[ Upstream commit 2aa34191f0 ]
Rework .get interface to use the binary search array, this needs a specific
lookup function to match on end intervals (<=). Packet path lookup is slight
different because match is on lesser value, not equal (ie. <).
After this patch, seqcount can be removed in a follow up patch.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: 782f268812 ("netfilter: nft_set_rbtree: validate element belonging to interval")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e43e0a114 ]
The rbtree can temporarily store overlapping inactive elements during
the transaction processing, leading to false negative lookups.
To address this issue, this patch adds a .commit function that walks the
the rbtree to build a array of intervals of ordered elements. This
conversion compacts the two singleton elements that represent the start
and the end of the interval into a single interval object for space
efficient.
Binary search is O(log n), similar to rbtree lookup time, therefore,
performance number should be similar, and there is an implementation
available under lib/bsearch.c and include/linux/bsearch.h that is used
for this purpose.
This slightly increases memory consumption for this new array that
stores pointers to the start and the end of the interval.
With this patch:
# time nft -f 100k-intervals-set.nft
real 0m4.218s
user 0m3.544s
sys 0m0.400s
Without this patch:
# time nft -f 100k-intervals-set.nft
real 0m3.920s
user 0m3.547s
sys 0m0.276s
With this patch, with IPv4 intervals:
baseline rbtree (match on first field only): 15254954pps
Without this patch:
baseline rbtree (match on first field only): 10256119pps
This provides a ~50% improvement in matching intervals from packet path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: 782f268812 ("netfilter: nft_set_rbtree: validate element belonging to interval")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4780ec142c ]
Userspace provides an optimized representation in case intervals are
adjacent, where the end element is omitted.
The existing partial overlap detection logic skips anonymous set checks
on start elements for this reason.
However, it is possible to add intervals that overlap to this anonymous
where two start elements with the same, eg. A-B, A-C where C < B.
start end
A B
start end
A C
Restore the check on overlapping start elements to report an overlap.
Fixes: c9e6978e27 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f9203f41a ]
Userspace adds a non-matching null element to the kernel for historical
reasons. This null element is added when the set is populated with
elements. Inclusion of this element is conditional, therefore,
userspace needs to dump the set content to check for its presence.
If the NLM_F_CREATE flag is turned on, this becomes an issue because
kernel bogusly reports EEXIST.
Add special case to ignore NLM_F_CREATE in this case, therefore,
re-adding the nul-element never fails.
Fixes: c016c7e45d ("netfilter: nf_tables: honor NLM_F_EXCL flag in set element insertion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e13f27e06 ]
nft_counter_reset() calls u64_stats_add() with a negative value to reset
the counter. This will work on 64bit archs, hence the negative value
added will wrap as a 64bit value which then can wrap the stat counter as
well.
On 32bit archs, the added negative value will wrap as a 32bit value and
_not_ wrapping the stat counter properly. In most cases, this would just
lead to a very large 32bit value being added to the stat counter.
Fix by introducing u64_stats_sub().
Fixes: 4a1d3acd6e ("netfilter: nft_counter: Use u64_stats_t for statistic.")
Signed-off-by: Anders Grahn <anders.grahn@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f635adbe2 ]
tests/shell/testcases/packetpath/set_match_nomatch_hash_fast
fails on big endian with:
Error: Could not process rule: No such file or directory
reset element ip test s { 244.147.90.126 }
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Fatal: Cannot fetch element "244.147.90.126"
... because the wrong bucket is searched, jhash() and jhash1_word are
not interchangeable on big endian.
Fixes: 3b02b0adc2 ("netfilter: nft_set_hash: fix lookups with fixed size hash on big endian")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 207b3ebacb ]
Ulrich reports a regression with nfqueue:
If an application did not set the 'F_GSO' capability flag and a gso
packet with an unconfirmed nf_conn entry is received all packets are
now dropped instead of queued, because the check happens after
skb_gso_segment(). In that case, we did have exclusive ownership
of the skb and its associated conntrack entry. The elevated use
count is due to skb_clone happening via skb_gso_segment().
Move the check so that its peformed vs. the aggregated packet.
Then, annotate the individual segments except the first one so we
can do a 2nd check at reinject time.
For the normal case, where userspace does in-order reinjects, this avoids
packet drops: first reinjected segment continues traversal and confirms
entry, remaining segments observe the confirmed entry.
While at it, simplify nf_ct_drop_unconfirmed(): We only care about
unconfirmed entries with a refcnt > 1, there is no need to special-case
dying entries.
This only happens with UDP. With TCP, the only unconfirmed packet will
be the TCP SYN, those aren't aggregated by GRO.
Next patch adds a udpgro test case to cover this scenario.
Reported-by: Ulrich Weber <ulrich.weber@gmail.com>
Fixes: 7d8dc1c7be ("netfilter: nf_queue: drop packets with cloned unconfirmed conntracks")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e19079adcd ]
The current implementation uses a linear list to find queued packets by
ID when processing verdicts from userspace. With large queue depths and
out-of-order verdicting, this O(n) lookup becomes a significant
bottleneck, causing userspace verdict processing to dominate CPU time.
Replace the linear search with a hash table for O(1) average-case
packet lookup by ID. A global rhashtable spanning all network
namespaces attributes hash bucket memory to kernel but is subject to
fixed upper bound.
