Fix afs_inode_init_from_status() to call afs_set_netfs_context() before the
switch to do file type-specific initialisation because local directory
changes don't get uploaded to the server, only stored in the cache.
This requires that the file size be set before, so move that up too.
Without this, NETFS_ICTX_SINGLE_NO_UPLOAD as set on directories gets
clobbered.
Closes: https://sashiko.dev/#/patchset/20260618074903.2374756-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260622090856.2746629-7-dhowells@redhat.com
Fixes: 6dd8093661 ("afs: Use netfslib for directories")
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Regular AFS files correctly use afs_file_aops which have release_folio
set as netfs_release_folio, so AS_RELEASE_ALWAYS is valid for them
when fscache is enabled (set via afs_vnode_set_cache()).
Symlinks and mountpoints in AFS use afs_dir_aops, which does not provide
a release_folio callback. However, afs_apply_status() unconditionally
calls mapping_set_release_always() for these.
In such case when memory management code attempts to release folios,
filemap_release_folio() checks folio_needs_release() which
returns true due to AS_RELEASE_ALWAYS being set. Since there is no
release_folio callback, it falls through to try_to_free_buffers(),
which at present expects buffer_heads to be not null. For symlinks
and mountpoints without buffer_heads, this causes pointer dereference.
[dh: Added more bits that were missed]
Fixes: eae9e78951 ("afs: Use netfslib for symlinks, allowing them to be cached")
Signed-off-by: Deepakkumar Karn <dkarn@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260622090856.2746629-6-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Add a regression test for the fsuidgid_has_mapping() check in
vfs_tmpfile(). It idmaps a detached tmpfs mount so that the
caller-visible id range [0, 10000) maps onto the on-disk range
[10000, 20000) and checks that:
- a caller whose fsuid/fsgid fall outside that range cannot create an
O_TMPFILE through the mount and gets -EOVERFLOW instead of an inode
owned by (uid_t)-1;
- a mapped caller can create an O_TMPFILE, link it into the namespace,
and the ownership round-trips through the mount idmap: it is reported
as 0 through the mount and stored as 10000 on the underlying tmpfs.
The test runs entirely as root and uses setfsuid()/setfsgid() to become
the unmapped caller, so it needs no helper user. The layer directory is
world-writable so that an unmapped caller still clears the directory
permission check and reaches the fsuidgid_has_mapping() test.
Link: https://patch.msgid.link/20260615-work-idmapped-tmpfile-v1-2-754a94d81f83@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The error codes on these paths are only set on the first iteration
through the loop. Set the correct error code on every iteration.
Fixes: 0a5143f2f8 ("afs: Implement VL server rotation")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260622090856.2746629-3-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
vfs_tmpfile() never checked that the caller's fsuid and fsgid map into
the filesystem. On an idmapped mount whose idmapping does not cover the
caller's fs{u,g}id, the ->tmpfile() instance initializes the new inode
through inode_init_owner(), where mapped_fsuid()/mapped_fsgid() return
INVALID_UID/INVALID_GID, and the tmpfile ends up owned by (uid_t)-1.
Every other creation path already refuses this: may_o_create() (O_CREAT)
and may_create_dentry() (mkdir, mknod, symlink, link) bail out with
-EOVERFLOW via fsuidgid_has_mapping() precisely so that an object cannot
be created with an owner the filesystem cannot represent. An O_TMPFILE
is no exception: it is created I_LINKABLE and linkat(2) can splice it
into the namespace afterwards, so the same guarantee must hold.
Add the missing fsuidgid_has_mapping() check to vfs_tmpfile(). On a
non-idmapped mount the caller's fs{u,g}id always map in the superblock's
user namespace, so this is a no-op there and only takes effect on an
idmapped mount that does not map the caller. It applies to every
filesystem that sets FS_ALLOW_IDMAP and implements ->tmpfile() (tmpfs,
ext4, btrfs, xfs, f2fs, ...), and to overlayfs, whose upper-layer
tmpfile creation funnels through vfs_tmpfile() via backing_tmpfile_open().
