We found at least one situation where the safe pages list was empty and
get_buffer() would gladly try to use a NULL pointer.
Signed-off-by: Brian Geffon <bgeffon@google.com>
Fixes: 8357376d3d ("[PATCH] swsusp: Improve handling of highmem")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The vCPU-scoped feature bitmap was left in place a couple of releases
ago in case the change to VM-scoped vCPU features broke anyone. Nobody
has complained and the interop between VM and vCPU bitmaps is pretty
gross. Throw it out.
Link: https://lore.kernel.org/r/20230920195036.1169791-9-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
It would appear that userspace can select the NV feature flag regardless
of whether the system actually supports the feature. Obviously a nested
guest isn't getting far in this situation; let's reject the flag
instead.
Link: https://lore.kernel.org/r/20230920195036.1169791-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Test for feature support in the ioctl handler rather than
kvm_reset_vcpu(). Continue to uphold our all-or-nothing policy with
address and generic pointer authentication.
Link: https://lore.kernel.org/r/20230920195036.1169791-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
To date KVM has relied on kvm_reset_vcpu() failing when the vCPU feature
flags are unsupported by the system. This is a bit messy since
kvm_reset_vcpu() is called at runtime outside of the KVM_ARM_VCPU_INIT
ioctl when it is expected to succeed. Further complicating the matter is
that kvm_reset_vcpu() must tolerate be idemptotent to the config_lock,
as it isn't consistently called with the lock held.
Prepare to move feature compatibility checks out of kvm_reset_vcpu() with
a 'generic' check that compares the user-provided flags with a computed
maximum feature set for the system.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20230920195036.1169791-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
This adds support for an async version of waitid(2), in a fully async
version. If an event isn't immediately available, wait for a callback
to trigger a retry.
The format of the sqe is as follows:
sqe->len The 'which', the idtype being queried/waited for.
sqe->fd The 'pid' (or id) being waited for.
sqe->file_index The 'options' being set.
sqe->addr2 A pointer to siginfo_t, if any, being filled in.
buf_index, add3, and waitid_flags are reserved/unused for now.
waitid_flags will be used for options for this request type. One
interesting use case may be to add multi-shot support, so that the
request stays armed and posts a notification every time a monitored
process state change occurs.
Note that this does not support rusage, on Arnd's recommendation.
See the waitid(2) man page for details on the arguments.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move struct wait_opts and waitid_info into kernel/exit.h, and include
function declarations for the recently added helpers. Make them
non-static as well.
This is in preparation for adding a waitid operation through io_uring.
With the abtracted helpers, this is now possible.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the setup logic out of kernel_waitid(), and into a separate helper.
No functional changes intended in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than have a maze of gotos, put the actual logic in __do_wait()
and have do_wait() loop deal with waitqueue setup/teardown and whether
to call __do_wait() again.
No functional changes intended in this patch.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Abstract out the helper that decides if we should wake up following
a wake_up() callback on our internal waitqueue.
No functional changes intended in this patch.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This behaves like IORING_OP_READ, except:
1) It only supports pollable files (eg pipes, sockets, etc). Note that
for sockets, you probably want to use recv/recvmsg with multishot
instead.
2) It supports multishot mode, meaning it will repeatedly trigger a
read and fill a buffer when data is available. This allows similar
use to recv/recvmsg but on non-sockets, where a single request will
repeatedly post a CQE whenever data is read from it.
3) Because of #2, it must be used with provided buffers. This is
uniformly true across any request type that supports multishot and
transfers data, with the reason being that it's obviously not
possible to pass in a single buffer for the data, as multiple reads
may very well trigger before an application has a chance to process
previous CQEs and the data passed from them.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is cleaner than gating on the opcode type, particularly as more
read/write type opcodes may be added.
Then we can use that for the data import, and for __io_read() on
whether or not we need to copy state.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add __io_read() which does the grunt of the work, leaving the completion
side to the new io_read(). No functional changes in this patch.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.
I have attempted to put this in the right place at unbind time. In
most other DRM drivers the call is made right after the call to
drm_kms_helper_poll_fini(), so I've put it there. That means that this
call will also be made in the case that we hit errors in bind, since
kirin_drm_kms_cleanup() is called both in the bind error path and in
unbind. I believe this is harmless even though it's not needed in the
bind error path.
