Out of memory situation on driver's probe is expected to be reported to
the driver's framework with a proper -ENOMEM error code.
Fixes: 35570ac603 ("gpio: add GPIO driver for the Timberdale FPGA")
Signed-off-by: Vladimir Zapolskiy <vz@kernel.org>
Link: https://patch.msgid.link/20260630145148.4081967-1-vz@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
While the panel_type from LFP Data Block is range checked, panel_type2
is not. Add a few helpers for range checking, and use them to not only
check panel_type2, but also improve clarity and correctness in the panel
type selection.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
- Fix commit message typo (Michał)
- Add is_panel_type_pnp() (Ville)
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: 6434cf6300 ("drm/i915/bios: calculate panel type as per child device index in VBT")
Cc: stable@vger.kernel.org # v6.0+
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com> # v1
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260626140155.1389655-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit c9ebe5d2f2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Ensure the EDID provided min/max vfreq are valid. Most scenarios are
already covered (by coincidence) through the checks in
intel_vrr_is_capable() and intel_vrr_is_in_range(), but be more explicit
about it. At worst, a zero min_vfreq could lead to a division by zero in
intel_vrr_compute_vmax().
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: 117cd09ba5 ("drm/i915/display/dp: Compute VRR state in atomic_check")
Cc: stable@vger.kernel.org # v5.12+
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260625131040.1051272-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 1765cf59f5)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
- fprobe: Fix stability and spelling typos
. Fix NULL pointer dereference in fprobe_fgraph_entry(): Prevent general
protection faults by checking shadow-stack reservation bounds. Skip
mid-flight registered fprobes that were not counted during sizing.
- eprobe: Fix string pointer extraction
. Correct the casting of string pointers read from the ringbuffer to
prevent truncation of base event pointer variables when dereferencing
FILTER_PTR_STRING fields.
- tracing/probes: Clean up argument parsing and BTF helper logic
. Make the $ prefix mandatory for comm access: Require the $ prefix for
special fetcharg variables like $comm and $COMM, preventing naming
conflicts with regular BTF-based event fields.
. Fix double addition of offset for @+FOFFSET: Clear the temporary offset
variable after setting the FETCH_OP_FOFFS instruction to avoid applying
the offset multiple times.
. Remove WARN_ON_ONCE from parse_btf_arg: Prevent triggering a kernel warning
via user-space input when creating a kprobe event on a raw address.
. Fix typo in a log message: Correct a spelling error ("$-valiable") in
trace probe log messages.
- samples/trace_events: Improve error checking
. Validate the thread pointer returned from kthread_run() in the trace
events sample code to properly handle thread creation failures.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmpD3BEbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8beGkIAMbMZ7zoCIlKEfZaRIHS
ms2BTUfh5mkyoIJ+dWXel9UmsvL2kj4FzKWt+gYKsYuxqu3o62BGIkaNffXJEKnc
qRvgVxsxOeJqXjmnSDjVhukBDGb8X1SaRd4DZMuEO77d2nYztYO61ejkF94S6WaQ
VE46pFu0FWGZvFGyyfrCEYFIkFF+4scsDB4ncHLR8u5tNqzg7NaUdvK+tc88/Exk
k7+qqo8aCwMjd8wkfsyCH6DvQmmN5sKcCEvOL8zzE6D4xfX9kRd0//FBZPDmGUC4
lQ2jNhMYhdLdOP+I7dIi+FBaY0Lye8mwHrnrqI2DSvYO4cb4LQvn2hexKLbN2dZE
dt8=
=3Y70
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
"fprobe fixes and spelling typos:
- Fix NULL pointer dereference in fprobe_fgraph_entry(). Prevent
general protection faults by checking shadow-stack reservation
bounds. Skip mid-flight registered fprobes that were not counted
during sizing.
eprobe: fix string pointer extraction
- Correct the casting of string pointers read from the ringbuffer to
prevent truncation of base event pointer variables when
dereferencing FILTER_PTR_STRING fields.
tracing/probes: clean up argument parsing and BTF helper logic
- Make the $ prefix mandatory for comm access: Require the $ prefix
for special fetcharg variables like $comm and $COMM, preventing
naming conflicts with regular BTF-based event fields.
- Fix double addition of offset for @+FOFFSET: Clear the temporary
offset variable after setting the FETCH_OP_FOFFS instruction to
avoid applying the offset multiple times.
- Remove WARN_ON_ONCE from parse_btf_arg: Prevent triggering a kernel
warning via user-space input when creating a kprobe event on a raw
address.