Fixes: 8e5389132a ("fs: introduce fsuidgid_has_mapping() helper")
Link: https://patch.msgid.link/20260615-work-idmapped-tmpfile-v1-1-754a94d81f83@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The cache manager callback path now attaches the server record to an
incoming call through the rxrpc peer's app data. That association is
not guaranteed to exist for every callback request, and most callback
handlers already tolerate that case.
Make CB.InitCallBackState3 follow the same pattern by checking whether a
server record was attached before using it. If the peer is not mapped
to a server record, trace the request and ignore it, matching the
existing behaviour for other unmatched callback requests.
This keeps the callback handler consistent with the rest of the cache
manager service and avoids depending on peer state that may not be
available for a given request.
Fixes: 40e8b52fe8 ("afs: Use the per-peer app data provided by rxrpc")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Nan Li <tonanli66@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260622090856.2746629-2-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
On i.MX8MQ, the MIPI CSI reset lines are active-low and not self-clearing.
Writing '0' asserts reset and it remains asserted until explicitly
deasserted by software.
This driver previously treated the MIPI CSI reset signals as active-high,
which led to incorrect reset assert/deassert sequencing. This issue was
exposed by commit 6d79bb8fd2 ("media: imx8mq-mipi-csi2: Explicitly
release reset").
Fix this by reflecting the correct reset polarity and ensuring proper
reset handling.
Fixes: c979dbf599 ("reset: imx7: Add support for i.MX8MQ IP block variant")
Cc: stable@vger.kernel.org # 6d79bb8fd2: media: imx8mq-mipi-csi2: Explicitly release reset
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Robby Cai <robby.cai@nxp.com>
Reviewed-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
In sunxi_reset_init(), when ioremap() fails, the memory region obtained
via request_mem_region() is not released, leading to a resource leak.
Add an err_mem_region label to properly release the memory region before
freeing the data structure.
Fixes: 8f1ae77f46 ("reset: Add Allwinner SoCs Reset Controller Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add COMBOPHY_RESET definition at index 38 for the combo PHY reset
control on Altera Agilex5 SoCs. This reset is used by peripherals
such as the SD/eMMC controller that share the combo PHY.
Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
According to SpacemiT K3's updated docs, the USB2 ahb reset and USB2 bus
clock enable bit was wrongly swapped, the correct one should be:
Register : APMU_USB_CLK_RES_CTRL
bit[1] : usb2_port_bus_clk_en
bit[0] : usb2_port_ahb_rstn
Fixes: a0e0c2f8c5 ("reset: spacemit: k3: Decouple composite reset lines")
Reported-by: Junzhong Pan <panjunzhong@linux.spacemit.com>
Signed-off-by: Yixun Lan <dlan@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Building mlx5 on s390 shows a rather high stack usage that can exceed
the warning limit when that is set to a lower but still reasonable value:
drivers/infiniband/hw/mlx5/wr.c:1051:5: error: stack frame size (1328) exceeds limit (1280) in 'mlx5_ib_post_send' [-Werror,-Wframe-larger-than]
The problem here is 'struct ib_reg_wr' on the stack of
handle_reg_mr_integrity(), which gets inlined into mlx5_ib_post_send()
along with a number of smaller functions.
Keeping the inner function out of line like gcc does avoids the
warning and reduces the total stack usage in other functions called
from mlx5_ib_post_send(), though handle_reg_mr_integrity() itself
still has the same problem as before.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260612201611.4127750-1-arnd@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Probe information replies contain a firmware-provided element count. IPC3
uses that count to copy an array, then returns the unchecked count to its
caller. A short reply can therefore make the caller walk beyond the copied
array.
IPC4 similarly uses the count both to allocate the destination array and
to walk the reply. On 32-bit systems the allocation size can wrap, while on
all systems an excessive count reads beyond the reply payload.
Validate each count against the actual reply size before copying or
allocating the array, and use kcalloc() for the IPC4 allocation.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Link: https://patch.msgid.link/20260628000329.18606-1-alhouseenyousef@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
tascam_disconnect() cancels capture_work and midi_in_work before
usb_kill_anchored_urbs() kills the capture/MIDI-in URBs. Those URBs
self-resubmit, and their completion handlers reschedule the work.
