Commit graph

678,699 commits

Author SHA1 Message Date
Benjamin Herrenschmidt
10cbd64076 ftgmac100: Rework NAPI & interrupts handling
First, don't look at the interrupt status in the poll loop
to decide what to poll. It's wrong. If we have run out of
budget, we may still have RX packets to unqueue but no more
RX interrupt pending.

So instead move the code looking at the interrupt status
into the interrupt handler where it belongs. That avoids a slow
MMIO read in the NAPI fast path. We keep the abnormal interrupts
enabled while NAPI is scheduled.

While at it, actually do something useful in the "error" cases:

On AHB bus error, trigger the new reset task, that's about all
we can do. On RX packet fifo or descriptor overflows, we need
to restart the MAC after having freed things up. So set a flag
that NAPI will see and use to perform that restart after
harvesting the RX ring.

Finally, we shouldn't complete NAPI if there are still outgoing
packets that will need harvesting. Waiting for more interrupts
is less efficient than letting NAPI run a while longer while
the queue drains.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:38:04 -07:00
Benjamin Herrenschmidt
9b86785d1e ftgmac100: Remove useless tests in interrupt handler
The interrupt is neither enabled nor registered when the interface
isn't running (regardless of whether we use nc-si or not) so the
test isn't useful.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:38:04 -07:00
Benjamin Herrenschmidt
874b55bf62 ftgmac100: Rework MAC reset and init
The HW requires a full MAC reset when changing the speed.

Additionally the Aspeed documentation spells out that the
MAC needs to be reset twice with a 10us interval.

We thus move the speed setting and top level reset code
into a new ftgmac100_reset_and_config_mac() function which
handles both. Move the ring pointers initialization there
too in order to reflect the HW change.

Also reduce the timeout for the MAC reset as it shouldn't
take more than 300 clock cycles according to the doc.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:38:04 -07:00
Benjamin Herrenschmidt
855944ce1c ftgmac100: Add a reset task and use it for link changes
Link speed changes require a full HW reset. This isn't done
properly at the moment. It will involve delays and thus isn't
suitable to do from the link poll callback.

So let's create a reset_task that we can queue up when the
link changes. It will be useful for various cases of error
handling as well.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:38:04 -07:00
Benjamin Herrenschmidt
da40d9d4b5 ftgmac100: Move the bulk of inits to a separate function
The link monitoring and error handling code will have to
redo the ring inits and HW setup so move the code out of
ftgmac100_open() into a dedicated function.

This forces a bit of re-ordering of ftgmac100_open() but
nothing dramatic.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:38:04 -07:00
Benjamin Herrenschmidt
81f1eca663 ftgmac100: Request the interrupt only after HW is reset
The interrupt isn't shared, so this will keep it masked
until we have the HW in a known sane state.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:38:04 -07:00
Benjamin Herrenschmidt
b8dbecff9b ftgmac100: Move napi_add/del to open/close
Rather than probe/remove

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:38:04 -07:00
Benjamin Herrenschmidt
87d18757ec ftgmac100: Split ring alloc, init and rx buffer alloc
Currently, a single function is used to allocate the rings
themselves, initialize them, populate the rx ring, and
allocate the rx buffers. The same happens on free.

This splits them into separate functions. This will be
useful when properly implementing re-initialization on
link changes and error handling when the rings will be
repopulated but not freed.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:38:04 -07:00
Benjamin Herrenschmidt
5176477735 ftgmac100: Cleanup speed/duplex tracking and fix duplex config
Keep track of both the current speed and duplex settings
instead of only speed and properly apply the duplex setting
to the HW.

This reworks the adjust_link() function to also avoid trying
to reconfigure the HW when there is no link and to display
the link state to the user.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:38:04 -07:00
Benjamin Herrenschmidt
8396e1cb0b ftgmac100: Remove "enabled" flags
It's not used in any meaningful way

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:38:04 -07:00
Benjamin Herrenschmidt
831fb3388c ftgmac100: Reorder struct fields and comment
Reorder the fields in struct ftgmac in slightly more logical
groups. Will make more sense as I add/remove some.