Signed-off-by: Scott Mitchell <scott.k.mitch1@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: 207b3ebacb ("netfilter: nfnetlink_queue: do shared-unconfirmed check before segmentation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9efde1e53 ]
llc_shdlc_deinit() purges SHDLC skb queues and frees the llc_shdlc
structure while its timers and state machine work may still be active.
Timer callbacks can schedule sm_work, and sm_work accesses SHDLC state
and the skb queues. If teardown happens in parallel with a queued/running
work item, it can lead to UAF and other shutdown races.
Stop all SHDLC timers and cancel sm_work synchronously before purging the
queues and freeing the context.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4a61cd6687 ("NFC: Add an shdlc llc module to llc core")
Signed-off-by: Votokina Victoria <Victoria.Votokina@kaspersky.com>
Link: https://patch.msgid.link/20260203113158.2008723-1-Victoria.Votokina@kaspersky.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c89477ad79 ]
Yizhou Zhao reported that simply having one RAW socket on protocol
IPPROTO_RAW (255) was dangerous.
socket(AF_INET, SOCK_RAW, 255);
A malicious incoming ICMP packet can set the protocol field to 255
and match this socket, leading to FNHE cache changes.
inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST")
pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner
"man 7 raw" states:
A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able
to send any IP protocol that is specified in the passed header.
Receiving of all IP protocols via IPPROTO_RAW is not possible
using raw sockets.
Make sure we drop these malicious packets.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Link: https://lore.kernel.org/netdev/20251109134600.292125-1-zhaoyz24@mails.tsinghua.edu.cn/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260203192509.682208-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48dec8d88a ]
bond_update_speed_duplex() first set speed/duplex to unknown and
then asks slave driver for current speed/duplex. Since getting
speed/duplex might take longer there is a race, where this false state
is visible by /proc/net/bonding. With commit 691b2bf149 ("bonding:
update port speed when getting bond speed") this race gets more visible,
if user space is calling ethtool on a regular base.
Fix this by only setting speed/duplex to unknown, if link speed is
really unknown/unusable.
Fixes: 98f41f694f ("bonding:update speed/duplex for NETDEV_CHANGE")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260203141153.51581-1-tbogendoerfer@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d2d574309 ]
During a kexec reboot the hardware is not power-cycled, so AF state from
the old kernel can persist into the new kernel. When AF and PF drivers
are built as modules, the PF driver may probe before AF reinitializes
the hardware.
The PF driver treats the RVUM block revision as an indication that AF
initialization is complete. If this value is left uncleared at shutdown,
PF may incorrectly assume AF is ready and access stale hardware state,
leading to a crash.
Clear the RVUM block revision during AF shutdown to avoid PF
mis-detecting AF readiness after kexec.
Fixes: 54494aa5d1 ("octeontx2-af: Add Marvell OcteonTX2 RVU AF driver")
Signed-off-by: Anshumali Gaur <agaur@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260203050701.2616685-1-agaur@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70274765fe ]
MPTCP initialize the receive buffer stamp in mptcp_rcv_space_init(),
using the provided subflow stamp. Such helper is invoked in several
places; for passive sockets, space init happened at clone time.
In such scenario, MPTCP ends-up accesses the subflow stamp before
its initialization, leading to quite randomic timing for the first
receive buffer auto-tune event, as the timestamp for newly created
subflow is not refreshed there.
Fix the issue moving the stamp initialization out of the mentioned helper,
at the data transfer start, and always using a fresh timestamp.
Fixes: 013e3179db ("mptcp: fix rcv space initialization")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-2-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b32939350 ]
MPTCP-level OoOs are physiological when multiple subflows are active
concurrently and will not cause retransmissions nor are caused by
drops.
Accounting for them in mptcp_rcvbuf_grow() causes the rcvbuf slowly
drifting towards tcp_rmem[2].
Remove such accounting. Note that subflows will still account for TCP-level
OoO when the MPTCP-level rcvbuf is propagated.
This also closes a subtle and very unlikely race condition with rcvspace
init; active sockets with user-space holding the msk-level socket lock,
could complete such initialization in the receive callback, after that the
first OoO data reaches the rcvbuf and potentially triggering a divide by
zero Oops.
Fixes: e118cdc34d ("mptcp: rcvbuf auto-tuning improvement")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-1-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d289cb7fce ]
This function first duplicates p1 and p2 into new, and then checks whether
the duplication succeeds. However, if the duplication fails (e.g.,
kzalloc() returns NULL in __of_prop_dup()), new will be NULL but is still
dereferenced in __of_prop_free(). To ensure that the unit test continues to
run even when duplication fails, add a NULL check before calling
__of_prop_free().
Fixes: 1c5e3d9bf3 ("of: Add a helper to free property struct")
Signed-off-by: Tuo Li <islituo@gmail.com>
Link: https://patch.msgid.link/20260105071438.156186-1-islituo@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5ff6b8371 ]
According to Sections 3.1.2 and 3.1.3 of AccECN spec (RFC9768).
In Section 3.1.2, it says an AccECN implementation has no need to
recognize or support the Server response labelled 'Nonce' or ECN-nonce
feedback more generally, as RFC 3540 has been reclassified as Historic.
