Because the value of man->size is changed during suspend/resume process,
use mgr->mm.size instead of man->size here for lpfn checking.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914125331.2467162-1-Jun.Ma2@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Current way of checking available SQE count which is based on
HW updated SQB count could result in driver submitting an SQE
even before CQE for the previously transmitted SQE at the same
index is processed in NAPI resulting losing SKB pointers,
hence a leak. Fix this by checking a consumer index which
is updated once CQE is processed.
Fixes: 3ca6c4c882 ("octeontx2-pf: Add packet transmission support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20221107033505.2491464-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The i2sN-share properties were never documented in the dt-binding and
thus shouldn't be used. Now that the ASoC machine drivers are setting
the I2S clock sharing internally, these properties are no longer needed,
so remove them.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-8-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
One of the failure paths in the arm_pmu ACPI code is missing an early
return, permitting a NULL pointer dereference upon a memory allocation
failure.
Add the missing return.
Fixes: fe40ffdb76 ("arm_pmu: rework ACPI probing")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221108093725.1239563-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When failed to connect to and start PHY in mtk_star_enable() for opening
device, napi isn't disabled. When open mtk star device next time, it will
reports a invalid opcode issue. Fix it. Only be compiled, not be tested.
Fixes: 8c7bd5a454 ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221107012159.211387-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If lapb_register() failed when lapb device goes to up for the first time,
the NAPI is not disabled. As a result, the invalid opcode issue is
reported when the lapb device goes to up for the second time.
The stack info is as follows:
[ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442!
[ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0
[ 1958.332310][T11356] Call Trace:
[ 1958.332817][T11356] <TASK>
[ 1958.336135][T11356] lapbeth_open+0x18/0x90
[ 1958.337446][T11356] __dev_open+0x258/0x490
[ 1958.341672][T11356] __dev_change_flags+0x4d4/0x6a0
[ 1958.345325][T11356] dev_change_flags+0x93/0x160
[ 1958.346027][T11356] devinet_ioctl+0x1276/0x1bf0
[ 1958.346738][T11356] inet_ioctl+0x1c8/0x2d0
[ 1958.349638][T11356] sock_ioctl+0x5d1/0x750
[ 1958.356059][T11356] __x64_sys_ioctl+0x3ec/0x1790
[ 1958.365594][T11356] do_syscall_64+0x35/0x80
[ 1958.366239][T11356] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1958.377381][T11356] </TASK>
Fixes: 514e1150da ("net: x25: Queue received packets in the drivers instead of per-CPU queues")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221107011445.207372-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Michael Chan says:
====================
bnxt_en: Updates
This small patchset adds an improvement to the configuration of ethtool
RSS tuple hash and a PTP improvement when running in a multi-host
environment.
====================
Link: https://lore.kernel.org/r/1667780192-3700-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When using a PHC that is shared between multiple hosts,
in order to achieve consistent timestamps across all hosts,
we need to isolate the PHC from any host making frequency
adjustments.
This patch adds a non-real time mode for this purpose.
The implementation is based on a free running NIC hardware timer
which is used as the timestamper time-base. Each host implements
individual adjustments to a local timecounter based on the NIC free
running timer.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hardware is unable to realize all legal firmware interface state values
for hash_type. For example, if 4-tuple TCP_IPV4 hash is enabled,
4-tuple UDP_IPV4 hash must also be enabled. By providing the bits the
user intended to change instead of the possible illegal intermediate
states, the firmware is able to make better compromises when deciding
which bits to ignore.
With this new mechansim, we can now report the actual configured hash
back to the user. Add bnxt_hwrm_update_rss_hash_cfg() to report the
actual hash after user configuration.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extract common code into a new function. This will avoid duplication
in the next patch, which changes the update algorithm for both the P5
and legacy code paths.
No functional changes.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The DeviceTree Specification v0.3 specifies that the cache node
'compatible' and 'cache-level' properties are 'required'. Cf.
s3.8 Multi-level and Shared Cache Nodes
The 'cache-unified' property should be present if one of the
properties for unified cache is present ('cache-size', ...).
