Clean up the rtw_hal_init function.
Remove the status variable. Exit immediately for errors.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221106124901.720785-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no need to check for bSurpriseRemoved or bDriverStopped in the
rtw_led_control function. This function schedules a delayed worker which
calls SwLedOn or SwLedOff (or the function calls SwLedOff directly).
SwLedOn and SwLedOff check bDriverStopped themselves or they initiate a
USB control transfer via usb_write, where bSurpriseRemoved is checked.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221106124901.720785-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The definition of Hal_EfuseParseIDCode88E can be a single line.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221106124901.720785-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reorder some of the assignments in update_recvframe_attrib_88e.
This should make it a bit easier to understand the format of the header
that is added by the chip's firmware.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221106124901.720785-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove obsolete comments in validate_recv_data_frame.
There is no prxcmd variable (any more?).
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221106124901.720785-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no need to store an incoming addba request in struct
mlme_ext_info. We only need the addba request to copy some of its fields
into our addba response.
It's simpler to pass the incoming request's management frame to
issue_action_BA as an additional parameter. issue_action_BA can then
extract the required fields. If issue_action_BA prepares a request rather
than a response, the caller sets the parameter for the incoming request to
NULL.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221106124901.720785-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions
is_client_associated_to_ap()
is_client_associated_to_ibss()
is_IBSS_empty()
return boolean values. Convert their return type to bool and replace
_FAIL, which is defined as 0, with false. Another step to get rid of
_SUCCESS / _FAIL.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221105093916.8255-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some structures are only declared but have not been used anywhere
in the code. Remove such unused structs. Issue identified as part
of coccicheck report driven code investigation.
Suggested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/Y2LYvhr74ng+xFbz@qemulion
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify code by using min helper macros in place of lengthy if/else
block oriented logical evaluation and value assignment. This issue is
identified by coccicheck using the minmax.cocci file.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Link: https://lore.kernel.org/r/Y2eKxoUWtbPY/88b@qemulion
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For structure iqk_matrix_regs_setting, only the "Value" member variable
is utilized whereas the other struct members are only declared but not
utilised. Replace the struct declaration and implementation by an
equivalent variable similar to the only used struct member variable.
While in there, update the macro mixed case names to uppercase style.
The resultant code is simpler and is easy to maintain.
Suggested-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Link: https://lore.kernel.org/r/Y2ZF6O1KU3zZ6r3C@qemulion
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the configuration parameter CONFIG_HZ is less that 100, the compiler
generates an error as follows:
../drivers/staging/rtl8192e/rtllib_wx.c: In function 'rtl819x_translate_scan':
../drivers/staging/rtl8192e/rtllib_wx.c:220:57: warning: division by zero [-Wdiv-by-zero]
220 | (jiffies - network->last_scanned) / (HZ / 100));
| ^
In file included from ../include/linux/skbuff.h:45,
from ../include/linux/if_ether.h:19,
from ../include/linux/etherdevice.h:20,
from ../drivers/staging/rtl8192e/rtllib_wx.c:18:
../drivers/staging/rtl8192e/rtllib_wx.c: In function 'rtllib_wx_get_scan':
../drivers/staging/rtl8192e/rtllib_wx.c:261:70: warning: division by zero [-Wdiv-by-zero]
261 | (jiffies - network->last_scanned) /
|
In fact, is HZ is not a multiple of 100, the calculation will be wrong,
but it will compile correctly.
The fix is to get rid of the (HZ / 100) portion. To decrease any round-off
errors, the compiler is forced to perform the 100 * jiffies-difference
before dividing by HZ. This patch is only compile tested.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20221104012750.2076-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change return type of rtw_set_802_11_disassociate to void. This function
always returns 'true' no matter what, so there is no need to return a
value, and no need to check for it in the two call sites within
rtw_wx_set_mlme. Also, as we are no longer using ret in rtw_wx_set_mlme
except as the return value, just remove it and return 0 directly.
Suggested-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221103230632.6946-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make two dead-only arrays const. Make array EWC11NHTCap static const
so it is not populated on the stack, makes the code smaller too.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20221103130619.78413-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instance IQKMatrixRegSetting of struct ijk_matrix_regs_set is
initialised and its member variables are assigned values, but it is
not used anywhere. Remove the structure and its unused implementation.
Suggested-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Link: https://lore.kernel.org/r/Y2P6Jj+IcPss0wFd@qemulion
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify code by using min and max helper macros in place of lengthy
if/else block oriented logical evaluation and value assignment. This
issue is identified by coccicheck using the minmax.cocci file.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Link: https://lore.kernel.org/r/Y2OK6fcIkH3S2/1f@qemulion
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify code by using min_t and max_t helper macros in place of lengthy
if/else block oriented logical evaluation and value assignment. This
issue is identified by coccicheck using the minmax.cocci file.
