Commit graph

1,058,063 commits

Author SHA1 Message Date
Douglas Anderson
7c4125b093 Revert "drm/panel-simple: Add Samsung ATNA33XC20"
This reverts commit 4bfe6c8f7c.

This panel's power sequencing really can't be handled properly by
panel-simple because of the special sequencing needed for the EL_ON3
GPIO. The only way it was sorta working in the past was by trying to
jam that signal into the "enable-gpio", but that really wasn't a good
fit. We'll add a custom panel driver for this panel to do it right.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.4.Id9f076ec5f35633f8ce931051af268a04c45c075@changeid
2021-07-31 20:10:45 +02:00
Douglas Anderson
e183bf31cf drm/bridge: ti-sn65dsi86: Add some 100 us delays
The manual has always said that we need 100 us delays in a few
places. Though it hasn't seemed to be a big deal to skip these, let's
add them in case it makes something happier.

NOTE: this fixes no known issues but it seems good to make it right.

Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.3.I842d483139531aa4651da8338512fdf0171ff23c@changeid
2021-07-31 20:03:24 +02:00
Douglas Anderson
acb06210b0 drm/bridge: ti-sn65dsi86: Fix power off sequence
When testing with a panel that's apparently a little more persnickety
about the correct power sequence (specifically Samsung ATNA33XC20), we
found that the ti-sn65dsi86 was doing things just slightly wrong.

Looking closely at the ti-sn65dsi86's datasheet, the power off
sequence is supposed to be:
1. Clear VSTREAM_ENABLE bit
2. Stop DSI stream from GPU. DSI lanes must be placed in LP11 state.
3. Program the ML_TX_MODE to 0x0 (OFF)
4. Program the DP_NUM_LANES register to 0x0
5. Clear the DP_PLL_EN bit.
6. Deassert the EN pin.
7. Remove power from supply pins

Since we were doing the whole sequence in the "disable", I believe
that step #2 (stopping the DSI stream from the GPU) wasn't
happening. We also weren't setting DP_NUM_LANES to 0.

Let's fix this.

NOTE: things are a little asymmetric now. For instance, we turn the
PLL on in "enable" but now we're not turning it off until
"post_disable". It would seem to make sense to move the PLL turning on
to "pre_enable" to match. Unfortunately, I don't believe that's
allowed. It looks as if (in the non-refclk mode which probably nobody
is using) we have to wait until the MIPI clock is there before we can
enable the PLL. In any case, the way it is here won't really
hurt--it'll just leave the PLL on a little longer.

Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.2.If8a8ec3bf1855cf0dbb62c005a71d6698c99c125@changeid
2021-07-31 20:03:17 +02:00
Douglas Anderson
64c0274fb1 drm/dp: Don't zero PWMGEN_BIT_COUNT when driver_pwm_freq_hz not specified
The function drm_edp_backlight_init() is defined such that the
"driver_pwm_freq_hz" parameter is optional--it's 0 if you don't want
to futz with it. If you follow this variable through, you'll find out
that if it's 0 we won't ever set the "bl->pwmgen_bit_count", leaving
it as 0.

That means that before using it in drm_edp_backlight_enable() we need
to check to see if it's non-zero.

Programming this field to zero was confusing the panel I tested with
(Samsung ATNA33XC20). The backlight still worked somewhat but the
brightness values didn't correspond to what they should have been.

Fixes: 867cf9cd73 ("drm/dp: Extract i915's eDP backlight code into DRM helpers")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.1.If017efce7116ae8ba015ed7def840c390a0e0c77@changeid
2021-07-31 20:02:59 +02:00
Théo Borém Fabris
6a25893cb0 iio: dac: max5821: convert device register to device managed function
Add a device managed hook, via devm_add_action_or_reset() and
max5821_regulator_disable(), to disable voltage regulator on device
detach.
Replace iio_device_register() by devm_iio_device_register() and remove
the max5821_remove() function used to unregister the device and disable the
voltage regulator.
Remove i2c_set_clientdata() from the probe function, since
i2c_get_clientdata() is not used anymore.
Remove regulator_disable() calls from the probe function.

Signed-off-by: Théo Borém Fabris <theobf@usp.br>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210724220159.11998-1-theobf@usp.br
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-31 18:17:22 +01:00
Christophe Branchereau
eaaa23d71e dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
Add both the jz4760 and jz4760b, plus a property to use the internal
divider on the b variant and document it.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210726082033.351533-6-cbranchereau@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-31 18:14:54 +01:00
Christophe Branchereau
bf1b2418c2 iio/adc: ingenic: add JZ4760B support to the sadc driver
The JZ4760B variant differs slightly from the JZ4760: it has a bit called VBAT_SEL in the CFG register.