- Fix typo in a log message: Correct a spelling error ("$-valiable")
in trace probe log messages.
samples/trace_events: improve error checking
- Validate the thread pointer returned from kthread_run() in the
trace events sample code to properly handle thread creation
failures"
* tag 'probes-fixes-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Make the $ prefix mandatory for comm access
tracing/fprobe: Fix NULL pointer dereference in fprobe_fgraph_entry()
tracing/probes: Fix double addition of offset for @+FOFFSET
tracing: eprobe: read the complete FILTER_PTR_STRING pointer
tracing/events: Fix to check the simple_tsk_fn creation
tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg
tracing: probes: fix typo in a log message
ksmbd_close_fd_app_instance_id() looks up a prior durable handle by
AppInstanceId and closes it through opinfo->sess->file_table. This is
unsafe after the original session has been torn down. session_fd_check()
preserves reconnectable durable handles in the global table and clears
opinfo->conn/fp->conn, but opinfo->sess can still point to the freed
ksmbd_session.
Use opinfo->conn as the orphan sentinel, but make the check reliable by
serializing it with session_fd_check(). That path clears opinfo->conn
under fp->f_ci->m_lock, so hold the same lock while testing opinfo->conn
and while dereferencing opinfo->sess->file_table. Also avoid closing
through the session file table if the volatile id has already been
unpublished by session teardown.
Durable reconnect must keep the two fields consistent. Rebinding only
opinfo->conn leaves opinfo->sess pointing at the old freed session, so
a later app-instance supersede can pass the conn check and write-lock the
freed session's file table. Clear opinfo->sess when preserving a durable
handle during session teardown, and set it to the reconnecting session
when opinfo->conn is rebound in ksmbd_reopen_durable_fd().
Fixes: 16c3064970 ("ksmbd: handle durable v2 app instance id")
Reported-by: Gil Portnoy <dddhkts1@gmail.com>
Co-developed-by: Gil Portnoy <dddhkts1@gmail.com>
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb_grant_oplock() checks the previous oplock holder's o_fp to decide
whether a durable handle should be invalidated when the oplock break
cannot be delivered. prev_opinfo is obtained with opinfo_get_list(),
which pins only the oplock_info. It does not pin the ksmbd_file stored
in opinfo->o_fp.
A concurrent last close can unlink the opinfo from ci->m_op_list under
ci->m_lock and then free the ksmbd_file. The oplock_info can still be
kept alive by the refcount taken by opinfo_get_list(), but o_fp may
already point at freed memory by the time smb_grant_oplock() reads
is_durable, conn, or tcon.
Snapshot the previous holder's durable state while ci->m_lock is held,
then use only the copied values after dropping the lock. This keeps the
o_fp lifetime tied to the inode lock without taking an extra ksmbd_file
reference. Taking such a reference is unsafe here because smb_grant_oplock()
does not necessarily have the previous holder's session work, and dropping
the temporary reference can otherwise become the final putter.
Fixes: 26fa88dc87 ("ksmbd: invalidate durable handles on oplock break")
Reported-by: Gil Portnoy <dddhkts1@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd_close_disconnected_durable_delete_on_close() collects disconnected
durable handles for a name being superseded by a new delete-on-close
open, drops ci->m_lock, then closes each collected handle directly with
__ksmbd_close_fd().
That bypasses the FP_CLOSED and refcount handoff used by the other close
paths. If a durable reconnect or the durable scavenger already took a
reference to the same fp, the direct __ksmbd_close_fd() can free the
ksmbd_file while that other holder still owns a live reference.
Claim the disconnected durable handle before unlinking it from m_fp_list.
While holding ci->m_lock and global_ft.lock, only take ownership when the
durable lifetime reference is the only remaining reference. Then take a
transient reference, remove the fp from global_ft, mark it FP_CLOSED, and
move it to the local dispose list. If another holder already has a
reference, leave the fp linked and let that holder complete its path.
The dispose loop then drops both references owned by the claim. This keeps
the force-close path in the same refcount handoff model as the durable
scavenger and avoids leaving a live reconnected fp detached from
m_fp_list.
Fixes: 166e4c0702 ("ksmbd: supersede disconnected delete-on-close durable handle")
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Co-developed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Two concurrent SMB2 durable reconnects (DH2C/DHnC) on the same
persistent_id race the fp->owner.name compare-read in
ksmbd_vfs_compare_durable_owner() against the kfree() in
ksmbd_reopen_durable_fd()'s reopen-success path. fp->owner.name is a
standalone kstrdup() buffer whose lifetime is independent of the fp
refcount, and the two sites share no lock: the compare reads the buffer
while the reopen frees it, so the strcmp() can dereference freed memory.
Commit 7ce4fc4001 ("ksmbd: fix durable reconnect double-bind race in
ksmbd_reopen_durable_fd") made the fp->conn claim atomic under
global_ft.lock (closing the owner.name double-free and the ksmbd_file
write-UAF), but the compare-read versus reopen-free pair was left
unserialized.
BUG: KASAN: slab-use-after-free in strcmp+0x2c/0x80
Read of size 1 by task kworker
strcmp
ksmbd_vfs_compare_durable_owner
smb2_check_durable_oplock
smb2_open
Freed by task kworker:
kfree
ksmbd_reopen_durable_fd
smb2_open
Allocated by task kworker:
kstrdup
session_fd_check
smb2_session_logoff
The buggy address belongs to the cache kmalloc-8
Serialize both sides of the race with fp->f_lock. The global durable
file-table lock still protects the durable reconnect claim, but
fp->owner.name is per-open state and does not need to block unrelated
durable table lookups or reconnects. The teardown is left at its
existing location after the reopen-success point so that an __open_id()
rollback still retains owner.name for a later legitimate reconnect to
verify.
