Takashi Iwai <tiwai@suse.de> says:
here is a revised series of trivial patches to use the auto-cleanup
(via __free(firmware)) for firmware management.
Now compile warnings due to the mixture with goto have been addressed
for rt1320-sdw and wm2000 drivers. Others remain identical, just took
a few review Acks.
Link: https://patch.msgid.link/20260806140006.1412298-1-tiwai@suse.de
Simplify the code to manage the firmware loading with __free(firmware)
and __free(kfree) auto-cleanups for the firmware data and the temporary
string or array.
Only the code refactoring, no functional changes.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-32-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Maciej Strozek <mstrozek@opensource.cirrus.com>
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-31-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-30-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Cc: Srinivas Kandagatla <srini@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-29-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Cc: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-28-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Cc: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-27-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Cc: Shengjiu Wang <shengjiu.wang@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-26-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-25-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-24-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-23-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Cc: Shenghao Ding <shenghao-ding@ti.com>
Cc: Kevin Lu <kevin-lu@ti.com>
Cc: Baojun Xu <baojun.xu@ti.com>
Cc: Sen Wang <sen@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-22-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-21-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Cc: Shenghao Ding <shenghao-ding@ti.com>
Cc: Kevin Lu <kevin-lu@ti.com>
Cc: Baojun Xu <baojun.xu@ti.com>
Cc: Sen Wang <sen@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-20-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Cc: Kiseok Jo <kiseok.jo@irondevice.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-19-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Nuno Sá <nuno.sa@analog.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-18-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup, as well as the firmware file name being released with
__free(kfree).
Only the code refactoring, no functional changes.
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-17-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-16-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-15-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-14-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-13-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Since the firmware release is cleaned up automatically, we can convert
the mutex call with guard() gracefully, too.
Only the code refactoring, no functional changes.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-12-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-11-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-10-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Cc: Nick Li <nick.li@foursemi.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-8-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-6-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-5-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Continuous high-amplitude noise could occur in the DA7213 microphone
capture path after a Bluetooth out-of-range/reset event followed by
reconnection. The noise was present in both the raw ALSA capture and
PipeWire input, confirming that it originated before Bluetooth
encoding.
The codec already obtains and enables MCLK through its DT clock and
bias-level handling. However, the machine driver did not explicitly
configure the codec sysclk during hw_params(). Enable
codec_sysclk_set for QCS615 so that the DA7213 clock source and rate
are configured before the codec power-up sequence.
Verified on QCS615 Talos with repeated Bluetooth disconnect and
reconnect cycles. The noise was no longer reproducible.
Signed-off-by: Le Qi <le.qi@oss.qualcomm.com>
Link: https://patch.msgid.link/20260810031032.2001053-1-le.qi@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 48d84310be ("ASoC: fsl_easrc: Use guard() for spin locks")
refactored fsl_easrc_runtime_resume() but accidentally dropped the
early return on the success path. The original code had a skip_load
label followed by "return 0"; that label was removed during cleanup
but the corresponding success return was lost too.
As a result, every successful resume falls through into the
disable_mem_clk error path and calls clk_disable_unprepare() on a
clock that is still in use, leading to an unbalanced clock disable.
Restore the missing "return 0" before the disable_mem_clk error label.
Fixes: 48d84310be ("ASoC: fsl_easrc: Use guard() for spin locks")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260807072202.380021-1-shengjiu.wang@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use .auto_selectable_formats. Let's adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/87bjbeu4uq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use .auto_selectable_formats. Let's adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/87cxvuu4uv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use .auto_selectable_formats. Let's adds it.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87qzkau4wk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
reg_defaults must be sorted by ascending register address, since
regcache_lookup_reg() locates entries in it with bsearch(). When a table is
not sorted, bsearch() cannot find the entries which follow a descending step,
so regcache_reg_needs_sync() falls back to reporting that a sync is needed for
them. Those registers are then written to the device on every regcache_sync()
even when they were never touched.
See commit fd80df352b ("regcache: Add support for sorting defaults arrays")
for the same problem in a different context.
Affected tables:
ml26124_reg 1 of 79 entries unreachable
cx2072x_reg_defaults 75 of 132 entries unreachable
max9860_reg_defaults 1 of 14 entries unreachable
stih407_sas_reg_defaults 1 of 2 entries unreachable
Link: https://patch.msgid.link/20260805122811.13713-1-peter.ujfalusi@linux.intel.com
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
STIH407_AUDIO_DAC_CTRL (0xa8) is listed before
STIH407_AUDIO_GLUE_CTRL (0xa4), which makes the latter unreachable.
regcache_reg_needs_sync() then cannot compare it against its default and
reports that a sync is needed, so it is written to the device on every
regcache_sync() even when it was never touched.
Sort the table by register address.
