for 7.1, please pull the following:
- Maira adds the V3D DT node to the 2712 (Raspberry Pi 5) SoC
- Gergor adds the I2C controller, CSI (camera), ISP (image signal
processor), fixes the pinctrl node and updates the UART10 interrupt
for the RP1 sister chip to the 2712 (Raspberry Pi 5)
- Rob moves the firmware and GPU to the root level to fix DTC warnings
-----BEGIN PGP SIGNATURE-----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=9Bck
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=AREl
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-7.1/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 7.1, please pull the following:
- Maira adds the V3D DT node to the 2712 (Raspberry Pi 5) SoC
- Gergor adds the I2C controller, CSI (camera), ISP (image signal
processor), fixes the pinctrl node and updates the UART10 interrupt
for the RP1 sister chip to the 2712 (Raspberry Pi 5)
- Rob moves the firmware and GPU to the root level to fix DTC warnings
* tag 'arm-soc/for-7.1/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm2712: Move non simple-bus nodes to root level
arm64: dts: broadcom: bcm2712-d-rpi-5-b: update uart10 interrupt
arm64: dts: broadcom: bcm2712-d-rpi-5-b: add fixes for pinctrl/pinctrl_aon
arm64: dts: broadcom: bcm2712-rpi-5-b: add pinctrl properties for csi i2cs
arm64: dts: broadcom: bcm2712: add camera backend node pispbe
arm64: dts: broadcom: rp1: add csi nodes
arm64: dts: broadcom: rp1: add i2c controller
arm64: dts: broadcom: bcm2712: Add V3D device node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 7.1, please pull the following:
- Rafal provides a complete description of the PCIe Root Complex nodes
in order to silence a number of dtc warnings
- Rosen provides the necessary NVMEM properties to allow describing the
WAN device MAC address from NVRAM, also adds better LEDs, USB GPIOs
and Wi-Fi buttons for the Linksys EA9200 router
- Linus completes the BCA devices description by adding the I2C block
and fixing interrupts for the DMA block on 63138 and 6878
-----BEGIN PGP SIGNATURE-----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=ITzn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=KEH/
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-7.1/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 7.1, please pull the following:
- Rafal provides a complete description of the PCIe Root Complex nodes
in order to silence a number of dtc warnings
- Rosen provides the necessary NVMEM properties to allow describing the
WAN device MAC address from NVRAM, also adds better LEDs, USB GPIOs
and Wi-Fi buttons for the Linksys EA9200 router
- Linus completes the BCA devices description by adding the I2C block
and fixing interrupts for the DMA block on 63138 and 6878
* tag 'arm-soc/for-7.1/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: EA9200: specify partitions
ARM: dts: BCM5301X: EA9200: add LEDs
ARM: dts: BCM5301X: EA9200: add USB GPIOs
ARM: dts: BCM5301X: EA9200: add WiFi button
ARM: dts: broadcom: bcm2835-rpi: Move non simple-bus nodes to root level
ARM: dts: bcm63148: Add I2C block
ARM: dts: bcm63138: Add I2C block
ARM: dts: bcm6878: Add I2C bus block
ARM: dts: bcm6855: Add I2C bus blocks
ARM: dts: bcm6846: Add I2C bus block
ARM: dts: bcm63138: Fix DMA IRQ
ARM: dts: bcm6878: Fix PL081 DMA block IRQ
ARM: dts: BCM5301X: AC5300: set WAN MAC from nvram
ARM: dts: BCM5301X: AC3100: set WAN MAC from nvram
ARM: dts: BCM5301X: panamera: set WAN MAC from nvram
ARM: dts: BCM5301X: EA9200: set WAN MAC from nvram
ARM: dts: BCM5301X: add root pcie bridges
ARM: dts: BCM5301X: Drop extra NAND controller compatible
ARM: dts: BCM5301X: Describe PCIe controllers fully
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Just the one change this time, dropping syscon properties where they weren't
defined.
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCacSlrxwcYW5kcmV3QGNv
ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGmeIIA/0m24mZm/Ld0Nhu9Kphg
sz1rXcl1/0O9ryEJjIN+jfuRAP9RFCU07YOupuAL4mr+XTOj5b7SIMgxmBlC+hOt
ql1WAA==
=cbw6
-----END PGP SIGNATURE-----
Merge tag 'nuvoton-arm64-7.1-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
nuvoton: first batch of arm64 devicetree changes for v7.1
Just the one change this time, dropping syscon properties where they weren't
defined.