In order to correctly sample the battery voltage on existing handhelds using this SOC, the bit must be cleared.

We leave the possibility to set the bit, by using the "ingenic,use-internal-divider" in the devicetree.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Link: https://lore.kernel.org/r/20210726082033.351533-5-cbranchereau@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-31 18:14:53 +01:00
Christophe Branchereau
b9e9bdd425 iio/adc: ingenic: add JZ4760 support to the sadc driver
The jz4760 sadc is very similar to the jz4770 one, but has a VREF of 2.5V
and 3 aux channels.

modify ingenic_adc_read_chan_info_raw() needs a change to account for it.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>

Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210726082033.351533-4-cbranchereau@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-31 18:14:53 +01:00
Christophe Branchereau
d827cbcdb3 dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
The JZ4760(B) socs have 3 AUX inputs, add an entry to prepare including the one named AUX in the sadc driver.
Leaving the rest untouched as it's ABI.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>

Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210726082033.351533-3-cbranchereau@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-31 18:14:53 +01:00
Christophe Branchereau
9c5eb724f9 iio/adc: ingenic: rename has_aux2 to has_aux_md
The jz4760(b) socs have 3 aux channels.

The purpose of has_aux2 is to set the MD bits used to select
the AUX channel to be sampled, not to describe the hardware.

Rename it to a more appropriate name.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>

Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210726082033.351533-2-cbranchereau@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-31 18:14:53 +01:00
Linus Torvalds
f3438b4c4e 3 cifs/smb3 fixes, including two for stable, and a fix for an fallocate problem noticed by Clang
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmEEaj8ACgkQiiy9cAdy
 T1FdSgv+KaGjM/IPPHDymSoWEtkPp3x3frPEXfJrTSD/M8NVx+9UEnwH8JEZEn+t
 PEQyGxOx28qo8ZtNJKmKAAkAm45/gTriteyjk8m2witJdDaK7wyhRYJ3Mmo99ot5
 hOV55Jn40N+dK4r2AfWv6WauiDnLw83QlSmm5eN1/om3FXFx49IOjeKGaagpHGSQ
 MaaEX0pMcyMop/a1TFOC01M8ergYfWF/3S3zmA5S9Ei4+PefxbhYpdj4RTRZY7rp
 +2ZNyAs4Zc88l6weF4XCNck/2qrW6A4a1DCmnD19MJTGK+4FqqIBZ0f5fWV6aFGl
 EIi6vsHnt4b2MGkePs/SrpifCMZk/uSM7p9TQvplX0KHhIJ5h55pO0+GFdH0uYlv
 KkV2SjepCavsn8pwhVyqMRQ8+/MCQi+vAAP9vmdD2+V0cps8VFBexVSfuWEdwSBd
 JuDWeVP1kgR4OQGrCp4r8wWhSCh+FOGsdrwTHTwPWL9GCoUuiTui6Z36JM5fT6Dg
 437Hg7RY
 =qJCo
 -----END PGP SIGNATURE-----

Merge tag '5.14-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Three cifs/smb3 fixes, including two for stable, and a fix for an
  fallocate problem noticed by Clang"

* tag '5.14-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add missing parsing of backupuid
  smb3: rc uninitialized in one fallocate path
  SMB3: fix readpage for large swap cache
2021-07-31 09:25:12 -07:00
Jakub Kicinski
d2e11fd2b7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicting commits, all resolutions pretty trivial:

drivers/bus/mhi/pci_generic.c
  5c2c853159 ("bus: mhi: pci-generic: configurable network interface MRU")
  56f6f4c4eb ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")

drivers/nfc/s3fwrn5/firmware.c
  a0302ff590 ("nfc: s3fwrn5: remove unnecessary label")
  46573e3ab0 ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")
  801e541c79 ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")

MAINTAINERS
  7d901a1e87 ("net: phy: add Maxlinear GPY115/21x/24x driver")
  8a7b46fa79 ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-31 09:14:46 -07:00
Akhil P Oommen
192f4ee3e4 drm/msm/a6xx: Add support for Adreno 7c Gen 3 gpu
This patch adds support for the gpu found in the Snapdragon 7c Gen 3
compute platform. This gpu is similar to the exisiting a660 gpu with
minor delta in the programing sequence. As the Adreno GPUs are moving
away from a numeric chipid based naming scheme to a string, it was
decided to use 0x06030500 as the chip id of this gpu to communicate
to the userspace driver.

Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210730011945.v4.3.I610377db0934b6b7deda532ec2bf786a02c38c01@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-07-31 08:35:23 -07:00
Akhil P Oommen
27514ce2e7 drm/msm/a6xx: Use rev to identify SKU
Use rev instead of revn to identify the SKU. This is in
preparation to the introduction of 7c3 gpu which won't have a
revn.

Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210730011945.v4.2.I286ef007fcadd9e6ee3b2c0ad948f990735f9610@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-07-31 08:35:23 -07:00
Akhil P Oommen
a6f24383f6 drm/msm/a6xx: Fix llcc configuration for a660 gpu
Add the missing scache_cntl0 register programing which is required for
a660 gpu.

Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210730011945.v4.1.I110b87677ef16d97397fb7c81c07a16e1f5d211e@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-07-31 08:35:23 -07:00
Gwendal Grignou
7a3605bef8 iio: sx9310: Support ACPI property
Use device_property_read_... to support both device tree and ACPI
bindings.
Simplify the logic for reading "combined-sensors" array, as we assume
it has been vetted at firmware build time.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210728181757.187627-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-31 15:15:28 +01:00
Colin Ian King
5afc1540f1 iio: adc: Fix incorrect exit of for-loop
Currently the for-loop that scans for the optimial adc_period iterates
through all the possible adc_period levels because the exit logic in
the loop is inverted. I believe the comparison should be swapped and
the continue replaced with a break to exit the loop at the correct
point.

Addresses-Coverity: ("Continue has no effect")
Fixes: e08e19c331 ("iio:adc: add iio driver for Palmas (twl6035/7) gpadc")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210730071651.17394-1-colin.king@canonical.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-31 14:46:05 +01:00
Takashi Iwai
825a52482a ALSA: core: Fix double calls of snd_card_free() via devres
At the transition to the devres-managed card release, we've put the
check of double-free at trigger_card_release().  But this wasn't
enough, as the code path calls snd_card_free() again, and it would
lead to the doubly snd_card_free() calls.

Actually the v1 patch was correct to handle this, but I forgot that
corner case and moved the check to the more obvious place as I thought
it's clearer.  But, as usual, devils live in details.

This patch corrects the check of the double-free to the right place,
with a bit more comments.

Fixes: e8ad415b7a ("ALSA: core: Add managed card creation")
Link: https://lore.kernel.org/r/20210731083446.26680-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-31 10:36:06 +02:00
Jason Wang
fac24b0f34 ALSA: pcxhr: use __func__ to get funcion's name in an output message
Prefer using '"%s...", __func__' to get current function's name in
an output message.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Link: https://lore.kernel.org/r/20210731052647.141046-1-wangborong@cdjrlc.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-31 10:35:11 +02:00
Stephen Boyd
5f1fc9726f clk: renesas: Updates for v5.15
- Add display (DU and DSI) clocks on R-Car V3U,
   - Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and
     resets on RZ/G2L,
   - Miscellaneous fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYQP+HQAKCRCKwlD9ZEnx
 cFRlAPoCg+s2oX5NVLFLtBWHn4jikbkzm63MANaLs9yizfP7CwEAtCwl67MeZNyp
 vNPIj9Bjx5afXYnykgTYBoArFxUUPQc=
 =B2vK
 -----END PGP SIGNATURE-----

Merge tag 'renesas-clk-for-v5.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

 - Add display (DU and DSI) clocks on R-Car V3U
 - Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and
  resets on RZ/G2L
 - Miscellaneous fixes and improvements

* tag 'renesas-clk-for-v5.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r9a07g044: Add entry for fixed clock P0_DIV2
  dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock
  clk: renesas: r9a07g044: Add clock and reset entries for ADC
  clk: renesas: r9a07g044: Add clock and reset entries for CANFD
  clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch]
  clk: renesas: r9a07g044: Add GPIO clock and reset entries
  clk: renesas: r9a07g044: Add SSIF-2 clock and reset entries
  clk: renesas: r9a07g044: Add USB clocks/resets
  clk: renesas: r9a07g044: Add DMAC clocks/resets
  clk: renesas: r9a07g044: Add I2C clocks/resets
  clk: renesas: r8a779a0: Add the DSI clocks
  clk: renesas: r8a779a0: Add the DU clock
  clk: renesas: rzg2: Rename i2c-dvfs to iic-pmic
  clk: renesas: rzg2l: Fix off-by-one check in rzg2l_cpg_clk_src_twocell_get()
  clk: renesas: rzg2l: Avoid mixing error pointers and NULL
  clk: renesas: rzg2l: Fix a double free on error
  clk: renesas: rzg2l: Fix return value and unused assignment
  clk: renesas: rzg2l: Remove unneeded semicolon
2021-07-31 00:57:03 -07:00
Brian Norris
f828b0bcac clk: fix leak on devm_clk_bulk_get_all() unwind
clk_bulk_get_all() allocates an array of struct clk_bulk data for us
(unlike clk_bulk_get()), so we need to free it. Let's use the
clk_bulk_put_all() helper.