Update the Device Trees accordingly.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20221107155825.1644604-13-pierre.gondois@arm.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Xin Long says:
====================
net: add helper support in tc act_ct for ovs offloading
Ilya reported an issue that FTP traffic would be broken when the OVS flow
with ct(commit,alg=ftp) installed in the OVS kernel module, and it was
caused by that TC didn't support the ftp helper offloaded from OVS.
This patchset is to add the helper support in act_ct for OVS offloading
in kernel net/sched.
The 1st and 2nd patches move some common code into nf_conntrack_helper from
openvswitch so that they could be used by net/sched in the 4th patch (Note
there are still some other common code used in both OVS and TC, and I will
extract it in other patches). The 3rd patch extracts another function in
net/sched to make the 4th patch easier to write. The 4th patch adds this
feature in net/sched.
The user space part will be added in another patch, and with it these OVS
flows (FTP over SNAT) can be used to test this feature:
table=0, in_port=veth1,tcp,tcp_dst=2121,ct_state=-trk \
actions=ct(table=1, nat), normal
table=0, in_port=veth2,tcp,ct_state=-trk actions=ct(table=1, nat)
table=0, in_port=veth1,tcp,ct_state=-trk actions=ct(table=0, nat)
table=0, in_port=veth1,tcp,ct_state=+trk+rel actions=ct(commit, nat),normal
table=0, in_port=veth1,tcp,ct_state=+trk+est actions=veth2"
table=1, in_port=veth1,tcp,tcp_dst=2121,ct_state=+trk+new \
actions=ct(commit, nat(src=7.7.16.1), alg=ftp),normal"
table=1, in_port=veth1,tcp,tcp_dst=2121,ct_state=+trk+est actions=veth2"
table=1, in_port=veth2,tcp,ct_state=+trk+est actions=veth1"
====================
Link: https://lore.kernel.org/r/cover.1667766782.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch is to add helper support in act_ct for OVS actions=ct(alg=xxx)
offloading, which is corresponding to Commit cae3a26275 ("openvswitch:
Allow attaching helpers to ct action") in OVS kernel part.
The difference is when adding TC actions family and proto cannot be got
from the filter/match, other than helper name in tb[TCA_CT_HELPER_NAME],
we also need to send the family in tb[TCA_CT_HELPER_FAMILY] and the
proto in tb[TCA_CT_HELPER_PROTO] to kernel.
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch is to make the err path simple by calling tcf_ct_params_free(),
so that it won't cause problems when more members are added into param and
need freeing on the err path.
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move ovs_ct_add_helper from openvswitch to nf_conntrack_helper and
rename as nf_ct_add_helper, so that it can be used in TC act_ct in
the next patch.
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move ovs_ct_helper from openvswitch to nf_conntrack_helper and rename
as nf_ct_helper so that it can be used in TC act_ct in the next patch.
Note that it also adds the checks for the family and proto, as in TC
act_ct, the packets with correct family and proto are not guaranteed.
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to what we do with the hash indirection table [1], when network
flow classification rules are forwarding traffic to channels greater
than the requested number of channels, fail the operation.
Without this, traffic could be directed to channels which no longer
exist (dropped) after changing number of channels.
[1] commit d4ab428627 ("ethtool: correctly ensure {GS}CHANNELS doesn't conflict with GS{RXFH}")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/r/20221106123127.522985-1-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert Qualcomm QCS404 pin controller bindings to DT schema. Keep the
parsing of pin configuration subnodes consistent with other Qualcomm
schemas (children named with '-state' suffix, their children with
'-pins').
Changes during conversion: add sdc1_rclk pins (used in qcs404-evb.dtsi).
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221104161131.57719-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Convert Qualcomm MSM8916 pin controller bindings to DT schema. Keep the
parsing of pin configuration subnodes consistent with other Qualcomm
schemas (children named with '-state' suffix, their children with
'-pins').
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221024002356.28261-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
On i.MX8QM/QXP/DXL SoCs, even a GPIO is selected as the wakeup source,
the GPIO block will be powered off when system enters into suspend
state. This can greatly reduce the power consumption of suspend state
because the whole partition can be shutdown. This is called PAD wakeup
feature on i.MX8x platform.