Fixes: 49110a8ce6 ("ksmbd: validate owner of durable handle on reconnect")
Assisted-by: Henry (Claude):claude-opus-4
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Co-developed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a cifs.ko client caches a read-handle (RH) lease via deferred close
and a conflicting open arrives, ksmbd breaks the lease and waits for the
acknowledgment in wait_for_break_ack() for up to OPLOCK_WAIT_TIME (35s).
__smb_break_all_levII_oplock() runs that wait while holding ci->m_lock
for read.
cifs.ko reacts to a handle-lease break by closing the deferred handle
rather than sending a lease break acknowledgment. That close path
(close_id_del_oplock() -> opinfo_del()) takes ci->m_lock for write and
is exactly what would wake the waiter, but it blocks on the read lock
held by the waiting thread. The break is then resolved only by the 35s
timeout, so xfstests generic/001 takes ~78s with leases enabled versus
~4s with oplocks only.
Collect the target opinfos (each pinned with a reference) while holding
ci->m_lock, then break them after releasing it, matching how
smb_grant_oplock() already breaks a conflicting lease using only a
reference. The reference keeps the opinfo (and its conn and lease)
alive across the unlocked window, and a close racing the break is
handled by the existing OPLOCK_CLOSING state check. Apply the same fix
to the parent lease break paths.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Update ksmbd.rst to reflect the current implementation status of SMB
features. Durable handles (v1, v2) and SMB3.1.1 Compression are now
fully supported in ksmbd, so update their status from "Planned for future"
to "Supported".
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
session_fd_check() and ksmbd_reopen_durable_fd() walk ci->m_op_list with
list_for_each_entry_rcu() while holding ci->m_lock for write. That is
the local inode/oplock serializer, but the RCU-list iterator does not
currently tell lockdep about it.
Pass lockdep_is_held(&ci->m_lock) to these iterators so
CONFIG_PROVE_RCU_LIST can see the rwsem protection already in place.
This was found by our static analysis tool and then manually reviewed
against the current tree. The dynamic triage evidence is a
target-matched CONFIG_PROVE_RCU_LIST warning; the change is limited
to documenting the existing protection contract.
This is a lockdep annotation cleanup. It does not change oplock list
lifetime or durable-handle behavior.
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb2_validate_credit_charge() adds the request's CreditCharge to
conn->outstanding_credits when an SMB2 PDU is received, and
smb2_set_rsp_credits() subtracts it again when the response is built.
However smb2_set_rsp_credits() only runs on the normal response path:
- __process_request() returning SERVER_HANDLER_ABORT (unimplemented
command, command index out of range, signature check failure, or a
handler that sets send_no_response such as a cancelled blocking
lock) breaks out of the processing loop before set_rsp_credits() is
called;
- smb2_set_rsp_credits() itself returns early with -EINVAL (total
credit overflow or insufficient credits) before the subtraction.
On all of these paths the charge added at receive time is never
returned, so conn->outstanding_credits only grows. Because a client can
repeatedly trigger them (e.g. by sending unimplemented commands or by
issuing and cancelling blocking locks), outstanding_credits eventually
reaches total_credits and smb2_validate_credit_charge() then rejects
every subsequent request, wedging the connection.
Record the charge that was added in work->credit_charge and release any
charge still pending at the single send. exit point of
__handle_ksmbd_work(), which all abort and error paths fall through to.
smb2_set_rsp_credits() clears work->credit_charge once it has returned
the charge so the response path is unchanged and the credit is never
released twice. Paths that never charged a credit (no multi-credit
support, validation failure) leave work->credit_charge at zero and are
unaffected.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb2_validate_credit_charge() computes the credit charge a request is
allowed to consume from the payload size:
CreditCharge = (max(SendPayloadSize, ResponsePayloadSize) - 1)/65536 + 1
For SMB2 QUERY_INFO, the server must validate CreditCharge based on the
*maximum* of InputBufferLength and OutputBufferLength. ksmbd instead
summed the two lengths, which overestimates the required charge.
As a result a single-credit QUERY_INFO whose InputBufferLength and
OutputBufferLength each fit in 64KB but whose sum exceeds 64KB is
rejected with STATUS_INVALID_PARAMETER, even though it is a valid
request. IOCTL already uses max() of the request and response sizes;
make QUERY_INFO consistent by feeding InputBufferLength as the request
length and OutputBufferLength as the expected response length so that
smb2_validate_credit_charge() takes their maximum.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb2_read() allocates the read payload buffer with kvzalloc(), zeroing up
to max_read_size bytes (1MB or more with multichannel) on every read,
only to immediately overwrite the region with file data via kernel_read().