Fixes: 165a57a3df ("ASoC: sti-sas: clean legacy in sti-sas")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122811.13713-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
MAX9860_PWRMAN (0x10) is listed as the first entry, before
MAX9860_INTEN (0x02), which makes MAX9860_INTEN unreachable.
regcache_reg_needs_sync() then cannot compare it against its default and
reports that a sync is needed, so it is written to the device on every
regcache_sync() even when it was never touched.
Sort the table by register address.
Fixes: 3b2af7f799 ("ASoC: max9860: new driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122811.13713-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
The table is grouped by function rather than by address: for every node
the amplifier gain registers (0x41c0, 0x45c0, ...) are listed before the
power state and stream format registers of the same node (0x4014,
0x4414, ...). This leaves 75 of the 132 entries unreachable.
regcache_reg_needs_sync() then cannot compare them against their default
and reports that a sync is needed, so they are written to the device on
every regcache_sync() even when they were never touched.
Sort the table by register address.
Fixes: a497a43637 ("ASoC: Add support for Conexant CX2072X CODEC")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122811.13713-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
The Mic Select Control register (0xe8) is listed in the analog path
control group, between 0x5a and 0x60, which makes it unreachable.
regcache_reg_needs_sync() then cannot compare it against its default and
reports that a sync is needed, so it is written to the device on every
regcache_sync() even when it was never touched.
Move the entry to the end of the table, where it belongs by address.
Fixes: d808fe9f3e ("ASoC: Add LAPIS Semiconductor ML26124 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122811.13713-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
reg_defaults must be sorted by ascending register address, since
regcache_lookup_reg() locates entries in it with bsearch(). When a table is
not sorted, bsearch() cannot find the entries which follow a descending step,
so regcache_reg_needs_sync() falls back to reporting that a sync is needed for
them. Those registers are then written to the device on every regcache_sync()
even when they were never touched.
See commit fd80df352b ("regcache: Add support for sorting defaults arrays")
for the same problem in a different context.
The series is based on broonie/for-linus (05eebef3c7).
Affected tables:
tegra210_i2s_reg_defaults 2 of 8 entries unreachable
tegra264_i2s_reg_defaults 4 of 9 entries unreachable
tegra210_mixer_reg_defaults 1 entry unreachable
Link: https://patch.msgid.link/20260805122748.13090-1-peter.ujfalusi@linux.intel.com
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
TEGRA210_MIXER_ENABLE (0x400) is the last entry of the table, after
TEGRA210_MIXER_PEAKM_RAM_CTRL (0x434), which makes it unreachable.
regcache_reg_needs_sync() then cannot compare it against its default and
reports that a sync is needed, so it is written to the device on every
regcache_sync() even when it was never touched.
Sort the table by register address.
Fixes: 05bb3d5ec6 ("ASoC: tegra: Add Tegra210 based Mixer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122748.13090-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
TEGRA264_I2S_ENABLE (0x100), TEGRA264_I2S_RX_FIFO_WR_ACCESS_MODE (0x30)
and TEGRA264_I2S_TX_FIFO_RD_ACCESS_MODE (0xb0) are listed at the end of
the table, after TEGRA264_I2S_TIMING (0x130), which leaves 4 of the 9
entries unreachable. regcache_reg_needs_sync() then cannot compare them
against their default and reports that a sync is needed, so they are
written to the device on every regcache_sync() even when they were never
touched.
Sort the table by register address.
Fixes: b3354438d8 ("ASoC: tegra: I2S: Add Tegra264 support")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122748.13090-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352b ("regcache: Add support for sorting defaults arrays").
TEGRA210_I2S_ENABLE (0x80) is listed after TEGRA210_I2S_CG (0x88) and
TEGRA210_I2S_TIMING (0xa4), so both it and TEGRA210_I2S_TIMING are
unreachable. regcache_reg_needs_sync() then cannot compare them against
their default and reports that a sync is needed, so they are written to
the device on every regcache_sync() even when they were never touched.
Sort the table by register address.
Fixes: c0bfa98349 ("ASoC: tegra: Add Tegra210 based I2S driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260805122748.13090-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
reg_defaults must be sorted by ascending register address, since
regcache_lookup_reg() locates entries in it with bsearch(). When a table is
not sorted, bsearch() cannot find the entries which follow a descending step,
so regcache_reg_needs_sync() falls back to reporting that a sync is needed for
them. Those registers are then written to the device on every regcache_sync()
even when they were never touched.
See commit fd80df352b ("regcache: Add support for sorting defaults arrays")
for the same problem in a different context.
The series is based on broonie/for-linus (05eebef3c7).
Affected tables:
sgtl5000_reg_defaults 1 of 35 entries unreachable
fsl_easrc_reg_defaults 3 of 120 entries unreachable
Link: https://patch.msgid.link/20260805122728.12362-1-peter.ujfalusi@linux.intel.com
