This adds "--do-norm", --do-no-norm", and "--no-norm" synonyms for the
"--do-normal" group of torture.sh command-line arguments.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
The constraints on the arguments to kvm-series.sh are easy to forget,
so this commit adds examples in the header comment.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
This new torture_sched_set_normal() function clamps the nice value at
the MIN_NICE..MAX_NICE limits, splatting it these limits are exceeded.
It then invokes sched_set_normal() to set the new value. This prevents
more difficult-to-debug failures within the scheduler.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Currently, rcutorture bypasses lazy RCU by using call_rcu_hurry().
This works, avoiding the dreaded rtort_pipe_count WARN(), but fails to
fully test lazy RCU. The rtort_pipe_count WARN() splats because lazy RCU
could delay the start of an RCU grace period for a full stutter period,
which defaults to only three seconds.
This commit therefore reverts the call_rcu_hurry() instances
back to call_rcu(), but, in kernels built with CONFIG_RCU_LAZY=y,
queues a workqueue handler just before the call to stutter_wait() in
rcu_torture_writer(). This workqueue handler invokes rcu_barrier(),
which motivates any lingering lazy callbacks, thus avoiding the splat.
Reported-by: Saravana Kannan <saravanak@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Extend the binding to cover details specific to the Tenstorrent RISC-V
IOMMU. In particular, a second register range is added which contains
M-privileged registers, e.g., PMAs and PMPs.
The RISC-V spec S-privileged registers remain in the first register
range and are compatible with "riscv,iommu" so the Linux driver does not
notice any difference, but the binding will be used by OpenSBI and
potentially other M-mode software.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[fustini: fix dt_binding_check errors]
Signed-off-by: Drew Fustini <fustini@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJPBAABCgA5FiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmoRu2cbFIAAAAAABAAO
bWFudTIsMi41KzEuMTIsMiwyAAoJEMVl1fnXbVg7jk0P/iokJwhO+YP7rdnDPAl6
wXYq/e4HxSl65//wwkR2Q7zc/GWOSdGZoP7fHCtXY52RERDKq2xrkQ+fBtnEMvS3
N6bwM0kVBoGPkXRHrf55SdfH7ITldeVAYIRIajO5bVT/j/F8l9s7ivXmI0Ep1xgZ
Eiv5MuOiW/kPLzYW1pHP+UniaUhIgQGTRcHs7NotAn55q2odnLdddRWx8NGT1kAe
Owydf6c0/B/+7NLhTLQl/w4WmeFL3OR0b0HuHiVYBNuQBkgCxwcUsERfPjnWpAbr
Pll32JKmJxH1Rthr8qA++Xv72D31VNAYVwxyieq/kPSFg6rwjcKw2lLdFKv99fCT
3OcDg0N9X20RK4ZcyMSwiCkS92DFStmVy4FtVIdNXbgpRcbw/jHNB6CnFq+RHOVU
wBNYdLte7zSmroDSQ/U2l/xY0n1KCf/KcYBxnkIkri6fdl/f2o8/monPfbsUvYiK
0qI3ODSomBpQRU0vYddJ28KfEx0iHqSQzmDyRFDlDuNb7M24d5W82jWLf60Nlk4h
ngehWVaVvLm8y4YiRteD10TGD7ClBE6ilu0t0dS2ys7o7stIAuXbjIP435tYz2T4
B0ddujn7S0mwNCoT+5yRfmxPQFJpyt93jU65VTJ95Mc7Pg43/D6b5ju7tvZlVdNw
NT4nY8sOiLy1KR72SvguXPSr
=hKb2
-----END PGP SIGNATURE-----
Merge tag 'for-7.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A batch of fixes to simple quotas:
- add conditional rescheduling point not dependent on the lock during
inode iterations to avoid delays with PREEMPT_NONE enabled
- fix subvolume deletion so it does not break the squota invariants
- properly handle enabling squota, tracking extents in the initial
transaction
- catch and warn about underflows, clamp to zero to avoid further
problems
And one fix to inode size handling:
- fix handling of preallocated extents beyond i_size when not using
the no-holes feature"
* tag 'for-7.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: swallow btrfs_record_squota_delta() ENOENT
btrfs: clamp to avoid squota underflow
btrfs: fix squota accounting during enable generation
btrfs: check for subvolume before deleting squota qgroup
btrfs: always drop root->inodes lock before cond_resched()
btrfs: mark file extent range dirty after converting prealloc extents
Add a riscv,pmu device tree node with SBI PMU event mappings for the
SiFive X280 hardware performance counters. This enables OpenSBI to
expose the SBI PMU extension, allowing Linux perf to use the 4
programmable counters (mhpmcounter3-6) across 3 event classes:
instruction commit, microarchitectural, and memory system events.