The zero-fill is pure overhead: ksmbd_vfs_read() returns the number of
bytes actually read ('nbytes'), and only those nbytes are ever consumed -
they are pinned into the response iov (ksmbd_iov_pin_rsp_read()), sent
over the RDMA channel (smb2_read_rdma_channel()), or copied by the
compression path (ksmbd_compress_response() uses iov_len == nbytes). The
ALIGN(length, 8) tail padding and any short-read remainder are never read
or transmitted, so they need not be initialized.
Use kvmalloc() instead to skip the redundant zeroing. This reduces CPU
and memory-bandwidth usage on large sequential reads.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
set_ntacl_dacl() copies each ACE from the attacker-controlled stored
security descriptor verbatim into the response DACL without checking
sid.num_subauth. The ACE bytes (including an unchecked num_subauth)
originate from an authenticated SMB2_SET_INFO(SecInfo=DACL) that is
stored raw via ksmbd_vfs_set_sd_xattr(); parse_dacl() rejects a bad ACE
with `break` rather than an error, so parse_sec_desc() still returns
success and the malformed SD reaches the xattr intact.
On a subsequent SMB2_QUERY_INFO(SecInfo=DACL) for an inode carrying a
POSIX access ACL, build_sec_desc() -> set_ntacl_dacl() ->
set_posix_acl_entries_dacl() walks the copied ACEs and reads
ntace->sid.sub_auth[ntace->sid.num_subauth - 1]
with num_subauth taken straight from the stored SD. Since sub_auth[]
is fixed at SID_MAX_SUB_AUTHORITIES (15), a crafted num_subauth (e.g.
255) drives an out-of-bounds heap read of ~1 KB with an offset fully
controlled by an authenticated client.
The sibling functions already gate this field:
parse_dacl() -- num_subauth == 0 || > SID_MAX_SUB_AUTHORITIES
parse_sid() -- num_subauth > SID_MAX_SUB_AUTHORITIES
smb_copy_sid() -- min_t(u8, num_subauth, SID_MAX_SUB_AUTHORITIES)
set_ntacl_dacl() is the lone inconsistent path that omits the check.
Add the same num_subauth validation in set_ntacl_dacl() before copying
the ACE, matching the gate already enforced by parse_dacl().
Signed-off-by: Haofeng Li <lihaofeng@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Suggested-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
parse_dacl() limits the attacker-controlled ACE count by comparing it
with the number of minimal ACEs that fit in the DACL size. The DACL size
field is 16 bits, but the expression subtracts sizeof(struct smb_acl).
Because sizeof() is unsigned, a DACL size smaller than the ACL header
underflows to a large size_t.
A malicious client can reach this with:
SMB2_SET_INFO (InfoType=SMB2_O_INFO_SECURITY)
-> smb2_set_info_sec()
-> set_info_sec()
-> parse_sec_desc()
-> parse_dacl()
-> init_acl_state(..., 0xffff)
-> init_acl_state(..., 0xffff)
-> kmalloc_objs(..., 0xffff)
Thus a malformed security descriptor can make num_aces pass the guard
and drive large temporary ACL state and pointer-array allocations.
Reject DACLs smaller than struct smb_acl before doing the subtraction,
so the ACE count check cannot be bypassed by the underflow.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Haofeng Li <lihaofeng@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Free ndr buffer data when ndr_encode_dos_attr() returns error
to avoid memory leak.
Signed-off-by: Qiang Liu <liuqiang@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
1. When ndr_decode_v4_ntacl() fails, the code jumped to free_n_data
which only freed n.data, skipping kfree(acl.sd_buf) and leaking
the buffer. Zero-initialize struct xattr_ntacl acl, reorder error
labels to out_free to release acl.sd_buf on all error paths.
2. if (acl.sd_size < sizeof(struct smb_ntsd)) is true, original code
returned success without freeing sd_buf and left stale *pntsd.
Set rc = -EINVAL before jumping to out_free to return error code and
free buffer.
Signed-off-by: Qiang Liu <liuqiang@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ndr_encode_v4_ntacl() allocates sd_ndr.data via kzalloc() at entry.
If any subsequent ndr_write_*() call returns error during encoding,
the allocated sd_ndr.data won't be freed and causes memory leak.
Move kfree(sd_ndr.data) into out label to ensure the buffer gets
released on all success and error return paths.
Signed-off-by: Qiang Liu <liuqiang@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
tcf_bpf_act() can run from the tc egress path, which holds only
rcu_read_lock_bh(), but reads prog->filter with rcu_dereference() and
trips lockdep:
WARNING: suspicious RCU usage
net/sched/act_bpf.c:47 suspicious rcu_dereference_check() usage!
1 lock held by syz.2.1588/12756:
#0: (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit net/core/dev.c:4792
tcf_bpf_act+0x6ae/0x940 net/sched/act_bpf.c:47
tcf_classify+0x6e4/0x1080 net/sched/cls_api.c:1860
sch_handle_egress net/core/dev.c:4545 [inline]
__dev_queue_xmit+0x2185/0x2c00 net/core/dev.c:4808
packet_sendmsg+0x3dfa/0x5120 net/packet/af_packet.c:3114
The other tc actions and cls_bpf already use rcu_dereference_bh() here.