This patch adds the noirq suspend/resume hooks and uses the pad wakeup
feature as the default wakeup method for GPIO modules on
i.MX8QM/QXP/DXL platforms.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20221027130859.1444412-6-shenwei.wang@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
add the logic to configure the pad wakeup function via
the pin_config_set handler.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20221027130859.1444412-5-shenwei.wang@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently after the hardware restart triggered from the driver, the
station interface connection remains intact, since a disconnect trigger
is not sent to userspace. This can lead to a problem in targets where
the wifi mac sequence is added by the firmware.
After the target restart, its wifi mac sequence number gets reset to
zero. Hence AP to which our device is connected will receive frames with
a wifi mac sequence number jump to the past, thereby resulting in the
AP dropping all these frames, until the frame arrives with a wifi mac
sequence number which AP was expecting.
To avoid such frame drops, its better to trigger a station disconnect
upon target hardware restart which can be done with API
ieee80211_reconfig_disconnect exposed to mac80211.
The other targets are not affected by this change, since the hardware
params flag is not set.
Reported-by: kernel test robot <lkp@intel.com>
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221104085403.11025-1-quic_youghand@quicinc.com
Rather than getting some hard to debug uaf, add some warns to hopefully
catch issues with userfault_count being non-zero when destroying the
object. Also if we somehow add an object to lmem_userfault_list that
somehow doesn't map lmem.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7469
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107165414.56970-2-matthew.auld@intel.com
In the fault handler, make sure we check if the BO maps lmem after
we schedule the migration, since the current resource might change from
lmem to smem, if the pages are in the non-cpu visible portion of lmem.
This then leads to adding the object to the lmem_userfault_list even
though the current resource is no longer lmem. If we then destroy the
object, the list might still contain a link to the now free object, since
we only remove it if the object is still in lmem.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7469
Fixes: ad74457a6b ("drm/i915/dgfx: Release mmap on rpm suspend")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107165414.56970-1-matthew.auld@intel.com
If we got a page pool use it as much as possible.
If we can't get more pages from the pool allocate as much as possible.
Only if that still doesn't work reduce the order and try again.
v2: minor cleanups
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107195808.1873-1-christian.koenig@amd.com
To catch missing SIGTRAP we employ a WARN in __perf_event_overflow(),
which fires if pending_sigtrap was already set: returning to user space
without consuming pending_sigtrap, and then having the event fire again
would re-enter the kernel and trigger the WARN.
This, however, seemed to miss the case where some events not associated
with progress in the user space task can fire and the interrupt handler
runs before the IRQ work meant to consume pending_sigtrap (and generate
the SIGTRAP).
syzbot gifted us this stack trace:
| WARNING: CPU: 0 PID: 3607 at kernel/events/core.c:9313 __perf_event_overflow
| Modules linked in:
| CPU: 0 PID: 3607 Comm: syz-executor100 Not tainted 6.1.0-rc2-syzkaller-00073-g88619e77b33d #0
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
| RIP: 0010:__perf_event_overflow+0x498/0x540 kernel/events/core.c:9313
| <...>
| Call Trace:
| <TASK>
| perf_swevent_hrtimer+0x34f/0x3c0 kernel/events/core.c:10729
| __run_hrtimer kernel/time/hrtimer.c:1685 [inline]
| __hrtimer_run_queues+0x1c6/0xfb0 kernel/time/hrtimer.c:1749
| hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811
| local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1096 [inline]
| __sysvec_apic_timer_interrupt+0x17c/0x640 arch/x86/kernel/apic/apic.c:1113
| sysvec_apic_timer_interrupt+0x40/0xc0 arch/x86/kernel/apic/apic.c:1107
| asm_sysvec_apic_timer_interrupt+0x16/0x20 arch/x86/include/asm/idtentry.h:649
| <...>
| </TASK>
In this case, syzbot produced a program with event type
PERF_TYPE_SOFTWARE and config PERF_COUNT_SW_CPU_CLOCK. The hrtimer
manages to fire again before the IRQ work got a chance to run, all while
never having returned to user space.
Improve the WARN to check for real progress in user space: approximate
this by storing a 32-bit hash of the current IP into pending_sigtrap,
and if an event fires while pending_sigtrap still matches the previous
IP, we assume no progress (false negatives are possible given we could
return to user space and trigger again on the same IP).