* tag 'nuvoton-arm64-7.1-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
arm64: dts: nuvoton: drop unused syscon property from watchdog node
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
1. The primary addition is initial support for Zena CSS that includes:
a new binding compatibility, a shared `zena-css.dtsi` description, and
an FVP device tree.
2. Extension of Corstone-1000 FVP platform support with binding updates
to add the new `arm,corstone1000-a320-fvp` platform, and the
`arm,corstone1000-ethos-u85` NPU integration.
Overall, this combines new platform enablement with some DTS layout
cleanup for Arm reference FVP based systems.
-----BEGIN PGP SIGNATURE-----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=pqOI
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
Armv8 Juno/FVP/Vexpress updates for v7.1
1. The primary addition is initial support for Zena CSS that includes:
a new binding compatibility, a shared `zena-css.dtsi` description, and
an FVP device tree.
2. Extension of Corstone-1000 FVP platform support with binding updates
to add the new `arm,corstone1000-a320-fvp` platform, and the
`arm,corstone1000-ethos-u85` NPU integration.
Overall, this combines new platform enablement with some DTS layout
cleanup for Arm reference FVP based systems.
* tag 'juno-updates-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: arm/corstone1000: Add corstone-1000-a320
arm64: dts: arm/corstone1000: Move FVP peripherals to separate .dtsi
arm64: dts: arm/corstone1000: Move cpu nodes
dt-bindings: npu: arm,ethos: Add "arm,corstone1000-ethos-u85"
dt-bindings: arm,corstone1000: Add "arm,corstone1000-a320-fvp"
arm64: dts: zena: Move SRAM into SoC and memory node out of SoC
arm64: dts: zena: Add support for Zena CSS
dt-bindings: arm: Add Zena CSS compatibility
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This adds a single commit fixing a dtbs_check validation error
by changing the fallback compatible of the efuse node to the
correct one in MT7623.
-----BEGIN PGP SIGNATURE-----
iLoEABYKAGIWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCab0HMxsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDIoHGFuZ2Vsb2dpb2FjY2hpbm8uZGVscmVnbm9AY29s
bGFib3JhLmNvbQAKCRCaNgTPrZeEeNJwAPkBRF11j20Sv1+TNdqwcxuHr8WEVq4d
xMZbg6uqTURiSQEApsHSJSRrPjGSlt4sIyAtKcWcQigfM0zqf63UbEGPZA8=
=NeiC
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts32-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM32 Device Tree Updates
This adds a single commit fixing a dtbs_check validation error
by changing the fallback compatible of the efuse node to the
correct one in MT7623.
* tag 'mtk-dts32-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
ARM: dts: mediatek: mt7623: fix efuse fallback compatible
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This adds fixes and improvements for already supported devices.
In particular:
- The gpio-ranges pin could was fixed in MT6795, MT7981B, and
MT7986A SoCs, as the very last GPIO was unusable; Even though
anyway unused, this fixes the hardware description.
- Model string fixes for Bananapi BPI-R4 Pro 4E/8X: now the
correct model is shown.
- The MT6359 PMIC gets disambiguation for two default regulator
names, mainly fixing issues seen on U-Boot, but also making
the regulators visually distinguishable in a summary...!
- Aliases for eMMC/SD controllers added in MT8365 EVK board,
MT8395 Radxa NIO-12L and Genio 1200 for consistency
- Fixes to the MediaTek AUDSYS devicetree binding
....and honorable mention goes to:
- MT8195 Cherry Chromebooks get their WiFi on PCI Express and
Bluetooth on USB described with the proper power supplies now
tied to the correct devices (USB VBUS and PCIE3v3): this is
now described almost perfectly, or at least links the right
resources in the right places.
This is also done as a preparation for when the M.2 E-Key
connector binding will be upstreamed.
- MT8195 Cherry Dojo gets its M.2 M-Key slot correctly described
with the new pcie-m2-m-connector binding.
-----BEGIN PGP SIGNATURE-----
iLoEABYKAGIWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCab0LcxsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDIoHGFuZ2Vsb2dpb2FjY2hpbm8uZGVscmVnbm9AY29s
bGFib3JhLmNvbQAKCRCaNgTPrZeEeAt6AP9balK82Qvh3mswEasjVnOy3+nQDK13
CAGOZrjxCvisPwD/aLDqYCaev2u97jprUho9tVQk0EAT6fzWIOTJESEDqgA=
=uxBh
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts64-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates
This adds fixes and improvements for already supported devices.