AccECN is compatible with alternative ECN feedback integrity approaches
to the nonce. The SYN/ACK labelled 'Nonce' with (AE,CWR,ECE) = (1,0,1)
is reserved for future use. A TCP Client (A) that receives such a SYN/ACK
follows the procedure for forward compatibility given in Section 3.1.3.
Then in Section 3.1.3, it says if a TCP Client has sent a SYN requesting
AccECN feedback with (AE,CWR,ECE) = (1,1,1) then receives a SYN/ACK with
the currently reserved combination (AE,CWR,ECE) = (1,0,1) but it does not
have logic specific to such a combination, the Client MUST enable AccECN
mode as if the SYN/ACK onfirmed that the Server supported AccECN and as
if it fed back that the IP-ECN field on the SYN had arrived unchanged.
Fixes: 3cae34274c ("tcp: accecn: AccECN negotiation").
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-7-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e68c28f22f ]
When AccECN is not successfully negociated for a TCP flow, it defaults
fallback to classic ECN (RFC3168). However, L4S service will fallback
to non-ECN.
This patch enables congestion control module to control whether it
should not fallback to classic ECN after unsuccessful AccECN negotiation.
A new CA module flag (TCP_CONG_NO_FALLBACK_RFC3168) identifies this
behavior expected by the CA.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-6-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: c5ff6b8371 ("tcp: accecn: handle unexpected AccECN negotiation feedback")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 100f946b8d ]
Two flags for congestion control (CC) module are added in this patch
related to AccECN negotiation. First, a new flag (TCP_CONG_NEEDS_ACCECN)
defines that the CC expects to negotiate AccECN functionality using the
ECE, CWR and AE flags in the TCP header.
Second, during ECN negotiation, ECT(0) in the IP header is used. This
patch enables CC to control whether ECT(0) or ECT(1) should be used on
a per-segment basis. A new flag (TCP_CONG_ECT_1_NEGOTIATION) defines the
expected ECT value in the IP header by the CA when not-yet initialized
for the connection.
The detailed AccECN negotiaotn can be found in IETF RFC9768.
Co-developed-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-5-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: c5ff6b8371 ("tcp: accecn: handle unexpected AccECN negotiation feedback")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7833570dae ]
A recent change for the range check started triggering a clang warning:
fs/jfs/jfs_dtree.c:2906:31: error: result of comparison of constant 128 with expression of type 's8' (aka 'signed char') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
2906 | if (stbl[i] < 0 || stbl[i] >= DTPAGEMAXSLOT) {
| ~~~~~~~ ^ ~~~~~~~~~~~~~
fs/jfs/jfs_dtree.c:3111:30: error: result of comparison of constant 128 with expression of type 's8' (aka 'signed char') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
3111 | if (stbl[0] < 0 || stbl[0] >= DTPAGEMAXSLOT) {
| ~~~~~~~ ^ ~~~~~~~~~~~~~
Both the old and the new check were useless, but the previous version
apparently did not lead to the warning.
Remove the extraneous range check for simplicity.
Fixes: cafc667982 ("jfs: replace hardcoded magic number with DTPAGEMAXSLOT constant")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0895a000e4 ]
The user.* sysctls implement the ctl_table_root::permissions hook and they
override the file access mode based on the CAP_SYS_RESOURCE capability (at
most rwx if capable, at most r-- if not). The capability is being checked
unconditionally, so if an LSM denies the capability, an audit record may
be logged even when access is in fact granted.
Given the logic in the set_permissions() function in kernel/ucount.c and
the unfortunate way the permission checking is implemented, it doesn't
seem viable to avoid false positive denials by deferring the capability
check. Thus, do the same as in net_ctl_permissions() (net/sysctl_net.c) -
switch from ns_capable() to ns_capable_noaudit(), so that the check never
logs an audit record.
Link: https://lkml.kernel.org/r/20260122140745.239428-1-omosnace@redhat.com
Fixes: dbec28460a ("userns: Add per user namespace sysctls.")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0715881360 ]
The IPC sysctls implement the ctl_table_root::permissions hook and
they override the file access mode based on the CAP_CHECKPOINT_RESTORE
capability, which is being checked regardless of whether any access is
actually denied or not, so if an LSM denies the capability, an audit
record may be logged even when access is in fact granted.
It wouldn't be viable to restructure the sysctl permission logic to only
check the capability when the access would be actually denied if it's
not granted. Thus, do the same as in net_ctl_permissions()
(net/sysctl_net.c) - switch from ns_capable() to ns_capable_noaudit(),
so that the check never emits an audit record.
Fixes: 0889f44e28 ("ipc: Check permissions for checkpoint_restart sysctls at open time")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Serge Hallyn <sergeh@kernel.org>
Stable-dep-of: 8924336531 ("ipc: don't audit capability check in ipc_permissions()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bce1dabd31 ]
Commit 5bbc2b785e ("selftests/mm: fix FORCE_READ to read input value
correctly") modified FORCE_READ() to take a value instead of a pointer.
It also changed most of the call sites accordingly, but missed many of
them in cow.c. In those cases, we ended up with the pointer itself being
read, not the memory it points to.
No failure occurred as a result, so it looks like the tests work just fine
without faulting in. However, the huge_zeropage tests explicitly check
that pages are populated, so those became skipped.