Do the same.
Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://patch.msgid.link/20260629154112.1164986-1-rhkrqnwk98@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Kconfig entry for the al3320a is missing a `select REGMAP_I2C`,
causing build failures.
Fixes: 1850e6ae7f ("iio: light: al3320a: Implement regmap support")
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The KConfig entry for the AL3010 is missing a `select REGMAP_I2C`,
causing build failures.
Fixes: 0e5e21e23d ("iio: light: al3010: Implement regmap support")
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The KConfig entry for the al3000a is missing a `select REGMAP_I2C`,
causing build failures.
Fixes: d531b9f789 ("iio: light: Add support for AL3000a illuminance sensor")
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reading a word from the stack in a kretprobe crashes a risc-v kernel.
$ cd /sys/kernel/tracing/
$ echo 'r n_tty_write $stack0' > dynamic_events
$ echo 1 > events/kprobes/enable
Unable to handle kernel paging request at virtual address 0000000200000128
...
[<ffffffff80016d16>] regs_get_kernel_stack_nth+0x26/0x38
[<ffffffff80177196>] process_fetch_insn+0x3ee/0x760
[<ffffffff80177836>] kretprobe_trace_func+0x116/0x1f0
[<ffffffff8017795a>] kretprobe_dispatcher+0x4a/0x58
[<ffffffff8013572e>] kretprobe_rethook_handler+0x5e/0x90
[<ffffffff80180838>] rethook_trampoline_handler+0x70/0x108
[<ffffffff8001ba32>] arch_rethook_trampoline_callback+0x12/0x1c
[<ffffffff8001ba84>] arch_rethook_trampoline+0x48/0x94
[<ffffffff8067872a>] tty_write+0x1a/0x30
In regs_get_kernel_stack_nth, regs->sp contains an arbitrary value.
arch_rethook_trampoline saves the registers from the probed function in a
struct pt_regs. sp is not saved. Instead, sp is decremented for
arch_rethook_trampoline's local stack.
Fix this crash and save the original sp along with the other registers.
Use a0 as a temporary register, it is overwritten anyway.
Cc: stable@vger.kernel.org
Fixes: c22b0bcb1d ("riscv: Add kprobes supported")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260630194010.1824039-1-martin@kaiser.cx
[pjw@kernel.org: added Fixes tag; cc'ed stable]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
query_nic_features() detects which offloads depend on tx-gso-partial
by enabling everything, turning tx-gso-partial off, and seeing which
active features drop out. Enabling all hw features is dangerous:
we may end up enabling rx-fcs and loopback for example. For the
ice driver we end up getting into problems with feature dependencies
so the cleanup isn't successful either, and the test exits with
rx-fcs and loopback enabled.
Scope the feature probing just to segmentation bits.
Fixes: 266b835e5e ("selftests: drv-net: tso: enable test cases based on hw_features")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260629233923.2151144-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Depending on the value of chip_version, the correct decode set is selected.
However, the subsequent matching with the t4 encoding type in the if-else
block results in a reassignment, which leads to the loss of support for
t6_decode as well as reinitializing of values t4_decode and t5_decode.
The component history shows that the if-else block previously used for
this purpose, as well as the execution order, was not affected by the
change.
Furthermore, it is suggested by the execution order that the scenario with
overwriting and loss of support will be implemented.
Delete the if-else block.
Fixes: 6df397539c ("cxgb4: Update correct encoding of SGE Ingress DMA States for T6 adapter")
Signed-off-by: Gleb Markov <markov.gi@npc-ksb.ru>
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20260629130856.1168-1-markov.gi@npc-ksb.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When busy-poll is active, napi_schedule_prep() returns false in
virtqueue_napi_schedule(), so virtqueue_disable_cb() is skipped.
The device may keep firing irqs until reaches virtqueue_napi_complete().
Under load (received == budget), it will lead to a large number
of spurious interrupts.
Fix it by disabling the callback at the virtnet_poll() entry.
This keeps the callback off while we poll and it is re-enabled by
virtqueue_napi_complete() when going idle.
Fixes: ceef438d61 ("virtio_net: remove custom busy_poll")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Longjun Tang <tanglongjun@kylinos.cn>
Link: https://patch.msgid.link/20260629024230.37325-1-lange_tang@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_free_addr_wq() previously removed addr_wq_timer using timer_delete()
while holding addr_wq_lock. However, timer_delete() does not guarantee that
a currently running timer handler has completed.
This allows a race with sctp_addr_wq_timeout_handler(), where the handler
may still run after addr_waitq has been freed, acquire addr_wq_lock, and
access freed memory, leading to a use-after-free.
Fix this by calling timer_shutdown_sync() before taking addr_wq_lock. This
guarantees that any in-flight timer handler has finished and prevents the
timer from being re-armed during teardown, making subsequent cleanup safe.