A URB that completes in the small window between cancel_work_sync() and
usb_kill_anchored_urbs() therefore re-arms the work after its only
cancel. Nothing cancels it again before snd_card_free() frees the
card-private tascam structure, so the work handler then runs on freed
memory.
Kill the anchored URBs before cancelling the work; once the work is
cancelled no remaining URB can complete to re-arm it.
Fixes: c1bb0c13e4 ("ALSA: usb-audio: us144mkii: Implement audio capture and decoding")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260701095231.1020811-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
IORING_OP_MSG_RING with IORING_MSG_RING_FLAGS_PASS allows a sender to
pass completion flags through sqe->file_index. If the sender sets
IORING_CQE_F_32 in file_index, the target-side completion path treats it
as a 32b CQE and writes big_cqe[0] and big_cqe[1] into the CQ ring
regardless of whether the target ring was created with
IORING_SETUP_CQE32 or IORING_SETUP_CQE_MIXED.
On a normal 16b CQE ring, this writes 16 extra bytes (two u64 big_cqe
fields) into the next CQE slot in the ring buffer. As the receiving ring
doesn't understand 32b CQEs, this is incorrect and they should be
rejected.
Fixes: cbeb47a7b5 ("io_uring/msg_ring: Pass custom flags to the cqe")
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
Link: https://patch.msgid.link/20260701081145.196730-1-mlbnkm1@gmail.com
[axboe: edit commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
get_unmapped_area() returns -ENOMEM when io_uring_validate_mmap_request()
fails, but validation errors are -EINVAL. Propagate that errno to
userspace, like io_uring_mmap() already does.
Signed-off-by: Yi Xie <xieyi@kylinos.cn>
Link: https://patch.msgid.link/20260630091206.126206-1-xieyi@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__xfs_buf_ioend can only resubmit the buffer for asynchronous
writes, which means the retry handling xfs_buf_iowait is not needed.
Because of this can stop returning a value from __xfs_buf_ioend and
just release the buffer for async I/O that does not require retries.
Also drop the __-prefix now that the semantics are straight forward.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Synchronous readers and writers already run __xfs_buf_ioend from
xfs_buf_iowait after being woken through bp->b_iowait, so we
should not call it here, which can lead to double completions.
Fixes: 4b90de5bc0 ("xfs: reduce context switches for synchronous buffered I/O")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
There are two callers of xfs_buf_ioend, one of which always has the
XBF_ASYNC flag set. Open code the logic in both callers to prepare for a
bug fix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Move setting the ASYNC flag into xfs_buf_ioend_fail, assert that the
buffer is locked as expected, and drop the confusing _ioend in the
name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Commit 292db66afd ("ACPICA: Unbreak tools build after switching over
to strscpy_pad()") added an #ifdef based on a __KERNEL__ check which is
sort of nasty to the acpi_ut_safe_strncpy() definition to unbreak ACPICA
tools builds broken by commit 97f7d3f9c9 ("ACPICA: Replace strncpy()
with strscpy_pad() in acpi_ut_safe_strncpy()"). However, that #ifdef
effectively produces dead code when tools are built because they don't
call acpi_ut_safe_strncpy().
Accordingly, drop the existing definition of acpi_ut_safe_strncpy() and
define it as a strscpy_pad() alias.
Fixes: 292db66afd ("ACPICA: Unbreak tools build after switching over to strscpy_pad()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ rjw: Tweak the changelog ]
Link: https://patch.msgid.link/12941764.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A hotplug or link-loss event can tear down the MST topology
(setting mgr->mst_state = false and mgr->mst_primary = NULL) concurrently
with a caller invoking drm_dp_mst_topology_queue_probe(). Since the check
is already performed under mgr->lock, the condition is not a programming
error but a valid race -- the topology was valid when the caller decided
to call this function, but was torn down before the lock was acquired.
Replace the drm_WARN_ON() with a graceful early return. This eliminates
spurious kernel warnings and the resulting compositor crashes observed
when connecting/disconnecting DP MST monitors, while keeping the correct
behavior of doing nothing when MST is not active. A drm_dbg_mst() trace
is added so the skipped probe remains observable under MST debug logging.