In particular:
- The gpio-ranges pin could was fixed in MT6795, MT7981B, and
MT7986A SoCs, as the very last GPIO was unusable; Even though
anyway unused, this fixes the hardware description.
- Model string fixes for Bananapi BPI-R4 Pro 4E/8X: now the
correct model is shown.
- The MT6359 PMIC gets disambiguation for two default regulator
names, mainly fixing issues seen on U-Boot, but also making
the regulators visually distinguishable in a summary...!
- Aliases for eMMC/SD controllers added in MT8365 EVK board,
MT8395 Radxa NIO-12L and Genio 1200 for consistency
- Fixes to the MediaTek AUDSYS devicetree binding
....and honorable mention goes to:
- MT8195 Cherry Chromebooks get their WiFi on PCI Express and
Bluetooth on USB described with the proper power supplies now
tied to the correct devices (USB VBUS and PCIE3v3): this is
now described almost perfectly, or at least links the right
resources in the right places.
This is also done as a preparation for when the M.2 E-Key
connector binding will be upstreamed.
- MT8195 Cherry Dojo gets its M.2 M-Key slot correctly described
with the new pcie-m2-m-connector binding.
* tag 'mtk-dts64-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: dts: mediatek: mt7986a: Fix gpio-ranges pin count
arm64: dts: mediatek: mt7981b: Fix gpio-ranges pin count
arm64: dts: mediatek: mt6795: Fix gpio-ranges pin count
dt-bindings: arm: mediatek: audsys: fix formatting issues
arm64: dts: mediatek: mt8195-cherry-dojo: Describe M.2 M-key NVMe slot
arm64: dts: mediatek: mt8195-cherry: add WiFi PCIe and BT USB power supplies
arm64: dts: mediatek: mt7988a-bpi-r4pro: fix model string
arm64: dts: mt8167: Reorder nodes according to mmio address
arm64: dts: mediatek: mt6359: give regulators unique names
arm64: dts: mediatek: mt8365: Describe infracfg-nao as a pure syscon
arm64: dts: mediatek: mt8365-evk: add mmc aliases
arm64: dts: mediatek: mt8395-radxa-nio-12l: add mmc aliases
arm64: dts: mediatek: mt8395-genio-common: add mmc aliases
arm64: dts: mediatek: mt8195-cherry: Disable xhci1 completely
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Update the T-Head TH1520 RISC-V SoC device tree to support the
Verisilicon DC8200 display controller (called DPU in manual) and the
Synopsys DesignWare HDMI TX controller. In addition, enable HDMI output
for the LicheePi 4a board.
Signed-off-by: Drew Fustini <fustini@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQSy8G7QpEpV9aCf6Lbb7CzD2SixDAUCabbfiAAKCRDb7CzD2Six
DFM4APUQJw9Pua59fb4vMqmvRZC9CJ2F6l726Fx7LCjtQXEYAP9rIWyX0npi6DX9
aHrvuRB8WDLGRsMF5dFO++aHy/PQAg==
=z1x0
-----END PGP SIGNATURE-----
Merge tag 'thead-dt-for-v7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux into soc/dt
T-HEAD Devicetrees for 7.1
Update the T-Head TH1520 RISC-V SoC device tree to support the
Verisilicon DC8200 display controller (called DPU in manual) and the
Synopsys DesignWare HDMI TX controller. In addition, enable HDMI output
for the LicheePi 4a board.
* tag 'thead-dt-for-v7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux:
riscv: dts: thead: lichee-pi-4a: enable HDMI
riscv: dts: thead: add DPU and HDMI device tree nodes
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Corstone-1000-a320 is a Corstone-1000 derivative with Cortex-A320 cores,
GIC-600, and Ethos-U85 NPU.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Message-Id: <20260320-dt-corstone1000-a320-v1-5-a549dfcfe8da@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
The FVPs have a common set of peripherals specific to the FVP. Move
these to a separate .dtsi so they can be shared across FVP platforms.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Message-Id: <20260320-dt-corstone1000-a320-v1-4-a549dfcfe8da@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
In preparation to add a new Corstone-1000 variation with different CPUs,
move the CPU nodes into the specific platforms and out of the common
corstone1000.dtsi.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Message-Id: <20260320-dt-corstone1000-a320-v1-3-a549dfcfe8da@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
The Corstone-1000-A320 platform contains an Ethos-U85 NPU. Add a
specific compatible for it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Message-Id: <20260320-dt-corstone1000-a320-v1-2-a549dfcfe8da@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
The Arm Corstone1000-A320 is a variation of the Corstone1000 with
Cortex-A320 cores and an Ethos-U85 NPU. An FVP for the platform is
available here[1].
