commit 2ab0837cb9 upstream.
When looking up a non-existent file, efivarfs returns -EINVAL if the
file does not conform to the NAME-GUID format and -ENOENT if it does.
This is caused by efivars_d_hash() returning -EINVAL if the name is not
formatted correctly. This error is returned before simple_lookup()
returns a negative dentry, and is the error value that the user sees.
Fix by removing this check. If the file does not exist, simple_lookup()
will return a negative dentry leading to -ENOENT and efivarfs_create()
already has a validity check before it creates an entry (and will
correctly return -EINVAL)
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: <stable@vger.kernel.org>
[ardb: make efivarfs_valid_name() static]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de6b43798d upstream.
Currently, the RIIC driver may run the I2C bus faster than requested,
which may cause subtle failures. E.g. Biju reported a measured bus
speed of 450 kHz instead of the expected maximum of 400 kHz on RZ/G2L.
The initial calculation of the bus period uses DIV_ROUND_UP(), to make
sure the actual bus speed never becomes faster than the requested bus
speed. However, the subsequent division-by-two steps do not use
round-up, which may lead to a too-small period, hence a too-fast and
possible out-of-spec bus speed. E.g. on RZ/Five, requesting a bus speed
of 100 resp. 400 kHz will yield too-fast target bus speeds of 100806
resp. 403226 Hz instead of 97656 resp. 390625 Hz.
Fix this by using DIV_ROUND_UP() in the subsequent divisions, too.
Tested on RZ/A1H, RZ/A2M, and RZ/Five.
Fixes: d982d66514 ("i2c: riic: remove clock and frequency restrictions")
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: <stable@vger.kernel.org> # v4.15+
Link: https://lore.kernel.org/r/c59aea77998dfea1b4456c4b33b55ab216fcbf5e.1732284746.git.geert+renesas@glider.be
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 224749be6c upstream.
This reverts commit be26ba9642.
Commit be26ba9642 ("block: Fix potential deadlock while freezing queue and
acquiring sysfs_loc") actually reverts commit 22465bbac5 ("blk-mq: move cpuhp
callback registering out of q->sysfs_lock"), and causes the original resctrl
lockdep warning.
So revert it and we need to fix the issue in another way.
Cc: Nilay Shroff <nilay@linux.ibm.com>
Fixes: be26ba9642 ("block: Fix potential deadlock while freezing queue and acquiring sysfs_loc")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241218101617.3275704-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce1219c3f7 upstream.
Currently, we don't use the return value from sock_queue_rcv_skb, which
means we may leak skbs if a message is not successfully queued to a
socket.
Instead, ensure that we're freeing the skb where the sock hasn't
otherwise taken ownership of the skb by adding checks on the
sock_queue_rcv_skb() to invoke a kfree on failure.
In doing so, rather than using the 'rc' value to trigger the
kfree_skb(), use the skb pointer itself, which is more explicit.
Also, add a kunit test for the sock delivery failure cases.
Fixes: 4a992bbd36 ("mctp: Implement message fragmentation & reassembly")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20241218-mctp-next-v2-1-1c1729645eaa@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbbd84af6b upstream.
The "gl->tot_len" variable is controlled by the user. It comes from
process_responses(). On 32bit systems, the "gl->tot_len +
sizeof(struct cpl_pass_accept_req) + sizeof(struct rss_header)" addition
could have an integer wrapping bug. Use size_add() to prevent this.
Fixes: a089439478 ("crypto: chtls - Register chtls with net tls")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c6bfb23c-2db2-4e1b-b8ab-ba3925c82ef5@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1201f226c8 upstream.
Snapshot the output of CPUID.0xD.[1..n] during kvm.ko initiliaization to
avoid the overead of CPUID during runtime. The offset, size, and metadata
for CPUID.0xD.[1..n] sub-leaves does not depend on XCR0 or XSS values, i.e.
is constant for a given CPU, and thus can be cached during module load.
On Intel's Emerald Rapids, CPUID is *wildly* expensive, to the point where
recomputing XSAVE offsets and sizes results in a 4x increase in latency of
nested VM-Enter and VM-Exit (nested transitions can trigger
xstate_required_size() multiple times per transition), relative to using
cached values. The issue is easily visible by running `perf top` while
triggering nested transitions: kvm_update_cpuid_runtime() shows up at a
whopping 50%.
As measured via RDTSC from L2 (using KVM-Unit-Test's CPUID VM-Exit test
and a slightly modified L1 KVM to handle CPUID in the fastpath), a nested
roundtrip to emulate CPUID on Skylake (SKX), Icelake (ICX), and Emerald
Rapids (EMR) takes:
SKX 11650
ICX 22350
EMR 28850
Using cached values, the latency drops to:
SKX 6850
ICX 9000
EMR 7900
The underlying issue is that CPUID itself is slow on ICX, and comically
slow on EMR. The problem is exacerbated on CPUs which support XSAVES
and/or XSAVEC, as KVM invokes xstate_required_size() twice on each
runtime CPUID update, and because there are more supported XSAVE features
(CPUID for supported XSAVE feature sub-leafs is significantly slower).