Fixes: 4db67e8086 ("sctp: Make the address lists per network namespace")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/5dc95f295bdb5c3f60e880dd9aa5112dc5c071cc.1782757874.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We always used 5 sec as the default command timeout. But soon after
it was introduced, David effectively made us ignore the timeout
(it was passed to process.communicate() as the wrong argument).
Gal recently fixed that, but turns out the 5 sec is not enough
for a lot of tests and setups. The fix caused regressions.
In particular running reconfig commands (e.g. XDP attach) on mlx5
with 32 rings and 9k MTU, on a heavily-debug-enabled kernel takes
more than 5 sec. The XDP installation command will time out after
5 sec but since the sleeps in the kernel are non interruptible
the command finishes anyway, leaving the XDP program attached,
but with non-zero exit code. defer()ed cleanups are not installed,
breaking the environment for subsequent tests.
Since "install XDP" is a pretty normal command a "point fix"
does not seem appropriate. 32 rings is a fairly reasonable
config, too, so we should just increase the timeout to 20 sec.
There's no real reason behind the value of 20.
Fixes: 1cf2704242 ("net: selftest: add test for netdev netlink queue-get API")
Fixes: f0bd193166 ("selftests: net: fix timeout passed as positional argument to communicate()")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260629233348.2145841-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xbc_snprint_cmdline() is meant to be called twice: first with
buf=NULL, size=0 to probe the rendered length, then with a real
buffer to fill it (the standard snprintf() two-pass pattern). The
probe call makes the function compute "buf + size" (NULL + 0) and,
on every iteration, advance "buf += ret" from that NULL base and
pass the result back into snprintf().
Pointer arithmetic on a NULL pointer is undefined behavior. It is
harmless in the in-kernel callers today, but the follow-up patches
run this same code in the userspace tools/bootconfig parser at kernel
build time, where host UBSan / FORTIFY_SOURCE abort the build.
Track a running written length (size_t) instead of mutating @buf, and
only form "buf + len" when @buf is non-NULL. snprintf(NULL, 0, ...)
is itself well defined and returns the would-be length, so the
two-pass "probe then fill" usage returns identical byte counts.
Link: https://lore.kernel.org/all/20260626-bootconfig_using_tools-v7-1-24ab72139c29@debian.org/
Fixes: 51887d03ac ("bootconfig: init: Allow admin to use bootconfig for kernel command line")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link to the uuid library as part of libvfio.mk instead of as only linking
it via VFIO selftests' Makefile, as the whole point of providing libvfio.mk
is to allow linking the VFIO library functionality into KVM selftests,
without KVM selftests having to know the gory details or duplicate code.
Cc: Raghavendra Rao Ananta <rananta@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: Vipin Sharma <vipinsh@google.com>
Cc: Alex Williamson <alex@shazbot.org>
Fixes: e65f1bf8a2 ("vfio: selftests: Extend container/iommufd setup for passing vf_token")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20260630212805.474418-1-seanjc@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Multiple readers access audit_queue.qlen via skb_queue_len() without
holding the queue lock or using READ_ONCE(), while kauditd writes to
this field via the skb_dequeue() → __skb_unlink() path with WRITE_ONCE()
protected by a spinlock. This constitutes data races.
All affected skb_queue_len(&audit_queue) call sites:
- kauditd_thread() wait_event_freezable() condition
- audit_receive_msg() AUDIT_GET handler (s.backlog assignment)
- audit_receive() backlog check
- audit_log_start() backlog check and pr_warn()
KCSAN reports the following conflicting access pattern (one example):
==================================================================
BUG: KCSAN: data-race in audit_log_start / skb_dequeue
write (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57:
skb_dequeue+0x70/0xf0
kauditd_send_queue+0x71/0x220
kauditd_thread+0x1cb/0x430
kthread+0x1c2/0x210
ret_from_fork+0x162/0x1a0
ret_from_fork_asm+0x1a/0x30
read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1:
audit_log_start+0x2a0/0x6b0
audit_core_dumps+0x64/0xa0
do_coredump+0x14b/0x1260
get_signal+0xeb2/0xf70
arch_do_signal_or_restart+0x41/0x170
exit_to_user_mode_loop+0xa2/0x1c0
do_syscall_64+0x1a3/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0xe0
value changed: 0x00000001 -> 0x00000000
==================================================================
Resolve the race by switching to lockless helper skb_queue_len_lockless(),
which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE()
write accesses already present on the writer side.
Cc: stable@vger.kernel.org
Fixes: 3197542482 ("audit: rework audit_log_start()")
Signed-off-by: Chi Wang <wangchi@kylinos.cn>
Reviewed-by: Ricardo Robaina <rrobaina@redhat.com>
[PM: line length tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
wait_event_interruptible_timeout() can return a negative error code when
interrupted by a signal. The original code treated all non-zero return
values as success, which would incorrectly synchronize DMA channels and
return 0 instead of propagating the interruption error.