Event encodings are derived from the SiFive Tenstorrent X280 MC Manual
(21G3.04.00) Table 13, section 3.10.5.
Assisted-by: Claude:claude-opus-4-6[1m]
Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCahG3QAAKCRBcsMJ8RxYu
Y92cAYC0vDsgBcwRgeLBhrEHmzvkNBwKJAqAvXzYoxP/ux+N7hvS3k7kieXXTmmw
v/fX7AMBf2C9hjNn6la4uRxR0kkQWneqQWAvkxiy/584xnCheCFR3D+olAgh0ySp
BWRCCbEzwg==
=lIaC
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-7.1-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Carlos Maiolino:
"A single fix for a race in xfs buffer cache which may lead to
filesystem shutdown due to inconsistent metadata if the buffer
lookup happens to find an old dead buffer still in the cache"
* tag 'xfs-fixes-7.1-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix a buffer lookup against removal race
The assignment of strrchr() return values to non-const char * variables
triggers a -Werror=discarded-qualifiers warning when building with GCC
14.
This happens because in newer glibc versions, strrchr() returns a 'const
char *' if the input string is const.
Properly declare 'line2' and 'nl' as const char * to match the glibc
function signature and ensure type safety. This avoids the need for
explicit type casting and aligns with the design pattern of not
modifying read-only memory in the perf tool.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Li Guan <guanli.oerv@isrc.iscas.ac.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a variable truncation when calculating period in microseconds as
part of the solution for the ERR051198 in .apply() callback.
Example scenario:
- Period of 3us (PWMPR = 196 and prescaler = 1)
- Expected value in tmp: 198000000000 (NSEC_PER_SEC * (196 + 2) * 1)
- Actual value is 431504384 (truncation to u32)
Signed-off-by: Ronaldo Nunez <rnunez@baylibre.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260522191348.6227-1-rnunez@baylibre.com
Fixes: a25351e4c7 ("pwm: imx27: Workaround of the pwm output bug when decrease the duty cycle")
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
PWMCON register Bit(3) is used to configure whether to pre divide
the clock source. Most revisions clear this bit to disable frequency
division. However, mt7628 needs to set this bit. Hence, we introduce
a new clksel_fixup flag to correctly configure the clock source for
mt7628.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://patch.msgid.link/OS7PR01MB136020DA816E8D601D5BA8BF4BC74A@OS7PR01MB13602.jpnprd01.prod.outlook.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
- Implement _THIS_IP_ for inline asm
- Add Simon Schuster as a maintainer and mark the NIOS2 as Supported
-----BEGIN PGP SIGNATURE-----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=LDk6
-----END PGP SIGNATURE-----
Merge tag 'nios2_updates_for_v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux
Pull nios2 fixes from Dinh Nguyen:
- Implement _THIS_IP_ for inline asm
- Add Simon Schuster as a maintainer and mark the NIOS2 as Supported
* tag 'nios2_updates_for_v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
nios2: Implement _THIS_IP_ using inline asm
MAINTAINERS: arch/nios2: Add Simon Schuster as co-maintainer
The offset for the cleanup-label jump is computed before the MOV R7
instruction is emitted, but the JMP lands after it. Account for the
extra insn in the offset calculation (-2 instead of -1). Drop the
redundant self-loop in the else branch; gen->error = -ERANGE already
marks the generation as failed.