SKX:
CPUID.0xD.2 = 348 cycles
CPUID.0xD.3 = 400 cycles
CPUID.0xD.4 = 276 cycles
CPUID.0xD.5 = 236 cycles
<other sub-leaves are similar>
EMR:
CPUID.0xD.2 = 1138 cycles
CPUID.0xD.3 = 1362 cycles
CPUID.0xD.4 = 1068 cycles
CPUID.0xD.5 = 910 cycles
CPUID.0xD.6 = 914 cycles
CPUID.0xD.7 = 1350 cycles
CPUID.0xD.8 = 734 cycles
CPUID.0xD.9 = 766 cycles
CPUID.0xD.10 = 732 cycles
CPUID.0xD.11 = 718 cycles
CPUID.0xD.12 = 734 cycles
CPUID.0xD.13 = 1700 cycles
CPUID.0xD.14 = 1126 cycles
CPUID.0xD.15 = 898 cycles
CPUID.0xD.16 = 716 cycles
CPUID.0xD.17 = 748 cycles
CPUID.0xD.18 = 776 cycles
Note, updating runtime CPUID information multiple times per nested
transition is itself a flaw, especially since CPUID is a mandotory
intercept on both Intel and AMD. E.g. KVM doesn't need to ensure emulated
CPUID state is up-to-date while running L2. That flaw will be fixed in a
future patch, as deferring runtime CPUID updates is more subtle than it
appears at first glance, the benefits aren't super critical to have once
the XSAVE issue is resolved, and caching CPUID output is desirable even if
KVM's updates are deferred.
Cc: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241211013302.1347853-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03c7527e97 upstream.
Catalin reports that a hypervisor lying to a guest about the size
of the ASID field may result in unexpected issues:
- if the underlying HW does only supports 8 bit ASIDs, the ASID
field in a TLBI VAE1* operation is only 8 bits, and the HW will
ignore the other 8 bits
- if on the contrary the HW is 16 bit capable, the ASID field
in the same TLBI operation is always 16 bits, irrespective of
the value of TCR_ELx.AS.
This could lead to missed invalidations if the guest was lead to
assume that the HW had 8 bit ASIDs while they really are 16 bit wide.
In order to avoid any potential disaster that would be hard to debug,
prenent the migration between a host with 8 bit ASIDs to one with
wider ASIDs (the converse was obviously always forbidden). This is
also consistent with what we already do for VMIDs.
If it becomes absolutely mandatory to support such a migration path
in the future, we will have to trap and emulate all TLBIs, something
that nobody should look forward to.
Fixes: d5a32b60dc ("KVM: arm64: Allow userspace to change ID_AA64MMFR{0-2}_EL1")
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20241203190236.505759-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 747367340c upstream.
The intent of the check is to see whether at least one UMC has ECC
enabled. So do that instead of tracking which ones are enabled in masks
which are too small in size anyway and lead to not loading the driver on
Zen4 machines with UMCs enabled over UMC8.
Fixes: e2be5955a8 ("EDAC/amd64: Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh")
Reported-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Avadhut Naik <avadhut.naik@amd.com>
Reviewed-by: Avadhut Naik <avadhut.naik@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20241210212054.3895697-1-avadhut.naik@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 773c05f417 upstream.
It appears that the relatively popular RK3399 SoC has been put together
using a large amount of illicit substances, as experiments reveal that its
integration of GIC500 exposes the *secure* programming interface to
non-secure.
This has some pretty bad effects on the way priorities are handled, and
results in a dead machine if booting with pseudo-NMI enabled
(irqchip.gicv3_pseudo_nmi=1) if the kernel contains 18fdb6348c ("arm64:
irqchip/gic-v3: Select priorities at boot time"), which relies on the
priorities being programmed using the NS view.
Let's restore some sanity by going one step further and disable security
altogether in this case. This is not any worse, and puts us in a mode where
priorities actually make some sense.
Huge thanks to Mark Kettenis who initially identified this issue on
OpenBSD, and to Chen-Yu Tsai who reported the problem in Linux.
Fixes: 18fdb6348c ("arm64: irqchip/gic-v3: Select priorities at boot time")
Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Reported-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241213141037.3995049-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3d87abe11 upstream.
Current implementation leaves pdev->dev as a wakeup source. Add a
device_init_wakeup(&pdev->dev, false) call in the .remove() function and
in the error path of the .probe() function.
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Fixes: 527f36f5ef ("mmc: mediatek: add support for SDIO eint wakup IRQ")
Cc: stable@vger.kernel.org
Message-ID: <20241203023442.2434018-1-joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 572af9f284 ]
fwnode_find_mii_timestamper() calls of_parse_phandle_with_fixed_args()
but does not decrement the refcount of the obtained OF node. Add an
of_node_put() call before returning from the function.
This bug was detected by an experimental static analysis tool that I am
developing.
