[ Upstream commit a3f8c0a273 ]
When the driver requests Tx timestamp value, one of the first steps is
to clone SKB using skb_get. It increases the reference counter for that
SKB to prevent unexpected freeing by another component.
However, there may be a case where the index is requested, SKB is
assigned and never consumed by PTP flows - for example due to reset during
running PTP apps.
Add a check in release timestamping function to verify if the SKB
assigned to Tx timestamp latch was freed, and release remaining SKBs.
Fixes: 4901e83a94 ("idpf: add Tx timestamp capabilities negotiation")
Signed-off-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-1-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21f4d45eba ]
Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too.
While ipv4 tunnel headroom adjustment growth was limited in
commit 5ae1e9922b ("net: ip_tunnel: prevent perpetual headroom growth"),
ipv6 tunnel yet increases the headroom without any ceiling.
Reflect ipv4 tunnel headroom adjustment limit on ipv6 version.
Credits to Francesco Ruggeri, who was originally debugging this issue
and wrote local Arista-specific patch and a reproducer.
Fixes: 8eb30be035 ("ipv6: Create ip6_tnl_xmit")
Cc: Florian Westphal <fw@strlen.de>
Cc: Francesco Ruggeri <fruggeri05@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://patch.msgid.link/20251009-ip6_tunnel-headroom-v2-1-8e4dbd8f7e35@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4d0c909bf ]
The Broadcom bcm54811 is hardware-strapped to select among RGMII and
GMII/MII/MII-Lite modes. However, the corresponding bit, RGMII Enable
in Miscellaneous Control Register must be also set to select desired
RGMII or MII(-lite)/GMII mode.
Fixes: 3117a11fff ("net: phy: bcm54811: PHY initialization")
Signed-off-by: Kamil Horák - 2N <kamilh@axis.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251009130656.1308237-2-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70f92ab970 ]
After resume from S4 (hibernate), RTL8168H/RTL8111H truncates incoming
packets. Packet captures show messages like "IP truncated-ip - 146 bytes
missing!".
The issue is caused by RxConfig not being properly re-initialized after
resume. Re-initializing the RxConfig register before the chip
re-initialization sequence avoids the truncation and restores correct
packet reception.
This follows the same pattern as commit ef9da46dde ("r8169: fix data
corruption issue on RTL8402").
Fixes: 6e1d0b8988 ("r8169:add support for RTL8168H and RTL8107E")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20251009122549.3955845-1-lilinmao@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcb8b32a68 ]
If the internal flash contains missing or corrupted configuration,
basic communication over the bus still functions, but the device
is not capable of normal operation (for example, using mailboxes).
This condition is indicated in the info register by the ready bit.
If this bit is cleared, the probe procedure times out while fetching
the device state.
Handle this case by checking the ready bit value in zl3073x_dev_start()
and skipping DPLL device and pin registration if it is cleared.
Do not report this condition as an error, allowing the devlink device
to be registered and enabling the user to flash the correct configuration.
Prior this patch:
[ 31.112299] zl3073x-i2c 1-0070: Failed to fetch input state: -ETIMEDOUT
[ 31.116332] zl3073x-i2c 1-0070: error -ETIMEDOUT: Failed to start device
[ 31.136881] zl3073x-i2c 1-0070: probe with driver zl3073x-i2c failed with error -110
After this patch:
[ 41.011438] zl3073x-i2c 1-0070: FW not fully ready - missing or corrupted config
Fixes: 75a71ecc24 ("dpll: zl3073x: Register DPLL devices and pins")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251008141445.841113-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebb1031c51 ]
Refactor DPLL initialization and move DPLL (de)registration, monitoring
control, fetching device invariant parameters and phase offset
measurement block setup to separate functions.
Use these new functions during device probe and teardown functions and
during changes to the clock_id devlink parameter.
These functions will also be used in the next patch implementing devlink
flash, where this functionality is likewise required.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250909091532.11790-5-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: fcb8b32a68 ("dpll: zl3073x: Handle missing or corrupted flash configuration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93a27b5891 ]
Currently NETDEV_UNREGISTER event handler is not calling
j1939_cancel_active_session() and j1939_sk_queue_drop_all().
This will result in these calls being skipped when j1939_sk_release() is
called. And I guess that the reason syzbot is still reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
is caused by lack of these calls.
Calling j1939_cancel_active_session(priv, sk) from j1939_sk_release() can
be covered by calling j1939_cancel_active_session(priv, NULL) from
j1939_netdev_notify().
Calling j1939_sk_queue_drop_all() from j1939_sk_release() can be covered
by calling j1939_sk_netdev_event_netdown() from j1939_netdev_notify().
Therefore, we can reuse j1939_cancel_active_session(priv, NULL) and
j1939_sk_netdev_event_netdown(priv) for NETDEV_UNREGISTER event handler.
Fixes: 7fcbe5b2c6 ("can: j1939: implement NETDEV_UNREGISTER notification handler")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/3ad3c7f8-5a74-4b07-a193-cb0725823558@I-love.SAKURA.ne.jp
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b4b77eff5 ]
This sysctl is not per interface; it's global per netns.
