To simplify with maintenance let's move the Arm SCMI power-domain driver
to the new pmdomain directory.
Link: https://lore.kernel.org/all/20230921113328.3208651-1-sudeep.holla@arm.com
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
To enable support for performance scaling (DVFS) for generic devices with
the SCMI performance protocol, let's add an SCMI performance domain. This
is being modelled as a genpd provider, with support for performance scaling
through genpd's ->set_performance_state() callback.
Note that, this adds the initial support that allows consumer drivers for
attached devices, to vote for a new performance state via calling the
dev_pm_genpd_set_performance_state(). However, this should be avoided as
it's in most cases preferred to use the OPP library to vote for a new OPP
instead. The support using the OPP library isn't part of this change, but
needs to be implemented from subsequent changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230919121605.7304-1-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
In some cases the OPP tables aren't specified in device tree, but rather
encoded in the FW. To allow a genpd provider to specify them dynamically
instead, let's add a new genpd flag, GENPD_FLAG_OPP_TABLE_FW.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-13-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The performance domain-id can be described in DT using the power-domains
property or the clock property. The latter is already supported, so let's
add support for the power-domains too.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-12-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZQv/2QAKCRCAXGG7T9hj
vlaAAQCsmQ0V9N9I4SW3G2JKGGIWW6+/IzsKF4RhNlSgm15MNgD9E0nHfEQpRGkL
6qKO7wc/C3PJRrcq8RxWS8jergeT+wY=
=vBS0
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.6a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- remove some unused functions in the Xen event channel handling
- fix a regression (introduced during the merge window) when booting as
Xen PV guest
- small cleanup removing another strncpy() instance
* tag 'for-linus-6.6a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/efi: refactor deprecated strncpy
x86/xen: allow nesting of same lazy mode
x86/xen: move paravirt lazy code
arm/xen: remove lazy mode related definitions
xen: simplify evtchn_do_upcall() call maze
The power-domains bindings has in many years been used to describe so
called performance-domains too. Rather than using a separate binding it has
been convenient to re-use the power-domain bindings, as in some cases it's
in fact a combination of the both that would be the best description.
Therefore, let's make it more clear that the power-domains bindings can be
used to describe a performance-domain too.
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230825112633.236607-11-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The protocol@13 node is describing the performance scaling option for the
ARM SCMI interface, as a clock provider. This is unnecessary limiting, as
performance scaling is in many cases not limited to switching a clock's
frequency.
Therefore, let's extend the binding so the interface can be modelled as a
generic performance domain too. The common way to describe this, is to use
the power-domain DT bindings, so let's use that.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230825112633.236607-10-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When an CPU's performance domain is managed through the SCMI firmware,
let's enable us describe this as a consumer of a power-domain provider,
which is the de-facto standard to use for performance domains. In this
case, let's specify a corresponding power-domain-name, to point out the
corresponding index for it.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230825112633.236607-9-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The domain-id for the cpu_dev has already been parsed at the point when
scmi_get_sharing_cpus() is getting called. Let's pass it as an in-parameter
to avoid the unnecessary OF parsing.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-7-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
There are no longer any users of the ->device_domain_id() ops in the
scmi_perf_proto_ops, therefore let's remove it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-6-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Most scmi_perf_proto_ops are already using an "u32 domain" as an
in-parameter to indicate what performance domain we shall operate upon.
However, some of the ops are using a "struct device *dev", which means that
an additional OF parsing is needed each time the perf ops gets called, to
find the corresponding domain-id.
To avoid the above, but also to make the code more consistent, let's
replace the in-parameter "struct device *dev" with an "u32 domain". Note
that, this requires us to make some corresponding changes to the scmi
cpufreq driver, so let's do that too.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-5-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The OF parsing of the clock domain specifier seems to better belong in the
scmi cpufreq driver, rather than being implemented behind the generic
->device_domain_id() perf protocol ops.