For handling shutdown, we rely on the common technique of seeing if
the drvdata is NULL to know whether we need to call
drm_atomic_helper_shutdown(). This makes it important to make sure
that the drvdata is NULL if bind failed or if unbind was called. We
don't need the actual check for NULL and we'll rely on the patch
("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a
noop").
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.6.I21e0916bbd276033f7d31979c0da171458dedd4d@changeid
Based on grepping through the source code these drivers appear to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver remove (or unbind) time. Among other things, this means
that if a panel is in use that it won't be cleanly powered off at
system shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.
A few notes about these fixes:
- I confirmed that these drivers were all DRIVER_MODESET type drivers,
which I believe makes this relevant.
- I confirmed that these drivers were all DRIVER_ATOMIC.
- When adding drm_atomic_helper_shutdown() to the remove/unbind path,
I added it after drm_kms_helper_poll_fini() when the driver had
it. This seemed to be what other drivers did. If
drm_kms_helper_poll_fini() wasn't there I added it straight after
drm_dev_unregister().
- This patch deals with drivers using the component model in similar
ways as the patch ("drm: Call drm_atomic_helper_shutdown() at
shutdown time for misc drivers")
- These fixes rely on the patch ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop") to simplify
shutdown.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # tilcdc
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.5.I771eb4bd03d8772b19e7dcfaef3e2c167bce5846@changeid
Based on grepping through the source code, this driver appears to be
missing a call to drm_atomic_helper_shutdown() at remove time. Let's
add it.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS driver remove comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.4.I4752a39ad9f8fd08b32c2b78a8a3e40491bfb5eb@changeid
Based on grepping through the source code these drivers appear to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.3.I10dbe099fb1059d304ba847d19fc45054f7ffe9f@changeid
Based on grepping through the source code these drivers appear to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.
All of the drivers in this patch were fairly straightforward to fix
since they already had a call to drm_atomic_helper_shutdown() at
remove/unbind time but were just lacking one at system shutdown. The
only hitch is that some of these drivers use the component model to
register/unregister their DRM devices. The shutdown callback is part
of the original device. The typical solution here, based on how other
DRM drivers do this, is to keep track of whether the device is bound
based on drvdata. In most cases the drvdata is the drm_device, so we
can just make sure it is NULL when the device is not bound. In some
drivers, this required minor code changes. To make things simpler,
drm_atomic_helper_shutdown() has been modified to consider a NULL
drm_device as a noop in the patch ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop").
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.2.I9115e5d094a43e687978b0699cc1fe9f2a3452ea@changeid
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.
This driver was fairly easy to update. The drm_device is stored in the
drvdata so we just have to make sure the drvdata is NULL whenever the
device is not bound. To make things simpler,
drm_atomic_helper_shutdown() has been modified to consider a NULL
drm_device as a noop in the patch ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop").
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901164111.RFT.1.I3d5598bd73a59b5ded71430736c93f67dc5dea61@changeid
Finish off the 'simple' futex2 syscall group by adding
sys_futex_requeue(). Unlike sys_futex_{wait,wake}() its arguments are
too numerous to fit into a regular syscall. As such, use struct
futex_waitv to pass the 'source' and 'destination' futexes to the
syscall.
This syscall implements what was previously known as FUTEX_CMP_REQUEUE
and uses {val, uaddr, flags} for source and {uaddr, flags} for
destination.
This design explicitly allows requeueing between different types of
futex by having a different flags word per uaddr.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230921105248.511860556@noisy.programming.kicks-ass.net
In order to support mixed size requeue, add a second flags argument to
the internal futex_requeue() function.
No functional change intended.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230921105248.396780136@noisy.programming.kicks-ass.net
To complement sys_futex_waitv()/wake(), add sys_futex_wait(). This
syscall implements what was previously known as FUTEX_WAIT_BITSET
except it uses 'unsigned long' for the value and bitmask arguments,
takes timespec and clockid_t arguments for the absolute timeout and
uses FUTEX2 flags.
The 'unsigned long' allows FUTEX2_SIZE_U64 on 64bit platforms.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230921105248.164324363@noisy.programming.kicks-ass.net
The current semantics for futex_wake() are a bit loose, specifically
asking for 0 futexes to be woken actually gets you 1.
Adding a !nr check to sys_futex_wake() makes that it would return 0
for unaligned futex words, because that check comes in the shared
futex_wake() function. Adding the !nr check there, would affect the
legacy sys_futex() semantics.