kmemleak complains, on an RK3399 Gru/Kevin system:

unreferenced object 0xffffff80045def00 (size 128):
  comm "swapper/0", pid 1, jiffies 4294667682 (age 86.394s)
  hex dump (first 32 bytes):
    44 32 60 fe fe ff ff ff 00 00 00 00 00 00 00 00  D2`.............
    48 32 60 fe fe ff ff ff 00 00 00 00 00 00 00 00  H2`.............
  backtrace:
    [<00000000742860d6>] __kmalloc+0x22c/0x39c
    [<00000000b0493f2c>] clk_bulk_get_all+0x64/0x188
    [<00000000325f5900>] devm_clk_bulk_get_all+0x58/0xa8
    [<00000000175b9bc5>] dwc3_probe+0x8ac/0xb5c
    [<000000009169e2f9>] platform_drv_probe+0x9c/0xbc
    [<000000005c51e2ee>] really_probe+0x13c/0x378
    [<00000000c47b1f24>] driver_probe_device+0x84/0xc0
    [<00000000f870fcfb>] __device_attach_driver+0x94/0xb0
    [<000000004d1b92ae>] bus_for_each_drv+0x8c/0xd8
    [<00000000481d60c3>] __device_attach+0xc4/0x150
    [<00000000a163bd36>] device_initial_probe+0x1c/0x28
    [<00000000accb6bad>] bus_probe_device+0x3c/0x9c
    [<000000001a199f89>] device_add+0x218/0x3cc
    [<000000001bd84952>] of_device_add+0x40/0x50
    [<000000009c658c29>] of_platform_device_create_pdata+0xac/0x100
    [<0000000021c69ba4>] of_platform_bus_create+0x190/0x224

Fixes: f08c2e2865 ("clk: add managed version of clk_bulk_get_all")
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20210731025950.2238582-1-briannorris@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-07-31 00:53:38 -07:00
Phillip Potter
fc577e46eb staging: r8188eu: remove include/odm_debug.h
Remove include/odm_debug.h in its entirety. To do this, first:

(1) Remove DebugLevel and DebugComponents members from the struct
    odm_dm_struct definition, and any uses of these elsewhere in
    the driver.

(2) Remove the function ODM_InitDebugSetting from hal/odm_debug.c
    whilst leaving the file in place for now as it contains a global
    which is still used and will be removed by further cleanup code.
    Also remove all of its callers. All the function does is set the
    members mentioned above.

(3) Remove the now redundant constants and their usages:
    ODM_CMNINFO_DBG_LEVEL
    ODM_CMNINFO_DBG_COMP
    HW_DEF_ODM_DBG_FLAG
    HW_DEF_FA_CNT_DUMP
    This includes usage within a few hexadecimal ioctl switch cases
    in os_dep/ioctl_linux.c (although only the call itself within
    0x11 as it contains additional code currently).

(4) Finally, remove the file itself and its inclusion within
    include/odm_precomp.h, as none of the remaining content is used
    from anywhere else in the driver.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731003937.68615-15-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:24:52 +02:00
Phillip Potter
f8a846911d staging: r8188eu: remove DbgPrint and RT_PRINTK macro definitions
Remove DbgPrint and RT_PRINTK macro definitions from include/odm_debug.h,
as they are called from nowhere and are therefore superfluous. Also
remove comment in core/rtw_xmit.c referring to DbgPrint so that future
confusion is prevented.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731003937.68615-14-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:24:52 +02:00
Phillip Potter
5225e772ac staging: r8188eu: remove ODM_RT_TRACE macro definition
Remove ODM_RT_TRACE macro definition from include/odm_debug.h, as
it is called from nowhere and is therefore superfluous.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731003937.68615-13-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:24:51 +02:00
Phillip Potter
b08c473f3e staging: r8188eu: remove ODM_RT_TRACE calls from hal/odm.c
Remove ODM_RT_TRACE calls from hal/odm.c, as by removing these calls
in this file and others, we can ultimately then remove the macro
definition itself, which does not follow best practice.