To prepare to remove the ->device_domain_id() ops, let's implement the OF
parsing in the scmi cpufreq driver instead.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-4-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Similar to other protocol ops, it's useful for an scmi module driver to get
some generic information of a performance domain. Therefore, let's add a
new callback to provide this information. The information is currently
limited to the name of the performance domain and whether the set-level
operation is supported, although this can easily be extended if we find the
need for it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-3-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Fix several compilation errors and warnings in memblock tests
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmUL2P0QHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kSniB/9crPnn5y/AvzqA/AiRAvK9pbYj8t3lZyRC
PFvqHqg6OOQA2AN7VHcxaty6nMYMnr6Myk8lxmY45tpW6wp16XcFtoGYZAllBwTm
GoqyhRnREDHp7Z0FtKFGcdXm4AYSzEFIlQymoLFJ5S/fGDiBxBd53pacqS0JrL6X
TKKG1wLPiW9Vq/G90dL6N8qgA4vel9/UoE0aKEWHSEiGhhgcEh+foBoOs0F8DR9y
o/GZFVJfW5Jek6D7kWzMMq37dPS4TVJWN8df2Q2Ljy5f64i9sT/3rm+/dV6bmarB
1gjQtI+YoTeu+bZ1I9zJBWwTsMjyjhyZEk1zZxys89+qOnwaCTHF
=bA+b
-----END PGP SIGNATURE-----
Merge tag 'fixes-2023-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock test fixes from Mike Rapoport:
"Fix several compilation errors and warnings in memblock tests"
* tag 'fixes-2023-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: fix warning ‘struct seq_file’ declared inside parameter list
memblock tests: fix warning: "__ALIGN_KERNEL" redefined
memblock tests: Fix compilation errors.
Introduce correspondent definitions for choosing between CD2X CDCLK
and PLL CDCLK as a source. All the entries in cdclk table for xe2lpd are
defined with PLL CDCLK as source, so simply set it. Also
skl_cdclk_decimal() shouldn't be set in CDCLK_CTL anymore, so skip it
for display version 20 and above.
v2:
- Remove unneeded comment and use REG_BIT() (Matt Roper)
- Rename CDCLK_SOURCE_SEL_CDCLK_PLL() to MDCLK_SOURCE_SEL_CDCLK_PLL
to match spec (Lucas)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-22-lucas.demarchi@intel.com
Xe2_LPD supports DC5, DC6, and DC9 (DC3CO no longer exists). The
overall programming and requirements to enter DC states are similar to
those of Xe_LPD+ although AUX transactions do not require DC5/DC6 exit
as they did previously.
Bspec: 68851, 68857, 68886, 69115
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-21-lucas.demarchi@intel.com
Add Display Power Well for Xe2_LPD. It's mostly the same as Xe_LPD+,
so reuse the code. PGPICA1 contains type-C capable port slices
which requires the well to power powered up, so add new power well
definition for it.
The DC_OFF fake power well will be added in a follow up commit.
v2: Do not rmw as bit 31 is the only R/W bit in the register (Matt Roper)
BSpec: 68886
Signed-off-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-20-lucas.demarchi@intel.com
Add a new CDCLK table for Lunar Lake.
v2:
- Remove mdclk from the table as it's not needed (Matt Roper)
- Update waveform values to the latest from spec (Matt Roper)
- Rename functions and calculation to match by pixel rate (Lucas)
v3: Keep only the table: as far as intel_pixel_rate_to_cdclk()
is concerned, the minimum cdclk should still be half the pixel
rate on Xe2 (bspec 68858:
"Pipe maximum pixel rate = 2 * CDCLK frequency * Pipe Ratio")
(Matt Roper)
Bspec: 68861, 68858
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-19-lucas.demarchi@intel.com
LNL's south display uses the same table as MTP. Check for LNL's fake PCH
to make it consistent with the other checks.
The VBT table doesn't contain the VBT -> spec mapping for LNL. Like in
other cases, uses the same as the previous platform.
Bspec: 68971, 20124
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-18-lucas.demarchi@intel.com
Xe2_LPD also needs workaround 15010685871. While adding the new display
version, also re-order the condition to follow the convention of new
version first.
v2: Remove redundant HAS_CDCLK_SQUASH(). As the platform or IP version
needing the workaround are handpicked, there is no need to also
check if tha platform has squashing support (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-17-lucas.demarchi@intel.com
Hotplug setup for Xe2_LPD differs from Xe_LPD+ by the fact that the
extra programming for hotplug inversion and DDI HPD filter duration is
not necessary anymore. As mtp_hpd_irq_setup() is reasonably small,
prefer to fork it into a new function for Xe2_LPD instead of adding a
platform check.
v2: Add extra bspec reference and fix missing else (Matt Roper)
BSpec: 68970, 69940
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-16-lucas.demarchi@intel.com
Starting from display version 20, we need to read the pin assignment
from the IOM TCSS_DDI_STATUS register instead of reading it from the
FIA.
We use the pin assignment to decide the maximum lane count. So, to
support this change, add a new lnl_tc_port_get_max_lane_count() function
that reads from the TCSS_DDI_STATUS register and decides the maximum
lane count based on that.
BSpec: 69594
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-14-lucas.demarchi@intel.com
Differently from previous version, Xe2_LPD groups all port AUX interrupt
bits into PICA interrupt registers.
While at it, drop some trailing newlines.