The existing WARN_ON(mgr->mst_primary) in drm_dp_mst_topology_mgr_set_mst()
already catches the case where the topology is initialized twice, so no
diagnostic coverage is lost.
Fixes: dbaeef363e ("drm/dp_mst: Add a helper to queue a topology probe")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Jonas Emilsson <jonas.emilsson@gmail.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/all/20260503034533.1023686-1-jonas.emilsson@gmail.com
Acked-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260622140532.526722-1-luciano.coelho@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
xlog_do_recovery_pass() may return before setting first_bad. The caller
must distinguish that case from an error at a valid log block, including
block zero after the log wraps.
Initialize first_bad to XFS_BUF_DADDR_NULL and test it explicitly before
treating the error as a torn write.
Fixes: 7088c4136f ("xfs: detect and trim torn writes during log recovery")
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: syzbot+b7dfbed0c6c2b5e9fd34@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b7dfbed0c6c2b5e9fd34
Cc: stable@vger.kernel.org # v4.5
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
If xfs_metadir_create() fails in xfs_dqinode_metadir_create(), the current
code returns directly, leaking the allocated update and transaction state.
If the subsequent commit fails, the caller-owned inode reference is left
behind.
Fix this memory leak by routing the create failure path through
xfs_metadir_cancel(). For both create and commit failures, finish and
release any inode returned to the caller, mirroring the unwind pattern in
xfs_metadir_mkdir().
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. Runtime validation
used kprobe fault injection during `mount -o uquota` on a metadir XFS
image. Injecting xfs_metadir_create() reproduced the old active-update path
that left mount stuck later in mount setup; after this change, the same
injection reported cancel_hits=1 and irele_hits=1. Injecting
xfs_metadir_commit() exercised the old inode-reference leak path; after
this change, it reported irele_hits=1.
Fixes: e80fbe1ad8 ("xfs: use metadir for quota inodes")
Cc: stable@vger.kernel.org # v6.13
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_qm_dqpurge() gets a locked buffer from xfs_dquot_use_attached_buf().
If xfs_qm_dqflush() fails, the error path skips xfs_buf_relse() and then
calls xfs_dquot_detach_buf(), which tries to lock the same buffer again.
Release the buffer after xfs_qm_dqflush() returns so the error path drops
the caller hold and unlocks the buffer before the dquot is detached,
matching the other dqflush callers.
Fixes: a40fe30868 ("xfs: separate dquot buffer reads from xfs_dqflush")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Yingjie Gao <gaoyingjie@uniontech.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
We should treat the buffer that caused a shutdown the same as handling
buffers after a shutdown, so use the same stale && !DONE logic here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
This better integrates with the other failure handling in xfs_buf_submit,
and prepares for a better API in xfs_buf_ioend_fail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The pack allocator only flushes predictors when reusing a dirty pack for
cBPF, eBPF allocations never trigger a flush. Currently, eBPF picks the
first free pack, which could be a clean pack. As an optimization, leaving
a clean pack for cBPF can avoid flushes.
Prefer dirty packs for eBPF and keep clean packs free for cBPF. This
mirrors the existing cBPF preference for clean packs: each program kind
prefers the pack that avoids an extra flush, and falls back to the other
kind only when no preferred pack has room. eBPF reuse of a dirty pack is
harmless since eBPF being privileged does not flush.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently BPF pack allocator picks the chunks from the first available
pack. While this is okay, it naturally leads to more frequent flushes
when there are multiple packs in the system that weren't used since the
last flush.
As an optimization prefer allocating the new programs from packs that
are unused since last flush. When all packs are dirty, allocation forces
a flush and marks all packs clean.
Below are some future optimizations ideas:
1. Currently, the "dirty" tracking is only done at the pack-level.
Flush frequency can further be reduced with chunk-level tracking.
This requires a new bitmap per-pack to track the dirty state.
2. IBPB flush is done on all CPUs, even if only a single CPU ran the
BPF program. On a system with hundreds of CPUs this could be a
major bottleneck forcing hundreds of IPIs to deliver the flush.
The solution is to track the CPUs where a BPF program ran, and
issue IBPB only on those CPUs.
3. Avoid IBPB when flush is already done at other sources (e.g.
context switch).