Use the *_t variants of min/max macros to avoid compiler warnings about
data typecast.
Also, use u32 as type for min_t macro to avoid any truncation of data
associated with enum constant HT_AGG_SIZE_32K.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/Y2LxC2kziM1TznhO@qemulion
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the new field smem_start in struct drm_fb_helper and avoid
a compile-time warning. An error message is shown below and the bug
report is at [1].
include/drm/drm_fb_helper.h:204: warning: Function parameter or member 'hint_leak_smem_start' not described in 'drm_fb_helper'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: e7c5c29a9e ("drm/fb-helper: Set flag in struct drm_fb_helper for leaking physical addresses")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/dri-devel/20221107143858.0253a8ff@canb.auug.org.au/T/#u # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20221107125329.12842-4-tzimmermann@suse.de
Include <linux/io.h> to get readl() and writel() on S390. The error
message is shown below and a bug report is at [1].
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_vdac.c:75:15: error: implicit declaration of function 'readl' [-Werror=implicit-function-declaration]
75 | reg = readl(priv->mmio + HIBMC_DISPLAY_CONTROL_HISILE);
| ^~~~~
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_vdac.c:80:9: error: implicit declaration of function 'writel' [-Werror=implicit-function-declaration]
80 | writel(reg, priv->mmio + HIBMC_DISPLAY_CONTROL_HISILE);
| ^~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 45b64fd9f7 ("drm/fb-helper: Remove unnecessary include statements")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/dri-devel/202211060608.qrTg8b2E-lkp@intel.com/T/#u # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20221107125329.12842-3-tzimmermann@suse.de
Include <linux/vmalloc.h> in fbdev emulation to get vzalloc() and
vfree() on MIPS. The error messages are shown below and bug reports
are at [1] and [2].
drivers/gpu/drm/drm_fbdev_generic.c: In function 'drm_fbdev_cleanup':
drivers/gpu/drm/drm_fbdev_generic.c:63:17: error: implicit declaration of function 'vfree'; did you mean 'kvfree'? [-Werror=implicit-function-declaration]
63 | vfree(shadow);
| ^~~~~
| kvfree
drivers/gpu/drm/drm_fbdev_generic.c: In function 'drm_fbdev_fb_probe':
drivers/gpu/drm/drm_fbdev_generic.c:219:38: error: implicit declaration of function 'vzalloc'; did you mean 'kvzalloc'? [-Werror=implicit-function-declaration]
219 | fbi->screen_buffer = vzalloc(fbi->screen_size);
| ^~~~~~~
| kvzalloc
drivers/gpu/drm/drm_fbdev_generic.c:219:36: warning: assignment to 'char *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
219 | fbi->screen_buffer = vzalloc(fbi->screen_size);
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 8ab59da26b ("drm/fb-helper: Move generic fbdev emulation into separate source file")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/dri-devel/202211060911.5U76gMtE-lkp@intel.com/T/#u # [1]
Link: https://lore.kernel.org/dri-devel/202211060331.1SoD1tAR-lkp@intel.com/T/#u # [2]
Link: https://patchwork.freedesktop.org/patch/msgid/20221107125329.12842-2-tzimmermann@suse.de
This was lost in the code movement done in commit 8ab59da26b
("drm/fb-helper: Move generic fbdev emulation into separate source
file").
Fixes: 8ab59da26b ("drm/fb-helper: Move generic fbdev emulation into separate source file")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107190928.1212116-1-daniel.vetter@ffwll.ch
The ARM architecture revision v8.4 introduces a data independent timing
control (DIT) which can be set at any exception level, and instructs the
CPU to avoid optimizations that may result in a correlation between the
execution time of certain instructions and the value of the data they
operate on.
The DIT bit is part of PSTATE, and is therefore context switched as
usual, given that it becomes part of the saved program state (SPSR) when
taking an exception. We have also defined a hwcap for DIT, and so user
space can discover already whether or nor DIT is available. This means
that, as far as user space is concerned, DIT is wired up and fully
functional.
In the kernel, however, we never bothered with DIT: we disable at it
boot (i.e., INIT_PSTATE_EL1 has DIT cleared) and ignore the fact that we
might run with DIT enabled if user space happened to set it.
