The code for this never went upstream. It was replaced by other code,
so this should be dropped.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216748
Fixes: cf996f0396 ("iio: test: test gain-time-scale helpers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Be consistent and use dev_err_probe() as in all other places in the
.probe() path.
While at it, remove the line break in the version condition. Yes, it
goes over the 80 column limit but I do think the line break hurts
readability in this case.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use a local struct device variable to improve readability in some code
paths during probe. While at it, fix some line breaks not properly
aligned to the open parenthesis.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simplify the probe function by using a local 'dev' variable instead of
full pointer dereference. This makes several lines shorter, which
allows to avoid wrapping making code more readable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simplify the probe function by using local 'dev' and 'np' variables
instead of full pointer dereferences. This makes several lines shorter,
which allows to avoid wrapping making code more readable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simplify the probe function by using local 'dev' and 'np' variables
instead of full pointer dereferences. This makes several lines shorter,
which allows to avoid wrapping making code more readable. While
touching the return line, simplify by avoiding unnecessary 'ret'
assignment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When gp0 or gp1 is not taken as an interrupt, expose them as GPO if
gpio-contoller is set in the devicetree. gpio-regmap is not used
because the GPO static low is 'b101 and static high is 0b110; low state
requires setting bit 0, not fitting the abstraction of low=0 and
high=mask.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Explains the GPIO controller support with emphasis on the mask
depending on which GPs are exposed.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adds support for IIO Events. Optionally, gp0 is assigned as Threshold
Either signal, if not present, fallback to an I3C IBI with the same
role.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adds support for IIO Trigger. Optionally, gp1 is assigned as Data Ready
signal, if not present, fallback to an I3C IBI with the same role.
The software trigger is allocated by the device, but must be attached by
the user before enabling the buffer. The purpose is to not impede
removing the driver due to the increased reference count when
iio_trigger_set_immutable() or iio_trigger_get() is used.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Explains the IIO Trigger support and timings involved.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds a new page to document how to use the ad4062 ADC driver.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add dt-bindings for AD4062 family, devices AD4060/AD4062, low-power with
monitor capabilities SAR ADCs. Each variant of the family differs in
resolution. The device contains two outputs (gp0, gp1). The outputs can
be configured for range of options, such as threshold and data ready.
The device uses a 2-wire I3C interface.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is the iio driver for Microchip MCP47F(E/V)B(0/1/2)1,
MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and MCP47F(E/V)B(0/1/2)8 series
of buffered voltage output Digital-to-Analog Converters with nonvolatile or
volatile memory and an I2C Interface.
The families support up to 8 output channels.
The devices can be 8-bit, 10-bit and 12-bit.
Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is the device tree schema for iio driver for Microchip
MCP47F(E/V)B(0/1/2)1, MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and
MCP47F(E/V)B(0/1/2)8 series of buffered voltage output Digital-to-Analog
Converters with nonvolatile or volatile memory and an I2C Interface.
The families support up to 8 output channels.
The devices can be 8-bit, 10-bit and 12-bit.
Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
bitmap_full() is less verbose and more efficient, as it stops traversing
scan_mask as soon as the 1st unset bit found.
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unnecessary blank lines between comment sections to improve
readability.
Signed-off-by: Tomas Borquez <tomasborquez13@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add mmc5633 sensor basic support.
- Support read 20 bits X/Y/Z magnetic.
- Support I3C HDR mode to send start measurememt command.
- Support I3C HDR mode to read all sensors data by one command.
Co-developed-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Co-developed-by: Adrian Fluturel <fluturel.adrian@gmail.com>
Signed-off-by: Adrian Fluturel <fluturel.adrian@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add compatible string 'memsic,mmc5603' and 'memsic,mmc5633' for
MEMSIC 3-axis magnetometer.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add ti-ads1018 driver for Texas Instruments ADS1018 and ADS1118 SPI
analog-to-digital converters.
This chips' MOSI pin is shared with a data-ready interrupt. Defining
this interrupt in devicetree is optional, therefore we only create an
IIO trigger if one is found.
Handling this interrupt requires some considerations. When enabling the
trigger the CS line is tied low (active), thus we need to hold
spi_bus_lock() too, to avoid state corruption. This is done inside the
set_trigger_state() callback, to let users use other triggers without
wasting a bus lock.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add documentation for Texas Instruments ADS1018 and ADS1118
analog-to-digital converters.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Delete iio_device_claim_direct_mode() when reading temperature.
It enables polling of temperature data while buffer is on and it
doesn't have any impact on the other sensors.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Allow the user to select either the SPI or the i2c bus specific
module and autoselect core if needed.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Timestamps were already written to the buffer in
scd4x_trigger_handler(), this patch makes them available as a channel.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use dev_err_probe() to make error code handling simpler and handle
deferred probe nicely (avoid spamming logs).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use dev_err_probe() to make error code handling simpler and handle
deferred probe nicely (avoid spamming logs).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use dev_err_probe() to make error code handling simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use dev_err_probe() to make error code handling simpler and handle
deferred probe nicely (avoid spamming logs).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use dev_err_probe() to make error code handling simpler and handle
deferred probe nicely (avoid spamming logs).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Just making sure checkpatch is happy. No functional change intended.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make use of the cleanup.h API for locks in order to simplify some code
paths.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Just making sure checkpatch is happy. No functional change intended.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio_dma_buffer_init() always return 0. Therefore there's no point in
returning int.