Convert all the remaining FORCE_READ() to fault in the mapped page, as was
originally intended. This allows the huge_zeropage tests to run again (3
tests in total).
Link: https://lkml.kernel.org/r/20260122170224.4056513-5-kevin.brodsky@arm.com
Fixes: 5bbc2b785e ("selftests/mm: fix FORCE_READ to read input value correctly")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Usama Anjum <Usama.Anjum@arm.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9abf79c8d7 ]
Previously program_hpx_type2() applied PCIe settings unconditionally,
which could incorrectly change bits like Extended Tag Field Enable and
Enable Relaxed Ordering.
When _HPX was added to ACPI r3.0, the intent of the PCIe Setting
Record (Type 2) in sec 6.2.7.3 was to configure AER registers when the
OS does not own the AER Capability:
The PCI Express setting record contains ... [the AER] Uncorrectable
Error Mask, Uncorrectable Error Severity, Correctable Error Mask
... to be used when configuring registers in the Advanced Error
Reporting Extended Capability Structure ...
OSPM [1] will only evaluate _HPX with Setting Record – Type 2 if
OSPM is not controlling the PCI Express Advanced Error Reporting
capability.
ACPI r3.0b, sec 6.2.7.3, added more AER registers, including registers
in the PCIe Capability with AER-related bits, and the restriction that
the OS use this only when it owns PCIe native hotplug:
... when configuring PCI Express registers in the Advanced Error
Reporting Extended Capability Structure *or PCI Express Capability
Structure* ...
An OS that has assumed ownership of native hot plug but does not
... have ownership of the AER register set must use ... the Type 2
record to program the AER registers ...
However, since the Type 2 record also includes register bits that
have functions other than AER, the OS must ignore values ... that
are not applicable.
Restrict program_hpx_type2() to only the intended purpose:
- Apply settings only when OS owns PCIe native hotplug but not AER,
- Only touch the AER-related bits (Error Reporting Enables) in Device
Control
- Don't touch Link Control at all, since nothing there seems AER-related,
but log _HPX settings for debugging purposes
Note that Read Completion Boundary is now configured elsewhere, since it is
unrelated to _HPX.
[1] Operating System-directed configuration and Power Management
Fixes: 40abb96c51 ("[PATCH] pciehp: Fix programming hotplug parameters")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260129175237.727059-3-haakon.bugge@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a6845aaa6 ]
Commit e42010d820 ("PCI: Set Read Completion Boundary to 128 iff Root
Port supports it (_HPX)") worked around a bogus _HPX type 2 record, which
caused program_hpx_type2() to set the RCB in an endpoint even though the
Root Port did not have the RCB bit set.
e42010d820 fixed that by setting the RCB in the endpoint only when it was
set in the Root Port.
In retrospect, program_hpx_type2() is intended for AER-related settings,
and the RCB should be configured elsewhere so it doesn't depend on the
presence or contents of an _HPX record.
Explicitly program the RCB from pci_configure_device() so it matches the
Root Port's RCB. The Root Port may not be visible to virtualized guests;
in that case, leave RCB alone.
Fixes: e42010d820 ("PCI: Set Read Completion Boundary to 128 iff Root Port supports it (_HPX)")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260129175237.727059-2-haakon.bugge@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c1ba9c2ad ]
When an arvif is initialized in non-AP STA mode but MLO connection
preparation fails before the arvif is created
(arvif->is_created remains false), the error path attempts to delete all
links. However, link deletion only executes when arvif->is_created is true.
As a result, ahvif retains a stale entry of arvif that is initialized but
not created.
When a new arvif is initialized with the same link id, this stale mapping
triggers the following WARN_ON.
WARNING: drivers/net/wireless/ath/ath12k/mac.c:4271 at ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k], CPU#3: wpa_supplicant/275
Call trace:
ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k] (P)
drv_change_vif_links+0xbc/0x1a4 [mac80211]
ieee80211_vif_update_links+0x54c/0x6a0 [mac80211]
ieee80211_vif_set_links+0x40/0x70 [mac80211]
ieee80211_prep_connection+0x84/0x450 [mac80211]
ieee80211_mgd_auth+0x200/0x480 [mac80211]
ieee80211_auth+0x14/0x20 [mac80211]
cfg80211_mlme_auth+0x90/0xf0 [cfg80211]
nl80211_authenticate+0x32c/0x380 [cfg80211]
genl_family_rcv_msg_doit+0xc8/0x134
Fix this issue by unassigning the link vif and clearing ahvif->links_map
if arvif is only initialized but not created.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: 81e4be3054 ("wifi: ath12k: handle link removal in change_vif_links()")
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260127033400.1721220-1-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4763898bb ]
Currently, print_array_to_buf_index() decrements index unconditionally.
This may lead to invalid buffer access when array_len is zero.
Fix this by decrementing index only when array_len is non-zero.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: adf6df963c ("wifi: ath12k: Add support to parse requested stats_type")
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123071253.2202644-2-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c386a2b106 ]
For M.2 WLAN chips, there is no suitable DTS node to specify the
firmware-name property. In addition, assigning firmware for the
M.2 PCIe interface causes chips that do not use usecase specific
firmware to fail. Therefore, abandoning the approach of specifying
firmware in DTS. As an alternative, propose a static lookup table
mapping device compatible to firmware names. Currently, only WCN6855
HW2.1 requires this.