Hence frob a flag :-(
Suggested-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230921105248.048643656@noisy.programming.kicks-ass.net
To complement sys_futex_waitv() add sys_futex_wake(). This syscall
implements what was previously known as FUTEX_WAKE_BITSET except it
uses 'unsigned long' for the bitmask and takes FUTEX2 flags.
The 'unsigned long' allows FUTEX2_SIZE_U64 on 64bit platforms.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230921105247.936205525@noisy.programming.kicks-ass.net
Ensure the futex value fits in the given futex size. Since this adds a
constraint to an existing syscall, it might possibly change behaviour.
Currently the value would be truncated to a u32 and any high bits
would get silently lost.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230921105247.828934099@noisy.programming.kicks-ass.net
Futex has 3 sets of flags:
- legacy futex op bits
- futex2 flags
- internal flags
Add a few helpers to convert from the API flags into the internal
flags.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20230921105247.722140574@noisy.programming.kicks-ass.net
Add the definition for the missing but always intended extra sizes,
and add a NUMA flag for the planned numa extention.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20230921105247.617057368@noisy.programming.kicks-ass.net
sys_futex_waitv() is part of the futex2 series (the first and only so
far) of syscalls and has a flags field per futex (as opposed to flags
being encoded in the futex op).
This new flags field has a new namespace, which unfortunately isn't
super explicit. Notably it currently takes FUTEX_32 and
FUTEX_PRIVATE_FLAG.
Introduce the FUTEX2 namespace to clarify this
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20230921105247.507327749@noisy.programming.kicks-ass.net
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZQsZLQAKCRCRxhvAZXjc
op0vAP96hkSUnmXmxTr8GHId3yfElN8ZZ3aSfePeBdljjKEZVAEA2+cbHLy4GqRi
TpjP1HNIdmtbVSC2ZnrgqkbwGageQgg=
=s92y
-----END PGP SIGNATURE-----
Merge tag 'v6.6-rc3.vfs.ctime.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull finegrained timestamp reverts from Christian Brauner:
"Earlier this week we sent a few minor fixes for the multi-grained
timestamp work in [1]. While we were polishing those up after Linus
realized that there might be a nicer way to fix them we received a
regression report in [2] that fine grained timestamps break gnulib
tests and thus possibly other tools.
The kernel will elide fine-grain timestamp updates when no one is
actively querying for them to avoid performance impacts. So a sequence
like write(f1) stat(f2) write(f2) stat(f2) write(f1) stat(f1) may
result in timestamp f1 to be older than the final f2 timestamp even
though f1 was last written too but the second write didn't update the
timestamp.
Such plotholes can lead to subtle bugs when programs compare
timestamps. For example, the nap() function in [2] will estimate that
it needs to wait one ns on a fine-grain timestamp enabled filesytem
between subsequent calls to observe a timestamp change. But in general
we don't update timestamps with more than one jiffie if we think that
no one is actively querying for fine-grain timestamps to avoid
performance impacts.
While discussing various fixes the decision was to go back to the
drawing board and ultimately to explore a solution that involves only
exposing such fine-grained timestamps to nfs internally and never to
userspace.
As there are multiple solutions discussed the honest thing to do here
is not to fix this up or disable it but to cleanly revert. The general
infrastructure will probably come back but there is no reason to keep
this code in mainline.
The general changes to timestamp handling are valid and a good cleanup
that will stay. The revert is fully bisectable"
Link: https://lore.kernel.org/all/20230918-hirte-neuzugang-4c2324e7bae3@brauner [1]
Link: https://lore.kernel.org/all/bf0524debb976627693e12ad23690094e4514303.camel@linuxfromscratch.org [2]
* tag 'v6.6-rc3.vfs.ctime.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Revert "fs: add infrastructure for multigrain timestamps"
Revert "btrfs: convert to multigrain timestamps"
Revert "ext4: switch to multigrain timestamps"
Revert "xfs: switch to multigrain timestamps"
Revert "tmpfs: add support for multigrain timestamps"
Jens reported a compiler warning when using
CONFIG_CC_OPTIMIZE_FOR_SIZE=y that looks like this
fs/btrfs/tree-log.c: In function ‘btrfs_log_prealloc_extents’:
fs/btrfs/tree-log.c:4828:23: warning: ‘start_slot’ may be used
uninitialized [-Wmaybe-uninitialized]
4828 | ret = copy_items(trans, inode, dst_path, path,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4829 | start_slot, ins_nr, 1, 0);
| ~~~~~~~~~~~~~~~~~~~~~~~~~
fs/btrfs/tree-log.c:4725:13: note: ‘start_slot’ was declared here
4725 | int start_slot;
| ^~~~~~~~~~
The compiler is incorrect, as we only use this code when ins_len > 0,
and when ins_len > 0 we have start_slot properly initialized. However
we generally find the -Wmaybe-uninitialized warnings valuable, so
initialize start_slot to get rid of the warning.