Fixes: 292ecd9f5a ("doc: move seg6_flowlabel to seg6-sysctl.rst")
Reported-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65946eac6d ]
There is no error handling for `dma_map_single()` failures.
Add error handling by checking `dma_mapping_error()` and freeing
the `skb` using `dev_kfree_skb()` (process context) when it fails.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Tested-on: D-Link DGE-550T Rev-A3
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3abc0e55ea ]
Limit tx/rx buffer address to 32-bit address space for board with more
than 4GB DRAM.
Fixes: 804775dfc2 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Fixes: 6757d345dd ("net: ethernet: mtk_wed: introduce hw_rro support for MT7988")
Tested-by: Daniel Pawlik <pawlik.dan@gmail.com>
Tested-by: Matteo Croce <teknoraver@meta.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9e30a22d6 ]
A suspend/resume cycle on a down interface results in the interface
coming up in Error Active state. A suspend/resume cycle on an Up
interface will always result in Error Active state, regardless of the
actual CAN state.
During suspend, only set running interfaces to CAN_STATE_SLEEPING.
During resume only touch the CAN state of running interfaces. For
wakeup sources, set the CAN state depending on the Protocol Status
Regitser (PSR), for non wakeup source interfaces m_can_start() will do
the same.
Fixes: e0d1f4816f ("can: m_can: add Bosch M_CAN controller support")
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/20250929-m_can-fix-state-handling-v4-4-682b49b49d9a@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4942c42fe1 ]
In some SoCs (observed on the STM32MP15) the M_CAN IP core keeps the
CAN state and CAN error counters over an internal reset cycle. An
external reset is not always possible, due to the shared reset with
the other CAN core. This caused the core not always be in Error Active
state when bringing up the controller.
Instead of always setting the CAN state to Error Active in
m_can_chip_config(), fix this by reading and decoding the Protocol
Status Regitser (PSR) and set the CAN state accordingly.
Fixes: e0d1f4816f ("can: m_can: add Bosch M_CAN controller support")
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/20250929-m_can-fix-state-handling-v4-3-682b49b49d9a@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d9db29b45 ]
The CAN Error State is determined by the receive and transmit error
counters. The CAN error counters decrease when reception/transmission
is successful, so that a status transition back to the Error Active
status is possible. This transition is not handled by
m_can_handle_state_errors().
Add the missing detection of the Error Active state to
m_can_handle_state_errors() and extend the handling of this state in
m_can_handle_state_change().
Fixes: e0d1f4816f ("can: m_can: add Bosch M_CAN controller support")
Fixes: cd0d83eab2 ("can: m_can: m_can_handle_state_change(): fix state change")
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/20250929-m_can-fix-state-handling-v4-2-682b49b49d9a@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba569fb07a ]
Commit 227619c3ff ("can: m_can: move runtime PM enable/disable to
m_can_platform") moved the PM runtime enable from the m_can core
driver into the m_can_platform.
That patch forgot to move the pm_runtime_disable() to
m_can_plat_remove(), so that unloading the m_can_platform driver
causes an "Unbalanced pm_runtime_enable!" error message.
Add the missing pm_runtime_disable() to m_can_plat_remove() to fix the
problem.
Cc: Patrik Flykt <patrik.flykt@linux.intel.com>
Fixes: 227619c3ff ("can: m_can: move runtime PM enable/disable to m_can_platform")
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/20250929-m_can-fix-state-handling-v4-1-682b49b49d9a@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a779e27f24 ]
In be1e028302 ("coredump: don't pointlessly check and spew warnings")
we tried to fix input validation so it only happens during a write to
core_pattern. This would avoid needlessly logging a lot of warnings
during a read operation. However the logic accidently got inverted in
this commit. Fix it so the input validation only happens on write and is
skipped on read.
Fixes: be1e028302 ("coredump: don't pointlessly check and spew warnings")
Fixes: 16195d2c7d ("coredump: validate socket name as it is written")
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Yu Watanabe <watanabe.yu@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 154d1e7ad9 ]
The commit 168316db3583("dax: assert that i_rwsem is held
exclusive for writes") added lock assertions to ensure proper
locking in DAX operations. However, these assertions trigger
false-positive lockdep warnings since read lock is unnecessary
on read-only filesystems(e.g., erofs).
This patch skips the read lock assertion for read-only filesystems,
eliminating the spurious warnings while maintaining the integrity
checks for writable filesystems.
Fixes: 168316db35 ("dax: assert that i_rwsem is held exclusive for writes")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Friendy Su <friendy.su@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 46f781e0d1 upstream.
The sticky fingers quirk (MT_QUIRK_STICKY_FINGERS) was only considering
the case when slots were not released during the last report.
This can be problematic if the firmware forgets to release a finger
while others are still present.
This was observed on the Synaptics DLL0945 touchpad found on the Dell
XPS 9310 and the Dell Inspiron 5406.