Fixes: bc1bee3b87 ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241218035106.1436405-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eecd85c77 ]
If PSAMPLE_ATTR_SAMPLE_PROBABILITY flag is to be sent, the available
size for the packet data has to be adjusted accordingly.
Also, check the error code returned by nla_put_flag.
Fixes: 7b1b2b60c6 ("net: psample: allow using rate as probability")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241217113739.3929300-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eb70dbebf ]
Empty netlink responses from do() are not correct (as opposed to
dump() where not dumping anything is perfectly fine).
We should return an error if the target object does not exist,
in this case if the netdev is down it has no queues.
Fixes: 6b6171db7f ("netdev-genl: Add netlink framework functions for queue")
Reported-by: syzbot+0a884bc2d304ce4af70f@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241218022508.815344-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16f027cd40 ]
Robert Hodaszi reports that locally terminated traffic towards
VLAN-unaware bridge ports is broken with ocelot-8021q. He is describing
the same symptoms as for commit 1f9fc48fd3 ("net: dsa: sja1105: fix
reception from VLAN-unaware bridges").
For context, the set merged as "VLAN fixes for Ocelot driver":
https://lore.kernel.org/netdev/20240815000707.2006121-1-vladimir.oltean@nxp.com/
was developed in a slightly different form earlier this year, in January.
Initially, the switch was unconditionally configured to set OCELOT_ES0_TAG
when using ocelot-8021q, regardless of port operating mode.
This led to the situation where VLAN-unaware bridge ports would always
push their PVID - see ocelot_vlan_unaware_pvid() - a negligible value
anyway - into RX packets. To strip this in software, we would have needed
DSA to know what private VID the switch chose for VLAN-unaware bridge
ports, and pushed into the packets. This was implemented downstream, and
a remnant of it remains in the form of a comment mentioning
ds->ops->get_private_vid(), as something which would maybe need to be
considered in the future.
However, for upstream, it was deemed inappropriate, because it would
mean introducing yet another behavior for stripping VLAN tags from
VLAN-unaware bridge ports, when one already existed (ds->untag_bridge_pvid).
The latter has been marked as obsolete along with an explanation why it
is logically broken, but still, it would have been confusing.
So, for upstream, felix_update_tag_8021q_rx_rule() was developed, which
essentially changed the state of affairs from "Felix with ocelot-8021q
delivers all packets as VLAN-tagged towards the CPU" into "Felix with
ocelot-8021q delivers all packets from VLAN-aware bridge ports towards
the CPU". This was done on the premise that in VLAN-unaware mode,
there's nothing useful in the VLAN tags, and we can avoid introducing
ds->ops->get_private_vid() in the DSA receive path if we configure the
switch to not push those VLAN tags into packets in the first place.
Unfortunately, and this is when the trainwreck started, the selftests
developed initially and posted with the series were not re-ran.
dsa_software_vlan_untag() was initially written given the assumption
that users of this feature would send _all_ traffic as VLAN-tagged.
It was only partially adapted to the new scheme, by removing
ds->ops->get_private_vid(), which also used to be necessary in
standalone ports mode.
Where the trainwreck became even worse is that I had a second opportunity
to think about this, when the dsa_software_vlan_untag() logic change
initially broke sja1105, in commit 1f9fc48fd3 ("net: dsa: sja1105: fix
reception from VLAN-unaware bridges"). I did not connect the dots that
it also breaks ocelot-8021q, for pretty much the same reason that not
all received packets will be VLAN-tagged.
To be compatible with the optimized Felix control path which runs
felix_update_tag_8021q_rx_rule() to only push VLAN tags when useful (in
VLAN-aware mode), we need to restore the old dsa_software_vlan_untag()
logic. The blamed commit introduced the assumption that
dsa_software_vlan_untag() will see only VLAN-tagged packets, assumption
which is false. What corrupts RX traffic is the fact that we call
skb_vlan_untag() on packets which are not VLAN-tagged in the first
place.
Fixes: 93e4649efa ("net: dsa: provide a software untagging function on RX for VLAN-aware bridges")
Reported-by: Robert Hodaszi <robert.hodaszi@digi.com>
Closes: https://lore.kernel.org/netdev/20241215163334.615427-1-robert.hodaszi@digi.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241216135059.1258266-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a17975992c ]
Fix the way tcpdump is executed by:
- Using the right variable for the namespace. Currently the use of the
empty "ns" makes the command fail.
- Waiting until it starts to capture to ensure the interesting traffic
is caught on slow systems.
- Using line-buffered output to ensure logs are available when the test
is paused with "-p". Otherwise the last chunk of data might only be
written when tcpdump is killed.
Fixes: 74cc26f416 ("selftests: openvswitch: add interface support")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20241217211652.483016-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70b6f46a4e ]
With CONFIG_PROVE_LOCKING, when creating a set of type bitmap:ip, adding
it to a set of type list:set and populating it from iptables SET target
triggers a kernel warning:
| WARNING: possible recursive locking detected
| 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted
| --------------------------------------------
| ping/4018 is trying to acquire lock:
| ffff8881094a6848 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set]
|
| but task is already holding lock:
| ffff88811034c048 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set]
This is a false alarm: ipset does not allow nested list:set type, so the
loop in list_set_kadd() can never encounter the outer set itself. No
other set type supports embedded sets, so this is the only case to
consider.