Fixes: fb2b0e2901 ("libbpf: Update light skeleton for signing")
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20260522215337.662271-2-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Remove the software node on platform device release(); without this,
the software node remains registered after the device is gone and a
subsequent platform_device_register_full() reusing the same node fails
with -EBUSY
- In sysfs_update_group(), do not remove a pre-existing directory when
create_files() fails; the previous code would silently destroy a sysfs
group that the caller did not create
- Set fwnode->secondary to NULL in fwnode_init() to avoid dereferencing
uninitialized memory (e.g. in dev_to_swnode()) when the firmware node
is allocated on the stack or via a non-zeroing allocator
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCahGkDAAKCRBFlHeO1qrK
Ls4tAP0Ti0VhRJOHz2h3boyp0tXH1bIt082073oJGasHAjnoeQEAg0zbdA2Qkj9o
DDv5iX6KYGkeFUzv8MjuWUexc5HlYQ0=
=Lc0O
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Remove the software node on platform device release(); without this,
the software node remains registered after the device is gone and a
subsequent platform_device_register_full() reusing the same node
fails with -EBUSY
- In sysfs_update_group(), do not remove a pre-existing directory when
create_files() fails; the previous code would silently destroy a
sysfs group that the caller did not create
- Set fwnode->secondary to NULL in fwnode_init() to avoid dereferencing
uninitialized memory (e.g. in dev_to_swnode()) when the firmware node
is allocated on the stack or via a non-zeroing allocator
* tag 'driver-core-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
device property: set fwnode->secondary to NULL in fwnode_init()
sysfs: don't remove existing directory on update failure
driver core: platform: remove software node on release()
- syzbot triggred crash in rxe due to concurrent plug/unplug
- Possible non-zero'd memory exposed to userspace in bnxt_re
- Malicous 'magic packet' with SIW causes a buffer overflow
- Tighten the new uAPI validation code to not crash in debugging prints
and have the right module dependencies in drivers
- mana was missing the max_msg_sz report to userspace
- UAF in rtrs on an error path
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCahDmpgAKCRCFwuHvBreF
YRRTAP0YXV95Y5gcli55IhetKjJUzQbaREz2NueqIpf1IorMbAD+Lns4DgZCU0KW
bC81x7cGHBSyCju9zogIdBFJhsbxeQ4=
=MxJz
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- syzbot triggred crash in rxe due to concurrent plug/unplug
- Possible non-zero'd memory exposed to userspace in bnxt_re
- Malicous 'magic packet' with SIW causes a buffer overflow
- Tighten the new uAPI validation code to not crash in debugging prints
and have the right module dependencies in drivers
- mana was missing the max_msg_sz report to userspace
- UAF in rtrs on an error path
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rtrs: Fix use-after-free in path file creation cleanup
RDMA/mana_ib: Report max_msg_sz in mana_ib_query_port
RDMA/core: Do not read wild stack memory in uverbs_get_handler_fn()
RDMA/core: Move the _ib_copy_validate_udata* functions to ib_core_uverbs
RDMA/siw: Reject MPA FPDU length underflow before signed receive math
RDMA/bnxt_re: zero shared page before exposing to userspace
selftests/rdma: explicitly skip tests when required modules are missing
RDMA/nldev: Add mutual exclusion in nldev_dellink()
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Lines starting with '#' will be ignored.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCahG0TgAKCRBcsMJ8RxYu
Y18FAX0cD9LJOQetOPnFHYl6AdO4f0OmaBnjbyF19iRQjrLo9GthdiQf7WXD6QaG
b00H18ABgMYDhTO70T1zH2KkpaaVBOKHT9oFQ+Bzki6R1J+rCU2ZXOiQARmFLvd3
xE25p55FiQ==
=UWBN
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-7.1-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux into test_merge
xfs: fixes for v7.1-rc5
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Lines starting with '#' will be ignored.
- Buffer overflow due to missing input validation in pds
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCahDk/QAKCRCFwuHvBreF
YRxuAQCliGLeyivZ1BVcJ0rB7obSheMWS6drbJbw2H5LmRkAcwD/XHJeTHsu2Cqs
Pf8mZR5b+MZGm3SpAxYR+FJLxV4rmAc=
=CxSO
-----END PGP SIGNATURE-----
Merge tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl
Pull fwctl fix from Jason Gunthorpe:
- Buffer overflow due to missing input validation in pds
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl:
fwctl: pds: Validate RPC input size before parsing
When running on a GICv5 host, we push an arch-timer-specific interrupt
domain for the timer interrupts. This interrupt domain is used to mask
the host interrupt when a GICv5 guest is running. However, this
interrupt domain is still in place when running with a GICv3 guest on
GICv5 hardware. The result is that some interrupt state changes are
not correctly propragated to the host irqchip driver for legacy
guests.