Also remove three empty functions and their calls from hal/odm.c, as
they only contained ODM_RT_TRACE calls, and remove the corresponding
include/odm_precomp.h declarations.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731003937.68615-12-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:24:51 +02:00
Phillip Potter
a04e78c371 staging: r8188eu: remove ODM_RT_TRACE calls from hal/odm_RegConfig8188E.c
Remove ODM_RT_TRACE calls from hal/odm_RegConfig8188E.c, as by removing these
calls in this file and others, we can ultimately then remove the macro
definition itself, which does not follow best practice.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731003937.68615-11-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:23:54 +02:00
Phillip Potter
40677a39a6 staging: r8188eu: remove ODM_RT_TRACE calls from hal/odm_RTL8188E.c
Remove ODM_RT_TRACE calls from hal/odm_RTL8188E.c, as by removing these
calls in this file and others, we can ultimately then remove the macro
definition itself, which does not follow best practice.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731003937.68615-10-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:22:30 +02:00
Phillip Potter
da232ccb97 staging: r8188eu: remove ODM_RT_TRACE calls from hal/odm_HWConfig.c
Remove ODM_RT_TRACE calls from hal/odm_HWConfig.c, as by removing these
calls in this file and others, we can ultimately then remove the macro
definition itself, which does not follow best practice.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731003937.68615-9-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:22:30 +02:00
Phillip Potter
73f1e06f55 staging: r8188eu: remove ODM_RT_TRACE calls from hal/HalPhyRf_8188e.c
Remove ODM_RT_TRACE calls from hal/HalPhyRf_8188e.c, as by removing these
calls in this file and others, we can ultimately then remove the macro
definition itself, which does not follow best practice.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731003937.68615-8-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:22:29 +02:00
Phillip Potter
8bde3b8aaf staging: r8188eu: remove ODM_RT_TRACE calls from hal/Hal8188ERateAdaptive.c
Remove ODM_RT_TRACE calls from hal/Hal8188ERateAdaptive.c, as by removing
these calls in this file and others, we can ultimately then remove the
macro definition itself, which does not follow best practice.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731003937.68615-7-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:22:29 +02:00
Phillip Potter
8362f65afa staging: r8188eu: remove ASSERT ifndef and macro definition
Remove ASSERT ifndef and macro definition from include/odm_debug.h, as
these are unused and therefore superfluous.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731003937.68615-6-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:21:42 +02:00
Phillip Potter
6a772eabd4 staging: r8188eu: remove ODM_RT_TRACE_F macro definition
Remove ODM_RT_TRACE_F macro definition from include/odm_debug.h, as
it is called from nowhere and is therefore superfluous.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731003937.68615-5-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:21:42 +02:00
Phillip Potter
c32641183b staging: r8188eu: remove ODM_RT_ASSERT macro definition and caller
Remove ODM_RT_ASSERT macro definition from include/odm_debug.h and
its one caller in hal/odm.c, as this debug code is against best
practice.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731003937.68615-4-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:21:42 +02:00
Phillip Potter
6a6580673e staging: r8188eu: remove ODM_dbg_* macro definitions
Remove ODM_dbg_* macro definitions from include/odm_debug.h, as
they are called from nowhere and are therefore superfluous.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731003937.68615-3-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:21:42 +02:00
Phillip Potter
15e4539f58 staging: r8188eu: remove ODM_PRINT_ADDR macro definition
Remove ODM_PRINT_ADDR macro definition from include/odm_debug.h, as
it is called from nowhere and is therefore superfluous.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731003937.68615-2-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:21:42 +02:00
Michael Straube
bf99a7ce2f staging: r8188eu: add missing spaces after ',' and before braces
Add missing spaces to clear checkpatch errors.

ERROR: space required before the open parenthesis '('
ERROR: space required before the open brace '{'
ERROR: space required after that ',' (ctx:ExV)

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210730204153.27270-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:21:12 +02:00
Michael Straube
33852468aa staging: r8188eu: remove spaces before ',' and ')'
Remove spaces to clear checkpatch errors.

ERROR: space prohibited before that ',' (ctx:WxW)
ERROR: space prohibited before that close parenthesis ')'

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210730204153.27270-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:21:12 +02:00
Fabio M. De Francesco
56febcc259 staging: r8188eu: Fix different base types in assignments and parameters
Fix sparse warnings of different base types in assignments
and in passing function parameters.

Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210730181452.23062-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31 09:20:55 +02:00
Vincent Palomares
1084514ca9 scsi: ufs: Allow async suspend/resume callbacks
Allow UFS suspend/resume callbacks to run in parallel with other
suspend/resume callbacks. This can recoup dozens of milliseconds on the
resume path if UFS hardware needs to be powered back on.

Suspending and resuming asynchronously is safe to do so long as the driver
callbacks only depend on resources made available by either a) parent
devices or b) devices explicitly marked as suppliers with device_link_add.