Fixes: 4f4001bc76 ("HID: multitouch: fix rare Win 8 cases when the touch up event gets missing")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 75a5b8d4dd ]
After an bind/unbind cycle, the ncm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Call trace:
usb_ep_free_request+0x2c/0xec
ncm_bind+0x39c/0x3dc
usb_add_function+0xcc/0x1f0
configfs_composite_bind+0x468/0x588
gadget_bind_driver+0x104/0x270
really_probe+0x190/0x374
__driver_probe_device+0xa0/0x12c
driver_probe_device+0x3c/0x218
__device_attach_driver+0x14c/0x188
bus_for_each_drv+0x10c/0x168
__device_attach+0xfc/0x198
device_initial_probe+0x14/0x24
bus_probe_device+0x94/0x11c
device_add+0x268/0x48c
usb_add_gadget+0x198/0x28c
dwc3_gadget_init+0x700/0x858
__dwc3_set_mode+0x3cc/0x664
process_scheduled_works+0x1d8/0x488
worker_thread+0x244/0x334
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
Fixes: 9f6ce4240a ("usb: gadget: f_ncm.c added")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-3-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-3-4997bf277548@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 42988380ac ]
After an bind/unbind cycle, the ecm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Fixes: da741b8c56 ("usb ethernet gadget: split CDC Ethernet function")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-5-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-5-4997bf277548@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 47b2116e54 ]
After an bind/unbind cycle, the acm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Call trace:
usb_ep_free_request+0x2c/0xec
gs_free_req+0x30/0x44
acm_bind+0x1b8/0x1f4
usb_add_function+0xcc/0x1f0
configfs_composite_bind+0x468/0x588
gadget_bind_driver+0x104/0x270
really_probe+0x190/0x374
__driver_probe_device+0xa0/0x12c
driver_probe_device+0x3c/0x218
__device_attach_driver+0x14c/0x188
bus_for_each_drv+0x10c/0x168
__device_attach+0xfc/0x198
device_initial_probe+0x14/0x24
bus_probe_device+0x94/0x11c
device_add+0x268/0x48c
usb_add_gadget+0x198/0x28c
dwc3_gadget_init+0x700/0x858
__dwc3_set_mode+0x3cc/0x664
process_scheduled_works+0x1d8/0x488
worker_thread+0x244/0x334
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
Fixes: 1f1ba11b64 ("usb gadget: issue notifications from ACM function")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-4-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-4-4997bf277548@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0822894143 ]
After an bind/unbind cycle, the rndis->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Fixes: 45fe3b8e53 ("usb ethernet gadget: split RNDIS function")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-6-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-6-4997bf277548@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 201c53c687 ]
Introduce the free_usb_request() function that frees both the request's
buffer and the request itself.
This function serves as the cleanup callback for DEFINE_FREE() to enable
automatic, scope-based cleanup for usb_request pointers.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-2-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-2-4997bf277548@google.com
Stable-dep-of: 0822894143 ("usb: gadget: f_rndis: Refactor bind path to use __free()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bfb1d99d96 ]
Gadget function drivers often have goto-based error handling in their
bind paths, which can be bug-prone. Refactoring these paths to use
__free() scope-based cleanup is desirable, but currently blocked.
The blocker is that usb_ep_free_request(ep, req) requires two
parameters, while the __free() mechanism can only pass a pointer to the
request itself.
Store an endpoint pointer in the struct usb_request. The pointer is
populated centrally in usb_ep_alloc_request() on every successful
allocation, making the request object self-contained.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-1-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-1-4997bf277548@google.com
Stable-dep-of: 0822894143 ("usb: gadget: f_rndis: Refactor bind path to use __free()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0a6e9e098f ]
[Why]
commit 530694f54d ("drm/amdgpu: do not resume device in thaw for
normal hibernation") optimized the flow for systems that are going
into S4 where the power would be turned off. Basically the thaw()
callback wouldn't resume the device if the hibernation image was
successfully created since the system would be powered off.
This however isn't the correct flow for a system entering into
s0i3 after the hibernation image is created. Some of the amdgpu
callbacks have different behavior depending upon the intended
state of the suspend.
[How]
Use pm_hibernation_mode_is_suspend() as an input to decide whether
to run resume during thaw() callback.
Reported-by: Ionut Nechita <ionut_n2001@yahoo.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4573
Tested-by: Ionut Nechita <ionut_n2001@yahoo.com>
Fixes: 530694f54d ("drm/amdgpu: do not resume device in thaw for normal hibernation")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Kenneth Crudup <kenny@panix.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: 6.17+ <stable@vger.kernel.org> # 6.17+: 495c8d3503: PM: hibernate: Add pm_hibernation_mode_is_suspend()
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 495c8d3503 ]
Some drivers have different flows for hibernation and suspend. If
the driver opportunistically will skip thaw() then it needs a hint
to know what is happening after the hibernate.
Introduce a new symbol pm_hibernation_mode_is_suspend() that drivers
can call to determine if suspending the system for this purpose.