Explicitly pass irqchip state changes though to the host irqchip
driver when running a GICv3-based guest on a GICv5 host. This bypasses
all masking, and thereby operates just as a native GICv3 guest would,
with the exception of having an additional irq domain in the
hierarchy.
Fixes: 9491c63b6c ("KVM: arm64: gic-v5: Enlighten arch timer for GICv5")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20260520091949.542365-19-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
With GICv5 an interrupt of equal or lower priority cannot be signalled
until there has been a priority drop. This is done via the GIC CDEOI
system instruction. Once this has been executed, the hardware is able
to signal the next interrupt if there is one.
As all interrupts are programmed to have the same priority, no new
interrupts can be signalled until the priority drop has happened. This
can cause issues when, for example, an interrupt remains active while
a long running process takes place, such as when injecting a physical
interrupt into a guest VM in software.
The GICv5 driver has so far done the priority drop as part of
irq_eoi(), i.e., at the same time as deactivating the interrupt. This
means that any long running process (or VM) could block incoming
interrupts, effectively causing a denial of service for all other
interrupts.
Rather than doing the EOI as part of irq_eoi() (which the name would
suggest would be a good place for it), move it to happen immediately
after acknowledging an interrupt in the main GICv5 interrupt
handler. The deactivation of interrupts (GIC CDDI) remains implemented
as part of irq_eoi(), which means that the same interrupt cannot be
signalled a second time until deactivated by software.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20260520091949.542365-18-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
When running a GICv5-based guest, the PMU must use PPI 23. This,
however, must be communicated via the
KVM_ARM_VCPU_PMU_V3_CTRL->KVM_ARM_VCPU_PMU_V3_IRQ ioctl as a full
GICv5-style Interrupt ID. That is, 0x20000017. Optionally, the whole
ioctl can be skipped for GICv5.
This was previously not clearly documented, so bump the documentation
accordingly.
Fixes: 7c31c06e2d ("KVM: arm64: gic-v5: Mandate architected PPI for PMU emulation on GICv5")
Link: https://sashiko.dev/#/patchset/20260319154937.3619520-1-sascha.bischoff%40arm.com
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20260520091949.542365-17-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
For GICv5 guests we make use of the DVI mechanism for PPIs where
possible. When mapping a virtual irq to a physical one for a GICv5
guest, the corresponding bit in the DVI bitmap is set. When unmapping,
said bit is cleared again. The key user of this mechanism is the arch
timer.
The existing code used the non-atomic __assign_bit() rather than doing
the update atomically. This could technically result in losing state
if a second PPI's DVI bit were being manipulated concurrently. Each
individual bit within the DVI bitmap is guarded using
vgic_irq->irq_lock, but there's no locking for the overall
bitmap. Therefore, switch to using the atomic assign_bit() function
instead.
Fixes: 5a98d0e17e ("KVM: arm64: gic-v5: Implement direct injection of PPIs")
Link: https://sashiko.dev/#/patchset/20260319154937.3619520-1-sascha.bischoff%40arm.com
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20260520091949.542365-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
As things stand, there is no support for Nested Virt with GICv5 guests
yet. However, this is coming and therefore we need to be able to
correctly triage the traps when running with NV.
Add the missing fgtreg lookups required for that to
triage_sysreg_trap(). These are specific to the FGT regs added as part
of GICv5:
* ICH_HFGRTR_EL2
* ICH_HFGWTR_EL2
* ICH_HFGITR_EL2
Fixes: 9d6d9514c0 ("KVM: arm64: gic-v5: Support GICv5 FGTs & FGUs")
Link: https://sashiko.dev/#/patchset/20260319154937.3619520-1-sascha.bischoff%40arm.com
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20260520091949.542365-11-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fix multiple documentation build warnings.
Improve punctuation and formatting of the rendered output.
Documentation/arch/arm/zte/zx297520v3.rst:66: WARNING: Title underline too short.