Link: https://lore.kernel.org/r/20210728012743.1063928-1-paillon@google.com
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Vincent Palomares <paillon@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-30 23:48:36 -04:00
James Smart
7740b615b6 scsi: lpfc: Fix possible ABBA deadlock in nvmet_xri_aborted()
The lpfc_sli4_nvmet_xri_aborted() routine takes out the abts_buf_list_lock
and traverses the buffer contexts to match the xri. Upon match, it then
takes the context lock before potentially removing the context from the
associated buffer list. This violates the lock hierarchy used elsewhere in
the driver of locking context, then the abts_buf_list_lock - thus a
possible deadlock.

Resolve by: after matching, release the abts_buf_list_lock, then take the
context lock, and if to be deleted from the list, retake the
abts_buf_list_lock, maintaining lock hierarchy. This matches same list lock
hierarchy as elsewhere in the driver

Link: https://lore.kernel.org/r/20210730163309.25809-1-jsmart2021@gmail.com
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-30 23:47:19 -04:00
Colin Ian King
0f783c2d64 scsi: qla2xxx: Fix spelling mistakes "allloc" -> "alloc"
There are two spelling mistakes with the same triple l in alloc, one in a
comment, the other in a ql_dbg() debug message. Fix them.

Link: https://lore.kernel.org/r/20210729082413.4761-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-30 22:31:55 -04:00
Christoph Hellwig
75ca56409e scsi: bsg: Move the whole request execution into the SCSI/transport handlers
Remove the amount of indirect calls by making the handler responsible for
the entire execution of the request.

Link: https://lore.kernel.org/r/20210729064845.1044147-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-30 22:22:36 -04:00
Christoph Hellwig
1e61c1a804 scsi: block: Remove the remaining SG_IO-related fields from struct request_queue
Move the sg_timeout and sg_reserved_size fields into the bsg_device and
scsi_device structures as they have nothing to do with generic block I/O.
Note that these values are now separate for bsg vs. SCSI device node
access, but that just matches how /dev/sg vs the other nodes has always
behaved.

Link: https://lore.kernel.org/r/20210729064845.1044147-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-30 22:22:36 -04:00
Christoph Hellwig
cf93a27446 scsi: block: Remove BLK_SCSI_MAX_CMDS
This was used for the table based SCSI passthough permission checking that
is gone now.

Link: https://lore.kernel.org/r/20210729064845.1044147-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-30 22:22:36 -04:00
Christoph Hellwig
ead09dd3ae scsi: bsg: Simplify device registration
Use the per-device cdev_device_interface to store the bsg data in the char
device inode, and thus remove the need to embedd the bsg_class_device
structure in the request_queue.

Link: https://lore.kernel.org/r/20210729064845.1044147-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-30 22:22:36 -04:00
Christoph Hellwig
ba51bdafaa scsi: sr: cdrom: Move cdrom_read_cdda_bpc() into the sr driver
cdrom_read_cdda_bpc() relies on sending SCSI command to the low level
driver using a REQ_OP_SCSI_IN request.  This isn't generic block layer
functionality, so move the actual low-level code into the sr driver and
call it through a new read_cdda_bpc method in the cdrom_device_ops
structure.

With this the CDROM code does not have to pull in scsi_normalize_sense()
and depend on CONFIG_SCSI_COMMON.

Link: https://lore.kernel.org/r/20210730072752.GB23847%40lst.de
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-30 22:13:09 -04:00
Lucas De Marchi
3989de0ef5 drm/i915/xehp: Fix missing sentinel on mcr_ranges_xehp
There's a missing sentinel since we are not using ARRAY_SIZE(), but rather
checking that the .start is 0 to stop the iteration in mcr_range().

	BUG: KASAN: global-out-of-bounds in mcr_range.isra.0+0x69/0xa0 [i915]
	Read of size 4 at addr ffffffffa0889928 by task modprobe/3881

Fixes: d8905ba705 ("drm/i915/xehp: Define multicast register ranges")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730191115.2514581-1-lucas.demarchi@intel.com
2021-07-30 19:06:13 -07:00
Tianjia Zhang
567c39047d selftests/sgx: Fix Q1 and Q2 calculation in sigstruct.c
Q1 and Q2 are numbers with *maximum* length of 384 bytes. If the
calculated length of Q1 and Q2 is less than 384 bytes, things will
go wrong.

E.g. if Q2 is 383 bytes, then

1. The bytes of q2 are copied to sigstruct->q2 in calc_q1q2().
2. The entire sigstruct->q2 is reversed, which results it being
   256 * Q2, given that the last byte of sigstruct->q2 is added
   to before the bytes given by calc_q1q2().

Either change in key or measurement can trigger the bug. E.g. an
unmeasured heap could cause a devastating change in Q1 or Q2.

Reverse exactly the bytes of Q1 and Q2 in calc_q1q2() before returning
to the caller.