Currently, we have no idea whether or not running privileged code with
DIT disabled on a CPU that implements support for it may result in a
side channel that exposes privileged data to unprivileged user space
processes, so let's be cautious and just enable DIT while running in the
kernel if supported by all CPUs.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Adam Langley <agl@google.com>
Link: https://lore.kernel.org/all/YwgCrqutxmX0W72r@gmail.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20221107172400.1851434-1-ardb@kernel.org
[will: Removed cpu_has_dit() as per Mark's suggestion on the list]
Signed-off-by: Will Deacon <will@kernel.org>
The variable "tty_legacy_tiocsti" should be defined before the kerndoc
for the tiocsti() function. The new variable was breaking the "htmldocs"
build target:
drivers/tty/tty_io.c:2271: warning: cannot understand function prototype: 'bool tty_legacy_tiocsti __read_mostly = IS_ENABLED(CONFIG_LEGACY_TIOCSTI); '
Fixes: 83efeeeb3d ("tty: Allow TIOCSTI to be disabled")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/lkml/20221107143434.66f7be35@canb.auug.org.au
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221107034631.never.637-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two selftests drivers exist under the copyleft-next license.
These drivers were added prior to SPDX practice taking full swing
in the kernel. Now that we have an SPDX tag for copyleft-next-0.3.1
documented, embrace it and remove the boiler plate.
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Kuno Woudt <kuno@frob.nl>
Cc: Richard Fontana <fontana@sharpeleven.org>
Cc: copyleft-next@lists.fedorahosted.org
Cc: Ciaran Farrell <Ciaran.Farrell@suse.com>
Cc: Christopher De Nicolo <Christopher.DeNicolo@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the full text of the copyleft-next-0.3.1 license to the kernel
tree as well as the required tags for reference and tooling.
The license text was copied directly from the copyleft-next project's
git tree [0].
Discussion of using copyleft-next-0.3.1 on Linux started since June,
2016 [1]. In the end Linus' preference was to have drivers use
MODULE_LICENSE("GPL") to make it clear that the GPL applies when it
comes to Linux [2]. Additionally, even though copyleft-next-0.3.1 has
been found to be to be GPLv2 compatible by three attorneys at SUSE and
Redhat [3], to err on the side of caution we simply recommend to
always use the "OR" language for this license [4].
Even though it has been a goal of the project to be GPL-v2 compatible
to be certain in 2016 I asked for a clarification about what makes
copyleft-next GPLv2 compatible and also asked for a summary of
benefits. This prompted some small minor changes to make compatibility
even further clear and as of copyleft 0.3.1 compatibility should
be crystal clear [5].
The summary of why copyleft-next 0.3.1 is compatible with GPLv2
is explained as follows:
Like GPLv2, copyleft-next requires distribution of derivative works
("Derived Works" in copyleft-next 0.3.x) to be under the same license.
Ordinarily this would make the two licenses incompatible. However,
copyleft-next 0.3.1 says: "If the Derived Work includes material
licensed under the GPL, You may instead license the Derived Work under
the GPL." "GPL" is defined to include GPLv2.
In practice this means copyleft-next code in Linux may be licensed
under the GPL2, however there are additional obvious gains for
bringing contributions from Linux outbound where copyleft-next is
preferred. A summary of benefits why projects outside of Linux might
prefer to use copyleft-next >= 0.3.1 over GPLv2:
o It is much shorter and simpler
o It has an explicit patent license grant, unlike GPLv2
o Its notice preservation conditions are clearer
o More free software/open source licenses are compatible
with it (via section 4)
o The source code requirement triggered by binary distribution
is much simpler in a procedural sense
o Recipients potentially have a contract claim against distributors
who are noncompliant with the source code requirement
o There is a built-in inbound=outbound policy for upstream
contributions (cf. Apache License 2.0 section 5)
o There are disincentives to engage in the controversial practice
of copyleft/ proprietary dual-licensing
o In 15 years copyleft expires, which can be advantageous
for legacy code
o There are explicit disincentives to bringing patent infringement
claims accusing the licensed work of infringement (see 10b)
o There is a cure period for licensees who are not compliant
with the license (there is no cure opportunity in GPLv2)
o copyleft-next has a 'built-in or-later' provision
The first driver submission to Linux under this dual strategy was
lib/test_sysctl.c through commit 9308f2f9e7 ("test_sysctl: add
dedicated proc sysctl test driver") merged in July 2017. Shortly after
that I also added test_kmod through commit d9c6a72d6f ("kmod: add
test driver to stress test the module loader") in the same month. These
two drivers went in just a few months before the SPDX license practice
kicked in. In 2018 Kuno Woudt went through the process to get SPDX
identifiers for copyleft-next [6] [7]. Although there are SPDX tags
for copyleft-next-0.3.0, we only document use in Linux starting from
copyleft-next-0.3.1 which makes GPLv2 compatibility crystal clear.