To avoid the false report, create a distinct lock class for list:set
type ipset locks.
Fixes: f830837f0e ("netfilter: ipset: list:set set type support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf2c97423a ]
The 'max_avail' value is calculated from the system memory
size using order_base_2().
order_base_2(x) is defined as '(x) ? fn(x) : 0'.
The compiler generates two copies of the code that follows
and then expands clamp(max, min, PAGE_SHIFT - 12) (11 on 32bit).
This triggers a compile-time assert since min is 5.
In reality a system would have to have less than 512MB memory
for the bounds passed to clamp to be reversed.
Swap the order of the arguments to clamp() to avoid the warning.
Replace the clamp_val() on the line below with clamp().
clamp_val() is just 'an accident waiting to happen' and not needed here.
Detected by compile time checks added to clamp(), specifically:
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYsT34UkGFKxus63H6UVpYi5GRZkezT9MRLfAbM3f6ke0g@mail.gmail.com/
Fixes: 4f325e2627 ("ipvs: dynamically limit the connection hash table")
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 743375f8de ]
The interrupt line of PCI devices is interpreted as edge-triggered,
however the interrupt signal of the m_can controller integrated in Intel
Elkhart Lake CPUs appears to be generated level-triggered.
Consider the following sequence of events:
- IR register is read, interrupt X is set
- A new interrupt Y is triggered in the m_can controller
- IR register is written to acknowledge interrupt X. Y remains set in IR
As at no point in this sequence no interrupt flag is set in IR, the
m_can interrupt line will never become deasserted, and no edge will ever
be observed to trigger another run of the ISR. This was observed to
result in the TX queue of the EHL m_can to get stuck under high load,
because frames were queued to the hardware in m_can_start_xmit(), but
m_can_finish_tx() was never run to account for their successful
transmission.
On an Elkhart Lake based board with the two CAN interfaces connected to
each other, the following script can reproduce the issue:
ip link set can0 up type can bitrate 1000000
ip link set can1 up type can bitrate 1000000
cangen can0 -g 2 -I 000 -L 8 &
cangen can0 -g 2 -I 001 -L 8 &
cangen can0 -g 2 -I 002 -L 8 &
cangen can0 -g 2 -I 003 -L 8 &
cangen can0 -g 2 -I 004 -L 8 &
cangen can0 -g 2 -I 005 -L 8 &
cangen can0 -g 2 -I 006 -L 8 &
cangen can0 -g 2 -I 007 -L 8 &
cangen can1 -g 2 -I 100 -L 8 &
cangen can1 -g 2 -I 101 -L 8 &
cangen can1 -g 2 -I 102 -L 8 &
cangen can1 -g 2 -I 103 -L 8 &
cangen can1 -g 2 -I 104 -L 8 &
cangen can1 -g 2 -I 105 -L 8 &
cangen can1 -g 2 -I 106 -L 8 &
cangen can1 -g 2 -I 107 -L 8 &
stress-ng --matrix 0 &
To fix the issue, repeatedly read and acknowledge interrupts at the
start of the ISR until no interrupt flags are set, so the next incoming
interrupt will also result in an edge on the interrupt line.
While we have received a report that even with this patch, the TX queue
can become stuck under certain (currently unknown) circumstances on the
Elkhart Lake, this patch completely fixes the issue with the above
reproducer, and it is unclear whether the remaining issue has a similar
cause at all.
Fixes: cab7ffc032 ("can: m_can: add PCI glue driver for Intel Elkhart Lake")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/fdf0439c51bcb3a46c21e9fb21c7f1d06363be84.1728288535.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fca2977629 ]
While an m_can controller usually already has the init flag from a
hardware reset, no such reset happens on the integrated m_can_pci of the
Intel Elkhart Lake. If the CAN controller is found in an active state,
m_can_dev_setup() would fail because m_can_niso_supported() calls
m_can_cccr_update_bits(), which refuses to modify any other configuration
bits when CCCR_INIT is not set.
To avoid this issue, set CCCR_INIT before attempting to modify any other
configuration flags.
Fixes: cd5a46ce6f ("can: m_can: don't enable transceiver when probing")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/e247f331cb72829fcbdfda74f31a59cbad1a6006.1728288535.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9b8301d36 ]
nsim_pp_hold_write() has two problems:
1) It may return with rtnl held, as found by syzbot.
2) Its return value does not propagate an error if any.
Fixes: 1580cbcbfe ("net: netdevsim: add some fake page pool use")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216083703.1859921-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cb2c504d7 ]
The OF node obtained by of_parse_phandle() is not freed. Call
of_node_put() to balance the refcount.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 1676aba5ef ("net: ethernet: bgmac: device tree phy enablement")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241214014912.2810315-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e592b5110b ]
There are two skb pointers to manage tx skb's enqueued from n/w stack.
waiting_tx_skb pointer points to the tx skb which needs to be processed
and ongoing_tx_skb pointer points to the tx skb which is being processed.