3. Building for built-in U-Boot
--------------------------- [docutils]
Documentation/arch/arm/zte/zx297520v3.rst:90: WARNING: Enumerated list ends without a blank line; unexpected unindent. [docutils]
Documentation/arch/arm/zte/zx297520v3.rst:116: WARNING: Inline literal start-string without end-string. [docutils]
Documentation/arch/arm/zte/zx297520v3.rst:137: ERROR: Unexpected indentation. [docutils]
Documentation/arch/arm/zte/zx297520v3.rst:138: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
Documentation/arch/arm/zte/zx297520v3.rst:164: WARNING: Inline literal start-string without end-string. [docutils]
Documentation/arch/arm/zte/zx297520v3.rst:164: WARNING: Inline interpreted text or phrase reference start-string without end-string. [docutils]
Documentation/arch/arm/zte/zx297520v3.rst:7: WARNING: Document or section may not begin with a transition. [docutils]
Fixes: 220ae5d36d ("ARM: zte: Add zx297520v3 platform support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Stefan Dösinger <stefandoesinger@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Stefan Dösinger <stefandoesinger@gmail.com>
pci_suspend_retains_context() lets PCI client drivers know if the platform
can retain the device context during suspend. This is decided based on
several factors like:
- Firmware involvement at the end of suspend
- Any platform limitation in waking from low power state (e.g., L1SS)
This API may be extended in the future to cover other platform specific
issues impacting the device low power mode during system suspend.
Use this API instead of checks like pm_suspend_via_firmware(). When
pci_suspend_retains_context() returns false, assume the platform cannot
retain the context and shutdown the controller. If it returns true, assume
that the context will be retained and keep the device in low power mode.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260519-l1ss-fix-v2-4-b2c3a4bdeb15@oss.qualcomm.com
Qcom PCIe RCs can successfully exit from L1SS during OS runtime. However,
during system suspend, the Qcom PCIe RC driver may remove all resource
votes and turn off the PHY to maximize power savings.
Consequently, when the host is in system suspend with the link in L1SS and
the endpoint asserts CLKREQ#, the RC driver must restore the PHY and enable
the REFCLK. This recovery process causes the L1SS exit latency time to be
exceeded (roughly L10_REFCLK_ON + T_COMMONMODE). If the RC driver were to
retain all votes during suspend, L1SS exit would succeed without issue but
at the expense of higher power consumption.
When the host fails to move the link from L1SS to L0 within the
L10_REFCLK_ON + T_COMMONMODE time, the endpoint may treat it as a fatal
condition and trigger Link Down (LDn) during resume. This LDn results in a
reset that destroys the internal device state.
To ensure that the client drivers can properly handle this scenario, let
them know about this platform limitation by setting the
'pci_host_bridge::broken_l1ss_resume' flag.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260519-l1ss-fix-v2-3-b2c3a4bdeb15@oss.qualcomm.com
Per PCIe v7.0, sec 5.5.3.3.1, when exiting L1.2 due to an endpoint
asserting CLKREQ# signal, the REFCLK must be turned on within the latency
advertised in the LTR message. This requirement applies to L1.1 as well.
On some platforms like Qcom, these requirements are satisfied during OS
runtime, but not while resuming from the system suspend. This happens
because the PCIe RC driver may remove all resource votes and turn off the
PHY analog circuitry during suspend to maximize power savings while keeping
the link in L1SS.
Consequently, when the endpoint asserts CLKREQ# to wake up, the RC driver
must restore the PHY and enable the REFCLK. When this recovery process
exceeds the L1SS exit latency time (roughly L10_REFCLK_ON + T_COMMONMODE),
the endpoint may treat it as a fatal condition and trigger Link Down (LDn).
This results in a reset that destroys the internal device state.
So to indicate this platform limitation to the client drivers, introduce a
new flag 'pci_host_bridge::broken_l1ss_resume' and check it in
pci_suspend_retains_context(). If the flag is set by the RC driver, the API
will return 'false' indicating the client drivers that the device context
may not be retained and the drivers must be prepared for context loss.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260519-l1ss-fix-v2-2-b2c3a4bdeb15@oss.qualcomm.com
When request_irq() fails, the region allocated by request_region()
is not released. Fix this by calling release_region() before returning.