This patch will let us update the two Linux selftest drivers in
subsequent patches with their respective SPDX license identifiers and
let us remove repetitive license boiler plate.
[0] https://github.com/copyleft-next/copyleft-next/blob/master/Releases/copyleft-next-0.3.1
[1] https://lore.kernel.org/lkml/1465929311-13509-1-git-send-email-mcgrof@kernel.org/
[2] https://lore.kernel.org/lkml/CA+55aFyhxcvD+q7tp+-yrSFDKfR0mOHgyEAe=f_94aKLsOu0Og@mail.gmail.com/
[3] https://lore.kernel.org/lkml/20170516232702.GL17314@wotan.suse.de/
[4] https://lkml.kernel.org/r/1495234558.7848.122.camel@linux.intel.com
[5] https://lists.fedorahosted.org/archives/list/copyleft-next@lists.fedorahosted.org/thread/JTGV56DDADWGKU7ZKTZA4DLXTGTLNJ57/#SQMDIKBRAVDOCT4UVNOOCRGBN2UJIKHZ
[6] https://spdx.org/licenses/copyleft-next-0.3.0.html
[7] https://spdx.org/licenses/copyleft-next-0.3.1.html
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Kuno Woudt <kuno@frob.nl>
Cc: Richard Fontana <fontana@sharpeleven.org>
Cc: copyleft-next@lists.fedorahosted.org
Cc: Ciaran Farrell <Ciaran.Farrell@suse.com>
Cc: Christopher De Nicolo <Christopher.DeNicolo@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver adds pinctrl support for Intel Moorefield. The IP block
which is called Family-Level Interface Shim is a separate entity in SoC.
The GPIO driver, which supports this pinctrl interface, will be
submitted separately.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When failed to register irq in xgene_enet_open() for opening device,
napi isn't disabled. When open xgene device next time, it will reports
a invalid opcode issue. Fix it. Only be compiled, not be tested.
Fixes: aeb20b6b3f ("drivers: net: xgene: fix: ifconfig up/down crash")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221107043032.357673-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In accordance with [1] the DMA-able memory buffers must be
cacheline-aligned otherwise the cache writing-back and invalidation
performed during the mapping may cause the adjacent data being lost. It's
specifically required for the DMA-noncoherent platforms [2]. Seeing the
opal_dev.{cmd,resp} buffers are implicitly used for DMAs in the NVME and
SCSI/SD drivers in framework of the nvme_sec_submit() and sd_sec_submit()
methods respectively they must be cacheline-aligned to prevent the denoted
problem. One of the option to guarantee that is to kmalloc the buffers
[2]. Let's explicitly allocate them then instead of embedding into the
opal_dev structure instance.
Note this fix was inspired by the commit c94b7f9bab ("nvme-hwmon:
kmalloc the NVME SMART log buffer").
[1] Documentation/core-api/dma-api.rst
[2] Documentation/core-api/dma-api-howto.rst
Fixes: 455a7b238c ("block: Add Sed-opal library")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221107203944.31686-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
UFS reset pin offsets are wrongly configured for SC8280XP,
correcting the same for both UFS instances here.
Signed-off-by: Anjana Hari <quic_ahari@quicinc.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # QDrive3
Link: https://lore.kernel.org/r/20221103181051.26912-1-quic_bjorande@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently ARM64_KERNEL_USES_PMD_MAPS is an unnecessary abstraction. Kernel
mapping at PMD (aka huge page aka block) level, is only applicable with 4K
base page, which makes it 2MB aligned, a necessary requirement for linear
mapping and physical memory start address. This can be easily achieved by
directly checking against base page size itself. This drops off the macro
ARM64_KERNE_USES_PMD_MAPS which is redundant.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20221108034406.2950071-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Commit 51aad1a672 ("ACPICA: Finish support for the CDAT table")
did not add utcksum.o to the acpidump Makefile by mistake.
Do that now.
Fixes: 51aad1a672 ("ACPICA: Finish support for the CDAT table")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This fixes the below dtbs_check warning:
arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dtb: pinctrl@11030000: #address-cells: 'anyOf' conditional failed, one must be fixed:
[[2]] is not of type 'object'
From schema: Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dtb: pinctrl@11030000: #address-cells: 'anyOf' conditional failed, one must be fixed:
[[2]] is not of type 'object'
From schema: Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dtb: pinctrl@11030000: #address-cells: 'anyOf' conditional failed, one must be fixed:
[[2]] is not of type 'object'
From schema: Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
Drop #address-cells properties from pinctrl nodes as they have no
addressed child nodes.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20221107172953.63218-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Link: https://lore.kernel.org/r/20221107172953.63218-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The preferred form for Renesas' compatible strings is:
"<vendor>,<family>-<module>"
Somehow the compatible string for the r9a09g011 I2C IP was upstreamed
as renesas,i2c-r9a09g011 instead of renesas,r9a09g011-i2c, which
is really confusing, especially considering the generic fallback
is renesas,rzv2m-i2c.