While at it, fix a mismatch between the function declaration and definition
regarding the struct device (dma_dev != dev).
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make use of the cleanup.h API for locks and memory allocation in order
to simplify some code paths.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Don't use mutex_is_locked() + WARN_ON() for checking if a specif lock is
taken. Instead use the existing annotations which means
lockdep_assert_held().
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There's no point in having a ret variable and checking for errors (as we
do nothing with it). Instead, save some lines of code and directly
return the devm_add_action_or_reset() call.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Be consistent and use dev_err_probe() as in all other places in the
.probe() path.
While at it, remove the line break in the version condition. Yes, it
goes over the 80 column limit but I do think the line break hurts
readability in this case. And use a struct device *dev helper for
neater code.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adds driver for digital Honeywell ABP2 series of board mount
pressure and temperature sensors.
This driver covers 113 different pressure ranges and units on
both i2c and SPI buses.
The communication protocol involves sending two simple commands
to the sensor and there is no register access or a memory map.
For this reason the regmap API was not used.
The i2c address is hardcoded and depends on the part number.
Optional end of conversion interrupt control is present on the
i2c variants of the chips.
The EOC can also be defined for the SPI variants if a non-ABP2
but compatible chip is to be driven.
Tested on two sensors (ABP2MRRT001PDSA3 and ABP2DANT001BA2A3).
ocuments/sps-siot-abp2-series-datasheet-32350268-en.pdf
Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/basic-abp2-series/d
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adds binding for digital Honeywell ABP2 series pressure and temperature
sensors.
The i2c address is hardcoded and depends on the part number.
There is an optional interrupt that signals the end of conversion.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD9211 is a 10-bit monolithic sampling analog-to-digital converter
optimized for high performance, low power, and ease of use. The product
operates at up to a 300 MSPS conversion rate and is optimized for
outstanding dynamic performance in wideband carrier and broadband systems.
The scale table implemented here is not an exact match with the
datasheet as the table presented there is missing some information.
The reference presents these values as being linear,
but that does not add up. There is information missing in the table.
Implemented scale table matches values at the middle and at the ends,
smoothing the curve towards middle and end.
Impact on end result from deviation in scale factor affects only software
using it for scaling. All the possible hw-settings are also available with
this implementation.
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD9211.pdf
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Include headers in ascending order.
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This device has e.g. different scaling values than currently
listed devices.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The device has interrupts allocated according to the datasheet, and
the devicetree already defines the interrupt property. Address existing
warnings by allowing the property.
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for adl8113 10MHz to 12GHz Low Noise Amplifier with
10MHz to 14GHz bypass switches.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add devicetree bindings for the ADL8113 Low Noise Amplifier.
The bindings include support for specifying gain values of external
amplifiers connected to the two external bypass paths (A and B). These
optional properties allow the gain values to be selectable via the
hardwaregain attribute, enabling complete devicetree description of
the signal chain including external components.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add clk provider feature for the adf4377.
Even though the driver was sent as an IIO driver in most cases the
device is actually seen as a clock provider.
This patch aims to cover actual usecases requested by users in order to
completely control the output frequencies from userspace.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The NXP S32G2 and S32G3 platforms integrate a successive approximation
register (SAR) ADC. Two instances are available, each providing 8
multiplexed input channels with 12-bit resolution. The conversion rate
is up to 1 Msps depending on the configuration and sampling window.
The SAR ADC supports raw, buffer, and trigger modes. It can operate
in both single-shot and continuous conversion modes, with optional
hardware triggering through the cross-trigger unit (CTU) or external
events. An internal prescaler allows adjusting the sampling clock,
while per-channel programmable sampling times provide fine-grained
trade-offs between accuracy and latency. Automatic calibration is
performed at probe time to minimize offset and gain errors.
All modes have been validated on the S32G274-RDB2 platform using an
externally generated square wave captured by the ADC. Tests covered
buffered streaming via IIO, trigger synchronization, and accuracy
verification against a precision laboratory signal source.
One potential scenario, not detected during testing, is that in some
corner cases the DMA may already have been armed for the next
transfer, which can lead dmaengine_tx_status() to return an incorrect
residue. The callback_result() operation—intended to supply the
residue directly and eliminate the need to call
dmaengine_tx_status()—also does not work. Attempting to use
dmaengine_pause() and dmaengine_resume() to prevent the residue from
being updated does not work either.
This potential scenario should apply to any driver using cyclic DMA.
However, no current driver actually handles this case, and they all rely
on the same acquisition routine (e.g., the STM32 implementation).
The NXP SAR acquisition routine has been used in production for several
years, which is a good indication of its robustness.
As the IIO is implementing the cyclic DMA support API, it is not worth
to do more spins to the current routine as it will go away when the
new API will be available.
The driver is derived from the BSP implementation and has been partly
rewritten to comply with upstream requirements. For this reason, all
contributors to the original code are listed as co-developers.
Originally-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
Co-developed-by: Alexandru-Catalin Ionita <alexandru-catalin.ionita@nxp.com>
Signed-off-by: Alexandru-Catalin Ionita <alexandru-catalin.ionita@nxp.com>
Co-developed-by: Ciprian Costea <ciprianmarian.costea@nxp.com>
Signed-off-by: Ciprian Costea <ciprianmarian.costea@nxp.com>
Co-developed-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