No code change.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:38:04 -07:00
Benjamin Herrenschmidt
3f6af0eede ftgmac100: Remove "banner" comments
The divisions they represent are not particularily meaningful
and things are going to be moving around with upcoming changes
making these comments more a burden than anything else.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:38:04 -07:00
Benjamin Herrenschmidt
60b28a1167 ftgmac100: Use netdev->irq instead of private copy
There's a placeholder already for the irq, use it

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:38:04 -07:00
Dave Airlie
0e96133214 imx-drm module/dependency changes
- The PRE/PRG drivers added an unwanted DRM dependency to the ipu-v3 driver.
   Remove the dependency by conditionally disabling PRE/PRG support depending
   on CONFIG_DRM.
 - Merge the imx-ipuv3-crtc module into the imxdrm module. There is no reason
   anymore for a separation between core drm driver and crtc/plane drivers,
   especially since commit eb8c88808c ("drm/imx: add deferred plane
   disabling"), which added a dependency on imx-ipuv3-crtc to the imxdrm
   module.
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCAA1FiEEBsBxhV1FaKwXuCOBUMKIHHCeYOsFAljjxWwXHHAuemFiZWxA
 cGVuZ3V0cm9uaXguZGUACgkQUMKIHHCeYOtLHg//aoq3/r65mlsCVo5DoWH8niOo
 Po4nrCPPUbwieeG5q1kkjj/Yj8rwwPAL06GKzeeV4z1IdH1rmbNuJKbSej4EHyB9
 S1WHZ5GtZLphVGKyvPVJOPnnsrKXY/O+VhmBAX6ww56uYBqEEsrNaNREz4QB1Kqc
 JXtHBjwqO1DUJlLhJ105DutIjTendeJjQThRzjp8m95RGD1Xs6EwhtY4QLkbDRry
 DK1MXqmGlOfl0C9rLMH9b0WvtCqu8DJ8M6X+7I0C5XI9fbOXrp9SvAPafxhV/y27
 6CHmmfJiF4Wm7lNjpdDgJu5c4361S4NHiNHj0wJM+/BoplhaZliIxyuIgUY9C1Fj
 uUG5pb74lus3m2n384xDk+AWvMbTubCdIS5xCgesCHJ2E8As+7z0Wbj5HV5vP4Zy
 1j/jQaH07Yz/WgtdCQ7OYwVixFGMDnQAfTgdpiKI/d3ZD4m31lrZrvOhgQx9hF0c
 FwPQ7RWPOK5GwYDxzs/6mO4Me1kva8uXCC7HJhPBaqgbfBYDQ88JoNOf4bMVIN63
 cJxpNnUYdkVT8ViA97u7L7uUeZPhSYazdx/ncjGvjj/s5nl09ZegtgqxFSCQ8Q8n
 eLdF0dkgqQ/es4dQMChdbUUiFRIFufhFJ05cK74tPh06+jy/XSbL3XlCHOMCX8oZ
 ruyTYM0cqwGo9OqTkvc=
 =3ZIW
 -----END PGP SIGNATURE-----

Merge tag 'imx-drm-next-2017-04-04' of git://git.pengutronix.de/git/pza/linux into drm-next

imx-drm module/dependency changes

- The PRE/PRG drivers added an unwanted DRM dependency to the ipu-v3 driver.
  Remove the dependency by conditionally disabling PRE/PRG support depending
  on CONFIG_DRM.
- Merge the imx-ipuv3-crtc module into the imxdrm module. There is no reason
  anymore for a separation between core drm driver and crtc/plane drivers,
  especially since commit eb8c88808c ("drm/imx: add deferred plane
  disabling"), which added a dependency on imx-ipuv3-crtc to the imxdrm
  module.