Fixes: fa08b56686 ("spi: rzv2h-rspi: add support for DMA mode")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Tested-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260627-rspi-v1-1-170c93ee14da@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Alienware m15 R7 AMD exposes an ACP6x DMIC path, but its DMI
product name is not present in the Yellow Carp ACP quirk table. As a
result, the ACP machine driver does not enable the DMIC card on this
system.
Add the DMI product name for this machine. With this quirk applied, the
kernel reports:
acp_yc_mach acp_yc_mach.0: Enabling ACP DMIC support via DMI
and ALSA exposes the ACP DMIC capture device:
card 3: acp6x
device 0: DMIC capture dmic-hifi-0
Tested on an Alienware m15 R7 AMD with product SKU 0B59.
Link: https://jethachan.net/dev/2026/03/21/fixing-internal-microphone-alienware-linux.html
Assisted-by: OpenAI-Codex:gpt-5.5
Signed-off-by: Jetha Chan <jethachan@gmail.com>
Link: https://patch.msgid.link/20260630003328.15675-1-jethachan@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This SPI controller likely belongs to a power domain for all the SoCs
listed. For sure, it belongs to one on the Renesas RZ/N1 SoC, so
enable the property to be able to describe its power domain in DTs.
Suggested-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260626180326.9593-3-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 164c05f03f ("spi: Convert DW SPI binding to DT schema") added
an RZ/N1 entry which was not in the original txt-file. It doesn't follow
the usual "<soc entry>, <soc family entry>" style for Renesas SoCs which
was properly added later with commit 029d32a892 ("spi: dw-apb-ssi:
Integrate Renesas RZ/N1 SPI controller"). In that commit, removing the
bogus entry was overlooked and is finally done now.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260626180326.9593-2-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver installs a chained handler for the parent interrupt during probe
using irq_set_chained_handler_and_data(), but the remove function does not
clear this handler. This leaves a dangling handler that may be called when
the parent interrupt fires after the driver has been removed, potentially
accessing freed memory and causing a kernel crash.
Additionally, the parent_irq obtained via irq_of_parse_and_map() is not
stored, making it inaccessible in the remove function. Moreover, interrupt
mappings created during probe are not properly disposed.
Fix this by:
- Saving parent_irq in probe
- Clearing the chained handler with NULL in ts4800_ic_remove()
- Disposing all IRQ mappings before domain removal to prevent resource
leaks
Fixes: d01f8633d5 ("irqchip/ts4800: Add TS-4800 interrupt controller")
Signed-off-by: Qingshuang Fu <fuqingshuang@kylinos.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260623015211.109382-1-fffsqian@163.com
of_get_cpu_node() returns a referenced device node. In
its_cpu_init_collection(), the Cavium 23144 workaround only uses the
node to compare the CPU NUMA node, but the reference is never dropped.
Use the device_node cleanup helper for the CPU node reference so it is
released when leaving the workaround block, including the NUMA mismatch
return path.
Fixes: fbf8f40e16 ("irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Acked-by: Marc Zyngier <maz@kernel.org>
imsic_early_acpi_init() allocates a firmware node before setting up the
IMSIC state. If imsic_setup_state() fails, the function returns without
freeing the allocated fwnode.
Free the fwnode and clear the global pointer on this error path, matching
the cleanup already done when imsic_early_probe() fails.
[ tglx: Use a common cleanup path instead of copying code around ]
Fixes: fbe826b1c1 ("irqchip/riscv-imsic: Add ACPI support")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260623073744.2009137-1-haoxiang_li2024@163.com
Since $comm or $COMM are not event field but special fetcharg
variables to access current->comm, It should not be accessed
without '$' prefix even with typecast.
Link: https://lore.kernel.org/all/178231209724.732967.12049805699091810641.stgit@devnote2/
Fixes: 69efd863a7 ("tracing/eprobes: Allow use of BTF names to dereference pointers")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
fprobe_fgraph_entry() sizes a shadow-stack reservation in one walk of
the per-ip fprobe list and fills it in a second walk, both under
rcu_read_lock() only. A fprobe registered on an already-live ip can
become visible between the two walks, so the fill walk processes an
exit_handler the sizing walk did not count and used runs past
reserved_words. If the sizing walk counted nothing, fgraph_data is NULL
and the first write_fprobe_header() faults:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:fprobe_fgraph_entry+0xa38/0xf10 kernel/trace/fprobe.c:167
Call Trace:
<TASK>
function_graph_enter_regs+0x44c/0xa10 kernel/trace/fgraph.c:677
ftrace_graph_func+0xc5/0x140 arch/x86/kernel/ftrace.c:671
__kernel_text_address+0x9/0x40 kernel/extable.c:78
arch_stack_walk+0x117/0x170 arch/x86/kernel/stacktrace.c:26
kmem_cache_free+0x188/0x580 mm/slub.c:6378
tcp_data_queue+0x18d/0x6550 net/ipv4/tcp_input.c:5590
[...]
</TASK>
The list cannot be frozen across the two walks, so skip a node that does
not fit the reservation and count it as missed.