However, support for the firmware-name property is retained to keep
the ABI backwards compatible.
For details on usecase specific firmware, see:
https://lore.kernel.org/all/20250522013444.1301330-3-miaoqing.pan@oss.qualcomm.com/.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Fixes: edbbc647c4 ("wifi: ath11k: support usercase-specific firmware overrides")
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260121095055.3683957-2-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e55ac34808 ]
ath10k_sdio_fw_crashed_dump() calls ath10k_coredump_new() which requires
ar->dump_mutex to be held, as indicated by lockdep_assert_held() in that
function. However, the SDIO implementation does not acquire this lock,
unlike the PCI and SNOC implementations which properly hold the mutex.
Additionally, ar->stats.fw_crash_counter is documented as protected by
ar->data_lock in core.h, but the SDIO implementation modifies it without
holding this spinlock.
Add the missing mutex_lock()/mutex_unlock() around the coredump
operations, and add spin_lock_bh()/spin_unlock_bh() around the
fw_crash_counter increment, following the pattern used in
ath10k_pci_fw_dump_work() and ath10k_snoc_fw_crashed_dump().
Fixes: 3c45f21af8 ("ath10k: sdio: add firmware coredump support")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123045822.2221549-1-n7l8m4@u.northwestern.edu
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7245901de ]
of_pci_bus_find_domain_nr() allows its parent parameter to be NULL but
of_pci_bus_release_domain_nr() (that undoes its effect) doesn't -- that
means it's going to blow up while calling of_get_pci_domain_nr() if the
parent parameter indeed happens to be NULL. Add the missing NULL check.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: c14f7ccc9f ("PCI: Assign PCI domain IDs by ida_alloc()")
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260127203944.28588-1-s.shtylyov@auroraos.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 838eb96876 ]
tcp_tx_timestamp() is only called at the end of tcp_sendmsg_locked()
before the final tcp_push().
By the time it is called, it is possible all the copied data
has been sent already (transmit queue is empty).
If this is the case, use the last skb in the rtx queue.
Fixes: 75c119afe1 ("tcp: implement rb-tree based retransmit queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20260127123828.4098577-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f909e3ee3e ]
calculate_memsize() applies lower bound to the resource size before
aligning the resource size making it impossible to shrink bridge window
resources. I've not found any justification for this lower bound and
nothing indicated it was to work around some HW issue.
Prior to the commit 3baeae3603 ("PCI: Use pci_release_resource() instead
of release_resource()"), releasing a bridge window during BAR resize
resulted in clearing start and end address of the resource. Clearing
addresses destroys the resource size as a side-effect, therefore nullifying
the effect of the old size lower bound.
After the commit 3baeae3603 ("PCI: Use pci_release_resource() instead of
release_resource()"), BAR resize uses the aligned old size, which results
in exceeding what fits into the parent window in some cases:
xe 0030:03:00.0: [drm] Attempting to resize bar from 256MiB -> 16384MiB
xe 0030:03:00.0: BAR 0 [mem 0x620c000000000-0x620c000ffffff 64bit]: releasing
xe 0030:03:00.0: BAR 2 [mem 0x6200000000000-0x620000fffffff 64bit pref]: releasing
pci 0030:02:01.0: bridge window [mem 0x6200000000000-0x620001fffffff 64bit pref]: releasing
pci 0030:01:00.0: bridge window [mem 0x6200000000000-0x6203fbff0ffff 64bit pref]: releasing
pci 0030:00:00.0: bridge window [mem 0x6200000000000-0x6203fbff0ffff 64bit pref]: was not released (still contains assigned resources)
pci 0030:00:00.0: Assigned bridge window [mem 0x6200000000000-0x6203fbff0ffff 64bit pref] to [bus 01-04] free space at [mem 0x6200400000000-0x62007ffffffff 64bit pref]
pci 0030:00:00.0: Assigned bridge window [mem 0x6200000000000-0x6203fbff0ffff 64bit pref] to [bus 01-04] cannot fit 0x4000000000 required for 0030:01:00.0 bridging to [bus 02-04]
The old size of 0x6200000000000-0x6203fbff0ffff resource was used as the
lower bound which results in 0x4000000000 size request due to alignment.
That exceeds what can fit into the parent window.
Since the lower bound never even was enforced fully because the resource
addresses were cleared when the bridge window is released, remove the
old_size lower bound entirely and trust the calculated bridge window size
is enough.
This same problem may occur on io window side but seems less likely to
cause issues due to general difference in alignment. Removing the lower
bound may have other unforeseen consequences in case of io window so it's
better to leave it as -next material if no problem is reported related to
io window sizing (BAR resize shouldn't touch io windows anyway).
Fixes: 3baeae3603 ("PCI: Use pci_release_resource() instead of release_resource()")
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/r/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251219174036.16738-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3958bf16e2 ]
New way to calculate the bridge window head alignment produces tight-fit,
that is, it does not leave any gaps between the resources. Similarly,
relaxed tail alignment does not leave extra tail room.