SPI thread prepares the tx data chunks from the tx skb pointed by the
ongoing_tx_skb pointer. When the tx skb pointed by the ongoing_tx_skb is
processed, the tx skb pointed by the waiting_tx_skb is assigned to
ongoing_tx_skb and the waiting_tx_skb pointer is assigned with NULL.
Whenever there is a new tx skb from n/w stack, it will be assigned to
waiting_tx_skb pointer if it is NULL. Enqueuing and processing of a tx skb
handled in two different threads.
Consider a scenario where the SPI thread processed an ongoing_tx_skb and
it moves next tx skb from waiting_tx_skb pointer to ongoing_tx_skb pointer
without doing any NULL check. At this time, if the waiting_tx_skb pointer
is NULL then ongoing_tx_skb pointer is also assigned with NULL. After
that, if a new tx skb is assigned to waiting_tx_skb pointer by the n/w
stack and there is a chance to overwrite the tx skb pointer with NULL in
the SPI thread. Finally one of the tx skb will be left as unhandled,
resulting packet missing and memory leak.
- Consider the below scenario where the TXC reported from the previous
transfer is 10 and ongoing_tx_skb holds an tx ethernet frame which can be
transported in 20 TXCs and waiting_tx_skb is still NULL.
tx_credits = 10; /* 21 are filled in the previous transfer */
ongoing_tx_skb = 20;
waiting_tx_skb = NULL; /* Still NULL */
- So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true.
- After oa_tc6_prepare_spi_tx_buf_for_tx_skbs()
ongoing_tx_skb = 10;
waiting_tx_skb = NULL; /* Still NULL */
- Perform SPI transfer.
- Process SPI rx buffer to get the TXC from footers.
- Now let's assume previously filled 21 TXCs are freed so we are good to
transport the next remaining 10 tx chunks from ongoing_tx_skb.
tx_credits = 21;
ongoing_tx_skb = 10;
waiting_tx_skb = NULL;
- So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true again.
- In the oa_tc6_prepare_spi_tx_buf_for_tx_skbs()
ongoing_tx_skb = NULL;
waiting_tx_skb = NULL;
- Now the below bad case might happen,
Thread1 (oa_tc6_start_xmit) Thread2 (oa_tc6_spi_thread_handler)
--------------------------- -----------------------------------
- if waiting_tx_skb is NULL
- if ongoing_tx_skb is NULL
- ongoing_tx_skb = waiting_tx_skb
- waiting_tx_skb = skb
- waiting_tx_skb = NULL
...
- ongoing_tx_skb = NULL
- if waiting_tx_skb is NULL
- waiting_tx_skb = skb
To overcome the above issue, protect the moving of tx skb reference from
waiting_tx_skb pointer to ongoing_tx_skb pointer and assigning new tx skb
to waiting_tx_skb pointer, so that the other thread can't access the
waiting_tx_skb pointer until the current thread completes moving the tx
skb reference safely.
Fixes: 53fbde8ab2 ("net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames")
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d2f320e12 ]
SPI thread wakes up to perform SPI transfer whenever there is an TX skb
from n/w stack or interrupt from MAC-PHY. Ethernet frame from TX skb is
transferred based on the availability tx credits in the MAC-PHY which is
reported from the previous SPI transfer. Sometimes there is a possibility
that TX skb is available to transmit but there is no tx credits from
MAC-PHY. In this case, there will not be any SPI transfer but the thread
will be running in an endless loop until tx credits available again.
So checking the availability of tx credits along with TX skb will prevent
the above infinite loop. When the tx credits available again that will be
notified through interrupt which will trigger the SPI transfer to get the
available tx credits.
Fixes: 53fbde8ab2 ("net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7203d10e93 ]
There is a check for NULL at the start of create_txqs() and
create_rxqs() which tess if "nic_dev->txqs" is non-NULL. The
intention is that if the device is already open and the queues
are already created then we don't create them a second time.
However, the bug is that if we have an error in the create_txqs()
then the pointer doesn't get set back to NULL. The NULL check
at the start of the function will say that it's already open when
it's not and the device can't be used.
Set ->txqs back to NULL on cleanup on error.
Fixes: c3e79baf1b ("net-next/hinic: Add logical Txq and Rxq")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0cc98faf-a0ed-4565-a55b-0fa2734bc205@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e78c20f327 ]
Small follow-up to align this to an equivalent behavior as the bond driver.
The change in 3625920b62 ("teaming: fix vlan_features computing") removed
the netdevice vlan_features when there is no team port attached, yet it
leaves the full set of enc_features intact.
Instead, leave the default features as pre 3625920b62, and recompute once
we do have ports attached. Also, similarly as in bonding case, call the
netdev_base_features() helper on the enc_features.