* tag 'imx-drm-next-2017-04-04' of git://git.pengutronix.de/git/pza/linux:
  drm/imx: merge imx-drm-core and ipuv3-crtc in one module
  gpu: ipu-v3: don't depend on DRM being enabled
2017-04-07 05:34:46 +10:00
Felix Manlunas
bb54be589c liquidio: fix Octeon core watchdog timeout false alarm
Detection of watchdog timeout of Octeon cores is flawed and susceptible to
false alarms.  Refactor by removing the detection code, and in its place,
leverage existing code that monitors for an indication from the NIC
firmware that an Octeon core crashed; expand the meaning of the indication
to "an Octeon core crashed or its watchdog timer expired".  Detection of
watchdog timeout is now delegated to an exception handler in the NIC
firmware; this is free of false alarms.

Also if there's an Octeon core crash or watchdog timeout:
(1) Disable VF Ethernet links.
(2) Decrement the module refcount by an amount equal to the number of
    active VFs of the NIC whose Octeon core crashed or had a watchdog
    timeout.  The refcount will continue to reflect the active VFs of
    other liquidio NIC(s) (if present) whose Octeon cores are faultless.

Item (2) is needed to avoid the case of not being able to unload the driver
because the module refcount is stuck at some non-zero number.  There is
code that, in normal cases, decrements the refcount upon receiving a
message from the firmware that a VF driver was unloaded.  But in
exceptional cases like an Octeon core crash or watchdog timeout, arrival of
that particular message from the firmware might be unreliable.  That normal
case code is changed to not touch the refcount in the exceptional case to
avoid contention (over the refcount) with the liquidio_watchdog kernel
thread who will carry out item (2).

Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:31:56 -07:00
Maarten Lankhorst
6c5ed5ae35 drm/atomic: Acquire connection_mutex lock in drm_helper_probe_single_connector_modes, v4.
mode_valid() called from drm_helper_probe_single_connector_modes()
may need to look at connector->state because what a valid mode is may
depend on connector properties being set. For example some HDMI modes
might be rejected when a connector property forces the connector
into DVI mode.

Some implementations of detect() already lock all state,
so we have to pass an acquire_ctx to them to prevent a deadlock.

This means changing the function signature of detect() slightly,
and passing the acquire_ctx for locking multiple crtc's.
For the callbacks, it will always be non-zero. To allow callers
not to worry about this, drm_helper_probe_detect_ctx is added
which might handle -EDEADLK for you.

Changes since v1:
- Always set ctx parameter.
Changes since v2:
- Always take connection_mutex when probing.
Changes since v3:
- Remove the ctx from intel_dp_long_pulse, and add
  WARN_ON(!connection_mutex) (danvet)
- Update docs to clarify the locking situation. (danvet)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1491504920-4017-1-git-send-email-maarten.lankhorst@linux.intel.com
2017-04-06 21:29:23 +02:00
WANG Cong
92f9170621 net_sched: check noop_qdisc before qdisc_hash_add()
Dmitry reported a crash when injecting faults in
attach_one_default_qdisc() and dev->qdisc is still
a noop_disc, the check before qdisc_hash_add() fails
to catch it because it tests NULL. We should test
against noop_qdisc since it is the default qdisc
at this point.

Fixes: 59cc1f61f0 ("net: sched: convert qdisc linked list to hashtable")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:28:39 -07:00
Florian Fainelli
b73b3cde0e net: usbnet: Remove unused driver_name variable
With GCC 6.3, we can get the following warning:

drivers/net/usb/usbnet.c:85:19: warning: 'driver_name' defined but not
used [-Wunused-const-variable=]
 static const char driver_name [] = "usbnet";
                   ^~~~~~~~~~~

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:25:23 -07:00
Alexei Starovoitov
89c0a36130 selftests/bpf: fix merge conflict
fix artifact of merge resolution

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:21:59 -07:00
Dave Airlie
3eda2f5983 Merge branch 'linux-4.12' of git://github.com/skeggsb/linux into drm-next
A bit more for 4.12:
- GP10B support
- GP107 acceleration support