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_prog_pack_alloc() issues IBPB on all CPUs on every cBPF allocation,
even when reusing chunks from an existing pack where no new memory was
touched since the last IBPB.
Since IBPB on all CPUs is heavy, Dave Hansen suggested to track allocation
since last IBPB, and only issue IBPB at reuse for the chunks that have not
seen an IBPB since they were last freed.
Track per-pack whether an IBPB is needed via arch_flush_needed. Set it when
allocating a chunk, reset on IBPB flush. On reuse, conditionally issue the
flush. Since IBPB invalidates all BTB entries, clear the flag on all packs
after flushing.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently predictor flush on memory reuse is done for all BPF JIT
allocations, but only cBPF programs can be loaded by an unprivileged user.
eBPF is privileged by default, and flushing predictors for all CPUs on
every eBPF reuse penalizes the common case for no security benefit.
eBPF allocations can be frequent on busy systems, only flush predictors
for cBPF programs. Trampoline and dispatcher allocations also skip the
flush as they are eBPF-only.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Enable hardening against JIT spraying when Spectre-v2 mitigations are in
use. Specifically, issue an IBPB flush on BPF JIT memory reuse. Skip
enabling the IBPB flush if the BPF dispatcher is already using a retpoline
sequence.
This hardening applies only when BPF-JIT is in use. Guard the enabling
under CONFIG_BPF_JIT so that bugs.c still builds with CONFIG_BPF_JIT=n.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The BPF JIT allocator packs many small programs into larger executable
allocations and reuses space within those allocations as programs are
loaded and freed. When fresh code is written into space that a previous
program occupied, an indirect jump into the new program can reuse a branch
prediction left behind by the old one.
Flush the indirect branch predictors before reusing JIT memory so that
indirect jumps into a newly written program don't reuse predictions from an
old program that occupied the same space.
Introduce bpf_arch_pred_flush_enabled static key and bpf_arch_pred_flush
static call for flushing the branch predictors on JIT memory reuse.
Architectures that need a flush, can update it to a predictor flush
function. By default, its a NOP and does not emit any CALL.
Allocations larger than a pack are not covered by this flush. That is safe
because cBPF programs (the unprivileged attack surface) are bounded well
below a pack size. Issue a warning if this assumption is ever violated
while the flush is active.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When terminating DMA transfers, active descriptors are not properly
reclaimed. Only cyclic descriptors were handled, leaving non-cyclic
descriptors and their LLI chains to be permanently leaked.
Fix by using vchan_terminate_vdesc() which handles both cyclic and
non-cyclic descriptors by adding them to desc_terminated queue for
proper cleanup.
Add pchan->desc != pchan->done check to prevent double-adding completed
descriptors, which would corrupt the list.
Fixes: 5558593087 ("dmaengine: sun6i: Add driver for the Allwinner A31 DMA controller")
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Suggested-by: Frank Li <Frank.li@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260701045733.33654-1-zenghongling@kylinos.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
HHF reset does not clear the classifier state used to identify heavy
hitters. Packets after reset can therefore be scheduled using flow
history from before the reset.
The reset operation should return the qdisc to an empty state.
Clear the heavy-hitter classifier tables when HHF is reset.
Fixes: 10239edf86 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
split_strings() walks each directory entry with strlen(). Although the
transport adds a terminator after the reply buffer, a malformed reply
without a final NUL inside its advertised length would let that walk
cross the protocol payload boundary.
Reject such replies before counting the strings. Report the protocol
violation once and return -EIO to the caller.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260626223738.43742-1-alhouseenyousef@gmail.com>
DualPI2 leaves previous classification state attached to an skb when
filter classification returns no match. The enqueue path can then act
on stale state from an earlier classification attempt.
A filter miss should fall back to the default class without reusing old
per-packet classification data.
Initialize the classification result to CLASSIC before running the
classifier. Explicit L4S, priority, and successful filter
classification can still override that default.
Fixes: 8f9516daed ("sched: Add enqueue/dequeue of dualpi2 qdisc")
Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gntalloc_ioctl_alloc() allocates the grant-id array before checking
whether the requested count fits within the global grant limit. Counts
above that limit cannot succeed, so reject them before the
user-controlled allocation reaches kcalloc().