Fixes: 2adcba79e6 ("selftests/x86: Add a selftest for SGX")
Link: https://lore.kernel.org/linux-sgx/20210301051836.30738-1-tianjia.zhang@linux.alibaba.com/
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-07-30 17:20:01 -06:00
Linus Torvalds
c7d1022326 Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi (mac80211)
and netfilter trees.
 
 Current release - regressions:
 
  - mac80211: fix starting aggregation sessions on mesh interfaces
 
 Current release - new code bugs:
 
  - sctp: send pmtu probe only if packet loss in Search Complete state
 
  - bnxt_en: add missing periodic PHC overflow check
 
  - devlink: fix phys_port_name of virtual port and merge error
 
  - hns3: change the method of obtaining default ptp cycle
 
  - can: mcba_usb_start(): add missing urb->transfer_dma initialization
 
 Previous releases - regressions:
 
  - set true network header for ECN decapsulation
 
  - mlx5e: RX, avoid possible data corruption w/ relaxed ordering and LRO
 
  - phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811 PHY
 
  - sctp: fix return value check in __sctp_rcv_asconf_lookup
 
 Previous releases - always broken:
 
  - bpf:
        - more spectre corner case fixes, introduce a BPF nospec
          instruction for mitigating Spectre v4
        - fix OOB read when printing XDP link fdinfo
        - sockmap: fix cleanup related races
 
  - mac80211: fix enabling 4-address mode on a sta vif after assoc
 
  - can:
        - raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
        - j1939: j1939_session_deactivate(): clarify lifetime of
               session object, avoid UAF
        - fix number of identical memory leaks in USB drivers
 
  - tipc:
        - do not blindly write skb_shinfo frags when doing decryption
        - fix sleeping in tipc accept routine
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmEEWm8ACgkQMUZtbf5S
 Irv84A//V/nn9VRdpDpmodwBWVEc9SA00M/nmziRBLwRyG+fRMtnePY4Ha40TPbh
 LL6orth08hZKOjVmMc6Ea4EjZbV5E3iAKtAnaX6wi1HpEXVxKtFYnWxu9ydwTEd9
 An1fltDtWYkNi3kiq7il+Tp1/yZAQ+NYv5zQZCWJ47kkN3jkjULdAEBqODA2A6Ul
 0PQgS1rKzXukE19PlXDuaNuEekhTiEfaTwzHjdBJZkj1toGJGfHsvdQ/YJjixzB9
 44SjE4PfxIaMWP0BVaD6hwzaVQhaZETXhZZufdIDdQd7sDbmd6CPODX6mXfLEq4u
 JaWylgobsK+5ScHE6siVI+ZlW7stq9l1Ynm10ADiwsZVzKEoP745484aEFOLO6Z+
 Ln/IqDQCP/yJQmnl2i0+TfqVDh6BKYoIfUUK/+nzHw4Otycy0m3kj4P+74aYfjOv
 Q+cUgbXUemcrpq6wGUK+zK0NyNHVILvdPDnHPMMypwqPk18y5ZmFvaJAVUPSavD9
 N7t9LoLyGwK3i/Ir4l+JJZ1KgAv1+TbmyNBWvY1Yk/r/vHU3nBPIv26s7YarNAwD
 094vJEJ0+mqO4h+Xj1Nc7HEBFi46JfpN2L8uYoM7gpwziIRMdmpXVLmpEk43WmFi
 UMwWJWqabPEXaozC2UFcFLSk+jS7DiD+G5eG+Fd5HecmKzd7RI0=
 =sKPI
 -----END PGP SIGNATURE-----

Merge tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi
  (mac80211) and netfilter trees.

  Current release - regressions:

   - mac80211: fix starting aggregation sessions on mesh interfaces

  Current release - new code bugs:

   - sctp: send pmtu probe only if packet loss in Search Complete state

   - bnxt_en: add missing periodic PHC overflow check

   - devlink: fix phys_port_name of virtual port and merge error

   - hns3: change the method of obtaining default ptp cycle

   - can: mcba_usb_start(): add missing urb->transfer_dma initialization

  Previous releases - regressions:

   - set true network header for ECN decapsulation

   - mlx5e: RX, avoid possible data corruption w/ relaxed ordering and
     LRO

   - phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811
     PHY

   - sctp: fix return value check in __sctp_rcv_asconf_lookup

  Previous releases - always broken:

   - bpf:
       - more spectre corner case fixes, introduce a BPF nospec
         instruction for mitigating Spectre v4
       - fix OOB read when printing XDP link fdinfo
       - sockmap: fix cleanup related races

   - mac80211: fix enabling 4-address mode on a sta vif after assoc

   - can:
       - raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
       - j1939: j1939_session_deactivate(): clarify lifetime of session
         object, avoid UAF
       - fix number of identical memory leaks in USB drivers

