split BTF support for btf__load_from_kernel_by_id()
  tools: Replace btf__get_from_id() with btf__load_from_kernel_by_id()
  tools: Free BTF objects at various locations
  libbpf: Rename btf__get_from_id() as btf__load_from_kernel_by_id()
  libbpf: Rename btf__load() as btf__load_into_kernel()
  libbpf: Return non-null error on failures in libbpf_find_prog_btf_id()
  bpf: Emit better log message if bpf_iter ctx arg btf_id == 0
  tools/resolve_btfids: Emit warnings and patch zero id for missing symbols
  bpf: Increase supported cgroup storage value size
  libbpf: Fix race when pinning maps in parallel
  ...
====================

Link: https://lore.kernel.org/r/20210730225606.1897330-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-31 11:23:26 -07:00
Douglas Anderson
32ce3b3203 drm/panel: atna33xc20: Introduce the Samsung ATNA33XC20 panel
The Samsung ATNA33XC20 panel is an AMOLED eDP panel that has backlight
control over the DP AUX channel.

This panel is _almost_ able to be controlled in a "simple" way (and it
originally was implemented in panel-simple.c), but it's really
impossible to get the backlight semantics right there without adding
wacky special-case code to panel-simple. Let's give up and clone the
parts of panel-simple that we need and implement the power sequence
that this panel needs.

NOTE: we'll still leave the devicetree bindings alone. Even though the
power-sequencing is non-standard the bindings are still "simple".

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.6.I3a2900080f8749d2bb4baf49ca902db4b0e1df7d@changeid
2021-07-31 20:14:15 +02:00
Douglas Anderson
81c3212dd5 Revert "drm/panel-simple: Support for delays between GPIO & regulator"
This reverts commit 18a1488bf1.

Those delays were added to support the Samsung ATNA33XC20
panel. However, we've moving that to its own panel driver and out of
panel-simple. That means we don't need the ability to specify this
delay.

NOTE: it's unlikely we want to keep this delay "just in case" some
other panel needs it. The enable-gpio and the power supply are really
supposed to be different ways to specify the same thing: the main
enable of the panel. Supporting a delay between them doesn't really
make sense.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.5.Ie44e3e5b7a926392541d575ca84c56931596513f@changeid
2021-07-31 20:10:50 +02:00