Use a subtraction-based check while holding gref_mutex so adding the
requested count cannot wrap. Also cast the count before advancing the
per-file index so the page-size multiplication is performed in 64-bit
arithmetic.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260626223805.43781-3-alhouseenyousef@gmail.com>
The module limit and current allocation count cannot validly be
negative. Give both variables unsigned types so their representation
matches the u32 grant count supplied through the ioctl and negative
module parameter values are rejected by parameter parsing.
This also prepares the limit check for overflow-safe unsigned
arithmetic.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260626223805.43781-2-alhouseenyousef@gmail.com>
Add a HID-BPF regression check for hid_bpf_get_data() requests whose
size would overflow when added to the offset.
The new rdesc fixup callback asks for offset 2 and size ~0ULL, then
records whether the helper returns NULL. A vulnerable kernel returns a
non-NULL pointer because the runtime check wraps the addition. A fixed
kernel rejects the request. The callback records the helper result
without dereferencing any returned pointer.
The callback reports the helper result through BSS and returns 0
intentionally. hid_rdesc_fixup return values are consumed as report
descriptor fixup results, so a positive test-result value would be
interpreted as a replacement report descriptor size.
Also add KHDR_INCLUDES to the HID selftest build so hid_bpf.c sees the
current kernel UAPI HID definitions on systems whose installed headers do
not provide enum hid_report_type.
Fixes: 658ee5a64f ("HID: bpf: allocate data memory for device_event BPF programs")
Signed-off-by: Yiyang Chen <chenyy23@mails.tsinghua.edu.cn>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The HID selftest skeleton contains several struct_ops maps, but each test
usually wants to load only the programs named by that test.
load_programs() disabled auto-attach for all maps, but left struct_ops
autocreate enabled. libbpf can enable autoload for programs referenced by
autocreated struct_ops maps, so an unrelated program can be loaded and fail
even when the current test does not use it.
Disable autocreate for all struct_ops maps by default, then re-enable it
only for the maps selected by the test before loading the skeleton.
Signed-off-by: Yiyang Chen <chenyy23@mails.tsinghua.edu.cn>
Fixes: f64c1a4593 ("selftests/hid: disable struct_ops auto-attach")
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
hid_bpf_get_data() returns a pointer into the HID-BPF context data when
the caller-provided offset and size fit inside ctx->allocated_size.
The current check adds rdwr_buf_size and offset before comparing the
result against ctx->allocated_size. Since both values are unsigned, a
very large size can wrap the sum below ctx->allocated_size and make the
helper return a pointer even though the requested range is not contained
in the backing buffer.
Use check_add_overflow() to reject wrapped range ends before comparing
the requested range end against ctx->allocated_size.
Fixes: 658ee5a64f ("HID: bpf: allocate data memory for device_event BPF programs")
Signed-off-by: Yiyang Chen <chenyy23@mails.tsinghua.edu.cn>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
grant_references() allocates a private grant-reference head before
claiming references for the page directory and, for guest-owned buffers,
the data pages. The success path frees the remaining head, but claim
failures and grant_refs_for_buffer() errors return immediately.
Unwind through a common exit path so the private grant-reference head is
released even when granting fails part-way through setup. The caller
still tears down any references already stored in buf->grefs.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260629160517.29340-1-alhouseenyousef@gmail.com>
When gntdev_ioctl_map_grant_ref() fails to copy the operation result
back to userspace after successfully adding the mapping to the list,
the error path returns -EFAULT without releasing the reference
acquired by gntdev_alloc_map(). The mapping remains in priv->maps
with a refcount of 1, causing a memory leak and a dangling list
entry.
Additionally, gntdev_add_map() may modify map->index to avoid overlap
with existing mappings. Therefore, the index returned to userspace
must be obtained after gntdev_add_map() completes.
Fix this by holding the mutex across gntdev_add_map(), retrieving
the correct index, and copy_to_user(). If copy_to_user() fails,
remove the mapping from the list and release the reference while
still holding the lock.
Cc: stable@vger.kernel.org
Fix these issues by properly handling all error cases.