Link: https://lore.kernel.org/all/20260619184425.3824774-1-rhkrqnwk98@gmail.com/
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Since commit 533059281e ("tracing: probeevent: Introduce new argument
fetching code") wrongly use @offset local variable during the parsing,
the offset value is added twice when dereferencing.
Reset the @offset after setting it in FETCH_OP_FOFFS.
Link: https://lore.kernel.org/all/178217905962.643090.1978577464942171332.stgit@devnote2/
Fixes: 533059281e ("tracing: probeevent: Introduce new argument fetching code")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
For a char * element in an event, the FILTER_PTR_STRING filter type is
used. When the event occurs, a pointer is stored in the ringbuffer.
If an eprobe references such a char * element of a "base event", the
stored pointer is truncated when it's read from the ringbuffer.
$ cd /sys/kernel/tracing
$ echo 'e rcu.rcu_utilization $s:x64 $s:string' > dynamic_events
$ echo 1 > tracing_on
$ echo 1 > events/eprobes/enable
$ sleep 1
$ echo 0 > events/eprobes/enable
$ cat trace
<idle>-0 ...: (rcu.rcu_utilization) arg1=0x4f arg2=(fault)
<idle>-0 ...: (rcu.rcu_utilization) arg1=0x2 arg2=(fault)
The problem is in get_event_field
val = (unsigned long)(*(char *)addr);
addr points to the position in the ringbuffer where the pointer was
stored. The assignment reads only the lowest byte of the pointer.
Fix the cast to read the whole pointer. The output of the test above
is now
<idle>-0 ... arg1=0xffffffff81c7d3f3 arg2="Start scheduler-tick"
<idle>-0 ... arg1=0xffffffff81c57340 arg2="End scheduler-tick"
Link: https://lore.kernel.org/all/20260620145339.3234726-1-martin@kaiser.cx/
Fixes: f04dec9346 ("tracing/eprobes: Fix reading of string fields")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
GPIO interrupts that are wakeup capable need to be forwarded to wakeup
capable parent irqchip. This is done via writing to it's wakeup_enable bit.
Currently the bit is set only for PDC irqchip by checking skip_wake_irqs.
skip_wake_irqs is set to differentiate between parent irqchips MPM and
PDC. It is set when the parent irqchip is PDC to inform pinctrl about
skipping the IRQ setting up at TLMM.
However, the functionality to forward GPIO interrupts during SoC low
power mode is needed regardless of which parent irqchip it is.
Without the functionality it is impossible for MPM irqchip to detect the
GPIO interrupt during SoC low power mode since for MPM irqchip the
skip_wake_irqs is always false.
Remove skip_wake_irqs condition when setting wakeup enable bit to allow
forwarding GPIO interrupts for SoCs using MPM irqchip too.
Fixes: 76b446f5b8 ("pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits")
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Reviewed-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260616-enable_wakeup_capable_gpios-v3-1-fb59647d89cb@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Function 'mediatek_gpio_bank_probe()' registers three GPIO chips using
'devm_gpiochip_add_data()'. At this point, the chips become live and visible
to consumers. However, the IRQ domain isn't allocated and set up until
'mt7621_gpio_irq_setup()' is called after the GPIO chips setup finishes.
If a consumer requests a GPIO IRQ concurrently 'mt7621_gpio_to_irq()' can
be called and pass a NULL irq domain pointer irq_create_mapping(), that can
corrupt the mappings or cause a crash. Fix this possible problem seting up
irq domain before GPIO chips setup is performed.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: a46f2e5720 ("gpio: mt7621: fix interrupt banks mapping on gpio chips")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20260626060112.2498324-4-sergio.paracuellos@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The driver uses devm_gpiochip_add_data() to register the GPIO chips which
means the devres subsystem will unregister them only after the function
'mt7621_gpio_remove()' returns. During the window between domain destruction
and devres unregistering the GPIO chips, the chips are still fully active.
If a consumer or userspace invokes gpiod_to_irq() during this window,
'mt7621_gpio_to_irq()' can dereference the already-freed irq domain pointer.
Thus, manage the IRQ domain teardown using 'devm_add_action_or_reset()' to
guarantee it is destroyed strictly after the GPIO chips are removed.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: a46f2e5720 ("gpio: mt7621: fix interrupt banks mapping on gpio chips")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20260626060112.2498324-3-sergio.paracuellos@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The bank-shared fields like 'rising' and 'falling' are modified using
non-atomic read-modify-write operations. Since every gpio chip instance
represents an entire bank of 32 pins, if 'mediatek_gpio_irq_type()' is
called concurrently for different IRQs on the same bank a possible overwrite
of each other's configuration is possible. Thus, protect this state with
'gpio_generic_lock_irqsave' lock in the same way it is handled in irp_chip
'mediatek_gpio_irq_mask()' and 'mediatek_gpio_irq_unmask()' callbacks.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 4ba9c3afda ("gpio: mt7621: Add a driver for MT7621")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20260626060112.2498324-2-sergio.paracuellos@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