Smatch warning:
drivers/gpib/cb7210/cb7210.c:1068 cb_isa_attach() warn: 'config->ibbase'
from __request_region() not released on lines: 1064.
Fixes: 82e3508046 ("staging: gpib: cb7210 console messaging cleanup")
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://patch.msgid.link/20260503093036.283546-1-zenghongling@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1857f8296 ("gpib: fix use-after-free in IO ioctl handlers")
introduced a descriptor_busy reference counter to pin struct
gpib_descriptor across IO ioctl operations. In command_ioctl(), the
error path inside the loop decrements descriptor_busy and breaks, but
execution then falls through to the unconditional decrement after the
loop, underflowing the counter to -1.
This re-enables the use-after-free that the original fix was meant to
prevent: a concurrent close_dev_ioctl() sees descriptor_busy == 0 on
an actively-used descriptor and frees it.
Remove the early decrement from the error path. The post-loop
decrement already handles all exit paths, matching the correct pattern
used in read_ioctl() and write_ioctl().
Fixes: d1857f8296 ("gpib: fix use-after-free in IO ioctl handlers")
Reported-by: Ruikai Peng <ruikai@pwno.io>
Signed-off-by: Adam Crosser <adam.crosser@praetorian.com>
Link: https://patch.msgid.link/20260424123750.855863-1-adam.r.crosser@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The agilent_82357a driver uses the USB device serial string for device
matching but does not verify that the string exists before passing it
to strcmp().
Verify that the device has a serial number before accessing it to avoid
triggering a NULL-pointer dereference with devices that don't provide
a serial number (iSerialNumber = 0).
Similar to commit aa79f996eb ("i2c: cp2615: fix serial string
NULL-deref at probe").
Found by Claude:sonnet-4.5
Signed-off-by: Joe Simmons-Talbott <joest@redhat.com>
Acked-by: Dave Penkler <dpenkler@gmail.com>
Link: https://patch.msgid.link/20260326131256.1758014-1-joest@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The applicom driver supports PCI Profibus cards from Applicom, later
acquired by Molex. It has severe coding style issues and has attracted
a number of bug and security fixes over the years, despite the fact
that no one appears to be using it. It was broken from at least the
beginning of Git history (Linux 2.6.12-rc2 in April 2005) until October
2008, when a fatal bug was fixed in commit bc20589bf1 ("applicom.c:
fix apparently-broken code in do_ac_read()"). In the commit message,
the author commented that no one they knew was able to test the change.
Since then, there have been no commits that indicate the driver is
being used. Later PCI and PCI-Express Applicom Profibus cards only
officially support Windows [1], and even the PCI-Express cards have
been discontinued [2]. Given all these factors, remove the driver to
reduce future maintenance workload.
[1] https://www.sarcitalia.it/file_upload/prodotti//PCIE1500S7_PFB_987651-3769_0876250001505823933.pdf
[2] https://us.rs-online.com/product/molex-woodhead-brad/112011-5026/70631928/
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260503035824.24078-1-enelsonmoore@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dtlk driver supports the RC Systems DoubleTalk PC ISA speech
synthesizer card. It has severe coding style issues and has only
received tree-wide fixes and drive-by cleanups in the entire Git
history (since Linux 2.6.12-rc2). The same hardware is supported by
drivers/accessibility/speakup for screen reader use, but that
implementation does not share any code with this driver. Given all of
these factors, it is likely the driver is entirely unused. Remove it to
reduce future maintenance workload.
Note: The removed maintainer is already listed in CREDITS.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260502043341.34324-1-enelsonmoore@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
acrn_irqfd_deassign() and the eventfd EPOLLHUP wakeup can race and free
the same struct hsm_irqfd:
CPU0 CPU1
---- ----
eventfd_release()
wake_up_poll(EPOLLHUP)
hsm_irqfd_wakeup()
queue_work(&irqfd->shutdown)
acrn_irqfd_deassign()
hsm_irqfd_shutdown()
list_del_init()
eventfd_ctx_remove_wait_queue()
eventfd_ctx_put()
kfree(irqfd)
hsm_irqfd_shutdown_work()
container_of(work, ..., shutdown)
irqfd->vm <-- use-after-free
The deassign path freed the irqfd while a shutdown work item was
already queued by EPOLLHUP (or vice versa), so the work item could
resurrect a dangling pointer through container_of().