Reported-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jens reported a compiler error when using CONFIG_CC_OPTIMIZE_FOR_SIZE=y
that looks like this
In function ‘gather_device_info’,
inlined from ‘btrfs_create_chunk’ at fs/btrfs/volumes.c:5507:8:
fs/btrfs/volumes.c:5245:48: warning: ‘dev_offset’ may be used uninitialized [-Wmaybe-uninitialized]
5245 | devices_info[ndevs].dev_offset = dev_offset;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
fs/btrfs/volumes.c: In function ‘btrfs_create_chunk’:
fs/btrfs/volumes.c:5196:13: note: ‘dev_offset’ was declared here
5196 | u64 dev_offset;
This occurs because find_free_dev_extent is responsible for setting
dev_offset, however if we get an -ENOMEM at the top of the function
we'll return without setting the value.
This isn't actually a problem because we will see the -ENOMEM in
gather_device_info() and return and not use the uninitialized value,
however we also just don't want the compiler warning so rework the code
slightly in find_free_dev_extent() to make sure it's always setting
*start and *len to avoid the compiler warning.
Reported-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Merge series from cy_huang@richtek.com:
This patch series adds Richtek rtq9128 automotive audio amplifier
support. It can deliver up to 4x75W into 4Ohm speaker from a 25V
supply in automotive applications.
We can replace
p = strchrnul(str, '$OLD');
*p = '\0';
with
strreplace(str, '$OLD', '\0');
that does the compatible modification without a need of the temporary variable.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230918135116.1248560-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Replace open coded functionalify of kstrdup_and_replace() with a call.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230918135116.1248560-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-8-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-7-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-6-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-5-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-4-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-3-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-2-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
gpio_crystalcove pin 10 is already in input mode and passing GPIOD_IN
when requesting the GPIO changes its pull-up/-down settings causing
the 830F/L to get misdetected as 1050F/L.
Switch to using GPIOD_ASIS when requesting the GPIO to fix
the misdetection.
Fixes: 4014ae236b ("platform/x86: x86-android-tablets: Stop using gpiolib private APIs")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230915214933.62595-1-hdegoede@redhat.com
On Lenovo platforms there is a limitation in the number of times an
attribute can be saved. This is an architectural limitation and it limits
the number of attributes that can be modified to 48.
A solution for this is instead of the attribute being saved after every
modification allow a user to bulk set the attributes and then trigger a
final save. This allows unlimited attributes.
This patch introduces a save_settings attribute that can be configured to
either single or bulk mode by the user.
Single mode is the default but customers who want to avoid the 48
attribute limit can enable bulk mode.
Displaying the save_settings attribute will display the enabled mode.
When in bulk mode writing 'save' to the save_settings attribute will
trigger a save. Once this has been done a reboot is required before more
attributes can be modified.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230919141530.4805-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- A fix for breakpoint handling which was using get_user() while atomic.
- Fix the Power10 HASHCHK handler which was using get_user() while atomic.
- A few build fixes for issues caused by recent changes.
Thanks to: Benjamin Gray, Christophe Leroy, Kajol Jain, Naveen N Rao.
-----BEGIN PGP SIGNATURE-----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=piWL
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for breakpoint handling which was using get_user() while atomic
- Fix the Power10 HASHCHK handler which was using get_user() while
atomic
- A few build fixes for issues caused by recent changes
Thanks to Benjamin Gray, Christophe Leroy, Kajol Jain, and Naveen N Rao.
* tag 'powerpc-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/dexcr: Move HASHCHK trap handler
powerpc/82xx: Select FSL_SOC
powerpc: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION and FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
powerpc/watchpoints: Annotate atomic context in more places
powerpc/watchpoint: Disable pagefaults when getting user instruction
powerpc/watchpoints: Disable preemption in thread_change_pc()
powerpc/perf/hv-24x7: Update domain value check