* 'linux-4.12' of git://github.com/skeggsb/linux: (23 commits)
  drm/nouveau/gpio: enable interrupts on cards with 32 gpio lines
  drm/nouveau/gr/gp107: initial support
  drm/nouveau/core: recognise GP10B chipset
  drm/nouveau/platform: support for probing GP10B
  drm/nouveau/platform: make VDD regulator optional
  drm/nouveau/gr: support for GP10B
  drm/nouveau/ibus: add GP10B support
  drm/nouveau/mc: add GP10B support
  drm/nouveau/fb: add GP10B support
  drm/nouveau/fifo: add GP10B support
  drm/nouveau/msgqueue: support for GP10B PMU firmware
  drm/nouveau/secboot: add GP10B support
  drm/nouveau/secboot/gm20b: specify MC base address as argument
  drm/nouveau/secboot: start LS firmware in post-run hook
  drm/nouveau/secboot: let LS post_run hooks return error
  drm/nouveau/secboot: pass instance to LS firmware loaders
  drm/nouveau/secboot: allow to boot multiple falcons
  drm/nouveau/imem/gk20a: Turn instmem lock into mutex
  drm/nouveau: initial support (display-only) for GP107
  drm/nouveau/kms/nv50: fix double dma_fence_put() when destroying plane state
  ...
2017-04-07 05:20:06 +10:00
Florian Larysch
a8801799c6 net: ipv4: fix multipath RTM_GETROUTE behavior when iif is given
inet_rtm_getroute synthesizes a skeletal ICMP skb, which is passed to
ip_route_input when iif is given. If a multipath route is present for
the designated destination, ip_multipath_icmp_hash ends up being called,
which uses the source/destination addresses within the skb to calculate
a hash. However, those are not set in the synthetic skb, causing it to
return an arbitrary and incorrect result.

Instead, use UDP, which gets no such special treatment.

Signed-off-by: Florian Larysch <fl@n621.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:18:56 -07:00
Al Viro
3448890c32 powerpc: get rid of zeroing, switch to RAW_COPY_USER
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-06 15:08:42 -04:00
Al Viro
f2ed8bebee Merge commit 'a7d2475af7' into uaccess.powerpc
backmerge of sorting the arch/powerpc/Kconfig
2017-04-06 15:08:10 -04:00
Mathias Krause
86e1066fe2 sparc: remove unused wp_works_ok macro
It's unused for ages, used to be required for ksyms.c back in the v1.1
times.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:03:30 -07:00
Guenter Roeck
9d262d9511 sparc32: Export vac_cache_size to fix build error
sparc32:allmodconfig fails to build with the following error.

ERROR: "vac_cache_size" [drivers/infiniband/sw/rxe/rdma_rxe.ko] undefined!

Fixes: cb88645596 ("infiniband: Fix alignment of mmap cookies ...")
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Doug Ledford <dledford@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:03:30 -07:00
Nitin Gupta
76811263b3 sparc64: Fix memory corruption when THP is enabled
The memory corruption was happening due to incorrect
TLB/TSB flushing of hugepages.

Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:03:30 -07:00
Tom Hromatka
9ae34dbd8a sparc64: Fix kernel panic due to erroneous #ifdef surrounding pmd_write()
This commit moves sparc64's prototype of pmd_write() outside
of the CONFIG_TRANSPARENT_HUGEPAGE ifdef.

In 2013, commit a7b9403f0e ("sparc64: Encode huge PMDs using PTE
encoding.") exposed a path where pmd_write() could be called without
CONFIG_TRANSPARENT_HUGEPAGE defined.  This can result in the panic below.