Tested-by: Ionut Nechita <ionut_n2001@yahoo.com>
Tested-by: Kenneth Crudup <kenny@panix.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 0a6e9e098f ("drm/amd: Fix hybrid sleep")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c760bcda83 upstream.
[Why]
Not all renoir hardware supports secure display. If the TA is present
but the feature isn't supported it will fail to load or send commands.
This shows ERR messages to the user that make it seems like there is
a problem.
[How]
Check the resp_status of the context to see if there was an error
before trying to send any secure display commands.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1415
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Adrian Yip <adrian.ytw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa4f4bae89 upstream.
Some file systems like FUSE-based ones or overlayfs may record the backing
file in struct vm_area_struct vm_file, instead of the user file that the
user mmapped.
That causes perf to misreport the device major/minor numbers of the file
system of the file, and the generation of the file, and potentially other
inode details. There is an existing helper file_user_inode() for that
situation.
Use file_user_inode() instead of file_inode() to get the inode for MMAP2
events.
Example:
Setup:
# cd /root
# mkdir test ; cd test ; mkdir lower upper work merged
# cp `which cat` lower
# mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
# perf record -e cycles:u -- /root/test/merged/cat /proc/self/maps
...
55b2c91d0000-55b2c926b000 r-xp 00018000 00:1a 3419 /root/test/merged/cat
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.004 MB perf.data (5 samples) ]
#
# stat /root/test/merged/cat
File: /root/test/merged/cat
Size: 1127792 Blocks: 2208 IO Block: 4096 regular file
Device: 0,26 Inode: 3419 Links: 1
Access: (0755/-rwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2025-09-08 12:23:59.453309624 +0000
Modify: 2025-09-08 12:23:59.454309624 +0000
Change: 2025-09-08 12:23:59.454309624 +0000
Birth: 2025-09-08 12:23:59.453309624 +0000
Before:
Device reported 00:02 differs from stat output and /proc/self/maps
# perf script --show-mmap-events | grep /root/test/merged/cat
cat 377 [-01] 243.078558: PERF_RECORD_MMAP2 377/377: [0x55b2c91d0000(0x9b000) @ 0x18000 00:02 3419 2068525940]: r-xp /root/test/merged/cat
After:
Device reported 00:1a is the same as stat output and /proc/self/maps
# perf script --show-mmap-events | grep /root/test/merged/cat
cat 362 [-01] 127.755167: PERF_RECORD_MMAP2 362/362: [0x55ba6e781000(0x9b000) @ 0x18000 00:1a 3419 0]: r-xp /root/test/merged/cat
With respect to stable kernels, overlayfs mmap function ovl_mmap() was
added in v4.19 but file_user_inode() was not added until v6.8 and never
back-ported to stable kernels. FMODE_BACKING that it depends on was added
in v6.5. This issue has gone largely unnoticed, so back-porting before
v6.8 is probably not worth it, so put 6.8 as the stable kernel prerequisite
version, although in practice the next long term kernel is 6.12.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8818f507a9 upstream.
Some file systems like FUSE-based ones or overlayfs may record the backing
file in struct vm_area_struct vm_file, instead of the user file that the
user mmapped.
Since commit def3ae83da ("fs: store real path instead of fake path in
backing file f_path"), file_path() no longer returns the user file path
when applied to a backing file. There is an existing helper
file_user_path() for that situation.
Use file_user_path() instead of file_path() to get the path for MMAP
and MMAP2 events.
Example:
Setup:
# cd /root
# mkdir test ; cd test ; mkdir lower upper work merged
# cp `which cat` lower
# mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
# perf record -e intel_pt//u -- /root/test/merged/cat /proc/self/maps
...
55b0ba399000-55b0ba434000 r-xp 00018000 00:1a 3419 /root/test/merged/cat
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.060 MB perf.data ]
#
Before:
File name is wrong (/cat), so decoding fails:
# perf script --no-itrace --show-mmap-events
cat 367 [016] 100.491492: PERF_RECORD_MMAP2 367/367: [0x55b0ba399000(0x9b000) @ 0x18000 00:02 3419 489959280]: r-xp /cat
...
# perf script --itrace=e | wc -l
Warning:
19 instruction trace errors
19
#
After:
File name is correct (/root/test/merged/cat), so decoding is ok:
# perf script --no-itrace --show-mmap-events
cat 364 [016] 72.153006: PERF_RECORD_MMAP2 364/364: [0x55ce4003d000(0x9b000) @ 0x18000 00:02 3419 3132534314]: r-xp /root/test/merged/cat
# perf script --itrace=e
# perf script --itrace=e | wc -l
0
#
Fixes: def3ae83da ("fs: store real path instead of fake path in backing file f_path")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebfc8542ad upstream.
It was reported that Intel PT address filters do not work in Docker
containers. That relates to the use of overlayfs.
overlayfs records the backing file in struct vm_area_struct vm_file,
instead of the user file that the user mmapped. In order for an address
filter to match, it must compare to the user file inode. There is an
existing helper file_user_inode() for that situation.