BSpec: 68958, 69697
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-13-lucas.demarchi@intel.com
The address of CTL and DATA registers for DP AUX were changed in Xe2_LPD:
now they are all in a single range, with CH_A and CH_B coming right after
the USBC instances. Like was done when moving registers to PICA, use
a helper macro to remap the ch passed to an index that can be used to
calculate the right offset.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-12-lucas.demarchi@intel.com
Similar to other protocol ops, it's useful for an scmi module driver to get
the number of supported performance domains, hence let's make this
available by adding a new perf protocol callback. Note that, a user is
being added from subsequent changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-2-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
A large collection of fixes around this time.
All small and mostly trivial fixes.
- Lots of fixes for the new -Wformat-truncation warnings
- A fix in ALSA rawmidi core regression and UMP handling
- Series of Cirrus codec fixes
- ASoC Intel and Realtek codec fixes
- Usual HD- and USB-audio quirks and AMD ASoC quirks
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmUMUWkOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE+hdxAA0+tcf9xj7Na58P3VCD0dCBddoJ4STModW8RZ
SnOevnjIMLa7TFKnxyBNWTgtBlKpaJ62c+/ZJJt0dgzDaYAX/6kGz9I9WN5w/81x
JKbXemtbv32h/STmE36G3j2pILzKMVo8Iew4aghga5t7QkZZuSfj5KPiKpg0lIE4
LGfAoaPUFvsgHGqKKP4Y2qOeGkR7LWJ6r66mtC0WMb5LNddPrdsWbscj0ZfeEceE
p3jQMk5Iw/d/8PueIdsVL0Epq8j46L+EKaNMgdG38eJsMxhhLnDoyZ4lRwIZ5Stg
X+BTFULw7v/ldp/vBOoJgQYkjI9g51T7H1h58oZP1xup68eE1+QVw2D/Jpx+zDv8
TZrp3YLlWMN3YVZKxKpum0AALGELYA1eSax94sifxwMOQ2P7ctDgVUVKq2mxiPWN
W+244dvoz1IB6ey22PRP7eSx015CHAtOosCPesSYs2M8OPsz0ckfxijz7PGcpqTD
7NFKAilG6lkMn638A4O1PG5l/DuMoIP8/W6JWeF83yCIxTvQVIcYdFxIku4rU8Lh
LbyHU6nV9pH+B2RDjZpPQNVNZfp/egFlLsKGaIc9Wqjuur7vjryXRNs2y2Xq/0jq
0xJsV8xoPj4WO2u4+sFkYNMZ5AjTPUGndGURA3QMMjsDUnAxTw6e4a5yf06V9hZU
ZaWVhRk=
=1MuW
-----END PGP SIGNATURE-----
Merge tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A large collection of fixes around this time.
All small and mostly trivial fixes.
- Lots of fixes for the new -Wformat-truncation warnings
- A fix in ALSA rawmidi core regression and UMP handling
- Series of Cirrus codec fixes
- ASoC Intel and Realtek codec fixes
- Usual HD- and USB-audio quirks and AMD ASoC quirks"
* tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (64 commits)
ALSA: hda/realtek - ALC287 Realtek I2S speaker platform support
ALSA: hda: cs35l56: Use the new RUNTIME_PM_OPS() macro
ALSA: usb-audio: scarlett_gen2: Fix another -Wformat-truncation warning
ALSA: rawmidi: Fix NULL dereference at proc read
ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful
ASoC: SOF: Intel: MTL: Reduce the DSP init timeout
ASoC: cs42l43: Add shared IRQ flag for shutters
ASoC: imx-audmix: Fix return error with devm_clk_get()
ASoC: hdaudio.c: Add missing check for devm_kstrdup
ALSA: riptide: Fix -Wformat-truncation warning for longname string
ALSA: cs4231: Fix -Wformat-truncation warning for longname string
ALSA: ad1848: Fix -Wformat-truncation warning for longname string
ALSA: hda: generic: Check potential mixer name string truncation
ALSA: cmipci: Fix -Wformat-truncation warning
ALSA: firewire: Fix -Wformat-truncation warning for MIDI stream names
ALSA: firewire: Fix -Wformat-truncation warning for longname string
ALSA: xen: Fix -Wformat-truncation warning
ALSA: opti9x: Fix -Wformat-truncation warning
ALSA: es1688: Fix -Wformat-truncation warning
ALSA: cs4236: Fix -Wformat-truncation warning
...
One patch to drop a non-existent alarm attribute in the nct6775 driver
-----BEGIN PGP SIGNATURE-----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=7x+T
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"One patch to drop a non-existent alarm attribute in the nct6775 driver"
* tag 'hwmon-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6775) Fix non-existent ALARM warning
When CONFIG_PRINTK is not set, PRINTK_MESSAGE_MAX is 0. This
leads to a zero-sized array @outbuf in @printk_shared_pbufs. In
console_flush_all() a pointer to the first element of the array
is assigned with:
char *outbuf = &printk_shared_pbufs.outbuf[0];
For !CONFIG_PRINTK this leads to a compiler warning:
warning: array subscript 0 is outside array bounds of
'char[0]' [-Warray-bounds]
This is not really dangerous because printk_get_next_message()
always returns false for !CONFIG_PRINTK, which leads to @outbuf
never being used. However, it makes no sense to even compile
these functions for !CONFIG_PRINTK.