[1] https://developer.arm.com/Tools%20and%20Software/Fixed%20Virtual%20Platforms/IoT%20FVPs
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Message-Id: <20260320-dt-corstone1000-a320-v1-1-a549dfcfe8da@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
New soc-peripherals: DisplayPort on RK3576
New overlays: TSx33 device-revisions, HD702E display/touchscreen on
NanoPC-T4
And as always a number of per-board changes for added or enabled
peripherals, added supplies, things moved to more fitting positions.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmm1qxoQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgdocB/9b7sEh6/7F7n8BjGcywzGj4btk0S2to4EO
gCbiIpv4+9OdPZWFTca/BIQkj9fRkeD3zKfH5wkh2mnDWvp8MVWSqklAOxy7KdCO
zVVSjpIUiG7EEBlpefPy8solLm6A/A/mvBcYcLxxTzn8F24iWM4lzLPlmIbNkJ71
SzIwnJ4h1d4VqW4pIWXAZcAPuoX8IF/p3u47/fFLdA22FDKeeOvY3uEz36TrMeqj
l54pRxNT0VD4KTEYBmVu9eMiB5jgonlBboLX0Sihq2Jp5mBT+SLUmn4Le2sjsSAn
hVQOLwMQECifw6V1lXM1rj8lkzWyWpNTU4veV2gVza43e+dJzYQL
=ix/w
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: RK3576-EVB2, OneThing Edge Cube
New soc-peripherals: DisplayPort on RK3576
New overlays: TSx33 device-revisions, HD702E display/touchscreen on
NanoPC-T4
And as always a number of per-board changes for added or enabled
peripherals, added supplies, things moved to more fitting positions.
* tag 'v7.1-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (28 commits)
arm64: dts: rockchip: enable vicap dvp on wolfvision pf5 io expander
arm64: dts: rockchip: Add analog audio switches to RK3576 EVB1
arm64: dts: rockchip: Enable GPU on rk3566-pinenote
arm64: dts: rockchip: Make Jaguar PCIe-refclk pin use pull-up config
arm64: dts: rockchip: add pinctrl for clk-generator GPIO on rk3588-tiger
arm64: dts: rockchip: use gated-fixed-clock for pcie-refclk on rk3588-tiger
arm64: dts: rockchip: use gated-fixed-clock for pcie-refclk on rk3588-jaguar
arm64: dts: rockchip: Enable displayport for rk3576 evb2
arm64: dts: rockchip: Add battery and charger on rk3566-pinenote
arm64: dts: rockchip: Fix sdmmc pwren pinctrl for rk3576-evb2
arm64: dts: rockchip: Describe HDMI supplies for nanopi4 boards
arm64: dts: rockchip: Clean up NanoPi-R2S Plus gmac2io
arm64: dts: rockchip: add pwm-fan for NanoPC-T6
arm64: dts: rockchip: Add rk3576 evb2 board
dt-bindings: arm: rockchip: Add rk3576 evb2 board
arm64: dts: rockchip: Add overlay for FriendlyElec HD702E
arm64: dts: rockchip: Move RK3399 eDP pinctrl to boards
arm64: dts: rockchip: add overlay for qnap-ts133 device revision
arm64: dts: rockchip: add overlay for qnap-ts233 device revision
arm64: dts: rockchip: add overlay for qnap-ts433 device revision
...
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The 'gpu' and 'firmware' nodes are not MMIO devices, so they should not be
under a 'simple-bus'. Additionally, the "raspberrypi,bcm2835-power" node
is part of the firmware, so move it under the 'rpi-firmware' node.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260320154809.1246064-1-robh@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The BCM63148 has a brcmper I2C block.
The peripheral range needs to be extended to accommodate
it. The Boot LUT is at offset + 0x10000 so extend it to
cover at least that too, 128 KB.
INTERRUPT_ID_I2C is at (ISR_TABLE3_OFFSET + 19) = 96+19 = 115,
convert back to SPI IRQ 115-32 = 83.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20260218-bcmbca-i2c-dts-v2-7-5373ef82c50c@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The BCM63138 has a brcmper I2C block.