Fixes: 3625920b62 ("teaming: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241213123657.401868-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecc391a541 ]
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 103 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 103 != 100 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 102 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 102 != 100 missing queue keys
not ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:4 fail:1 xfail:0 xpass:0 skip:0 error:0
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: ab63a2387c ("netdev: add per-queue statistics")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1f3a2f5a7 ]
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 102 != 100
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 101 != 100
not ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0
not ok 1 selftests: drivers/net: queues.py # exit=1
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 6b6171db7f ("netdev-genl: Add netlink framework functions for queue")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43fb7bce88 ]
Since commit 0a77d947f5 ("ksmbd: check outstanding simultaneous SMB
operations"), ksmbd enforces a maximum number of simultaneous operations
for a connection. The problem is that reaching the limit causes ksmbd to
close the socket, and the client has no indication that it should have
slowed down.
This behaviour can be reproduced by setting "smb2 max credits = 128" (or
lower), and transferring a large file (25GB).
smbclient fails as below:
$ smbclient //192.168.1.254/testshare -U user%pass
smb: \> put file.bin
cli_push returned NT_STATUS_USER_SESSION_DELETED
putting file file.bin as \file.bin smb2cli_req_compound_submit:
Insufficient credits. 0 available, 1 needed
NT_STATUS_INTERNAL_ERROR closing remote file \file.bin
smb: \> smb2cli_req_compound_submit: Insufficient credits. 0 available,
1 needed
Windows clients fail with 0x8007003b (with smaller files even).
Fix this by delaying reading from the socket until there's room to
allocate a request. This effectively applies backpressure on the client,
so the transfer completes, albeit at a slower rate.
Fixes: 0a77d947f5 ("ksmbd: check outstanding simultaneous SMB operations")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83c47d9e0c ]
This changes the semantics of req_running to count all in-flight
requests on a given connection, rather than the number of elements
in the conn->request list. The latter is used only in smb2_cancel,
and the counter is not used
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 43fb7bce88 ("ksmbd: fix broken transfers when exceeding max simultaneous operations")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 922b4b955a ]
The existing linked list based implementation of how ts tags are
assigned and managed is unsafe against concurrency and corner cases:
- element addition in tx processing can race against element removal
in ts queue completion,
- element removal in ts queue completion can race against element
removal in device close,
- if a large number of frames gets added to tx queue without ts queue
completions in between, elements with duplicate tag values can get
added.
Use a different implementation, based on per-port used tags bitmaps and
saved skb arrays.
Safety for addition in tx processing vs removal in ts completion is
provided by:
tag = find_first_zero_bit(...);
smp_mb();
<write rdev->ts_skb[tag]>
set_bit(...);
vs
<read rdev->ts_skb[tag]>
smp_mb();
clear_bit(...);
Safety for removal in ts completion vs removal in device close is
provided by using atomic read-and-clear for rdev->ts_skb[tag]:
ts_skb = xchg(&rdev->ts_skb[tag], NULL);
if (ts_skb)
<handle it>
Fixes: 33f5d733b5 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://patch.msgid.link/20241212062558.436455-1-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b096d62ba1 ]
Some calls into ionic_get_module_eeprom() don't use a single
full buffer size, but instead multiple calls with an offset.
Teach our driver to use the offset correctly so we can
respond appropriately to the caller.
Fixes: 4d03e00a21 ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 746e6ae2e2 ]
There are some FW error handling paths that can cause us to
try to destroy the workqueue more than once, so let's be sure
we're checking for that.
The case where this popped up was in an AER event where the
handlers got called in such a way that ionic_reset_prepare()
and thus ionic_dev_teardown() got called twice in a row.
The second time through the workqueue was already destroyed,
and destroy_workqueue() choked on the bad wq pointer.
We didn't hit this in AER handler testing before because at
that time we weren't using a private workqueue. Later we
replaced the use of the system workqueue with our own private
workqueue but hadn't rerun the AER handler testing since then.
Fixes: 9e25450da7 ("ionic: add private workqueue per-device")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9590d32e09 ]
If register_netdev() fails, then the driver leaks the netdev notifier.
Fix this by calling ionic_lif_unregister() on register_netdev()
failure. This will also call ionic_lif_unregister_phc() if it has
already been registered.
Fixes: 30b87ab4c0 ("ionic: remove lif list concept")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 663ad7481f ]
Use the correct attribute space for sub-message key lookup in nested
attributes when adding attributes. This fixes rt_link where the "kind"
key and "data" sub-message are nested attributes in "linkinfo".
For example:
./tools/net/ynl/cli.py \
--create \
--spec Documentation/netlink/specs/rt_link.yaml \
--do newlink \
--json '{"link": 99,
"linkinfo": { "kind": "vlan", "data": {"id": 4 } }
}'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Fixes: ab463c4342 ("tools/net/ynl: Add support for encoding sub-messages")
Link: https://patch.msgid.link/20241213130711.40267-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d5df3a680 ]
Packets injected by the CPU should have a SRC_PORT field equal to the
CPU port module index in the Analyzer block (ocelot->num_phys_ports).