Fixes: ca6c21327c ("perf: Fix missing SIGTRAPs")
Reported-by: syzbot+b8ded3e2e2c6adde4990@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221031093513.3032814-1-elver@google.com
The previous attempt to augment carrier_down (see Link)
was not met with much enthusiasm so let's do the simple
thing of exposing what some devices already maintain.
Add a common ethtool statistic for link going down.
Currently users have to maintain per-driver mapping
to extract the right stat from the vendor-specific ethtool -S
stats. carrier_down does not fit the bill because it counts
a lot of software related false positives.
Add the statistic to the extended link state API to steer
vendors towards implementing all of it.
Implement for bnxt and all Linux-controlled PHYs. mlx5 and (possibly)
enic also have a counter for this but I leave the implementation
to their maintainers.
Link: https://lore.kernel.org/r/20220520004500.2250674-1-kuba@kernel.org
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20221104190125.684910-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We are able to power down the GPU and audio via the GPU driver
so flag these asics as supporting runtime pm.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221108084746.583058-1-evan.quan@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the Acer Switch One 10 S1003, for which there already is a quirk,
the Acer Switch V 10 (SW5-017) has a 800x1280 portrait screen mounted
in the tablet part of a landscape oriented 2-in-1. Add a quirk for this.
Cc: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20221106215052.66995-1-hdegoede@redhat.com
Headers in include/ should be included using the system header #include
syntax.
Fixes: 887a193b4f ("drm/i915/pxp: add huc authentication and loading command")
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Vitaly Lubart <vitaly.lubart@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107140454.2680954-1-jani.nikula@intel.com
* git://linuxtv.org/sailus/media_tree: (47 commits)
media: i2c: ov4689: code cleanup
media: ov9650: Drop platform data code path
media: ov7670: Drop unused include
media: ov2640: Drop legacy includes
media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver
media: dt-bindings: add bindings for Toshiba TC358746
phy: dphy: add support to calculate the timing based on hs_clk_rate
phy: dphy: refactor get_default_config
v4l: subdev: Warn if disabling streaming failed, return success
dw9768: Enable low-power probe on ACPI
media: i2c: imx290: Replace GAIN control with ANALOGUE_GAIN
media: i2c: imx290: Add crop selection targets support
media: i2c: imx290: Factor out format retrieval to separate function
media: i2c: imx290: Move registers with fixed value to init array
media: i2c: imx290: Create controls for fwnode properties
media: i2c: imx290: Implement HBLANK and VBLANK controls
media: i2c: imx290: Split control initialization to separate function
media: i2c: imx290: Fix max gain value
media: i2c: imx290: Add exposure time control
media: i2c: imx290: Define more register macros
...
Current configuration in the document is outdated and doesn't work. Update
it to match the configuration described in the following commit:
commit 9b4a9b31b9 ("media: vimc: Enable set resolution at the scaler src pad")
Fixed commit description:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There are three cases of power domain management on supported platforms:
1) CAMSS on MSM8916, where a single VFE power domain is operated outside
of the camss device driver,
2) CAMSS on MSM8996 and SDM630/SDM660, where two VFE power domains are
managed separately by the camss device driver, the power domains are
linked and unlinked on demand by their functions vfe_pm_domain_on()
and vfe_pm_domain_off() respectively,
3) CAMSS on SDM845 and SM8250 platforms, and there are two VFE power
domains and their parent power domain TITAN_TOP, the latter one
shall be turned on prior to turning on any of VFE power domains.
Due to a previously missing link between TITAN_TOP and VFEx power domains
in the latter case, which is now fixed by [1], it was decided always to
turn on all found VFE power domains and TITAN_TOP power domain, even if
just one particular VFE is needed to be enabled or none of VFE power
domains are required, for instance the latter case is when vfe_lite is in
use. This misusage becomes more incovenient and clumsy, if next generations
are to be supported, for instance CAMSS on SM8450 has three VFE power
domains.
The change splits the power management support for platforms with TITAN_TOP
parent power domain, and, since 'power-domain-names' property is not
present in camss device tree nodes, the assumption is that the first
N power domains from the 'power-domains' list correspond to VFE power
domains, and, if the number of power domains is greater than number of
non-lite VFEs, then the last power domain from the list is the TITAN_TOP
power domain.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
VFE lite IPs are found on CAMSS with TITAN_TOP power domains, and in
some aspects these types of VFEs are different, in particular there
is no need to enable VFE power domains to operate over VFE lite IPs.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The change to dynamically allocated power domains neglected a case of
CAMSS on MSM8916 platform, where a single VFE power domain is neither
attached, linked or managed in runtime in any way explicitly.