Start to use bridge window calculation that does not over-estimate the size
of the required window.
pbus_upstream_space_available() can be removed.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Malte Schröder <malte+lkml@tnxip.de>
Link: https://patch.msgid.link/20251219174036.16738-4-ilpo.jarvinen@linux.intel.com
Stable-dep-of: f909e3ee3e ("PCI: Remove old_size limit from bridge window sizing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc75c8e507 ]
The calculation of bridge window head alignment is done by
calculate_mem_align() [*]. With the default bridge window alignment, it
is used for both head and tail alignment.
The selected head alignment does not always result in tight-fitting
resources (gap at d4f00000-d4ffffff):
d4800000-dbffffff : PCI Bus 0000:06
d4800000-d48fffff : PCI Bus 0000:07
d4800000-d4803fff : 0000:07:00.0
d4800000-d4803fff : nvme
d4900000-d49fffff : PCI Bus 0000:0a
d4900000-d490ffff : 0000:0a:00.0
d4900000-d490ffff : r8169
d4910000-d4913fff : 0000:0a:00.0
d4a00000-d4cfffff : PCI Bus 0000:0b
d4a00000-d4bfffff : 0000:0b:00.0
d4a00000-d4bfffff : 0000:0b:00.0
d4c00000-d4c07fff : 0000:0b:00.0
d4d00000-d4dfffff : PCI Bus 0000:15
d4d00000-d4d07fff : 0000:15:00.0
d4d00000-d4d07fff : xhci-hcd
d4e00000-d4efffff : PCI Bus 0000:16
d4e00000-d4e7ffff : 0000:16:00.0
d4e80000-d4e803ff : 0000:16:00.0
d4e80000-d4e803ff : ahci
d5000000-dbffffff : PCI Bus 0000:0c
This has not caused problems (for years) with the default bridge window
tail alignment that grossly over-estimates the required tail alignment
leaving more tail room than necessary. With the introduction of relaxed
tail alignment that leaves no extra tail room whatsoever, any gaps will
immediately turn into assignment failures.
Introduce head alignment calculation that ensures no gaps are left and
apply the new approach when using relaxed alignment. We may want to
consider using it for the normal alignment eventually, but as the first
step, solve only the problem with the relaxed tail alignment.
([*] I don't understand the algorithm in calculate_mem_align().)
Link: https://git.kernel.org/history/history/c/5d0a8965aea9 ("[PATCH] 2.5.14: New PCI allocation code (alpha, arm, parisc) [2/2]")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220775
Reported-by: Malte Schröder <malte+lkml@tnxip.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Malte Schröder <malte+lkml@tnxip.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251219174036.16738-3-ilpo.jarvinen@linux.intel.com
Stable-dep-of: f909e3ee3e ("PCI: Remove old_size limit from bridge window sizing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cafcb8813 ]
Corrupted FAT images can leave a directory inode with an incorrect
i_nlink (e.g. 2 even though subdirectories exist). rmdir then
unconditionally calls drop_nlink(dir) and can drive i_nlink to 0,
triggering the WARN_ON in drop_nlink().
Add a sanity check in vfat_rmdir() and msdos_rmdir(): only drop the
parent link count when it is at least 3, otherwise report a filesystem
error.
Link: https://lkml.kernel.org/r/20260101111148.1437-1-zhiyuzhang999@gmail.com
Fixes: 9a53c3a783 ("[PATCH] r/o bind mounts: unlink: monitor i_nlink")
Signed-off-by: Zhiyu Zhang <zhiyuzhang999@gmail.com>
Reported-by: Zhiyu Zhang <zhiyuzhang999@gmail.com>
Closes: https://lore.kernel.org/linux-fsdevel/aVN06OKsKxZe6-Kv@casper.infradead.org/T/#t
Tested-by: Zhiyu Zhang <zhiyuzhang999@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 105ddfb2d2 ]
The Task::group_leader() method currently allows you to access the
group_leader() of any task, for example one you hold a refcount to. But
this is not safe in general since the group leader could change when a
task exits. See for example commit a15f37a401 ("kernel/sys.c: fix the
racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths").
All existing users of Task::group_leader() call this method on current,
which is guaranteed running, so there's not an actual issue in Rust code
today. But to prevent code in the future from making this mistake,
restrict Task::group_leader() so that it can only be called on current.
There are some other cases where accessing task->group_leader is okay.
For example it can be safe if you hold tasklist_lock or rcu_read_lock().
However, only supporting current->group_leader is sufficient for all
in-tree Rust users of group_leader right now. Safe Rust functionality for
accessing it under rcu or while holding tasklist_lock may be added in the
future if required by any future Rust module.
This patch is a bugfix in that it prevents users of this API from writing
incorrect code. It doesn't change behavior of correct code.
Link: https://lkml.kernel.org/r/20260107-task-group-leader-v2-1-8fbf816f2a2f@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Fixes: 313c4281bc ("rust: add basic `Task`")
Reported-by: Oleg Nesterov <oleg@redhat.com>
Closes: https://lore.kernel.org/all/aTLnV-5jlgfk1aRK@redhat.com/
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Benno Lossin <lossin@kernel.org>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: FUJITA Tomonori <fujita.tomonori@gmail.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Panagiotis Foliadis <pfoliadis@posteo.net>
Cc: Shankari Anand <shankari.ak0208@gmail.com>
Cc: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1921044eeb ]
Commit ae5b350085 ("kstrtox: add support for enabled and disabled in
kstrtobool()") added support for 'e'/'E' (enabled) and 'd'/'D' (disabled)
inputs, but did not update the docstring accordingly.