The blamed commit copied the ocelot_ifh_set_basic() call incorrectly
from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling
with "x", it calls with BIT_ULL(x), but the field is not a port mask,
but rather a single port index.
[ side note: this is the technical debt of code duplication :( ]
The error used to be silent and doesn't appear to have other
user-visible manifestations, but with new changes in the packing
library, it now fails loudly as follows:
------------[ cut here ]------------
Cannot store 0x40 inside bits 46-43 - will truncate
sja1105 spi2.0: xmit timed out
WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198
sja1105 spi2.0: timed out polling for tstamp
CPU: 1 UID: 0 PID: 102 Comm: felix_xmit
Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605
Call trace:
__pack+0x90/0x198 (P)
__pack+0x90/0x198 (L)
packing+0x78/0x98
ocelot_ifh_set_basic+0x260/0x368
ocelot_port_inject_frame+0xa8/0x250
felix_port_deferred_xmit+0x14c/0x258
kthread_worker_fn+0x134/0x350
kthread+0x114/0x138
The code path pertains to the ocelot switchdev driver and to the felix
secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q.
The messenger (packing) is not really to blame, so fix the original
commit instead.
Fixes: e1b9e80236 ("net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241212165546.879567-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5b8ee5022 ]
When receiving clc msg, the field length in smc_clc_msg_hdr indicates the
length of msg should be received from network and the value should not be
fully trusted as it is from the network. Once the value of length exceeds
the value of buflen in function smc_clc_wait_msg it may run into deadloop
when trying to drain the remaining data exceeding buflen.
This patch checks the return value of sock_recvmsg when draining data in
case of deadloop in draining.
Fixes: fb4f79264c ("net/smc: tolerate future SMCD versions")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ab332deb6 ]
When receiving proposal msg in server, the field smcd_v2_ext_offset in
proposal msg is from the remote client and can not be fully trusted.
Once the value of smcd_v2_ext_offset exceed the max value, there has
the chance to access wrong address, and crash may happen.
This patch checks the value of smcd_v2_ext_offset before using it.
Fixes: 5c21c4ccaf ("net/smc: determine accepted ISM devices")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7863c9f3d2 ]
When receiving proposal msg in server, the fields v2_ext_offset/
eid_cnt/ism_gid_cnt in proposal msg are from the remote client
and can not be fully trusted. Especially the field v2_ext_offset,
once exceed the max value, there has the chance to access wrong
address, and crash may happen.
This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt
before using them.
Fixes: 8c3dca341a ("net/smc: build and send V2 CLC proposal")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a29e220d3c ]
When receiving proposal msg in server, the field iparea_offset
and the field ipv6_prefixes_cnt in proposal msg are from the
remote client and can not be fully trusted. Especially the
field iparea_offset, once exceed the max value, there has the
chance to access wrong address, and crash may happen.
This patch checks iparea_offset and ipv6_prefixes_cnt before using them.
Fixes: e7b7a64a84 ("smc: support variable CLC proposal messages")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 679e9ddcf9 ]
When application sending data more than sndbuf_space, there have chances
application will sleep in epoll_wait, and will never be wakeup again. This
is caused by a race between smc_poll and smc_cdc_tx_handler.
application tasklet
smc_tx_sendmsg(len > sndbuf_space) |
epoll_wait for EPOLL_OUT,timeout=0 |
smc_poll |
if (!smc->conn.sndbuf_space) |
| smc_cdc_tx_handler
| atomic_add sndbuf_space
| smc_tx_sndbuf_nonfull
| if (!test_bit SOCK_NOSPACE)
| do not sk_write_space;
set_bit SOCK_NOSPACE; |
return mask=0; |
Application will sleep in epoll_wait as smc_poll returns 0. And
smc_cdc_tx_handler will not call sk_write_space because the SOCK_NOSPACE
has not be set. If there is no inflight cdc msg, sk_write_space will not be
called any more, and application will sleep in epoll_wait forever.
So check sndbuf_space again after NOSPACE flag is set to break the race.
Fixes: 8dce2786a2 ("net/smc: smc_poll improvements")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b33eb8f1b ]
link down work may be scheduled before lgr freed but execute
after lgr freed, which may result in crash. So it is need to
hold a reference before shedule link down work, and put the
reference after work executed or canceled.