   - tipc:
       - do not blindly write skb_shinfo frags when doing decryption
       - fix sleeping in tipc accept routine"

* tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  gve: Update MAINTAINERS list
  can: esd_usb2: fix memory leak
  can: ems_usb: fix memory leak
  can: usb_8dev: fix memory leak
  can: mcba_usb_start(): add missing urb->transfer_dma initialization
  can: hi311x: fix a signedness bug in hi3110_cmd()
  MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
  bpf: Fix leakage due to insufficient speculative store bypass mitigation
  bpf: Introduce BPF nospec instruction for mitigating Spectre v4
  sis900: Fix missing pci_disable_device() in probe and remove
  net: let flow have same hash in two directions
  nfc: nfcsim: fix use after free during module unload
  tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
  sctp: fix return value check in __sctp_rcv_asconf_lookup
  nfc: s3fwrn5: fix undefined parameter values in dev_err()
  net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32
  net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()
  net/mlx5: Unload device upon firmware fatal error
  net/mlx5e: Fix page allocation failure for ptp-RQ over SF
  net/mlx5e: Fix page allocation failure for trap-RQ over SF
  ...
2021-07-30 16:01:36 -07:00
Linus Torvalds
e1dab4c02d ACPI fixes for 5.14-rc4
- Revert recent change of the ACPI IRQ resources handling that
    attempted to improve the ACPI IRQ override selection logic, but
    introduced serious regressions on some systems (Hui Wang).
 
  - Fix up quirks for AMD platforms in the suspend-to-idle support
    code so as to take upcoming systems using uPEP HID AMDI007 into
    account as appropriate (Mario Limonciello).
 
  - Fix the code retrieving DPTF attributes of the PCH FIVR so that
    it agrees on the return data type with the ACPI control method
    evaluated for this purpose (Srinivas Pandruvada).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmEESVASHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxAg4P/3XEhqudZI7+5VsGgjdVSuYIQZEVBiIt
 6M1WOIVwbL+pybeadYVTIzjsBIWWyem48mvUf9liqpzNfgTdyVdbANyJNct9NsgN
 fETI/ethoBE0+VA8m5Z59ze3vwLWHII++GrL2J6/XQm+VV1mul2FsZ9GJj8v+8zf
 rD/OatQZMkdLQ5Z7E3OfeNRETmyuxd95wI3xmNcUxtMWkpWq41tRCoXHRPGuWxGF
 xJKRHDtN7MqXI6WPvdKLMZ2XXbbbmwr4fw5/r5schkP8dbtzMLMPhd7blZlA81jF
 no7jNQ8EPs5IIgpMkxNo1wVnYK0ALDWrAKifODsQe1WJbRThz9SRAssYD7WQkczE
 zoE6FcUt2rrKj91P0cnOUWJ+PI8WTa4RStjva1zxliwgv7pDn5SuedAdPv0P/9Zz
 XO74NrnrF8P+H/rWMNX3/kVzzabw58gzr0o/2a17sFyk+dVAb3vsjQRS+MWy/GLA
 OsiAqqRe3jC2OtyeQ053FLxacSqItBrfySPB9fGO5rpi5KOG/8ODNf3Y9Z+aWeln
 LNi7/SU4ZUbklmr8BbXRAdfCnZBrmr9+ddeP4Qg4cBtoJQUsjQHSQzXEuFQWPFNL
 L+oHkPLNw0Yqej5pJa5eoOKEH0lm0aBDivNV3zJ/0PqD2zFtNB6LQWIftOYARaz0
 CDfY0XwUdq58
 =IGYg
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
 "These revert a recent IRQ resources handling modification that turned
  out to be problematic, fix suspend-to-idle handling on AMD platforms
  to take upcoming systems into account properly and fix the retrieval
  of the DPTF attributes of the PCH FIVR.

  Specifics:

   - Revert recent change of the ACPI IRQ resources handling that
     attempted to improve the ACPI IRQ override selection logic, but
     introduced serious regressions on some systems (Hui Wang).

   - Fix up quirks for AMD platforms in the suspend-to-idle support code
     so as to take upcoming systems using uPEP HID AMDI007 into account
     as appropriate (Mario Limonciello).

   - Fix the code retrieving DPTF attributes of the PCH FIVR so that it
     agrees on the return data type with the ACPI control method
     evaluated for this purpose (Srinivas Pandruvada)"

* tag 'acpi-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: DPTF: Fix reading of attributes
  Revert "ACPI: resources: Add checks for ACPI IRQ override"
  ACPI: PM: Add support for upcoming AMD uPEP HID AMDI007
2021-07-30 15:56:24 -07:00