The first user of renesas,i2c-r9a09g011 in the kernel is not yet in
a kernel release, it will be in v6.1, therefore it can still be
fixed in v6.1.
Even if we don't fix it before v6.2, I don't think there is any
harm in making such a change.
s/renesas,i2c-r9a09g011/renesas,r9a09g011-i2c/g for consistency.
Fixes: 54ac6794df ("arm64: dts: renesas: r9a09g011: Add i2c nodes")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20221107165027.54150-3-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The DeviceTree Specification v0.3 specifies that the cache node
'cache-level' property is 'required'. Cf. s3.8 Multi-level and Shared
Cache Nodes.
Update the Device Trees accordingly.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20221107155825.1644604-19-pierre.gondois@arm.com
[geert: Update description]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Although the HW User Manual for RZ/V2M states in the "Address Map"
section that the interrupt controller is assigned addresses starting
from 0x82000000, the memory locations from 0x82000000 0x0x8200FFFF
are marked as reserved in the "Interrupt Controller (GIC)" section
and are currently not used by the device tree, leading to the below
warning:
arch/arm64/boot/dts/renesas/r9a09g011.dtsi:51.38-63.5: Warning
(simple_bus_reg): /soc/interrupt-controller@82000000: simple-bus unit
address format error, expected "82010000"
Fix the unit address accordingly.
Fixes: fb1929b98f ("arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20221103230648.53748-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
As serial communication requires a clean clock signal, the Serial
Communication Interfaces with FIFO (SCIF) are clocked by a clock that is
not affected by Spread Spectrum or Fractional Multiplication.
Hence change the clock input for the SCIF Baud Rate Generator internal
clock from the S0D3_PER clock to the SASYNCPERD1 clock (which has the
same clock rate), cfr. R-Car S4-8 Hardware User's Manual rev. 0.81.
Fixes: c62331e822 ("arm64: dts: renesas: Add Renesas R8A779F0 SoC support")
Fixes: 4075314425 ("arm64: dts: renesas: r8a779f0: Add SCIF nodes")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221103143440.46449-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
As serial communication requires a clean clock signal, the High Speed
Serial Communication Interfaces with FIFO (HSCIF) are clocked by a clock
that is not affected by Spread Spectrum or Fractional Multiplication.
Hence change the clock input for the HSCIF Baud Rate Generator internal
clock from the S0D3_PER clock to the SASYNCPERD1 clock (which has the
same clock rate), cfr. R-Car S4-8 Hardware User's Manual rev. 0.81.
Fixes: 01a787f78b ("arm64: dts: renesas: r8a779f0: Add HSCIF nodes")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221103143440.46449-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The DeviceTree Specification v0.3 specifies that the cache node
"compatible" and "cache-level" properties are required.
Cf. s3.8 Multi-level and Shared Cache Nodes
The 'cache-unified' property should be present if one of the properties
for unified cache is present ('cache-size', ...).
Update the relevant device trees nodes accordingly.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20221107155825.1644604-6-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
As serial communication requires a clean clock signal, the Serial
Communication Interfaces with FIFO (SCIF) are clocked by a clock that is
not affected by Spread Spectrum or Fractional Multiplication.
Hence change the parent clocks for the SCIF modules from the S0D12_PER
clock to the SASYNCPERD4 clock (which has the same clock rate), cfr.
R-Car S4-8 Hardware User's Manual rev. 0.81.
Fixes: 24aaff6a6c ("clk: renesas: cpg-mssr: Add support for R-Car S4-8")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221103143440.46449-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
As serial communication requires a clean clock signal, the High Speed
Serial Communication Interfaces with FIFO (HSCIF) are clocked by a clock
that is not affected by Spread Spectrum or Fractional Multiplication.
Hence change the parent clocks for the HSCIF modules from the S0D3_PER
clock to the SASYNCPERD1 clock (which has the same clock rate), cfr.
R-Car S4-8 Hardware User's Manual rev. 0.81.
Fixes: 080bcd8d59 ("clk: renesas: r8a779f0: Add HSCIF clocks")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221103143440.46449-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