Update the docstring to include 'Ee' (for true) and 'Dd' (for false) in
the list of accepted first characters.
Link: https://lkml.kernel.org/r/20251227092229.57330-1-chaitanyamishra.ai@gmail.com
Fixes: ae5b350085 ("kstrtox: add support for enabled and disabled in kstrtobool()")
Signed-off-by: Chaitanya Mishra <chaitanyamishra.ai@gmail.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9c206cdc4 ]
During v4 request compound arg decoding, some ops (e.g. SETATTR)
can trigger idmap lookup upcalls. When those upcall responses get
delayed beyond the allowed time limit, cache_check() will mark the
request for deferral and cause it to be dropped.
This prevents nfs4svc_encode_compoundres from being executed, and
thus the session slot flag NFSD4_SLOT_INUSE never gets cleared.
Subsequent client requests will fail with NFSERR_JUKEBOX, given
that the slot will be marked as in-use, making the SEQUENCE op
fail.
Fix this by making sure that the RQ_USEDEFERRAL flag is always
clear during nfs4svc_decode_compoundargs(), since no v4 request
should ever be deferred.
Fixes: 2f425878b6 ("nfsd: don't use the deferral service, return NFS4ERR_DELAY")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb1f3b55ac ]
The client-side source code template mistakenly includes the
nlm4.h header file, which is specific to the NLM protocol and
should not be present in the generic template that generates
client stubs for all XDR-based protocols.
Fixes: 903a7d37d9 ("xdrgen: Update the files included in client-side source code")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27b0fcae8f ]
The xdrgen decoders for strings and opaque data had an
optimization that skipped calling xdr_inline_decode() when the
item length was zero. This left the data pointer uninitialized,
which could lead to unpredictable behavior when callers access
it.
Remove the zero-length check and always call xdr_inline_decode().
When passed a length of zero, xdr_inline_decode() returns the
current buffer position, which is valid and matches the behavior
of hand-coded XDR decoders throughout the kernel.
Fixes: 4b132aacb0 ("tools: Add xdrgen")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ac903d1bf ]
A documenting comment in include/uapi/linux/nfs.h claims incorrectly
that NFSv2 defines NFSERR_INVAL. There is no such definition in either
RFC 1094 or https://pubs.opengroup.org/onlinepubs/9629799/chap7.htm
NFS3ERR_INVAL is introduced in RFC 1813.
NFSD returns NFSERR_INVAL for PROC_GETACL, which has no
specification (yet).
However, nfsd_map_status() maps nfserr_symlink and nfserr_wrong_type
to nfserr_inval, which does not align with RFC 1094. This logic was
introduced only recently by commit 438f81e0e9 ("nfsd: move error
choice for incorrect object types to version-specific code."). Given
that we have no INVAL or SERVERFAULT status in NFSv2, probably the
only choice is NFSERR_IO.
Fixes: 438f81e0e9 ("nfsd: move error choice for incorrect object types to version-specific code.")
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf0fe9ad3d ]
The program templates for decoder/argument.j2 and encoder/result.j2
unconditionally add 'struct' prefix to all types. This is incorrect
when an RPC protocol specification lists a typedef'd basic type or
an enum as a procedure argument or result (e.g., NFSv2's fhandle or
stat), resulting in compiler errors when building generated C code.
Fixes: 4b132aacb0 ("tools: Add xdrgen")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2df8b310bc ]
The origin bio carries blk-cgroup information which could be set from
foreground(task_css(css) - wbc->wb->blkcg_css), so the blkcg won't
control buffer io since commit ca522482e3 ("dm: pass NULL bdev to
bio_alloc_clone"). The synchronous io is still under control by blkcg,
because 'bio->bi_blkg' is set by io submitting task which has been added
into 'cgroup.procs'.
Fix it by using bio_clone_blkg_association when submitting a cloned bio.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220985
Fixes: ca522482e3 ("dm: pass NULL bdev to bio_alloc_clone")
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1e4f1dccb ]
When tearing down a context entry, the current implementation zeros the
entire 128-bit entry using multiple 64-bit writes. This creates a window
where the hardware can fetch a "torn" entry — where some fields are
already zeroed while the 'Present' bit is still set — leading to
unpredictable behavior or spurious faults.
While x86 provides strong write ordering, the compiler may reorder writes
to the two 64-bit halves of the context entry. Even without compiler
reordering, the hardware fetch is not guaranteed to be atomic with
respect to multiple CPU writes.
Align with the "Guidance to Software for Invalidations" in the VT-d spec
(Section 6.5.3.3) by implementing the recommended ownership handshake:
1. Clear only the 'Present' (P) bit of the context entry first to
signal the transition of ownership from hardware to software.
2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU.
3. Perform the required cache and context-cache invalidation to ensure
hardware no longer has cached references to the entry.
4. Fully zero out the entry only after the invalidation is complete.
Also, add a dma_wmb() to context_set_present() to ensure the entry
is fully initialized before the 'Present' bit becomes visible.