Extend the existing '#ifdef CONFIG_PRINTK' block to contain
the formatting and emitting functions since these have no
purpose in !CONFIG_PRINTK. This also allows removing several
more !CONFIG_PRINTK dummies as well as moving
@suppress_panic_printk into a CONFIG_PRINTK block.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309201724.M9BMAQIh-lkp@intel.com/
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230920155238.670439-1-john.ogness@linutronix.de
Fix some whitespace issues for register definitions and keep the defines
for DP_AUX_CH_CTL and DP_AUX_CH_DATA in the right place: together with
the bit definition.
While at it add a TODO entry that those defines shouldn't be using an
implicit dev_priv.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-10-lucas.demarchi@intel.com
Do not read DE_RRMR register after display version 20. This register
contains display state information during GFX state dumps.
Bspec: 69456
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-9-lucas.demarchi@intel.com
Since Xe2LPD technically has FlatCCS, it doesn't have AuxCCS registers
like PLANE_AUX_DIST. However we currently have HAS_FLAT_CCS hardcoded
to 0 since compression isn't ready; we need to make sure this doesn't
cause the display code to go back to trying to write this register.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-8-lucas.demarchi@intel.com
We now start calculating relative plane data rate for cursor plane as
well, as instructed by BSpec and also treat cursor plane same way as
other planes, when doing allocation, i.e not using fixed allocation for
cursor anymore.
Bspec: 68907
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-7-lucas.demarchi@intel.com
Xe2_LPD doesn't have south display engine on a PCH, it's actually
on the SoC die (while north display engine is on compute die). As
such it makes no sense to go through the PCI devices looking for
an ISA bridge. The approach used by BXT/GLK can't be used here since
leaving it with PCH_NONE would mean taking the wrong code paths.
For the places we currently use a PCH check, it's enough for now to just
check the north display version. Use that to define a fake PCH to be
used across the driver. Eventually these PCH checks may need to be
re-designed as this is already the third platform using/needing a
fake PCH.
v2: Match on display IP version rather than on platform (Matt Roper)
v3: Extend and clarify commit message (Matt Roper / Ville)
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-6-lucas.demarchi@intel.com
If a particular pipe is disabled by fuse also remove the FBC for that
pipe.
Bspec: 69464
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-4-lucas.demarchi@intel.com
FBC is no longer limited by pipe: add the defines for pipes B and C that
will be used by platforms supporting FBC on such pipes.
Bspec: 68881, 68904
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-3-lucas.demarchi@intel.com
Add Lunar Lake platform definitions for i915 display. The support for
LNL will be added to the xe driver, with i915 only driving the display
side. Xe2 display is derived from the Xe_LPD+ IP; additional feature
deltas will be introduced in subsequent patches, so here it's just
adding a separate xe2_lpd_display struct.
v2: Use a LPDP_FEATURES macro (Matt Roper)
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-2-lucas.demarchi@intel.com
Add a FEATURES macro for XE_LPD+ as this is expected to be the baseline
for Xe2_LPD and will allow to see the delta more easily.
v2: Move everything from xe_lpdp_display to the new macro and remove
the version setting: it's not needed with GMD_ID.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-1-lucas.demarchi@intel.com
There are devices in the wild, like the Sony Xperia 1 V that *require*
different tuning than the base design for USB to work.
Add support for overriding the necessary tuning values.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-4-7d8c893d93f6@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Switch to regmap_fields, so that the values written into registers are
sanitized by their explicit sizes and the different registers are
structured in an iterable object to make external changes to the init
sequence simpler.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-2-7d8c893d93f6@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The EUSB2 repeater requires some alterations to its init sequence,
depending on board design.
Add support for making the necessary changes to that sequence to make USB
functional on SM8550-based Xperia 1 V.
They all have lackluster description due to lack of information.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-1-7d8c893d93f6@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This is merge model ALC287_FIXUP_THINKPAD_I2S_SPK and
ALC287_FIXUP_CS35L41_I2C_2_THINKPAD_ACPI.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Fixes: f7b069cf08 ("ALSA: hda/realtek: Fix generic fixup definition for cs35l41 amp")
Link: https://lore.kernel.org/r/82a45234327c4c50b4988a27e9f64c37@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix typo in the description of the 'succesfully'.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230912114646.8452-1-liubo03@inspur.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>