The interrupt is at INTERRUPT_ID_I2C whic is
(ISR_TABLE3_OFFSET + 19) = 96+115, convert back
to SPI interrupt 115-32 = 83.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20260218-bcmbca-i2c-dts-v2-6-5373ef82c50c@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The BCM6855 has two brcmper I2C blocks, the second one in
the PERF1 area at 0xff85a800, this is covered by the
current bus range.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20260218-bcmbca-i2c-dts-v2-4-5373ef82c50c@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The WAN MAC is offset by 1. Set in dts to avoid having to handle this in
userspace.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/r/20260225230827.21715-5-rosenp@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The MAC address from the stock firmware is offset by 1. Define it
properly to avoid having to override it in userspace.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/r/20260225230827.21715-3-rosenp@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The MAC address from the stock firmware is offset by 1. Define it
properly to avoid having to override it in userspace.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/r/20260225230827.21715-2-rosenp@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The 'gpu' and 'firmware' nodes are not MMIO devices, so they should not
be under a 'simple-bus', but at the root level.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260320154809.1246064-2-robh@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
- Add CPU frequency scaling and QSPI NOR FLASH support on the RZ/N1
SoC and the RZN1D-DB development board,
- Add PCIe slot power control on the R-Car H3, M3-W(+), M3-N, and E3
SoCs,
- Add USB3.0 PHY support on the R-Car E3 SoC and the Ebisu development
board,
- Add PCIe/USB3.0 clock generator support on the Salvator-X(S), ULCB
King Fisher extension, and Ebisu development boards,
- Add RTC support on the RZ/V2N SoC and its EVK board,
- Add SPI DMA support on the RZ/T2H, RZ/N2H, RZ/V2H(P), and RZ/V2N
SoCs,
- Add support for the second SDHI channel on the Atmark Techno
Armadillo-800-EVA board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCabPoqgAKCRCKwlD9ZEnx
cK3VAP9KtqAaL0emRTRxXYXoiuovuOmJItILVV+x5SCGMcEsVQEAjdLhn6qOpQ7E
RZAUp488yi3FFjihA66ueFTag7uXFw4=
=VlnU
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v7.1-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v7.1
- Add CPU frequency scaling and QSPI NOR FLASH support on the RZ/N1
SoC and the RZN1D-DB development board,
- Add PCIe slot power control on the R-Car H3, M3-W(+), M3-N, and E3
SoCs,
- Add USB3.0 PHY support on the R-Car E3 SoC and the Ebisu development
board,
- Add PCIe/USB3.0 clock generator support on the Salvator-X(S), ULCB
King Fisher extension, and Ebisu development boards,
- Add RTC support on the RZ/V2N SoC and its EVK board,
- Add SPI DMA support on the RZ/T2H, RZ/N2H, RZ/V2H(P), and RZ/V2N
SoCs,
- Add support for the second SDHI channel on the Atmark Techno
Armadillo-800-EVA board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v7.1-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (30 commits)
ARM: dts: renesas: armadillo800eva: Add wakeup-source to st1232
ARM: dts: renesas: armadillo800eva: Enable SDHI1
ARM: dts: renesas: r9a06g032-rzn1d400-db: Use interrupts for Micrel PHYs
ARM: dts: renesas: r9a06g032-rzn1d400-db: Do not use underscores in node names
ARM: dts: renesas: r9a06g032-rzn1d400-db: Add QSPI node including NOR flash
arm64: dts: renesas: r9a09g057: Add DMA support for RSPI channels
arm64: dts: renesas: r9a09g056: Add DMA support for RSPI channels
ARM: dts: renesas: r9a06g032: Describe the QSPI controller
arm64: dts: renesas: r9a09g087: Wire up DMA support for SPI
arm64: dts: renesas: r9a09g077: Wire up DMA support for SPI
arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Enable RTC
arm64: dts: renesas: r9a09g056: Add RTC node
arm64: dts: renesas: ebisu: Describe PCIe/USB3.0 clock generator
arm64: dts: renesas: ulcb: ulcb-kf: Describe PCIe/USB3.0 clock generator
arm64: dts: renesas: salvator-common: Describe PCIe/USB3.0 clock generator
arm64: dts: renesas: r8a77990: Add USB 3.0 PHY and USB3S0 clock nodes
arm64: dts: renesas: r8a77990: Describe PCIe root port
arm64: dts: renesas: r8a77965: Describe PCIe root ports
arm64: dts: renesas: r8a77961: Describe PCIe root ports
arm64: dts: renesas: r8a77960: Describe PCIe root ports
...