Fixes: ba39592764 ("Intel IOMMU: Intel IOMMU driver")
Reported-by: Dmytro Maluka <dmaluka@chromium.org>
Closes: https://lore.kernel.org/all/aTG7gc7I5wExai3S@google.com/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Dmytro Maluka <dmaluka@chromium.org>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260120061816.2132558-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75ed00055c ]
The Intel VT-d Scalable Mode PASID table entry consists of 512 bits (64
bytes). When tearing down an entry, the current implementation zeros the
entire 64-byte structure immediately using multiple 64-bit writes.
Since the IOMMU hardware may fetch these 64 bytes using multiple
internal transactions (e.g., four 128-bit bursts), updating or zeroing
the entire entry while it is active (P=1) risks a "torn" read. If a
hardware fetch occurs simultaneously with the CPU zeroing the entry, the
hardware could observe an inconsistent state, leading to unpredictable
behavior or spurious faults.
Follow the "Guidance to Software for Invalidations" in the VT-d spec
(Section 6.5.3.3) by implementing the recommended ownership handshake:
1. Clear only the 'Present' (P) bit of the PASID entry.
2. Use a dma_wmb() to ensure the cleared bit is visible to hardware
before proceeding.
3. Execute the required invalidation sequence (PASID cache, IOTLB, and
Device-TLB flush) to ensure the hardware has released all cached
references.
4. Only after the flushes are complete, zero out the remaining fields
of the PASID entry.
Also, add a dma_wmb() in pasid_set_present() to ensure that all other
fields of the PASID entry are visible to the hardware before the Present
bit is set.
Fixes: 0bbeb01a4f ("iommu/vt-d: Manage scalalble mode PASID tables")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Dmytro Maluka <dmaluka@chromium.org>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260120061816.2132558-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22d169bdd2 ]
When writing the address of a freshly allocated zero-initialized PASID
table to a PASID directory entry, do that after the CPU cache flush for
this PASID table, not before it, to avoid the time window when this
PASID table may be already used by non-coherent IOMMU hardware while
its contents in RAM is still some random old data, not zero-initialized.
Fixes: 194b3348bd ("iommu/vt-d: Fix PASID directory pointer coherency")
Signed-off-by: Dmytro Maluka <dmaluka@chromium.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20251221123508.37495-1-dmaluka@chromium.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6070a44051 ]
In __print_txpwr_map(), memory is allocated to bufp via vzalloc().
If max_valid_addr is 0, the function returns -EOPNOTSUPP immediately
without freeing bufp, leading to a memory leak.
Since the validation of max_valid_addr does not depend on the allocated
memory, fix this by moving the vzalloc() call after the check.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 036042e157 ("wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips")
Suggested-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260116130834.1413924-1-zilin@seu.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 959ac08a2c ]
Per PCIe r7.0, sec 2.2.6.2.1 and 7.5.3.4, a Requester may not use 8-bit Tags
unless its Extended Tag Field Enable is set, but all Receivers/Completers
must handle 8-bit Tags correctly regardless of their Extended Tag Field
Enable.
Some devices do not handle 8-bit Tags as Completers, so add a quirk for
them. If we find such a device, we disable Extended Tags for the entire
hierarchy to make peer-to-peer DMA possible.
The 3ware 9650SA seems to have issues with handling 8-bit tags. Mark it as
broken.
This fixes PCI Parity Errors like :
3w-9xxx: scsi0: ERROR: (0x06:0x000C): PCI Parity Error: clearing.
3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing.
3w-9xxx: scsi0: ERROR: (0x06:0x000E): Controller Queue Error: clearing.
3w-9xxx: scsi0: ERROR: (0x06:0x0010): Microcontroller Error: clearing.
Fixes: 60db3a4d8c ("PCI: Enable PCIe Extended Tags if supported")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=202425
Signed-off-by: Jörg Wedekind <joerg@wedekind.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260119143114.21948-1-joerg@wedekind.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8a1e7eaa1 ]
__sprint_symbol() might access an invalid pointer when
kallsyms_lookup_buildid() returns a symbol found by
ftrace_mod_address_lookup().
The ftrace lookup function must set both @modname and @modbuildid the same
way as module_address_lookup().
Link: https://lkml.kernel.org/r/20251128135920.217303-7-pmladek@suse.com
Fixes: 9294523e37 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acfdbb4ab2 ]
Add a helper function for reading the optional "build_id" member of struct
module. It is going to be used also in ftrace_mod_address_lookup().
Use "#ifdef" instead of "#if IS_ENABLED()" to match the declaration of the
optional field in struct module.
Link: https://lkml.kernel.org/r/20251128135920.217303-4-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: e8a1e7eaa1 ("kallsyms/ftrace: set module buildid in ftrace_mod_address_lookup()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd6735896d ]
bpf_address_lookup() has been used only in kallsyms_lookup_buildid(). It
was supposed to set @modname and @modbuildid when the symbol was in a
module.
But it always just cleared @modname because BPF symbols were never in a
module. And it did not clear @modbuildid because the pointer was not
passed.
The wrapper is no longer needed. Both @modname and @modbuildid are now
always initialized to NULL in kallsyms_lookup_buildid().
Remove the wrapper and rename __bpf_address_lookup() to
bpf_address_lookup() because this variant is used everywhere.
[akpm@linux-foundation.org: fix loongarch]
Link: https://lkml.kernel.org/r/20251128135920.217303-6-pmladek@suse.com
Fixes: 9294523e37 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