Switch to the lifetime model used by KVM irqfds:
- Deassign/deinit only deactivate the irqfd: remove it from vm->irqfds
under irqfds_lock and queue the cleanup work.
- hsm_irqfd_shutdown_work() becomes the sole owner that unhooks the
eventfd waitqueue entry, drops the eventfd reference and frees the
irqfd.
- A new HSM_IRQFD_FLAG_SHUTDOWN bit guarded by test_and_set_bit()
ensures the cleanup work is queued at most once, no matter how many
of {EPOLLHUP, deassign, deinit} fire concurrently. This is safe to
call from the waitqueue callback, which runs with wqh->lock held and
IRQs disabled and therefore cannot take irqfds_lock.
- acrn_irqfd_deassign() flushes vm->irqfd_wq before returning so the
eventfd is fully detached on return. acrn_irqfd_deinit() deactivates
every irqfd, flushes the workqueue and only then destroys it, so no
path can queue_work() onto a torn-down workqueue.
- acrn_irqfd_assign() now installs the eventfd waitqueue entry and
publishes the irqfd to vm->irqfds under irqfds_lock, so the irqfd is
never visible to deassign/deinit before its waitqueue entry is in
place, and any EPOLLHUP that fires in the assign window queues
cleanup work that blocks on irqfds_lock until publication is done.
Signed-off-by: Sicong Huang <congei42@163.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Link: https://patch.msgid.link/20260519112018.2135000-2-congei42@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The global nvram_mutex in drivers/char/nvram.c is redundant and unused,
and this triggers compiler warnings on some configurations.
All platform-specific nvram operations already provide their own internal
synchronization, meaning the wrapper-level mutex does not provide any
additional safety.
Remove the nvram_mutex definition along with all remaining lock/unlock
users across PPC32, x86, and m68k code paths, and rely entirely on the
per-architecture nvram implementations for locking.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tellakula Yeswanth Krishna <yeswanth@linux.ibm.com>
Signed-off-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Tested-by: yeswanth <yeswanth@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/20260428061540.73668-1-venkat88@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
sonypi driver.
Fixes: 7e488b0af0 ("sonypi: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5087721.GXAFRqVoOG@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
hpet driver.
Fixes: 71f0a26734 ("hpet: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4750803.LvFx2qVVIh@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCI_VDEVICE macro allows to assign the first four members of
pci_device_id more idiomatic and compact.
Also drop trailing zeros in the list initializer that the compiler takes
care of then. The driver doesn't use neither .class, .class_mask nor
.driver_data, so it's fine to not assign these explicitly.
There are no changes to the compiled data; confirmed using an x86 and an
arm64 build.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260507080402.2672527-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initializing structures using list initializers is harder to read than
using named initializers. Seeing the member name is more ideomatic and
easier to understand.
Use named initializers for the driver's pci_device_id array.
While at it also drop an explicit zero in the terminating array entry.
There are no changes to the compiled result of the array; verified with
builds for x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260504155715.2163032-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch improves the module cleanup process in the tlclk driver to
prevent potential use-after-free and race conditions.
Currently, the file_operations structure does not specify the .owner
field, which could allow the module to be unloaded while user-space
processes are still interacting with the device. Additionally, the
tlclk_cleanup() function frees the alarm_events memory before ensuring
that blocked processes in the waitqueue are fully awakened and that the
switchover_timer has completed.
To address these cases, this patch:
- Sets '.owner = THIS_MODULE' in tlclk_fops to safely defer module
unloading while the device is in use.
- Updates tlclk_cleanup() to explicitly wake up all blocked readers
(wake_up_all), properly release hardware I/O regions, and safely
delete the timer (timer_delete_sync) prior to freeing memory.
Fixes: 1a80ba8827 ("[PATCH] Telecom Clock Driver for MPCBL0010 ATCA computer blade")
Signed-off-by: James Kim <james010kim@gmail.com>
Link: https://patch.msgid.link/20260503101131.64219-1-james010kim@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adhere to termnator line rule and remove comma from
sentinel in enum mei_cfg_idx.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260409125524.111530-4-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