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
On the -d revision of the bcm2712 the pinctrl differs from the c0
revision. The driver already supports both and distinguishes the two
with the compatible string.
Update the compatible string and reg length to reflect the different
pinctrl.
Signed-off-by: Gregor Herburger <gregor.herburger@linutronix.de>
Link: https://lore.kernel.org/r/20260226-raspi-dts-updates-v1-5-60832d20ff04@linutronix.de
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The bcm2712 found in the Raspberry Pi 5 has a PiSP Image Signal
Processor back end image processor.
Add the relevant node to the devicetree.
Signed-off-by: Gregor Herburger <gregor.herburger@linutronix.de>
Link: https://lore.kernel.org/r/20260226-raspi-dts-updates-v1-3-60832d20ff04@linutronix.de
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The RaspberryPi 5 has 2 PiSP Camera front end controller on the RP1
chipset.
Add the relevant nodes to the devicetree.
Signed-off-by: Gregor Herburger <gregor.herburger@linutronix.de>
Link: https://lore.kernel.org/r/20260226-raspi-dts-updates-v1-2-60832d20ff04@linutronix.de
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
They are always required and instead of duplicating a definition in each
dts file, place it in dtsi with labels and work based on that.
Also changed each bridge@ to pcie@ to get extra dtc static analysis.
Fixed bridge numbers as a result.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/r/20260302000736.592422-1-rosenp@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Commits 0ad5bc1ce4 ("drm/v3d: fix up register addresses for V3D 7.x")
and 6fd9487147 ("drm/v3d: add brcm,2712-v3d as a compatible V3D device")
added driver support for V3D on BCM2712, but the corresponding device
tree node is still missing.
Add the V3D device tree node to the BCM2712 DTS.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20260114120610.82531-1-mcanal@igalia.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Lichee Pi 4A board features a HDMI Type-A connector connected to the
HDMI TX controller of TH1520 SoC.
Add a device tree node describing the connector, connect it to the HDMI
controller, and enable everything on this display pipeline.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Tested-by: Michal Wilczynski <m.wilczynski@samsung.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
The Digital Video Port (DVP, the 16-bit variant) of the RK3568 VICAP
is broken out to the PF5 mainboard expansion header.
Enable it in the device tree overlay for the WolfVision PF5 IO
Expander board.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Tested-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://patch.msgid.link/20260313-wv-io-expander-vicap-v1-1-11001fb3b744@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the wakeup-source property to the ST1232 touchscreen node in the
device tree so that the touchscreen interrupt can wake the system from
suspend when the panel is touched.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260309000319.74880-3-phucduc.bui@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Armadillo-800EVA board provides an SD card slot and an AWL13 SDIO
interface connected to the SDHI1 controller. Routing between these two
interfaces is controlled by a mechanical DIP switch and a set of
multiplexers.
To support this, add:
- A fixed 3.3V regulator for SDHI1 power, controlled by PORT16 (G2),
- SDHI1 pinmux groups for data, control, and card detection,
- A gpio-hog for PORT6 (J5) to control the SDHI1/AWLAN multiplexer.
PORT176 (N21) is already configured as output-high in this DTS (via
lcd0-mux-hog), routing the SDSLOT2_ENABLE signal to PORT6. Since the
hardware includes an external 10k pull-up resistor (R94) on this line,
PORT6 is configured as an input to allow the physical DIP switch to
determine the routing without SoC interference.
Both configurations have been verified:
- SD card (CON8): detected as mmcblk1, high-speed SDHC,
- SDIO (CON14): detected as mmc1, high-speed SDIO.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260224074532.60046-1-phucduc.bui@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Move the SRAM node into the SoC node. Move the memory node out of
the include to make it customizable for each platform variant.
Signed-off-by: Debbie Horsfall <debbie.horsfall@arm.com>
Message-Id: <20260311173948.3478931-1-debbie.horsfall@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
The gpio-ranges in the MT7986A pinctrl node were incorrectly defined,
therefore, pin 100 cannot be used.
Correct the range count to match the driver.
Fixes: c3a064a32e ("arm64: dts: mediatek: add pinctrl support for mt7986a")
Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