This is a special case and it shall be kept as is, because the power
domain management is done outside of the driver, and it's very different
in comparison to all other platforms supported by CAMSS.
Fixes: 6b1814e269 ("media: camss: Allocate power domain resources dynamically")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
It is required to return the received buffers, if streaming can not be
started. For instance media_pipeline_start() may fail with EPIPE, if
a link validation between entities is not passed, and in such a case
a user gets a kernel warning:
WARNING: CPU: 1 PID: 520 at drivers/media/common/videobuf2/videobuf2-core.c:1592 vb2_start_streaming+0xec/0x160
<snip>
Call trace:
vb2_start_streaming+0xec/0x160
vb2_core_streamon+0x9c/0x1a0
vb2_ioctl_streamon+0x68/0xbc
v4l_streamon+0x30/0x3c
__video_do_ioctl+0x184/0x3e0
video_usercopy+0x37c/0x7b0
video_ioctl2+0x24/0x40
v4l2_ioctl+0x4c/0x70
The fix is to correct the error path in video_start_streaming() of camss.
Fixes: 0ac2586c41 ("media: camss: Add files which handle the video device nodes")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
1. DMA and EDU are mutually exclusive: don't allow both at the same time
2. Require interrupt-names for 2+ interrupts to avoid /guessing/
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221104085316.24499-1-zajec5@gmail.com
Add tests for memblock_alloc_exact_nid_raw() where the simulated physical
memory is set up with multiple NUMA nodes. Additionally, all but one of
these tests set nid != NUMA_NO_NODE. All tests are run for both top-down
and bottom-up allocation directions.
The tested scenarios are:
Range unrestricted:
- region cannot be allocated:
+ there are no previously reserved regions, but requested node is
too small
+ the requested node is fully reserved
+ the requested node is partially reserved and does not have
enough space
+ none of the nodes have enough memory to allocate the region
Range restricted:
- region can be allocated in the specific node requested without
dropping min_addr:
+ the range fully overlaps with the node, and there are adjacent
reserved regions
- region cannot be allocated:
+ range partially overlaps with two different nodes, where the
second node is the requested node
+ range overlaps with multiple nodes along node boundaries, and
the requested node starts after max_addr
+ nid is set to NUMA_NO_NODE and the total range can fit the
region, but the range is split between two nodes and everything
else is reserved
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/51b14da46e6591428df3aefc5acc7dca9341a541.1667802195.git.remckee0@gmail.com
Add tests for memblock_alloc_exact_nid_raw() where the simulated physical
memory is set up with multiple NUMA nodes. Additionally, all of these
tests set nid != NUMA_NO_NODE. These tests are run with a bottom-up
allocation direction.
The tested scenarios are:
Range unrestricted:
- region can be allocated in the specific node requested:
+ there are no previously reserved regions
+ the requested node is partially reserved but has enough space
Range restricted:
- region can be allocated in the specific node requested after dropping
min_addr:
+ range partially overlaps with two different nodes, where the
first node is the requested node
+ range partially overlaps with two different nodes, where the
requested node ends before min_addr
+ range overlaps with multiple nodes along node boundaries, and
the requested node ends before min_addr
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/935f0eed5e06fd44dc67d9f49b277923d7896bd3.1667802195.git.remckee0@gmail.com
Add tests for memblock_alloc_exact_nid_raw() where the simulated physical
memory is set up with multiple NUMA nodes. Additionally, all of these
tests set nid != NUMA_NO_NODE. These tests are run with a top-down
allocation direction.