The diff is awkward to read, but the changes are straightforward.
pmd_write() was moved outside of #ifdef CONFIG_TRANSPARENT_HUGEPAGE.
Also, __HAVE_ARCH_PMD_WRITE was defined.

kernel BUG at include/asm-generic/pgtable.h:576!
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/
oracle_8114_cdb(8114): Kernel bad sw trap 5 [#1]
CPU: 120 PID: 8114 Comm: oracle_8114_cdb Not tainted
4.1.12-61.7.1.el6uek.rc1.sparc64 #1
task: fff8400700a24d60 ti: fff8400700bc4000 task.ti: fff8400700bc4000
TSTATE: 0000004411e01607 TPC: 00000000004609f8 TNPC: 00000000004609fc Y:
00000005    Not tainted
TPC: <gup_huge_pmd+0x198/0x1e0>
g0: 000000000001c000 g1: 0000000000ef3954 g2: 0000000000000000 g3: 0000000000000001
g4: fff8400700a24d60 g5: fff8001fa5c10000 g6: fff8400700bc4000 g7: 0000000000000720
o0: 0000000000bc5058 o1: 0000000000000240 o2: 0000000000006000 o3: 0000000000001c00
o4: 0000000000000000 o5: 0000048000080000 sp: fff8400700bc6ab1 ret_pc: 00000000004609f0
RPC: <gup_huge_pmd+0x190/0x1e0>
l0: fff8400700bc74fc l1: 0000000000020000 l2: 0000000000002000 l3: 0000000000000000
l4: fff8001f93250950 l5: 000000000113f800 l6: 0000000000000004 l7: 0000000000000000
i0: fff8400700ca46a0 i1: bd0000085e800453 i2: 000000026a0c4000 i3: 000000026a0c6000
i4: 0000000000000001 i5: fff800070c958de8 i6: fff8400700bc6b61 i7: 0000000000460dd0
I7: <gup_pud_range+0x170/0x1a0>
Call Trace:
 [0000000000460dd0] gup_pud_range+0x170/0x1a0
 [0000000000460e84] get_user_pages_fast+0x84/0x120
 [00000000006f5a18] iov_iter_get_pages+0x98/0x240
 [00000000005fa744] do_direct_IO+0xf64/0x1e00
 [00000000005fbbc0] __blockdev_direct_IO+0x360/0x15a0
 [00000000101f74fc] ext4_ind_direct_IO+0xdc/0x400 [ext4]
 [00000000101af690] ext4_ext_direct_IO+0x1d0/0x2c0 [ext4]
 [00000000101af86c] ext4_direct_IO+0xec/0x220 [ext4]
 [0000000000553bd4] generic_file_read_iter+0x114/0x140
 [00000000005bdc2c] __vfs_read+0xac/0x100
 [00000000005bf254] vfs_read+0x54/0x100
 [00000000005bf368] SyS_pread64+0x68/0x80

Signed-off-by: Tom Hromatka <tom.hromatka@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 12:03:29 -07:00
David S. Miller
0e4c0ee580 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2017-04-06 11:57:04 -07:00
Charles Keepax
f7d37bc3cb regulator: helpers: Add regmap set_pull_down helper
Add a helper function regulator_set_pull_down_regmap to allow regmap
based regulators to easily enable pull down.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 19:29:37 +01:00
Charles Keepax
a7a453f56a regulator: helpers: Add regmap set_soft_start helper
Add a helper function regulator_set_soft_start_regmap to allow regmap
based regulators to easily enable soft start.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 19:29:37 +01:00
Arnaud Pouliquen
d05d862ead ASoC: STI: Fix null ptr deference in IRQ handler
With RTlinux a race condition has been found that leads to NULL ptr crash:
- On CPU 0: uni_player_irq_handler is called to treat XRUN
 "(player->state == UNIPERIF_STATE_STOPPED)" is FALSE so status is checked,
 dev_err(player->dev, "FIFO underflow error detected") is printed
and then snd_pcm_stream_lock should be called to lock stream for stopping.
- On CPU 1: application stop and close the stream.
Issue is that the stop and shutdown functions are executed while
"FIFO underflow error detected" is printed.
So when CPU 0 calls snd_pcm_stream_lock, player->substream is already null.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 19:29:07 +01:00
Charles Keepax
0c67fb5544 ASoC: cs35l35: Add DT binding to specify usage of an external boost supply
Add a device tree binding to let the driver know that the amplifier is
configured to use an external boost supply.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 19:27:59 +01:00
Charles Keepax
77b329d194 ASoC: cs35l35: Correct handling of PDN_DONE with external boost
When using an external boost supply the PDN_DONE bit is not set, update
the handling in this case to use to use an appropriate fixed delay.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 19:27:56 +01:00
Charles Keepax
2c84afb52e ASoC: cs35l35: Improve power down time
Shorten the time it takes to power down the amp by disabling the volume
ramp whilst doing the final shutdown. The driver has already muted the
amplifier at this stage so doing the volume ramp serves no purpose.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 19:27:52 +01:00
Daniel Baluta
303e8954af ASoC: codec: wm8960: Stop when a matching PLL freq is found
When a matching PLL freq is found, searching continues even this is
not necessary. The problem was introduced with the following refactoring
commit 84fdc00d51 ("ASoC: codec: wm9860: Refactor PLL out freq search)