Use file_user_inode() instead of file_inode() to get the inode for address
filter matching.
Example:
Setup:
# cd /root
# mkdir test ; cd test ; mkdir lower upper work merged
# cp `which cat` lower
# mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
# perf record --buildid-mmap -e intel_pt//u --filter 'filter * @ /root/test/merged/cat' -- /root/test/merged/cat /proc/self/maps
...
55d61d246000-55d61d2e1000 r-xp 00018000 00:1a 3418 /root/test/merged/cat
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.015 MB perf.data ]
# perf buildid-cache --add /root/test/merged/cat
Before:
Address filter does not match so there are no control flow packets
# perf script --itrace=e
# perf script --itrace=b | wc -l
0
# perf script -D | grep 'TIP.PGE' | wc -l
0
#
After:
Address filter does match so there are control flow packets
# perf script --itrace=e
# perf script --itrace=b | wc -l
235
# perf script -D | grep 'TIP.PGE' | wc -l
57
#
With respect to stable kernels, overlayfs mmap function ovl_mmap() was
added in v4.19 but file_user_inode() was not added until v6.8 and never
back-ported to stable kernels. FMODE_BACKING that it depends on was added
in v6.5. This issue has gone largely unnoticed, so back-porting before
v6.8 is probably not worth it, so put 6.8 as the stable kernel prerequisite
version, although in practice the next long term kernel is 6.12.
Closes: https://lore.kernel.org/linux-perf-users/aBCwoq7w8ohBRQCh@fremen.lan
Reported-by: Edd Barrett <edd@theunixzoo.co.uk>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e5ae8d1eb0 upstream.
The previous timeout of 500us seems to be too small; panning the map in
the Roll20 VTT in Firefox on a KDE/Wayland desktop reliably triggered
timeouts within a few seconds of usage, causing the monitor to freeze
and the following to be printed to dmesg:
[Jul30 13:44] xe 0000:03:00.0: [drm] *ERROR* GT0: Global invalidation timeout
[Jul30 13:48] xe 0000:03:00.0: [drm] *ERROR* [CRTC:82:pipe A] flip_done timed out
I haven't hit a single timeout since increasing it to 1000us even after
several multi-hour testing sessions.
Fixes: 0dd2dd0182 ("drm/xe: Move DSB l2 flush to a more sensible place")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5710
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250912223254.147940-1-kenneth@whitecape.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 146046907b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0de79f66a upstream.
GFX12 MES uses low 32 bits of status return for success (1 or 0)
and high bits for debug information if low bits are 0.
GFX11 MES doesn't do this so checking full 64-bit status return
for 1 or 0 is still valid.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6df8e84aa6 upstream.
The atomic variable vm_fault_info_updated is used to synchronize access to
adev->gmc.vm_fault_info between the interrupt handler and
get_vm_fault_info().
The default atomic functions like atomic_set() and atomic_read() do not
provide memory barriers. This allows for CPU instruction reordering,
meaning the memory accesses to vm_fault_info and the vm_fault_info_updated
flag are not guaranteed to occur in the intended order. This creates a
race condition that can lead to inconsistent or stale data being used.
The previous implementation, which used an explicit mb(), was incomplete
and inefficient. It failed to account for all potential CPU reorderings,
such as the access of vm_fault_info being reordered before the atomic_read
of the flag. This approach is also more verbose and less performant than
using the proper atomic functions with acquire/release semantics.
Fix this by switching to atomic_set_release() and atomic_read_acquire().
These functions provide the necessary acquire and release semantics,
which act as memory barriers to ensure the correct order of operations.
It is also more efficient and idiomatic than using explicit full memory
barriers.
Fixes: b97dfa27ef ("drm/amdgpu: save vm fault information for amdkfd")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5801e65206 upstream.
When adding dependencies with drm_sched_job_add_dependency(), that
function consumes the fence reference both on success and failure, so in
the latter case the dma_fence_put() on the error path (xarray failed to
expand) is a double free.
Interestingly this bug appears to have been present ever since
commit ebd5f74255 ("drm/sched: Add dependency tracking"), since the code
back then looked like this:
drm_sched_job_add_implicit_dependencies():
...
for (i = 0; i < fence_count; i++) {
ret = drm_sched_job_add_dependency(job, fences[i]);
if (ret)
break;
}
for (; i < fence_count; i++)
dma_fence_put(fences[i]);
Which means for the failing 'i' the dma_fence_put was already a double
free. Possibly there were no users at that time, or the test cases were
insufficient to hit it.
The bug was then only noticed and fixed after
commit 9c2ba26535 ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2")
landed, with its fixup of
commit 4eaf02d607 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies").
At that point it was a slightly different flavour of a double free, which
commit 963d0b3569 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")
noticed and attempted to fix.
But it only moved the double free from happening inside the
drm_sched_job_add_dependency(), when releasing the reference not yet
obtained, to the caller, when releasing the reference already released by
the former in the failure case.