Fixes: 1401c00e59 ("xen/gntdev: convert priv->lock to a mutex")
Fixes: 68b025c813 ("xen-gntdev: Add reference counting to maps")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260622112541.38194-1-vulab@iscas.ac.cn>
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize now
on the __ASSEMBLER__ macro that is provided by the compilers.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260619114547.159637-1-thuth@redhat.com>
pvcalls_front_event_handler() takes req_id directly from the
backend-supplied ring response and uses it to index the fixed-size
bedata->rsp[] array for a memcpy() and a store, with no range check. A
malicious or buggy backend can set req_id past PVCALLS_NR_RSP_PER_RING
and drive an out-of-bounds write past the bedata allocation.
req_id was also declared int while the wire field rsp->req_id is u32, so
a range check on the signed value alone is insufficient: a backend
req_id of 0xffffffff becomes -1, passes a >= PVCALLS_NR_RSP_PER_RING
test and indexes bedata->rsp[-1]. Declare req_id as u32 so a single
bound covers both ends.
A backend that sends an out-of-range req_id has violated the wire
protocol, so rather than silently dropping the response, log once and
stop trusting the backend: set bedata->disabled. The event handler then
ignores further responses, and the request paths that wait for a
response return -EIO instead of blocking forever. This mirrors the
fatal-error handling xen-netback uses (xenvif_fatal_tx_err()).
The pvcalls frontend currently trusts its backend, so this is not a
classic-Xen security issue, but it matters for hardening PV frontends
against malicious backends (confidential and disaggregated deployments).
Fixes: 2195046bfd ("xen/pvcalls: implement socket command and handle events")
Suggested-by: Juergen Gross <jgross@suse.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260617014149.2647404-1-michael.bommarito@gmail.com>
Commit 28f2406838 ("pinctrl: meson: mark the GPIO controller as
sleeping") set gpio_chip.can_sleep = true to work around
gpio-shared-proxy holding a spinlock across a sleeping pinctrl config
path. That locking bug is now fixed in the shared-proxy itself ("gpio:
shared-proxy: always serialize with a sleeping mutex"), so the
controller-wide workaround is no longer needed; the meson GPIO
controller does not sleep.
meson_gpio_get/set/direction_* access MMIO through regmap. The
regmap_mmio bus uses fast I/O (spinlock) locking, so these value
callbacks do not contain sleeping operations. Since gpio_chip.can_sleep
describes the get/set value path, restore can_sleep = false.
Marking the controller sleeping also broke atomic value consumers such
as w1-gpio (1-Wire bitbang): w1_io.c runs its read time slot under
local_irq_save() and uses the non-cansleep gpiod_set_value() /
gpiod_get_value(), which with can_sleep=true trigger WARN_ON(can_sleep)
in gpiolib on every transferred bit (from w1_gpio_write_bit() /
w1_gpio_read_bit() via w1_reset_bus() and w1_search()). The printk and
stack dump inside the IRQs-off, microsecond-scale time slot destroy the
bit timing, so reset/presence detection and ROM search fail: the bus
master registers but w1_master_slave_count stays at 0 and no devices
are found. Verified on an Amlogic A113X board (DS18B20 on GPIOA_14):
with can_sleep restored to false the warnings are gone and the sensor
is detected and read again.
This must not be applied or backported without the shared-proxy locking
fix above; otherwise the original Khadas VIM3 splat returns on boards
that genuinely share a meson GPIO.
Fixes: 28f2406838 ("pinctrl: meson: mark the GPIO controller as sleeping")
Link: https://lore.kernel.org/all/20260105150509.56537-1-bartosz.golaszewski@oss.qualcomm.com/
Signed-off-by: Viacheslav Bocharov <v@baodeep.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260625115718.1678991-3-v@baodeep.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Pins 143 and 151 were not included in the PDC wakeup map. They are
normally used for PCIe2A and PCIe3a PERST# respectively, so they're
unlikely to be excercised in practice, but still add them for the sake
of completeness.
Fixes: c0e4c71a9e ("pinctrl: qcom: Introduce sc8280xp TLMM driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260626-topic-8280_pinctrl_wakeup-v1-1-2ccb267148f5@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