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 19:26:41 +01:00
Ryan Lee
7c0c200071 ASoC: Add support for Maxim Integrated MAX98927 Amplifier
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 19:25:57 +01:00
Alex Xie
f4e7c7c1b4 drm/amdgpu: use uintptr_t instead of unsigned long to store pointer
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-06 13:28:08 -04:00
Alex Xie
ec2c467efe drm/amdgpu: Avoid using signed integer to store pointer value
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-06 13:28:07 -04:00
Monk Liu
81758c5595 drm/amdgpu:invoke new implemented AI MB func
Implement the sr-iov mailbox for soc15 asics.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-06 13:28:07 -04:00
Monk Liu
8758cb6a96 drm/amdgpu/vega10:timeout set to equal with VI
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-06 13:28:06 -04:00
Monk Liu
f98b617ed5 drm/amdgpu:implement the reset MB func for vega10
they are lack in the bringup stage, we need them for GPU reset
feature.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-06 13:28:05 -04:00
Monk Liu
94b4fd725b drm/amdgpu:fix typo for mxgpu_ai
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-06 13:28:05 -04:00
Monk Liu
377e275946 drm/amdgpu:no need to involv HDP in KIQ
1,KIQ won't touch VRAM so no need to involv HDP flush/invalidate at all.
2,According to CP hw designer KIQ better not use any PM4 package lead to wait behave.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-06 13:28:04 -04:00
Monk Liu
bb5c9ca588 drm/amdgpu:add PSP block only load_type=PSP (v2)
SRIOV currently only can load ucode directly, and PSP
block is not supported by VF temporarily.

will remove this restrict and use PSP load all ucode
even for SRIOV later

v2: squash in check against module parameter

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-06 13:28:04 -04:00
Evan Quan
ba8a21cfbc drm/amdgpu/smu9: update to latest driver interface
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-06 13:27:26 -04:00
Tom St Denis
40f0677337 drm/amd/amdgpu: cleanup gfx_v9_0_gpu_init()
Use new WREG32_FIELD15 macro

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-06 13:27:26 -04:00
Tom St Denis
596c8e8b7f drm/amd/amdgpu: cleanup gfx_v9_0_rlc_reset()
Use new WREG32_FIELD15 macro

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-06 13:27:25 -04:00
Tom St Denis
342cda2522 drm/amd/amdgpu: cleanup gfx_v9_0_rlc_start()
Use new WREG32_FIELD15 macro

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-06 13:27:25 -04:00
Tom St Denis
ea64468e36 drm/amd/amdgpu: simplify gfx_v9_0_cp_gfx_enable()
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-06 13:27:24 -04:00
Tom St Denis
72edadd53e drm/amd/amdgpu: cleanup gfx_v9_0_kiq_init_register()
Use new WREG32_FIELD macro

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-06 13:27:24 -04:00