As such it is not easy to identify the right target for the fixes tag so
lets keep it simple and just continue the chain.
While fixing we also improve the comment and explain the reason for taking
the reference and not dropping it.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 963d0b3569 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/aNFbXq8OeYl3QSdm@stanley.mountain/
Cc: Christian König <christian.koenig@amd.com>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Philipp Stanner <phasta@kernel.org>
Cc: Christian König <ckoenig.leichtzumerken@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20251015084015.6273-1-tvrtko.ursulin@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cf11d80db upstream.
The __component_match_add function may assign the 'matchptr' pointer
the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced.
The call stack leading to the error looks like this:
hda_component_manager_init
|-> component_match_add
|-> component_match_add_release
|-> __component_match_add ( ... ,**matchptr, ... )
|-> *matchptr = ERR_PTR(-ENOMEM); // assign
|-> component_master_add_with_match( ... match)
|-> component_match_realloc(match, match->num); // dereference
Add IS_ERR() check to prevent the crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: ae7abe36e3 ("ALSA: hda/realtek: Add CS35L41 support for Thinkpad laptops")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8527bbb339 upstream.
Return value of a function acpi_evaluate_dsm() is dereferenced without
checking for NULL, but it is usually checked for this function.
acpi_evaluate_dsm() may return NULL, when acpi_evaluate_object() returns
acpi_status other than ACPI_SUCCESS, so add a check to prevent the crach.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 447106e92a ("ALSA: hda: cs35l41: Support mute notifications for CS35L41 HDA")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ec6f94342 upstream.
HP ZBook 17 G6 with SSID 103c:860c requires a similar workaround as
its 15-inch model in order to make the speaker and mute LED working.
Add the corresponding quirk entry to address it.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220372
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30b3211aa2 upstream.
This motherboard uses USB audio instead, causing this driver to complain
about "no codecs found!".
Add it to the denylist to silence the warning.
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e41e5a91a upstream.
In order to compare the resource against the HMAT memory target,
the resource needs to be memory type. Change the DEFINE_RES()
macro to DEFINE_RES_MEM() in order to set the correct resource type.
hmat_get_extended_linear_cache_size() uses resource_contains()
internally. This causes a regression for platforms with the
extended linear cache enabled as the comparison always fails and the
cache size is not set. User visible impact is that when 'cxl list' is
issued, a CXL region with extended linear cache support will only
report half the size of the actual size. And this also breaks MCE
reporting of the memory region due to incorrect offset calculation
for the memory.
[dj: Fixup commit log suggested by djbw]
[dj: Fixup stable address for cc]
Fixes: 12b3d697c8 ("cxl: Remove core/acpi.c and cxl core dependency on ACPI")
Cc: stable@vger.kernel.org
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6447b0e355 upstream.
Malicious SMB server can send invalid reply to FSCTL_DFS_GET_REFERRALS
- reply smaller than sizeof(struct get_dfs_referral_rsp)
- reply with number of referrals smaller than NumberOfReferrals in the
header
Processing of such replies will cause oob.
Return -EINVAL error on such replies to prevent oob-s.
Signed-off-by: Eugene Korenevsky <ekorenevsky@aliyun.com>
Cc: stable@vger.kernel.org
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a27f6a8fb upstream.
This issue was found by Runcheng Lu when develop HSCanT USB to CAN FD
converter[1]. The original developers may have only 3 interfaces
device to test so they write 3 here and wait for future change.
During the HSCanT development, we actually used 4 interfaces, so the
limitation of 3 is not enough now. But just increase one is not
future-proofed. Since the channel index type in gs_host_frame is u8,
just make canch[] become a flexible array with a u8 index, so it
naturally constraint by U8_MAX and avoid statically allocate 256
pointer for every gs_usb device.
[1]: https://github.com/cherry-embedded/HSCanT-hardware
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Reported-by: Runcheng Lu <runcheng.lu@hpmicro.com>
Cc: stable@vger.kernel.org
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Celeste Liu <uwu@coelacanthus.name>
Link: https://patch.msgid.link/20250930-gs-usb-max-if-v5-1-863330bf6666@coelacanthus.name
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a12f0bc764 upstream.
The gs_usb driver supports USB devices with more than 1 CAN channel.
In old kernel before 3.15, it uses net_device->dev_id to distinguish
different channel in userspace, which was done in commit
acff76fa45 ("can: gs_usb: gs_make_candev(): set netdev->dev_id").
But since 3.15, the correct way is populating net_device->dev_port.
And according to documentation, if network device support multiple
interface, lack of net_device->dev_port SHALL be treated as a bug.
Fixes: acff76fa45 ("can: gs_usb: gs_make_candev(): set netdev->dev_id")
Cc: stable@vger.kernel.org
Signed-off-by: Celeste Liu <uwu@coelacanthus.name>
Link: https://patch.msgid.link/20250930-gs-usb-populate-net_device-dev_port-v1-1-68a065de6937@coelacanthus.name
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5a51bf4e9 upstream.