The tested scenarios are:
Range unrestricted:
- region can be allocated in the specific node requested:
+ there are no previously reserved regions
+ the requested node is partially reserved but has enough space
Range restricted:
- region can be allocated in the specific node requested after dropping
min_addr:
+ range partially overlaps with two different nodes, where the
first node is the requested node
+ range partially overlaps with two different nodes, where the
requested node ends before min_addr
+ range overlaps with multiple nodes along node boundaries, and
the requested node ends before min_addr
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/2cc0883243d68ddc3faf833d2d9e86f48534c1d7.1667802195.git.remckee0@gmail.com
Add TEST_F_EXACT flag, which specifies that tests should run
memblock_alloc_exact_nid_raw(). Introduce range tests for
memblock_alloc_exact_nid_raw() by using the TEST_F_EXACT flag to run the
range tests in alloc_nid_api.c, since memblock_alloc_exact_nid_raw() and
memblock_alloc_try_nid_raw() behave the same way when nid = NUMA_NO_NODE.
Rename tests and other functions in alloc_nid_api.c by removing "_try".
Since the test names will be displayed in verbose output, they need to
be general enough to refer to any of the memblock functions that the
tests may run.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/5a4b6d1b6130ab7375314e1c45a6d5813dfdabbd.1667802195.git.remckee0@gmail.com
When using wpa_supplicant v2.10, this driver is no longer able to
associate with any AP and fails in the EAPOL 4-way handshake while
sending the 2/4 message to the AP. The problem is not present in
wpa_supplicant v2.9 or older. The problem stems from HostAP commit
144314eaa ("wpa_supplicant: Send EAPOL frames over nl80211 where available")
which changes the way EAPOL frames are sent, from them being send
at L2 frames to them being sent via nl80211 control port.
An EAPOL frame sent as L2 frame is passed to the WiFi driver with
skb->protocol ETH_P_PAE, while EAPOL frame sent via nl80211 control
port has skb->protocol set to ETH_P_802_3 . The later happens in
ieee80211_tx_control_port(), where the EAPOL frame is encapsulated
into 802.3 frame.
The rsi_91x driver handles ETH_P_PAE EAPOL frames as high-priority
frames and sends them via highest-priority transmit queue, while
the ETH_P_802_3 frames are sent as regular frames. The EAPOL 4-way
handshake frames must be sent as highest-priority, otherwise the
4-way handshake times out.
Therefore, to fix this problem, inspect the skb control flags and
if flag IEEE80211_TX_CTRL_PORT_CTRL_PROTO is set, assume this is
an EAPOL frame and transmit the frame via high-priority queue just
like other ETH_P_PAE frames.
Fixes: 0eb42586cf ("rsi: data packet descriptor enhancements")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221104163339.227432-1-marex@denx.de
Variable len is being assigned and modified but it is never
used. The variable is redundant and can be removed.
Cleans up clang scan build warning:
warning: variable 'len' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221104135036.225628-1-colin.i.king@gmail.com
To detect TX or RX stuck, we implement SER (system error recovery) in
firmware to recover abnormal states of hardware, and report events to
driver. This kind of events could happen rarely per day.
SER might be true-positive or false-negative cases, and it could be failed
to recover true-positive case. We dump related registers to kernel message
at that moment and collect them from users, because they occur rarely,
randomly and hard to make sure we reproduce the same symptom. To address
problems accurately, add more registers by this patch.
It also might be false-positive cases that looks like TX or RX get stuck,
we need to dump registers from debugfs manually, so also add similar
things to debugfs as well.
Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221102014300.14091-3-pkshih@realtek.com
Dispatch is a component to decide packets forward to host, DMAC or
HAXIDMA. It contains CDT standing for CPU dispatcher, HDT standing
for host dispatcher, WDE standing for descriptor engine and PLE standing
for payload engine. STF is one kind of modes, it can be used if packet
send to hardware and doesn't need release report.
These debug port information can help to clarify the reason if
packets stuck in dispatch.
Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221102014300.14091-2-pkshih@realtek.com
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1ff34549af5ad6f7c80d5b9e11872b5499065fc1.1667336095.git.christophe.jaillet@wanadoo.fr
Channel info passed by supplicant is not given to firmware. This causes
delay (about 3seconds) due to full scan. Supplicant already provides the
channel info for the specific SSID. channel_hint carries this channel
info for the connect call back.
Patch has been verified on 43012 and 43455.
Signed-off-by: Prasanna Kerekoppa <prasanna.kerekoppa@cypress.com>
Signed-off-by: Chung-Hsien Hsu <chung-hsien.hsu@infineon.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221024085215.27616-4-ian.lin@infineon.com