The relevant crash call stack as follows:
list_del corruption. prev->next should be ffffb638c9c0fe20,
but was 0000000000000000
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:51!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 6 PID: 978112 Comm: kworker/6:119 Kdump: loaded Tainted: G #1
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 2221b89 04/01/2014
Workqueue: events smc_link_down_work [smc]
RIP: 0010:__list_del_entry_valid.cold+0x31/0x47
RSP: 0018:ffffb638c9c0fdd8 EFLAGS: 00010086
RAX: 0000000000000054 RBX: ffff942fb75e5128 RCX: 0000000000000000
RDX: ffff943520930aa0 RSI: ffff94352091fc80 RDI: ffff94352091fc80
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb638c9c0fc38
R10: ffffb638c9c0fc30 R11: ffffffffa015eb28 R12: 0000000000000002
R13: ffffb638c9c0fe20 R14: 0000000000000001 R15: ffff942f9cd051c0
FS: 0000000000000000(0000) GS:ffff943520900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4f25214000 CR3: 000000025fbae004 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
rwsem_down_write_slowpath+0x17e/0x470
smc_link_down_work+0x3c/0x60 [smc]
process_one_work+0x1ac/0x350
worker_thread+0x49/0x2f0
? rescuer_thread+0x360/0x360
kthread+0x118/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x1f/0x30
Fixes: 541afa10c1 ("net/smc: add smcr_port_err() and smcr_link_down() processing")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da4d8c8335 ]
If cxl_pci_ras_unmask() returns non-zero, cxl_pci_probe() will end up
returning that value, instead of zero.
Fixes: 248529edc8 ("cxl: add RAS status unmasking for CXL")
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20241115170032.108445-1-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91ae69c7ed ]
Align permissions of the resulting .nmconnection file, instead of
the input file from hv_kvp_daemon. To avoid the tiny time frame
where the output file is world-readable, use umask instead of chmod.
Fixes: 42999c9046 ("hv/hv_kvp_daemon:Support for keyfile based connection profile")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/20241016143521.3735-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241016143521.3735-1-olaf@aepfle.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c004a793e0 upstream.
The logic to check that the region past the end of the superblock is all
zeroes is wrong -- we don't want to check only the bytes past the end of
the maximally sized ondisk superblock structure as currently defined in
xfs_format.h; we want to check the bytes beyond the end of the ondisk as
defined by the feature bits.
Port the superblock size logic from xfs_repair and then put it to use in
xfs_scrub.
Cc: <stable@vger.kernel.org> # v4.15
Fixes: 21fb4cb198 ("xfs: scrub the secondary superblocks")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7f8a44f372 upstream.
For a sparse inodes filesystem, mkfs.xfs computes the values of
sb_spino_align and sb_inoalignmt with the following code:
int cluster_size = XFS_INODE_BIG_CLUSTER_SIZE;
if (cfg->sb_feat.crcs_enabled)
cluster_size *= cfg->inodesize / XFS_DINODE_MIN_SIZE;
sbp->sb_spino_align = cluster_size >> cfg->blocklog;
sbp->sb_inoalignmt = XFS_INODES_PER_CHUNK *
cfg->inodesize >> cfg->blocklog;
On a V5 filesystem with 64k fsblocks and 512 byte inodes, this results
in cluster_size = 8192 * (512 / 256) = 16384. As a result,
sb_spino_align and sb_inoalignmt are both set to zero. Unfortunately,
this trips the new sb_spino_align check that was just added to
xfs_validate_sb_common, and the mkfs fails:
# mkfs.xfs -f -b size=64k, /dev/sda
meta-data=/dev/sda isize=512 agcount=4, agsize=81136 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
= exchange=0 metadir=0
data = bsize=65536 blocks=324544, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=65536 ascii-ci=0, ftype=1, parent=0
log =internal log bsize=65536 blocks=5006, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=65536 blocks=0, rtextents=0
= rgcount=0 rgsize=0 extents
Discarding blocks...Sparse inode alignment (0) is invalid.
Metadata corruption detected at 0x560ac5a80bbe, xfs_sb block 0x0/0x200
libxfs_bwrite: write verifier failed on xfs_sb bno 0x0/0x1
mkfs.xfs: Releasing dirty buffer to free list!
found dirty buffer (bulk) on free list!
Sparse inode alignment (0) is invalid.
Metadata corruption detected at 0x560ac5a80bbe, xfs_sb block 0x0/0x200
libxfs_bwrite: write verifier failed on xfs_sb bno 0x0/0x1
mkfs.xfs: writing AG headers failed, err=22
Prior to commit 59e43f5479 this all worked fine, even if "sparse"
inodes are somewhat meaningless when everything fits in a single
fsblock. Adjust the checks to handle existing filesystems.
Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: 59e43f5479 ("xfs: sb_spino_align is not verified")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a440a28ddb upstream.
In commit ca6448aed4, we created an "end_daddr" variable to fix
fsmap reporting when the end of the range requested falls in the middle
of an unknown (aka free on the rmapbt) region. Unfortunately, I didn't
notice that the the code sets end_daddr to the last sector of the device
but then uses that quantity to compute the length of the synthesized
mapping.
Zizhi Wo later observed that when end_daddr isn't set, we still don't
report the last fsblock on a device because in that case (aka when
info->last is true), the info->high mapping that we pass to
xfs_getfsmap_group_helper has a startblock that points to the last
fsblock. This is also wrong because the code uses startblock to
compute the length of the synthesized mapping.
Fix the second problem by setting end_daddr unconditionally, and fix the
first problem by setting start_daddr to one past the end of the range to
query.
Cc: <stable@vger.kernel.org> # v6.11
Fixes: ca6448aed4 ("xfs: Fix missing interval for missing_owner in xfs fsmap")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reported-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