Currently, when building a free space tree at populate_free_space_tree(),
if we are not using the block group tree feature, we always expect to find
block group items (either extent items or a block group item with key type
BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with
btrfs_search_slot_for_read(), so we assert that we found an item. However
this expectation is wrong since we can have a new block group created in
the current transaction which is still empty and for which we still have
not added the block group's item to the extent tree, in which case we do
not have any items in the extent tree associated to the block group.
The insertion of a new block group's block group item in the extent tree
happens at btrfs_create_pending_block_groups() when it calls the helper
insert_block_group_item(). This typically is done when a transaction
handle is released, committed or when running delayed refs (either as
part of a transaction commit or when serving tickets for space reservation
if we are low on free space).
So remove the assertion at populate_free_space_tree() even when the block
group tree feature is not enabled and update the comment to mention this
case.
Syzbot reported this with the following stack trace:
BTRFS info (device loop3 state M): rebuilding free space tree
assertion failed: ret == 0 :: 0, in fs/btrfs/free-space-tree.c:1115
------------[ cut here ]------------
kernel BUG at fs/btrfs/free-space-tree.c:1115!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 6352 Comm: syz.3.25 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:populate_free_space_tree+0x700/0x710 fs/btrfs/free-space-tree.c:1115
Code: ff ff e8 d3 (...)
RSP: 0018:ffffc9000430f780 EFLAGS: 00010246
RAX: 0000000000000043 RBX: ffff88805b709630 RCX: fea61d0e2e79d000
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffffc9000430f8b0 R08: ffffc9000430f4a7 R09: 1ffff92000861e94
R10: dffffc0000000000 R11: fffff52000861e95 R12: 0000000000000001
R13: 1ffff92000861f00 R14: dffffc0000000000 R15: 0000000000000000
FS: 00007f424d9fe6c0(0000) GS:ffff888125afc000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd78ad212c0 CR3: 0000000076d68000 CR4: 00000000003526f0
Call Trace:
<TASK>
btrfs_rebuild_free_space_tree+0x1ba/0x6d0 fs/btrfs/free-space-tree.c:1364
btrfs_start_pre_rw_mount+0x128f/0x1bf0 fs/btrfs/disk-io.c:3062
btrfs_remount_rw fs/btrfs/super.c:1334 [inline]
btrfs_reconfigure+0xaed/0x2160 fs/btrfs/super.c:1559
reconfigure_super+0x227/0x890 fs/super.c:1076
do_remount fs/namespace.c:3279 [inline]
path_mount+0xd1a/0xfe0 fs/namespace.c:4027
do_mount fs/namespace.c:4048 [inline]
__do_sys_mount fs/namespace.c:4236 [inline]
__se_sys_mount+0x313/0x410 fs/namespace.c:4213
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f424e39066a
Code: d8 64 89 02 (...)
RSP: 002b:00007f424d9fde68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f424d9fdef0 RCX: 00007f424e39066a
RDX: 0000200000000180 RSI: 0000200000000380 RDI: 0000000000000000
RBP: 0000200000000180 R08: 00007f424d9fdef0 R09: 0000000000000020
R10: 0000000000000020 R11: 0000000000000246 R12: 0000200000000380
R13: 00007f424d9fdeb0 R14: 0000000000000000 R15: 00002000000002c0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Reported-by: syzbot+884dc4621377ba579a6f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/68dc3dab.a00a0220.102ee.004e.GAE@google.com/
Fixes: a5ed918285 ("Btrfs: implement the free space B-tree")
CC: <stable@vger.kernel.org> # 6.1.x: 1961d20f6f: btrfs: fix assertion when building free space tree
CC: <stable@vger.kernel.org> # 6.1.x
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fec9b9d3ce upstream.
At the end of btrfs_load_block_group_zone_info() the first thing we do
is to ensure that if the mapping type is not a SINGLE one and there is
no RAID stripe tree, then we return early with an error.
Doing that, though, prevents the code from running the last calls from
this function which are about freeing memory allocated during its
run. Hence, in this case, instead of returning early, we set the ret
value and fall through the rest of the cleanup code.
Fixes: 5906333cc4 ("btrfs: zoned: don't skip block group profile checks on conventional zones")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ab2fa6969 upstream.
The intent of btrfs_readahead_expand() was to expand to the length of
the current compressed extent being read. However, "ram_bytes" is *not*
that, in the case where a single physical compressed extent is used for
multiple file extents.
Consider this case with a large compressed extent C and then later two
non-compressed extents N1 and N2 written over C, leaving C1 and C2
pointing to offset/len pairs of C:
[ C ]
[ N1 ][ C1 ][ N2 ][ C2 ]
In such a case, ram_bytes for both C1 and C2 is the full uncompressed
length of C. So starting readahead in C1 will expand the readahead past
the end of C1, past N2, and into C2. This will then expand readahead
again, to C2_start + ram_bytes, way past EOF. First of all, this is
totally undesirable, we don't want to read the whole file in arbitrary
chunks of the large underlying extent if it happens to exist. Secondly,
it results in zeroing the range past the end of C2 up to ram_bytes. This
is particularly unpleasant with fs-verity as it can zero and set
uptodate pages in the verity virtual space past EOF. This incorrect
readahead behavior can lead to verity verification errors, if we iterate
in a way that happens to do the wrong readahead.
Fix this by using em->len for readahead expansion, not em->ram_bytes,
resulting in the expected behavior of stopping readahead at the extent
boundary.
Reported-by: Max Chernoff <git@maxchernoff.ca>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2399898
Fixes: 9e9ff875e4 ("btrfs: use readahead_expand() on compressed extents")
CC: stable@vger.kernel.org # 6.17
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7fdfd29a1 upstream.
[BUG]
With v6.17-rc kernels, btrfs will always set 'ssd' mount option even if
the block device is not a rotating one:
# cat /sys/block/sdd/queue/rotational
1
# cat /etc/fstab:
LABEL=DATA2 /data2 btrfs rw,relatime,space_cache=v2,subvolid=5,subvol=/,nofail,nosuid,nodev 0 0
# mount
[...]
/dev/sdd on /data2 type btrfs (rw,nosuid,nodev,relatime,ssd,space_cache=v2,subvolid=5,subvol=/)
[CAUSE]
The 'ssd' mount option is set by set_device_specific_options(), and it
expects that if there is any rotating device in the btrfs, it will set
fs_devices::rotating.
However after commit bddf57a707 ("btrfs: delay btrfs_open_devices()
until super block is created"), the device opening is delayed until the
super block is created.
But the timing of set_device_specific_options() is still left as is,
this makes the function be called without any device opened.
Since no device is opened, thus fs_devices::rotating will never be set,
making btrfs incorrectly set 'ssd' mount option.
[FIX]
Only call set_device_specific_options() after btrfs_open_devices().
Also only call set_device_specific_options() after a new mount, if we're
mounting a mounted btrfs, there is no need to set the device specific
mount options again.
Reported-by: HAN Yuwei <hrx@bupt.moe>
Link: https://lore.kernel.org/linux-btrfs/C8FF75669DFFC3C5+5f93bf8a-80a0-48a6-81bf-4ec890abc99a@bupt.moe/
Fixes: bddf57a707 ("btrfs: delay btrfs_open_devices() until super block is created")
CC: stable@vger.kernel.org # 6.17
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53a4acbfc1 upstream.
On 'btrfs_ioctl_qgroup_assign' we first duplicate the argument as
provided by the user, which is kfree'd in the end. But this was not the
case when allocating memory for 'prealloc'. In this case, if it somehow
failed, then the previous code would go directly into calling
'mnt_drop_write_file', without freeing the string duplicated from the
user space.
Fixes: 4addc1ffd6 ("btrfs: qgroup: preallocate memory before adding a relation")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e5a5983ed upstream.
When starting relocation, at reloc_chunk_start(), if we happen to find
the flag BTRFS_FS_RELOC_RUNNING is already set we return an error
(-EINPROGRESS) to the callers, however the callers call reloc_chunk_end()
which will clear the flag BTRFS_FS_RELOC_RUNNING, which is wrong since
relocation was started by another task and still running.
Finding the BTRFS_FS_RELOC_RUNNING flag already set is an unexpected
scenario, but still our current behaviour is not correct.
Fix this by never calling reloc_chunk_end() if reloc_chunk_start() has
returned an error, which is what logically makes sense, since the general
widespread pattern is to have end functions called only if the counterpart
start functions succeeded. This requires changing reloc_chunk_start() to
clear BTRFS_FS_RELOC_RUNNING if there's a pending cancel request.
Fixes: 907d2710d7 ("btrfs: add cancellable chunk relocation support")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d3ad18394 upstream.
syzbot reported a BUG_ON in ext4_es_cache_extent() when opening a verity
file on a corrupted ext4 filesystem mounted without a journal.
The issue is that the filesystem has an inode with both the INLINE_DATA
and EXTENTS flags set:
EXT4-fs error (device loop0): ext4_cache_extents:545: inode #15:
comm syz.0.17: corrupted extent tree: lblk 0 < prev 66
Investigation revealed that the inode has both flags set:
DEBUG: inode 15 - flag=1, i_inline_off=164, has_inline=1, extents_flag=1
This is an invalid combination since an inode should have either:
- INLINE_DATA: data stored directly in the inode
- EXTENTS: data stored in extent-mapped blocks
Having both flags causes ext4_has_inline_data() to return true, skipping
extent tree validation in __ext4_iget(). The unvalidated out-of-order
extents then trigger a BUG_ON in ext4_es_cache_extent() due to integer
underflow when calculating hole sizes.
Fix this by detecting this invalid flag combination early in ext4_iget()
and rejecting the corrupted inode.
Cc: stable@kernel.org
Reported-and-tested-by: syzbot+038b7bf43423e132b308@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=038b7bf43423e132b308
Suggested-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Message-ID: <20250930112810.315095-1-kartikey406@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
